Post on 17-Aug-2019
transcript
EuropeEmployees: 1,700Manufacturing Sites: 14R&D/Tech Centers: 8
North AmericaEmployees: 7,000Manufacturing Sites: 34R&D/Tech Centers: 8
Latin America and OtherEmployees: 300Manufacturing Sites: 2R&D/Tech Centers: 5
WorldwideEmployees: ~10,500Manufacturing Sites: 55R&D/Tech Centers: 29
Asia PacificEmployees: 1,500Manufacturing Sites: 5R&D/Tech Centers: 8
Ashland Inc. (NYSE: ASH) is a global leader in providing specialty chemical solutions to customers in a wide range of consumer and industrial markets. We use good chemistry to make great things happen for customers in more than 100 countries.
Our innovative products and services add value to a variety of things that touch people’s lives every day. Our chemistries help whiten your teeth, protect you from the sun and make your medicine work more effectively. They help create more sustainable building products and energy sources. They help your cars, trucks and other vehicles run better. Our ingredients can be found across a broad spectrum of applications, including adhesives, architectural coatings, automotive, construction, energy, food and beverage, personal care and pharmaceutical.
At Ashland, we are more than 10,000 people – from renowned scientists and research chemists to talented engineers and plant operators – working together to deliver value to customers around the world.
As a global company, however, Ashland has broader social responsibilities that go beyond our customers and into the regions, countries and cities where we live and work. From giving back to our local communities through volunteer service and charitable contributions, to providing comprehensive safety, compliance and employee development programs, we are dedicated to responsibly managing our global environmental, health, safety and security obligations and positively contributing to our communities.
For more information, visit us at ashland.com.
Ashland at a glance
2 Performance Specialties Reference Guide
Contents
Product overviewSolvents, intermediates and surfactants ............................................................ 6
Vinyl monomers ............................................................................................................. 7
Performance polymers .......................................................................................... 8-9
Specialty chemicals ...................................................................................................... 9
Surfactants, solvents and intermediatesSurfadone™ solvent/wetting agent .................................................................. 10
Easy-Wet™ 20 wetting agent ................................................................................. 11
Dextrol™ and Strodex™ phosphate esters ............................................... 12-13
Emulsifiers, dispersants and lubricants ............................................................ 14
Ceraphyl™, Cerasynt™ and Emulsynt™ emulsifiers ..................................... 14
Vinyl monomersV-Pyrol™ vinylpyrrolidone ...................................................................................... 15
V-Cap™ vinylcaprolactam ....................................................................................... 15
Rapi-cure™ DVE-3 ether ............................................................................................ 16
Rapi-cure HBVE ether ................................................................................................ 16
Performance polymersPVP K-series polymers ........................................................................................ 17-18
ViviPrint™ 540 polymers ............................................................................................19
PVPP polymers ............................................................................................................. 19
Xxtradura™ 5636 rheology modifier .................................................................. 20
Disintex™ disintegrants ............................................................................................. 20
Polyplasdone™ and Polyclar™ PVPP ................................................................... 21
Vinylpyrrolidone copolymers ............................................................................... 21
Ganex™/Antaron™ polymers .................................................................................. 22
PVP/VA polymers ........................................................................................................ 23
Polectron™ 430/Antara™ polymer ...................................................................... 24
Vinylpyrrolidone/alkylaminomethacrylate and alkylaminomethacrylamide copolymers ........................................................ 24
Sorez™ HS-205 and Gafquat™ copolymers .................................................... 25
Gafquat™ HS-100 polymer ..................................................................................... 25
Styleze™ CC-10 copolymer ...................................................................................... 26
Setleze™ 3000 copolymer ...................................................................................... 26
Styleze W polymers ................................................................................................... 26
Styleze 2000 and Acrylidone™ LM polymers ............................................... 27
UltraThix™ P-100 crosspolymer ............................................................................ 27
Vinylcaprolactam polymers................................................................................... 28
Gaffix™/Copolymer VC-713 polymer .................................................................. 28
Aquaflex™ SF-40 polymer ...................................................................................... 29
Aquastyle™ 300 tetrapolymer .............................................................................. 29
Chromabond™ polymer ........................................................................................... 30
Sorez 100 copolymer ................................................................................................ 30
Aquaflow™ polymers ................................................................................................ 31
Gantrez™ AN copolymers ....................................................................................... 32
Gantrez S copolymers .............................................................................................. 33
Gantrez MS copolymers .......................................................................................... 33
Gantrez ES copolymers ............................................................................................ 33
EasySperse™ polymeric dispersant range ...................................................... 33
Stabileze™ QM polymer........................................................................................... 34
I-Rez™ 160 copolymer ...............................................................................................34
Aquaflex™ FX-64 copolymer................................................................................. 35
Aquaflex XL-30 copolymer ..................................................................................... 35
Jaypol™ acrylates ........................................................................................................ 36
Ashland™ 940 and 980 carbomers ..................................................................... 37
RapiThix™ A-100 polymer ....................................................................................... 38
RheoThix™ 601 thickening agent ........................................................................ 38
Rapifloc™ A1-MG polymers .................................................................................... 39
Bondwell™, Blanose™, Aqualon™ CMC............................................................. 40
Ambergum™ water-soluble polymers ............................................................. 41
Natrosol™, Natrosol B and Natrosol Plus hydroxyethylcellulose (HEC) ..42-44
Admiral™, Liberty™ and Natrosol FPS ................................................................ 45
Culminal™, Benecel™ methylcellulose ....................................................... 46-49
Culminal, Benecel methylcellulose derivatives ............................................ 48
Culminal, Benecel methylhydroxypropylcellulose (MHPC) ................... 48
Culminal, Combizell™ methylhydroxyethylcellulose (MHEC) ............... 49
Klucel™ hydroxypropylcellulose (HPC)............................................................. 50
Aqualon™ ethylcellulose (EC) ................................................................................ 51
Galactasol™ derivatized guar ................................................................................ 52
Specialty chemicalsEscalol™ UV filters ....................................................................................................... 52
Micropowder™ Iron ................................................................................................... 53
Iron Pentacarbonyl ..................................................................................................... 53
Drewplus™/Advantage™ defoamers .......................................................... 55-56
pHLEX™ neutralizing additive .............................................................................. 57
Charts ........................................................................................................................58-71
This brochure is organized into four categories representing major chemical families of Ashland products.
Surfactants, Solvents and Intermediatespages 10–14
Vinyl Monomerspages 15–16
Performance Polymerspages 17–52
Specialty Chemicalspages 52–57
Performance Specialties Reference Guide 3
Chemical Name Ashland Brand
Acrylate polymer sodium salt RheoThix™ 601
Acrylic acid polymers Jaypol™, Carbomer, Rapifloc™
Acrylic acid / VP crosspolymer UltraThix™
Carbonyl iron powders Micropowder™ Iron
Carboxymethylcellulose Aqualon™, Bondwell™, CMC, Blanose™
Esters and hydroxyesters Ceraphyl™, Cerasynt™
2-ethylhexyl palmitate Ceraphyl 368 M
2-hydroxyethyl stearate Cerasynt M
2-hydroxyethyl sterate and ethylenglycol Cerasynt IP
Bis (2-ethylhexyl) malate Ceraphyl 45
C12-C15 alkyl lactate Ceraphyl 41
Castor oil monomeleate Ceraphyl RMT
Decyl oleate Ceraphyl 140
Diisopropyl adipate Ceraphyl 230
Glyceryl stearate and polyxyethylene lauryl ether Cerasynt 945
Glyceryl sterate Cerasynt SD
Hexadecyl lactate Ceraphyl 28
Isocetyl stearate Ceraphyl 494
Isocetyl stearoyl stearate Ceraphyl 791
Isodecyl neopentanoate Ceraphyl SLK
Isodecyl oleate Ceraphyl 140 A
Isohexadecanol Ceraphyl ICA
Isotearyl neopentanoate Ceraphyl 375
Lauryl lactacte Ceraphyl 31
Maleated soybean oil Ceraphyl NGA
Octyldoddecyl stearoyl steate Ceraphyl 847
Octyldodecyl stearate Ceraphyl ODS
Propylene glycol monostearate Cerasynt PA
Tetradecyl lactate Ceraphyl 50
Tetradecyl tertradecanoate Ceraphyl 424
Tridecyl neopentanoate Ceraphyl 55
Ethylcellulose Aqualon™ EC
Foam Control (defoamers and anti-foam) Drewplus™/Advantage™
Guar Derivatives (nonionic, anionic, cationic) Galactosol™
Hydrophobically modified polyacetal-polyethers Aquaflow™
Hydroxyethylcellulose Natrosol™
Hydrophobically modified hydroxyethylcellulose Natrosol Plus
Hydroxypropylcellulose Klucel™
Iron pentacarbonyl Iron Pentacarbonyl
Isobutylene/maleic anhydride copolymer I-Rez™
Isobutylene/ethylmaleimide/hydroxyethylmaleimide copolymer Aquaflex™
Chemical/product trade name cross-reference
4 Performance Specialties Reference Guide
Chemical/product trade name cross-reference
Chemical Name Ashland Brand
Methylcellulose Combizell™, Culminal™, Benecel™
Methylhydroxyethylcellulose Benecel, Culminal, Combizell
Methylhydroxypropylcellulose Culminal, Benecel, Combizell
Methylvinylether / maleic anhydride copolymer Gantrez™ AN
Methylvinylether / maleic acid copolymer Gantrez S
Methylvinylether / maleic acid half esters copolymer Gantrez ES, EasySperse™
N-dodecyl-2-pyrrolidone Surfadone™ LP-300
N-octyl-2-pyrrolidone (NOP) Surfadone LP-100
Polyethylene glycol polyester copolymer Sorez™ 100
Poly (methylvinylether/maleic anhydride decadiene) crosspolymer Stabileze™ QM polymer
Polyvinylpolypyrrolidone PVP
Polyvinylpyrrolidone alkylated Ganex™/Antaron™
Polyvinylpyrrolidone / polystyrene Polectron™/Antara™
Polyvinylpolypyrrolidone (PVPP ) ViviPrint, Disintex™, PolyClar™
Pyridine, 4-ethenyl-, homopolymer, sodium chloroacetate quaternized Chromabond™
Surfactants, emulsifiers, wetting agents Easy-Wet™, Dextrol™, Strodex™, Surfadone
Ultraviolet absorbers Escalol™
1-(4-Methoxyphenyl)-3-(4-terbutylphenyl) propan-1,3-dione Escalol 517
2,2-[6-(4-methoxyphenyl)-1,3,5-triazine-2,4-diyl] bis {5-[(2-ethylhexyl)oxy]phenol} Escalol S
2-Ethylhexyl 2-cyano-3,3-diphenylacrylate Escalol 598
2-Ethylhexyl-pdimethylaminobenzoate Escalol 507
2-Ethylhexyl-p methoxycinnamate Escalol 557
2-Ethylhexyl salicylate Escalol 587
2-Hydroxy-4-methoxybenzophenone Escalol 567
5-Benzoyl-4-hydroxy-2-methoxybenzene sulfonic acid Escalol 577
Vinyl caprolactam (VCP) V-Cap™
Vinylpyrrolidone (NVP) V-Pyrol™
Vinylpyrrolidone copolymers
Vinylpyrrolidone/vinyl acetate copolymers PVP/VA polymers
Vinylpyrrolidone/dimethylaminoethylmethacrylate Sorez™, Gafquat™
Vinylpyrrolidone/dimethylaminopropylmethacrylamide copolymer Styleze™, ViviPrint, Setleze™
Vinylpyrrolidone/methacrylamidopropyl trimethylammonium chloride Gafquat
Vinylpyrrolidone/dimethylaminopropylmethacrylamide/ methacryloylaminopropyllauryl dimethyl ammonium chloride terpolymer
Styleze
Vinylpyrrolidone/acrylic acid/lauryl methacrylate terpolymer Styleze, Acrylidone™
Vinylpyrrolidone/vinylcaprolactam/dimethylaminoethylmethacrylate terpolymer Gaffix™
Vinylpyrrolidone/vinylcaprolactam copolymer Inhibex™
Vinyl caprolactam/vinylpyrrolidone/dimethylaminopropylmethacrylamide terpolymer Aquaflex™
Vinylpyrrolidone/vinyl caprolactam/dimethylaminopropylmethacrylamide and methacryloylaminopropyl lauryl dimethyl ammonium chloride tetrapolymer
Aquastyle™
Performance Specialties Reference Guide 5
• CHP™ solvent (n-cyclohexyl-2-pyrrolidone): Individual cosolvent or in combination with M-Pyrol n-methyl-2-pyrrolidone and BLO™ gamma-butyrolactone solvents to enhance performance by broadening solubility range in circuit board fabrication, cleaning formulations, dyeing bath additive and paint strippers.
The common characteristic of these chemicals is high solubility in hydrophilic media.
• Propargyl Alcohol and Butynediol, due to their high electron density of the acetylenic bond, function as metal-complexing and corrosion-inhibiting agents.
• Butenediol, having a cis double bond enters into Diels-Alder reactions, and Butanediol finds application as a plasticizer and humectant.
All four alcohols function as precursors to numerous derivatives such as esters, carbamates, polyesters and urethanes.
• THF is an inert solvent for numerous polymer and organometallic reactions and is the precursor of polytetramethyleneglycol.
• BLO™ gamma-butyrolactone is a polar solvent for ionic substrates and functions as an acid donor in aqueous media at elevated temperatures.
Emulsifiers, dispersants and lubricants
Ashland has a broad family of water-insoluble esters and hydroxyesters sold under the Ceraphyl™ and Cerasynt™ trademarks as lubricants, dispersants and emulsifiers. These chemicals typically are surface active and find use in HI&I, plastics, textile, photography, inks and coatings markets. A variety of esters is available with a range of properties, including liquids and waxy solids. In addition, amide and quaternary-ammonium salts are available.
Surfactants, solvents and intermediates
Not available in EMEA
Surfactants
The Surfadone™ alkyl pyrrolidones are hydrophobic in nature, functioning as excellent wetting agents and effective dispersing and cleaning aids.
Dextrol™ and Strodex™ phosphate ester surfactants are leading technologies within our extensive portfolio of high-quality additives. These high-performance specialty surfactants exhibit superior wetting and emulsifying properties and are unique in that their compositions can be modified to achieve specific properties. Dextrol and Strodex phosphate ester surfactants demonstrate a strong viscosity profile and broad compatibility as well as good stability to a wide range of temperatures, pH and hard water. They provide corrosion inhibition, emulsification and dispersion properties.
Solvents and intermediates
Pyrrolidones: This family of chemicals varies in properties as a function of substitution on the lactam nitrogen atom. All members are characterized by low vapor pressure, high flash point, high dipole moment, ready complex formation, surface activity as the alkyl chain lengthens, and biodegradability when the alkyl chain is linear.
• 2-Pyrol™ 2-pyrrolidone is used as a humectant, cosolvent with water, coalescent aid and plasticizer.
The lower alkyl pyrrolidones, most notably M-Pyrol™ n-methyl-2-pyrrolidone, are excellent polymer solvents, paint and photoresist strippers, paint coalescents, industrial cleaners and extraction solvents.
• M-Pyrol™ solvent (n-methyl-2-pyrrolidone): Solvent, cosolvent and diluent. Used in cleaners, coating and photoresist strippers, coalescents and rechargeable battery manufacture.
• NEP™ solvent (n-ethyl-2-pyrrolidone): Low-temperature reaction solvent for temperature-sensitive reactions and cosolvent used individually or in combination with other water-soluble solvents. Used as an alternative for n-methyl-2-pyrrolidone.
• HEP™ solvent (n-hydroxyethyl-2-pyrrolidone): Cosolvent formulated individually or in combination with M-Pyrol solvent for strippers and cleaners and as an intermediate.
6 Performance Specialties Reference Guide
Vinyl monomers
Vinyllactam ethers are offered for applications based on the utility of their olefin linkage.
• V-Pyrol™ inhibited or caustic n-vinyl-2-pyrrolidone is water-soluble and undergoes free radical homo- and copolymerizations as well as grafting reactions. V-Pyrol n-vinyl-2-pyrrolidone is a low-viscosity reactive diluent for UV radiation curing processing.
• V-Cap™ n-vinyl-2-caprolactam is only slightly soluble in water, but can function in many applications similar to V-Pyrol n-vinyl-2-pyrrolidone.
• Fully formulated UV-curable Gafgard™ coating systems impart abrasion and solvent resistance to a wide variety of surfaces.
Performance Specialties Reference Guide 7
The largest family of polymers produced by Ashland is based on n-vinyl-2-pyrrolidone and cellulose ethers. These include polyvinylpyrrolidone (PVP) homopolymers and copolymers. The latter contain functionality from coreactants, including vinyl acetate, PVP/VA, alpha-olefin, and Ganex™/Antaron™ 1 copolymers. Dimethylaminoalkylene-methacrylate or -methacrylamide copolymers and their derivatives make up the Gafquat™ and styrene and Polectron™/Antara™ 430 copolymers.2 Many properties are shared among the groups, but each also has unique characteristics, varying with structure. The following are examples:
• PVP: high polarity, dispersancy, hydrophilicity, adhesion, cohesivity and high Tg.
• PVP/VA: thermoplasticity, oxygen permeability, varying hydrophilicity and adhesion.
• Ganex/Antaron copolymers: hydrophobicity, an emulsifier and dispersant for nonaqueous systems.
• Gafquat copolymer: basicity, substantivity and high charge density.
• Polectron/Antara copolymers: thickening and opacifying emulsion.
Ashland also offers polymers based on V-Cap reactive monomer. These include vinylcaprolactam homopolymers, copolymers with vinylpyrrolidone and terpolymers containing both lactam monomers and dimethylaminoalkylene-methacrylate or -methacrylamide. These polymers are generally more hydrophobic than the V-Pyrol reactive monomer-based products mentioned above but offer many of the functional properties inherent in the lactam ring. Among other applications, Inhibex™ polymers are highly efficient as inhibitors of gas hydrate formation.
A range of alternating copolymers based on methylvinylether and maleic anhydride are produced by Ashland:
• The Gantrez™ AN family of methylvinylether/maleic anhydride copolymers is characterized by aprotic polar solvent solubility and reaction with protic compounds such as water, alcohols and amines with facile film formation.
• The hydrolyzed Gantrez S polycarboxylic acid resins function as dispersants, divalent cation binding agents and polymeric acidifiers.
Performance polymers
Acrylate Chemistry
Ashland offers one of the world’s broadest portfolios of high-performing acrylate chemistry. The breadth of our product portfolio means that we can offer chemistry that is highly targeted to particular applications. Our products include rheology modifiers, dispersants, cobinders and emulsifiers that work as processing aids and performance enhancers for applications as diverse as paint and coatings, cleaning products, oilfield chemicals, textile manufacture, water treatment and more.
Cellulose Ethers
Cellulose ethers are divided into ionic and nonionic types. The ionic cellulose ethers, Aqualon™/Blanose™/Bondwell™/AquaVIS™ sodium carboxymethylcellulose, contain substituents that are anionic electrically charged. Nonionic cellulose ethers include Natrosol™ hydroxyethylcellulose, Benecel™ and Culminal™/Combizell™ methylhydroxyethylcellulose, methylcellulose and methylhydroxypropylcellulose, Klucel™ hydroxypropylcellulose and Aqualon™ ethylcellulose and carry electrically neutral substituents. Nonionic cellulose ethers can be further classified by their solubility in cold, warm or hot water, and in organic solvents.
Cellulose is a polysaccharide composed of anhydroglucose units, which are linked through beta-glycosidic bonds. The number “n” of anhydroglucose units in the polymer chain is defined as the degree of polymerization (DP).
Each anhydroglucose ring carries three free OH groups at positions 2, 3 and 6. Ethers of cellulose are formed by substituting one or more of the three hydroxyl groups. The distribution of the substituents introduced onto the polymer chain is largely determined by the relative reactivity of these three OH groups.
The number of substituted hydroxyl groups per anhydroglucose unit is expressed as DS or average degree of substitution. The DS can vary between 0 and 3. In the case of alkoxylation, the molar ratio of alkoxy groups in the side chains to cellulose is specified and expressed as the average molecular substitution (MS). Instead of DS and MS, the weight percent of the substituents in the cellulose ether is often quoted. The use of one etherification agent in the substitution process results in a simple cellulose ether, whereas using different kinds of agents leads to mixed ethers. Industrial cellulose ethers are alkyl, alkylhydroxyalkyl, hydroxyalkyl and carboxyalkyl ethers.
1 Ganex™ is sold as Antaron™ in Europe and Canada.2 Polectron™ 430 is sold as Antara™ 430 in Europe and Asia Pacific.
8 Performance Specialties Reference Guide
Specialty chemicals
Ultraviolet Absorbers
The Escalol™ family of UV absorbers are high-boiling, water-insoluble liquid esters with broad absorption in the UV-B radiation region (290 to 320 nm).
Carbonyl Iron Powder
Micropowder™ iron powders are characterized as fine, high-purity, micron-size spherical particles with superior electronic and magnetic properties.
Foam Control Agents
Drewplus™ and Advantage™ defoamers comprise a range of proprietary products that effectively control foam and entrained air in industrial processes and wastewater systems. In addition to collapsing or breaking down existing foam, the products remain on the water’s surface to prevent the formation of future foam. Ashland offers a range of highly efficient, hydrocarbon-, vegetable oil-, polysiloxane- and polyglycol-based antifoaming agents.
Rheology Modifiers
Aquaflow™ nonionic synthetic associative thickeners (NSATs) are efficient thickeners for high-performance waterborne coatings. These easy-to-handle liquids build rheology in paints and coatings through self-association and interaction with other ingredients. Aquaflow rheology modifiers are based on hydrophobically modified polyacetal-polyether (HM-PAPE) chemistry and are designed to function as drop-in replacements for urethane-type (HEUR) thickeners.
Performance polymers
Performance Specialties Reference Guide 9
Surfadone™ LP-100 solvent/wetting agent N-octyl-2-pyrrolidone
Applications
• Soil penetrant and softener in hard-surface cleaners, laundry prespotters and metal cleaning.
• Wetting agent for dish washing, industrial and institutional cleaners.
• Isopropyl alcohol replacement in fountain solutions.
• Solvent for polymers and hydrophobic substances.
• Pigment dispersion aid and pigment conditioning solvent.
• Component of photoresist strippers.
• Wetting agent for aqueous systems.
• Component in microemulsifying systems.
Physical Properties
Boiling point 100 °C @ 0.3 mm Hg
Vapor pressure <0.001 mm Hg @ 25 °C
Flash point 113 °C
Freezing point -25 °C
Viscosity 8 cP @ 20 °C
Minimum equilibrium surface tension 28 mN/m @ 1200 ppm
Minimum dynamic surface tension 35 mN/m @ 10 bubbles/sec
Chemistry
Surfadone LP-100 wetting agent is a low-foaming, nonionic rapid wetting agent with an HLB of 6 and having no critical micelle concentration. Due to the electron delocalized lactam ring, Surfadone LP-100 wetting agent interacts with anionic surfactant micelles. This greatly enhances its water solubility, resulting in a synergistic surface tension reduction and wetting enhancement at low concentrations.
Surfactants, solvents and intermediates
Surfadone LP-300 solvent/wetting agent N-dodecyl-2-pyrrolidone
Applications
• High-boiling solvent for polymers and hydrophobic substances.
• Substitute for fluorocarbon surfactants used for oil well stimulation.
• Additive in hand or automatic dish washing detergents.
• Ingredient in pressure-sensitive adhesives.
Physical Properties
Boiling point 145 °C @ 0.2 mm Hg
Flash point 116 °C
Freezing point 10 °C
Viscosity 17 cP @ 25 °C
Minimum equilibrium surface tension 26 mN/m @ 20 ppm
Chemistry
Surfadone LP-300 wetting agent is sparingly soluble in water (0.02 weight percent) and soluble in most organic solvents. It is a low-foaming, nonionic surfactant with an HLB of 3 and has no critical micelle concentration. Like its lower homolog, Surfadone LP-300 wetting agent interacts with anionic surfactants forming mixed micelles that greatly enhance its solubility, resulting in a synergistic surface tension reduction and wetting enhancement. Appropriate combinations of Surfadone LP-300 wetting agent and anionic surfactants produce viscous solutions and gels.
10 Performance Specialties Reference Guide
Easy-Wet™ 20 wetting agent
Applications
• Hard-surface cleaners.
• Glass and tile cleaners.
• Industrial and institutional cleaners.
• Textile processing.
• Pigment wetting.
Benefits
• Faster wetting.
• Lower use levels.
• Low contact angles.
• Improved spreading on most surfaces.
• Better equilibrium surface tension.
• Enhanced cleaning performance.
Physical Properties
Physical form Clear liquid
pH (10 wt% aq.) 4.0-6.0
Viscosity 15-30 cP @ 25 °C
Specific gravity @ 25 °C 0.92-0.95
Chemistry
Easy-Wet 20 wetting agent is a proprietary super-wetting agent in a convenient-to-use liquid form. Easy-Wet 20 wetting agent is a cost-effective premium wetter/surfactant suitable for HI&I cleaning, textiles, pigments and other industrial applications where superior wetting and spreading performance is required.
Surfactants, solvents and intermediates
Performance Specialties Reference Guide 11
Product Salt Form
Chemical Description/ Moles of EO
Typical Active Content [%]
Typical Viscosity [cP at 25 ºC]
Surface Tension: 0.1 Active wt% in water;
pH ~7[dynes/cm]
Relative Solubility in Water
Dextrol OC-20/22 HPhosphate Ester of Nonylphenol Ethoxylate (10 moles)
97 5,600 35.3 Hydrophilic
Dextrol OC-15 HPhosphate Ester of Nonylphenol Alcohol Ethoxylate (6 moles)
97 3,600 30.3
Dextrol OC-100 HPhosphate Ester of Nonylphenol Alcohol Ethoxylate (3 moles)
97 36,000 33.4 Hydrophobic
Dextrol OC-94 HPhosphate Ester of Decyl Alcohol Ethoxylate
98 20,000 Hydrophilic
Dextrol OC-93Z HPhosphate Ester of Tridecyl Alcohol Ethoxylate
99 3,500
Dextrol OC-70 HPhosphate Ester of Tridecyl Alcohol Ethoxylate (10 moles)
97 800 36.2
Dextrol OC-60 HPhosphate Ester of Tridecyl Alcohol Ethoxylate (6 moles)
97 800 30.1
Dextrol OC-97 HPhosphate Ester of Lauryl Alcohol Ethoxylate
98 1,500
Dextrol OC-40 HPhosphate Ester of Tridecyl Alcohol Ethoxylate (3 moles)
97 800 26.5 Hydrophobic
Strodex FT-100 H Phosphated Alcohol 99 4,000 50 Hydrophilic
Strodex LH-55 HPhosphate Ester of Nonylphenol Ethoxylate
80 10,000
Strodex SE-100 HPhosphate Coester of Aliphatic Ethoxylate Mixture
96 200 27.9
Strodex P-100 HPhosphate Coester of Alcohol and Aliphatic Ethoxylate
98 600 29.8
Zenix 4617 HPhosphate Ester of Oleyl Alcohol Ethoxylate
98 3,300
Strodex MO-100 H Phosphated Alcohol 98 1,300 43 Hydrophobic
Phosphate esters and specialty surfactantsDextrol™ and Strodex™ phosphate ester surfactants are leading technologies within our ever-expanding portfolio of high-performance additives. Dextrol and Strodex surfactants have been developed for high performance in a variety of end-use applications by engineering specific chemistries under precisely controlled reaction conditions. Dextrol and Strodex are unique mono- and diester phosphates as well as specialty surfactants that provide wetting, improve dispersion and emulsion stabilization, and provide corrosion protection.
Surfactants
Bold = Not available in EMEA
PO4-2 Monoester
PO4-1 Diester
PO4-1 Coester
12 Performance Specialties Reference Guide
Surfactants
Bold = Not available in EMEA
Product Phosphate Acid Source
Salt Form
Chemical Description/ Moles of EO
Typical Active
Content [%]
Typical Viscosity [cP
at 25 ºC]
Surface Tension: 0.1 Active wt% in Water;
pH ~7 [dynes/cm]
Relative Solubility in
Water
Dextrol OC-7525 Dextrol OC-70 NH4
10 25 600 36.2 Hydrophilic
Dextrol OC-78N Dextrol OC-70 Na 10 89 15,000 36.2
Dextrol OC-6025 Dextrol OC-60 NH4
6 25 600 26.5
Dextrol OC-180 Dextrol OC-60 K 6 45 600 30.1
Dextrol OC-180HS Dextrol OC-60 Na 6 90 2,000
Dextrol OC-50 Dextrol OC-15 Na 6 90 6,000 30.3
Dextrol OC-4025 Dextrol OC-40 NH4
3 25 600 26.5
Dextrol OC-45N Dextrol OC-40 Na 3 82 8,600 26.5 Hydrophobic
Strodex FT-50K Strodex FT-100 K Phosphated Alcohol 50 < 100 50 Hydrophilic
Strodex SEK-50D Strodex SE-100 KPhosphate Coester Aliphatic Ethoxylate Mixture
50 100 27.9
Strodex TH-100 K Proprietary Blend 81 300
Strodex FT-427 K Proprietary Blend 89 100
Strodex FT-428 K Proprietary Blend 76 350
Strodex PLF-100 Na Phosphate Coester 82 1500
Strodex LFK-70 L Phosphate Coester 70 400 35.8
Strodex PSK-28 K 55 50 28.4
Strodex NB-20 Proprietary Blend Na 99 500
Strodex PK-90 Strodex P-100 KPhosphate Coester Alcohol and Aliphatic Ethoxylate
90 7,000 29.8
Strodex PK-95G Strodex P-100 KPhosphate Coester Alcohol and Aliphatic Ethoxylate
80 1,700 29.8
Strodex PK-85NV Strodex P-100 KPhosphate Coester Alcohol and Aliphatic Ethoxylate
65 250 29.8
Strodex PK-OVOC Strodex P-100 KPhosphate Coester Alcohol and Aliphatic Ethoxylate
35 280 30.5
Strodex MOK-70 Strodex MO-100 K Phosphated Alcohol 70Partial Gel
>100K36.9
Strodex KM-400LV Strodex MO-100 K Phosphated Alcohol 60 100 43
Strodex EHK-70 K Phosphated Alcohol 70Partial Gel
>100K43 Hydrophobic
Performance Specialties Reference Guide 13
Emulsifiers, dispersants and lubricantsAshland has a broad family of water-insoluble esters and hydroxyesters sold under the Ceraphyl™ and Cerasynt™ trademarks as lubricants, dispersants and emulsifiers. These chemicals typically are surface active and find use in specialty, HI&I, plastics, textile, photography, inks and coatings markets.
Product Chemical Name Applications
Ceraphyl 28 Hexadecyl lactate • Tissue paper lotion • Printing plate protection
Ceraphyl 31 Lauryl lactate • Tissue paper lotion
Ceraphyl 41 C12
- C15
alkyl lactate • Plasticizing effects
Ceraphyl 45 Bis (2-ethylhexyl) malate • Dispersant aid for electroluminescent devices
Ceraphyl 50 Tetradecyl lactate • Viscosity regulator in laundry detergents
Ceraphyl 55 Tridecyl neopentanoate
Ceraphyl 140 Decyl oleate• PVC plasticizer• Textile finishing surfactant
• O/W emulsions
Ceraphyl 140A Isodecyl oleate
Ceraphyl 230 Diisopropyl adipate• Plasticizing effects• Lubricant • Hard-surface cleaners
• Erasable markers• Mold release agent • Inkjet inks
Ceraphyl 368 M 2-Ethylhexyl palmitate• Circuit board cleaning• Pigment dispersment inkjet inks• Hard-surface cleaners
• Tissue paper lotion • Lubricant
Ceraphyl 375 Isostearyl neopentanoate • Pigment dispersion
Ceraphyl 424 Tetradecyl tetradecanoate • Hard surface cleaner • Dispersant in magnetic recording media
Ceraphyl 494 Isocetyl stearate
Ceraphyl 791 Isocetyl stearoyl stearate • Pigment dispersions
Ceraphyl 847 Octyldodecyl stearoyl stearate • Pigment dispersions • Polycarbonate mold release agent
Ceraphyl ICA Isohexadecanol• Pigment dispersions• Mold release
• Graffiti removal • Polyester finishing agent
Ceraphyl NGA Maleated soybean oil
Ceraphyl ODS Octyldodecyl stearate • Polycarbonate mold release agent
Ceraphyl RMT Castor oil monomaleate
Ceraphyl SLK Isodecyl neopentanoate
Cerasynt 945Glyceryl stearate and polyoxyethylene lauryl ether
• Inkjet inks, pigment dispersion
Cerasynt IP2-Hydroxyethyl stearate and ethylene glycol
• Opacifier and pearlizing agent
Cerasynt M 2-Hydroxyethyl stearate • Pearlizing agent • Liquid detergent compositions
Cerasynt PA Propylene glycol monostearate• Hard-surface cleaners• Asphalt microdispersions
• Circuit board defluxing detergents
Cerasynt SD Glyceryl stearate
Emulsynt™ 1055 Polyglyceryl-4-oleate • Emulsifier
Emulsynt GDL Glyceryl dilaurate • Emulsifier
Surfactants, solvents and intermediates
A variety of esters is available with a range of properties, including liquids and waxy solids. In addition, amide and quaternary-ammonium salts are available.
A representative group of this product line is shown below.
14 Performance Specialties Reference Guide
V-Pyrol™ vinylpyrrolidoneN-vinyl-2-pyrrolidone
Applications
• Reactive diluent for radical initiated UV radiation curing used in vinyl flooring, wood coatings, release coatings, inks, etc.
• Numerous conventional polymerizations to generate an array of materials with a variety of properties as noted in the following polymer section.
• Gafgard™ 233 formulated UV-curable coating containing V-Pyrol vinylpyrrolidone and a multifunctional acrylate is used to impart high levels of abrasion resistance to coatings for plastic lenses, protective window films, credit cards, etc.
Physical Properties
Boiling point 193 °C @ 400 mm Hg
Melting point 13 °C
Vapor pressure <0.10 mm Hg @ 20 °C
Flash point 96 °C
Viscosity 2 cP @ 25 °C
Chemistry
V-Pyrol vinylpyrrolidone is a clear liquid stabilized with insoluble sodium hydroxide or soluble N,N’-di-sec-butyl-p-phenylenediamine. The latter inhibitor is supplied in V-Pyrol vinylpyrrolidone at concentrations of 25 ppm and at 100 ppm, respectively, for radiation curing and nonradiation curing applications. This monomer is known to be a supercooled liquid well below its freezing point of 13 °C. It can remain as a liquid at room temperature for extended periods. Rapid, exothermic crystallization under these conditions should not be confused with bulk polymerization.
V-Pyrol vinylpyrrolidone accelerates UV curing rates as the reactive diluent. Typically formulated with an acrylate oligomer, it imparts its unique solution viscosity reduction and enhanced adhesion to nonpolar substrates. The activated double bond of V-Pyrol vinylpyrrolidone facilitates its use in free radical homo- and copolymerizations and grafting reactions. The products of these reactions are either linear or crosslinked homopolymers and nonionic, anionic and cationic copolymers. Polymers from V-Pyrol vinylpyrrolidone are amorphous, and the pyrrolidone ring imparts hydrophilicity, adhesiveness, strength and complexing capability.
V-Cap™ vinylcaprolactam N-vinyl-2-caprolactam
Applications
• Reactive diluent for radical-initiated UV radiation curing used in inks (especially silkscreening), vinyl flooring, wood coatings, release coatings, etc.
• Conventional polymerizations to generate materials that have more hydrophobic character than analogous V-Pyrol vinylpyrrolidone based products.
Physical Properties
Boiling point 116 °C @ 10 mm Hg
Melting point 35 °C
Vapor pressure <0.1 mm Hg @ 20 °C
Flash point 114 °C
Viscosity 3.5 cP @ 40 °C
Chemistry
V-Cap vinylcaprolactam is a pale yellow crystalline solid stabilized with 10 ppm N,N’-di-sec-butyl p-phenylenediamine and having chemical reactivity characteristics similar to those cited for V-Pyrol vinylpyrrolidone. Polymers synthesized from V-Cap vinylcaprolactam are significantly more hydrophobic than their V-Pyrol vinylpyrrolidone analogs but still exhibit the adhesiveness, strength and complexing capability characteristic of the lactam functionality. As with V-Pyrol vinylpyrrolidone, V-Cap vinylcaprolactam is a super-cooled liquid and can remain as a liquid at room temperature for extended periods. Rapid, exothermic crystallization under these conditions should not be confused with bulk polymerization.
V-Cap vinylcaprolactam accelerates UV curing rates as the reactive diluent. Typically formulated with an acrylate oligomer, it imparts unique solution viscosity reduction and enhanced adhesion to nonpolar substrates. The activated double bond of V-Cap vinylcaprolactam facilitates its use in free radical homo- and copolymerizations and grafting reactions. The products of these reactions are either linear or crosslinked homopolymers and nonionic, anionic and cationic copolymers. Polymers from V-Cap vinylcaprolactam are amorphous, and the caprolactam ring imparts hydrophobicity, adhesiveness, strength and complexing capability.
Vinyl monomers
Performance Specialties Reference Guide 15
Vinyl monomers
Rapi-cure™ DVE-3Triethyleneglycol divinyl ether
Rapi-cure DV E-3 is a reactive diluent/monomer for free radical curable coatings and printing inks. It provides benefits and properties for cationic systems.
Applications
• Difunctional reactive diluent.
• Cationic systems with epoxy and vinyl ether functional oligomers.
• Good solvency for onium salt photoinitiators.
• Imparts flexibility to cured films.
• Facilitates pigment wetting/dispersion.
• Charge transfer systems with unsaturated polyester oligomers for wood coatings.
• Free radical and hybrid systems with acrylate oligomers.
Physical Properties
Physical Form Colorless liquid with mild odor
Purity 98.5% and 96%
Boiling point 120-126 °C @ 18 mm Hg
Freezing point - 8 °C
Flash point 119 °C
Viscosity 3 mPa•s @ 25 °C
Refractive index 1.4695 @ 25 °C
Tg of homopolymer 20 °C
Skin irritation Minimal
Rapi-cure HBVEHydroxybutyl vinyl ether
Rapi-cure HBVE is a reactive intermediate for use as a diluent/monomer requiring rapid cure rate and increased hydrophobicity.
Applications
• Dual functionality.
• Reactive diluent in UV-curable coatings and inks and as cement additives.
• Acrylic acid modifier for improving rheological profile.
• Imparts flexibility and reactivity.
Physical Properties
Physical Form Colorless liquid with mild odor
Purity 99.0%
Stabilized with 0.01% KOH
Boiling point 95 °C @ 20 mm Hg
Flash point 85 °C
Freezing point - 39 °C
Viscosity 5 mPa•s @ 25 °C
Refractive index 1.4620 @ 25 °C
Skin irriation Mild
16 Performance Specialties Reference Guide
PVP K-series
Polyvinylpyrrolidone is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder or a clear aqueous solution. Available in several molecular weight grades, it is characterized by K-value and used in various applications.
Performance polymers
Applications
• Dye transfer inhibition in detergents using PVP K-15 and K-30 to form complex fugitive.
• Textile dye stripping and strike rate control through complexation and dispersion with PVP K-30.
• Photoprocessing where sulfide salts are complexed by PVP K-30 in developing baths to inhibit redeposition on film.
• Laundry detergents where PVP K-30 inhibits soil redeposition.
• Emulsion polymerization where PVP K-30 latex stabilizer, functioning as a protective colloid, facilitates redispersion of a “broken” latex end-use application.
• Dispersions using PVP K-30 and K-90 for nonaqueous dye-and pigment-based writing ink delivery systems.
• Production of expandable polystyrene, with PVP K-90 used as the protective colloid.
• Polyvinylpyrrolidone and a number of its copolymers used as media components in digital inkjet printing.
• Hollow fiber membrane manufacture in which PVP K-90 and K-30 create voids and hydrophilic domains in polysulfone membranes.
• In oilfield cementing, PVP K-30 and K-90 serve as fluid loss control agents.
• On lithographic plates using hydrophobic inks, PVP K-15 provides enhancement of the nonimage area.
• PVP K-85 and 90 in stearate-based adhesive sticks for arts and crafts applications.
• On both ends of toilet paper rolls, PVP K-60 is used as an adhesive.
• In fiberglass sizing, PVP K-30 and K-90’s film-forming action promotes polyvinylacetate adhesion.
• As combustible ceramic binders, PVP K-30 and K-90 enhance green strength.
• In tablet binder formulations, PVP K-30 and K-90 are used for industrial and pharmaceutical applications.
• In CRT fabrication using negative photoresist technology, PVP K-90 is used with a chemical crosslinker in water-based coating systems.
• In production of electrolead hydrogels, PVP K-90 is crosslinked by E-beam irradiation to produce a conducting medium.
• In metal quenchant bath, PVP K-60, K-90 and K-120 are effective thickeners.
• PVP K-30 and K-90 are used for enzyme stabilization.
• Production of nano-sized metal pigments.
• Dispersant for carbon nano-fibers.
Performance Specialties Reference Guide 17
PVP K-series (continued)
Physical Properties
Gra
de
K-Va
lue
Rang
e
Avai
labl
e as
So
lid P
owde
r
PVP
Conc
entr
atio
n
Broo
kfiel
d Vi
scos
ity
cP
as i
s @
25
o C
Mol
ecul
ar
Wei
ght
(GPC
/MA
LLS)
K-12 10-14 Yes 5,000
K-15 13-19 Yes 30% 10 – 15 9,700
K-30 26-35 Yes 30% 200 – 500 66,800
K-60 50-62 No 31% 2,800 – 4,500 396,000
K-60 No 47% 137,000
K-85 83-88 Yes 825,000
K-90 88-100 Yes 10% 500 1,570,000
K-90 Yes 15% 2,500 – 4,000
K-90 Yes 22% 29,000 – 62,000
K-120 114-130 Yes 12% 48,000 – 75,000 3,470,000
Water absorbtivity ~17% water @ 60% RH/20 °C
Tg 130 - 180 °C, increases with Mw to Max. 180 °C
Film formation Hard, glossy, transparent, oxygen permeable
Film refractive index ~1.53 @ 25 °C
Solubility Characteristics
• Soluble in water and most polar solvents.
• Insoluble in esters, ethers, ketones and hydrocarbons.
PVP K-60 is currently available only as aqueous solutions. All other PVPs are available as dried powder or in solution.
Performance polymers
Chemistry
Polyvinylpyrrolidone (PVP) can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. Applications take advantage of one or more properties inherent in the polymer, typically due to the lactam ring.
High polarity and the resultant propensity to form complexes with hydrogen donors, such as phenols and carboxylic acids, as well as anionic dyes and inorganic salts.
Dispersancy, where components in a mixture are uniformly distributed through the use of polyvinylpyrrolidone.
Hydrophilicity, where the substantial water solubility of PVP is its dominant feature and frequently a factor along with other properties valuable to numerous applications.
Adhesion, taking advantage of the higher molecular weight PVP formulating in aqueous media, then evaporating sufficient water to generate a solid product for the desired application.
Cohesivity, where cohesive strength is achieved through a variety of dry blending and granulation techniques.
PVP is cross-linkable to a water-insoluble, swellable material either in the course of vinylpyrrolidone polymerization, by addition of an appropriate multifunctional comonomer or by post-reaction, typically through hydrogen abstraction chemistry.
18 Performance Specialties Reference Guide
Performance polymers
PVPP polymersPVPP (polyvinylpolypyrrolidone) is a highly cross-linked, amorphous, white, free-flowing polymer produced through a unique proliferous (popcorn) polymerization. Although insoluble in water, acids, bases and organic solvents, the polymers offered have swell volumes of between 4 and 8 ml/g in water. PVPP strongly complexes with phenols such as tannins, flavonoids and dyes, adsorbing these compounds within its interior cavities.
ViviPrint™ 540 polymers
Applications
• Digital printing media.
• Oilfield shale stabilization.
• Rheology modifier.
Physical Properties
Physical form 10-12% aqueous solution
Brookfield viscosity 5,000-20,000 cP as supplied 650 cP @ 5% solids
Molecular weight 600,000-800,000 (GPC)1 1,500,000-2,000,000 (MALLS)
Tg 174 °C
Chemistry
ViviPrint 540 is produced by a proprietary in-situ process resulting in a two-phase matrix consisting of soluble PVP and nanoscale PVP particles approximately 320 nm in size. This unique matrix allows for high viscosity, greater flexibility, better adhesion, curl resistance and improved water fastness in inkjet media compared to PVP K-90.
1 Determined relative to polyethylene oxide standards.
Performance Specialties Reference Guide 19
Performance polymers
Disintex™ disintegrants
Applications
• Tablet and granule disintegrants, high capillary activity and hydration capacity.
Physical Properties
Physical Properties
Disintex 75 disintegrant
Disintex 200 disintegrant
Chemistry PVPP PVPP inert salt
Particle size 75 µ 150 µ
Use level 2% 2%
Applications
• Hard tablet> 10 tons
• Dish washing tabs
• Hard tablet> 10 tons
• Dish washing tabs• Water-softening tabs
Chemistry
Disintex disintegrants are proprietary blends of PVPP, cellulose and/or inert salts. They are used extensively as disintegrants in laundry and dish washing detergent tablets, taking advantage of their swell volumes. The cross-linked PVPP homopolymers are highly hydrophilic and will rapidly absorb water on contact to swell and create internal stress points that will break up tablets.
Xxtradura™ 5636 (FlexiThix™) Rheology modifier
Xxtadura 5636 powdered rheology modifier is a PVPP that works under extreme conditions for aqueous or ethanolic or polar-oil based formulations. Capable of thickening aqueous and anhydrous formulations, Xxtradura rheology modifier is compatible with a wide range of ingredients, effective across a broad pH range (1-13) and has been shown to be stable with numerous solvents and acids. No neutralization is required.
Visc
osit
y (c
ps)
Concentration (% w/w)
Ethanol Water C12-15 Alkyl Lactate
1
10
100
1,000
10,000
100,000
0 1 2 3 4 5 6 7
Viscosity Protocol Viscometer: Brookfield DV-II+
Spindle: TD
RPM: 10
Time: 1 minute Temperature: 25°C
0
10,000
20,000
30,000
40,000
50,000
60,000
70,000
0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 pH
Visc
osit
y (c
ps)
Viscosity Protocol Viscometer: Brookfield DV-II+
Spindle: TD
RPM: 10
Time: 1 minute Temperature: 25°C
0
10,000
20,000
30,000
40,000
50,000
60,000
70,000
80,000
90,000
0 2 4 6 8 10 12
Visc
osit
y (c
ps)
Electrolyte Concentration (% w/w)
NaCl CaCl2 AlCl
3
Viscosity Protocol Viscometer: Brookfield DV-II+
Spindle: TD
RPM: 10
Time: 1 minute
Temperature: 25°C
20 Performance Specialties Reference Guide
Vinylpyrrolidone copolymersThe copolymers of vinylpyrrolidone and a number of other vinyl monomers are described on the following pages. These products are used in applications that benefit from the unique characteristics of the pendant pyrrolidone ring in combination with the properties of the comonomers’ functionalities.
Performance polymers
Polyplasdone™ and Polyclar™Polyvinylpolypyrrolidone
Polyplasdone, Polyclar and ViviPrint PS-10 polyvinylpolypyrrolidone (PVPP) are cross-linked homopolymers of vinylpyrrolidone (VP). These PVPPs are water-insoluble solids but retain many of the functional properties of polyvinylpyrrolidone (PVP). Many of the properties of PVPP are related to the unique pseudo cationic (zwitterionic) chemistry of pyrrolidone and effectively chemical complex phenolic and aromatic compounds via hydrogen bonding and dipole interaction and adsorb a variety of materials including dyes, printing inks, aromatic species (e.g., polyphenols) and colors in wine. They have high capillary activity and hydration capacity. Surface area typically ranges 1 to 1.5 m2/g. Product grades range in particle size from < 30 µm to > 200 µm. Smaller particle size grades (< 30 µm) can be used in digital printing applications with microporous silica as ink-receptive coatings to enhance drying of printed images, minimize impact on coating gloss, improve ease of formulation dispersion and reduce color variation and water resistance of printed images.
PVPP Functionality
• Disintegration.
• Dispersion.
• Complexation.
• Adsorption.
• Clarification.
Performance Specialties Reference Guide 21
Ganex™/Antaron™ polymersAlkylated polyvinylpyrrolidone
Sold as Antaron alkylated polyvinylpyrrolidone in Europe and Canada.
Applications
Ganex/Antaron alkylated PVP are relatively low molecular weight polymers varying in degree of hydrophobicity from water-soluble powder (P-904LC) to water-insoluble flaked solid (WP-660) and are useful in the following applications:
• Emulsifiers and dispersants in nonaqueous systems.
• Desensitizer/wax dispersants in melt-cast explosives.
• Dye dispersants for candles and shoe polish.
• Water-resistant film formers in wood coatings.
• Kinetic inhibitors against hydrate formation in oilfield operations.
• Asphaltene dispersants.
• Pigment dispersants in solvent-based coatings and inks.
Performance polymers
Physical Properties
Grade Copolymer Composition1
Tg/ Melting Pt. Viscosity2 Supplied
As
P-904LC90% VP,
10% C4 olefin155 °C 14 @ 25 °C(a) White
powder
V-51650% VP,
50% C16 olefin150 °C 300 @ 25 °C(b) 55% actives
in IPA
V-21620% VP,
80% C16 olefinMelting Pt.
8.5 °C2500 @ 50 °C(c ) Viscous
liquid
V-22030% VP,
70% C20 olefinMelting Pt.
~35 °C20M @ 80 °C(d) Wax
WP-6603 20% VP, 80% C30 olefin
Melting Pt. ~63 °C
Flaked solid
Bold = Not available in EMEA
1 VP= Vinylpyrrolidone, C4 alpha-olefin= 1-butene, C16 alpha-olefin= 1-hexadecene, C20 alpha-olefin= 1-eicosene, C30 alpha-olefin= 1-tricosene.
2 Brookfield, cP: (a) RVT #2, 20 rpm/10% solids; (b) RVT #3, 20 rpm/as is; (c) RVT #2, 20 rpm/neat; (d) RVT #5, 20 rpm/neat.
3 Material is not listed on the US EPA TSCA inventory.
Chemistry
Ganex/Antaron resins are copolymers produced from alpha-olefin and vinylpyrrolidone. The alkyl component varies from a C-4 to C-30 moiety in concentrations from 10 to 80%. The combination of vinylpyrrolidone and alkyl functionalities produces a balance of dispersing and waterproofing capacity in the Ganex/Antaron line.
22 Performance Specialties Reference Guide
PVP/VA polymersvinylpyrrolidone/vinyl acetate copolymers
Applications
PVP/VA polymers produce transparent, flexible, oxygen-permeable films that adhere to glass, plastics and metals. These properties, coupled with the ability to control their hydrophilicity through monomer composition, enable extensive industrial use:
• In remoistenable hot melt adhesives.
• In repulpable pressure sensitive adhesives where the water solubility of PVP/VA S-630 facilitates recycling.
• In hot melt adhesives for diaper wetness indicator systems.
• As a binder for dry-film photoresists.
• In solder masks utilizing aqueous processing.
• In inkjet coatings for improved print receptivity.
Physical Properties
PVP/VA Grade Supplied As ~Mw Tg (°C) low to high
Mw Range
E-335, -535, -635, -735
50% Ethanol solution
29,000-57,000 69, 96, 106, 117
I-335, -535, -735
50% IPA solution
13,000-22,000
71, 89, 108
W-635, -73550% Aqueous solution
15,000-27,000 99, 114
S-630 Dry powder 51,000 110
Performance polymers
Polymer %VP Increasing Humidity Resistance, Flexibility, Cohesive Strength
Increasing Water Solubility, Film Hardness, Adhesive Strength, Glass Transition Temperature and Propane/Butane Solubility
Series 100
E-735I-735W-735
70
W-635S-630
60
E-535I-535
50
E-335I-335
30
Bold = Not available in EMEA
Chemistry
PVP/VA polymer resins are linear, random copolymers produced by the free-radical polymerization of the monomers in ratios varying from 70/30 to 30/70 vinyl acetate to vinylpyrrolidone.
PVP/VA polymers are thermoplastic resins with molecular weights ranging from approximately 15 M-60 M. Their glass transition temperatures vary from 70 to 115 °C and hydrophilicity increases with vinylpyrrolidone content.
PVP/VA polymers are available as white powders or clear solutions in ethanol, isopropanol and water. Polymers in the four ranges of vinylpyrrolidone content (30, 50, 60 and 70%), are produced in ethanol or isopropanol. PVP/VA polymers with 60 and 70% vinylpyrrolidone content are available as solids or as 50% aqueous solutions.
In addition to being soluble in alcohols, PVP/VA polymers dissolve in esters and ketones but are insoluble in ethers and aliphatic hydrocarbons. The water-soluble PVP/VA polymers exhibit a 5% aqueous cloud point, i.e., the 60% vinylpyrrolidone content resin has a minimum critical solution temperature of 68 °C.
Bold = Not available in EMEA
Performance Specialties Reference Guide 23
Polectron™ 430/Antara™ polymerSold as Antara 430 PVP/Polystyrene latex in Europe and Asia Pacific.
Applications
Polectron 430 polymer, with a glass transition temperature of approximately 100 °C, gives transparent thermoplastic films that readily adhere to glass, plastics and metals. The emulsion, compatible with many polymers and surfactants, is typically used as:
• An opacifier and thickener for cleaning products.
• A hydrophobic coating for inkjet recording media.
• An oil-resistant coating.
• A cold-seal adhesive component.
Chemistry
Polectron 430 polymer is a white, thermoplastic, 38-41% solids latex produced as a graft, emulsion copolymer of 30% polyvinylpyrrolidone and 70% styrene in the presence of an anionic surfactant. The size distribution of the emulsion is such that 90% of the particles are <0.5 micron with a maximum 25 °C viscosity of 750 cP @ pH 2.0-5.0. Polectron 430 polymer is thermally and mechanically stable in the presence of a variety of ionic compounds. The viscosity is unaffected after three freeze-thaw cycles between ambient and -20 °C; the emulsion is unbroken at 25 °C after 1/2 hr @ 10,000 rpm and does not coagulate on addition of 1% hydrochloric acid, calcium chloride, alum or sodium borate.
Performance polymers
Vinylpyrrolidone/alkylaminomethacrylate and alkylaminomethacrylamide copolymers
Applications
These polymers have a number of unique properties such as substantivity to anionic materials that make them useful as:
• Dye receptors in inkjet and digital printing media.
• Adjuvants for electrodeposition of copper in printed circuit board fabrication.
Chemistry
The copolymers of vinylpyrrolidone and dimethylaminoethyl-methacrylate (VP/DMAEMA, X=O, y=2) or vinylpyrrolidone and dimethylaminopropyl-methacrylamide (VP/DMAPMA, X=N, y=3) are supplied as viscous solutions in either water or ethanol. These polymers serve to a great extent as precursors for cationic polymers through quaternization reactions on the pendant tertiary amino function. They are described on the following pages.
24 Performance Specialties Reference Guide
Sorez™ HS-205 and Gafquat™ copolymersVinylpyrrolidone/dimethylaminoethylmethacrylate copolymers (VP/DMAEMA)
Two VP/DMAEMA copolymers are quaternized with diethylsulfate-producing Gafquat 755/755N and Gafquat 734 VP/DMAEMA, which give transparent, glossy, tack-free, flexible films. The polymers are substantive to negatively charged surfaces and compatible with anionic and amphoteric surfactants. They have good adsorption properties with anionic dyes and pigments to enhance digital ink media. These copolymers are cross-linkable with aziridine and epoxides.
Physical Properties
Product Solution Mw1 Tg Brookfield Viscosity2
Copolymer 845 20% H20 1,000,000 172 °C 20,000-70,000
Copolymer 937 20% H20 1,000,000 104 °C 20,000-70,000
Copolymer 958 50% Ethanol80,000-150,000
100 °C 60,000-90,000
Gafquat 755/755N VP/DMAEMA
20% H20 1,000,000
155 °C/ 149 °C
20,000-70,000
Gafquat 734 VP/DMAEMA
50% Ethanol60,000-110,000
140 °C 30,000-70,000
Sorez HS-205 VP/DMAEMA
20% H20 1,000,000 172 °C 20,000-70,000
1 Determined by GPC using polyethyleneoxide standard.2 cP as is, @ 22-23 °C, RVT #7, 30 rpm.
Performance polymers
Gafquat HS-100 polymersVinylpyrrolidone/methacrylamidopropyl trimethylammonium chloride copolymer
The copolymer of vinylpyrrolidone/methacrylamidopropyl trimethylammonium chloride (MAPTAC) and vinylpyrrolidone, Gafquat HS-100 vinylpyrrolidone/methacrylamidopropyl trimethylammonium chloride copolymer gives transparent, glossy and tack-free flexible films. Amide linkage in the MAPTAC moiety imparts greater hydrolysis resistance. Typical of this cationic polymer family, Gafquat HS-100 vinylpyrrolidone/methacrylamidopropyl trimethylammonium chloride copolymer is substantive to negatively charged surfaces and compatible with anionic and amphoteric surfactants. (Material is not listed on the US EPA TSCA inventory.)
Physical Properties
Product Solution Mw1 Tg Brookfield Viscosity2
Gafquat HS-100 vinylpyrrolidone/methacrylamidopropyl trimethylammonium chloride opolymer
20% H20
900,000- 1,200,000
184 °C50,000- 125,000
1 Determined by GPC using polyethyleneoxide standard.2 cP as is, @ 22-23 °C, RVT #7, 30 rpm.
Performance Specialties Reference Guide 25
Styleze™ CC-10 and Setleze™ 3000 (ViviPrint™ 131) copolymersVinylpyrrolidone/dimethylaminopropylmethacrylamide copolymer
Applications
• Digital printing media.
• Settling agent for hard-surface cleaner (Setleze 3000 vinylpyrrolidone/dimethylaminopropylmethacrylamide copolymer).
Physical Properties
PropertiesStyleze CC-10 vinylpyrrolidone/
dimethylaminopropylmethacrylamide copolymer
Setleze 3000 (ViviPrint 131) vinylpyrrolidone/
dimethylaminopropylmethacrylamide copolymer
pH (as is) 6.0-8.0 6.5-7.8
Viscosity (cP) 10,000-35,000 6,000-24,000
Mw 1,200,000-1,500,000 1,500,000-2,000,000
Nanoparticles No Yes
Neutralized H2SO
4HCI
Tg 161 °C 167 °C
Chemistry
These high molecular weight copolymers have a strong affinity for anionically charged substrates, which can be further enhanced through quaternization. They produce transparent, flexible, high-gloss coatings with improved water resistance. Cross-linking significantly improves water resistance. Presence of the amide linkage imparts greater hydrolysis resistance. Compatible with nonionic, cationic and amphoteric surfactants, soluble in ethanol and water, insoluble (Styleze CC-10 vinylpyrrolidone/dimethylaminopropylmethacrylamide copolymer) and partially soluble (Setleze 3000 vinylpyrrolidone/dimethylaminopropylmethacrylamide copolymer) in acetone. Setleze vinylpyrrolidone/dimethylaminopropylmethacrylamide copolymers are produced by a proprietary in-situ process resulting in a two-phase matrix consisting of soluble copolymer and nanoscale particles approximately 320 nm in size that impart improved water resistance, light fastness and curl resistance in digital media applications.
Performance polymers
Styleze W polymers Vinylpyrrolidone/dimethylaminopropylmethacrylamide/methacryloylaminopropyl lauryl dimethyl ammonium chloride terpolymer
Applications
• Thickener for strong acid formulations such as toilet bowl cleaners.
• Inkjet-receptive media.
Physical Properties
Physical form Slightly hazy aqueous solution
Solids content 10% (W-10), 20% (W-20)
pH (as is) 3.5-5.0
Viscosity <5000 cP (W-10) 40,000-100,000 cP (W-20)
Molecular weight 2,700,000
Tg 135 °C
Chemistry
Styleze W polymers are random terpolymers of vinylpyrrolidone, dimethylaminopropyl methacrylamide and methacryloylaminopropyl lauryl dimethyl ammonium chloride. They promote and stabilize foam through their ability to reduce surface tension, have excellent adhesion to high-energy substrates, and are flexible, elastic, low-tack and heat-resistant films. Additional solution viscosity improvements can be achieved by the addition of salts. (Material is not listed on the US EPA TSCA inventory.)
26 Performance Specialties Reference Guide
Styleze 2000 and Acrylidone™ LM polymersVinylpyrrolidone/acrylic acid/lauryl methacrylate terpolymer
Acrylidone is not available in Europe.
Applications
• High-efficacy styling gels.
• Rinse aid in automatic dish detergents.
• Metal quenching.
• Inkjet-receptive media.
Physical Properties
Physical form White free-flowing powder
Molecular weight 1,010,000 (MALLS)
Tg 176 °C
Chemistry
Styleze 2000 is a high molecular weight, film-forming anionic terpolymer composed of vinylpyrrolidone and an acrylate backbone with a hydrophobic pendant C-12 chain. It is insoluble in ethanol and water until neutralized for easy dispersion. It exhibits synergistic thickening when combined with associative rheology modifiers.
Performance polymers
UltraThix™ P-100 crosspolymerAcrylic acid/VP crosspolymer
Applications
• Clear gels.
• Emulsion stabilizers.
Physical Properties
Physical form White, powder
Acid number 340-390
Viscosity (1% aq., 75% neutralized) 35,000-65,000 cP
Chemistry
UltraThix P-100 is an anionic polymer. It is a shear-thinning rheology modifier with high Brookfield yield to suspend solids. Compatible with anionic, nonionic and some cationic polymers. (Material is not listed on the US EPA TSCA inventory.)
Performance Specialties Reference Guide 27
Vinylcaprolactam polymers
Applications
Vinylcaprolactam-derived polymers give hard, glossy transparent films with excellent adhesive and cohesive properties. These products are also available in 2-butoxyethanol for application as kinetic gas hydrate inhibitors. The polymers also find use in many of the markets noted for polyvinylpyrrolidone. In general, vinylcaprolactam imparts reduced water solubility and cloud point relative to vinylpyrrolidone-based polymers while enhancing the hydrophobicity of the resin.
A range of V-Cap™ and V-Pyrol™ homo- and copolymers are available in a variety of solvents to facilitate uninterrupted flow in natural gas field pipelines at varying environments defined by brine content, temperature, pressure, composition and residence time from field to collection point. They are cited below as Inhibex™ polymers.
Physical Properties
Polymer Monomer Composition Solution Mw1 Viscosity2
Inhibex 50150% VCL/ 50% VP
50% butoxyethanol
5-8x103 3000-6000
1 Determined by GPC using polyethylene oxide standard. 2 Brookfield cP, as is, @ 25 °C, RVT #3, 20 rpm.
Gaffix™/Copolymer VC-713 polymer Vinylpyrrolidone/vinylcaprolactam/ dimethylaminoethylmethacrylate terpolymer
Sold as Gaffix™ VC-713 vinylpyrrolidone/vinylcaprolactam/ dimethylaminoethylmethacrylate terpolymer in North America.
Applications
• Gas hydrate inhibition.
• Flocculating agent.
• Film former in hair styling products.
• Inkjet-receptive media.
Physical Properties
Physical form Viscous ethanol solution
Molecular weight 82,700
Tg 152 °C
Chemistry
Vinylcaprolactam imparts increased hydrophocity and reduces tack. Water-soluble film former, pseudo cationic functionality, substantive to negatively charged surfaces. Quaternization yields cationic polymer; compatible with anionic, nonionic and cationic surfactants, silicones and thickeners.
Performance polymers
28 Performance Specialties Reference Guide
Performance polymers
Aquaflex™ SF-40 polymerVinylcaprolactam/vinylpyrrolidone/dimethylaminopropylmethacrylamide terpolymer
Applications
• Film-forming polymer in hair styling products.
• Inkjet-receptive media.
Physical Properties
Physical form Clear viscous ethanol solution
Molecular weight 37,500
Tg 119 °C
Chemistry
Transparent, flexible glossy films; pseudo cationic, substantive to negatively charged surfaces; quaternization yields cationic polymer; decreased tackiness and improved hydrocarbon compatibility due to V-Cap™ reactive monomer; water- and ethanol-soluble. (Material is not listed on the US EPA TSCA inventory.)
Aquastyle™ 300 tetrapolymerTetrapolymer of vinylpyrrolidone, vinylcaprolactam, dimethylaminopropylmethacrylamide and methacryloylaminopropyl lauryl dimethyl ammonium chloride
Applications
• Film-forming polymer in hair styling products.
• Inkjet-receptive media.
Physical Properties
Physical form Aqueous-alcoholic viscous liquid
% Active ~30%
Relative viscosity 1.90 - 2.35(1% in 0.2 N LiNO
3)
Molecular weight ~35,000
Tg 160 °C
Cloud point 46 °C (4% solids in aqueous solution)
Chemistry
Transparent, flexible glossy film; cationic; substantive to negative charged surfaces. Association with hydrophobically modified gellant to increase viscosity over nonionic polymers. (Material is not listed on the US EPA TSCA inventory.)
Performance Specialties Reference Guide 29
Performance polymers
Sorez™ 100 copolymerPolyethylene glycol polyester copolymer
Applications
• Soil release agent in laundry detergents, fabric softeners and pre- and post-wash stain removers.
• Ironing aid.
Physical Properties
Physical form Slightly turbid amber liquid
% Solids 75-77%
Chemistry
A modified polyester copolymer concentrate in water-soluble form. The product imparts wicking properties to hydrophobic textiles. It provides soil release and anti-redeposition properties while reducing the electrostatic charge of treated polyester. The polymer forms a thin film on the substrate, enabling effective soil removal during subsequent wash cycles.
Chromabond™ polymersChromabond S-100 dye-complexing polymer
Applications
• Dye transfer inhibitors.
• Hard-surface cleaners.
Physical Properties
Physical form Aqueous solution
% Solids 38-42%
Viscosity 850 cP
Molecular weight 35,000
pH (5% solution) 4-7
Chemistry
Chromabond polymer contains betaine (S-100) functionalities. Chromabond dye-complexing polymer is a premium dye transfer inhibitor (DTI), developed and used in color-safe laundry detergents. Chromabond polymer demonstrates superior complexing of fugitive dyes at cost-effective levels under different temperatures and surfactant environments. Its chemical structure promotes dye complexation up to 60 °C, while resisting interaction with anionic surfactants. Chromabond polymer is soluble in water and water-alcohol mixtures but insoluble in most other solvents.
30 Performance Specialties Reference Guide
Performance polymers
Aquaflow™ Hydrophobically modified polyacetal-polyethers
Aquaflow rheology modifiers are nonionic synthetic associative thickeners. Thickening results from self-association and association with the latex particles. They are surface active, stable over a broad pH range (4-12), and more salt tolerant than commercial HEURs (hydrophobe-modified ethoxylated urethanes). The Aquaflow product line contains both high-shear and low-shear nonionic thickeners.
Physical Properties
Applications
• Inks.
• Water-based adhesives.
• Water-based coatings.
• Water-based latexes.
Chemistry
Aquaflow polymers have poly(acetal- or ketal-polyether) backbones that are either linear or branched. The polyethers (as precursors for the final polymer) are water-soluble polyalkylene oxide or copolymers of polyalkylene oxides. The hydrophobes are chosen to balance rheological properties and hydrophobic/hydrophilic interactions.
Aquaflow NSAT Product Shear Effect1
BF KU ICIActive
Solids, %Solvent
Free Value
XLS-500
XLS 525
25%
20%
Yes
Yes
• Improved sag/levelling balance• Increased Brookfield viscosity
XLS-530 20% Yes• Improved sag/levelling balance• Increased Brookfield viscosity
NLS-210 25% No • Low- and mid-shear effective
NLS-200
NLS-205
NLS-220
25%
17.5%
20%
No
No2
Yes
• Original Aquaflow NSAT KU builder• Excellent flow and levelling
NMS-450 19% Yes• Balance of KU & ICI viscosity – hybrid performance• Efficient high-shear driver in difficult-to-thicken latex systems
NHS-350 17.5% Yes• High-shear effective with some KU build• Excellent application properties
NHS-300 20% Yes • Original Aquaflow NSAT ICI builders
1 Low to high shear where BF=Brookfield, NJ, KU=Krebs Stormer, ICI=Cone and Plate.2 Aquaflow NLS-205 contains a VOC-free carrier.
Performance Specialties Reference Guide 31
Performance polymers
Gantrez™ copolymers
Gantrez AN copolymersPolymethylvinylether/maleic anhydride copolymer
Applications
Because of their unique chemical structure and reactivities, Gantrez copolymers function well as:
• Dispersants for fluorescent light phosphors.
• Microcapsule clusterants in carbonless paper and latex systems.
• Complex coacervates with gelatin to form the microcapsule wall in carbonless paper.
• Calcium encrustation inhibitors in laundry detergents.
• Acid layers in diffusion transfer film to neutralize alkaline developers and dyes.
• Intermediates in adhesive applications and liquid laundry detergent stabilizers.
• Imide derivatives for anti-reflective layers on silicon wafers prior to photoresist coating and light exposure.
• Gas fade inhibitors for Spandex* fibers.
• Water retention aids in concrete.
• Metal sequestrants.
• Anionic polyacids.
Physical Properties
Grade Viscosity1 Molecular Weight2
AN-119 0.1-0.5 130,000
AN-139 1.0-1.5 690,000
AN-149 1.5-2.5 1,250,000
AN-169 2.6-3.5 1,980,000
1 cSt 1% in MEK @ 25 °C, Cannon Fenske, tube size 100.2 SEC/LALLS detector.
Reaction of the anhydride functional group with essentially any molecule having an “active hydrogen” opens a wealth of opportunities to synthesize useful derivatives.
Chemistry
Gantrez AN copolymers contain alternating units of methylvinylether and maleic anhydride. The fundamental character of this polymerization requires that a maleic anhydride unit must be adjacent to a methylvinylether unit and vice versa, resulting in a true alternating copolymer. As shown in the table above, Gantrez AN (anhydride form) copolymer is available in the molecular weight range of 0.13 M-2.5 M. The polymers are white hygroscopic powders soluble in tetrahydrofuran and M-Pyrol™ solvent; they are insoluble in aliphatic and halogenated hydrocarbons. All four grades have a glass transition temperature of 151-154 °C, independent of molecular weight, and form transparent, tack-free films.
* Trademark owned by a third party.
32 Performance Specialties Reference Guide
Gantrez S copolymersPoly(methylvinylether/maleic acid) copolymer
Applications
• Calcium encrustation inhibitors in laundry detergents.
• Dispersant aids.
• Aluminum surface conditioning.
• Diagnostic test strips.
• Base-activated adhesives for peel-apart instant film.
Chemistry
Gantrez S95 and S97 copolymers have repeating co-maleic acid units produced by hydrolysis of Gantrez AN copolymer. The polycarboxylic acid derivatives with a pH of ~2 at 5% concentration are available either as viscous solutions or white powders. The vicinal dicarboxylic acid functionality of these materials is useful in a number of applications. The free acid forms are water-soluble, giving clear and tacky films. Solution rheology can be modified by the addition of salts and bases.
Gantrez MS copolymersPoly(methylvinylether/maleic acid) mixed-salts copolymer
Applications
• Bioadhesives.
• Inkjet coatings.
Chemistry
Gantrez MS-955 copolymer is a mixed salt of sodium/calcium and is supplied as a free-flowing powder. The copolymer is soluble in water and produces solutions with high viscosity.
Performance polymers
Gantrez ES copolymersPoly(methylvinylether/maleic acid) half esters copolymer
Applications
• Pigment dispersants in cosmetic formulations.
• pH-dependent soluble films (enteric coatings).
Chemistry
Ethyl, isopropyl and n-butyl half esters are produced by opening up the anhydride in alcohol. These polymers, based on Gantrez AN-119 copolymer, are sold as 50% solutions in ethanol or isopropanol. They are water-soluble when neutralized greater than 40% using either an organic or inorganic base. Adhesive strength can be adjusted through controlling the degree of neutralization. Films are flexible, clear and glossy and have improved water resistance compared to Gantrez S copolymer.
EasySperse™ polymeric dispersant rangePolymethylvinylether/maleic acid -butyl ethyl ester, sodium salt
Applications
• Dispersants for hydrophobic insectides, fungicides, herbicides.
• Dispersants for hydrophobic organic compounds (fragrances, emollients, essential oils, etc.).
Chemistry
EasySperse dispersant is a copolymer of the monobutyl/ethyl ester of poly (methyl vinyl ether/maleic acid) partially neutralized with sodium hydroxide. The material is supplied as a 25% aqueous solution and is an excellent film former.
8 8
Not available in EMEA
Performance Specialties Reference Guide 33
Stabileze™ QM polymerPoly(methylvinylether/maleic anhydride decadiene) crosspolymer
Applications
Stabileze rheology modifiers yield clear, aqueous gels that are shear-thinning and slightly thixotropic, having good shear, temperature and UV-A radiation stability. Stabileze crosspolymer is effective as a rheology modifier for:
• Thickeners.
• Coatings and inks.
• Sealants.
• Electroconductive gels.
• Deicing fluids.
• Pigment dispersants.
Chemistry
Stabileze QM polymer is produced in a manner similar to that of Gantrez AN copolymer but with the added monomer decadiene present to yield a crosslinked, water-swellable resin. The polymer is a white free-flowing powder with a glass transition temperature of approximately 150 °C. The solid can be dispersed in water without coagulating, and the anhydride function will hydrolyze directly or through the action of base. A neutralized 0.5% solution in water at pH 7 and 25 °C has a viscosity range of 45,000-70,000 cP.
Performance polymers
Not available in EMEA
I-Rez™ 160 copolymerIsobutylene/maleic anhydride copolymer
Physical Properties
Physical form Free-flowing white powder
Molecular weight 78,000-94,000
Tg 164 °C
Chemistry
I-Rez 160 copolymer is a linear, alternating copolymer of isobutylene and maleic anhydride that forms transparent, tack-free films and reacts with alcohols/amines to yield half esters/amides. It is soluble in aprotic solvents and forms gels with ketones and esters. Water solubility can be controlled by degree ring hydrolysis and neutralization. It is insoluble in alcohol and aliphatic hydrocarbons.
34 Performance Specialties Reference Guide
Aquaflex™ FX-64 copolymerIsobutylene/ethylmaleimide/hydroxyethylmaleimide copolymer
Applications
• Film formers.
• Adhesive/cohesive properties.
Physical Properties
Physical form Yellow viscous liquid
Molecular weight 39,000
Tg 135 °C
Chemistry
Aquaflex FX-64 copolymer is an imidized isobutylene/maleic anhydride copolymer that produces low-tack, glossy films supplied as 40% hydroalcoholic solution. (Material is not listed on the US EPA TSCA inventory.)
Performance polymers
Aquaflex XL-30 copolymerIsobutylene/dimethylaminopropyl maleimide/ethoxylatedmaleimide/maleic acid copolymer
Applications
• Film formers.
• Flexible coatings with low coefficient of friction.
Physical Properties
Physical form Straw-like hazy, viscous aqueous solution
Molecular weight 86,000
Chemistry
Aquaflex XL-30 copolymer is an isobutylene dimethylaminopropylmaleimide/ethoxylated maleimide/maleic anhydride copolymer that produces highly flexible, glossy and humidity-resistant films and forms clear gels with anionic rheology modifiers. (Material is not listed on the US EPA TSCA inventory.)
Performance Specialties Reference Guide 35
Acrylates
Methacrylic Acid/Ethylacrylate Copolymers
Methacrylic acid/ethylacrylate copolymers act as thickeners. They are alkali-swellable (ASE) or hydrophobically modified alkali-swellable (HASE) polymers. They are generally used in aqueous, highly filled and surfactant systems.
Applications
Product Area
Jaypol AS1001
• Low-quality matt paint• Wood coatings• Spray applications• Adhesives/sealants• HI&I
Jaypol AT1• Gloss paint• Semi-gloss paint
Jaypol AT21
• Semi-gloss paint• Screen printing inks• Flexographic printing inks and over lacquers • HI&I
Jaypol AT4
• Matt/emulsion paint• Adhesives• Wood coatings• Screen printing inks• HI&I
1 Material is not listed on the US EPA TSCA inventory.
Physical Properties
Prod
uct
Type
Activ
e sol
ids (
%)
Salt
tole
ranc
e
Tem
pera
ture
to
lera
nce
Solu
tion
qual
ity
Rheo
logy
ty
pe (a
t 0.8
%
solu
tion)
Jaypol AS100 ASE 30 Moderate High Clear water white
Pseudoplastic; gel
Jaypol AT1 HASE 30 High Moderate Clear water white
Newtonian flow
Jaypol AT2 HASE 30 High Low Clear water white
Hybrid rheology; flow
Jaypol AT4 HASE 30 High Low Clear water white
Pseudoplastic; drop flow/gel
Performance polymers
Chemistry
Methacrylic acid/ethylacrylate copolymers are supplied as aqueous emulsions at pH 2 to 3 with typical molecular weights of 20,000 to 40,000. They are supplied with a range of cross-linking and hydrophobicity to optimize rheological properties and develop rheology by the swelling mechanism of the addition of suitable alkali with optimum rheology development between pH 6 to 12.
Liquid Dispersion Polymers
Jaypol AL is a range of high molecular weight liquid dispersion polymers, which when added to water swell to give thickening. The polymers are effective over a pH range of 4 to 12. They are a one-shot additive that can be incorporated at any stage of the formulation manufacturing process and can provide an opacifier effect.
Prod
uct
Activ
e
solid
s (%
)
Text
ural
re
spon
se
pH Pain
t
Adh
esiv
es/
Seal
ants
Text
iles
HI&
I
Jaypol AL 60 Promoting texture, spreadability – non-flow rheology
Secondary effect produces opacity
~7 S P P S
Jaypol AL2 60 ~6 P P
Jaypol 213 50 ~4 P
P = PreferredS = Standard
36 Performance Specialties Reference Guide
Performance polymers
Ashland™ 940 and 980 CarbomerAshland 940 and 980 carbomers are cross-linked polymers of acrylic acid that are useful thickening, stabilizing and suspending agents used in a wide variety of applications. Typical uses are as a stabilizing polymer in oil-in-water emulsions, as a suspending agent in surfactant-rich systems, and as a thickening agent. They produce a dispersion when added to water with a pH of ~3 and require neutralization with amine or inorganic hydroxide to activate. Ashland 940 and 980 carbomers are odorless and form a crystal-clear gel in water.
Typical Properties
Physical form White powder
Solids content (105 °C) 98.0 - 100%
Brookfield viscosity (25 °C, 0.2% aqueous gel neutralized) 13,000 - 30,000 cP
Brookfield viscosity (25 °C, 0.5% aqueous gel neutralized) 40,000 - 60,000 cP
Clarity, % transmission (neutralized solution at 0.5%, 420 nm) 85%
0
5000
10000
15000
20000
25000
30000
35000
40000
45000
2 4 6 8 10 12 14
Vis
cosi
ty (
mPa
.s)
pH
Ashland 980 carbomer pH effect on viscosity 0.5% polymer concentration
0
10000
20000
30000
40000
50000
60000
70000
80000
0.0 0.2 0.4 0.6 0.8 1.0 1.2
Vis
cosi
ty (
mPa
.s)
Aqualon 980 carbomer concentration (%)
Rheology profile of Ashland 980 carbomerin aqueous solution
Performance Specialties Reference Guide 37
RheoThix™ 601 thickening agentSodium polyacrylate
Applications
• Adhesives.
• Caulking.
• Sealants.
Physical Properties
Physical form Off-white milky dispersion
% Active 57-59
Viscosity 500 - 2000 cP
Chemistry
RheoThix 601 thickening agent is an anionic, pseudo-plastic thickening agent, emulsifying and stabilizing ingredient that improves performance. It can be incorporated into the water phase, into the oil phase and after the oil is emulsified to provide uniform thickening without neutralization, pre-swelling or pre-heating. The recommended use level is 0.2 - 2.5% based on solid content.
Homo- and Copolymers of Acrylamide
Ashland acrylamide homo and copolymers are supplied in a wide range of physical forms: solution, liquid dispersion, and (LDP), emulsion or powder grade. Anionic and cationic products (Rapifloc A and C series) are available along with the nonionic powder Rapifloc N-1000. Polymers are offered in a range of molecular weights, cross linking, charge densities and active contents to meet specific desired application requirements.
Performance polymers
RapiThix™ A-100 Polymer
RapiThix A-100 polymer is a free-flowing, fully active white powder sodium polyacrylate for rheology. RapiThix A-100 polymer is designed for use in cold mix processes and is easy to use, shear-tolerant, shear-thinning and effective at low use levels.
• No pre-set oil phase.
• Makes oil-free systems possible.
• High solids content for higher efficiency.
Applications
• Mud viscosifier, shale swell inhibition and friction reducer in oilfield and civil engineering.
• Anti-capping, erosion control, improved water filtration, hydro-seeding lubricants and water absorbents in agriculture.
• Alternative rheology modifiers for extreme acid and alkali formulations.
Physical Properties
Physical form Fine powder
Solids content 85-95%
Viscosity (1% solution) 28,000-38,000 cP
pH (1% solution) 5.7-6.7
Visc
osity
(cPs
)
80,000
60,000
40,000
20,000
0Control Glycerol (40%) Propylene Glycol
(40%)Ethanol (20%)
38 Performance Specialties Reference Guide
Rapifloc™ A1-MGPolymer
Rapifloc A-1 MG polymer is a high molecular weight anionic polyacrylamide supplied as a free-flowing granular powder. It is completely soluble in water-producing solutions of high viscosity. It is of very high anionic charge.
Benefits
• Cost-effective.
• Completely water-soluble.
• Improved process efficiencies.
Applications
Rapifloc A-1 MG polymer has found application in a wide variety of mineral processing and civil engineering applications. It is essentially nitrogen-free, and its use in brine clarification does not give rise to the formation of nitrogen trichloride in subsequent electrolysis.
Applications include:
• Alkaline leach uranium circuits.
• Civil engineering.
• Brine clarification.
0
500
1000
1500
2000
2500
0.0 0.25 0.5
App
aren
t vis
cosi
ty (
cP)
Concentration (%)
Viscosity - concentration graphBrooksfield viscometer @ 25oC
Performance polymers
Physical Properties
Physical form Off-white granular solid
Particle size 99% < 2000 µm
Bulk density Approx. 0.85 g/m3
pH (0.5% solution, 25 oC) Approx. 6.0
Performance Specialties Reference Guide 39
Performance polymers
Physical Properties
CMC Category DS Type Viscosity limits, mPa•s @ 25 °C
Grade Type 7 9 12 Range Concentration
L
Ultra Low 7UL 12UL 10 - 25 6%
Extra Low 7EL 9EL 20 - 60 6%
Low-Low 7L1 90 - 130 6%
Low-Medium
7L2 150 - 250 6%
7L3 400 - 750 6%
Low-High 7L 25 - 50 2%
M
Medium-Low
7M1 50 - 100 2%
7M2 9M2 100 - 200 2%
Medium7 M 300 - 600 2%
7M8 9M8 12M8 200 - 800 2%
Medium-High
7M31 9M31 12M31 1500 - 3100 2%
7M65 9M65 3000 - 6500 2%
H
High-Low 7H 1500 - 2500 1%
High7H4 9H4 2500 - 4500 1%
7H5S 3500 - 5500 1%
High-High 7H9 4000 - 9000 1%
It is a derivatized cellulose. These, in turn, are composed of two anhydroglucose units (ß-glucopyranose residues). In this structure, n is the number of anhydroglucose units (which are joined through 1,4 glucosidic linkages), or the degree of polymerization, of cellulose.
Each anhydroglucose unit in the polymer contains three hydroxyl groups. By substituting carboxymethyl groups for some of the hydrogens of these hydroxyls, as shown in the figure, sodium carboxymethylcellulose is obtained. The average number of hydroxyl groups substituted per anhydroglucose unit is known as the “degree of substitution,” or DS. For example, DS Type “7” has a DS of 0.7. If all three hydroxyls are replaced, the maximum theoretical DS of 3.0 (impossible in practice) results.
Bondwell™, Blanose™, Aqualon™Carboxymethyl cellulose
CMC is a cellulose ether, produced by reacting alkali cellulose with sodium monochloroacetate under controlled conditions. It is an anionic water-soluble polymer.
Applications
Markets Applications Product Types or Functions
Batteries / Electronics
Lithium ion batteries carbon dispersant
Binder, film former, dispersion
Civil Engineering, Building and Construction
Rheology modifier, suspension agent, binder, extrusion aid, water flow blocking agent
Commercial and Institutional - Light Industry
Industrial cleanersAnti-redeposition aid, rheology controller
Mining and Extraction
Mineral processing, mining
Selective flotation depressant, pellet binder, mineral, dispersant
Adhesives and Sealants
Adhesives and sealants
Suspension agent, thickener, film former
Advanced Ceramics
Advanced ceramics
Binder (plasticizer and green strength), rheology modifier, controlled water release, suspension agent
Ceramics, Pottery and Porcelain
Ceramic glazes, traditional ceramics
Binder, film former, green strength additive, rheology modifier, suspension agent, thickener, water-retention agent
Foundries and Refractories
RefractoriesBinder, green strength enhancer, rebound or sumping reducer, stabilization agent
Housewares and Consumer
Freezer gelGel enhancer, rheology modifier, stabilization agent, thickener
Textiles TextilesFilm former, rheology modifier, sizing agent, thickener
TobaccoReconstituted tobacco, leaf glue
Binder, suspension agent
Pulp and PaperPaper, paper coatings, pigment slurries
Rheology modifier, suspension and stabilization agent, thickener, water-retention enhancer
40 Performance Specialties Reference Guide
Performance polymers
Ambergum™ water-soluble polymersAmbergum water-soluble polymers are low molecular weight cellulose polymers supplied as either powder or aqueous solution. They provide viscosity control and wetting uniformity. In addition, the anionic versions of Ambergum water-soluble polymers show dispersion properties useful in many applications to stabilize particles.
Applications
• Lithographic fountain solutions: Ambergum water-soluble polymers are a cost-effective alternative to gum arabic to provide clean viscosity control and unique rheology in gumming and fountain solutions. They function as wetting agents and can replace isopropyl alcohol in some systems. Ambergum water-soluble polymers are produced from reliable and stable raw material sources. When used in fountain solutions, they can help prevent emulsification and bleeding of the ink and can provide more uniform wetting of the printing plate.
• Civil engineering: Ambergum 1221 water-soluble polymer provides rheology control and enhances fluid loss control when used with bentonite in tunneling and drilling applications.
Product Charge Physical Form % Active
Ambergum 1221 Anionic Free-flowing powder 100%
Ambergum 3021 Anionic Pale amber liquid 30%
Ambergum 3085 NonionicPale yellow-green
liquid40%
Performance Specialties Reference Guide 41
Performance polymers
Natrosol™, Natrosol B, Natrosol Plus Hydroxyethylcellulose and hydrophobically modified hydroxyethylcellulose
Natrosol hydroxyethylcellulose (HEC), a nonionic, water-soluble polymer, is a white, free-flowing granular powder. Solutions of Natrosol HEC are pseudoplastic or shear-thinning. Natrosol HEC is easily dissolved in cold or hot water to give crystal-clear solutions of varying viscosities. Furthermore, low to medium molecular weight types are fully soluble in glycerol and have good solubility in hydro-alcoholic systems containing up to 60 percent ethanol. Natrosol HEC is generally insoluble in organic solvents.
Applications
Markets Applications Product Types or Functions
Building and Construction
External insulation and finishing systems (EIFS), joint compound, spray textures, tile adhesives, caulks and sealants, welding rods
Bond strengthener, lubricity and workability enhancer, rheology modifier, stabilizer, suspension agent
Commercial and Institutional
Fiberglass, industrial cleaners
Formation aid, rheology controller, thickener
Adhesives and Sealants
Wallpaper adhesivesLatex adhesivesPlywood adhesives
Thickening and lubricityThickening and water-bindingThickening and solids holdout
Advanced Ceramics
Advanced ceramics Suspension agent
Ceramics, Pottery and Porcelain
Traditional ceramics Suspension agent
Paint and Coatings
Emulsion polymerization, waterborne architectural coatings
Protective colloid, surface activity, rheology modifier
Energy / Civil Engineering
Hydraulic cements cement slurries, completion/workover fluids
Cement extender, filtration control additive, rheology modifier
Emulsion and Suspension Polymerization
PVAC and acrylic latices, PVC suspension, styrene polymerization
Protective colloid and surface activity, suspension olymerization
Paper Coating, size press solutions
Water-binding and rheology control, water-binding and solids holdout
TextilesLatex-back sizesGlass-fiber sizePrinting pastes
ThickeningFilm-formerThickening and water-binding
Binders Welding rodsCeramic glazeFoundry cores
Water-binding and extrusion aidWater-binding and green strengthWater-binding
42 Performance Specialties Reference Guide
Performance polymers
Chemistry
The Natrosol HEC polymer is a hydroxyethyl ether of cellulose. The structure of the cellulose molecule shows its chain composed of anhydroglucose units. By treating cellulose with sodium hydroxide and reacting with ethylene oxide, hydroxyethyl groups are introduced to yield a hydroxyethyl ether. B grades are more biostable with enhanced resistance to enzymatic degradation due to their substitution pattern. Grades treated to provide a powder that displays fast dispersion without lumping when added to water are designated by the letter R. This treatment does not alter the solution viscosity.
Natrosol™ HEC, Natrosol B HEC (continued)
Viscosity Specification of Natrosol (mPa•s) at 25 °C
Viscosity measured at a concentration of Brookfield LVF settingMolecular
Weight2
B-types1 Non-B Non-R 1% 2% 5% Spindle RPM
HHBR HHR HH 3.400-5.000 – – 4 30 1.3 x 106
H4BR H4R H3 2.600-3.300 – – 3 30 1.1 x 106
HBR HR H 1.500-2.500 – – 3 30 1.0 x 106
MHBR MHR – 1.000-1.500 – – 3 30 –
MBR MR M – 4.500-6.500 – 4 60 7.2 x 105
– KR – – 1.500-2.500 – 3 30 –
– GR G – 250-450 – 2 60 3.0 x 105
– – E – 25-105 – 1 30 –
– JR – – – 250-400 2 60 –
– – J – – 150-400 2 60 –
– LR L – – 100-180 1 30 9.0x 104
1 B-biostable grade.2 Molecular weight is estimated or calculated from intrinsic viscosity measurements.
Performance Specialties Reference Guide 43
Performance polymers
Natrosol™ Plus, Natrosol HE 3KB and Natrosol™ HE 10KNatrosol Plus, Natrosol HE 3KB and Natrosol HE 10K are nonionic water-soluble polymers, hydrophobically modified hydroxyethylcellulose (HMHEC). The hydrophobic modification consists of long-chain alkyl groups chemically bound to the polymer. The physical properties of unmodified HEC and HMHEC contribute increased solution viscosity and altered rheological properties.
Natrosol Plus HMHEC Physical Properties
Physical form white to off-white powder
Moisture, max 5%
Ash, max1 10%
Particle size, on U.S. 40, max 10%
Viscosity, 1% in water2 Grade 330 150-750 cP
Solution appearance clear
Solution pH 6.0-8.5
Hydrophobically modified HEC builds viscosity through hydrogen bonding with water molecules (as with traditional cellulosics), chain entanglement and association of the hydrophobic groups. Aqueous solutions of Natrosol Plus, Natrosol HE 3KB and Natrosol HE 10K are highly pseudoplastic (shear-thinning), with Natrosol HE 10K most pseudoplastic as a result of association of the hydrophobes. This association breaks down under shear, and viscosity drops quickly. The amount of pseudoplasticity is greater for Natrosol Plus, Natrosol HE 3KB and Natrosol HE l0K than for Natrosol. Unlike aqueous solutions, aqueous latex systems thickened with Natrosol Plus, Natrosol HE 3KB and Natrosol HE 10K HMHEC have superior rheology and are less pseudoplastic than Natrosol HEC.
• Improved rheology.
• Outstanding spatter resistance.
• Viscosity stability of latex systems.
• Biostability (similar to Natrosol B HEC).
• Color acceptance and development.
1 Calculated as Na2S0
4.
2 Brookfield at 6 rpm.
44 Performance Specialties Reference Guide
Performance polymers
Admiral™, Liberty™ and Natrosol™ Fluidized polymer suspensions
Ashland offers a series of fluidized polymer suspensions (FPS) of hydroxyethylcellulose (HEC) and carboxymethylcellulose (CMC) that are easily dispersed and dissolved in cold or hot water to produce solutions of varying viscosities. Ashland FPS formulations vary in active content from 15 to 45% and are environmentally friendly. Hydroxyethylcellulose and carboxymethylcellulose FPS suspensions are used as fluid rheology modifiers, fluid loss reducers, suspending agents or lubricants, particularly in applications where powdered products cannot be handled.
Benefits
• Easy to handle and meter.
• Low viscosity, pumpable.
• Quick and complete dissolution.
• Eliminates filtration problems.
• Addition of higher MW polymers.
Applications
• Drilling muds. • Civil engineering.
• Paper coatings. • Cement slurries.
• Completion/workover fluids. • Spacers/flushers.
• Gravel packing. • Cuttings injection.
Product Cellulose Carrier MW
Admiral 1089 HEC water Low
Admiral 3089 HEC water Medium
Admiral 3171 HEC water Medium
Admiral 3966 HEC water Medium
Admiral 5151 HEC water Medium
Admiral MO1030 CMC water High
Aqualon AQU D-3334 HEC water High
Natrosol MBR FPS HEC water Medium
Ecodura FLA 3962 HEC water Low
Ecodura TA 4283 HEC water High
Ecodura TA 4451 HEC water Low
Ecodura TA 4641 HEC water Medium
Liberty 3794 CMC oil Medium
Liberty 4969 CMC oil High
Natrosol 250 MHB FPS HEC water Medium
Natrosol FPS MH HEC water Medium
Natrosol FPS-H48 HEC water High
Natrosol FPS-HB HEC water High
Natrosol FPS-LO MHR HEC water Medium
Natrosol Liquid HHRP FPS HEC oil
Natrosol Liquid MR HEC oil
Natrosol Plus 330 FPS HEC water
Primaflo™ MP3295A CS HPMC water Medium
SC-50™ CMC oil High
Xxtradura™ GMH 4176 HEC water High
Performance Specialties Reference Guide 45
Culminal™, Benecel™, Combizell™Methylcellulose and its derivatives
Chemistry
Methylcellulose and its derivatives are made under rigidly controlled conditions by reacting alkali-cellulose with methyl chloride, resulting in methylcellulose (MC), ethylene oxide, resulting in methylhydroxyethylcellulose (MHEC), or propylene oxide, resulting in methylhydroxypropylcellulose (MHPC).
Performance polymers
46 Performance Specialties Reference Guide
Performance polymers
Methylcellulose
Application Properties / Features
• Cold water solubility
• Quality of solution
– Higher substitution leads to clearer solutions
• Solubility in organic solvents (special substitution)
• Water retention
– Higher viscosities have better water binding properties
• Rheology control/thickening/stabilizing effect
• Thermogelling
– Higher methoxyl substitution leads to a lower thermogelling temperature
– Higher methoxyl substitution causes a higher thermogel strength
• Binding
• Protective colloid/suspension/emulsion effect
• Adhesive power
– Lower viscosities giver better adhesion than higher viscosities
– Lower substitution level types give more adhesion
• Film formation
• Controlled release properties
Physical Properties
• Active content on dry basis min 98%
• Moisture content Culminal MC Benecel MC max 8% max 5%
• Sodium chloride content Culminal MC Benecel MC max 1.5% max 0.8%
• Bulk density Culminal MC Benecel MC 200-550 g/l 200-600 g/l
• Coarse max. 1% on 0.8 mm & 55-90% on 0.2 mm/ LaserDv50: 250 min.-450 max.
• P1-Type 3-10% on 0.2 mm / LaserDv90: 255 min.-330 max.
• P-Type 1-8% on 0.2 mm / LaserDv90: 255 min.-330 max.
• PF-Type max. 8% on 0.125 mm / LaserDv90: 170 min.-250 max.
• PFF-Type max. 40% on 0.063 mm / LaserDv90: 170 min.-250 max.
• R retarded dissolving version for easy solution make-up.
Performance Specialties Reference Guide 47
Culminal™, Benecel™Methylcellulose
• Designed for use as water retention aids, thickening and film-forming agents, protective colloids, and suspending and emulsifying agents.
• Thermogelling properties (temperature lower than MHPC and MHEC).
Physical Properties
Type Spec Average Viscosity Brookfield RVT (mPa•s)
OCH3 20% <=> 30%
Benecel A15C 1600 high
Benecel A4C 450 high
Benecel A4M 4000 high
Culminal MC 2000 S 2500 very high
Culminal MC3000 P 4000 high
Performance polymers
Culminal™, Benecel™ Methylhydroxypropylcellulose (MHPC)
• Designed for use as adhesives, binders, extrusion aids, plasticizers, protective colloids, rheology modifiers, stabilization agents, thickeners and water-retention agents.
• Thermogelling properties depending on the substitution pattern.
Physical Properties
Type
Spec Average Viscosity
Brookfield RVT (mPa•s) @ 20 oC
OCH3 20% <=> 30%
POOH 2%
<=> 12%
Culminal MHPC 400 R 450 high low
Culminal MHPC 500 PF 500 high low
Benecel K4M 4000 low high
Culminal MHPC 3000 P1R 4000 high low
Benecel E4M 4100 high high
Benecel E10M 6700 high high
Benecel K15M 10,000 low high
Culminal MHPC 20000 S 15,000 very high low
Culminal MHPC 724 18,500 high medium
Benecel K35M 19,000 low high
Culminal MHPC 20000 P 24,000 high low
Culminal MHPC 20000 R 24,000 high low
Benecel K100M 30,000 low high
Benecel K200M 60,000 low high
35.000
360058
K35M
Gelcurve of different cellulose ethers (4% solutions).
Gel Temp(oC)
Visco* 2%(mPas)
A4C2 54 400
E4M C 64
A4M2
3600
81
1 Brookfield RV 20 oC/20 rpm, 2% solution.2 European Pharmacopoeia.
Benecel
20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 Temperature (oC)
G*(
Pa)
10k
1k
10
1
Rheometer Bohlin CS 50
35.000
360058
K35M
Gelcurve of different cellulose ethers (4% solutions).
Gel Temp(oC)
Visco* 2%(mPas)
A4C2 54 400
E4M C 64
A4M2
3600
81
1 Brookfield RV 20 oC/20 rpm, 2% solution.2 European Pharmacopoeia.
Benecel
20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 Temperature (oC)
G*(
Pa)
10k
1k
10
1
Rheometer Bohlin CS 50
48 Performance Specialties Reference Guide
Performance polymers
Culminal™/Combizell™Methylhydroxyethylcellulose (MHEC)
• Designed for use as adhesives, binders, extrusion aids, plasticizers, protective colloids, rheology modifiers, stabilization agents, thickeners and water-retention agents.
• Thermogelling properties depending on the substitution pattern (higher than MHPCs).
Physical Properties
Type
Spec Average Viscosity
Brookfield RVT (mPa•s) @ 20 oC
OCH3 20% <=> 30%
EOOH 1% <=> 10%
Benecel™ ME 233 P 4700 low low
Combizell DE 6000 R 7000 high low
Culminal MHEC 3000 PFSM
4000 high high
Culminal MHEC 6000 PFS
7000 low high
Culminal MHEC 6000 PR
7000 high low
Culminal MHEC 8000 10,000 low high
Culminal MHEC 15000 PFF
20,000 low high
Culminal MHEC 15000 PFR
20,000 low high
Culminal MHEC 15000 PFS
20,000 low high
Combizell DE 25000 P 0 5 R
30,000 low high
Culminal MHEC 25000 PFF
30,000 low high
Culminal MHEC 35000 P1R
40,000 low high
Culminal C4053 45,000 high high
Adhesives Adhesive, binder, film former
AgChem Rheology modifier, stabilization agent, film former
Emulsions Rheology modifier, stabilization agent
Ceramics Extrusion aid, binder, rheology modifier, stabilization agent
Metal Processing Rheology modifier, stabilization agent
Mineral Slurries Rheology modifier, stabilization agent
Mining Rheology modifier, stabilization agent
Paint Removers Rheology controller, thickener, film former
Paper Coatings Rheology modifier, stabilization agent, film former
Pulp & Paper Rheology modifier, stabilization agent
Suspension Protective colloid, rheologyPolymerization modifier, stabilization agent
Tile Adhesives Open time, tensile strength, settling time, sag, flexibility
Tobacco Adhesive, binder, rheology modifier, stabilization agent
Type
Spec Average Viscosity
Brookfield RVT (mPa•s) @20 oC
OCH3 20% <=> 30%
EOOH 1% <=> 10%
Culminal MHEC 40000PF
45,000 low high
Culminal MHEC 70000PF
70,000 low high
Culminal Plus 1030PF1 6000 high high
Culminal Plus 1060PF1 7000 high high
Culminal Plus 2060PF1 18,000 high high
1 Modified MHEC.
1 Modified MHEC
Performance Specialties Reference Guide 49
Performance polymers
Klucel™ HPC Hydroxypropylcellulose
Klucel hydroxypropyl cellulose (HPC) is a nonionic water-soluble cellulose ether with a unique combination of properties, soluble in cold water and polar organic solvents, surface active, forms films of exceptional flexibility without addition of plasticizers and is a thermoplastic polymer that can be extruded or injection molded.
Applications
Markets Applications
Printing & Inks Lithography – alcohol replacement Water & solvent inks – thickener
Suspension Polymerization PVC secondary protective colloid, controls porosity
Injection Molding Formation of intricate parts, binder for filler or active material
Ceramics Processing aid, water retention, green body strength
Tobacco Binder, film former, processing aid for reconstituted tobacco
Paint Removers Thickener, retard solvent loss, cling on vertical surface
Adhesives Solvent-based systems or hot melts
Encapsulation Stabilizer, wall-forming polymer
Physical Properties
Concentration in Water Brookfield Viscosity
(25 °C, LVF, Moisture Free)
1 wt% 2 wt% 5 wt% 10 wt% Mw
Grade
H 1,275 - 3,500 - - - 1,150,000
M - 3500 - 7500 - - 850,000
G - 125 - 400 - - 370,000
J - - 125 - 450 - 140,000
L - - 65 - 175 - 95,000
E - - - 250 - 800 80,000
Solvents were tested using G viscosity types at 2% solids concentration by weight. All ratios indicated in this table are on a by-weight basis.
A. Clear and Smooth
Acetic acid (glacial) Isopropyl alcohol (95%)
Acetone: water (9:1) Methanol
Benzene: methanol (1:1) Methyl Cellosolve™
Cellosolve™ Methylene chloride: methanol (9:1)
Chloroform Morpholine
Cyclohexanone M-Pyrol™
Dimethyl formamide Propylene glycol
Dimethyl sulfoxide Pyridine
Dioxane t-Butanol: water (9:1)
Ethyl alcohol Tetrahydrofuran
Ethylene chlorohydrin Toluene: ethanol (3:2)
Formic acid (88%) Water
Glycerin: water (3:7)
B. Moderately Granular and/or Hazy
Acetone Methyl acetate
Butyl acetate Methyl ethyl ketone
Butyl Cellosolve™ Methylene chloride
Cyclohexanol Naphtha: ethanol (1:1)
Isopropyl alcohol (99%) Tertiary butanol
Lactic acid Xylene: isopropyl alcohol (1:3)
C. Insoluble
Aliphatic hydrocarbons Methyl chloroform
Benzene Mineral oils
Carbon tetrachloride Soybean oil
Dichlorobenzene Toluene
Kerosene Gasoline
Trichloroethylene Glycerin
Xylene Linseed oil
Chemistry
Hydroxypropylcellulose is manufactured by reacting alkali cellulose with propylene oxide at elevated temperatures and pressures. The propylene oxide can be substituted on the cellulose through an ether linkage at the three reactive hydroxyls present on each anhydroglucose monomer unit of the cellulose chain. Published information suggests that etherification takes place in such a way that hydroxypropyl substituent groups contain almost entirely secondary hydroxyls. The secondary hydroxyl present in a side chain is available for further reaction with the oxide, and chaining out may take place. This results in formation of side chains containing more than one mole of combined propylene oxide.
50 Performance Specialties Reference Guide
Performance polymers
Aqualon™ ECEthylcellulose
Aqualon ethylcellulose (EC) is a cellulose ether distinguished by its versatility. As a unique product with wide-ranging solvent solubility and film flexibility at low temperatures, ethylcellulose is frequently used in electronics in addition to a variety of other applications. EC provides high solution clarity, good thermal stability and even burnout and has very low decomposition temperatures.
Aqualon EC is a key binder for gravure printing inks as well as a thickening binder in flexographic and screen printing inks. In these applications, Aqualon EC polymers provide scuff resistance, adhesion, fast solvent release, film formation and outstanding rheology control.
Aqualon EC is soluble in a wide range of organic solvents, but is not water-soluble.
Applications
Markets Applications Product Types or Functions
ElectronicsSolar cells Plasma display panels
Binder, film former, rheology modifier, thickener
Packaging, Converting and Printing
InksBinder, film former, rheology modifier, thickener
CoatingsSpecialty, glass conductive
Thickener, film former
AdhesivesSolvent-based adhesives, hot melts
Rheology modifier, adhesion, flexibility
Pigments Solvent-based slurriesRheology modifier, binder, colloid
Wood Finishing Lacquers, varnishesRheology modifier, hardness, low-water pick-ups, low ash
Plastics Thermoplastics Handling, toughness
Pharmaceutical Tablets Binder release, control
InksSolvent-based Inks, printed circuit boards
Film former, rheology binder
Physical Properties
Ethoxyl Grade2 and Ethoxyl Percent
Viscosity1 Types N-Grade T-Grade X-Grade
Designation Limits (cps) 48.0-49.5% 49.6-51.5% 50.5-53.8%
4 3.0-5.5 — —
7 5.6-8.0 — —
10 8.0-11 —
14 12-16 — —
22 18-24 — 3
50 40-52 —
100 80-105 —
200 150-250
300 250-350 —
1 5% solution at 25 °C. Viscosity is determined in 80:20 toluene:ethanol by weight on oven-dried EC sample.
2 Types produced are designated X.3 Viscosity is 18-35 cP.
Chemistry
Ethylcellulose is a cellulose ether made by the reaction of ethyl chloride with alkali cellulose, as expressed by the reaction RONa + C
2H
5CI ROC
2H
5 + NaCI, where R represents the cellulose
moiety. The structure for the cellulose molecule is a chain of β anhydroglucose units joined together by acetal linkages. This is indicated in the figure above. These long, oxygen-linked anhydroglucose-unit chains have great strength, which is passed on to cellulose derivatives such as ethylcellulose. The properties of flexibility and toughness in these derivatives are directly attributable to this long-chain structure. The commercial product has a substitution value between 2.25 and 2.60 ethoxyl groups per anhydroglucose unit, or 44-52% ethoxyl content.
Ethoxyl, %45.5 46.5 47.5 48.5 49.5
Benzene
Toluene
Xylene
80:20 Toluene/Alcohol
Ehtyl Acetate
Butyl Acetate
Acetone
Methanol
Ethanol
N-Butanol
Ethylene Dichloride
Methylene Chloride
Performance Specialties Reference Guide 51
Performance polymers
Galactasol™ derivatized guar
Ashland’s derivatizes guar to offer nonionic hydroxypropyl guar as well as anionic and cationic guars. They are not affected by ionic strength or pH, but will degrade at pH extremes at temperature (e.g., pH 3 at 50 °C). They remain stable in solution over pH range 5-7. Strong acids cause hydrolysis and loss of viscosity, and alkalis in strong concentration also tend to reduce viscosity. They are insoluble in most hydrocarbon solvents. Derivatized guar shows high low-shear viscosity but is strongly shear-thinning. They are very thixotropic above 1% concentration, but below 0.3%, the thixotropy is slight.
Applications
Textile Used in printing and dyeing carpets.
Paper Used in the manufacturing of white and cardboard paper for dry strength fiber retention and improving drainage and yields.
Fire Fighting Used as a viscosifier in fire-retardant solutions dropped from airplanes to control the spread of forest fires.
Explosives Used as a water-blocking agent.
Mining Used in electrowinning (copper purification) and froth flotation.
AgChem Used for hydromulching, hydroseeding and drift control.
Chemistry
Guar gum is a polysaccharide composed of the sugars galactose and mannose. The backbone is a linear chain of β 1,4-linked mannose residues to which galactose residues are 1,6-linked at every second mannose, forming short side-branches.
D-galactopyranose
D-mannopyranose
Specialty chemicals
Escalol™ UV filtersAshland offers a number of UV absorbers for industrial applications under the Escalol trademark. The three octyl-esters, Escalol 557, 587 and 597 are high-boiling, water-insoluble liquids and have strong and broad absorption in the UV-B region between 290-320 nm and refractive indices in the range of 1.50-1.55. The benzophenone derivatives Escalol 567 and 577 UV are solids also having absorbance in the UV-B region.
Physical Properties
Grade Chemical Name Boiling or Melting Point
507 2-Ethylhexyl-p-dimethylaminobenzoate Bp 362 °C
5171-(4-Methoxyphenyl)-3-(4-ter-butylphenyl) propan-1,3-dione
Mp 81-86 °C
557 2-Ethylhexyl-p methoxycinnamate Bp 198-200 °C
567 2-Hydroxy-4-methoxybenzophenone Mp 62 °C min.
5775-Benzoyl-4-hydroxy-2-methoxybenzene sulfonic acid
Mp >120 °C
587 2-Ethylhexyl salicylate Bp 150 °C @ 3 mm Hg
598 2-Ethylhexyl 2-cyano-3,3- diphenylacrylate Bp 218 °C @ 1.5 mm Hg
HMS Homosalate
S1 2,2-[6-(4-methoxyphenyl)-1,3,5-triazine-2,4-diyl] bis {5-[(2-ethylhexyl)oxy]phenol}
Mp 80 °C
1 Material is not listed on the US EPA TSCA inventory.
Not available in EMEA
52 Performance Specialties Reference Guide
Iron Pentacarbonyl (IPC) Fe(CO)
5
Applications
Iron pentacarbonyl is an intermediate that has found utility in a variety of applications. In the past, it has been used as a fuel antiknock agent, a photochemical additive and an intermediate for many iron products. The most important current applications are:
• Catalyst for coal liquefaction, Fischer-Tropsch hydroformylation, olefin isomerization and water gas shift reactions.
• Precursor for chemically pure iron, iron oxides, iron catalysts and thin iron films.
• Desulfurization removal of sulfur from coal and petroleum products.
Physical Properties
Boiling point 103 °C
Melting point -20 °C
Specific gravity 1.453
Chemistry
Iron pentacarbonyl is a specialty chemical that is produced as an intermediate during the manufacture of carbonyl iron powders. It is produced from a high-pressure reaction between high-grade iron and carbon monoxide. This organometallic compound exists as a liquid at room temperature. It may ignite spontaneously in air and is decomposed by heat to metallic iron and carbon monoxide. In air it decomposes to iron oxides and in sunlight to iron nonacarbonyl. While Fe(CO)
5 is highly reactive, it
is stable in dark storage under nitrogen. It is soluble in common organic solvents such as acetone or toluene and insoluble in water or liquid ammonia. It is unreactive with most acids.
Micropowder™ Iron Carbonyl iron powders (CIP)
Applications
Carbonyl iron powder is manufactured by the chemical decomposition of iron pentacarbonyl. The resulting iron particles are uniform gray microscopic spheres with only traces of carbon, oxygen and nitrogen. Over 25 different grades of iron powder are manufactured through this process and marketed under the trade name Micropowder. Specific applications include:
• Radar absorbing materials (RAM).
• Precision electronic cores.
• Electromagnetic interference shielding products (EMI/RF).
• Metal injection molding (MIM).
• High-performance powder metallurgy products.
• Magnetic fluids.
• Halogen solvent waste remediation.
• Pharmaceutical iron supplement Ferronyl iron.
Physical Properties
The fine size and high purity of the carbonyl iron powders are the principal reasons for their superior properties compared to other forms of elemental iron powders. Distinct characteristics of the Micropowder Iron products include:
• Very fine spherical size.
• Submicron to 10 micron particle diameter.
• High purity with up to 99.5% iron content.
• Unique onionskin structure with cubic crystalline lattice.
• Superior electromagnetic properties.
• Uniform particle size distribution.
Chemistry
In terms of fundamental properties, there are two product families, the “S” grades and “R” grades. The S grades are standard iron grades with a purity level of approximately 97.5%. The impurity is comprised of carbon, oxygen and nitrogen and is the cause of the iron particle’s unique onionskin structure. R grades are higher purity iron grades with an average purity of 99.5%. Through a hydrogen reduction process, most of the residual carbon and nitrogen have been removed from the iron particle, producing a higher purity iron grade that is lower in durometer hardness and lacking the unique onionskin structure.
Specialty chemicals
Not available in EMEA
Performance Specialties Reference Guide 53
Carbonyl Iron Grades
Carbonyl Iron Grades
Properties Applications
Average Diameter (Microns)
% Iron Additive Powder Metallurgy Electronics Aerospace &
Defense
S-1000 7 – 9 >97 No Silica X
S-1100 4 – 6 >97 No Silica X
S-1281 4 – 6 >97 Silica
S-1640 3 – 5 >97 No Silica X
S-1641 3 – 5 >97 Silica X
S-1651 3 – 5 >97 Silica X
S-2101 2 – 4 >97 Silica X
S-2701 2 – 4 >97 Silica X
S-3000 1 – 3 >98 No Silica X
S-3001 1 – 3 >97 Silica X
S-3700 1 – 3 >97 No Silica X
S-5000 6 – 7 >97 No Silica X
S-5641 3 .4 – 5.0 >97 Silica X
R-1470 5 – 8 >99.5 No Silica X
R-1480 7 – 9 >99.5 No Silica X
R-1511 4 – 6 >98.5 Silica X
R-1521 4 – 6 >98.5 Silica X
R-2410 4 – 7 >99.5 No Silica X
R-2430 4 – 6 >99.5 No Silica X
MIL-E 3.3 – 5.7 >97 Silica X
NOTE: These properties represent typical numbers but are not considered sales specifications. Contact Ashland for technical information on other grades.
Specialty chemicals
54 Performance Specialties Reference Guide
Specialty chemicals
Drewplus™/Advantage™ defoamersAshland’s foam control agents are economical to use and versatile. They have been developed for use in a variety of water-based industrial applications to provide superior antifoam performance activity and compatibility. They are readily dispersible, provide excellent long-term foam control persistency, are highly effective on entrained, surface macro-foam and micro-foam, and offered in a wide range of chemistries (silica, silicone, organophically modified silicones, mineral oil, wax, etc.).
Base Carrier
Drewplus/Advantage™ reference Description Applications
Min
eral
Oil-
base
d Te
chno
logy
L-475 Silica/mineral oil Graphic art, pigment dispersion, oil well cementing
L-477K Silica/mineral oil Kosher printing ink
Y-381 Wax/mineral oil Inks and latex systems
L-464 Silica/wax/mineral oil Inks and latex systems
AM-1512 Hydrophobic silica in mineral oil (9% active) PSA adhesives, oil well cementing, fracturing
TW-4503 Silica/wax/mineral oil Fracturing S-PVC, acrylic emulsions, industrial inks
T-1201 Silica in mineral oil + compatibilizer Adhesives, PSA, SBR, acrylic emulsions
T-1202 Silica in mineral oil + compatibilizer EP, adhesives, SBR, PVP, PVA, acrylic
L-140 Silica in mineral oil + compatibilizer EPA, adhesives, inks, industrial coatings
T-2200 Silica in mineral oil + compatibilizer EC, EP, emulsions
T-3200 Silica in mineral oil + compatibilizer EP, adhesives, IC
T-3211Silica in mineral oil + compatibilizer and fatty acid (different grade of MO)
Adhesives, PSA
T-4200 Silica in mineral oil + compatibilizer Adhesives, EP, emulsions, SBR, PVA
L-108 Silica in mineral oil + compatibilizer S-PVC, pressure sensitive adhesives, acrylic emulsions
T-4201 Silica in mineral oil + compatibilizer S-PVC, EP emulsions
T-4202 Silica in mineral oil + compatibilizer and fatty acid Emulsions, EP
Y-250 Silica in mineral oil + compatibilizer Natural and synthetic, adhesives, cutting oils (metal working)
T-4303 Silica in mineral oil + compatibilizer and fatty acid EP, coatings, inks, adhesives (PSA), polyvinyl acetate systems
L-493 Silica in mineral oil + compatibilizer Industrial inks
210-951 (smokeless L-493)
Silica in mineral oil + compatibilizer Industrial inks
L-1311E Oil-based extended Coating inks, adhesives, can be used in high-gloss systems
L-131 Silica in mineral oil + compatibilizer Pressure sensitive adhesives, PVA emulsions, acrylic emulsions
L-198 Silica in mineral oil + compatibilizer Acrylic emulsions, PSA adhesives
L-768 Silicone/silica + compatibilizer Metal working fluids
Boos
ted
Min
eral
Oil-
base
d Te
chno
logy
T-4507 Silica/mineral oil (aggressive version) Adhesives and coatings, acrylic PVA SBR
T-4304Aggressive silica/mineral oil (self-emulsifying – spreads quickly throughout coatings)
Adhesives and coatings, acrylic PVA SBR, easy to incorporate
T-4304WIAggressive silica/mineral oil (self-emulsifying – spreads quickly throughout coatings)
Adhesives and coatings, acrylic PVA SBR, easy to incorporate
TS-4400 Silica/silicone/mineral oil Industrial process, paints, wastewater
W-4300Wax/mineral oil (aggressive) + compatibilizer – patented formulation – replaces MO and silicone technologies
All in one defoamer for let down and grind in, paints, industrial process and wastewater
W-4502 Aggressive wax in mineral oil Paint, ink, adhesives
Vege
tabl
e O
il-ba
sed
Tech
nolo
gy
AV-1425 Hydrophobic silica in vegetable oil Industrial coatings, metal working fluids, adhesives
Bold = Not available in EMEAPerformance Specialties Reference Guide 55
Specialty chemicals
Base Carrier
Drewplus/Advantage reference Description Applications
Trad
ition
al S
ilico
nes (
Stra
ight
PD
MS)
ba
sed
Tech
nolo
gy
L-418 Silicone/silica + compatibilizerGraphic art: pigment dispersion Gravure art: screen printing inks
L-419Silicone/silica + compatibilizer (excellent grind/ pigment dispersion FCA)
Graphic art: pigment dispersion Gravure art: screen printing inks
L-405 Silicone/silicone copolymer Gravure art: flexographic inks, high-gloss alkyds, epoxy systems
L-405 LV Low-VOC version of L-405Gravure art: flexographic inks, high-gloss alkyds, epoxy systems, pigment dispersion
TS-4385 Silca/silicone/silicone copolymer (work horse)Gravure art: screen printing inks, anticorrosive primers wood and reducible alkyd, pigment dispersion
TS-4387 Silica/organo/silicone copolymerGraphic art: pigment dispersion Gravure art: flexographic inks, screen printing inks
TS-5541 Silica/siliconeGraphic art: pigment dispersion Gravure art: flexographic Inks, screen printing inks, pigment dispersions
Qui
ck B
ubbl
e Br
eak
(O
M P
olys
iloxa
ne) b
ased
Te
chno
logy
S-4288 Polysiloxane emulsion High-gloss paints, inks
S-4287 Polysiloxane emulsion High-gloss paints, inks
S-4386 Polysiloxane emulsionGraphic art: pigment dispersion Gravure art: flexographic inks
210-796 Polysiloxanes Pigment dispersion, ink overprint varnish
210-852 Silica polysiloxane Pigment dispersion, ink overprint varnish, pigment paste
S-4273 Polysiloxane emulsion Gravure art: flexographic inks, pigment dispersion
Dis
solu
tion
Tech
nolo
gy
TS-4481 Hydrophobic silica/polysiloxaneGraphic art: pigment dispersion, Gravure art: flexographic inks, screen printing inks, wood coatings
S-4374 Silica/polysiloxane emulsionOverprint varnish, pigmented inks, gravure, flexographic and screen inks, wood coatings
S-4480 Polysiloxane + silicaGraphic art: pigment dispersion Gravure art: flexographic inks, screen printing inks Oil well cementing, fracturing, wood coatings
210-862 Polysiloxane + silicaGraphic art: pigment, dispersion Gravure art: flexographic Inks, screen printing inks Oil well cementing, fracturing, wood coatings
210-886 Polysiloxane emulsion Inks, flexo/screen printing, pigment dispersion
Pow
der
Def
oam
ers
Silipur™ RE29H Free-flowing white powder
Oil well cementing, civil engineering, grout, mortar, cement
RE 5500 Free-flowing white powder
56 Performance Specialties Reference Guide
Physical Properties
Product Physical Form
Viscosity (cPs or mPa•s)
Specific gravity @ 25 °C
pH (1.0 wt % solution)
pHLEX 100Clear to light- yellow liquid
~15 1.052 11-11.5
pHLEX 110Clear to light- yellow liquid
~15 1.055 11-11.5
pHLEX 400Clear to light- yellow liquid
~15 1.052 11-11.5
pHLEX 410Clear to light- yellow liquid
~15 1.055 11-11.5
Red = Only available in EMEABold = Not available in EMEA
pHLEX™Neutralizing additive
pHLEX neutralizing additive is a proprietary organoamine blend that raises pH and provides buffering effects to waterborne paints and coatings. It is designed as a functional drop-in replacement that is an economic alternative to other common amine-based neutralizers, but also offers a low-odor stabilizing alternative to ammonia, NaOH and other common bases.
pHLEX neutralizing additive also offers reduced VOC compared to other organoamine neutralizers and lower odor levels for in-plant handling benefits.
Benefits
• Effective pH neutralizer.
• Provides pH stability over time.
• Inhibits in-can corrosion.
• Helps prevent flash rusting.
• Lower odor for handling and manufacturing.
• Can reduce odor of waterborne paints.
• Can reduce demand of anionic dispersant.
Specialty chemicals
Performance Specialties Reference Guide 57
Performance Specialties ChartsThe following tables are cross-references of the products cited throughout the text and their uses in a wide variety of industrial applications and their fundamental functional properties.
The following table is a cross-reference of the products cited throughout the text and their uses in a wide variety of industrial applications.
Surfactants, Solvents and Intermediates Vinyl Monomers
Surf
adon
e™
wet
ting
agen
ts
Easy
-Wet
™ 2
0 w
ettin
g ag
ent
Dex
trol
™
phos
phat
e es
ter
surf
acta
nts
Stro
dex™
ph
osph
ate
este
r su
rfac
tant
s
V-Py
rol™
vi
nylp
yrro
lidon
e
V-Ca
p™ v
inyl
ca
prol
acta
m
Adhesives n n n n n
Advanced Ceramics
Batteries
Cables
Ceramics
Civil Engineering
Electronics n n
Emulsions n n
Explosives
Inks & Printing n n n n n n
Membranes
Metal Processing n n n n
Mineral Slurries n n
Mining
Paint Removers
Paper Coatings
Plastics n
Pulp & Paper
Refinery Additives n n
Rubber
Specialty Coatings n n n n n
Suspension Polymerization
n
Textiles & Leather
Tissues & Towels
Tobacco
Weldings
Woodcare
Surfactants, solvents and intermediates, vinyl monomers
Performance Specialties Reference Guide 59
Performance polymers
The following table is a cross-reference of the products cited throughout the text and their uses in a wide variety of industrial applications.
Performance Polymers Performance PolymersPV
P po
lym
ers
Dis
inte
x™ d
isin
tegr
ants
Po
lycl
ar™
po
lyvi
nylp
olyp
yrro
lidon
e Po
lycl
ar™
cro
spov
idon
e
Gan
ex™/
Ant
aron
™ p
olym
ers
PVP/
VA p
olym
ers
Pole
ctro
n™/A
ntar
a™
poly
mer
s
Gaf
quat
™ p
olym
ers
Styl
eze™
cop
olym
ers
Setle
ze™
cop
olym
ers
Ultr
aThi
x™ c
ross
poly
mer
Ra
piTh
ix™
pol
ymer
Gaffi
x™/C
opol
ymer
VC-
713
poly
mer
Aqu
aflex
™ c
opol
ymer
Sore
z™ c
opol
ymer
s
Rheo
Thix
™ th
icke
ning
age
nt
Aqu
aflow
™ rh
eolo
gy
mod
ifier
s
Gan
trez
™ a
nd I-
Rez™
co
poly
mer
s
Easy
Sper
se™
pol
ymer
ic
disp
ersa
nt ra
nges
Jayp
ol™
acr
ylat
es
Rapi
floc™
acr
ylat
es
Bond
wel
l™, B
lano
se™
, A
qual
on™
car
boxy
met
hyl
cellu
lose
Aqu
aVIS
™ p
olym
ers
Nat
roso
l™
hydr
oxye
thyl
cellu
lose
Aqu
alon
™ e
thyl
cel
lulo
se
Kluc
el™
hyd
roxy
prop
yl
cellu
lose
Culm
inal
™ m
ethy
lcel
lulo
se
deriv
ativ
es
Bene
cel™
met
hylc
ellu
lose
de
riva
tives
Gal
acta
sol™
der
ivat
ized
gua
r
Adhesives n n n n n n n n n n n n n n n n n
Advanced Ceramics n n n
Batteries n n
Cables n
Ceramics n n
Civil Engineering n n n
Electronics n n n n n n
Emulsions n n n
Explosives n n
Inks & Printing n n n n n n n n n n n n n n n n n n n
Membranes n n n n
Metal Processing n n n n n n
Mineral Slurries n n
Mining n n n n
Paint Removers n n
Paper Coatings n n n n
Plastics n n
Pulp & Paper n
Refinery Additives
Rubber
Specialty Coatings n n n n n n n n n n n n n n n n n n
Suspension Polymerization
n n n
Textiles & Leather n
Tissues & Towels n
Tobacco n
Weldings n
Woodcare
60 Performance Specialties Reference Guide
Performance Polymers Performance Polymers
PVP
poly
mer
s
Dis
inte
x™ d
isin
tegr
ants
Po
lycl
ar™
po
lyvi
nylp
olyp
yrro
lidon
e Po
lycl
ar™
cro
spov
idon
e
Gan
ex™/
Ant
aron
™ p
olym
ers
PVP/
VA p
olym
ers
Pole
ctro
n™/A
ntar
a™
poly
mer
s
Gaf
quat
™ p
olym
ers
Styl
eze™
cop
olym
ers
Setle
ze™
cop
olym
ers
Ultr
aThi
x™ c
ross
poly
mer
Ra
piTh
ix™
pol
ymer
Gaffi
x™/C
opol
ymer
VC-
713
poly
mer
Aqu
aflex
™ c
opol
ymer
Sore
z™ c
opol
ymer
s
Rheo
Thix
™ th
icke
ning
age
nt
Aqu
aflow
™ rh
eolo
gy
mod
ifier
s
Gan
trez
™ a
nd I-
Rez™
co
poly
mer
s
Easy
Sper
se™
pol
ymer
ic
disp
ersa
nt ra
nges
Jayp
ol™
acr
ylat
es
Rapi
floc™
acr
ylat
es
Bond
wel
l™, B
lano
se™
, A
qual
on™
car
boxy
met
hyl
cellu
lose
Aqu
aVIS
™ p
olym
ers
Nat
roso
l™
hydr
oxye
thyl
cellu
lose
Aqu
alon
™ e
thyl
cel
lulo
se
Kluc
el™
hyd
roxy
prop
yl
cellu
lose
Culm
inal
™ m
ethy
lcel
lulo
se
deriv
ativ
es
Bene
cel™
met
hylc
ellu
lose
de
riva
tives
Gal
acta
sol™
der
ivat
ized
gua
r
Adhesives n n n n n n n n n n n n n n n n n
Advanced Ceramics n n n
Batteries n n
Cables n
Ceramics n n
Civil Engineering n n n
Electronics n n n n n n
Emulsions n n n
Explosives n n
Inks & Printing n n n n n n n n n n n n n n n n n n n
Membranes n n n n
Metal Processing n n n n n n
Mineral Slurries n n
Mining n n n n
Paint Removers n n
Paper Coatings n n n n
Plastics n n
Pulp & Paper n
Refinery Additives
Rubber
Specialty Coatings n n n n n n n n n n n n n n n n n n
Suspension Polymerization
n n n
Textiles & Leather n
Tissues & Towels n
Tobacco n
Weldings n
Woodcare
Performance Specialties Reference Guide 61
Specialty chemicals
The following table is a cross-reference of the products cited throughout the text and their uses in a wide variety of industrial applications.
pHLE
X™
neut
raliz
ing
agen
ts
Esca
lol™
U
V fil
ters
Cera
phyl
™
emul
sifie
rs
Cera
synt
™
emul
sifie
rs
Mic
ropo
wde
r™
Iron
Iron
Pe
ntac
arbo
nyl
Dre
wpl
us™/
Adv
anta
ge™
de
foam
ers
Adhesives n
Advanced Ceramics
AgChem n
Batteries
Cables
Ceramics
Civil Engineering
Electronics
Emulsions n
Explosives
Inks & Printing n n n n
Membranes
Metal Processing n n n n
Mineral Slurries
Mining
Paint Removers
Paper Coatings n
Plastics n
Pulp & Paper n
Refinery Additives n
Rubber
Specialty Coatings n n n
Suspension Polymerization
Textiles & Leather n
Tissues & Towels
Tobacco
Weldings
Woodcare
62 Performance Specialties Reference Guide
pHLE
X™
neut
raliz
ing
agen
ts
Esca
lol™
U
V fil
ters
Cera
phyl
™
emul
sifie
rs
Cera
synt
™
emul
sifie
rs
Mic
ropo
wde
r™
Iron
Iron
Pe
ntac
arbo
nyl
Dre
wpl
us™/
Adv
anta
ge™
de
foam
ers
Adhesives n
Advanced Ceramics
AgChem n
Batteries
Cables
Ceramics
Civil Engineering
Electronics
Emulsions n
Explosives
Inks & Printing n n n n
Membranes
Metal Processing n n n n
Mineral Slurries
Mining
Paint Removers
Paper Coatings n
Plastics n
Pulp & Paper n
Refinery Additives n
Rubber
Specialty Coatings n n n
Suspension Polymerization
Textiles & Leather n
Tissues & Towels
Tobacco
Weldings
Woodcare
Not available in EMEA
Performance Specialties Reference Guide 63
Surfactants, solvents and intermediates, vinyl monomers
The following table is a cross-reference of the products cited throughout the text and their fundamental functional property(ies).
Surfactants, Solvents and Intermediates Vinyl Monomers
Surf
adon
e™
wet
ting
agen
ts
Cera
phyl
™
emul
sifie
rs
Cera
synt
™
emul
sifie
rs
Easy
-Wet
™ 2
0 w
ettin
g ag
ents
Mic
rofle
x™
mic
roem
ulsi
fier
rang
es
Dex
trol
™
phos
phat
e es
ter
surf
acta
nts
Stro
dex™
ph
osph
ate
este
r su
rfac
tant
s
V-Py
rol™
vi
nylp
yrro
lidon
e
V-Ca
p™ v
inyl
ca
prol
acta
m
Activity Inhibitor
Adhesive
Anti-Agglomerant
Anti-Soil Redeposition
Anti-Static
Binder
Bioadhesive
Catalyst
Chemical Intermediate n n
Cohesive
Complexes
Corrosion Inhibitor n n
Cross-linker
Crystal Inhibitor
Defoamer
Detergent n n n n n n n
Disintegrant
Dispersant n n n n
Dye Fixative
Dye Transfer Inhibitor
Electrical Conductor
Electrical Resistor
EMI Protector
Emulsifier n n n n n n n
Encapsulation
Film Former
Flexible Film Former
64 Performance Specialties Reference Guide
Surfactants, Solvents and Intermediates Vinyl Monomers
Surf
adon
e™
wet
ting
agen
ts
Cera
phyl
™
emul
sifie
rs
Cera
synt
™
emul
sifie
rs
Easy
-Wet
™ 2
0 w
ettin
g ag
ents
Mic
rofle
x™
mic
roem
ulsi
fier
rang
es
Dex
trol
™
phos
phat
e es
ter
surf
acta
nts
Stro
dex™
ph
osph
ate
este
r su
rfac
tant
s
V-Py
rol™
vi
nylp
yrro
lidon
e
V-Ca
p™ v
inyl
ca
prol
acta
m
Flocculant
Flow Controller
Fluid Loss Additive
Lubricant n n n n
Metal Sequestrant
Oil Solubility n n
Opacifier n
Plasticizer n n
Processing Aid
Release Agent
Rheology Modifier
Sizing Agent
Soil Release Agent
Solvent n n n n n
Stabilizer
Substantive
Surface Active n n n n n n n
Suspending Agent
Tack Modifier
Thermoplastic
Thickener
UV Absorber
UV Protector
Water Resistor
Water-Holding
Wax Inhibitor
Performance Specialties Reference Guide 65
Performance polymers
The following table is a cross-reference of the products cited throughout the text and their fundamental functional property(ies).
Performance Polymers Performance Polymers
PVP
poly
mer
s
Dis
inte
x™ d
isin
tegr
ants
Po
lycl
ar™
po
lyvi
nylp
olyp
yrro
lidon
e Po
lycl
ar™
cro
spov
idon
e
Gan
ex™/
Ant
aron
™
poly
mer
s
PVP/
VA p
olym
ers
Pole
ctro
n™/A
ntar
a™
poly
mer
s
Gaf
quat
™ p
olym
ers
Styl
eze™
cop
olym
ers
Acry
lidon
e™
Ultr
aThi
x™ c
ross
poly
mer
Ra
piTh
ix™
pol
ymer
Gaf
fix™/
Copo
lym
er V
C-71
3 po
lym
er
Aqu
afle
x™ c
opol
ymer
s
Aqu
asty
le™
cop
olym
ers
Sore
z™ c
opol
ymer
s
Rheo
Thix
™ th
icke
ning
ag
ents
Aqu
aflow
™ rh
eolo
gy
mod
ifier
s
Gan
trez
™ a
nd I-
Rez™
co
poly
mer
s
Easy
Sper
se™
pol
ymer
ic
disp
ersa
nt ra
nges
Jayp
ol™
acr
ylat
es
Rapi
floc™
acr
ylat
es
Bond
wel
l™, B
lano
se™
, A
qual
on™
car
boxy
met
hyl
cellu
lose
Nat
roso
l™
hydr
oxye
thyl
cellu
lose
Aqu
alon
™
ethy
l cel
lulo
se
Kluc
el™
hyd
roxy
prop
yl
cellu
lose
Culm
inal
™ m
ethy
lcel
lulo
se
deri
vativ
es
Bene
cel™
met
hylc
ellu
lose
de
riva
tives
Gal
acta
sol™
der
ivat
ized
gu
ar
Activity Inhibitor n n
Adhesive n n n n n n n n n n n n n n
Anti-Agglomerant n
Anti-Soil Redeposition n n n n n
Anti-Static n
Binder n n n n n n n
Bioadhesive n
Catalyst
Chemical Intermediate n
Cohesive n n n n n n n n n n n n n n n
Complexes n n n n
Corrosion Inhibitor n n
Cross-linker n n n n n n n n
Crystal Inhibitor n n n n
Defoamer
Detergent n n
Disintegrant n
Dispersant n n n n n n
Dye Fixative n n n
Dye Transfer Inhibitor n
Electrical Conductor
Electrical Resistor
EMI Protector
Emulsifier n
Encapsulation n
Film Former n n n n n n n n n n n n n n n n n n
Flexible Film Former n n n n n
66 Performance Specialties Reference Guide
Performance Polymers Performance Polymers
PVP
poly
mer
s
Dis
inte
x™ d
isin
tegr
ants
Po
lycl
ar™
po
lyvi
nylp
olyp
yrro
lidon
e Po
lycl
ar™
cro
spov
idon
e
Gan
ex™/
Ant
aron
™
poly
mer
s
PVP/
VA p
olym
ers
Pole
ctro
n™/A
ntar
a™
poly
mer
s
Gaf
quat
™ p
olym
ers
Styl
eze™
cop
olym
ers
Acry
lidon
e™
Ultr
aThi
x™ c
ross
poly
mer
Ra
piTh
ix™
pol
ymer
Gaf
fix™/
Copo
lym
er V
C-71
3 po
lym
er
Aqu
afle
x™ c
opol
ymer
s
Aqu
asty
le™
cop
olym
ers
Sore
z™ c
opol
ymer
s
Rheo
Thix
™ th
icke
ning
ag
ents
Aqu
aflow
™ rh
eolo
gy
mod
ifier
s
Gan
trez
™ a
nd I-
Rez™
co
poly
mer
s
Easy
Sper
se™
pol
ymer
ic
disp
ersa
nt ra
nges
Jayp
ol™
acr
ylat
es
Rapi
floc™
acr
ylat
es
Bond
wel
l™, B
lano
se™
, A
qual
on™
car
boxy
met
hyl
cellu
lose
Nat
roso
l™
hydr
oxye
thyl
cellu
lose
Aqu
alon
™
ethy
l cel
lulo
se
Kluc
el™
hyd
roxy
prop
yl
cellu
lose
Culm
inal
™ m
ethy
lcel
lulo
se
deri
vativ
es
Bene
cel™
met
hylc
ellu
lose
de
riva
tives
Gal
acta
sol™
der
ivat
ized
gu
ar
Activity Inhibitor n n
Adhesive n n n n n n n n n n n n n n
Anti-Agglomerant n
Anti-Soil Redeposition n n n n n
Anti-Static n
Binder n n n n n n n
Bioadhesive n
Catalyst
Chemical Intermediate n
Cohesive n n n n n n n n n n n n n n n
Complexes n n n n
Corrosion Inhibitor n n
Cross-linker n n n n n n n n
Crystal Inhibitor n n n n
Defoamer
Detergent n n
Disintegrant n
Dispersant n n n n n n
Dye Fixative n n n
Dye Transfer Inhibitor n
Electrical Conductor
Electrical Resistor
EMI Protector
Emulsifier n
Encapsulation n
Film Former n n n n n n n n n n n n n n n n n n
Flexible Film Former n n n n n
Performance Specialties Reference Guide 67
Performance polymers
The following table is a cross-reference of the products cited throughout the text and their fundamental functional property(ies).
Performance Polymers Performance Polymers
PVP
poly
mer
s
Dis
inte
x™ d
isin
tegr
ants
Po
lycl
ar™
po
lyvi
nylp
olyp
yrro
lidon
e Po
lycl
ar™
cro
spov
idon
e
Gan
ex™/
Ant
aron
™
poly
mer
s
PVP/
VA p
olym
ers
Pole
ctro
n™/A
ntar
a™
poly
mer
Gaf
quat
™ p
olym
ers
Styl
eze™
cop
olym
ers
Acry
lidon
e™
Ultr
aThi
x™ c
ross
poly
mer
Ra
piTh
ix™
pol
ymer
Gaf
fix™/
Copo
lym
er V
C-71
3 po
lym
er
Aqu
afle
x™ te
trap
olym
ers
Aqu
asty
le™
cop
olym
ers
Sore
z™ c
opol
ymer
s
Rheo
Thix
™ th
icke
ning
ag
ents
Aqu
aflow
™ rh
eolo
gy
mod
ifier
s
Gan
trez
™ a
nd I-
Rez™
co
poly
mer
s
Easy
Sper
se™
pol
ymer
ic
disp
ersa
nt ra
nges
Jayp
ol™
acr
ylat
es
Rapi
floc™
acr
ylat
es
Bond
wel
l™, B
lano
se™
, A
qual
on™
car
boxy
met
hyl
cellu
lose
Nat
roso
l™
hydr
oxye
thyl
cellu
lose
Aqu
alon
™
ethy
l cel
lulo
se
Kluc
el™
hyd
roxy
prop
yl
cellu
lose
Culm
inal
™ m
ethy
lcel
lulo
se
deri
vativ
es
Bene
cel™
met
hylc
ellu
lose
de
riva
tives
Gal
acta
sol™
der
ivat
ized
gu
ar
Flocculant n
Flow Controller n n n
Fluid Loss Additive n n n
Lubricant n n n n
Metal Sequestrant n
Oil Solubility n n
Opacifier n
Plasticizer
Processing Aid
Release Agent
Rheology Modifier n n n n n n n n n n n n n n n n
Sizing Agent
Soil Release Agent n n
Solvent n
Stabilizer n n n
Substantive n n n n n
Surface Active n n n n
Suspending Agent n n n n n n n
Tack Modifier n n
Thermoplastic n n n
Thickener n n n n n n n n n n n n n
UV Absorber
UV Protector
Water Resistor n n n n
Water-Holding n
Wax Inhibitor n
68 Performance Specialties Reference Guide
Performance Polymers Performance Polymers
PVP
poly
mer
s
Dis
inte
x™ d
isin
tegr
ants
Po
lycl
ar™
po
lyvi
nylp
olyp
yrro
lidon
e Po
lycl
ar™
cro
spov
idon
e
Gan
ex™/
Ant
aron
™
poly
mer
s
PVP/
VA p
olym
ers
Pole
ctro
n™/A
ntar
a™
poly
mer
Gaf
quat
™ p
olym
ers
Styl
eze™
cop
olym
ers
Acry
lidon
e™
Ultr
aThi
x™ c
ross
poly
mer
Ra
piTh
ix™
pol
ymer
Gaf
fix™/
Copo
lym
er V
C-71
3 po
lym
er
Aqu
afle
x™ te
trap
olym
ers
Aqu
asty
le™
cop
olym
ers
Sore
z™ c
opol
ymer
s
Rheo
Thix
™ th
icke
ning
ag
ents
Aqu
aflow
™ rh
eolo
gy
mod
ifier
s
Gan
trez
™ a
nd I-
Rez™
co
poly
mer
s
Easy
Sper
se™
pol
ymer
ic
disp
ersa
nt ra
nges
Jayp
ol™
acr
ylat
es
Rapi
floc™
acr
ylat
es
Bond
wel
l™, B
lano
se™
, A
qual
on™
car
boxy
met
hyl
cellu
lose
Nat
roso
l™
hydr
oxye
thyl
cellu
lose
Aqu
alon
™
ethy
l cel
lulo
se
Kluc
el™
hyd
roxy
prop
yl
cellu
lose
Culm
inal
™ m
ethy
lcel
lulo
se
deri
vativ
es
Bene
cel™
met
hylc
ellu
lose
de
riva
tives
Gal
acta
sol™
der
ivat
ized
gu
ar
Flocculant n
Flow Controller n n n
Fluid Loss Additive n n n
Lubricant n n n n
Metal Sequestrant n
Oil Solubility n n
Opacifier n
Plasticizer
Processing Aid
Release Agent
Rheology Modifier n n n n n n n n n n n n n n n n
Sizing Agent
Soil Release Agent n n
Solvent n
Stabilizer n n n
Substantive n n n n n
Surface Active n n n n
Suspending Agent n n n n n n n
Tack Modifier n n
Thermoplastic n n n
Thickener n n n n n n n n n n n n n
UV Absorber
UV Protector
Water Resistor n n n n
Water-Holding n
Wax Inhibitor n
Performance Specialties Reference Guide 69
Specialty Chemicals
Am
berg
um™
w
ater
-sol
uble
po
lym
ers
pHLE
X™
neut
raliz
ing
agen
ts
Esca
lol™
U
V fil
ters
Mic
ropo
wde
r™
Iron
Iron
Pe
ntac
arbo
nyl
Dre
wpl
us™/
Adv
anta
ge™
de
foam
ers
Activity Inhibitor n n
Adhesive
Anti-Agglomerant
Anti-Soil Redeposition
Anti-Static
Binder
Bioadhesive
Catalyst n n
Chemical Intermediate n
Cohesive
Complexes
Corrosion Inhibitor n
Cross-linker
Crystal Inhibitor
Defoamer n
Detergent
Disintegrant
Dispersant n
Dye Fixative
Dye Transfer Inhibitor
Electrical Conductor
Electrical Resistor n
EMI Protector n
Emulsifier n
Encapsulation
Film Former n
Flexible Film Former
Specialty chemicals
The following table is a cross-reference of the products cited throughout the text and their fundamental functional property(ies).
Not available in EMEA
70 Performance Specialties Reference Guide
Specialty Chemicals
Am
berg
um™
w
ater
-sol
uble
po
lym
ers
pHLE
X™
neut
raliz
ing
agen
ts
Esca
lol™
U
V fil
ters
Mic
ropo
wde
r™
Iron
Iron
Pe
ntac
arbo
nyl
Dre
wpl
us™/
Adv
anta
ge™
de
foam
ers
Flocculant
Flow Controller
Fluid Loss Additive
Lubricant n
Metal Sequestrant
Oil Solubility n
Opacifier
Plasticizer
Preservative
Processing Aid
Release Agent
Rheology Modifier n
Sizing Agent
Soil Release Agent
Solvent
Stabilizer n
Substantive
Surface Active n n
Suspending Agent
Tack Modifier
Thermoplastic
Thickener n
UV Absorber n
UV Protector n
Water Resistor
Water-Holding
Wax Inhibitor
Not available in EMEA
Performance Specialties Reference Guide 71
Performance and Industrial ChemicalsA broad portfolio backed by the best quality and technical servicesAshland’s portfolio of performance and industrial chemicals is one of the broadest in the specialties
segment, enabling us to take a market-leading position in many categories. From printing to oilfield to
automotive, these products are widely distributed to manufacturers around the world to enhance product
functionality, reduce costs and improve processing and manufacturing. Additionally, Ashland provides
customized chemistry to formulators with especially challenging performance requirements. This white-
glove approach is further reflected in our extensive global network of technical service facilities in North
America, Europe, Middle East and Asia. For more information about our entire line of offerings, visit our
corporate site at ashland.com.
For more information, contact us at: specialtiessolutions@ashland.com
® Registered trademark, Ashland or its subsidiaries, registered in various countries™ Trademark, Ashland or its subsidiaries, registered in various countries© 2012-2016, AshlandPC-11578.3
Global Headquarters
Ashland Inc.50 East RiverCenter Blvd.Covington, KY 41012 USATel: +1 859 815 3333
Ashland Specialty Ingredients8145 Blazer DriveWilmington, DE 19808 USATel: +1 877 546 2782
Regional Sales Offices
North AmericaBridgewater, NJ USATel: +1 877 546 2782specialtiessolutionsSANA@ashland.com
Latin AmericaSão Paulo, BrazilTel: +55 11 3649 0455Fax: +55 11 3649 0450Mexico City, MexicoTel: +52 55 5276 6110Fax: +52 55 2614 2939Bogota, ColombiaTel: +57 1 636 0618Fax: +57 1 691 8540Buenos Aires, ArgentinaTel: +54 11 4314 8971Fax: +54 11 4314 8976specialtiessolutionsSANA@ashland.com
Asia PacificSingaporeTel: +65 6775 5366Fax: +65 6775 5433Mumbai, IndiaTel: +91 22 61484646Fax: +91 22 61484639Shanghai, P.R. ChinaTel: +86 21 2402 4888Fax: +86 21 2402 4850specialtiessolutionsAP@ashland.com
EuropeSchaffhausen, SwitzerlandTel: +41 52 560 5500specialtiesEMEA@ashland.com
Middle East and AfricaDubai, U.A.E.Tel: +971 4 381 8515specialtiesEMEA@ashland.com
ashland.com
The information contained in this brochure and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performed necessary technical investigations, tests and evaluations of the products and their uses. Certain end uses of these products may be regulated pursuant to rules or regulations governing medical devices, drug uses, or pesticidal or antimicrobial uses. It is the end user’s responsibility to determine the applicability of such regulations to its products.
All statements, information, and data presented herein are believed to be accurate and reliable, but are not to be taken as a guarantee of fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility. No freedom to use any patent owned by Ashland, its subsidiaries, or its suppliers is to be inferred.