Post on 07-Mar-2021
transcript
238
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
www.southco.com/R3
Mountingbracket (extended)
Slide travel16.5 (.65)
Door thickness(extended bracket)22 - 50 (.875 - 2.00)
Door thickness(standard bracket)32 - 50 (1.25 - 2.00)
Mountingbracket (standard)
13(.51)
18.2 (.72 )
116 (4.57)Front flange
128.7 (5.07)Front flange
23.4 (.92)
Multi-pointrods (not supplied)
32.5 (1.28)
Gasket
18.3 (.72)
15.1 (.59)Maximum rod movement
Back View
Ø 4 x 4 (.16)Rod B
Rod A
51 (2.0)
13 (.51)Ø 4 (.16)
12 (.47)
7.1 (.28)
12 (.47) 7.1 (.28)
Rod A
Rod B
Part Number
Latch Finish Locking (CH751)(2 Flat Keys Included)
Locking (Reversible Key)R001 (2 Flat Keys
Included)Locking (No Core)* Non-Locking
Chrome, polished R3-20-350-10 R3-20-320-10 R3-20-390-10 R3-20-300-10
Black powder coated R3-20-350-50 R3-20-320-50 R3-20-390-50 R3-20-300-50
White powder coated R3-20-350-70 R3-20-320-70 R3-20-390-70 R3-20-300-70
R3 Push-to-Close LatchPull-to-open · Paddle handle · Baggage door latch
Multi-Point Capable
Actuating rods are not supplied Recommended rod configuration shown below
Latch shown in actuated (unlatched) position (slide retracted)
Plastic Clips: Part number: R4-0-43922 for 4mm rods are available as an option
• Environmentally sealed• Emergency release• For use with R4 rotary latches
Material and Finish Latch assembly: Zinc alloy, black or white powder coated or chrome plated
Slide bolt: Zinc alloy, zinc plated
Striker mounting plates and brackets: Steel, zinc plated
Performance DetailsMaximum working load: 560 N (125 lbf)
Installation NotesMaximum tightening torque on mounting screws: 2 Nm (14 inlbf)
Notes*For lock core selection and a complete overview of the SOUTHCO® Key-Choice System see page 158
Part NumberOrder latch, bracket and mounting screws separately.
For latch see table
For bracket and mounting screws see page 239
For applicable rotary latches see page 255.
Other options available. For complete details on variety, part numbers, installation and specification, go to
239
Dimensions in millimeters (inch) unless otherwise stated www.southco.com/R3
85 (3.35)
100 (3.94)
150 (5.9)Door back
Channel formulti-point rods
22 - 50(.87 - 2.00)Door front
150 (5.9)
70 (2.76)Min.
25 (1.0) Slide
channel
12.5 (.5)
34(1.34)
30 (1.18)
85 (3.35)
100(3.94)
118 (4.65)Door back
Channel formulti-point rods
32 - 50 (1.26 - 2.00)
25 (1.0)
Door front
118 (4.65)BackPanel
9 (.35) 16.5 (.65)
1.5 - 9.5 (.06 - .375)
4 xØ 4.4 (.17)
71(2.8)
114.4 (4.50)68.5 (2.7)
97.4 (3.83)
105 (4.13)
29 (1.14)
23 (.90)
10 (.39) 127
(2.50)
1.4 (.06)10.9 (.43)
Optional slot (emergency egress handle)
4XØ 4.4 (.17) Typ
71(2.8)
114.3 (4.50)68.5
(2.70)89.3
(3.52)
159.2 (6.27)
29 (1.14)
22.9 (.90)10 (.39)
184.2 (7.25)1.4 (.06)
17.5 (.69)
76.2(3.00)
19(.75)
54.5(2.14)
Optional slot(emergency egress handle)
4 x Ø 6(.236)
71 (2.8)
35.5 (1.4)
68.5(2.70)
110.4 (4.37)
102 (4.02)
29(1.14)
10(.39)
16 (.63) 20.5(.81)
2(.08)
39(1.52)
25 (1.0) Slide
channel
12.5 (.5)
30 (1.18)
30 (1.18)
85 (3.35)
100 (3.94)
100 (3.94) Ref
Door back Channel formulti-point rods34 (1.34)
Frame
Door front
6 (.25)
32 (1.26) to50 (2.00)
Bracket Part Number
No. 8 Self Tapping Screw (Part Number By Length)
R3-23-250-01 R3-23-250-02 R3-23-250-03 R3-23-250-04 R3-23-250-05
16 (.625) Long 19 (.750) Long 25.4 (1.00) Long 32 (1.250) Long 38 (1.500) Long
Standard Bracket R3-23-160-11-01 32 (1.250) 32 (1.250) - 38 (1.500) 38 (1.500) - 44 (1.750) 44 (1.750) - 50 (2.00) –
Extended Bracket R3-23-162-11-01 22 (.875) - 25 (1.00) 25 (1.000) - 32 (1.250) 32 (1.250) - 38 (1.500) 38 (1.500) - 44 (1.750) 44 (1.750) - 50 (2.00)
U-Bracket R3-23-161-11 1.5 (.0620 - 4.8 (.187) 4.8 (.187) - 9.5 (.375) – – –
Door thickness
Extended Bracket
U-Bracket (slot for emergency egress handle included)
Standard Bracket
NotesU-bracket is intended for sheet metal door applications
Part NumberOrder latch, bracket and mounting screws separately.
For latch see page 238
For bracket and mounting screws see table
AccessoriesFlat key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01
Overmolded key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01-05
Overmolded key, keyed alike R001 (2 keys per ring) Part number: PK-10-01-05-KR001
Emergency egress handle (optional): Part number: R3-21-110
240
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
Finish Latch Part Number
Chrome, polished R3-10-311-10
Black powder coated R3-10-311-50
White Powder coated R3-10-311-70
www.southco.com/R3
CL
DoorFrame
92±1(3.62±.04)
68 (2.68 )
32.5±1(1.28±.04)
58*±1(2.28±.04)
8 (.31 )+0-2
+.00-.08
42.1(1.66)
Striker holes84.2 (3.31)
Frame mortise14 (.55) deep
Door mortise58 (2.3) thru
32 - 38 (1.25 -1.50)
22 (.87)
50(2.0)
+2-0
+.08-0
10 (.39)
37* (1.46)
18*(.7)
10(.39)
Door clearance 6 (.24)
Hingeside
22(.87)
22(.87)
A
B
R 4 (.16)Maximum
84.2 (3.31)
2 x Clearance holes for screws (not supplied) 45 (1.77)
2 x Clearance holes for 8-32 flat-head screws (supplied)
Mounting Plate Striker Plate
32 - 38(1.25 - 1.50)
110(4.33)
94 (3.7)
Fronthousing
Backhousing
121(4.76)
45 (1.77)
2 x8-32
Mounting plate holes
Deadbolt actuator
Gasket
114(4.49)
65 (2.55)
90(3.54)
16(.63)
14.5(.57)
Part NumberSee table
R3 Push-to-Close LatchPull-to-open · Paddle handle · Entry door latch
*For left hand mounting mirror the dimensions marked with * by moving them to the other side of the centerline.
• Environmentally sealed• Dual sided access and
locking
Material and FinishLatch assembly: Zinc alloy, black powder coated or white or chrome plated
Slide bolt: Zinc alloy, zinc plated
Striker mounting plates and brackets: Steel, zinc plated
Performance DetailsMaximum working load: 560 N (125 lbf)
Operating temperature range: -18ºC (0ºF) to 60ºC (140ºF)
Installation NotesMaximum tightening torque on mounting screws: 2 Nm (14 inlbf)
AccessoriesOvermolded key, keyed alike CF305 (2 keys per ring) Part number: PK-10-01-09-CF305
Replacement screws Part number: R3-13-310
NotesMounting plate, striker plate and all mounting screws except striker plate screws are provided with each lock set.
Part Number
Mounting plate R3-13-190
Striker plate R3-13-180Other options available. For complete details on variety, part numbers, installation and specification, go to
263C
Dimensions in millimeters (inch) unless otherwise stated
• Single or multi-point actuation capability• Compatible with a wide range of rotary latches• Environmentally sealed
Material and FinishLatch assembly: Zinc alloy, black or white powder coated or chrome plated. Mounting bracket: Steel, zinc plated
Installation NotesMaximum tightening torque on mounting screws: 2 N•m (14 in•lbf)
NotesFor lock core selection and a complete overview of the SOUTHCO®
Key-Choice System see page 158
Can be configured with 1 or 2 cables. Recommended cable type 7. Cable mounting brackets sold separately. (See page 275).
Part NumberOrder latch, bracket and mounting screws separately
For latch see table
For mounting bracket, order part number R3-23-161-11
See table for mounting screws
www.southco.com/AC
R3-22 Multi Point ActuatorPull-to-open Paddle
Other options available. For complete details on variety, part numbers, installation and specification, go to
Screws for Mounting Bracket Part Number R3-23-161-11
Front Door Thickness No. 8 Self Tapping Screw (order 4 per latch)
1.5 (.062) - 4.8 (.187) R3-23-250-01
4.8 (.187) - 9.5 (.375) R3-23-250-02
Panel Preparation
Mounting bracket
(sold separately)
100 (3.94)
118 (4.65)
100 (3.94)
85(3.35)
9(.35)
118(4.65)
2X 16.5 (.65)
1.5-9.5(.0625-.375)
118 (4.65)
32-50(1.26-2.00)
Backside panel of door
Frontside panel of door
Backside panel
Backside panel
116(4.57)
18.2(.72)
128.7 (5.07)
22-50 (.875-2.00)
32-50 (1.25-2.00)
Frontflange
Front flange
Multi-pointcables (not supplied)
68.5(2.7)
110(4.3)
71(2.8)
102(4)
Mounting bracket
R3-23-161-11
(sold separately)
Cable retaining
clips included
Mounting screws (4x) see table below
(sold separately)
R3 - 22 - 3 L 0 - F 0
F Finish1 Polished chrome 5 Black powder coated 7 White powder coated
L Locking Options0 Non-locking 1 Reversible Key (No keys - R001) 2 Reversible Key (2 keys included - R001)4 Standard Key (No keys - CH751)5 Standard Key (2 Keys included - CH751)9 No lock plug installed (see notes for more information)