Post on 26-Jan-2021
transcript
Range of non-destructive
testing and technical
diagnostics services provided by
TWN Technology
TWN Technology Servicesв странах СНГ
TWN Technology Group provides a wide range of services in
the field of non-destructive testing and technical diagnostics,
testing of materials and welding technologies.
We have people who specialize in innovative control methods:Digital Radiography, TOFD and PAUT.
Our specialists are well-qualified professional with lots of experience, proven track record and world-class
certifications such as API, SNT-TC-1A, NACE, AWS, ISO and others.
RT UT
How long
should I wait?
Be patient, another 4
hours
Ø 610 mm;
Т=61,7 mm
Time=73 min
4 exposures
How long to
wait for control
results?
15 minutes
and I say the
result
No flaws
Advanced control methods
результатов на объектах в странах СНГ
Our specialists have experience in
working at inspection of different
objects
Ultrasonic testing services
результатов на объектах в странах СНГ
Small diameter pipe inspection
Medium diameter pipe inspection
Ultrasonic testing services
результатов на объектах в странах СНГ
Mechanized ultrasonic
testing of welds
of long distance
pipelines
Ultrasonic testing services
результатов на объектах в странах СНГ
TOFD, PAUT and creeping wave
inspection of pressure vessels,
tanks (reactors, adsorbers,
columns, etc.)
Ultrasonic testing services
результатов на объектах в странах СНГ
✓ Highest signal-to-noise ratio ✓ Instant X-ray image acquisition on the screen✓ Reduced exposure time✓ Replacement of expensive X-ray film✓ Speed of control is 4-10 times faster than on film
Advantages of digital radiography over traditional RT
Where isthe film?
It does not exist, the
detector is used, I.e. no
chemicals (developer,
fixer) and drying are
required
What about the
control results?
In a few
minutes it will
be ready
What’s the speed of control?
Speed of control is 4-
10 times faster than
on film
Digital Radiography
результатов на объектах в странах СНГ
Our specialists have experience in working at
inspection of different objects
Digital Radiography services
результатов на объектах в странах СНГ
Small diameterpipe inspection
Medium diameterpipe inspection Rail inspection
Pipe inspectionthrough insulation
Digital Radiography services
результатов на объектах в странах СНГ
Inspectionof plastics
Flat product inspection
Corrosion inspection
Pipe elbowinspection
Digital Radiography services
Automated digital x-ray inspection of welds
of long distance pipelines
Digital Radiography services
Manufacture of NDT blocks
TWN Technology manufacture NDTblocks for ultrasonic testing:
Customized calibration blocks: production of calibration
blocks according to customer requirements and drawings
PAUT and TOFD standard blocks: production of calibration
blocks according to ASME, API, EN ISO 9712, etc.
Production of blocks with real flaws
результатов на объектах в странах СНГ
TWN Technology provides training for specialists in
wide field of range of non-destructive testing, in
particular, training to use traditional NDT and local
technological processes.
Specialized training in NDT and TD
Ultrasonic testing(PAUT and TOFD)
Digital radiography (DR)
Training of NDT and TD specialists
Training of specialists on the basis of the customer on working with equipment at real objects
Training Mechanized
Ultrasonic testingTraining with equipment
on the phased array
Training with equipment
used TOFD-method
Training with the digital
radiography systems
Training of NDT and TD specialists
результатов на объектах в странах СНГ
TWN Technology has experience in developing control procedures and techniques for different objects
(pipelines, tanks, columns, reactors, etc.)
Development of procedures and techniques
Russia Federation Office+7 499 380 62 92+7 499 455 06 29
Belarus Office+375 17 358 07 04+375 29 320 22 54
Kazakhstan Office +7 717 269 58 22
The Baltic States Office + 372 57 045 59 50
service@twn-technology.com
Website
www.twn-technology.com
Thanks!