Post on 12-Apr-2015
transcript
QoS CONFIGURATION OF MOTOROLA RNC
_____________
Contents 1 Transmission Resource Management (TRM) Configuration Guidelines ....................................... 2
2 Background to Transmission Resource Management ..................................................................... 2
3 TRM Configuration Guidelines ...................................................................................................... 2
4 TRM Configuration Description ..................................................................................................... 2
5 Procedure to Change DSCP ............................................................................................................ 3
6 Motorola Current Configuration ..................................................................................................... 3
7 Command Reference ....................................................................................................................... 5
1 Transmission Resource Management (TRM) Configuration
Guidelines
The Transmission Resource Management (TRM) of the RNC manages the
transmission resources of the interfaces, thus improving efficiency of resource
utilization and guaranteeing the Quality of Service (QoS). The RNC determines which
type of bearer should be used for current services, depending on certain conditions.
These conditions are the service type, the preset mapping between service types and
transmission resources, and the utilization of the transmission resources.
2 Background to Transmission Resource Management
Different types of service have different QoS requirements. For example, voice
services require high QoS but PS background services do not. Therefore, mapping
services with different QoS requirements onto different transmission resources helps
achieve high efficiency of resource utilization.
3 TRM Configuration Guidelines
Before the transport bearers are set up for radio links on the interfaces, the
RNC applies for transmission resources, makes admission decisions based on
transmission resources, and allocates transmission resources. Admission to
transmission resources plays a role of admission decision. If the admission is
successful, the RNC allocates transmission resources according to the TRM mapping
tables. For ATM transport, the RNC applies for Connection IDs (CIDs) and AAL2
path bandwidth resources. For IP transport, the RNC applies for UDP ports and IP
path bandwidth resources.
4 TRM Configuration Description
You can run the ADD TRMMAP command to configure the mapping between
service types and transmission resources. A TRM mapping table is not interface-
specific. One TRM mapping table can be used by multiple interfaces. For example: If
the TRM mapping table whose index is 1 and Transport Type is ATM meets the
requirements of Iub, Iur, and Iu-CS interfaces for transmission resources, the table can
be used by the Iub, Iur, and Iu-CS interfaces at the same time. For the Iu-PS interface,
only the mapping between the IP path and the Per Hop Behavior (PHB) is required.
* Note: The primary and secondary paths for a type of service must be
different.
5 Procedure to Change DSCP
- To change DSCP of a signaling message, use the following command:
MOD SCTPLNK to modify the setting for an SCTP link
After changing the DSCP value, you can check by tracing SCTP link
- To change the DSCP of a IPPATH, use the following command:
MOD TRMMAP to modify transmission resource mapping.
6 Motorola Current Configuration
Interface name Services DSCP PHB DSCP Decimal
IU-B
Sigtran (SCTP) EF 46
Common Channel primary path EF 46
Common Channel secondary path LQEF 46
IMS SRB primary path EF 46
IMS SRB secondary path LQEF 46
SRB primary path EF 46
SRB secondary path LQEF 46
AMR voice primary path EF 46
AMR voice secondary path LQEF 46
R99 CS Conversational primary path AF43 38
R99 CS Conversational secondary path LQAF43 38
R99 CS streaming primary path AF43 38
R99 CS streaming secondary path LQAF43 38
R99 PS Conversational primary path AF43 38
R99 PS Conversational secondary path LQAF43 38
R99 PS streaming primary path AF43 38
R99 PS streaming secondary path LQAF43 38
R99 PS high PRI interactive primary path AF33 30
R99 PS high PRI interactive secondary path LQAF33 30
R99 PS middle PRI interactive primary path AF33 30
R99 PS middle PRI interactive secondary path LQAF33 30
R99 PS low PRI interactive primary path AF33 30
R99 PS low PRI interactive secondary path LQAF33 30
R99 PS background primary path AF13 14
R99 PS background secondary path LQAF13 14
HSDPA signal primary path EF 46
HSDPA signal secondary path LQEF 46
HSDPA IMS signal primary path EF 46
HSDPA IMS signal secondary path LQEF 46
HSDPA voice primary path AF33 30
HSDPA voice secondary path LQAF33 30
HSDPA conversational primary path AF33 30
HSDPA conversational secondary path LQAF33 30
HSDPA streaming primary path AF33 30
HSDPA streaming secondary path LQAF33 30
HSDPA high PRI interactive primary path LQAF23 22
HSDPA high PRI interactive secondary path AF23 22
HSDPA middle PRI interactive primary path LQAF23 22
HSDPA middle PRI interactive secondary
path AF23 22
HSDPA low PRI interactive primary path LQAF23 22
HSDPA low PRI interactive secondary path AF23 22
HSDPA background primary path LQAF13 14
HSDPA background secondary path AF13 14
HSUPA signal primary path EF 46
HSUPA signal secondary path LQEF 46
HSUPA IMS signal primary path EF 46
HSUPA IMS signal secondary path LQEF 46
HSUPA voice primary path AF33 30
HSUPA voice secondary path LQAF33 30
HSUPA conversational primary path AF33 30
HSUPA conversational secondary path LQAF33 30
HSUPA streaming primary path AF33 30
HSUPA streaming secondary path LQAF33 30
HSUPA high PRI interactive primary path LQAF23 22
HSUPA high PRI interactive secondary path AF23 22
HSUPA middle PRI interactive primary path LQAF23 22
HSUPA middle PRI interactive secondary
path AF23 22
HSUPA low PRI interactive primary path LQAF23 22
HSUPA low PRI interactive secondary path AF23 22
HSUPA background primary path LQAF13 14
HSUPA background secondary path AF13 14
O&M 0
IU-CS
Sigtran (SCTP) CS5 40
AMR voice primary path EF 46
R99 CS Conversational primary path AF43 38
R99 CS streaming primary path AF43 38
IU-PS
Sigtran (SCTP) CS5 40
IMS SRB primary path EF 46
R99 PS Conversational primary path AF43 38
R99 PS Streaming primary path AF43 38
R99 PS high PRI interactive primary path AF33 30
R99 PS middle PRI interactive primary path AF33 30
R99 PS low PRI interactive primary path AF33 30
R99 PS background primary path AF13 14
7 Command Reference
Add SCTP Signalling Link(ADD SCTPLNK)
Function
Note
Parameter
Example
Function
Use this command to add an SCTP link.
The SCTP link is used to bear signalling.
Note
1.VLAN function does not be supported when the bearing port type of the SCTP link
is out of FE, GE and Trunk, thus no meaning to configure the VLAN ID.
2.The subrack of first local IP address, the subrack of second local IP address, and the
subrack of control SPU subsystem cannot be 3 different subracks.
3.According to RFC4960, ALDER is not suitable for checksum in SCTP, CRC32 is
recommended.
Parameter
ID Name Description
SRN Subrack No.
Description:Number of the subrack where
the SCTP link is terminated.
GUI value range:0~5
Actual value range:0~5
Unit:None
Default value:-
Recommended Value:None
SN Slot No.
Description:Number of the slot where the
SCTP link is terminated.
GUI value range:0,2,4,8,10
Actual value range:0, 2, 4, 8, 10
Unit:None
Default value:-
Recommended Value:None
SCTPLNKN SCTP link
No.
Description:Number of the SCTP link.
GUI value range:0~599
Actual value range:0~599
Unit:None
Default value:-
Recommended Value:None
MODE Signalling
link mode
Description:Working mode of the SCTP
link.
GUI value range:SERVER, CLIENT
Actual value range:SERVER, CLIENT
Unit:None
Default value:-
Recommended Value:None
APP Application
type
Description:Upper-layer application type of
the SCTP link.At Iu-b Interface the Upper-
Layer application type is NBAP,at Iu-r, Iu-
PS and Iu-CS Interface the Upper-Layer
application type is M3UA.
GUI value range:NBAP, M3UA
Actual value range:NBAP, M3UA
Unit:None
Default value:-
Recommended Value:None
DSCP DSCP
Description:DSCP is a field in an IP packet
that enables different levels of services to
be assigned to network traffic .This is
achieved by making each packet on the
network with a DSCP code and
appropriating to it the corresponding level
of services. In the same network
environment, the greater the DSCP value
is, the higher priority of the traffic has.
GUI value range:0~63
Actual value range:0~63
Unit:None
Default value:62
Recommended Value:62
LOCPN Local SCTP
port No.
Description:Local port of the SCTP link.
GUI value range:1024~65535
Actual value range:1024~65535
Unit:None
Default value:-
Recommended Value:None
LOCIP1 First local IP
address
Description:First local IP address. 0
indicates an invalid value.
GUI value range:-
Actual value
range:0.0.0.0~255.255.255.255
Unit:None
Default value:-
Recommended Value:None
LOCIP2 Second local
IP address
Description:Second local IP address. 0
indicates an invalid value.
GUI value range:-
Actual value
range:0.0.0.0~255.255.255.255
Unit:None
Default value:-
Recommended Value:None
PEERIP1
First
destination
IP address
Description:First destination IP address. 0
indicates an invalid value.
GUI value range:-
Actual value
range:0.0.0.0~255.255.255.255
Unit:None
Default value:-
Recommended Value:None
PEERIP2
Second
destination
IP address
Description:Second destination IP address.
0 indicates an invalid value.
GUI value range:-
Actual value
range:0.0.0.0~255.255.255.255
Unit:None
Default value:-
Recommended Value:None
PEERPN
Destination
SCTP port
No.
Description:Destination port of the SCTP
link.
GUI value range:1024~65535
Actual value range:1024~65535
Unit:None
Default value:-
Recommended Value:None
LOGPORTFLAG Logic Port
Flag
Description:This field indicate whether the
SCTP link is bound with logic port.
GUI value range:NO, YES
Actual value range:NO, YES
Unit:None
Default value:-
Recommended Value:None
LOGPORTSN Logic Port
Slot No.
Description:Slot No. of the logic port of the
SCTP link.
GUI value range:14~27
Actual value range:14~27
Unit:None
Default value:-
Recommended Value:None
LOGPORTNO Logic Port
No.
Description:No. of the logic port of the
SCTP Link.
GUI value range:0~119
Actual value range:0~119
Unit:None
Default value:-
Recommended Value:None
RTOMIN RTO min
value
Description:When [RTO max value] is a
constant, the larger this parameter is set,
the longer the time spent in checking if the
link works well.
GUI value range:1000~60000
Actual value range:1000~60000
Unit:ms
Default value:1000
Recommended Value:1000
RTOMAX RTO max
value
Description:When [RTO max value] is a
constant, the larger this parameter is set,
the longer the time spent in checking if the
link works well.
GUI value range:1000~60000
Actual value range:1000~60000
Unit:ms
Default value:3000
Recommended Value:3000
RTOINIT RTO initial
value
Description:When [RTO max value] and
[RTO max value] are constants, the larger
this parameter is set, the longer the time
spent in checking if the link works well.
GUI value range:1000~60000
Actual value range:1000~60000
Unit:ms
Default value:1000
Recommended Value:1000
RTOALPHA RTO alpha
value
Description:It is used to calculate the
round-trip time of the protocol stack and
the RTO value. The [RTO alpha value]
must be less than the [RTO beta value].
When [RTO beta value] is a constant, the
larger this parameter is set, the less
sensitive it becomes to the link delay.
GUI value range:0~100
Actual value range:0~100
Unit:per cent
Default value:12
Recommended Value:12
RTOBETA RTO beta
value
Description:It is used to calculate the
round-trip time of the protocol stack and
the RTO value. The [RTO beta value] must
be greater than the [RTO alpha value].
When [RTO alpha value] is a constant, the
larger this parameter is set, the more
sensitive it becomes to the link delay.
GUI value range:0~100
Actual value range:0~100
Unit:per cent
Default value:25
Recommended Value:25
HBINTER Heartbeat
interval
Description:It can be used to calculate the
heartbeat interval of the idle SCTP server.
GUI value range:1000~600000
Actual value range:1000~600000
Unit:ms
Default value:5000
Recommended Value:5000
MAXASSOCRETR
Association
max
retransfer
Description:If the number of the
association retransmissions exceeds the
value, the association is going to be
deleted. And the maximum number of the
association retransmissions must be greater
than the maximum number of the path
retransmissions.
GUI value range:0~254
Actual value range:0~254
Unit:None
Default value:10
Recommended Value:When the application
type is NBAP, the recommended value is
10; when the application type is M3UA, the
recommended value is 4.
MAXPATHRETR Path max
retransfer
Description:If the number of the path
retransmissions exceeds the value, the link
is going to be deactivated automatically.
And the maximum number of the path
retransmissions must be less than the
maximum number of the association
retransmissions.
GUI value range:0~254
Actual value range:0~254
Unit:None
Default value:5
Recommended Value:When the application
type is NBAP, the recommended value is 5;
when the application type is M3UA, the
recommended value is 2.
CHKSUMTX
Calculate
checksum
when send
message
Description:Whether to calculate the
checksum during message sending.
GUI value range:NO, YES
Actual value range:NO, YES
Unit:None
Default value:NO
Recommended Value:NO
CHKSUMRX
Calculate
checksum
when
receive
message
Description:Whether to calculate the
checksum during message receiving.
GUI value range:NO, YES
Actual value range:NO, YES
Unit:None
Default value:NO
Recommended Value:NO
CHKSUMTYPE Checksum
arithmetic
Description:According to RFC4960,
ALDER32 is not suitable for checksum in
SCTP, CRC32 is recommended.
GUI value range:ALDER32, CRC32
Actual value range:ALDER32, CRC32
Unit:None
Default value:CRC32
Recommended Value:CRC32
MTU MTU value
Description:Max Transport Unit.
GUI value range:500~1500
Actual value range:500~1500
Unit:None
Default value:1500
Recommended Value:1500
VLANFlAG VLANID
Flag
Description:VLAN ID flag.
GUI value range:DISABLE, ENABLE
Actual value range:DISABLE, ENABLE
Unit:None
Default value:DISABLE
Recommended Value:DISABLE
VLANID VLANID
Description:VLAN ID.
GUI value range:2~4094
Actual value range:2~4094
Unit:None
Default value:-
Recommended Value:None
CROSSIPFLAG Cross IP Description:This field indicate whether the
address
available
flag
cross IP address is available.
GUI value range:UNAVAILABLE,
AVAILABLE
Actual value range:UNAVAILABLE,
AVAILABLE
Unit:None
Default value:UNAVAILABLE
Recommended Value:UNAVAILABLE
SWITCHBACKFLAG
Switch
primary IP
address flag
Description:This field indicate whether
switch back if the primary IP address is
available.
GUI value range:NO, YES
Actual value range:NO, YES
Unit:None
Default value:YES
Recommended Value:YES
SWITCHBACKHBNUM Switch back
HB number
Description:This field indicates the
association will switch back to primary IP
address after receiving appointed number
of HBACK.
GUI value range:1~254
Actual value range:1~254
Unit:None
Default value:10
Recommended Value:10
Add Transport Resource Mapping(ADD TRMMAP)
Function
Note
Parameter
Example
Function
Use this command to add the transport resource mapping.
Note
1)Please be sure that the specified type of path resource exists and is available, if not,
the traffic mapped to this type of path can't be established.
2)The Primary path and secondary path of the same traffic cannot be the same.
3)There are 9 TRMMAP(index is 0 to 8) will be added when system is initialized.
Operator can not add them.
Parameter
ID Name Description
TMI TRMMAP ID
Description:TRMMAP ID.
GUI value range:9~163
Actual value range:9~163
Unit:None
Default value:-
Recommended Value:None
REMARK Remark
Description:Remark of the TRMMAP.
GUI value range:-
Actual value range:1~31 characters
Unit:None
Default value:-
Recommended Value:None
ITFT Interface
Type
Description:Interface type.
GUI value range:IUB, IUR, IUCS, IUPS
Actual value range:IUB,IUR,IUCS,IUPS
Unit:None
Default value:-
Recommended Value:None
TRANST Transport
Type
Description:Transport type.
GUI value range:ATM, IP, ATM_IP,
HYBRID_IP
Actual value
range:ATM,IP,ATM_IP,HYBRID_IP
Unit:None
Default value:-
Recommended Value:None
CCHPRIPATH
Common
channel
primary path
Description:Common channel primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is EF.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is EF.
CCHSECPATH
Common
channel
secondary
path
Description:Common channel secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is EF; transimssion type is
Hybird IP, the parameter is LQEF.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
SIPPRIPATH IMS SRB
primary path
Description:IMS SRB primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is EF.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is EF.
SIPSECPATH
IMS SRB
secondary
path
Description:IMS SRB secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is EF; transimssion type is
Hybird IP, the parameter is LQEF.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
SRBPRIPATH SRB primary
path
Description:SRB primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is EF.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is EF.
SRBSECPATH
SRB
secondary
path
Description:SRB secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NOCONFIG; transimssion type is
dual stack, the parameter is EF; transimssion type
is Hybird IP, the parameter is LQEF.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NOCONFIG.
VOICEPRIPATH AMR voice
primary path
Description:AMR voice primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is EF.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is EF.
When the interface type is Iu-CS, transmission
type is ATM, the parameter is RT_VBR;
transimssion type is IP, the parameter is EF.
VOICESECPATH
AMR voice
secondary
path
Description:AMR voice secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is EF; transimssion type is
Hybird IP, the parameter is LQEF.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
When the interface type is Iu-CS, transmission
type is ATM or IP, the parameter is NULL.
CSCONVPRIPAT
H
R99 CS
conversationa
l primary
path
Description:R99 CS conversational primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is AF43.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is AF43.
When the interface type is Iu-CS, transmission
type is ATM, the parameter is RT_VBR;
transimssion type is IP, the parameter is AF43.
CSCONVSECPA
TH
R99 CS
conversationa
l secondary
path
Description:R99 CS conversational secondary
path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is AF43; transimssion type is
Hybird IP, the parameter is LQAF43.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
When the interface type is Iu-CS, transmission
type is ATM or IP, the parameter is NULL.
CSSTRMPRIPAT
H
R99 CS
streaming
primary path
Description:R99 CS streaming primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is AF43.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is AF43.
When the interface type is Iu-CS, transmission
type is ATM, the parameter is RT_VBR;
transimssion type is IP, the parameter is AF43.
CSSTRMSECPAT
H
R99 CS
streaming
secondary
path
Description:R99 CS streaming secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is AF43; transimssion type is
Hybird IP, the parameter is LQAF43.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
When the interface type is Iu-CS, transmission
type is ATM or IP, the parameter is NULL.
PSCONVPRIPAT
H
R99 PS
conversationa
l primary
path
Description:R99 PS conversational primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is AF43.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is AF43.
When the interface type is Iu-PS, the parameter is
AF43.
PSCONVSECPAT
H
R99 PS
conversationa
l secondary
path
Description:R99 PS conversational secondary
path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is AF43; transimssion type is
Hybird IP, the parameter is LQAF43.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
When the interface type is Iu-PS, the parameter is
NULL.
PSSTRMPRIPAT
H
R99 PS
streaming
primary path
Description:R99 PS streaming primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is AF43.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is AF43.
When the interface type is Iu-PS, the parameter is
AF43.
PSSTRMSECPAT
H
R99 PS
streaming
secondary
path
Description:R99 PS streaming secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is AF43; transimssion type is
Hybird IP, the parameter is LQAF43.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
When the interface type is Iu-PS, the parameter is
NULL.
PSINTHGHPRIP
ATH
R99 PS high
PRI
Description:R99 PS high PRI interactive primary
path.
interactive
primary path
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is AF33.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is AF33.
When the interface type is Iu-PS, the parameter is
AF33.
PSINTHGHSECP
ATH
R99 PS high
PRI
interactive
secondary
path
Description:R99 PS high PRI interactive
secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is AF33; transimssion type is
Hybird IP, the parameter is LQAF33.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
When the interface type is Iu-PS, the parameter is
NULL.
PSINTMIDPRIPA
TH
R99 PS
middle PRI
interactive
primary path
Description:R99 PS middle PRI interactive
primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is AF33.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is AF33.
When the interface type is Iu-PS, the parameter is
AF33.
PSINTMIDSECP
ATH
R99 PS
middle PRI
interactive
secondary
path
Description:R99 PS middle PRI interactive
secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is AF33; transimssion type is
Hybird IP, the parameter is LQAF33.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
When the interface type is Iu-PS, the parameter is
NULL.
PSINTLOWPRIP
ATH
R99 PS low
PRI
interactive
primary path
Description:R99 PS low PRI interactive primary
path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is AF33.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is AF33.
When the interface type is Iu-PS, the parameter is
AF33.
PSINTLOWSECP
ATH
R99 PS low
PRI
Description:R99 PS low PRI interactive
secondary path.
interactive
secondary
path
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is AF33; transimssion type is
Hybird IP, the parameter is LQAF33.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
When the interface type is Iu-PS, the parameter is
NULL.
PSBKGPRIPATH
R99 PS
background
primary path
Description:R99 PS background primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is AF13.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is AF13.
When the interface type is Iu-PS, the parameter is
AF13.
PSBKGSECPATH
R99 PS
background
secondary
path
Description:R99 PS background secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is AF13; transimssion type is
Hybird IP, the parameter is LQAF13.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
When the interface type is Iu-PS, the parameter is
NULL.
HDSRBPRIPATH
HSDPA
Signal
primary path
Description:HSDPA Signal primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is EF.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is EF.
HDSRBSECPAT
H
HSDPA
Signal
secondary
path
Description:HSDPA Signal secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is EF; transimssion type is
Hybird IP, the parameter is LQEF.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HDSIPPRIPATH
HSDPA IMS
Signal
primary path
Description:HSDPA Signal primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is EF.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is EF.
HDSIPSECPATH
HSDPA IMS
Signal
secondary
path
Description:HSDPA Signal secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is EF; transimssion type is
Hybird IP, the parameter is LQEF.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HDVOICEPRIPA
TH
HSDPA
Voice
primary path
Description:HSDPA Voice primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is AF33.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is AF43.
HDVOICESECPA
TH
HSDPA
Voice
secondary
path
Description:HSDPA Voice secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is AF43; transimssion type is
Hybird IP, the parameter is LQAF33.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HDCONVPRIPA
TH
HSDPA
conversationa
l primary
path
Description:HSDPA conversational primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is AF33.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is AF43.
HDCONVSECPA
TH
HSDPA
conversationa
l secondary
path
Description:HSDPA conversational secondary
path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is AF43; transimssion type is
Hybird IP, the parameter is LQAF33.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HDSTRMPRIPAT
H
HSDPA
streaming
primary path
Description:HSDPA streaming primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is AF33.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is AF43.
HDSTRMSECPA
TH
HSDPA
streaming
secondary
path
Description:HSDPA streaming secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is AF43; transimssion type is
Hybird IP, the parameter is LQAF33.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HDINTHGHPRIP
ATH
HSDPA high
PRI
interactive
primary path
Description:HSDPA high PRI interactive primary
path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM, the parameter is
UBR; transimssion type is dual stack or IP, the
parameter is AF23; transimssion type is dual stack
or Hybird IP, the parameter is LQAF23.
When the interface type is Iur, transmission type
is ATM, the parameter is UBR; transimssion type
is IP, the parameter is AF23.
HDINTHGHSECP
ATH
HSDPA high
PRI
interactive
secondary
path
Description:HSDPA high PRI interactive
secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is UBR; transimssion type is
Hybird IP, the parameter is AF23.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HDINTMIDPRIP
ATH
HSDPA
middle PRI
interactive
primary path
Description:HSDPA middle PRI interactive
primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM, the parameter is
UBR; transimssion type is dual stack or IP, the
parameter is AF23; transimssion type is dual stack
or Hybird IP, the parameter is LQAF23.
When the interface type is Iur, transmission type
is ATM, the parameter is UBR; transimssion type
is IP, the parameter is AF23.
HDINTMIDSECP
ATH
HSDPA
middle PRI
interactive
secondary
path
Description:HSDPA middle PRI interactive
secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is UBR; transimssion type is
Hybird IP, the parameter is AF23.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HDINTLOWPRIP
ATH
HSDPA low
PRI
interactive
primary path
Description:HSDPA low PRI interactive primary
path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM, the parameter is
UBR; transimssion type is dual stack or IP, the
parameter is AF23; transimssion type is dual stack
or Hybird IP, the parameter is LQAF23.
When the interface type is Iur, transmission type
is ATM, the parameter is UBR; transimssion type
is IP, the parameter is AF23.
HDINTLOWSEC
PATH
HSDPA low
PRI
interactive
secondary
Description:HSDPA low PRI interactive
secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
path AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is UBR; transimssion type is
Hybird IP, the parameter is AF23.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HDBKGPRIPAT
H
HSDPA
background
primary path
Description:HSDPA background primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM, the parameter is
UBR; transimssion type is dual stack or IP, the
parameter is AF13; transimssion type is dual stack
or Hybird IP, the parameter is LQAF13.
When the interface type is Iur, transmission type
is ATM, the parameter is UBR; transimssion type
is IP, the parameter is AF13.
HDBKGSECPAT
H
HSDPA
background
secondary
path
Description:HSDPA background secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is UBR; transimssion type is
Hybird IP, the parameter is AF13.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HUSRBPRIPATH
HSUPA
Signal
primary path
Description:HSUPA Signal primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is EF.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is EF.
HUSRBSECPAT
H
HSUPA
Signal
secondary
path
Description:HSUPA Signal secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is EF; transimssion type is
Hybird IP, the parameter is LQEF.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HUSIPPRIPATH
HSUPA IMS
Signal
primary path
Description:HSUPA Signal primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is EF.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is EF.
HUSIPSECPATH
HSUPA IMS
Signal
secondary
path
Description:HSUPA Signal secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is EF; transimssion type is
Hybird IP, the parameter is LQEF.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HUVOICEPRIPA
TH
HSUPA
Voice
primary path
Description:HSUPA Voice primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is EF.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is EF.
HUVOICESECPA
TH
HSUPA
Voice
secondary
path
Description:HSUPA Voice secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is EF; transimssion type is
Hybird IP, the parameter is LQEF.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HUCONVPRIPA
TH
HSUPA
conversationa
l primary
path
Description:HSUPA conversational primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is AF33.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is AF43.
HUCONVSECPA
TH
HSUPA
conversationa
l secondary
path
Description:HSUPA conversational secondary
path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is AF43; transimssion type is
Hybird IP, the parameter is LQAF33.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HUSTRMPRIPAT
H
HSUPA
streaming
primary path
Description:HSUPA streaming primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or dual stack, the
parameter is RT_VBR; transimssion type is IP or
Hybird IP, the parameter is AF33.
When the interface type is Iur, transmission type
is ATM, the parameter is RT_VBR; transimssion
type is IP, the parameter is AF43.
HUSTRMSECPA
TH
HSUPA
streaming
secondary
path
Description:HSUPA streaming secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is AF43; transimssion type is
Hybird IP, the parameter is LQAF33.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HUINTHGHPRIP
ATH
HSUPA high
PRI
interactive
Description:HSUPA high PRI interactive primary
path.
GUI value range:CBR, RT_VBR, NRT_VBR,
primary path UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM, the parameter is
UBR; transimssion type is dual stack or IP, the
parameter is AF23; transimssion type is dual stack
or Hybird IP, the parameter is LQAF23.
When the interface type is Iur, transmission type
is ATM, the parameter is UBR; transimssion type
is IP, the parameter is AF23.
HUINTHGHSECP
ATH
HSUPA high
PRI
interactive
secondary
path
Description:HSUPA high PRI interactive
secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is UBR; transimssion type is
Hybird IP, the parameter is AF23.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HUINTMIDPRIP
ATH
HSUPA
middle PRI
interactive
primary path
Description:HSUPA middle PRI interactive
primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM, the parameter is
UBR; transimssion type is dual stack or IP, the
parameter is AF23; transimssion type is dual stack
or Hybird IP, the parameter is LQAF23.
When the interface type is Iur, transmission type
is ATM, the parameter is UBR; transimssion type
is IP, the parameter is AF23.
HUINTMIDSECP
ATH
HSUPA
middle PRI
interactive
secondary
path
Description:HSUPA middle PRI interactive
secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is UBR; transimssion type is
Hybird IP, the parameter is AF23.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HUINTLOWPRIP
ATH
HSUPA low
PRI
interactive
primary path
Description:HSUPA low PRI interactive primary
path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM, the parameter is
UBR; transimssion type is dual stack or IP, the
parameter is AF23; transimssion type is dual stack
or Hybird IP, the parameter is LQAF23.
When the interface type is Iur, transmission type
is ATM, the parameter is UBR; transimssion type
is IP, the parameter is AF23.
HUINTLOWSEC
PATH
HSUPA low
PRI
interactive
secondary
path
Description:HSUPA low PRI interactive
secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is UBR; transimssion type is
Hybird IP, the parameter is AF23.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.
HUBKGPRIPAT
H
HSUPA
background
primary path
Description:HSUPA background primary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM, the parameter is
UBR; transimssion type is dual stack or IP, the
parameter is AF13; transimssion type is dual stack
or Hybird IP, the parameter is LQAF13.
When the interface type is Iur, transmission type
is ATM, the parameter is UBR; transimssion type
is IP, the parameter is AF13.
HUBKGSECPAT
H
HSUPA
background
secondary
path
Description:HSUPA background secondary path.
GUI value range:CBR, RT_VBR, NRT_VBR,
UBR, BE, AF11, AF12, AF13, AF21, AF22,
AF23, AF31, AF32, AF33, AF41, AF42, AF43,
EF, LQBE, LQAF11, LQAF12, LQAF13,
LQAF21, LQAF22, LQAF23, LQAF31,
LQAF32, LQAF33, LQAF41, LQAF42,
LQAF43, LQEF, NULL
Actual value
range:CBR,RT_VBR,NRT_VBR,UBR,BE,AF11,
AF12,AF13,AF21,AF22,AF23,AF31,AF32,AF33,
AF41,AF42,AF43,EF,LQBE,LQAF11,LQAF12,L
QAF13,LQAF21,LQAF22,LQAF23,LQAF31,LQ
AF32,LQAF33,LQAF41,LQAF42,LQAF43,LQE
F,NULL
Unit:None
Default value:-
Recommended Value:When the interface type is
Iub, transmission type is ATM or IP, the
parameter is NULL; transimssion type is dual
stack, the parameter is UBR; transimssion type is
Hybird IP, the parameter is AF13.
When the interface type is Iur, transmission type
is ATM or IP, the parameter is NULL.