Post on 20-Jan-2016
transcript
ProJet™ 5000 Professional 3D PrintersThe Best Gets Even Better!
www.printin3d.com | NYSE: DDD
NEW For 2012
Professional 3D Printers - 2012
ModelsModels PrototypesPrototypes Form-FitForm-Fit Rapid ToolingRapid Tooling MoldsMolds Casting PatternsCasting Patterns
2
AccurateAccurate PrecisePrecise Fine DetailsFine Details High CapacityHigh Capacity EconomicalEconomicalFunctional MaterialsFunctional Materials
Introducing The New ProJet™ 5000
3
• New higher resolution, higher-throughput print head
• Up to 750 x 750 x 890 DPI• Highest X/Y print resolution in 3D jet-printing
• Super sharp features• Micro-fine details
• More jets, increased throughput
• New High Speed build mode• Up to 2X faster build speed• Great for fast mockups & prototypes• 64 µ (0.0025 in.) Z-layer
ProJet™ 5000 Value
4
• Largest 3D Printer Build Size in its classLargest 3D Printer Build Size in its class• Highest print resolution in its class• Three build modes (HD/UHD/HS)• Huge build-size:
21.65 x 15.5 x 11.8 in. (550 x 393 x 300 mm)
• High accuracy & precision• Tough VisiJet® MX plastic w/ 20% elongation (flex)• Easy melt-away wax VisiJet® S300 supports • Exclusive 5-year Print-Head warranty• Remote email notification convenience• Most Affordable (cost/build-size)
Best-in-class material performance
Best-in-class edge & corner definition
Remarkable feature resolution
Unmatched surface smoothness
Exceptional sidewall quality
Best-in-class accuracy & precision
Printability… Parts That Match Your Design Intent
ProJet™ 5000: Larger Parts, More Parts, Awesome Parts!
6
Finest Detail Resolution
Features down to 0.01 inches (0.25mm)
No stair-stepping on curved sidewalls
Micro-fine features; razor-sharp definition
Fast, hands-free support removal
Part stacking & nesting
Quick job turn-around
High throughput capacity
Fast, easy job submission
Printability…Maximum Thru-put, Minimum Effort & Time
Fast, Easy Support Removal
• Wax supports simply melt away with no support scars• Hands-free process saves time and labor• Entire build platform of parts processed together – saves more time• No geometry limitations – wax melts out of inaccessible internal cavities• No physical force exerted on part that could damage delicate features• No chemicals required• Wax supports are inert, no special disposal required• No facilities requirement for water inlet or drain
Save Money by Using 15%-25% Less Material
• 3D Systems’ patented and proprietary Multi-Jet Modeling technology (MJM) has better print material yield and less waste
• No mixing of more expensive build material together with lower cost support material to form supports like other ink-jet style 3D printers
• No routine manual print head purging like other ink-jet style 3D printers reduces waste
• “No-force” support removal reduces damage requiring re-prints
Molten drop of material is jetted from printhead
Wax component causes drop to freeze upon contact remaining in place until curing takes place – better droplet control, less planarization (less waste)
Phase Change Materials
Affordable service plans
Highly trained local service technicians
Minimum maintenance
Extended print head warranties
Material efficient
Printability… Economical To Own & Operate
ProJetTM Print Heads Last…Guaranteed!
• ProJet™ printers have one “wide-pass” heavy-duty print head
• ProJet™ print heads don’t wear out like other ink-jet style 3D printers
• Save up to $20,000 or more over 5 years in print head replacements
Year# PHs
replaced Cost1 4 $4,000 2 4 $4,000 3 4 $4,000 4 4 $4,000 5 4 $4,000
Total 20 $20,000
Other Ink-jet 3D Printers
Precision
Performance
Productivity
ProJet™ Printability Can You Afford To Settle For Anything Less?
www.3dsystems.com NYSE: DDD
Thank YouThank You