Post on 13-Sep-2014
description
transcript
1
By Shrikant Athavale Prathith Consultants Pune India 30 Jan 2013
PSA Tapes The Applications
Volume Two
2
3
4
5
6
Closed cell tube and sheet insulation is a flexible, closed
cell and lightweight elastomeric material designed for
insulating liquid cooling and heating lines. The closed cell
structure of AEROFLEX provides many advantages over
most rigid insulations for cooling and heating lines .
It has stable thermal conductivity ( K. value ) during
service, ....due to its dense surface skin and closed cell
characteristics.
flexibility which makes installation work easy and neat.
outstanding ultraviolet and weather resistance.
AEROFLEX is an ideal insulation for frost control on cold
water plumbing. It prevents heat gain and condensation
problems on chilled water and refrigerant pipelines, and it
also prevents heat loss from hot water plumbing, liquid,
and dual temperature piping.
7
Chilled water Piping Insulation
In areas with high humidity, condensation
problems often occur in chilled water pipelines of
central cooling systems.
The condensation damages ceilings, carpeting
and other furniture. and wastes energy with higher
heat gain to the chilled water pipes.
Aeroflex closed cell insulation is being widely
used in chilled water.
very low water absorption. low and stable thermal
conductivity (K.Value). nonpolar polymer base with
high water and moisture resistance. universal
smoke and flammability proof standards.
flexibility for quick and easy installation. neat
appearance.
8
Hot water Piping Insulation
All advantages
described above
make
AEROFLEX an
ideal insulator
for solar energy
hot water
systems.
A stable K value
and outstanding
weather resistance
is offered
thoughout service
life. AEROFLEX is
widely used for
indoor and outdoor
heating & cooling
systems, replacing
fiberglass and
calcium silicate.
AEROFLEX has
outstanding
ultraviolet and
weather
resistance. The
service life under
normal conditions
for hot water pipes
is estimated at
more than 10
years.
Because of low
water absorption
and water vapor
transmission, no
protective
coating or jacket
is necessary
even for outdoor
piping.
9
Ducting System
Besides being the ideal insulation for chilled and hot water piping, AEROFLEX
is also used as insulation for all kinds of ducting systems.
AEROFLEX has been favoured over fibrous insulating materials mainly
because of the possible dangers and health hazards caused by fibrous
materials. AEROFLEX made from special modified elastomeric material
ensures long sevice life and can be safely handled without any danger of skin
irritation. It is also not hazardous to health and no special precaution is needed.
AEROFLEX has superior resistance against moisture, fungus growth, vermin
and rodent attack. Not messy and easy to install,it is also neat in appearance
because of its smooth surface. With low water absorption and low moisture
transmission, AEROFLEX can be used as internal and external insulation for all
kinds of ducting systems.
To suit different decorative purposes. AEROFLEX can also be coated with
Aerocoat, an acrylic latex emulsion paint.
10
AEROFLEX is neat in
appearance when used as
an external insulation for air
ducts.
AERFLEX is also
available in continuous
roll form for different
needs.
Because of its many advantages.
AEROFLEX is used widely in air
ducting systems.
AEROFLEX does not contain any
fibrous material, so it is safe to use in
direct contact with air.
11
Detailed Product Description
Aluminum foil fiberglass cloth for heat insulation of HVAC system and
vapor barrier.
1)Heat insulation, noise elimination, sound absorption
2)Used as duct jacket on the glass wool of an insulated flexible duct
Specifications:
1)Foil:7-micron
2)Fiberglass Cloth
3)PE
Aluminum foil fiberglass cloth for heat insulation of HVAC system and vapor barrier.
Residential
R+HEATSHIELD installed over
roof rafters reduces summer
heat gain in the attic, resulting
in lower energy costs for this
residence
Industrial
ASTRO-FOIL installed in this
fabricating facility brightens the
interior and reduces heat loss.
Industrial
ASTRO-FOIL installed in this
fabricating facility brightens the
interior and reduces heat loss.
12
Recreational Vehicles
These RV's have ULTRA-
DUCT insulated air-
conditioning ducts. The
ULTRA-DUCTS increase
the airflow and provide cooler
air for the entire unit.
ASTRO-FOIL products are
ideal for this commercial
structure. The lightweight,
versatile insulation will
reduce energy consumption
and cut building costs.
Agricultural
ASTRO-WHITE was installed
over the purlins in this horse
barn, to increase animal
comfort during the hot
summer months.
13
14
Duct Wrap Insulation
Product Description
Basic Use:
SoftTouch Duct Wrap Insulation is used to
insulate rectangular and round heating,
ventilating and air conditioning ductwork.
Benefits:
SoftTouch Duct Wrap Insulation provides
thermal efficiency that reduces unwanted
heat loss or gain from equipment and
ductwork. When properly installed in the
correct thickness, this product virtually
eliminates condensation problems on cold
duct surfaces.
15
16
R+HEATSHIELD is Innovative
Energy's line of radiant barrier
insulation products made from a
woven polyethylene material
covered by a metalized film. This
metalized film provides a
reflective surface that blocks 94
percent of radiant heat, so it helps
keep spaces cooler in summer
and warmer in winter.
R+HEATSHIELD can dramatically
improve thermal performance and
energy efficiency, keeping energy
costs lower and interior spaces
more comfortable.
Why Use Radiant Barrier?
Cuts energy consumption and costs
Improves interior comfort
An economical radiant barrier
insulation in attic spaces
Effective means of temperature control
in a wide variety of applications
Solid version qualifies as an air and
moisture barrier
Superior tear and puncture resistance
Can span eight feet unsupported
Environmentally safe and non-toxic
Lightweight; easy and safe to install
17
Reduce energy consumption and costs, improve building integrity
Innovative Energy offers a wide variety of products that help insulate and
protect virtually any type of structure. Our reflective insulation and radiant
barrier productsblock 94 percent of radiant heat. Depending on the
application, our reflective products can be used in addition to, or instead of,
mass insulation to significantly reduce energy consumption — helping to save
money while conserving our natural resources and environment.
To learn more about reflective insulation, click on Understanding Reflective
Insulation.
You can also fill out our simple form to Request More Information.
Key Facts About Our Reflective Insulation Products:
Increase energy efficiency
Cut energy consumption and costs
Improve interior comfort
Thin and lightweight
Nontoxic and fiberless
Easy and safe to install; no special protective gloves or clothing required
Reduce condensation or prevent moisture intrusion with select products
Products for virtually any structure:
Industrial & Commercial
Building Insulation Products
18
AstroShield, an improved version of the
product previously known as Astro Foil, is
a line of reflective insulation products
featuring polyethylene bubble film
sandwiched between two protective
sheets of strong metalized aluminum
polyester film. This metalized aluminum
film provides a reflective surface that
blocks 94 percent of radiant heat, unlike
fiberglass, foam or cellulose insulation,
which absorb heat. When materials
absorb heat, they merely slow down its
transfer. AstroShield can dramatically
improve thermal performance and energy
efficiency, keeping energy costs lower
and interior spaces more comfortable.
19
1. in your attic to prevent heat build-up during summer months and reduce heat loss during
winter.
2. in your sidewalls will improve the performance of mass insulation by reducing radiant heat
transfer, creating a more efficient building envelope.
3. to insulate below your radiant heated floors to reduce hot spots, prevent heat loss and
increase the efficiency of your radiant heating unit.
4. Keep your garage temperature more comfortable year-round
5. Seal your ducts by wrapping them. You will minimize energy use by keeping the air flowing
through the registers, not escaping into unwanted areas.
6. Line crawl spaces will help floors stay warm and dry, lowering your energy bills.Water
heaters are one of the most energy-consuming appliances in your home. Our easy-to-
install
7. Water Heater Insulation Jacket will improve water heater thermal performance and reduce
your energy needs.
20
reflective foil insulation consists
of two layers of polyethylene
bubble film sandwiched between
two layers of 99.9% pure
aluminum foil, making a structure
5/16-inch thick. Depending upon
the application, ASTRO-FOIL can
outperform 6" of mass insulation
in all climates. Even higher
performance can be expected in
hot, humid climates. ASTRO-FOIL
is excellent as a primary
insulation for buildings of all
types.
21
RV HvAc & OEM Insulation Products
Recreational Vehicles
Insulation and HVAC Products
Reflective insulation and radiant barriers are
key to maximizing thermal performance and
energy efficiency of insulation within an RV.
Innovative Energy products are perfectly
suited to help maintain comfortable internal
temperatures in an RV, especially in extreme
external air temperature situations. Unlike
mass insulation, Innovative Energy’s
reflective insulation products are very thin —
ideal for installation in the thin wall and roof
construction of an RV. The products' reflective
properties help prevent radiant heat transfer,
for energy efficiency and comfort year-round.
22
Temperature-Sensitive Machinery
For equipment that requires control of heat build-
up and proper flow of air in small spaces,
Innovative
Energy's AstroShield, astroECO andR+HEATSHI
ELD HD products fit the bill. These reflective
insulation products effectively block heat intrusion
and facilitate outstanding airflow in small spaces,
and can be customized to suit virtually any
application. Innovative Energy products help
achieve cost savings and increased energy
efficiency for a wide variety of equipment - HVAC
units, medical machinery and currency counting
machinery, just to name a few. Find out how
Innovative Energy can help keep your equipment
up and running.
23
Packing Insulation Products
Prevents heat insulation or heat loss
Polyethylene bubble film core cushions as it insulates
Reusable
Many styles available
in other Industry Such as
24
Insulation Electrical
25
applications involving splicing, bus bar insulation, weather and water proofing where
extra insulation and tough mechanical properties are required.
Flexible film based tape resistant to impregnating resins especially suitable for
final insulation of coils. Polyester film Tapes find electrical applications in
insulation class B. Application Area’s are
• manufacturing of capacitors
•for sealing the inner coil and for final wrapping of cast resin capacitors.
colored vinyl and polyethylene film backed tapes for a wide range of applications.
Products available in self-wound form or with silicone release liner.
26
In the motor industry for phase and coil end insulation for strengthening edges at slot
insulation as well as for slot insulation in general.
Due to different film thickness it is possible to achieve almost any degree of insulation. It
is important here that where there is a small winding radius a tape of the least thickness
is chosen, since the possibility of an opening of the insulation could otherwise not be
excluded owing to the inherent stiffness of the firm.
Due to the selection of different adhesive coatings such as heat resistant thermosetting,
heat sealing, Silicon adhesives. There is the possibility even in unfavorable conditions of
achieving optimal adhesion. A synthetic rubber based adhesive is suitable for use with
waxed or other kinds of greased wires or parts.
Tape is available with absolutely freon-resistant and can be exposed to an ultrasonic
cleaning process, without adhesive degradation.
Polyester film based Printable tape serves as an outer wrap for polyester capacitors has
excellent bonding properties with epoxy casting resins.
27
Polyester transparent film based tape is suitable for oil filled transformers , it
is resistant against most transformer oils including chlorinated oils.
Synthetic Fabrics based tapes serve as Outer wrap for motor coils, general
electrical insulation applications which require high impact strength and high
tensile strength in both directions.
Tear and temperature resistant tape, good impenetrability for traction machine
manufacturing for motors and transformers. Wrapping tape at high
temperatures.
Fiber Glass Fabrics based tapes are available for High strength application for
permanent fixing of TV tube to metal holding frame protects against tube
implosion.
NOMEX a synthetic non woven carrier , in combination with special adhesives
is an excellent insulator, which can also be worked economically in large
widths.
28
The appropriate material applied by the proper processing machinery will
ensure savings in time and money in electrical motor building accepted
especially in traction machine manufacturing small space requirement
good space factor. As machine wide material interesting insulation for
wrapping bar wound armature in narrow rolls as phase insulation also in
the general and transformer manufacturing industries.
This is coated with synthetic rubber adhesive which gives good adhesion
to adhesive repellent surfaces. This adhesive is appropriate for
temperature class F.
Tear and temperature resistant tape good impenetrability for traction
machine manufacturing for motors and transformers. Wrapping tape at
high temperatures.
NOMEX a class H material, in combination with special adhesives is an
excellent insulator which can also be worked economically in large widths.
29
Insulation tape are available for very high temperatures, radiation-
resistant for high stress conditions in traction machine manufacturing in
the production of generators for aerodynamic and space applications
which require the highest temperature reserves from the insulation.
Short time heat resistance upto 400 0C.
Tear and temperature resistant tape good impenetrability for traction
machine manufacturing for motors and transformers. Wrapping tape at
high temperature.
30
Electrical Shielding
Tapes
EMI Shielding Tapes (Electro-
Magnetic Interface) are designed for
applications requiring reliable point-
to-point contact, particularly EMI/RFI
(Radio Frequency Interface)
shielding, grounding and static
charge draining.
There are a wide range of tapes for
EMI shielding with both conductive
and non conductive adhesives.
31
PVC Electrical Insulation Tape
Flame Retardant
Self Extinguishing
Easy Tear
Easy Unwind
Flexible will conform to awkward
shapes
Water resistant
Aggresive adhesive
UV resistant
Conforms to BS EN 60454 Type 2
13 Colours, wide range of sizes
PVC Insulation Tapes
PVC insulation tapes are flame
retardant, self extinguishing and
offer good conformability. This
makes them ideal for cable and
wire insulation. Heat shrink
tubing is used for insulation and
sealing of low voltage cables.
Various grades are available for
general purpose and more
heavy duty applications.
32
Automotive: Loom harnessing with higher temperature areas of
the body compartment. Colour coding cables.
Brewery trade: Pipe wrapping.
Chemical: Insulation and corrosion protection. Masking during
chemical process plating.
Construction: Protection during shotblasting. Light duty
pipewrapping. Prevention of electrolytic corrosion.
Electronics: Degaussing and rotational coil wrapping. Insulating,
curcuit identification and cable bundling.
Electrical: Electrical insulation of cables. Colour coding
electrical cables.
Electrical appliance manufactures: Harnessing, waterproofing,
insulating, abrasion protection and packaging.
33
34
35
36
Glass Cloth Tapes
Glass cloth tapes are
used for high temperature
insulation applications and
provide a heat stable seal.
These tapes have a
thermosetting adhesive for
applications up to and in
escess of 180C.
AutomotiveWire Harnessing
tesa® Automotive Wire Harnessing tapes for
reliable and efficient bundling and protection of wire
harnesses.
Leading wire harness bundling and protection
tesa Automotive offers an extensive range of Wire
Harnessing tapes consisting of woven, non-woven
or film backings equipped with high-quality
adhesives. Products for the engine compartment
must be highly resistant to wear, temperature and
chemicals. Particularly in the vehicle interior, large-
diameter wire harnesses can be found. Main
requirements include good flexibility for easy
installation, secure bundling and sound-proofing
features.
tesa® Automotive products fulfill the international
OEM specifications for productive materials. The
innovative tesa® Sleeve range offers excellent
flexibility for wire harnesses and contributes
specifically to the optimization of processes and
increased efficiency. 37
in other Industry Such as
38
Industrial
Industrial Tapes
For packaging
For mounting , holding displays
For splicing joints
For various damping applications, like
Sound Damping
Vibration Damping
Dust prevention
For sealing gaps ,joints , cladding.
39
Aisle Marking
PSA Tapes are available for vinyl aisle marking tape is available in
13 colors and a full range of sizes providing many options for
coding, marking, and identifying floors, walls, and equipment. It
adheres well to most surfaces and is conformable.
Spiral Wrapping
PSA's based on P.V.C. and polyethylene film tapes combine controlled
unwind, exceptional conformability, and elastic memory allowing for
hand applied or automatic spiral wrapping on many surfaces. These
tapes are available in a variety of colors.
Color Coding
PSA Tape offers a full line of colored vinyl and polyethylene film backed
tapes for a wide range of applications. Products are available in self-
wound form and on silicone release liners.
40
Anodizing
PSA Tape offers two grades of P.V.C. tape with clean removal rubber
adhesive for anodizing. They are designed to conform tightly to
irregular surfaces, preventing leakage in the masked area, leaving a
clean sharp line.
Electroplating
vinyl, polyester, and nylon backed tapes effectively mask surfaces
during electroplating, by either the dipping or coating process.
Conformable P.V.C. tapes work well for process temperatures less than
176 Degrees F. For higher temperatures or where ketones, chlorinated
hydrocarbon and esters are present, polyester or nylon / silicone tapes
are recommended.
Auto Lens Repair
PSA Tapes are available for auto lens repair tape provides an
economical temporary repair solution for damaged and missing auto
lens filters. Tapes are available in clear, amber and translucent red. They
come in a variety of retail sizes and put-ups.
41
Autoclaving
PSA Tape offers a number of tapes designed to stand-up to repeated
exposure to autoclaving conditions. Applications include color coding,
masking, sealing, and splicing.
Chemical Protection
PSA Tapes based on polyethylene, polyester, and polyurethane tapes offer a
variety of performance characteristics for applications where protection from
chemical and solvent exposure is critical.
Die-Cutting
PSA's offer a variety of pressure sensitive film tapes that are die-cuttable. The
substrate backings include P.V.C., polyethylene, polypropylene,
polyester, nylon, and polyurethane. These substrates can be combined with
our full line of adhesives and dimensionally stable paper and film release
liners.
Film Splicing
PSA's based on polypropylene, polyester, and polyethylene splicing tapes are
designed for recyclable applications, high speed flying splices, high
temperature and for "hard to stick" splice applications. 42
Flame Retardant
PSA's based on flame retardant and flame resistant films and adhesives are
designed to meet many U.L. and F.A.R. specifications for electrical,
aerospace, and building applications.
High Temperature Masking
PSA's offer high temperature P.V.C., polypropylene, polyester, and nylon
masking tapes. These tapes exhibit exceptional conformability and masking
protection, and provide residue free and ghost free removability. Tapes are
manufactured with both high temperature rubber based and silicone adhesive
systems.
Identification
PSA,s based on full range of colored polyethylene and P.V.C. provide color
coding indentification for sealing, splicing, protecting, and insulating of
surfaces and materials for many applications
Media Blast Masking
PSA offers tough, abrasion resistant pressure sensitive films and tapes
designed to protect and mask a variety of surfaces from media blast
exposure.
43
Paint Masking
PATCO offers polypropylene and vinyl masking tapes which provide a fine
mask-off on straight, curved, compound surfaces with no tearing or buckling.
They are highly conformable, tough, and solvent resistant. PATCO's masking
tape provides clean removability from most surfaces.
Patching - P.V.C. and Plastic
PSA's based on P.V.C., polyethylene and polyurethane film tapes provide
tough, durable patches on many surfaces including seat covers, P.V.C. liners,
greenhouse films, construction sheeting, and most rigid surfaces.
Powdercoat Masking
PSA's based on polyester and nylon / silicone tapes provide excellent
masking protection during the powder coating process. Both are easy to apply
and remove cleanly without residue.
Safety / Warning
PSA's based on vinyl hazard warning tape provides bright continuous warning
stripes and will hold-up under heavy duty wear and traffic conditions. It is
conformable and resistant to oil grease and many solvents.
44
Screenprint Border and Blockout
PSa'a based on polyethylene and polyester screen block tapes provide an
easy to use, effective and economical method of protecting screen borders
and blocking out images. These tapes are conformable, solvent resistant and
will not damage fine mesh or leave residue on screens and frames.
Sealing
PSa's with highly conformable P.V.C., polyethylene and polyurethane film
tapes with a suitable aggressive chemical, solvent, and moisture resistant
adhesive systems, seal and protect even on irregular surfaces.
Shrink Wrap Exterior Sealing
PSA's based on polyethylene "hull tapes" combine a polyethylene film
backing with pressure sensitive clean removal adhesives. They are designed
to adhere aggressively to shrink film and boat hulls for extended periods, yet
will remove cleanly without residue.
45
AutomotiveSecurity Labeling
tesa® Automotive Laser Labels - reliable and
efficient solutions for all labeling needs.
High-precision laser marking technology
Whether it is VIN, certification, service, security or
warning and instruction information, a variety of
labeling systems is required throughout the vehicle.
Some labels have to be absolutely tamper-proof
and others have to resist extreme external
influences, e.g. in the engine area. tesa Automotive
offers a comprehensive assortment of laser labels
to fulfill all requirements, combining the knowledge
of laser marking technologies with expertise in self-
adhesive films.
Using a laser beam for label marking is the most
advanced industrial identification technology.
tesa® Laser Labels offer significantly higher
process efficiency and savings compared to metal
plates or printed labels.
46
Transfer Tapes
Transfer tapes are an unsupported film of adhesive
they can provide excellent conformity on uneven surfaces. applications include
– envelope manufacturers, label manufacturers, felts & tight woven cloths.
Scrim reinforced transfer tapes
offer similar conformity to conventional transfer tapes ,together with the added
benefit of providing extra strength needed on weak surfaces particularly
suitable for laminating onto foam and rubbers.
Adhesive Transfer Tapes are rolls of free-film pressure-sensitive adhesive
pre-applied to a special release liner. For application, the tape is simply
pressed, adhesive side down, to a surface and the liner is peeled off.
Adhesive Transfer Tapes are used for a variety of bonding and laminating
applications; ranging from gaskets, graphics, and other lightweight materials to
high bonding applications. Adhesive Transfer Tapes allow for good
conformability and good adhesive wet out. Transfer tapes are also used to
selectively island place adhesives on to other substrates prior to die cutting. 47
Tissue Tapes
Good as an all rounder application, tissue tapes provide good conformity
to most surfaces and are hand tearable for ease of application and as
with most of our products are available with levels of adhesion to suit a
wide range of applications.
Available in 1m wide rolls, slit rolls, fingerlift rolls and spools.
48
Filmic Tapes
Filmic tapes provide additional strength and stability to
otherwise weaker surfaces i.e. Foams, but are particularly
suitable for applying to smoother surfaces where it is possible
to achieve a full contact between the two surfaces.
49
Flame Retardant Tape
Flame Retardant Tapes FR or Flame
Resistant Tapes are often interchanged,
but have different meanings for different
applications. Flame or fire retardant
materials keep the fire from spreading
while fire or flame resistant materials are
designed to not catch fire. Typically,
materials with a flame resistant coating are
used in a variety of high temperature
environments, providing protection and
insulation, such as in the aerospace,
automotive, commercial vehicle,
construction, and marine industries
50
Pre Cut Insulation
Building and Construction
51
Lane Marking Indoor
Advance Tapes AT8 Lane
Marking Tape can be used
in factories, schools,
sports halls and public
places for effective
demarcation and guidance
within buildings.
52
Construction tape is used as a
re-enforcing tape which is
applied directly to the sub-floor
and under the full surface
Sigaway® or Sigaway®
Electronic releasable tapes for
re-enforcing seams or
perimeters of carpet over carpet
installations. It is generally not
required for solid vinyl.
53
is a fiber re-enforced VOC free acrylic
dry contact cement film adhesive in
roll form. It replaces solvent based or
water based contact cements in a
number of applications. Siga Contact
does not pose the fire or explosion
risks that are associated with solvent-
based contact adhesives. Siga
Contact can be used in small confined
space, such as in marine cabins or
aircraft. Siga Contact has excellent
shelf life and does not dry out. It is
freeze stable. Siga Contact adheres
instantly and saves the 30-45' waiting
time associated with liquid contact
cements. Siga Contact may be
applied off site to the skirting,
reducing labor on-site.
54
Lane Marking Outdoor
3M™ Scotchlane™ Outdoor Lane
Marking Tape delineates car
parks, roadways and all outdoor
areas quickly and with minimum
inconvenience.
The self adhesive metallic foil
materials come in 50mm and
100mm widths in yellow and
white.
55
Please feel free to contact us For more Information Our website : www.psadhesive.com Personal Email : psatechno@gmail.com Cell : 00 91 9850242282
56