Post on 10-Jan-2020
transcript
Standards published New International Standards published between 01 September and 30 September 2014
* Available in English only
** French version of standard previously published in English only
Price group
IIW International Institute of Welding
ISO/TR 18786:2014 * Health and safety in welding — Guidelines for risk assessment of welding fabrication activities
C
TC 2 Fasteners
ISO 10664:2014 Hexalobular internal driving feature for bolts and screws D
ISO 1891-2:2014 * Fasteners — Terminology — Part 2: Vocabulary and definitions for coatings G
TC 4 Rolling bearings
ISO 492:2014 Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
G
ISO 3290-1:2014 Rolling bearings — Balls — Part 1: Steel balls C
ISO 3290-2:2014 Rolling bearings — Balls — Part 2: Ceramic balls C
TC 8 Ships and marine technology
ISO 18611-1:2014 * Ships and marine technology — Marine NOx reduction agent AUS 40 — Part 1: Quality requirements
A
ISO 18611-2:2014 * Ships and marine technology — Marine NOx reduction agent AUS 40 — Part 2: Test methods
F
ISO 18611-3:2014 * Ships and marine technology — Marine NOx reduction agent AUS 40 — Part 3: Handling, transportation and storage
B
IEC/PAS 80005-3:2014
* Utility connections in port — Part 3: Low Voltage Shore Connection (LVSC) Systems — General requirements
F
TC 10 Technical product documentation
ISO 10628-1:2014 Diagrams for the chemical and petrochemical industry — Part 1: Specification of diagrams
C
TC 17 Steel
ISO 630-5:2014 * Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
C
ISO 630-6:2014 * Structural steels — Part 6: Technical delivery conditions for seismic-proof improved structural steels for building
C
ISO 683-18:2014 * Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products
G
ISO 16143-1:2014 * Stainless steels for general purposes — Part 1: Corrosion-resistant flat products F
ISO 4995:2014 * Hot-rolled steel sheet of structural quality B
TC 22 Road vehicles
ISO 18541-1:2014 * Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 1: General information and use case definition
F
ISO 18541-2:2014 * Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 2: Technical requirements
E
ISO 18541-3:2014 * Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 3: Functional user interface requirements
C
ISO 15007-1:2002 Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters
B
TC 23 Tractors and machinery for agriculture and forestry
ISO 11783-12:2014 Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 12: Diagnostics services
E
TC 28 Petroleum products and lubricants
ISO/TR 19686-1:2014
* Petroleum products — Equivalency of test method determining the same property — Part 1: Atmospheric distillation of petroleum products
B
TC 29 Small tools
ISO 6103:2014 Bonded abrasive products — Permissible unbalances of grinding wheels as delivered — Static testing
D
TC 34 Food products
ISO 12228-2:2014 Determination of individual and total sterols contents — Gas chromatographic method — Part 2: Olive oils and olive pomace oils
C
ISO/TS 17383:2014 Determination of the triacylglycerol composition of fats and oils — Determination by capillary gas chromatography
C
TC 35 Paints and varnishes
ISO 2813:2014 Paints and varnishes — Determination of gloss value at 20 degrees, 60 degrees and 85 degrees
D
ISO 13803:2014 Paints and varnishes — Determination of haze on paint films at 20 degrees B
TC 39 Machine tools
ISO 14955-1:2014 Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools
F
ISO 230-10:2011/Amd 1:2014
Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools — Amendment 1: Measuring performance with scanning probes
XZ
TC 42 Photography
ISO 18938:2014 * Imaging materials — Optical discs — Care and handling for extended storage D
TC 44 Welding and allied processes
ISO 25980:2014 Health and safety in welding and allied processes — Transparent welding curtains, strips and screens for arc welding processes
B
TC 45 Rubber and rubber products
ISO 6806:2014 Rubber hoses and hose assemblies for use in oil burners — Specification B
ISO 17324:2014 * Rubber hoses for automotive turbochargers — Specification C
ISO 27126:2014 * Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals — Specification
D
ISO 4097:2014 * Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure C
ISO 4659:2014 * Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) — Evaluation procedure
B
ISO 7663:2014 * Halogenated isobutene-isoprene rubber (BIIR and CIIR) — Evaluation procedures
B
ISO 2440:1997/Amd 2:2014
Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 2
XZ
TC 61 Plastics
ISO 17541:2014 * Plastics — Quantitative evaluation of scratch-induced damage and scratch visibility
C
ISO 15512:2014 Plastics — Determination of water content D
ISO 22007-6:2014 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
B
ISO 12000:2014 Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods
A
ISO 19066-1:2014 Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
B
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO 19338:2014 * Performance and assessment requirements for design standards on structural concrete
B
TC 79 Light metals and their alloys
ISO 6361-2:2014 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties
G
ISO 6361-3:2014 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions
A
ISO 6361-4:2014 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions
C
ISO 6362-2:2014 * Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and D
profiles — Part 2: Mechanical properties
ISO 6362-7:2014 * Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition
A
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 16641:2014 Measurement of radioactivity in the environment — Air — Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors
C
TC 106 Dentistry
ISO 16635-2:2014 Dentistry — Dental rubber dam instruments — Part 2: Clamp forceps A
TC 121 Anaesthetic and respiratory equipment
ISO 5359:2014 Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases
D
TC 127 Earth-moving machinery
ISO 17253:2014 * Earth-moving machinery and rough-terrain variable-reach trucks — Design requirements for machines intended to be driven on road
C
TC 131 Fluid power systems
ISO 16908:2014 Hydraulic filter element test methods — Thermal conditioning and cold start-up simulation
C
TC 147 Water quality
ISO 16308:2014 Water quality — Determination of glyphosate and AMPA — Method using high performance liquid chromatography (HPLC) with tandem mass spectrometric detection
D
ISO 9308-1:2014 Water quality — Enumeration of Escherichia coli and coliform bacteria — Part 1: Membrane filtration method for waters with low bacterial background flora
B
TC 150 Implants for surgery
ISO 12891-2:2014 * Retrieval and analysis of surgical implants — Part 2: Analysis of retrieved surgical implants
E
ISO 5832-4:2014 Implants for surgery — Metallic materials — Part 4: Cobalt-chromium-molybdenum casting alloy
A
ISO 5832-11:2014 Implants for surgery — Metallic materials — Part 11: Wrought titanium 6-aluminium 7-niobium alloy
A
TC 160 Glass in building
ISO 11485-3:2014 Glass in building — Curved glass — Part 3: Requirements for curved tempered and curved laminated safety glass
B
TC 164 Mechanical testing of metals
ISO 6506-1:2014 Metallic materials — Brinell hardness test — Part 1: Test method C
ISO 6506-2:2014 Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
C
ISO 6506-3:2014 Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
B
ISO 6506-4:2014 Metallic materials — Brinell hardness test — Part 4: Table of hardness values B
TC 171 Document management applications
ISO/TR 17797:2014 * Electronic archiving — Selection of digital storage media for long term preservation
D
ISO/TR 18160:2014 * Document management — Digital preservation — Analog recording to silver-gelatin microform
B
TC 172 Optics and photonics
ISO 14135-1:2014 * Optics and photonics — Specifications for telescopic sights — Part 1: General-purpose instruments
A
ISO 14135-2:2014 * Optics and photonics — Specifications for telescopic sights — Part 2: High-performance instruments
A
ISO 9345-2:2014 * Microscopes — Imaging distances related to mechanical reference planes — Part 2: Infinity-corrected optical systems
B
ISO 8598-1:2014 Optics and optical instruments — Focimeters — Part 1: General purpose instruments
E
ISO 11978:2014 Ophthalmic optics — Contact lenses and contact lens care products — Labelling B
ISO 11979-6:2014 Ophthalmic implants — Intraocular lenses — Part 6: Shelf-life and transport stability testing
B
ISO 14730:2014 Ophthalmic optics — Contact lens care products — Antimicrobial preservative efficacy testing and guidance on determining discard date
D
ISO 18259:2014 * Ophthalmic optics — Contact lens care products — Method to assess contact lens care products with contact lenses in a lens case, challenged with bacterial and fungal organisms
B
ISO/TS 19979:2014 * Ophthalmic optics — Contact lenses — Hygienic management of multipatient use trial contact lenses
B
IEC 80601-2-58:2014
* Medical electrical equipment — Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
G
TC 173 Assistive products for persons with disability
ISO 7176-22:2014 Wheelchairs — Part 22: Set-up procedures E
TC 189 Ceramic tile
ISO 10545-1:2014 Ceramic tiles — Part 1: Sampling and basis for acceptance B
TC 190 Soil quality
ISO 14388-1:2014 Soil quality — Acid-base accounting procedure for acid sulfate soils — Part 1: Introduction and definitions, symbols and acronyms, sampling and sample
C
preparation
ISO 14388-2:2014 Soil quality — Acid-base accounting procedure for acid sulfate soils — Part 2: Chromium reducible sulfur (CRS) methodology
C
TC 193 Natural gas
ISO/TR 22302:2014 Natural gas — Calculation of methane number B
ISO 16960:2014 Natural gas — Determination of sulfur compounds — Determination of total sulfur by oxidative microcoulometry method
B
TC 194 Biological and clinical evaluation of medical devices
ISO 10993-3:2014 Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity
E
TC 195 Building construction machinery and equipment
ISO 18650-2:2014 Building construction machinery and equipment — Concrete mixers — Part 2: Procedure for examination of mixing efficiency
D
TC 201 Surface chemical analysis
ISO 17560:2014 * Surface chemical analysis — Secondary-ion mass spectrometry — Method for depth profiling of boron in silicon
B
TC 204 Intelligent transport systems
ISO/TS 21219-2:2014
* Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 2: UML modelling rules
F
TC 207 Environmental management
ISO/TS 14071:2014 Environmental management — Life cycle assessment — Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006
B
TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ISO 15189:2012 * Medical laboratories — Requirements for quality and competence G
TC 213 Dimensional and geometrical product specifications and verification
ISO 16610-71:2014 Geometrical product specifications (GPS) — Filtration — Part 71: Robust areal filters: Gaussian regression filters
D
TC 215 Health informatics
ISO 17090-4:2014 * Health informatics — Public key infrastructure — Part 4: Digital Signatures for healthcare documents
D
ISO 22600-1:2014 Health informatics — Privilege management and access control — Part 1: Overview and policy management
E
ISO 22600-2:2014 Health informatics — Privilege management and access control — Part 2: Formal models
D
ISO 22600-3:2014 Health informatics — Privilege management and access control — Part 3: Implementations
G
TC 217 Cosmetics
ISO 17516:2014 Cosmetics — Microbiology — Microbiological limits A
TC 244 Industrial furnaces and associated processing equipment
ISO 13577-2:2014 * Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems
H
JTC 1 Information technology
ISO/IEC 8824-1:2008/Cor 2:2014
* Information technology — Abstract Syntax Notation One (ASN.1): Specification of basic notation — Part 1: — Technical Corrigendum 2
free
ISO/IEC 8824-4:2008/Cor 1:2014
* Information technology — Abstract Syntax Notation One (ASN.1): Parameterization of ASN.1 specifications — Part 4: — Technical Corrigendum 1
free
ISO/IEC 8825-1:2008/Cor 2:2014
* Information technology — ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) — Part 1: — Technical Corrigendum 2
free
ISO/IEC 8825-4:2008/Cor 2:2014
* Information technology — ASN.1 encoding rules: XML Encoding Rules (XER) — Part 4: — Technical Corrigendum 2
free
ISO/IEC 8825-5:2008/Cor 2:2014
* Information technology — ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 — Part 5: — Technical Corrigendum 2
free
ISO/IEC 17811-3:2014
* Information Technology — Device control and management — Part 3: Specification of Reliable Message Delivery Protocol
C
ISO/IEC 1539-1:2010/Cor 3:2014
* Information technology — Programming languages — Fortran — Part 1: Base language — Technical Corrigendum 3
free
ISO/IEC 18031:2011/Cor 1:2014
* Information technology — Security techniques — Random bit generation — Technical Corrigendum 1
free
ISO/IEC 19772:2009/Cor 1:2014
* Information technology — Security techniques — Authenticated encryption — Technical Corrigendum 1
free
ISO/IEC 27001:2013/Cor 1:2014
* Information technology — Security techniques — Information security management systems — Requirements — Technical Corrigendum 1
free
ISO/IEC 27002:2013/Cor 1:2014
* Information technology — Security techniques — Code of practice for information security controls — Technical Corrigendum 1
free
ISO/IEC 18000-7:2014
* Information technology — Radio frequency identification for item management — Part 7: Parameters for active air interface communications at 433 MHz
H
Standards confirmed The following International Standards are confimred for a five year period:
TC 2 Fasteners
ISO 1478:1999 (reconfirmed)
ISO 10666:1999 (reconfirmed)
ISO 15480:1999 (reconfirmed)
ISO 15481:1999 (reconfirmed)
ISO 15482:1999 (reconfirmed)
ISO 15483:1999 (reconfirmed)
ISO 4042:1999
TC 5 Ferrous metal pipes and metallic fittings
ISO 3419:1981 (reconfirmed)
ISO 7005-2:1988 (reconfirmed)
ISO 7005-3:1988 (reconfirmed)
TC 6 Paper, board and pulps
ISO 8791-3:2005
TC 8 Ships and marine technology
ISO 15516:2006 (reconfirmed)
TC 20 Aircraft and space vehicles
ISO 2574:1994 (reconfirmed)
ISO 5866:1983 (reconfirmed)
ISO 6859-1:1982 (reconfirmed)
ISO 8668-1:1986 (reconfirmed)
ISO 8668-3:1994 (reconfirmed)
ISO 5843-1:1985 (reconfirmed)
ISO 5843-8:1988 (reconfirmed)
TC 22 Road vehicles
ISO 6813:1998 (reconfirmed)
ISO 12353-2:2003 (reconfirmed)
ISO 13216-1:1999 (reconfirmed)
ISO 13216-2:2004 (reconfirmed)
TC 23 Tractors and machinery for agriculture and forestry
ISO 789-12:2000
ISO 11520-1:1997 (reconfirmed)
ISO 17080:2005 (reconfirmed)
TC 24 Particle characterization including sieving
ISO 13317-1:2001
ISO 13318-1:2001
ISO 15900:2009
ISO 15901-3:2007
ISO 21501-2:2007
ISO 21501-3:2007
TC 28 Petroleum products and lubricants
ISO 2049:1996 (reconfirmed)
TC 29 Small tools
ISO 13942:2000
ISO 691:2005 (reconfirmed)
ISO 1174-2:1996 (reconfirmed)
ISO 1703:2005 (reconfirmed)
ISO 9243:1988 (reconfirmed)
TC 30 Measurement of fluid flow in closed conduits
ISO 6817:1992 (reconfirmed)
ISO 13359:1998 (reconfirmed)
TC 34 Food products
ISO 659:2009
ISO 3727-3:2003 (reconfirmed)
ISO 5764:2009
ISO 6730:2005 (reconfirmed)
ISO 7889:2003 (reconfirmed)
ISO 8156:2005 (reconfirmed)
ISO 8262-1:2005 (reconfirmed)
ISO 8262-2:2005 (reconfirmed)
ISO 8262-3:2005 (reconfirmed)
ISO 8967:2005 (reconfirmed)
ISO 9232:2003 (reconfirmed)
ISO 11866-1:2005 (reconfirmed)
ISO 11866-2:2005 (reconfirmed)
ISO 13875:2005 (reconfirmed)
ISO 14461-1:2005 (reconfirmed)
ISO 14461-2:2005 (reconfirmed)
ISO 14674:2005 (reconfirmed)
ISO 15322:2005 (reconfirmed)
ISO 22935-1:2009
ISO 22935-2:2009
ISO 22935-3:2009
ISO 26323:2009
ISO/TS 19036:2006 (reconfirmed)
ISO 5983-2:2009
TC 35 Paints and varnishes
ISO 11998:2006
ISO 8501-3:2006 (reconfirmed)
ISO 11126-9:1999 (reconfirmed)
TC 36 Cinematography
ISO 2404:1986 (reconfirmed)
ISO 6035:1983 (reconfirmed)
TC 38 Textiles
ISO 4167:2006 (reconfirmed)
ISO 105-F10:1989 (reconfirmed)
ISO 7768:2009
ISO 7769:2009
ISO 7770:2009
TC 39 Machine tools
ISO 230-3:2007
TC 44 Welding and allied processes
ISO 5173:2009
ISO 14327:2004
ISO 5172:2006 (reconfirmed)
ISO/TR 17671-2:2002
ISO 9455-17:2002
TC 45 Rubber and rubber products
ISO 1307:2006 (reconfirmed)
ISO 1401:1999 (reconfirmed)
ISO 1402:2009
ISO 1436:2009
ISO 2398:2006 (reconfirmed)
ISO 3949:2009
ISO 4023:2009
ISO 4079:2009
ISO 4080:2009
ISO 5774:2006 (reconfirmed)
ISO 7662:1988 (reconfirmed)
ISO 8031:2009
ISO 5478:2006 (reconfirmed)
ISO 705:1994 (reconfirmed)
ISO 1125:1999 (reconfirmed)
ISO 1126:2006 (reconfirmed)
ISO 1304:2006 (reconfirmed)
ISO 1409:2006 (reconfirmed)
ISO 1658:2009
ISO 2006-1:2009
ISO 2006-2:2009
ISO 2028:1999 (reconfirmed)
ISO 2930:2009
ISO 4655:1985 (reconfirmed)
ISO 6209:2009
ISO 6225-1:2006 (reconfirmed)
ISO 8312:1999 (reconfirmed)
ISO 9252:1989 (reconfirmed)
ISO 11235:1999 (reconfirmed)
ISO/TS 16176:2011
ISO 20299-1:2006 (reconfirmed)
ISO 21171:2006 (reconfirmed)
ISO 21869:2006 (reconfirmed)
ISO 22768:2006 (reconfirmed)
ISO 2231:1989 (reconfirmed)
ISO 2321:2006 (reconfirmed)
ISO 4646:1989 (reconfirmed)
ISO 5979:1982 (reconfirmed)
ISO 6451:1982 (reconfirmed)
ISO 25518:2009
TC 46 Information and documentation
ISO 8459:2009
ISO 28500:2009
TC 47 Chemistry
ISO 11014:2009
TC 58 Gas cylinders
ISO 25760:2009
TC 59 Buildings and civil engineering works
ISO 13640:1999 (reconfirmed)
TC 61 Plastics
ISO 10093:1998
ISO 1269:2006 (reconfirmed)
ISO 16770:2004
TC 69 Applications of statistical methods
ISO 5725-5:1998 (reconfirmed)
ISO 11843-4:2003 (reconfirmed)
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO 1920-5:2004 (reconfirmed)
ISO 6274:1982 (reconfirmed)
ISO 6782:1982 (reconfirmed)
ISO 6783:1982 (reconfirmed)
ISO 7033:1987 (reconfirmed)
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO 8536-3:2009
TC 86 Refrigeration and air-conditioning
ISO/R 916:1968 (reconfirmed)
TC 94 Personal safety -- Protective clothing and equipment
ISO 13982-2:2004
ISO 16602:2007
TC 98 Bases for design of structures
ISO 4354:2009
TC 100 Chains and chain sprockets for power transmission and conveyors
ISO 13203:2005 (reconfirmed)
TC 106 Dentistry
ISO 4049:2009
ISO 6877:2006 (reconfirmed)
ISO/TS 14569-2:2001
(reconfirmed)
TC 108 Mechanical vibration, shock and condition monitoring
ISO 19499:2007
ISO 2631-1:1997 (reconfirmed)
ISO 2631-
1:1997/Amd 1:2010
ISO 5805:1997 (reconfirmed)
TC 110 Industrial trucks
ISO 5053:1987 (reconfirmed)
TC 113 Hydrometry
ISO 4362:1999 (reconfirmed)
TC 117 Fans
ISO 27327-1:2009
TC 118 Compressors and pneumatic tools, machines and equipment
ISO 5388:1981 (reconfirmed)
TC 119 Powder metallurgy
ISO 2740:2009
ISO 3327:2009
TC 122 Packaging
ISO 6590-1:1983 (reconfirmed)
ISO 6591-1:1984 (reconfirmed)
ISO 6591-2:1985 (reconfirmed)
ISO 6599-1:1983 (reconfirmed)
ISO 7023:1983 (reconfirmed)
ISO 7965-1:1984 (reconfirmed)
ISO 7965-2:1993 (reconfirmed)
ISO 8367-1:1993 (reconfirmed)
ISO 8367-2:1993 (reconfirmed)
ISO 15867:2003 (reconfirmed)
TC 126 Tobacco and tobacco products
ISO 18144:2003 (reconfirmed)
ISO 18145:2003 (reconfirmed)
ISO 21147:2003 (reconfirmed)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 1167-2:2006 (reconfirmed)
ISO 18672-1:2009
TC 146 Air quality
ISO 15767:2009
ISO 16622:2002 (reconfirmed)
ISO 16000-14:2009
TC 147 Water quality
ISO/TS 20612:2007 (reconfirmed)
ISO 22478:2006 (reconfirmed)
ISO 23631:2006 (reconfirmed)
ISO 14442:2006 (reconfirmed)
TC 153 Valves
ISO 7121:2006 (reconfirmed)
TC 156 Corrosion of metals and alloys
ISO 10062:2006 (reconfirmed)
ISO 11306:1998 (reconfirmed)
ISO 11474:1998 (reconfirmed)
ISO 11782-1:1998 (reconfirmed)
ISO 11782-2:1998 (reconfirmed)
ISO 11844-1:2006 (reconfirmed)
ISO 11844-2:2005 (reconfirmed)
ISO 16151:2005 (reconfirmed)
ISO 16784-1:2006 (reconfirmed)
ISO 16784-2:2006 (reconfirmed)
ISO 17475:2005 (reconfirmed)
TC 163 Thermal performance and energy use in the built environment
ISO 12567-2:2005 (reconfirmed)
TC 165 Timber structures
ISO 16670:2003 (reconfirmed)
TC 171 Document management applications
ISO 11506:2009
TC 172 Optics and photonics
ISO 10110-8:2010
ISO 10935:2009
ISO 11884-1:2006 (reconfirmed)
ISO 11884-2:2007 (reconfirmed)
TC 174 Jewellery
ISO 11489:1995 (reconfirmed)
TC 190 Soil quality
ISO 11272:1998 (reconfirmed)
ISO 11274:1998 (reconfirmed)
ISO 11508:1998 (reconfirmed)
TC 192 Gas turbines
ISO 21789:2009
TC 201 Surface chemical analysis
ISO 23812:2009
TC 206 Fine ceramics
ISO 15732:2003 (reconfirmed)
ISO 18452:2005 (reconfirmed)
ISO 18755:2005 (reconfirmed)
ISO 18756:2003 (reconfirmed)
ISO 20502:2005 (reconfirmed)
ISO 20505:2005 (reconfirmed)
ISO 20508:2003 (reconfirmed)
ISO 24369:2005 (reconfirmed)
ISO 24370:2005 (reconfirmed)
ISO 26423:2009
JTC 1 Information technology
ISO/IEC 11801:2002
ISO/IEC 19793:2008
ISO/IEC 19796-3:2009
Standards withdrawn Period from 01 September to 30 September 2014
TC 10 Technical product documentation
ISO 10628:1997 (replaced by ISO 10628-1:2014, ISO 10628-2:2012)
TC 17 Steel
ISO 4952:2006 (replaced by ISO 630-5:2014)
ISO 24314:2006 (replaced by ISO 630-6:2014)
TC 20 Aircraft and space vehicles
ISO/PAS 21100:2011 (replaced by ISO 21100:2014)
TC 34 Food products
ISO 12228:1999 (replaced by ISO 12228-1:2014, ISO 12228-2:2014)
TC 61 Plastics
ISO 10366-1:2002 (replaced by ISO 19066-1:2014)
TC 172 Optics and photonics
ISO 8598:1996 (replaced by ISO 8598-1:2014)
TC 215 Health informatics
ISO/TS 22600-1:2006 (replaced by ISO 22600-1:2014)
ISO/TS 22600-2:2006 (replaced by ISO 22600-2:2014)
ISO/TS 22600-3:2009 (replaced by ISO 22600-3:2014)
Meeting calendar (update at 01 September 2014)
Meetings called for the month of August are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
September-November 2014
4-4 Beijing (China) TC 83 Sports and other recreational facilities and equipment
September-October 2014
22-3
Salamanca (Spain) JTC 1/SC 17 Information technology/Cards and personal identification
29- Berlin (Germany) PC 272 Forensic sciences
2
29-3
Bad Kohlgrub (Germany)
TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices
29-3
Paris (France) TC 218 Timber
30-1
London (United Kingdom)
PC 286 Collaborative business relationship management -- Framework
30-3
Fortaleza (Brazil) TC 28 Petroleum products and lubricants
October 2014
1 Fortaleza (Brazil) TC 28/SC 4 Petroleum products and lubricants/Classifications and specifications
1 Fortaleza (Brazil) TC 28/SC 7 Petroleum products and lubricants/Liquid Biofuels
1 Milan (Italy) TC 39/SC 4 Machine tools/Woodworking machines
3 Colombo (Sri Lanka)
JTC 1/SC 2 Information technology/Coded character sets
3 Paris (France) TC 86/SC 1 Refrigeration and air-conditioning/Safety and environmental requirements for refrigerating systems
3 Paris (France) TC 86/SC 8 Refrigeration and air-conditioning/Refrigerants and refrigeration lubricants
6 Seattle (USA) JTC 1/SC 31 Information technology/Automatic identification and data capture techniques
6 Genoa (Italy) TC 8/SC 12 Ships and marine technology/Ships and marine technology - Large yachts
6 Bremen (Germany) TC 20/SC 6 Aircraft and space vehicles/Standard atmosphere
6-8 Bremen (Germany) TC 20 Aircraft and space vehicles
6-10
Sao Paulo (Brazil) JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)
6-10
Berlin (Germany) TC 215 Health informatics
6-11
Prague (Czech Republic)
TC 135 Non-destructive testing
8 Virtual (Unknown) President's committee
President's committee
8 Hamburg (Germany)
TC 8/SC 7 Ships and marine technology/Inland navigation vessels
8 San Antonio (USA) TC 70 Internal combustion engines
8 Vienna (Austria) TC 138/SC 6 Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for all applications
8-9 San Antonio (USA) TC 70/SC 8 Internal combustion engines/Exhaust gas emission measurement
8-10
London (United Kingdom)
TC 25 Cast irons and pig irons
9 Beijing (China) TC 180/SC 1 Solar energy/Climate - Measurement and data
9 Beijing (China) TC 180/SC 4 Solar energy/Systems - Thermal performance, reliability and durability
9-10
Bremen (Germany) TC 20/SC 4 Aircraft and space vehicles/Aerospace fastener systems
10 Tokyo (Japan) TC 17/SC 7 Steel/Methods of testing (other than mechanical tests and chemical analysis)
10 Copenhagen (Denmark)
TC 34/SC 18 Food products/Cocoa
10 Paris (France) TC 92/SC 1 Fire safety/Fire initiation and growth
10 Beijing (China) TC 180 Solar energy
13-14
Troy (USA) TC 22/SC 11 Road vehicles/Safety glazing materials
13-15
Miami (USA) TC 44/SC 3 Welding and allied processes/Welding consumables
13-15
Antigua (Guatemala)
TC 285 Clean cookstoves and clean cooking solutions
13-16
Tromsø (Norway) TC 67/SC 8 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Arctic operations
13-17
London (United Kingdom)
TC 131 Fluid power systems
13-17
Kuala Lumpur (Malaysia)
TC 181 Safety of toys
14-16
Suzhou (China) TC 164/SC 5 Mechanical testing of metals/Fatigue testing
14-17
Buenos Aires (Argentina)
TC 279 Innovation management
15 Suzhou (China) TC 164/SC 1 Mechanical testing of metals/Uniaxial testing
15 Suzhou (China) TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
15-16
Pirmasens (Germany)
TC 137 Footwear sizing designations and marking systems
15-17
Toronto (Canada) TC 212 Clinical laboratory testing and in vitro diagnostic test systems
16 Suzhou (China) TC 164/SC 3 Mechanical testing of metals/Hardness testing
16 Pirmasens (Germany)
TC 216 Footwear
16-17
Praha (Czech Republic)
TC 58/SC 2 Gas cylinders/Cylinder fittings
16-17
Suzhou (China) TC 164/SC 2 Mechanical testing of metals/Ductility testing
17 Tokyo (Japan) TC 22/SC 7 Road vehicles/Injection equipment and filters for use on road vehicles
17 London (United Kingdom)
TC 131/SC 5 Fluid power systems/Control products and components
17 London (United Kingdom)
TC 131/SC 9 Fluid power systems/Installations and systems
17 Seoul (Korea, Republic of)
TC 153 Valves
17 Seoul (Korea, Republic of)
TC 153/SC 1 Valves/Design, manufacture, marking and testing
20-21
Seoul (Korea, Republic of)
TC 209 Cleanrooms and associated controlled environments
20-22
Liège (Belgium) TC 266 Biomimetics
20-23
Tokyo (Japan) TC 23/SC 17 Tractors and machinery for agriculture and forestry/Manually portable forest machinery
20-24
London (United Kingdom)
JTC 1/SC 6 Information technology/Telecommunications and information exchange between systems
20-24
Mexico City (Mexico)
JTC 1/SC 27 Information technology/IT Security techniques
20-24
Strasbourg (France) JTC 1/SC 29 Information technology/Coding of audio, picture, multimedia and hypermedia information
20-24
Prague (Czech Republic)
TC 121/SC 6 Anaesthetic and respiratory equipment/Medical gas systems
20-24
Nunspeet (Netherlands)
TC 149/SC 1 Cycles/Cycles and major sub-assemblies
20-24
Incheon (Korea, Republic of)
TC 154 Processes, data elements and documents in commerce, industry and administration
20-24
St. Petersburg, Florida (USA)
TC 188/SC 1 Small craft/Personal safety equipment
20-24
Berlin (Germany) TC 190 Soil quality
20-24
Berlin (Germany) TC 190/SC 1 Soil quality/Evaluation of criteria, terminology and codification
20-24
Berlin (Germany) TC 190/SC 2 Soil quality/Sampling
20-24
Berlin (Germany) TC 190/SC 3 Soil quality/Chemical methods and soil characteristics
20- Berlin (Germany) TC 190/SC 4 Soil quality/Biological methods
24
20-24
Berlin (Germany) TC 190/SC 7 Soil quality/Soil and site assessment
21 Seoul (Korea, Republic of)
TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (including land drainage)
21 Virtual (Unknown) TC 173/SC 2 Assistive products for persons with disability/Classification and terminology
21-23
Seoul (Korea, Republic of)
TC 58/SC 3 Gas cylinders/Cylinder design
22 Vienna (Austria) TC 123/SC 2 Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions
22 Vienna (Austria) TC 123/SC 3 Plain bearings/Dimensions, tolerances and construction details
22 Seoul (Korea, Republic of)
TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies
22 Seoul (Korea, Republic of)
TC 138/SC 4 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels
22-23
Paris (France) TC 22/SC 9 Road vehicles/Vehicle dynamics and road-holding ability
23 Vienna (Austria) TC 123/SC 5 Plain bearings/Quality analysis and assurance
23 Vienna (Austria) TC 123/SC 6 Plain bearings/Terms and common items
23 Seoul (Korea, Republic of)
TC 138/SC 3 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications
23 Seoul (Korea, Republic of)
TC 138/SC 5 Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications
23 Seoul (Korea, Republic of)
TC 138/SC 7 Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of plastics materials
23 Seoul (Korea, Republic of)
TC 138/SC 8 Plastics pipes, fittings and valves for the transport of fluids/Rehabilitation of pipeline systems
23-24
Seoul (Korea, Republic of)
TC 58 Gas cylinders
23-24
Tokyo (Japan) TC 79/SC 2 Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
23-24
Pretoria (South Africa)
TC 178 Lifts, escalators and moving walks
24 Sydney (Australia) TC 92/SC 3 Fire safety/Fire threat to people and environment
24 Sydney (Australia) TC 92/SC 4 Fire safety/Fire safety engineering
24 Vienna (Austria) TC 123 Plain bearings
24 Vienna (Austria) TC 123/SC 7 Plain bearings/Special types of plain bearings
24 Seoul (Korea, Republic of)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
24 Paris (France) TC 227 Springs
27 Panama (Panama) TC 8/SC 6 Ships and marine technology/Navigation and ship operations
27 Panama (Panama) TC 8/SC 11 Ships and marine technology/Intermodal and Short Sea Shipping
27 Panama (Panama) TC 8/SC 13 Ships and marine technology/Marine technology
27-29
London (United Kingdom)
PC 280 Management Consultancy
27-30
St-Louis (USA) JTC 1/SC 22 Information technology/Programming languages, their environments and system software interfaces
27-31
Panama (Panama) TC 8 Ships and marine technology
27-31
Vancouver (Canada)
TC 204 Intelligent transport systems
27-31
Berlin (Germany) TC 264 Fireworks
28 Toronto (Canada) TC 59/SC 8 Buildings and civil engineering works/Sealants
28 Vienna (Austria) TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
28-29
New York (USA) TC 5 Ferrous metal pipes and metallic fittings
28-29
Berlin (Germany) TC 23/SC 3 Tractors and machinery for agriculture and forestry/Safety and comfort
28-29
Paris (France) TC 290 Online reputation
28-30
Sydney (Australia) TC 17/SC 1 Steel/Methods of determination of chemical composition
29 Toronto (Canada) TC 59/SC 14 Buildings and civil engineering works/Design life
29 Toronto (Canada) TC 59/SC 15 Buildings and civil engineering works/Performance description of houses
29 Vienna (Austria) TC 79 Light metals and their alloys
29 London (United Kingdom)
TC 104/SC 2 Freight containers/Specific purpose containers
29-31
Tokyo (Japan) TC 20/SC 10 Aircraft and space vehicles/Aerospace fluid systems and components
31 Toronto (Canada) TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages
31 Toronto (Canada) TC 59/SC 17 Buildings and civil engineering works/Sustainability in buildings and civil engineering works
November 2014
1 Toronto (Canada) TC 59 Buildings and civil engineering works
1 Toronto (Canada) TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in building construction
1 Toronto (Canada) TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works
2-7 Belfort (France) TC 184/SC 4 Automation systems and integration/Industrial data
3-4 Tel Aviv (Israel) TC 282/SC 1 Water re-use/Treated wastewater re-use for Irrigation
3-5 Madrid (Spain) PC 252 Natural gas fuelling stations for vehicles
3-5 Washington, D.C (USA)
TC 241 Road traffic safety management systems
3-7 Singapore (Singapore)
PC 277 Sustainable procurement
3-7 Cape Town (South Africa)
TC 45 Rubber and rubber products
3-7 Cape Town (South Africa)
TC 45/SC 1 Rubber and rubber products/Rubber and plastics hoses and hose assemblies
3-7 Cape Town (South Africa)
TC 45/SC 2 Rubber and rubber products/Testing and analysis
3-7 Wuhan (China) TC 183 Copper, lead, zinc and nickel ores and concentrates
3-7 New Delhi (India) TC 229 Nanotechnologies
3-7 Lisbon (Portugal) TC 282 Water re-use
5-6 Lisbon (Portugal) TC 34/SC 4 Food products/Cereals and pulses
5-6 Tel Aviv (Israel) TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems
6 Cape Town (South Africa)
TC 45/SC 4 Rubber and rubber products/Products (other than hoses)
6 Istanbul (Turkey) TC 270 Plastics and rubber machines
7 San Diego (USA) TC 22/SC 10 Road vehicles/Impact test procedures
7 San Diego (USA) TC 22/SC 12 Road vehicles/Passive safety crash protection systems
7 Cape Town (South Africa)
TC 45/SC 3 Rubber and rubber products/Raw materials (including latex) for use in the rubber industry
10-11
Edinburgh (United Kingdom)
TC 171/SC 2 Document management applications/Application issues
11-14
Ottawa (Canada) TC 244 Industrial furnaces and associated processing equipment
12 LEMONT (USA) TC 22/SC 3 Road vehicles/Electrical and electronic equipment
13-14
Berlin (Germany) TC 182/SC 1 Geotechnics/Geotechnical investigation and testing
14-20
Beijing (China) TC 130 Graphic technology
15-20
Abu Dhabi (United Arab Emirates)
JTC 1 Information technology
17-21
Florida (USA) TC 108/SC 2 Mechanical vibration, shock and condition monitoring/Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures
18-20
Madrid (Spain) TC 34/SC 7 Food products/Spices, culinary herbs and condiments
19 Trondheim (Norway)
TC 234 Fisheries and aquaculture
19-21
Delft (Netherlands) TC 23/SC 13 Tractors and machinery for agriculture and forestry/Powered lawn and garden equipment
20 Virtual (Unknown) CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
24-28
Paris (France) PC 287 Chain of custody of wood and wood-based products
24-28
Shenzen (China) TC 211 Geographic information/Geomatics
26-28
Frankfurt (Germany)
* TC 184/SC 1 Automation systems and integration/Physical device control
28 London (United Kingdom)
TC 158 Analysis of gases
December 2014
1-4 Copenhagen (Denmark)
TC 98 Bases for design of structures
1-5 Dublin (Ireland) TC 260 Human resource management
3-5 Tokyo (Japan) TC 232 Learning services outside formal education
3-5 Paris (France) TC 269 Railway applications
4-5 Fukuoka (Japan) TC 197 Hydrogen technologies
8-10
London (United Kingdom)
TC 147/SC 3 Water quality/Radioactivity measurements
9-12
Madrid (Spain) PC 273 Customer contact centres
17 Frankfurt (Germany)
TC 291 Domestic gas cooking appliances
1-4 Copenhagen (Denmark)
TC 98/SC 2 Bases for design of structures/Reliability of structures
1-4 Copenhagen (Denmark)
TC 98/SC 3 Bases for design of structures/Loads, forces and other actions
January 2015
12-16
Weinheim (Germany)
* TC 69/SC 4 Applications of statistical methods/Applications of statistical methods in process management
19-20
Toledo (Spain) JTC 1/SC 37 Information technology/Biometrics
19-23
Copenhagen (Denmark)
* JTC 1/SC 35 Information technology/User interfaces
22-23
Cape Town (South Africa)
* TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes
25-29
Foshan (China) TC 107 Metallic and other inorganic coatings
25-29
Foshan (China) ** TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
25-29
Foshan (China) ** TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings
February 2015
2-5 Beijing (China) TC 257 Evaluation of energy savings
3-13
London (United Kingdom)
* TC 213 Dimensional and geometrical product specifications and verification
11 Geneva (Switzerland)
* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
22-23
Miami (USA) * TMB Technical Management Board
St. Petersburg, Florida (USA)
** TC 115 Pumps
March 2015
9-13
(Unknown) ** TC 110/SC 4 Industrial trucks/Rough-terrain trucks
9-13
Morioka (Japan) * TC 223 Societal security
12 West Conshohocken (Philadelphia) (USA)
TC 221 Geosynthetics
17- Geneva * COUNCIL Council
18 (Switzerland)
23-27
Vienna (Austria) * JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)
Rio de Janeiro (Brazil)
** PC 287 Chain of custody of wood and wood-based products
March-June 2015
25-26
Nara (Japan) * TC 184 Automation systems and integration
March-April 2015
31-2
Montreal (Canada) * TC 20/SC 9 Aircraft and space vehicles/Air cargo and ground equipment
1st Quarter 2015
(United Kingdom) ** PC 284 Management system for private security operations - Requirements with guidance
Paris (France) * TC 24/SC 4 Particle characterization including sieving/Particle characterization
Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests
April 2015
13-14
Lyon (France) TC 117 Fans
13-17
Tienjin (China) ** TC 161 Control and protective devices for gas and/or oil burners and appliances
13-17
(Czech Republic) ** TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
20-24
San Francisco (USA)
* TC 215 Health informatics
21-22
(Kazakhstan) ** TC 67/SC 2 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems
23 Düsseldorf (Germany)
* TC 44/SC 11 Welding and allied processes/Qualification requirements for welding and allied processes personnel
24 Atlanta (USA) ** TC 6/SC 2 Paper, board and pulps/Test methods and quality specifications for paper and board
25 Atlanta (USA) ** TC 6 Paper, board and pulps
(France) ** TC 29 Small tools
(France) ** TC 29/SC 9 Small tools/Tools with defined cutting edges, cutting items
(USA) ** TC 34/SC 15 Food products/Coffee
May 2015
1-7 (United Kingdom) ** TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment
4-7 Toronto (Canada) * TC 68 Financial services
4-8 Kuching (Malaysia) ** JTC 1/SC 27 Information technology/IT Security techniques
4-8 (Unknown) ** TC 36 Cinematography
8-15
Tokyo (Japan) ** TC 10 Technical product documentation
11-12
Kuching (Malaysia) * JTC 1/SC 27 Information technology/IT Security techniques
11-15
Ohio (USA) ** TC 184/SC 5 Automation systems and integration/Interoperability, integration, and architectures for enterprise systems and automation applications
11-16
Bologna (Italy) ** TC 130 Graphic technology
12-15
London (United Kingdom)
** TC 156 Corrosion of metals and alloys
13 Paris (France) ** TC 87 Cork
18-22
(Brazil) ** JTC 1/SC 40 Information technology/IT Service Management and IT Governance
18-22
London (United Kingdom)
** TC 4 Rolling bearings
18-22
Chengdu (China) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
18-22
Luzern (Switzerland)
* TC 114 Horology
22 Cape Town (South Africa)
* TC 228 Tourism and related services
26-29
(Argentina) ** TC 85/SC 5 Nuclear energy, nuclear technologies, and radiological protection/Nuclear fuel cycle
27 London (United Kingdom)
** TC 67/SC 5 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe
Glasgow, Scotland (United Kingdom)
** JTC 1/SC 32 Information technology/Data management and interchange
8-15
Tokyo (Japan) ** TC 10/SC 1 Technical product documentation/Basic conventions
8-15
Tokyo (Japan) ** TC 10/SC 6 Technical product documentation/Mechanical engineering documentation
8-15
Tokyo (Japan) ** TC 10/SC 10 Technical product documentation/Process plant documentation
Madrid (Spain) ** TC 23/SC 18 Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems
Tokyo (Japan) ** TC 113 Hydrometry
Tokyo (Japan) ** TC 113/SC 1 Hydrometry/Velocity area methods
Tokyo (Japan) ** TC 113/SC 2 Hydrometry/Flow measurement structures
Tokyo (Japan) ** TC 113/SC 5 Hydrometry/Instruments, equipment and data management
Tokyo (Japan) ** TC 113/SC 6 Hydrometry/Sediment transport
Tokyo (Japan) ** TC 113/SC 8 Hydrometry/Ground water
London (United Kingdom)
** TC 131/SC 6 Fluid power systems/Contamination control
June 2015
1-5 Sapporo (Japan) ** TC 42 Photography
1-5 Seattle (USA) * TC 43/SC 3 Acoustics/Underwater acoustics
1-6 Philadelphia (USA) ** TC 147 Water quality
3-5 (Japan) ** TC 145 Graphical symbols
8-12
Berlin (Germany) ** TC 121 Anaesthetic and respiratory equipment
9-12
Pretoria (South Africa)
** REMCO Committee on reference materials
10-11
(France) ** TC 17/SC 9 Steel/Tinplate and blackplate
15-19
Vancouver (Canada)
** TC 22/SC 13 Road vehicles/Ergonomics applicable to road vehicles
17-18
Geneva (Switzerland)
* TMB Technical Management Board
18-19
Frankfurt (Germany)
* TC 184/SC 2 Automation systems and integration/Robots and robotic devices
21-26
Matsue (Japan) ** TC 37 Terminology and other language and content resources
22-25
Avignon (France) * TC 54 Essential oils
22-26
(Netherlands) ** TC 34/SC 9 Food products/Microbiology
22-26
(China) ** TC 69 Applications of statistical methods
22- Göteborg (Sweden) * TC 188 Small craft
26
Matsue (Japan) ** JTC 1/SC 28 Information technology/Office equipment
(Australia) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training
Zurich (Switzerland) ** TC 17/SC 17 Steel/Steel wire rod and wire products
Beijing (China) ** TC 46 Information and documentation
Mexico City (Mexico)
** TC 242 Energy Management
(Unknown) ** TC 268/SC 1 Sustainable development in communities/Smart community infrastructures
June-July 2015
30-3
(Cyprus) ** TC 193 Natural gas
30-3
(Cyprus) ** TC 193/SC 3 Natural gas/Upstream area
2nd Quarter 2015
(Europe) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Protective clothing
Istanbul (Turkey) ** TC 120 Leather
(China) ** TC 172/SC 7 Optics and photonics/Ophthalmic optics and instruments
Vico Equense (Italy) ** TC 184/SC 4 Automation systems and integration/Industrial data
1st Semester 2015
London (United Kingdom)
** TC 8/SC 8 Ships and marine technology/Ship design
(USA) ** TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres
July 2015
1-7 Berlin (Germany) * TC 91 Surface active agents
(USA) ** TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
August 2015
26-28
Jeju (Korea, Republic of)
* TC 206 Fine ceramics
August-September 2015
31-4
Hokaido (Japan) * JTC 1/SC 35 Information technology/User interfaces
September 2015
1-6 (Canada) ** TC 163 Thermal performance and energy use in the built environment
1-6 (Canada) ** TC 205 Building environment design
7-14
Sydney (Australia) ** TC 96 Cranes
13-17
Lahaina, Hawaii (USA)
** TC 127 Earth-moving machinery
14-25
Berlin (Germany) * TC 213 Dimensional and geometrical product specifications and verification
15-16
Seoul (Korea, Republic of)
* TMB Technical Management Board
16-18
Seoul (Korea, Republic of)
* GA General Assembly
17-18
Moscow (Russian Federation)
** TC 197 Hydrogen technologies
19 Seoul (Korea, Republic of)
** COUNCIL Council
Vienna (Austria) ** TC 33 Refractories
Paris (France) ** TC 34/SC 17 Food products/Management systems for food safety
(Japan) ** TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings
Seattle (USA) ** TC 201/SC 6 Surface chemical analysis/Secondary ion mass spectrometry
(Netherlands) ** TC 258 Project, programme and portfolio management
2nd-3rd Quarter 2015
(Europe) ** TC 126/SC 1 Tobacco and tobacco products/Physical and dimensional tests
October 2015
15-17
Seattle (USA) * TC 201 Surface chemical analysis
19-23
(Germany) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
26-30
New Delhi (India) * JTC 1/SC 27 Information technology/IT Security techniques
28-30
Tsukuba (Japan) ** TC 202 Microbeam analysis
Madrid (Spain) ** TC 10/SC 8 Technical product documentation/Construction documentation
(Netherlands) ** TC 34/SC 2 Food products/Oleaginous seeds and fruits and oilseed meals
(Netherlands) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils
Nairobi (Kenya) ** TC 38 Textiles
Nairobi (Kenya) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
Nairobi (Kenya) ** TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests
Nairobi (Kenya) ** TC 38/SC 23 Textiles/Fibres and yarns
Nairobi (Kenya) ** TC 38/SC 24 Textiles/Conditioning atmospheres and physical tests for textile fabrics
Sao Paulo (Brazil) ** TC 58/SC 2 Gas cylinders/Cylinder fittings
Madrid (Spain) ** TC 59/SC 16 Buildings and civil engineering works/Accessibility and usability of the built environment
(USA) ** TC 92 Fire safety
Santiago (Chile) ** TC 195 Building construction machinery and equipment
November 2015
9-12
(Spain) ** TC 189 Ceramic tile
(China) ** JTC 1 Information technology
4th Quarter 2015
Dayton, Ohio (USA) ** TC 159/SC 3 Ergonomics/Anthropometry and biomechanics
(China) ** TC 282 Water re-use
2nd Semester 2015
(Europe) ** TC 126/SC 2 Tobacco and tobacco products/Leaf tobacco
(USA) ** TC 184/SC 4 Automation systems and integration/Industrial data
Month unknown 2015
Brussels (Belgium) ** TC 23 Tractors and machinery for agriculture and forestry
(Brazil) ** TC 23/SC 17 Tractors and machinery for agriculture and forestry/Manually portable forest machinery
(USA) ** TC 27 Solid mineral fuels
(Finland) ** TC 44 Welding and allied processes
(France) ** TC 45 Rubber and rubber products
Berlin (Germany) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids
(Japan) ** TC 142 Cleaning equipment for air and other gases
(China) ** TC 155 Nickel and nickel alloys
(United Kingdom) ** TC 164 Mechanical testing of metals
(Austria) ** TC 190 Soil quality
(China) ** TC 274 Light and lighting
January 2016
(China) ** TC 120 Leather
February 2016
(USA) ** TC 213 Dimensional and geometrical product specifications and verification
April 2016
Seoul (Korea, Republic of)
** TC 161 Control and protective devices for gas and/or oil burners and appliances
(Australia) ** TC 178 Lifts, escalators and moving walks
May 2016
(Brazil) ** TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment
(India) ** TC 85 Nuclear energy, nuclear technologies, and radiological protection
June 2016
(Germany) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training
1st Semester 2016
(China) ** TC 34/SC 16 Food products/Horizontal methods for molecular biomarker analysis
October 2016
(Korea, Republic of) ** TC 201 Surface chemical analysis
November 2016
(Norway) ** JTC 1 Information technology
Month unknown 2016
(Korea, Republic of) ** JTC 1/SC 23 Information technology/Digitally Recorded Media for Information Interchange and Storage
(Russian Federation)
** REMCO Committee on reference materials
(Denmark) ** TC 37 Terminology and other language and content resources
(Australia) ** TC 44 Welding and allied processes
(Malaysia) ** TC 45 Rubber and rubber products
Wellington (New Zealand)
** TC 46 Information and documentation
(Sweden) ** TC 102 Iron ore and direct reduced iron
(China) ** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies
June 2017
(Australia) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training
June 2018
(Korea, Dem. P. Rep. of)
** JTC 1/SC 36 Information technology/Information technology for learning, education and training