Post on 18-Apr-2018
transcript
World Class DesignThe Command Access PS5 power supply is a regulated, linear power supply rated at 5 Amps @ 24VDC. It’s state-of-the-art, solid-state design offers a flexible and cost effective solution to powering and controlling low current DC locking devices such as mortise locks, cylindrical locks, panic trim and electric strikes while offering the built-in surge capacity to power up to eight latch pullback exit devices simultaneously*. This gives the installer the flexibility to control low current and high surge current devices together with one power supply. The unit offers a continuous 27.6V battery charging circuit while allowing adjustable output voltage (24-27VDC). The PS4 is available in 4, 6 and 8 I/O models to accommodate most filed conditions you might encounter.
Command Access is not a licensee, or affiliated, associated or connected with Ingersol Rand, Assa Abloy, Stanley, Schlage, Falcon, Von Duprin, Dorma, Sargent, Corbin Russwin, Yale, Emtek, Adams Rite, Best, Precision, Arrow, Design Hardware, Cal Royal, Jackson, AHT, Marshall Best, Marks, Accurate, Baldwin, FSB, PDQ, Lawrence, Trans Atlantic, Hager, LSDA, General Lock, or Omnia or any of their subsidiaries or affiliates.
PS5
Visit our website for more detailswww.commandaccess.com
Customer Support888-622-2377 or 714-449-1422
POWER SUPPLIES
* When used with Command Access modified exit devices with PM300/MM2/MM3 modules
Command Access is not a licensee, or affiliated, associated or connected with Ingersol Rand, Assa Abloy, Stanley, Schlage, Falcon, Von Duprin, Dorma, Sargent, Corbin Russwin, Yale, Emtek, Adams Rite, Best, Precision, Arrow, Design Hardware, Cal Royal, Jackson, AHT, Marshall Best, Marks, Accurate, Baldwin, FSB, PDQ, Lawrence, Trans Atlantic, Hager, LSDA, General Lock, or Omnia or any of their subsidiaries or affiliates.
FEATURES:
SPECIFICATIONS:
• UL 294 Listed• Class 2• CSA Listed (PS5-8 only)• Adjustable output voltage from 24-27VDC • Independent, Battery backup charging circuit at 27.6V with Solid-state design and very low voltage loss• Fire Alarm Link• Solid-state inputs/outputs (no relays required)• Euro style connectors for fast and easy terminations• 3-year “no hassle” warranty
• Input voltage - 110 VAC• Output voltage - 24VDC @ 5A continuous current• Up to (8) Solid-state inputs (specify dry contact or voltage trigger)• Up to (8) Solid-state outputs• LEDs - Red = power indicator / Green = Channel on• Thermal auto-resetable fuses• Enclosure dimensions - 12.5” x 15” x 4” (accommodates two 7AH batteries - batteries not included)
POWER SUPPLIES
Customer:
Model No.
Job No./Name:
Notes:
Date: Provided by:
PS5 OPTIONS CHART
1 output only
41
61
6
2
6
4
4
4
8
0
0
5A
Yes2
.83A
Yes2
1.25A
Yes2
.625A
Yes2
81
Yes
6
Yes
4
Yes
8
Yes
Power Supply OptionsPS5
INPUTS/OUTPUTS
VON DUPRIN FACTORY EL
CAT PM300HO
CAT PM300, MM2, & MM3
FIRE ALARM LINK
OUTPUT RATING
BATTERY BACKUP
PS5-6PS5-4 PS5-8
NOTES: 1. Up to stated devices depending on distribution board or relays (by others).2. Batteries not included.