Post on 26-May-2018
transcript
112
REFERENCES
Abbott, P. (1987) Co-extrusion recent developments using cooking extruder. Cereal Foods
World, 32: 816-819.
Abdel-Aal, E.S.M., Sosulski, F.W., Adel, A., Shehata, Y., Youssef, M.M. and Bave, J.L.
(1992) Effect of extrusion cooking on the physical and functional properties of wheat,
rice and faba bean blends. LWT- Food Science and Technology, 25: 21-25.
Agbisit, R., Alavi, S., Cheng, E.Z., Herald, T., and Trater, A. (2007) Relationships between
microstructure and mechanical properties of cellular corn starch extrudates. Journal of
Texture Studies, 38(2): 709-719.
Aguilera, J.M. (2006) Structure-property relationships in low moisture products. In: P. Buera,
P. Milford, H. Corti and J. Welti-Chanes, Editors, Water properties of food,
pharmaceutical and biological materials, CRC Press, Boca Raton,
Aguilera, J.M. (2005) Why food microstructure. Journal of Food Engineering, 67: 3–11.
Aguilera, J.M. and Gloria, H. (1997) Determination of oil fried potato products by differential
scanning calorimetry. Journal of Agricultural and Food Chemistry, 45: 781-785.
Altan, A., McCarthy, K.L. and Maskan, M. (2008) Twin-screw extrusion of barley–grape
pomace blends: Extrudate characteristics and determination of optimum processing
conditions. Journal of Food Engineering, 89:24-32.
AOCS, (2004) Official methods of analysis, 5th edn. American oilchemist’s society
Champaign, Illinois, Washington.
113
Babin, P., Della, V., Dendievel, G.R., Lourdin, D. and Salvo, L.(2007) X-ray tomography
study of the cellular structure of extruded starches and its relations with expansion
phenomenon and foam mechanical properties. Carbohydrate Polymers, 68: 329-340.
Badding. S., Huff, H.E. and Hsieh, E. (1995) Processing Parameters and Product Properties
of Extruded Beef with Nonmeat Cereal Binders. LWT- Food Science and Technology,
28: 386-394.
Baixauli, R. andSanz, T. (2007) Influence of the dosing process on the rheological and micro
structural properties of a bakery product. Food Hydrocolloids, 21(2): 230-236.
Bakhru, H. K. (1993) Foods that Heal-The natural way to good health. Orient paper Backs,
Delhi.
Balunkeswar, N., Jose, D., Berrios, J., Joseph, R.P. and Tang, J. (2011) Effect of extrusion
on the antioxidant capacity and color attributes of expanded extrudates prepared from
purple potato and yellow pea flour mixes. Journal of Food Science, 76(6): 873-884
Banerjee, S. and Chakraborty. (2000) Analyzed the shear and thermal effect on extrusion
energy, pressure requirement and viscosity of dough. Journal of Food Science and
Technology, 37(2): 184-187.
Barret, A.H. and Ross (1992) Correlation of extrudate infusibility with bulk properties using
image analysis. Journal of Food Science, 55: 1378-1382.
Barrett, A. H. and Peleg, M. (1992) Extrudate cell structure-texture relationships. Journal of
Food Science, 57(5): 1253–1257.
Bawa, A.S., and Sian, S.P.S. (1987) Effect of method of preservation on the storage quality
of carrot juice. Indian Food Packer, 41(1): 42–46.
114
Beirendonck, K.V. (2001) Batter and coating systems. Food Ingredients and Analysis, 23(1):
26-28.
Bhattacharya, S. and Praksah, M. (1994) Extrusion of blends of rice and chickpea flours: a
response surface analysis. Journal of Food Engineering, 21(3): 315-330.
Bhattacharyya, P., Ghosh, U., Gangopadhyay, H. and Raychaudhuri U. (2006) Physico-
chemical characteristics of extruded snacks prepared from rice (Oryzas sativa L), corn
(Zea mays L) and taro Colocasia esculenta (L) Schott by twin-screw extrusion.
Journal of Scientific and Industrial Research, 65(2):165-168.
Blumenthal, M.M. and Stier, R.F. (1991) Optimization of deep-fat frying operations. Trends
in Food Science and Technology, 2(6): 144-148.
Bockel, V. (1996) Statistical aspects of kinetic modelling for food science problem. Journal
of Food Science, 61(3): 477-486.
Bou, R., Navas, J.A., Tres, A., Codony, R. and Guardiola, F. (2012) Quality assessment of
frying fats and fried snacks during continuous deep fat frying at different large scale
producers. Food Control, 27(1):254-267.
Bouchon, P. and Pyle,L. (2004) Study oil absorption in restructured potato chips. Journal of
Food Science, 69: 115-122.
Bouchon, P., Aguilera, J.M. and Pyle, D.L. (2003) Structure oil-absorption relationships
during deep-fat frying. Journal of Food Science, 68(9): 2711-2712.
Bouchon, P., Hollins, P., Pearson, M., Pyle, D.L. and Tobin, M.J. (2001) Oil distribution in
fried potatoes monitored by infrared microspectroscopy. Journal of Food Science, 66:
918- 923.
115
Brennan, C., Brennan, M., Derbyshire, E. and Tiwari,B. K. (2011) Effects of extrusion on the
polyphenols, vitamins and antioxidant activity of foods. Trends in Food Science and
Technology, 22: 570–575.
Brian, J.L., Brian, E.F. and Kevin, M.K. (2005) Quality comparison of french fry style
potatoes produced by oven heating, immersion frying and controlled dynamic radiant
heating. Journal of Food Processing and Preservation, 28(6): 460-472.
Buchanan, R.A. (1975) Low cost infant foods in Asia. Food Technology in Australia, 27(11):
493-494.
Burdurlu, H.S., Koca, N. and Karadeniz, F. (2006) Degradation of vitamin C in citrus juice
concentrates during storage. Journal of Food Engineering, 74: 211–216.
Camire, M.E., Camire, A. and Krumhar, K. (1990) Chemical and nutritional changes in
foods during extrusion. Critical Reviews in Food Science Nutrition, 30: 35-45.
Carabasa, G. M. and Ibarz-Ribas, A. (2000) Kinetics of colour development in aqueous
glucose systems at high temperatures. Journal of Food Engineering, 44: 181-189
Cavadaa, E., PastorS.R., Drago, R., González, J., Rocío, J., Julio, P., Manuel, A. and
Vioquea, J.(2011) Effects of the addition of wild legumes (Lathyrus annuus and
Lathyrus clymenum) on the physical and nutritional properties of extruded products
based on whole corn and brown rice. Food Chemistry, 128: 961–967.
Chandrasekhar, P.R.and Chattopadhyay, P.K. (1990) Studies on microstructural changes of
parboiled and puffed rice. Journal of Food Processing and Preservation, 14: 27-37.
116
Chantaro, P., Devahastin, S. and Chiewchan, N. (2008) Production of antioxidant high
dietary fibre powder from carrot peels. LWT Food Science Technology, 41: 1987-
1994.
Chanvrier, H., Appelquist, I. A. M, Bird,A.R., Gilbert, E., Htom, A.,Li, Z., Liliford,P.I.,
Lopez-Rbubio, A., Msell, M.K. and Topping, D.L.(2007) Processing of novel
elevated amylase wheats; Functional properties and starch digestibility of extruded
products. Journal of Agricultural Food Chemistry, 55: 10248-10257.
Chau, C. F., Chen, C. H., Lee, M. H., Chau, C. F., Chen, C. H. and Lee, M. H. (2004)
Comparison of the characteristics, functional properties, and in vitro hypoglycemic
effects of various carrot insoluble fiber-rich fractions. LWT-Food Science and
Technology, 37(2): 155-160.
Chauhan, G. S. and Bains, G. S. (1988) Effect of some extruder variables on physico-
chemical properties of extruded rice-legume blends. Food Chemistry, 27(3): 213-224.
Chawangkul and Onanong, N. (2001) Microstructural changes in instant noodles during
production via triple staining and confocal laser scanning microscopy and scanning
electron microscopy. Journal of Food Processing and Preservation, 35(3): 311-317
Chinnaswamy, R., Hanna, M. A. and Zobel, H. F. (1989) Microstructural, physicochemical
and macromolecular changes in extrusion-cooked and retrograded corn starch. Cereal
Food World, 34 (5): 415-422.
Cho, K.Y. and Rizvi, S. S. H. (2009) New generation of healthy snack food by supercritical
fluid extrusion. Journal of Food Processing and Preservation, 34(2): 192-218.
Choi, I.D. and Philips, R.D. (2004) Cellular structure of peanut based extruded snack
products using SEM. Journal of Texture studies, 35: 353-370.
117
Cummings, D.B., Stanley, J.M. and Deman, J.M. (1972) Textural properties and
ultrastructure of an extruded soybean product. Journal of Canadian Institute of Food
science and Technology, 5: 124–128.
Ding, Q., Ainsworth, P., Tucker, G. and Marson, H. (2005) The effect of extrusion conditions
on the physicochemical properties and sensory characteristics of rice-based expanded
snacks. Journal of Food Engineering, 66(3):283-289.
Ding, Q.B., Ainsworth, P., Plonkell, A., Tucker, G. and Marson, H. (2006) The effect of
extrusion conditions on the functional and physical properties of wheat based
expanded snacks. Journal of Food Engineering, 73: 142-148.
Dobraszczyk, B.J., Ainsworth, P., Ibanoglu, S. and Bouchon, P. (2006) Baking, Extrusion
and Frying. In J.G. Brennan (Ed.), Food Processing Handbook, John Wiley and Sons,
USA.
Drake, B. (2006) Food crushing sounds an introductory study. Journal of Food Science,
28(2): 233-241
Dueik, V., Robert, P. and Bouchon, P. (2010) Vacuum frying reduces oil uptake and
improves the quality parameters of carrot crisps. Food Chemistry, 119(3): 1143–1149.
Dueik, V. and Bouchon, P. (2011) Vacuum frying as a route to produce novel snacks with
desired according to quality attributes according to new health trends. Journal of
Food Science, 76: 188-195.
Dueik, V., Moreno, M. and Bouchon, C. P. (2012) Microstructural approach to understand
oil absorption during vacuum and atmospheric frying. Journal of Food Engineering,
111(3): 528-536.
118
Duizer, L. (2001) A review of acoustic research for studying the sensory perception of crisp,
crunchy and crackly textures. Trends in Food Science and Technology, 12: 17–24.
Elisa, L.K., Lewis, K., Hulya, D. and Alavi, S. (2012) Matrix transformation in fiber-added
extruded products Impact of different hydration regimens on texture, microstructure
and digestibility. Journal of Food Engineering, (108): 171–182.
FAO, (2009) Statistics, Food and Agriculture Organisation, Rome,
http://faostat.fao.org/site/339/default.aspx.
FAO, (2011) Statistics, Food and Agriculture Organisation, Rome
http://faostat.fao.org/site/339/default.aspx L.
Faris, D.G. and Singh, U. (1990) Nutrition and Products. In: Nene, Y.L., S.D. Hall and V.K.
Sheila, (Eds.), The Pigeon Pea C.A.B. International Wallingford, Qxan, UK and
International Crops Research Institute for the Semi-Arid Tropics (ICRISAT),
Patancheru, India, pp: 401-433.
Farkas, B.E., Singh, R.P. andRumsey, T.R. (1996) Modelling heat and mass transfer in
immersion frying. Part I: model development. Journal of Food Engineering, 29: 211–
226.
Filipini, M. (2001) Preparation, application and evaluation of functional food additives from
organic residues using carrot pomace and wheat bread as the model system. Bulletin,
Institute for Food Technology, University of Bonn, Bonn.
Fillion, L. and Henry, C.J.K. (1998) Nutrient losses and gains during frying: A review.
International. Journal of Food Sciences and Nutrition, 49(2): 157–168
119
Fontannaz, P., Kilinc, T. and Heudi, O. (2006) HPLC –UV determination of total vitamin C
in a wide range of fortified food products. Food Chemistry, 24: 626–631
Gamble, M.H., Rice, P. and Selman, J.D. (1987). Relationship between oil uptake and
moisture loss during frying of potato slices. International Journal of Food Science
and Technology, 22: 233–241.
Gao, X. and Tan, J. (1996) Analysis of expanded-food texture by image processing. Part II.
Mechanical properties. Journal of Food Process Engineering, 19(4): 445–456
Garayo, J. and Moreira, R. (2002) Vacuum frying of potato chips. Journal of Food
Engineering, 55: 181–191.
Gillespie Brothers Pvt. Limited. (1971)Australian Patent No. 413774.
Grewal, K.S., and Jain, S.C. (1982) Physico-chemical characteristics of carrot juice
beverage. Indian Food Packer, 36(5): 44–47.
Grigelmo, M.N. and Martin-Belloso, O. (1999) Comparison of dietary fibre from by-products
of processing fruits and greens and from cereals. LWT – Food Science and
Technology, 32: 503–508.
Gu, L., House, S.E., Rooney, L.W. and Prior, R.L. (2008) Sorghum extrusion increases
bioavailability of catechins in weanling pigs. Journal of Agricultural Food Chemistry,
56: 1283-1288.
Guha, M., Syed,Z.A. and Bhattacharya, S. (2003) Screening of variables for extrusion of rice
flour employing a Plackett-Burman design. Journal of Food Engineering, 57(2): 135-
144.
120
Gupta, (2003) Mathematical modelling of thin layer solar drying kheer mix. Journal of Food
Science and Technology, 40: 310-312.
Gwiazada, S., Noguchi, A. and Saio, K. (1987) Microstructural studies of texturized
vegetable protein products: Effects of oil addition and transformation of raw materials
in various sections of twin-screw extruder. Food Microstructure, 6(1): 57–61.
Harri, P.L., Cuppet, S.L. and Lee, K.W. (1988) A SEM study of maize gluten meal and soy
extrudates. Cereal Chemistry, 65(3): 228-232.
Hubbard, L.J. and Farkas, B.E. (2000) Influence of oil temperature on convective heat
transfer during immersion frying. Journal of Food Processing and Preservation, 24(2):
143–162.
Iabnoglu, I., Ainsworth, P., Ozer, E.A.and Plunkett, A. (2006) Physical and sensory
evaluation of a nutritionally balanced gluten-free extruded snack. Journal of Food
Engineering 75: 469-472.
Ilker, R. and Szczesniak, A. (1990) Structural and chemical base for texture of plant food
stuffs. Journal of Texture Studies, 21: 1–36.
Jackman, R.L. and Stanley, D.W. (1995) Perspectives in the textural evaluation of plant
foods. Trends in Food Science and Technology, 6: 187-194.
Jean, I.J., Work, R., Camere, M.E., Briggs, J., Barrett, A.H. and Bushway, A.A. (1996)
Selected properties of extruded potato and chicken meat. Journal of Food Science,
61: 783-789.
Jian, K.L., Brian, P.M., Dougherty, P. and Mary, E.C. (2011) Control of lipid oxidation in
extruded salmon jerky snacks. Journal of Food Science 76 (1): 8–13.
121
Jin, Z., Hsiehl, F. and Huff, H. E. (1995) Effects of soy fiber, salt, sugar and screw speed on
physical properties and microstructure of corn meal extrudate. Journal of Cereal
Science, 22(2): 185-194.
Kadan, R.S., Bryant, R. J. and Pepperman, A.B. (2003) Functional properties of extruded
rice flours. Journal of Food Science, 68: 1669-1672.
Kalra, C.L., Kulkarni, S.G. andBerry, S.K. (1987) The carrot (Daucus carota L.) – a most
popular root vegetable. Indian Food Packer, 46–73.
Kaur,S., Sarkar B.C., Sharma H. K. and Singh, C. (2009) Response surface optimization of
conditions for the clarification of guava fruit juice using commercial enzyme.Journal
of Food Process Engineering, 34(4): 1298-1398
Khare, R.N., Krishnamurthy, K.and Pingle, S. V. (1966) Milling losses of food grains –
studies on losses of pigeon-pea during milling. Bull Grain Technology, 4, 125.
Kim, C.H., Maga, J.A.,and Martin, J.T. (1989) Properties of extruded dried distiller grains
and flour blends. Journal of Food Processing and Preservation, 13(3): 219-231.
Kokini J.L., Chang C. and Lei L.(1992) The role of rheological properties on extrudate
expansion In:Kokini, J., Ho, C. and Karwe, M. (eds), Food Extrusion science and
Technology. Marcel Dekker, New York, PP631-653.
Kong, J., Perkins, L.B., Dougherty, M.P. and Camire, M.E. (2011) Control of lipid oxidation
in extruded salmon jerky Snacks. Journal of Food Science, 76: 8–13.
Kumar, N., Sarkar, B.C. and Sharma, H.K. (2010b) Development and characterization of
extruded product using carrot pomace and rice flour. International Journal of Food
Engineering, 6: 1-24.
122
Kumar, N., Sarkar, B.C. and Sharma, H.K. (2011) Effect of air velocity on kinetics of thin
layer carrot pomace drying. Food Science and Technology International, 17:459-469.
Kumar, N., Sarkar, B.C. and Sharma, H.K. (2012) Mathematical modelling of thin layer hot
air drying of carrot pomace. Journal of Food Science and Technology, 49: 33-41.
Kumar, N., Sarkar,B. and Sharma,H.K. (2010) Development and characterization of
extruded product of carrot pomace, rice flour and pulse powder. African Journal of
Food Science, 4(11): 703-717.
Kumar, N., Sarkar, B.C. and Sharma, H.K. (2012) Colour kinetics and storage characteristics
of carrot, pulse and rice by-product based extrudates. British Food Journal, 114(9):
1279-1296.
Kumari, S. and Grewal, R.B. (2007) Nutritional evaluation and utilization of carrot pomace
for preparation of high fiber biscuits. Journal of Food Science and Technology, 44:
56–58.
Kurien, P.P. and Parpia, H.A.B. (1968) Pulse milling in India. I. Processing and milling of
tur (Cajanus cajan Linn.). Journal of Food Science and Technology, 5: 203-207.
Kyi, H., Mruthunjaya, Khan, N.A., Rupasena, L. and Bottema, J.W.T. (1997)Market
Prospects for Pulses in South Asia: International and Domestic Trade. Working Paper
27, The CGPRT Centre, Bogor, Indonesia, 101p.
Lasekan, O.O., Lasekan, W., Idowu, M. A. and Ojo, O. A.(1996) Effect of extrusion cooking
on the nutritional value, storage stability and sensory characteristics of a maize-based
snack food. Journal of Cereal Science, 24: 79-85.
123
Lazou, A. and Krokida, M. (2010) Structural and textural characterization of corn-lentil
extruded snacks. Journal of Food Engineering, 100: 392–408.
Lee, C. and Han, O. (1997) Optimization of extrusion process of rice-ISP-file fish mixture by
response surface technology. Food and Biotechnology, 6(2): 97-103.
Liang, Y., Hosahalli, S.R.and Joyce, B. (2013) Protein rich extruded products prepared from
soy protein isolate-corn flour blends. LWT - Food Science and Technology, (50): 279–
289.
Lobato, L., Anibal, D., Lazaretti, M.M. and Grossmann, M.V.E. (2011) Extruded puffed
functional ingredient with oat bran and soy flour. LWT - Food Science and
Technology, 44: 933-939.
Lopez, R.A., Morell, M.K. and Topping, D.L. (2007) Processing of novel elevated amylose
wheats: Functional properties and starch digestibility of extruded products. Journal of
Agricultural and Food Chemistry, 55(25): 10248-10257.
Luyten, H., Plijter, J.J. and Van-Vliet, T. (2004) Crispy/crunchy crusts of cellular solid foods.
Journal of Texture Studies, 35: 445-492.
Maga, J.A. and Kim, C.H. (1989) Co-extrusion of rice flour with dried fruits and fruit juice
concentrates. LWT- Food Science and Technology, 22(4): 182-187.
Manjunatha, S.S., Kumar, M. and Gupta, D.K. (2003) Development and evaluation of carrot
kheer mix. Journal Food Science& Technology, (40): 310-312.
Manuel, M.S. and Sereno, A.M. (1999) The kinetics of browning measured during the
storage of onion and strawberry. International Journal of Food Science and
Technology, 34: 343–349.
124
Mariscal, M. and Bouchon, P. (2008) Comparison between atmospheric and vacuum frying
of apple slices. Food Chemistry, 107(4): 1561–1569.
Martina C., van Dalen, G., Meinders, M., Don, A., Hamer, R. and Vliet, T. (2010) Bread
crispness and morphology can be controlled by proving conditions. Food Research
International,43: 207-217.
Martína, C. and Vandeventer, H. (2011) Deep-fat fried battered snacks prepared using super-
heated steam (SHS): Crispness and low oil content. Food Research International 44:
442–448.
Mckee, L.H. and Latner, T.A. (2000) Underutilized sources of dietary fiber. Foods for
Human Nutrition, 55: 285-304.
Medina, W. T., Llera, A. A., Condori, J. L. and Aguilera, J. M. (2011) Physical properties
and microstructural changes during soaking of individual corn and quinoa breakfast
flakes. Journal of Food Science, 76(3): 254-265.
Mendonca, S., Grossmann, M.V.E. and Verhe, R. (2000) Corn bran as a fiber source in
expanded snacks. LWT-Food Science and Technology, 33(1): 2–8.
Meng, X., Threinen, D., Hansen, M. and Driedger, D. (2010) Effects of extrusion conditions
on system parameters and physical properties of a chickpea flour based snack. Food
Research International, 43(2): 650-658.
Mesa, N.J.E., Alsvi, S., Singh, N., Shi, Y.C., Dogan, H. and Sang, Y. (2009) Soy protein
fortified expanded extrudates using normal corn starch. Journal of Food Engineering,
90: 262-270.
125
Meyers, M. A. and Conklin, J. R. (1990) Method of inhibiting oil adsorption in coated fried
foods using hydroxypropyl methyl cellulose. US patent 4,900,573.
Ming, C.L., Shieh, T.C. and Chiang, W. (1993) Factors affecting starch degradation of rice
extruded by a twin-screw extruder. Journal of the Chinese Agricultural Chemical
Society, 31(4): 497-505.
Moraru, C.I. and Kokini, J.L. (2003) Nucleation and expansion during extrusion and
microwave heating of cereal foods. Comprehensive Reviews in Food Science and
Food Safety, 2: 120-138.
Moreira, R.G., Castell, M.E. and Barrufet, M.A. (1999) Deep-fat frying: fundamentals and
applications. Aspen Publishers, Gaithensburg, MA, 6(98): 179-202.
Moreira, R.G., Sun, X. and Chen, Y. (1997) Factors affecting oil uptake in tortilla chips in
deep-fat frying. Journal of Food Engineering, 31: 485–498.
Moreno, M.C., Brown, C.A. and Bouchon, P. (2010) Effect of food surface roughness on oil
uptake of deep-fat fried food. Journal of Food Engineering, 101: 179-186.
Mouquet, C., Salvignol, B., Van-Hoan, N., Monvois, J. and Treche. S. (2003) Ability of a
'very low-cost extruder' to produce instant infant flours at a small scale in Vietnam.
Food Chemistry, 82(2): 249-255.
Moyano, P. and Pedreschi, F. (2006) Kinetics of oil uptake during frying of potato slices:
effect of pre-treatments. LWT-Food Science and Technology, 39: 285–291.
Mueses, C., Deleon, L., Matute, J. and Bressani, R. (1993) Production of flours processed
with pigeon pea grains. Archives Latinoamericanos De Nutrition, 43(1): 33–40.
126
Mujumdar, A. S. and Devahastin, S. (2000) Fundamental principles of drying. In:
Devahastin, S (eds) Mujumdar’s practical guide to industrial drying. Exergex Vorp,
Montreal, pp 1–22.
Nath, A., Chattopadhyay, P. K. and Majumdar, G.C. (2007) High temperature short time air
puffed ready-to-eat potato snacks process parameter optimization. Journal of Food
Engineering, 80(3): 770-780.
Nath, A. and Chattopadhyay, P.K. (2008) Effect of process parameters and soy flour
concentration on quality attributes and microstructural changes in ready-to-eat potato–
soy snack using high-temperature short time air puffing. LWT - Food Science and
Technology 41(4): 707–715.
Nawirska, A. and Kwaśniewska, M. (2005) Dietary fibre fractions from fruit and vegetable
processing waste. Food Chemistry, 91: 221-225.
Nayak, B., Berrios, J. and Powers, J. (2011) Effect of extrusion on the antioxidant capacity
and color attributes of expanded extrudates prepared from purple potato and yellow
pea flour mixes. Journal of Food Science, 76(6): 74-83.
Negi, P.S. and Roy,S.K. (2001) Effect of drying under different processing and preservation
conditions on quality of green leaves during long methods, World. Journal of
Agricultural Sciences, 6(6): 639-643.
Negi,P.S. and Roy, S.K. (2001a) The effect of blanching on quality attributes of dehydrated
carrots during long term storage. European Food Research Technology, 212: 445–
448.
127
Ng, A., Lecain, S., Parker, M. L., Smith, A. C. and Waldron, K.W. (1999) Modification of
cell wall polymers of onion waste and effect of extrusion-cooking on cell wall
material of outer fleshy tissue. Carbohydrate Polymers, 39: 341–349.
Ng, S.C., Anderson, A., Coker, J. and Ondrus, M. (2007) Characterization of lipid oxidation
products in quinoa (Chenopodium quinoa). Food Chemistry, 101: 185–192.
Norajit, K.and Ryu,G.H.( 2011) Effects of the addition of hemp powder on the
physicochemical properties and energy bar qualities of extruded rice. Food Chemistry,
123(9): 1919–1925.
Nuria, G.M., Albert I.R. and Olga, M.B. (1999) Low properties of orange dietary fiber
suspensions. Journal of Texture Studies, 30(3): 245–257.
Oliveira, J.C., Pereira. P.M. and Oliveira, F.A. (1994) The role of transport phenomena. In
R.P. Singh, and F.A. Oliveira (Eds.), Minimal processing of foods and process
optimization. CRC Press (21): 257–266, Boca Raton, USA.
Oroszvari, B.K., Bayod, E., Sjoholm, I. and Tornberg, E. (2005) The mechanisms controlling
heat and mass transfer on frying of beef burgers. Part 2: The influence of the pan
temperature and patty diameter. Journal of Food Engineering, 71: 18-27.
Orr, D. (1984) The role of twin extrusion cooking in the production of breakfast cereals.
Institution of Chemical Engineers Symposium Series, 84: 61-66.
128
Orset, S., Leach, G.C., Morais, R. and Young, A.J. (1999) Spray-drying of the microalga
Dunaliella salination effects on β-carotene content and isomer composition.Journal
of Agricultural Food Chemistry, 47(11): 4782-90.
Oshawa,K., Chinen, C, Takanami, S. and Kuribayashi, K. (1995) Studies on effective
utilization of carrot pomace. II. Effective utilization to cake, dressings and
pickles. International Journal of Food Science Technology, 23: 15–18.
Ozkoc, O.S., Summu,G. and Sahin, S. (2009) The effect of gums on macro and
microstructure of breads baked in different ovens. Food Hydrocolloids, 23(8): 2182–
2189.
Pansawat, N., Jangchud, K., Jangchud, A., Wuttijumnong, P., Saalia, F.K., Eitenmiller, R.R.
and Phillips, R.D. (2008) Effects of extrusion conditions on secondary extrusion
variables and physical properties of fish, rice-based snacks. LWT-Food Science and
Technology, 41: 632-641.
Parada, J., Aguilera, J.M. and Brennan, C. (2011) Effect of guar gum content on some
physical and nutritional properties of extruded products. Journal of Food
Engineering, (103): 324-332.
Parimala, K.R. and Sudha, M.L. (2012) Effect of hydrocolloids on the rheological,
microscopic, mass transfer characteristics during frying and quality characteristics of
puri. Food Hydrocolloids, 27: 191-200.
Pedreschi, F., Aguilera, J.M. and Arbildua, J.J. (1999) CLSM study of oil location in fried
potato slices. Microscopy and Analysis, 37: 21–22.
Pedreschi, F. and Moyano, P.C. (2005b) Effect of pre-drying on texture and oil uptake of
potato chips. LWT - Food Science and Technology, 38: 599–604.
129
Peleg, M, (1983) Physical characteristics of Food powders In: Peleg,M and Bagley
(Eds).Physical properties of foods AVI publishing Co., Westport CT, pp. 293-324.
Plahar, W.A., Onuma, O.B. and Annan,N.T. (2003) Nutritional quality and storage stability
of extruded weaning food based on peanut, maize and soybean. Plant Foods for
Human Nutrition, 58(3): 1-16.
Potter, R., Stojceska, V. and Plunket, A. (2013) The use of fruit powders in extruded snacks
suitable for children’s diets, LWT-Food Science Technology, 51: 537-544.
Prakash, S., Jha, S.K. and Datta, N. (2004)Modelling of the rehydration process of
evaluation of blanched carrots dried by three different driers. Journal of Food
Engineering, 212: 449-453.
Primo-Martín, C. (2012) Cross-linking of wheat starch improves the crispness of deep-fried
battered food. Food Hydrocolloids, 28: 53-58.
Priya, R., Singhal, R.S. and Kulkarni, P.R. (1996) Carboxymethylcellulose and hydroxyl
propylmethylcellulose as additive in reduction of oil content in batter based deep fat
fried boondies.Carbohydrate Polymers, 29: 333–336.
Pua, C.K., Hamid, S.A.H., Tan, C.P., Hossein, M., Rahman, R.A. and Rusul, G.( 2008)
Storage stability of jackfruit (Artocarpus heterophyllus) powder packaged in
aluminium laminated polyethylene and metalized co-extruded biaxially oriented
polypropylene during storage. Journal of Food Engineering, 89: 419–428.
Ralet, M.T. (1991) Solubilisation of sugar-beet pulp cell wall polysaccharides by extrusion-
cooking. LWT – Food Science and Technology, 24:107–112.
130
Ramírez, C., Troncoso, E., Muñoz, J. and Aguilera, J.M. (2011) Microstructure analysis on
pre-treated apple slices and its effect on water release during air drying. Journal of
Food Engineering, 106: 253-261.
Rampersad, R., Badrie, N. and Comissiong, E. (2006) Physico-chemical and sensory
characteristics of flavoured snacks from extruded cassava/pigeon pea flour, Journal of
Food Science, 68(1): 363-367.
Ranganna, S. (2003)Handbook of analysis and quality control for fruits and vegetable
products - 2nd Edition,Tata McGraw-Hill Publishing Company Limited, New Delhi.
Riaz, M,N., Ali, M. and Rashida. (2009) Stability of Vitamins during Extrusion. Critical
Reviews in Food Science and Nutrition 49(4): 361-368.
Robin, F., Engmann, J., Pineau, N., Chanvrier, H., Bovet, N. and Della Valle, G. (2010)
Extrusion, structure and mechanical properties of complex starchy foams. Journal of
Food Engineering, 98(1): 19-27.
Ruales, J., Polit, P. and Nair, B. (1988) Nutritional quality of blended foods of rice, soy and
lupins, processed by extrusion. Food Chemistry, 29(4): 309-321.
Ryu, G.H. and Lee, C.H. (1988) Effects of moisture content and particle size of rice flour on
physical properties of the extrudate. Korean Journal of Food Science and Technology,
20(4): 463-469.
Ryu, G.H., Neumann, P. E., and Walker, C. E. (1993) Effect of some baking ingredients on
physical and structural properties of wheat flour extrudates. Cereal Chemistry, 70:
291–297.
131
Rzedzicki1, Z. and Baszczak, W. (2005) Impact of microstructure in modelling physical
properties of cereal extrudates. International Agro Physics, 19: 175-186.
Sacchetti, G., Pinnavaia, G.G., Guidoliu, E. and Rosa, D.M. (2004) Effect of extrusion
temperature and feed composition on functional, physical and sensory properties of
chestnut and rice flour based snack like products. Food Research International, 73:
527-534.
Saeleaw, M. and Schleining, G. (2011) Effect of frying parameters on crispiness and sound
emission of cassava crackers. Journal of Food Engineering, 103(3): 229-236
Saeleaw, M., Dürrschmid, K. and Schleining, G. (2012) The effect of extrusion conditions
on mechanical-sound and sensory evaluation of rye expanded snack. Journal of Food
Engineering, 110: 532–540.
Saguy, I.S. and Dana, D. (2003) Integrated approach to deep fat frying: engineering,
nutrition, health and consumer aspects. Journal of Food Engineering, 56: 143-152.
Sanz, T., Salvador, A. and Fiszman, S. M. (2004) Effect of concentration and temperature on
properties of methylcellulose-added batters application to battered fried seafood. Food
Hydrocolloid, 18(1): 127–131.
Schieber, A., Stintzing, F.C. and Carle, R. (2001)By-products of plant food processing as a
source of functional compounds recent developments. Trends in Food Science and
Technology 12: 401-413.
Schweiggert, U. (2004). Carrot pomace as a source of functional ingredients. Fluss Obst.
71:136–140.
132
Semin O.O., Gulum, S., Serpil, S. and Elif, T. (2009) Investigation of physicochemical
properties of breads baked in microwave and infrared-microwave combination ovens
during storage. European Food Research and Technology, 228(6): 883-893.
Serena,A. and Kundsen, B. (2007) Chemical and physicochemical characterisation of co-
products from vegetable food and agro industries. Animal Feed Science and
Technology, 139: 109–124.
Shannon, D., Hood, N. and Robert, T.T. (2010) Effect of protein, moisture content and barrel
temperature on the physicochemical characteristics of pea flour extrudates. Food
Research International, 43: 659–663.
Sharma, H.K., Kaur, J., Sarkar, B.C., Singh, C. and Singh, B. (2009) Effect of pretreatment
conditions on physiochemical parameters of carrot juice. International Journal of
Food Science and Technology, 44: 1-9.
Sharma, H.K., Kaur,B., Sarkar,B.C. and Singh, C. (2006) Thermal behavior of pure rice bran
oil, sunflower oil and their model blends during deep fat frying. Grasas Y Aceites, 57
4: 376-381.
Shoar, Z.D., Allan, K.H., Charles, S. and Brennan (2010) The physico-chemical
characteristics of extruded snacks enriched with tomato lycopene. Food Chemistry
123(4): 1117–1122.
Shyu, S.L., Hau, L.B. and Hwang, L.S. (2005) Effects of processing conditions on the quality
of vacuum-fried carrot chips. Journal of the Science of Food and Agriculture, 85:
1903–1908.
Siegel, A. and Fawcit, B. (1976) Food legume processing and utilization, IDRC-TS1.
International development centre Otttawa,Canada.
133
Singh, R.P. (1995) Heat and mass transfer in foods during deep-fat frying. Food Technology
49(4):134-137.
Singh, J., Dartois, A. and Kaur, L. (2010) Starch digestibility in food matrix: A review.
Trends in Food Science and Technology, 21: 168-180.
Singh, N. and Smith, A.C. (1997) A comparison of wheat starch, whole wheat meal and oat
flour in the extrusion cooking process. Journal of Food Engineering, 34: 15-32.
Singh, R.P. (2000) Scientific principles of shelf-life evaluation. In: Man, C.M.D., Jones, A.A.
(Eds.), Shelf life of foods, Second ed., Aspen Publishers Inc., Maryland, USA, 3-22.
Singh, U. (1988) Anti-nutritional factors of chickpea and pigeon pea and their removal by
processing. Plant Food Human Nutrition, 38: 251-261.
Singh, U., Santosa, B.A.S. and Rao, P.V. (1992) Effect of dehulling methods and physical
characteristics of grains on dhal yield of pigeon pea (Cajanus cajan L.) genotypes.
Journal of Food Science and Technology, 29(6): 350 – 353.
Smithy, S.L., Huff, H. E. and Hsieh, F. (1995) Processing parameters and product properties
of extruded beef and nonmeat cereal binders. LWT-Food Science and Technology, 28:
386–394.
Sothornvit, R. (2011) Edible coating and post-frying centrifuge step effect on quality of
vacuum-fried banana chips. Journal of Food Engineering, 107: 319–325.
Srivastava, R.P. and Kumar, S. (2003) Fruits and vegetable preservation – principles and
practices, International Book Distributing Co., India, pp. 360.
134
Stefanovich, A.F. and Karel, M. (1982) Kinetic of beta carotene degradation at temperature
typical of air drying of foods. Journal of Food Processing and Preservation, 6: 227–
242.
Stephens, S.T., Saldana, G. and Lime, B.J. (1976) Neutralized juice of acid treated
carrots. Journal of Food Science, 41: 1245–1246.
Stephens, T.H. and McLemore, T.A. (1969) Preparation and storage of dehydrated carrot
flakes. Food Technology, 23(12): 1600–1602.
Stojceska, V., Ainsworth, P., Plunkett, A., Ibanoglu, E. and Ibanoglu, S. (2008) Cauliflower
by-products as a new source of dietary fibre, antioxidants and proteins in cereal based
ready-to-eat expanded snacks. Journal of Food Engineering, 87: 554–563.
Stojceskaa, V., Ainsworth, A., Plunkett, A. and SenolIbanoglu, A. (2010) The advantage of
using extrusion processing for increasing dietary fibre level in gluten-free products.
Food Chemistry, 12(1): 156–164.
Stoll, A., Schieber, A., Carle, R., Pfannhauser, W., Fenwick, G. R. and Khokhar, S. (2001)
Carrot pomace an under estimated by-product in foods. Cambridge: The Royal Society
of Chemistry, 525–527.
Stoll, T., Schweiggert, U., Schieber, A. and Carle, R. (2003) Application of hydrolyzed carrot
pomace as a functional food ingredient to beverages. Journal of Food Agriculture and
Environment, 1(2): 88-92.
Sulaeman, A., Keeler, L., Giraud, D. W., Taylor, S. L. and Driskell, J. A. (2003) Changes in
carotenoid, physicochemical and sensory values of deep-fried carrot chips during
storage. International Journal of Food Science and Technology, 38: 603–613.
135
Sung, W.C and Stone, M. (2005) Microstructural studies of pasta and starch pasta. Journal of
Marine Science and Technology, 13: 83-88.
Tan, J., Zhang, H. and Gao, X. (1997) SEM image processing for food structure analysis.
Journal of Texture Studies, 28: 657–672.
Tangirala, S., Sarkar, B.C., Sharma, H.K. and Kumar, N. (2012) Modelling and
characterization of blended guava pomace and pulse powder based rice extrudates.
International Journal of Food Engineering, 8(1): 1–24.
Torres, A., Frias, J., Grantio, M. and Vidalvelrede, C. (2006) Fermented pigeon pea (Cajanus
cajan) ingredients in pasta products. Journal of Agricultural Food Chemistry, 54 (18):
6685-6691.
Trater, A.M., Alavi, S. and Rizvi, S.S.H. (2005) Use of non-invasive X-ray microtomography
for characterizing microstructure of extruded biopolymer foams. Food Research
International, 38(6): 709-719.
Troncosoa, E., Pedreschi, F and Zunigac, R.N. (2009) Comparative study of physical and
sensory properties of pre-treated potato slices during vacuum and atmospheric frying
LWT - Food Science and Technology, 42: 187–195.
Ufheil, G. and Escher, F. (1996) Dynamics of oil uptake during deep-fat frying of potato
slices. LWT-Food Science and Technology, (29): 640-643.
Upadhyay, A., Sharma, H.K. and Sarkar, B.C. (2008) Characterization and Dehydration
Kinetics of Carrot Pomace. Agricultural Engineering International: The CIGR
Ejournal. Manuscript FP07 35. Vol. X.
136
Upadhyay, A., Sharma, H.K. and Sarkar, B.C. (2010) Optimization of carrot pomace powder
incorporation on extruded product quality by response surface methodology. Journal
of Food Quality, 33: 350-369.
Varnalis, A.I., Brennan, J.G. and MacDougall, D.B. (2001) A proposed mechanism of high-
temperature puffing of potato part I The influence of blanching and drying conditions
on the volume of puffed cubes. Journal of Food Engineering, 48: 361-367.
Vickers, Z., and Bourne, M.C. (1976) A psychoacoustic theory of crispness. Journal of Food
Science, 41: 1158–1164.
Visessurakarn, S., Duangmal, K. and Itthiwachana, S. (1991) Use of broken rice for breakfast
cereals. Food, 21(1): 24-36.
Wagner, L.A. and Warthesen, J.J. (1995) Stability of spray dried encapsulated carrot
carotenes. Journal of Food Science, 60: 1048-1053.
Walde, S.G., Math, R.G., Chakkarvarthi, A. and Rao, D.G. (1992) Preservation of carrots by
dehydration techniques. Indian Food Packer, 46: 37-42.
Wang, N., Bhirud, P., Sosulski, F. and Tyler, R. (1999) Pasta-like product from pea flour by
twin-screw extrusion. Journal of Food Science, 64: 671–678.
Wang, Y.Y. and Ryu, G.H. (2013) Physical properties of properties extruded corn grits with
corn fibre by CO2 injection extrusion. Journal of Food Engineering, 116(1): 14-20.
Wang, R., Zhanga, M.and Arun ,M.(2010) Effects of vacuum and microwave freeze drying
on microstructure and quality of potato slices. Journal of Food Engineering, 101:
131–139.
137
Warburton, S.C., Donald, A.M. and Smith, A.C. (1992) Structure and mechanical properties
of brittle starch foams. Journal of Material Science, 27: 1469–1474.
Wójtowicz, A. (2005) Influence of some functional components addition on the
microstructure of precooked pasta. Polish Journal of Food and Nutrition Sciences, 14
(4): 417-422.
Wójtowicz,A. and Leszek, M. (2011)Effect of wheat bran addition and screw speed on
microstructure and textural characteristics of common wheat precooked pasta-like
products.Polish Journal of Food and Nutrition,61 (2): 101-107.
Yagci, S. and Goguş, F. (2008) Response surface methodology for evaluation of physical and
functional properties of extruded snack foods developed from food-by-products.
Journal of Food Engineering, 86: 122–132.
Yagci, S. and Gogus, F. (2009) Effect of incorporation of various food by-products on some
nutritional properties of rice-based extruded foods. Food Science and Technology.
International, 15: 571-581.
Yeh, A. and Jaw, Y.M. (1999) Effects of feed rate and screw speed on operating
characteristics and extrudate properties during single-screw extrusion cooking of rice
flour. Cereal Chemistry, 76(2): 236-242.
Yogua,V. and Rosana, G. (2011) Physical and thermal properties of potato chips during
vacuum frying, Journal of Food Engineering, 104 (2): 272-283.
Yoon, K.Y., Cha, M.H., Shin, S.R.and Kim, K. S. (2005) enzymatic production of a soluble-
fibre hydrolyzate from carrot pomace and its sugar composition. Food Chemistry,
92(1): 151-157.
138
Yoshitomi, B. (2004) Effect of extrusion cooking temperature on the microstructure of
extruded fish pellets. Fish Science, 70: 1157–1163.
Young, T.L. and Schwarz, P.B. (2004) Physical and cooking properties of restructured grain
extruded from selected cereal and legume flours. Food Science and Biotechnology,
13(4): 438-442.
Zarzycki, P., Rzedzicki, Z. and Baszczak, W. (2010) Application of oat whole-meal and
protein components as modifiers of extrudates microstructure. International
Agrophysics, 24: 397-406.
Zhang, D. and Hamauzu, Y. (2004) Phenolics, ascorbic acid, carotenoids and antioxidant
activity of broccoli and their changes during conventional and microwave cooking.
Food Chemistry, 88: 503-509.
Zhen-Ma, A.B., Joyce, I., Boyeb, Benjamin, K., Simpsonc, Shiv, O., Prasher, A. D. and
Monpetit, B.L.M. (2011) Thermal processing effects on the functional properties and
microstructure of lentil, chickpea, and pea flours. Food Research International, 44:
2534–2544.
Zhu, L.J., Shukri. R., Normell. J.,Street. S., Alavi. S., Dogan, H. and Cheng-Shi,Y.(2010)
Mechanical and microstructural properties of soy protein high amylose corn starch
extrudates in relation to physiochemical changes of starch during extrusion. Journal
of Food Engineering, 100 (2): 232–238.