Post on 14-Jul-2018
transcript
Programme of mDa2016author underlined presenting author
Thursday 30 June 2016
8:45 mDa2016 opening (room a101, also called ‘auditorium’)
Session 1a – Welding
(Chair: GA Taber, AA Fernandes)
Session 1B – Polymers
(Chair: AJ Brunner)
Session 1C – metals
(Chair: SB Leen)
room a101 (auditorium) room B032 room B035
9:00 Explosive Welding of Aluminium to Copper: Structural and Morphological Analysis of Partial Overlap Welds (mDa16_135)
I Galvão (University of Coimbra, Portugal), RM Leal, R Mendes, JB Ribeiro, A Loureiro
Novel Shape Memory Thermosets with Enhanced Mechanical Properties for Actuator-like Applications (mDa16_106)
A Belmonte, A Fabregat-Sanjuan, X Fernández-Francos, S De la Flor (Universitat Rovira i Virgili, Spain)
An Experimental Approach to the Thermomechanical Characterization of a NiTiCu Shape Memory Alloy Using Strain Gauges (mDa16_91)
A Fabregat-Sanjuan (Universitat Rovira i Virgili, Spain), F Ferrando, S De la Flor
9:20 A Numerical Illustration of the Fusion Bonding Process (mDa16_70)
L Jusufi (Technical University Braunschweig, Germany), J Weimer, K Lippky, S Kreling, K Dilger
Protective UV-cured Polymers Functionalized by Graphene (mDa16_92)
M Periolatto (Free University of Bozen-Bolzano, Italy), P Russo Spena, M Sangermano
Wear Studies on Nicrofer C263 and Prediction of Wear Using Artificial Neural Network (mDa16_163)
PSC Bose (National Institute of Technology, India), K Jawale, CSP Rao
9:40 Local Mechanical Characterization of MIG Welded TWIP/TRIP Tailored Blanks (mDa16_86)
P Russo Spena (Free University of Bozen-Bolzano, Italy), L Cortese, F Nalli, K Májlinger
Evaluation of Gelatin Electrospun Fibers Crosslinked with 1,4 – butanediol Diglycidyl Ether for Skin Regeneration (mDa16_101)
JR Dias, PL Granja (Universidade do Porto, Portugal), PJ Bártolo
Experimental and Theoretical Analysis of the Formability Limits by Wrinkling in Sheet Metal Forming (mDa16_52)
JPG Magrinho (IDMEC, Portugal), CMA Silva, MB Silva, PAF Martins
10:00 On The Use of Electromagnetic Pulses for the Weld of Dissimilar Materials (mDa16_156)
I Oliveira (INEGI, Portugal), A Cavaleiro, A Reis, G Taber
Characterization of a Brittle Epoxy Toughened with Micro Cork Particles: Effect of Size, Amount and Surface Treatment (mDa16_59)
AQ Barbosa (INEGI, Portugal), LFM da Silva, J Abenojar, M Figueiredo, A Öchsner
10:20 Vaporizing Foil Actuated Welding (mDa16_116)
GA Taber (The Ohio State University, USA), BC Liu, A Vivek, GS Daehn
Industrial and Natural Waste Transformed into Raw Material (mDa16_90)
C Costa, M Monteiro, B Rangel (FEUP, Portugal), JL Alves
10:40-11:00 Coffee BreaK (room under the auditorium)
Session 2a – adhesive Bonding
(Chair: RD Adams, RJC Carbas)
Session 2B – Ceramics
(Chair: JL Alves)
Session 2C – Design
(Chair: RM Natal)
room a101 (auditorium) room B032 room B035
11:00 Effect of Uncertainties on the Strength of Adhesively Bonded Joints (mDa16_145)
N Carrere (Safran Composites, France), J Le Pavic, D Thevenet, E Martin, D Leguillon
Influence of Mold Material on Ceramic Disk Dimensions in Low Pressure Injection Molding (mDa16_20)
CA Costa (University of Caxias do Sul, Brazil), CR Altafini, FR Visioli, AP Baccin
Evaluation of the Stress Situation of Stator Bars in Thermal Cycle Tests as Basis for a Delamination Study (mDa16_26)
HKR Pothukuchi (Polymer Competence Center Leoben, Austria), PF Fuchs, G Pinter
11:20 Evaluation of Surface Treatment Methods for Adhesive bonding of Fiber Reinforced Polypropylene (mDa16_71)
Y Kuranaga (Tokyo Institute of Technology, Japan), T Ohnishi, H Okamoto, Y Sekiguchi, C Sato
Computational Studies of the Vacancies in Hydroxyapatite (mDa16_55)
VS Bystrov (IMPB RAS, Russia), RC Pullar, S Kopyl, C Piccirillo, J Coutinho
Mechanical Design of Buckling Beams for Low-stiffness Elastic Isolators (mDa16_29)
GS Mammano, E Dragoni (University of Modena and Reggio Emilia, Italy)
11:40 Comparison of Classic Type Lap Joints and S-Type Lap Joints Exposed to Tensile Loads (mDa16_17)
Ş Çitil (Adıyaman University, Turkey)
Modification of Physical Properties of Calcium-Copper-Titanate by Doping with Zinc (mDa16_96)
J Plewa, D Czekaj, A Lisińska-Czekaj, B Garbarz-Glos (Pedagogical University, Poland), W Bąk, T Juestel
Mechanical Characterization and Modelling of an Innovative Composite Material for Railway Applications (mDa16_46)
A Genovese (University of Naples, Italy), M Russo, S Strano
12:00 Evaluation of Analytical and Numerical Techniques for the Strength Prediction of Single-lap Bonded Joints with Different Adhesives (mDa16_68)
CCRG de Sousa, RDSG Campilho (ISEP, Portugal), EAS Marques, LFM da Silva
Characterization of WC Powders Synthesized Mechano-chemical Alloying (mDa16_100)
NÖ Aytekin (University of Istanbul Technical, Turkey), DB Ağaoğulları, ML Öveçoğlu
Optimization of Seat Foam Static Characteristics to Improve Seating Comfort (mDa16_51)
JH Bang (Kangwon National University, Korea), CA Lee, HS Kim, HY Kim, HJ Kim, KY Choi
12:20 The Production-related Influence of Iron Oxides on Steel Surfaces on the Adhesion of Fusion-bonded Hybrid Structures (mDa16_85)
T Reincke (Technische Universitat Braunschweig, Germany), S Kreling, K Dilger
Complexity of SrSi2O2N2:Eu Phosphor Formation Via the Solid State Reaction (mDa16_154)
D Michalik, B Adamczyk, M Sopicka-Lizer (Silesian University of Technology, Poland), J Barzowska, K Szczodrowski, M Grinberg
Design of a Composite System for Protection against Multiple Impact (mDa16_28)
MD Thouless (University of Michigan Ann Arbor, USA), EM Arruda, T Rahimzadeh
1st In
tern
atio
nal C
onfe
renc
e on
Mat
eria
ls D
esig
n an
d Ap
plica
tions
mDa
2016
12:40 Generalized Stress Intensity Factor in Single Lap Adhesive Joints with Different Configurations (mDa16_147)
A Akhavan-Safar (Iran University of Science and Technology, Iran), S Rastegar, MR Ayatollahi, LFM da Silva
13:00-14:00 LUNCH BreaK (room under the auditorium)
Session 3a – Composites
(Chair: N Carrere, R Campilho)
Session 3B – machining
(Chair: JL Alves)
Session 3C – metals
(Chair: SB Leen)
room a101 (auditorium) room B032 room B035
14:00 The Effect of Adhesive Modification and Surface Drying to Prevent the Consequences of Prebond Moisture on Structural Adhesive Bonds of Thermoplastic Composites (mDa16_78)
AT Bochtler (Volkswagen AG, Germany), NR Behrendt, S Suellentrop, N Ranke, K. Dilger
Investigation of Surface Roughness and Tool Wear in End Milling of Al7075-SiC Co-Continuous Composite (mDa16_88)
AS Prasanth (PSG College of Technology, India), R Ramesh, A Madhu
The Influence of Face Coat Material on Reactivity and Fluidity of the Ti6Al4V and TiAl alloys During Investment Casting (mDa16_97)
RL Neto (INEGI, Portugal), TP Duarte, JL Alves, TG Barrigana
14:20 Recycling of Fibre Reinforced Plastics (mDa16_18)
RD Adams (University of Oxford, UK)
A Review of the Machinability of Carbon Fiber Reinforced Polymer Composites (mDa16_24)
H Caliskan, D Ozkan (Kastamonu University, Turkey)
Crystal Plasticity Modelling of Effect of Grain Size on High Temperature Cyclic Response of a Tempered Martensite Ferritic Steel (mDa16_105)
M Li (NUI Galway, Ireland), RA Barrett, DF Li, PE O’Donoghue, NP O’Dowd, SB Leen
14:40 Design and Testing of Ceramic-aluminium Dual Adhesive Joints for High Temperature Applications (mDa16_60)
EAS Marques (INEGI, Portugal), M Flaviani, M Banea, C Sato, LFM da Silva
Machinability of an Aluminum Cast Alloy using PCD Tools for Turning (mDa16_157)
RB Soares, AP Jesus, RJL Neto (INEGI, Portugal), PAR Rosa, M Machado, A Reis
The Influence of Microstructure on Mechanical Behaviour for Dual Phase Steels (mDa16_113)
R Amaral (INEGI, Portugal), AD Santos, AB Lopes
15:00 Flaky and Fullerene-like WS2 Nanoparticles as Tribologic and Toughening Additives for Epoxy (mDa16_102)
D Haba (Empa, Switzerland), A Hausberger, AJ Brunner
Investigation and Application of Fe-Co-Cu Based Diamond Cutting Tools with Different Bronze Content Used in Marble Production (mDa16_36)
B Bulut (Istanbul Technical University, Turkey), O Tazegul, M Baydogan, ES Kayali
15:20 Graded Adhesive Joints by Nanoparticles Reinforcement (mDa16_76)
RJC Carbas (INEGI, Portugal), LFM da Silva, LFS Andrés
15:40 Cork and Renewable Energy (mDa16_19)
L Gil (Direção Geral de Energia e Geologia, Portugal)
16:00-16:20 Coffee BreaK (room under the auditorium)
Session 4a – metals
(Chair: PT de Castro)
Session 4B – Tribology
(Chair: J Seabra)
Session 4C – Natural fiber Composites
(Chair: J Ribeiro, L Queijo, J Rocha)
room a101 (auditorium) room B032 room B035
16:20 The Effect of Powder Size on Boronizing of Ductile Iron (mDa16_37)
F Unal (University of Istanbul Technical, Turkey), A Topuz
Physical Modelling of Tire Wear for the Analysis of the Influence of Thermal and Frictional Effects on Vehicle Performance (mDa16_33)
F Farroni (University of Naples, Italy), A Sakhnevych, F Timpone
Machining of Flax Fibers Reinforced Polymer Composite (mDa16_16)
J Delahaigue, JF Chatelain (Ecole de Technologie Supérieure, Canada), G Lebrun
16:40 Characterisation of a Nano-Strengthened 9Cr Steel for High Temperature Flexible Operating Conditions (mDa16_49)
EM O’Hara (NUI Galway, Ireland), RA Barrett, SB Leen
Development of the Fundamental Understanding of Leading Edge Erosion (mDa16_41)
KP Dyer (ORE Catapult, UK)
Green Recoating of Cotton Fiber by Different Starched Methods (mDa16_132)
JRN Macedo, DB Rocha (Federal University of ABC, Brazil), DS Rosa
17:00 An Experimental and Numerical Characterisation of Materials for Use in Biomass Co-firing (mDa16_65)
CP O’Hagan (NUI Galway, Ireland), SB Leen, RFD Monaghan
Improvement of Wear Resistance of Carbide Cutting Tools using Nanolayer AlTiN/TiN Hard Coating in Face Milling of Inconel 718 Superalloy (mDa16_25)
H Caliskan, B Kursuncu, P Panjan, D Ozkan (Kastamonu University, Turkey)
Coffee Powder Reused as a Composite Material (mDa16_123)
V Canavarro, B Rangel, JL Alves (FEUP, Portugal)
17:20 Selected Properties of P/M Ti-6Al-2Sn-4Zr-6Mo Alloy After Hot Deformation (mDa16_67)
M Wojtaszek (AGH University of Science and Technology, Poland), T Śleboda, G Korpała
Influence of Surface Preparation on Surface Topography and Tribological Behaviours (mDa16_74)
A Dzierwa (Rzeszow University of Technology, Poland)
Experimental Study on Effect of Tool Geometry on Hole Quality in Drilling of CFRP/Ti6Al4V Stacks (mDa16_80)
S El Bouami (University of Picardie Jules Verne, France), M Habak, G Franz, R Velasco, P Vantomme
1st In
tern
atio
nal C
onfe
renc
e on
Mat
eria
ls D
esig
n an
d Ap
plica
tions
mDa
2016
17:40 A Physically-based Creep Damage Model for 9Cr Steels Incorporating the Effects of Multiple precipitate Types (mDa16_73)
CÓ Murchú (NUI Galway, Ireland), RA Barrett, SB Leen, PE O’Donoghue
18:00 Characterization of Thermal Parameters and Microstructure of a Horizontally Solidified Sn-Sb Solder Alloy (mDa16_15)
OL Rocha (Science and Technology of Pará - IFPA, Brazil), TA Costa, MD Filho, A Garcia
19:00 Poster session and reCePTIoN (room under the auditorium)
metals
Poster 1 Sustainable Heusler Alloy Synthesized by Multi-Target Sputter Deposition (mDa16_42)
S Kurdi (University of Cambridge, UK), ZH Barber, AL Greer
Poster 2 Positron Annihilation Studies on Nanocrystalline Copper Thin Films Doped with Nitrogen (mDa16_72)
PM Gordo (University of Coimbra, Portugal), MF Ferreira Marques, MT Vieira
Ceramics
Poster 3 Processing and Crystal Structure of Strontium Bismuth Niobate-Based Ceramics (mDa16_94)
D Czekaj, A Lisińska-Czekaj, M Rerak, B Garbarz-Glos (Pedagogical University, Poland), W Bąk
Poster 4 Dielectric Behaviour of 2-Layered Aurivillius-Type Ferroelectric Ceramics (mDa16_95)
D Czekaj, A Lisińska-Czekaj, M Rerak, B Garbarz-Glos (Pedagogical University, Poland), W Bąk
Poster 5 Comparison of Physicochemical Properties of TiO2 Layer Deposited on 316 LVM Steel by Sol-gel and ALD Methods (mDa16_158)
W Walke (Silesian University of Technology, Poland), M Basiaga, A Hyla
Poster 6 Design of Nanocrystalline Cemented Carbides with High Hardness (mDa16_109)
MJ Kupczyk (Poznan University of Technology, Poland)
Poster 7 Application of Cutting Edges with High Durability Made of Nanocrystalline Cemented Carbides (mDa16_110)
MJ Kupczyk (Poznan University of Technology, Poland), P Siwak, J Komolka
Poster 8 Comparative Estimation of Properties of Cutting Edges made of Conventional and Sintered High Speed Steels (mDa16_111)
MJ Kupczyk (Poznan University of Technology, Poland), J Komolka
Poster 9 Extraction Temperature of Core Inserts in Ceramic Low Pressure Injection Molding (mDa16_21)
CA Costa (University of Caxias do Sul, Brazil), CR Altafini, WB Souza, R Coletto
Poster 10 Probing of Oxygen Vacancies in BaTiO3 Powder and Single Crystal by Micro-Raman Scattering (mDa16_82)
H Fukushima (National Defense Academy, Japan), H Oka, H Funakubo, H Uchida, H Moriwake, H Shima, K Nishida
Poster 11 Dielectric Spectroscopy Studies of Mixed Oxide Method-Derived Strontium Bismuth Niobate Ceramics (mDa16_112)
B Garbarz-Glos (Pedagogical University, Poland), D Czekaj, A Lisińska-Czekaj, M Rerak, W Bąk
Poster 12 Characteristics of SiO2 Layer Deposited by ALD Method on 316 LVM Stainless Steel Used in Cardiology (mDa16_159)
M Basiaga (Silesian University of Technology, Poland), W Walke, M Staszuk, W Kajzer
Natural fiber Composites
Poster 13 Cellulose Nanowhiskers Obtained From Waste Recycling of Paper Industry (mDa16_134)
AG Souza, DB Rocha (Universidade Federal do ABC, Brazil), DS Rosa
Smart material Design
Poster 14 Sustainable Smart Materials for Magnetostrictive and Magnetoelectric MEMS Application (mDa16_124)
W Huettenes (University of Cambridge, UK), ZH Barber
Poster 15 Novel Magnetically Actuated Thermal Switches (mDa16_61)
JB Puga, BD Bordalo, DJ Silva, MM Dias, JH Belo, JP Araújo, AM Pereira, J Ventura, JCRE Oliveira (FEUP, Portugal)
Design
Poster 16 Design of the Valve Actuation Mechanism of a Naturally Aspirated Four-Stroke Spark Ignition Internal Combustion Engine (mDa16_137)
FJQC de V. e Brito, P de F.V. Carvalheira (University of Coimbra, Portugal)
adhesive Bonding
Poster 17 Effect of Water on the Behaviour of Adhesives Modified with Thermally Expandable Particles (mDa16_34)
N Rolim (CEFET/RJ, Brazil), MD Banea, LFM da Silva, RJC Carbas, AQ Barbosa, S de Barros
Poster 18 Adhesive Joints with Hybrid Laminates Aluminium-CFRP (mDa16_44)
RJC Carbas, MP Palmares (FEUP, Portugal), LFM da Silva
1st In
tern
atio
nal C
onfe
renc
e on
Mat
eria
ls D
esig
n an
d Ap
plica
tions
mDa
2016
Poster 19 Fatigue Strength of Friction Stir Weld-bonded Joints (mDa16_89)
DFO Braga, J Santos (INEGI, Portugal), J Fortunato, PMGP Moreira, V Infante, LFM da Silva
Poster 20 Friction Stir Weld-bonding Joints Strength under Impact Loading (mDa16_77)
DFO Braga (INEGI, Portugal), J Fortunato, SC Constantino, PMGP Moreira, V Infante, LFM da Silva
Poster 21 eXtended Finite Element Method Applied to the Strength Prediction of Double-lap Bonded Joints (mDa16_69)
TF Santos, RDSG Campilho (ISEP, Portugal)
Poster 22 Impact and Damping Behavior of Composite Adhesive Joints (mDa16_150)
HAM Araujo (FEUP, Portugal), JJM Machado, EAS Marques, LFM da Silva
Poster 23 Use of Master Curves Based on Time-temperature Superposition to Predict Creep Failure of Aluminium-glass Adhesive Joints (mDa16_151)
EAS Marques (INEGI, Portugal), RJC Carbas, F Silva, LFM da Silva
Poster 24 Influence of the Weatherability on the Fracture Envelope of an Automotive Adhesive Joint (mDa16_152)
P Fernandes (FEUP, Portugal), G Viana, M Costa, MD Banea, LFM da Silva
Poster 25 Mode I Determination of CFRP as a Function of Temperature and Strain Rate (mDa16_48)
JJM Machado (INEGI, Portugal), EAS Marques, RDS Campilho, LFM da Silva
Poster 26 Static and Fatigue Assessment of the Mixed-Mode Behaviour of Adhesively Bonded Joints (mDa16_168)
MB Ferreira (FEUP, Portugal), R Carbas, M Costa, G Viana, EAS Marques, LFM da Silva, E Yokoi, S Nakada, T Furusawa
Welding
Poster 27 Numerical Investigations by FEM of the Influence of the Thermal Properties on Residual Stresses in a Multi-pass Butt-welded Joint (mDa16_146)
R Sepe (Second University of Naples, Italy), F Caputo
additive manufacturing
Poster 28 Development of Personalized Insoles with Additive Manufacturing (mDa16_130)
RJ Pinto, L Lopes, JL Alves, T Duarte (FEUP, Portugal)
Poster 29 Low Cost Filament Extruder Fabrication for 3D Printing (mDa16_128)
RK Kakati, IA Ferreira, L Santana, JL Alves (FEUP, Portugal)
Poster 30 Direct Digital Manufacturing: A Challenge to the Artistic Glass Production (mDa16_161)
I Sousa, R Felismina, A Mateus (Polytechnic Institute of Leiria, Portugal), C Malça
Poster 31 A Comparison Between Additive, Formative and Subtractive Manufacturing on the Fabrication of a Ti6Al4V Hip Prosthesis (mDa16_162)
M Couto, M Machado, A Cavaleiro, R Neto (INEGI, Portugal), A Reis, JL Alves
friday 1 July 2016
Session 5a – advanced Discretization Techniques
(Chair: J Belinha, C Roque)
Session 5B – Natural fiber Composites
(Chair: J Ribeiro, L Queijo, J Rocha)
Session 5C – Design
(Chair: MD Thouless, D Castagnetti)
room a101 (auditorium) room B032 room B035
9:20 Analysis of Layerwise Plates by Radial Basis Functions-Finite Differences Method (mDa16_35)
AJM Ferreira (FEUP, Portugal), AMA Neves, CMC Roque
Mechanical Characterization of Cytisus Scoparius Natural Fibre – a Preliminary Study (mDa16_120)
L Queijo (Polytechnic Institute of Bragança, Portugal), J Rocha, JE Ribeiro
Design of the Piston of an Internal Combustion Engine for a High Efficiency Vehicle (mDa16_136)
AJG de O Bizarro, P de FV Carvalheira (University of Coimbra, Portugal)
9:40 Differential Evolution Optimization for RBF-FD Meshless Method (mDa16_58)
CMC Roque (INEGI, Portugal), PALS Martins
Mechanical Properties Comparison of Autochthonous Natural Fibres Reinforced Polyester Composites: Flax and Hemp (mDa16_121)
J Rocha (Polytechnic Institute of Bragança, Portugal), L Queijo, JE Ribeiro
The Depletion of ZDDP Additives within Marine Lubricants and Associated Cylinder Liner Wear in RNLI Lifeboat Engines (mDa16_47)
M Anand, M Hadfield (Bournemouth University, UK), B Thomas, R Cantrill
10:00 The Elasto-static Analysis of Composite Plates Considering High-order Shear Deformation Theories (mDa16_108)
DES Rodrigues (INEGI, Portugal), J Belinha, AL Araújo, AJM Ferreira, LMJS Dinis, RM Natal Jorge
Factors Optimization to Improve the Tensile and Flexural Properties of Short Fibre Non-woven Hedgehog Chestnuts Spines Reinforced Polyester Composites (mDa16_119)
JE Ribeiro (Polytechnic Institute of Bragança, Portugal), J Rocha, L Queijo
Modelling of Soft Tissues with Damage (mDa16_155)
JPS Ferreira (INEGI, Portugal), MPL Parente, R Natal
10:20 The Biomechanical Bone Tissue Response Due to the Insertion of a Femoral Stem: a Meshless Study (mDa16_114)
J Belinha (INEGI, Portugal), MMA Peyroteo, S Vinga, LMJS Dinis, RM Natal Jorge
10:40-11:00 Coffee BreaK (room under the auditorium)
1st In
tern
atio
nal C
onfe
renc
e on
Mat
eria
ls D
esig
n an
d Ap
plica
tions
mDa
2016
Session 6a – Smart material Design
(Chair: A Spaggiari, D Castagnetti)
Session 6B – machining and additive manufacturing
(Chair: RL Neto)
Session 6C – metals
(Chair: MF Vieira)
room a101 (auditorium) room B032 room B035
11:00 Design and Assessment of an Electromagnetic Energy Harvester Based on Slotted Disc-Springs (mDa16_39)
D Castagnetti (University of Modena and Reggio Emilia, Italy), F Dallari
FE Modal and Harmonic Analysis of Micro Drill with Ultrasonic Horn (mDa16_104)
A Muddu (National Institute of Technology, India), MR Khan, A Shyamnarayan
Evaluation of the Ductile-to-brittle Transition Temperature in a Thermally Sprayed CoNiCrAlY Coating by Small Punch Multi-step Loading Tests (mDa16_38)
H Chen (University of Nottingham Ningbo China, China), J Yang, XL Xiao
11:20 Development of a Driveshaft Torque Transducer for Low-cost Structural Health Monitoring of Off-highway Vehicles (mDa16_45)
A Spaggiari, D Castagnetti, L Fornari, E Dragoni, N Golinelli (University of Modena and Reggio Emilia, Italy), G Gualdi, A Brunazzi
Optimization of Geometric Quality in 5 Axis Machining of Curved Surfaces in an EN-AW-7075 alloy by Taguchi Method (mDa16_125)
SD Castellanos (INEGI, Portugal), K Castro, LJ Segura, JL Alves
Influence of Hydrostatics Burnishing Strategy on the Surface Roughness of the X38CrMoV5-1 Steel (mDa16_62)
S Swirad (Rzeszow University of Technology, Poland), D Wydrzynski
11:40 SMA/GFRP High Damping Laminate Thin Plates (mDa16_57)
A Lo Conte (Politecnico di Milano, Italy), P Haghdoust
Formulations Development of Plaster Mixtures for Additive Manufacturing (mDa16_127)
DE Caetano, JL Alves (FEUP, Portugal), RL Neto, TP Duarte
Development of a New Hybrid High Strength Electric Cable (mDa16_8)
O Carvalho (University of Minho, Portugal), FS Silva, G Caldeira
12:00 Development of an Effective and User-friendly Numerical Framework for the Simulation of Complex Smart Material Components and Devices (mDa16_79)
E Boatti (University of Pavia, Italy), M Ferraro, G Scalet, F Auricchio
Influence of Post-Processing in 3D Binder Jetting Technology (mDa16_126)
EM Ocaña (Universidad de las Fuerzas Armadas–ESPE, Ecuador), JF Alves, RJ Neto
Effect of Strain Partitioning on Strain Rate Dependency of Tensile Behavior of a TRIP-aided Duplex Stainless Steel (mDa16_22)
JY Choi, HN Han, K-T Park (Hanbat Nat’l Univ., Rep. of Korea)
12:20 Geometry Optimization of a Magnetorheological Clutch Operated by Coils (mDa16_153)
F Bucchi (Università di Pisa, Italy), P Forte, F Frendo
Finite Element Analysis and Experimental Study of Plastic Lattice Structures Manufactured by Selective Laser Sintering (mDa16_27)
HL Choo (The University of Nottingham Ningbo China, China), J Niu, W Sun
Densification of Micro Hot-embossed Aluminium Feedstock (mDa16_143)
O Emadinia (FEUP, Portugal), MT Vieira, MF Vieira
12:40 Materials for Dielectric Elastomer Actuators and Generators (mDa16_131)
R Vertechy (University of Bologna, Italy), M Fontana
An Alternative Method to Produce Metal/Plastic Hybrid Components For Orthopedics Applications (mDa16_160)
M Silva, A Mateus (Polytechnic Institute of Leiria, Portugal), D Oliveira, C Malça
Solid State Reaction in Ni/Ti Multilayers Produced by Sputtering (mDa16_169)
S Simões, AS Ramos, F Viana, MF Vieira (Universidade de Coimbra, Portugal)
13:00-14:00 LUNCH BreaK (room under the auditorium)
Session 7a – adhesive Bonding
(Chair: C Sato, EAS Marques)
Session 7B – Composites
(Chair: AJM Ferreira)
Session 7C – Power generation
(Chair: S Muntean)
room a101 (auditorium) room B032 room B035
14:00 Methodology of Failure Load Prediction of Adhesive Bonding Structures (mDa16_117)
J Le Pavic (IRDL – CNRS, France), N Carrere, G Stamoulis, D Da Silva, D Thévenet
The Impact of Prepreg Aging on its Processability and the Post-Cure Mechanical Properties of Epoxy-Based CFRP (mDa16_83)
D Blass (Technische Universitat Braunschweig, Germany), S Kreling, K Dilger
Nonlinear Analysis of a Two-degree-of-freedom Energy Harvester (mDa16_53)
V Nico (University of Limerick, Limerick, Ireland), R Frizzell, J Punch
14:20 Moisture and Temperature Degradation of Structural Adhesives for the Automotive Industry (mDa16_75)
G Viana (INEGI, Portugal), M Costa, MD Banea, LFM da Silva
Assessing Epoxy-Composite Modification Developments by Comparison with Unmodified Reference Materials: Some Thoughts on Relevance (mDa16_103)
M Frey, D Haba, AJ Brunner (Empa, Switzerland)
Optimization Methods for a Nonlinear Energy Harvester Based on Velocity Amplification (mDa16_54)
E Boco (University of Limerick, Limerick, Ireland), R Frizzell, J Punch
14:40 Effect of Temperature on the Dynamic Response of Adhesively Mounted Accelerometers (mDa16_40)
A Spaggiari (University of Modena and Reggio Emilia, Italy), M Cocconcelli
Mechanical Behavior of Honeycomb Lattices Manufactured by Investment Casting for Scaffolding Applications (mDa16_122)
H Puga, VH Carneiro (University of Minho, Portugal), P Correira, J Barbosa, J Meireles
Experimental Investigations of MR Fluids in Air and Water Used for Brakes and Clutches (mDa16_63)
AI Bosioc (University Politehnica Timișoara, Romania), TE Beja, S Muntean, L Vékás
15:00 Influence of Humidity on the Static and Fatigue Response of Adhesively Bonded Aluminum Joints (mDa16_43)
M Costa (INEGI, Portugal), G Viana, LFM da Silva, RDSG Campilho
Optimization of Machining Parameters to Minimize Surface Roughness in Turning of Carbon and Glass Fiber Filled Polytetrafluoroethylene (mDa16_166)
Y Kaplan, ME Sanci (Pamukkale University, Turkey), S Halis
Hydrodynamic Investigations in a Swirl Generator Using a Magneto-rheological Brake (mDa16_64)
S Muntean (Romanian Academy, Romania), AI Bosioc, RA Szakal, I Borbáth, L Vékás, RF Susan-Resiga
15:20 Strength of Joints Bonded with Polyurethane Adhesives under Static or High-Rate Conditions of Combined Loading (mDa16_56)
Y Yamagata (Tokyo Institute of Technology, Japan), Y Sekiguchi, C Sato
Tribological Characteristics of Chopped Carbon Fiber and Nano Particles Reinforced Epoxy Composites by Using RSM Technique (mDa16_140)
K Dass (Maharaja Agrasen University, India), SR Chauhan, B Gaur
1st In
tern
atio
nal C
onfe
renc
e on
Mat
eria
ls D
esig
n an
d Ap
plica
tions
mDa
2016
15:40 Bonding Strength of Hot-formed Steel with an AlSi Coating and Approaches to Improve it by Laser Surface Engineering (mDa16_167)
A Wieczorek (Volkswagen, Germany), M. Graul, K Dilger
Study of Film Formation and Electrical Conductivity of PS Latex/MWCNT Composites (mDa16_129)
S Ugur (Istanbul Technical University, Turkey), O Yıldız
16:00-16:20 Coffee BreaK (room under the auditorium)
Session 8a – Design
(Chair: E Dragoni, AT Marques)
room a101 (auditorium)
16:20 Development and Validation of a Numerical Model of a Carbon Orthotic for Lower Limbs (mDa16_66)
G Bellavita, M Cocconcelli, D Castagnetti (University of Modena and Reggio Emilia, Italy), R Rubini
16:40 Optimal Design of Compressed Hydrogen Storage Vessels Using Multi-objective Genetic Algorithm (mDa16_99)
B Beylergil (Izmir Institute of Technology, Turkey), E Aktaș, M Tanoğlu, H Seçil Artem
17:00 Experimental Testing and Design Optimisation Study of a 14 m Composite Wind Turbine Blade (mDa16_107)
EF Fagan (NUI Galway, Ireland), A Doyle, T Flanagan, M Flanagan, SB Leen, O de la Torre, J Goggins
17:20 The Effect of Otitis Media with Effusion on Hearing, in the Standing and Resting Positions: a Numerical Study (mDa16_118)
B Areias (FEUP, Portugal), M Parente, F Gentil, R Natal
17:40 Hyperelastic Anisotropic Behavior of The Arterial Wall (mDa16_133)
K Aimene (University of Mouloud Mmmeri of Tizi-Ouzou, Algeria), MO Ouali
18:00 Novel Approach in Materials Selection for Reactor Pressure-Vessels Manufacturing (mDa16_115)
A Rodriguez-Prieto (UNED, Spain), AM Camacho, MA Sebastián
20:00 mDa2016 BaNQUeT (Taylor’s caves)
1st In
tern
atio
nal C
onfe
renc
e on
Mat
eria
ls D
esig
n an
d Ap
plica
tions
mDa
2016