Post on 11-Mar-2020
transcript
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
1 | P a g e
REQUEST FOR QUALIFICATION (RFQ) CUM REQUEST FOR PROPOSAL (RFP) BID DOCUMENT
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
PART I – INSTRUCTION TO BIDDERS
RFP Reference: RFQ cum RFP - 890
Directorate of Medical & Health Services, Uttar Pradesh
Director, CMSD Swasthya Bhawan, Kaisarbagh, Lucknow (Uttar Pradesh) India Phone & Fax: 0522- 2625809
Website: www.uphealth.up.nic.in & www.dghealth.up.nic.in
Email: cmsd.dghealth@gmail.com
12th April, 2017
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
2 | P a g e
This page has been intentionally left blank.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
3 | P a g e
Glossary
S. No. Item Abbreviation Description or Definitions / Interpretations
1. Arbitrator Dispute resolving Authority – Arbitrator Tribunal shall consist of Three Arbitrators.
2. AERB Atomic Energy Regulation Board
3. Bidder A Sole Bidder or Principal Bidder in case of a Consortium.
4. Associate A person who controls, is controlled by, or is under the common control with such Bidder (as used in this definition, the expression “control” means, with respect to a person which is a company or corporation, the ownership, directly or indirectly, of at least 51% (fifty one per cent) of the voting shares of such person, and with respect to a person which is not a company or corporation, the power to direct the management and policies of such person, by operation of law ).
5. CMS Central Medical Superintendent
6. Contract Signing Authority
Director General Medical and Health, Department of Medical Health & Family Welfare, Government of Uttar Pradesh
7. DD Demand Draft
8. DGMH Director General Medical and Health, Department of Medical Health & Family, Government of Uttar Pradesh
9. EMD Earnest Money Deposit or Bid Security
10. FD Fixed Deposit
11. GLP Good Laboratory Practices
12. LLP Limited Liability Partnership
13. NHM National Health Mission
14. Nodal Authority
Director General Medical and Health, Department of Medical Health & Family Welfare, Government of Uttar Pradesh
15. Paying Authority
Director General Medical and Health, Department of Medical Health & Family Welfare, Government of Uttar Pradesh
16. POA Power of Attorney
17. OPC One person company
18. RFP Request for Proposal
19. RFQ Request for Qualification
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
4 | P a g e
This page has been intentionally left blank.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
5 | P a g e
Table of Contents
Table of Contents ......................................................................................................................... 5
1 RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs,
Surgical & Sutures Items .............................................................................................................. 6
1.1 Disclaimer ................................................................................................................................ 6
1.2 Notice Inviting Bid and Bid Data Sheet .................................................................................... 8
1.3 Structure of the RFP ................................................................................................................. 8
1.4 Background Information .......................................................................................................... 9
1.5 Instructions to the Bidders .................................................................................................... 10
1.6 Criteria for Evaluation ............................................................................................................ 19
1.7 Empanelment Process ........................................................................................................... 20
1.8 Scope of Work ........................................................................................................................ 23
1.9 Payment Terms ...................................................................................................................... 25
1.10 Other Terms and Conditions of the RFP and Contract .......................................................... 26
1.11 Conflict of Interest ................................................................................................................. 28
1.12 Damages for Mishap/Injury ................................................................................................... 30
1.13 Termination of Contract ........................................................................................................ 30
1.14 Arbitration ............................................................................................................................. 31
Appendix A: Forwarding Letter .......................................................................................................... 33
Appendix B: Bidder’s Information ..................................................................................................... 35
Appendix C: Performance Statement ................................................................................................ 37
Appendix D: Personnel Details .......................................................................................................... 38
Appendix E: List of Equipment/Instrument/Apparatus available in Lab ........................................... 39
Appendix F: Microbiological Facilities ............................................................................................... 40
Appendix G: Declaration by the Bidder ............................................................................................. 41
Appendix H: Litigation Declaration Proforma.................................................................................... 43
Appendix I: Proforma for Bank Guarantee for EMD & Performance Security .................................. 44
Format for Bank Guarantee for Earnest Money Deposit (EMD) ....................................................... 44
Format for Bank Guarantee for Performance Security ..................................................................... 45
Appendix J: Format for Power of Attorney for Signing of Proposal .................................................. 48
Appendix K: Financial Bid ................................................................................................................... 50
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
6 | P a g e
RFP FOR EMPANELMENT OF APPROVED ANALYTICAL TESTING LABORATORIES
FOR ANALYSIS OF DRUGS, SURGICAL & SUTURES ITEMS
1 RFP for Empanelment of Approved Analytical Testing Laboratories for
Analysis of Drugs, Surgical & Sutures Items
1.1 Disclaimer
The information contained in this Request for Qualification cum Request for Proposal document
(hereafter referred as the “RFP”) or subsequently provided to Bidder(s), whether verbally or in
documentary or any other form by or on behalf of the Nodal Authority or any of its employees or
advisors, is provided to Bidder(s) on the terms and conditions set out in this RFP and such other
terms and conditions subject to which such information is provided.
This RFP is not an agreement and is neither an offer nor invitation by the Nodal Authority to the
prospective Bidder(s) or any other person. The purpose of this RFP is to provide interested parties
with information that may be useful to them in submitting Bids pursuant to this RFP. This RFP
includes statements, which reflect various assumptions and assessments arrived at by the Nodal
Authority in relation to the Projects. Such assumptions, assessments and statements do not purport
to contain all the information that each Bidder may require. This RFP may not be appropriate for all
persons, and it is not possible for the Nodal Authority, its employees or advisors to consider the
investment objectives, financial situation and particular needs of each party who reads or uses this
RFP. The assumptions, assessments, statements and information contained in the Bidding
Documents may not be complete, accurate, adequate or correct. Each Bidder should, therefore,
conduct its own investigations and analysis and should check the accuracy, adequacy, correctness,
reliability and completeness of the assumptions, assessments, statements and information
contained in this RFP and obtain independent advice from appropriate sources.
Information provided in this RFP to the Bidder(s) is on a wide range of matters, some of which may
depend upon interpretation of law. The information given is not intended to be an exhaustive
account of statutory requirements and should not be regarded as a complete or authoritative
statement of law. The Nodal Authority accepts no responsibility for the accuracy or otherwise for
any interpretation or opinion on law expressed herein.
The Nodal Authority, its employees and advisors make no representation or warranty and shall have
no liability to any person, including any Bidder under any law, statute, rules or regulations or tort,
principles of restitution or unjust enrichment or otherwise for any loss, damages, cost or expense
which may arise from or be incurred or suffered on account of anything contained in this RFP or
otherwise, including the accuracy, adequacy, correctness, completeness or reliability of the RFP and
any assessment, assumption, statement or information contained therein or deemed to form part of
this RFP or arising in any way for participation in this Bid Stage.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
7 | P a g e
The Nodal Authority also accepts no liability of any nature whether resulting from negligence or
otherwise howsoever caused arising from reliance of any Bidder upon the statements contained in
this RFP.
The Nodal Authority may in its absolute discretion, but without being under any obligation to do so,
update, amend or supplement the information, assessment or assumptions contained in this RFP.
The issue of this RFP does not imply that the Nodal Authority is bound to select a Bidder or to
appoint the Selected Bidder for the Projects and the Nodal Authority reserves the right to reject all
or any of the Bidders or Bids without assigning any reason whatsoever.
The Bidder shall bear all its costs associated with or relating to the preparation and submission of its
Bid including but not limited to preparation, copying, postage, delivery fees, expenses associated
with any demonstrations or presentations which may be required by the Nodal Authority or any
other costs incurred in connection with or relating to its Bid. All such costs and expenses will remain
with the Bidder and the Nodal Authority shall not be liable in any manner whatsoever for the same
or for any other costs or other expenses incurred by a Bidder in preparation or submission of the Bid,
regardless of the conduct or outcome of the Bidding Process.
The statements and explanations contained in this RFP are intended to provide a better
understanding to the Bidders about the subject matter of this RFP and should not be construed or
interpreted as limiting in any way or manner the scope of work and obligations of the Service
Provider set forth in the Service Agreement or the Nodal Authority’s rights to amend, alter, change,
supplement or clarify the scope of work or the Project, to be awarded pursuant to this RFP.
Consequently, any omissions, conflicts or contradictions in the Bidding Documents including this RFP
are to be noted, interpreted and applied appropriately to give effect to this intent, and no claims on
that account shall be entertained by the Nodal Authority.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
8 | P a g e
1.2 Notice Inviting Bid and Bid Data Sheet
Director General Medical and Health, Department of Medical Health & Family Welfare,
Government of Uttar Pradeshhereinafter known as the Nodal Authority, invites RFQ cum RFP from
eligible Analytical Testing Laboratories situated in situated in Uttar Pradesh and neighboring
states/UTs – Delhi, Haryana, Madhya Pradesh, Himachal Pradesh, Uttarakhand, Rajasthan, Punjab,
Chandigarh, Bihar , Jharkhand and Chhattisgarhfor analysis of Drugs, Surgical & Sutures Item.
The bidders are being provided with this Bid Data Sheet (BDS) comprising of important, factual data
on the bid.
S. No. Description Schedule
1. Date of Sale of Bid documents - Opens 20th April, 2017
2. Website for download of Bid Documents http://dghealth.up.nic.in http://uphealh.nic.in
3. Cost of Bid Enquiry document Cost of Bid Enquiry document will be non-refundable fee of Rs. 60375/- (Rupees Sixty Thousand , three hundred and Seventy Five Only).
4. Pre-Bid meeting date and time 27th April, 2017at 12:00 hours
5. Pre-Bid meeting venue. OFFICE OF THE DIRECTOR GENERAL MEDICAL & HEALTH U.P LUCKNOW (C.M.S.D. Section)
6. Closing date and time of receipt of Bid 25thMay, 2017at 12:00 hours
7. Time, date and venue of opening of Technical Bid
25thMay , 2017 at 14:30 hoursat OFFICE OF THE DIRECTOR GENERAL MEDICAL & HEALTH U.P LUCKNOW (C.M.S.D. Section)
8. EMD (Earnest Money Deposit) Rs 200,000/- (Rupees two lakhs only)
9. Bid Parameter(s) Rates for complete analysis of one sample of each product, exclusive of Service Tax
10. Performance Security Rs 500,000/- (Rupees Five Lakhs only)
1.3 Structure of the RFP
This Request for Proposal (RFP) document issued by the Nodal Authority –Director General Medical
and Health, Department of Medical Health & Family Welfare, Government of Uttar Pradeshfor the
Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures
Items, comprises of the following.
1.3.1 Instructions on the Bid process.
The Instructions on the Bid Process for the purpose of responding to this RFP are, a) General instructions to Bidders for bidding process (Section 1.5) b) Bid evaluation process including the parameters for Bid Qualification, Technical
responsiveness evaluation and financial evaluation to facilitate Nodal Authority in determining bidder’s suitability as the Service Provider (Section 1.6)
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
9 | P a g e
c) Empanelment process (Section 1.7) d) Payment Terms (Section 1.9) e) Bid submission document formats (Appendix A, B, C, D, E, F, G, H, I, J & K)
1.3.2 Delivery Requirements of the project.
The contents of the document broadly cover the following areas, a) About the project and its objectives (Section 1.4) b) Scope of work for the Service Provider (Section 1.8) c) Service requirements for the Service Provider (Section 1.8)
The bidder is expected to respond to the requirements as completely and in as much relevant detail
as possible, and focus on demonstrating bidder’s eligibility to become Service Provider of the Nodal
Authority.
The bidders are expected to examine all Instructions, Forms, Terms, Project requirements and other
information in the RFP documents. Failure to furnish all information required as mentioned in the
RFP documents or submission of a Bid not substantially responsive to the RFP documents in every
respect will be at the Bidder's risk and may result in rejection of the Bid.
1.4 Background Information
1.4.1 Basic Information
1.4.1.1 Nodal Authority, Director General Medical and Health, Department of Medical Health &
Family Welfare, Government of Uttar Pradeshinvites responses (“Bids”) to this Request
for Qualification cum Request for Proposals (“RFP”) from Service Providers (“Bidders”) for:
Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs,
Surgical & Sutures Items as per details in Appendix K
Details arealso further described under Section 1.8 of this RFP document.
1.4.1.2 Any contract that may result from this Government procurement process will be issued for
a term of 01 (One) years (“the Term”).
1.4.1.3 The Nodal Authority reserves the right to extend the Term for a period of 06 (six) months
on the same terms and conditions, or those mutually agreed between the Nodal Authority
and Selected Bidder / Service Provider, subject to the Nodal Authority’s obligations at law.
1.4.1.4 Bids must be received not later than time, date and at the venue mentioned in the Bid
Data Sheet. Bids that are received late will be rejected.
1.4.2 Project Background
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
10 | P a g e
Currently, at the time of supply, the vendor is required to supply a Certificate of Analysis for each
batch of Drug, Surgical or Suture item, tested at a third party NABL accredited laboratory.
Post distribution, the state Food & Drug Administration (FDA) takes random samples for testing at
various stocking points (District Hospital, District Warehouse, Health Facility). The sample is sent to
FDA drug testing laboratory for detailed testing. In case of Quality failure, the entire batch is
returned to the supplier.
Going forward, in addition to the existing process, at the time of receipt of every batch of Drug,
Surgical or Suture items, the state plans to conduct analytical tests through approved analytical
testing laboratories. The state would like to empanel approved analytical testing laboratories for
this.
1.5 Instructions to the Bidders
1.5.1 General Instructions
1.5.1.1 The bidder shall prepare and submit its offer as per instructions given under this Section
1.5.
1.5.1.2 The bids shall be complete with all documents. Those submitted by fax or by email with
attachments shall not be considered.
1.5.1.3 The price quoted shall be firm and shall be quoted in the format as per attached Appendix
Konly.
1.5.1.4 The bids (comprising of Technical and Financial) shall be submitted (with a Forwarding
Letter as per Appendix A) before the last date of submission. Late bids shall not be
considered.
1.5.1.5 All information supplied by Bidders may be treated as contractually binding on the Bidders,
on successful award of the assignment by the Nodal Authority on the basis of this RFP.
1.5.1.6 No commitment of any kind, contractual or otherwise shall exist unless and until a formal
written contract has been executed by or on behalf of the Nodal Authority. Any
notification of preferred bidder status by the Nodal Authority shall not give rise to any
enforceable rights by the Bidder. The Nodal Authority may cancel this public procurement
at any time prior to a formal written contract being executed by or on behalf of the Nodal
Authority.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
11 | P a g e
1.5.1.7 This RFP and its contents supersedes and replaces any previous public documentation &
communications on this RFP and its process, and Bidders should place no reliance on such
communications.
1.5.1.8 Right to Terminate the Process
1.5.1.8.1 Nodal Authority may terminate the RFP process at any time and without assigning any
reason. Nodal Authority makes no commitments, express or implied, that this process
will result in a business transaction with anyone.
1.5.1.8.2 This RFP does not constitute an offer by Nodal Authority. The bidder's participation in
this process may result Nodal Authority selecting the bidder to engage towards execution
of the contract.
1.5.2 Compliant Bids / Completeness of Response
1.5.2.1 Bidders are advised to study all Instructions, Forms, Terms, Requirements and other
information in the RFP documents carefully. Submission of the bid shall be deemed to have
been done after careful study and examination of the RFP document with full
understanding of its implications.
1.5.2.2 Failure to comply with the requirements of this paragraph may render the bid non-
compliant and the bid may be rejected. Bidders must:
1.5.2.2.1 Follow the format of this RFP and respond to each element in the order and form as set
out in this RFP
1.5.2.2.2 Comply with all requirements as set out within this RFP.
1.5.3 Pre-Bid Meeting & Clarifications
1.5.3.1 The Nodal Authority will conduct a pre-bid meeting with the interested /prospective
bidders as mentioned in Bid Data Sheet.
1.5.3.2 The Nodal Authority may modify the RFP by issuing a Corrigendum before the Proposal
Due Date. Any Corrigendum thus issued shall be part of the RFP and shall be uploaded on
the following website: www.uphealth.up.nic.in & www.dghealth.up.nic.in
1.5.3.3 To give prospective Bidders reasonable time in which to take Corrigendum into account in
preparing their bids, the Nodal Authority may, at its sole discretion, extend the Proposal
Due Date.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
12 | P a g e
1.5.4 Key Requirements of the Bid
1.5.4.1 RFP Document Fees
1.5.4.1.1 RFP document can be downloaded from www.uphealth.up.nic.in &
www.dghealth.up.nic.in
1.5.4.1.2 The bidder will submit non-refundable fee of amount as specified in Bid Data Sheet in the
form of account payee Demand Draft, drawn on a scheduled bank in India, in favour of
Director General of Medical & Health Services, Uttar Pradesh payable at Lucknow. The
demand draft of RFP document fees should be submitted along with bids.
1.5.4.1.3 Cost of RFP / Bid Enquiry document will be non-refundable fee of amount as specified in
Bid Data Sheet even if a bidder opts to bid for empanelment for conducting analytical
tests for more than one Drug, Surgical or Suture Item.
1.5.4.2 Earnest Money Deposit (EMD)
1.5.4.2.1 Bidders shall submit, along with their Bids, EMD of of amount as specified in Bid Data
Sheet. EMD should be in the form of a Fixed Deposit or Bank Guarantee (in the format
specified in Appendix I) issued by any Nationalized/Scheduled Indian bank in favor of
Director General of Medical & Health Services, Uttar Pradesh, Lucknow.
1.5.4.2.2 Amount to be furnished as EMD shall be as specified in Bid Data Sheeteven if a bidder
opts to bid for empanelment for conducting analytical tests for more than one Drug,
Surgical or Suture Item.
1.5.4.2.3 No bidding entity is exempt from deposit of EMD along with its bid. Bids submitted by
bidders without EMD shall be rejected.
1.5.4.2.4 The EMD of unsuccessful bidder will be returned to them without any interest, within 30
days after the signing of agreement with the successful bidder.
1.5.4.2.5 The EMD of the successful bidder will be returned without any interest, after receipt of
its Performance Security as per the terms of the Contract.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
13 | P a g e
1.5.4.2.6 EMD of a bidder may be forfeited without prejudice to other rights of the Nodal
Authority, if the bidder withdraws or amends its bid or impairs or derogates from the bid
in any respect within the period of validity of its bidor if it comes to notice that the
information /documents furnished in its bid is incorrect, false, misleading or forged. In
addition to the aforesaid grounds, the Successful Bidders’ EMD will also be forfeited
without prejudice to other rights of Nodal Authority, if it fails to furnish the required
Performance Security within the specified period or fails to sign the contract in
accordance with this RFP.
1.5.4.3 Submission of Bids
The Bidder shall submit the bid in One Large Envelope superscripted with Bid Reference Number
along with Name and Communication Address of the Bidder. The bid shall be made in 2 (Two)
SEPARATE SEALED ENVELOPES, all placed within the large envelope, each superscripted with Bid
Reference Number along with Name and Communication Address of the Bidder. The original bid
documents are as given below:
1.5.4.3.1 The First Sealed Envelope shall be the Technical Bid, having all documentation spirally
bound, numbered on each page, and shall be marked in bold letter as “TECHNICAL BID”.
It MUST comprise of the following for eligibility:
1.5.4.3.1.1 Forwarding Letter as per “Appendix A”, confirming performing the assignment and
confirmation regarding furnishing Performance Security in case of Award of Contract.
To be furnished by Bidder on their Letterhead
1.5.4.3.1.2 Bid Cost Receipt/ Demand Draft towards the cost of Bid document to be attached in
case bid document has been downloaded from website www.uphealth.up.nic.in &
www.dghealth.up.nic.in
To be submitted by Bidder
1.5.4.3.1.3 EMD in the form of Fixed Deposit Receipt / Bank Guarantee as per “Appendix I”. Refer
“Appendix I” - Format of Bank Guarantee for EMD for the required validity period.
To be submitted by Bidder
1.5.4.3.1.4 Particulars of the bidder as per “Appendix B”.
To be furnished by Bidder on their Letterhead along with the following documents.
1.5.4.3.1.4.1 Copy of the Certificate of Registration of CST, VAT and Service Tax, as applicable
under the provisions of Law, with the concerned Authority, valid as on date of
submission of Bid documents. In case of non-applicability of any of the
mentioned certifications of registration, the Bidder shall provide a Declaration on
its letter-head stating provisions under law for exemption.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
14 | P a g e
1.5.4.3.1.5 Copy of Analytical approval (Form 37) duly renewed up to date, issued by the State
Licensing Authority.
To be furnished by Bidder
1.5.4.3.1.6 Copy of certificate indicating compliance to Schedule L-1 of Drugs & Cosmetics Rules,
1945 (GLP certificate) and Copy of accreditation from National Accreditation Board
withproper scope to undertake testing of drugs, surgical and sutures.
To be furnished by Bidder
1.5.4.3.1.7 Documentary evidence of having analyzed Drugs /Surgical / Sutures during the last
three years as per“Appendix C”
To be furnished by Bidder
1.5.4.3.1.8 Details of Bidder’s Laboratoryalong with supporting proofs/documents. The following
details should be included:
1.5.4.3.1.8.1 The list of personnel employed in the laboratory along with proof of their
qualifications and relevant approvals as per “Appendix D”
1.5.4.3.1.8.2 The list of instruments available in the laboratory as per “Appendix E”
1.5.4.3.1.8.3 Micro Biological facilities available in the laboratory as per “Appendix F”
1.5.4.3.1.8.4 List of Reference Samples along with their date of procurement and
quantities.
1.5.4.3.1.8.5 Any other relevant details of the laboratory
To be furnished by Bidder
1.5.4.3.1.9 A Duly notarized declaration from the Bidder in the format given in “Appendix G” to the
effect that the firm has neither been declared as defaulter nor blacklisted/debarred by
any Competent Authority of Government of India or its Organizations or Government of
any State or its Organizations or any PSU and should MANDATORILY make a declaration
in case it has been, in the past or present, directly involved or been a party to any
previous / ongoing CBI litigation or litigations involving criminal indictment / offence in
a Court of Law. Refer proforma in “Appendix H”.
To be furnished by the Bidder on a Non – Judicial Stamp Paper of Rs. 100 duly attested by Executive Magistrate / Public Notary
1.5.4.3.1.10 A Duly notarized valid Power of Attorney in favour of signatory to submitted bid
documents, as per the Board Resolution or applicable provisions under Articles and
Memorandum of Association. Refer “Appendix J” for Proforma for Power of Attorney.
To be furnished by the Bidder on a Non – Judicial Stamp Paper of Rs. 100 duly attested by Executive Magistrate / Public Notary
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
15 | P a g e
1.5.4.3.2 The Second Sealed Envelope shall contain the financial Bid and shall be marked in bold
letters as “FINANCIAL BID”. The rates quoted should be inclusive of all taxes but exclusive
of service tax and shall be mentioned in the format as per attached “Appendix K” only. A
compact disc (CD) with Appendix K in excel and pdf format should also be enclosed.
To be furnished by Bidder on their Letterhead
1.5.4.3.3 The Bidder’s Bid shall contain no interlineations or overwriting except as necessary to
correct errors, in which cases such correction must be initialed by the person or persons
signing the bid.
1.5.4.3.4 In case of discrepancy in the quoted prices, the price written in words will be considered
as final and valid.
1.5.4.3.5 Please Note that Prices should not be indicated in the Technical Bid but should only be
indicated in the Financial Bid.
1.5.4.3.6 The outer (larger) envelope thus prepared should also indicate clearly the name, address,
telephone number, E-mail ID and fax number of the bidder to enable the Bid to be
returned unopened in case it is declared "Late".
1.5.4.3.7 All the pages of the Bid must be sequentially numbered and must contain the list of
contents with page numbers. Any deficiency in the documentation may result in the
rejection of the Bid.
1.5.4.3.8 The Original Bid shall be prepared in indelible ink. It shall contain no interlineations or
overwriting, except as necessary to correct errors made by the bidder itself. Any such
corrections must be initialed by the person (or persons) who sign(s) the Bids.
1.5.4.3.9 Cover Page and Forwarding Letter of the bid shall be initialed and stamped by the person
or persons who sign the bid.
1.5.4.4 Bid Preparation Costs
The bidder shall be responsible for all costs incurred in connection with participation in the RFP
process, including, but not limited to, costs incurred in conduct of informative and other diligence
activities, participation in meetings/discussions/presentations, preparation of Bid, in providing any
additional information required by Nodal Authority to facilitate the evaluation process, and in
negotiating a definitive contract or all such activities related to the bid process.
Nodal Authority will in no case be responsible or liable for those costs, regardless of the conduct or
outcome of the bidding process.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
16 | P a g e
1.5.4.5 Language
The Bid should be filled by the Bidder in English language only. If any supporting documents
submitted are in any language other than English, translation of the same in English language is to be
duly attested by the Bidders. For purposes of interpretation of the Bid, the English translation shall
govern.
1.5.4.6 Late Bids
1.5.4.6.1 Bids received after the due date and the specified time (including the extended period if
any) for any reason whatsoever, shall not be entertained and shall be returned
unopened.
1.5.4.6.2 The bids submitted by telex/telegram/fax/e-mail etc. shall not be considered. No
correspondence will be entertained on this matter.
1.5.4.6.3 Nodal Authority shall not be responsible for any postal delay or non-receipt/ non-delivery
of the documents. No further correspondence on the subject will be entertained.
1.5.4.6.4 Nodal Authority reserves the right to modify and amend any of the above-stipulated
condition/criterion depending upon project priorities vis-à-vis urgent commitments.
1.5.5 Evaluation Process
1.5.5.1 Nodal Authority will constitute a BidEvaluation Committee to evaluate the responses of
the bidders.
1.5.5.2 The bids will be scrutinized by the Bid Evaluation Committee appointed by the Nodal
Authority to determine whether they are complete and meet the essential and important
requirements, conditions set out by this RFP and whether the bidder is eligible and
qualified as per criteria laid down in the Bid Enquiry Documents. The bids, which do not
meet the aforesaid requirements and/or do not provide requisite supporting documents /
documentary evidence required to meet eligibility criteria are liable to be treated as non-
responsive and may be ignored or rejected.
1.5.5.3 The decision of the Nodal Authority as to whether the bidder is eligible and qualified or not
and whether the bid is responsive or not shall be final and binding on the bidders. No
correspondence will be entertained outside the process of negotiation/ discussion with the
Bid Evaluation Committee.
1.5.5.4 Financial bids of only those bidders, who qualify on technical bid, will be considered and
opened.
1.5.5.5 The Bid Evaluation Committee may co-opt representatives of one or more relevant
Departments Agencies/Entities as may be deemed necessary.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
17 | P a g e
1.5.5.6 The Bid Evaluation Committee may ask for meetings with the Bidders to seek clarifications
on their Bids
1.5.5.7 The Bid Evaluation Committee reserves the right to reject any or all Bids on the basis of any
deviations.
1.5.5.8 Bid Opening
1.5.5.8.1 The Bids submitted up to on or before stipulated date and time, as indicated in Bid Data
Sheet, will be opened at office of the director general medical & health u.p lucknow
(c.m.s.d. section) as per date and time indicated in Bid Data Sheet, by Selection
Committee and/or Nodal Authority or any other Officer(s) authorized by Nodal
Authority, in the presence of such of those Bidders or their representatives who may be
present at the time of opening.
1.5.5.8.2 The representatives of the bidders should be advised to carry the identity card or a letter
of authority from their respective bidding firms to identify their bonafides for attending
the opening of the Bid.
1.5.5.9 Bid Validity
The bids shall remain valid for acceptance for a period of 120 days from the opening of Price Bid
which will be opened within 180 days from the date of opening of Technical Bid, i.e. total bid validity
shall be 300days. The Nodal Authority may request the bidder to extend the bid validity (If required )
before expiry of bid validity period as deemed fit. Contract will be valid for duration of 01 (one) Year.
The Nodal Authority reserves the right to extend the Term for a period of 06 (six) months on the
same terms and conditions, or those mutually agreed between the Nodal Authority and Selected
Bidder / Service Provider, subject to the Nodal Authority’s obligations at law.
1.5.5.10 BidScrutiny
1.5.5.10.1 Initial Bid scrutiny will be held and incomplete details as given below will be treated as
non-responsive. If Bids
1.5.5.10.1.1 Are not submitted in as specified in the RFP document
1.5.5.10.1.2 Received without the Letter of Authorization (Power of Attorney)
1.5.5.10.1.3 Are found with suppression of details
1.5.5.10.1.4 With incomplete information, subjective, conditional offers and partial offers submitted
1.5.5.10.1.5 Submitted without the documents requested, as set out under Section 1.5
1.5.5.10.1.6 Have non-compliance with any of the clauses stipulated in the RFP
1.5.5.10.1.7 With lesser validity period
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
18 | P a g e
1.5.5.10.2 All responsive Bids will be considered for further processing as below:
Nodal Authority will prepare a list of responsive bidders, who comply with all the Terms
and Conditions of this bid. All eligible bids will be considered for further evaluation by a
Selection Committee according to the Evaluation process defined in this RFP document.
The decision of this Committee will be final in this regard.
1.5.5.10.3 Evaluation for Eligibility: The bids will be evaluated for Eligibility to bid based on
documents submitted. The following documents will be examined:
1.5.5.10.3.1 Bid Document Cost, EMD (Appendix I) – Non submission of these documents will lead to
summary rejection of the bid and the bid will not be evaluated further. In case the
bidder is eligible for exemption of EMD, DOCUMENTARY EVIDENCE FOR EXEMPTION OF
EMD needs to be submitted.
1.5.5.10.3.2 Submission of Eligibility Documents with respect to Technical Eligibility requirement as
provided under Section 1.6.1.
Non submission of Technical Eligibility documents will lead to the rejection of the bids.
1.5.5.10.4 Technical Evaluation of the bids- The eligible bidders will then be evaluated for Technical
responsiveness as indicated in Section 1.6.1
1.5.5.10.5 The Technically Responsive Bidders may be then asked for opening of Financial Bid. The
Financial bid evaluation will be based on the relevant stated Bid parameter (Rate for
complete analysis of one sample of each product, exclusive of Service Tax). Any
conditional bid, deviating from the bid conditions, will be rejected.
1.5.5.10.6 The Financial Bids of technically qualified/responsive bidders will be opened and after
scrutiny thereof, including inspection of the laboratory, if required, the acceptable rates
for analysis will be decided and communicated.
1.5.5.11 Infirmity / Non-Conformity
The Nodal Authority may waive minor infirmity and/or non-conformity in a bid, provided it does not
constitute any material deviation. The decision of the Nodal Authority as to whether the deviation is
material or not, shall be final and binding on the bidders.
1.5.5.12 Bid Clarification
Wherever necessary, the Nodal Authority may, at its discretion, seek clarification from the Bidders
seeking response by a specified date. If no response is received by this date, the Nodal Authority
shall evaluate the offer as per available information.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
19 | P a g e
1.6 Criteria for Evaluation
1.6.1 Technical Qualification Criteria
1.6.1.1 The Bidder shall be a sole provider (Company including OPC
/Society/Trust/LLP/Partnership) The Service Provider should be registered as a legal entity
such as company registered under Companies Act, Partnership Act, Societies Registration
Act, Trust Act or an equivalent law applicable in the region/state/ country.
1.6.1.2 The analytical testing laboratory shall be situated in Uttar Pradesh and neighboring
states/UTs – Delhi, Haryana, Madhya Pradesh, Himachal Pradesh, Uttarakhand, Rajasthan,
Punjab, Chandigarh, Bihar , Jharkhand and Chhattisgarh.
1.6.1.3 The analytical testing laboratory of the Bidder should be approved under Rule 150B of
Drugs & Cosmetics Act, 1940 and follows all rules under it for the testing of Drugs and
medical devices
1.6.1.4 The analytical testing laboratory of the Biddershould be accredited with National
Accreditation Board, New Delhi for testing of Drugs, Surgical and Suture Items with proper
scope of accreditionand should comply with Schedule L-1 of Drugs and Cosmetic Rules,
1945 (GLP Certificate).
1.6.1.5 The analytical testing laboratory of the Bidder should have a minimum three years of
experience of testing of similar products. Documentary evidence of having analyzed Drugs
/Surgical / Sutures for the last three years with a statement in the Proforma as given in
Appendix C (The decision of the Nodal Authority as to whether the assignment is similar or
not and whether the bidders possess required experience or not, shall be final and binding
on the bidders.)
1.6.1.6 The license of the analytical testing laboratory of the Bidder shouldnot have been
suspended during last three years on account of misreporting. (Appendix G).
1.6.1.7 The analytical testing laboratory of the Bidder should have minimum two functional HPLCs.
1.6.1.8 The Bidders are not blacklisted by the Nodal Authority or by any State Govt. or its
organizations by Govt. of India or its organizationsin last three years (Appendix G).
1.6.1.9 The bidder shall declare all ongoing CBI/criminal litigations it is involved in with any
Government Agency/ State/Central departmentin last three years (Appendix G).
1.6.1.10 Neither the firm nor its personnel should have been convicted in last three years under the
provisions of Drugs and cosmetics Acts, 1940 or Rules framed there under (Appendix G)
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
20 | P a g e
1.6.1.11 Bidder should not have been involved in theft or in non-payment of government dues or
taxes in last three years (Appendix G).
1.6.2 Technically Responsive Bid(s)
All bids meeting the criteria set out in Section 1.6.1 shall be considered as Technically Responsive
and eligible for Financial Bid opening.
1.6.3 Financial Bid Evaluation
1.6.3.1 The Financial Bids of technically qualified/responsive bidders will be opened and after
scrutiny thereof, including inspection of the laboratory, if required, the acceptable rates for
analysis will be decided and communicated to technically qualified bidders.
1.6.3.2 The Financial bid evaluation will be based on the relevant stated Bid parameter (Rate for
complete analysis of one sample of each product, exclusive of service tax). Any conditional
bid, deviating from the bid conditions, will be rejected.Rate quoted by the bidder should
be for complete analysis of the product and not for individual tests that might have to be
performed. List of products is indicated in Appendix K
1.6.3.3 The price quoted shall be firm and shall be quoted in the format as per attached Appendix
K only.
1.6.3.4 Errors & Rectification: Arithmetical errors will be rectified on the following basis: “If there
is a discrepancy between the unit price and the total price that is obtained by multiplying
the unit price and quantity, the unit price shall prevail and the total price shall be
corrected. If there is a discrepancy between words and figures, the amount in words will
prevail”.
1.7 Empanelment Process
1.7.1 Right to Accept Any Bid and to Reject Any or All Bid(s)
Nodal Authority reserves the right to accept or reject any Bid, and to annul the bidding process /
Public procurement process and reject all Bids at any time prior to award of contract, without
thereby incurring any liability to the affected bidder or bidders or any obligation to inform the
affected bidder or bidders of the grounds for Nodal Authority action.
1.7.2 Notification of Award
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
21 | P a g e
1.7.2.1 All the technically qualified bidders shall be invited to match the rate quoted by L1 bidder
and on agreement they shall also be empaneled.
1.7.2.2 The Nodal Authority shall issue the Notice for Award or Letter of Intent/Award of the
Contract to the successful bidder within the bid validity period.
1.7.2.3 The successful bidder will be required to sign and submit the contract unconditionally
within 21 days of receipt of such communication.
1.7.2.4 The Letter of Award (LOA / LOI) will be issued by Director General Medical and Health,
Department of Medical Health & Family, Government of Uttar Pradesh.
1.7.2.5 In case the bidding process / public procurement process has not been completed within
the stipulated period, Nodal Authority, may like to request the bidders to extend the
validity period of the bid.
1.7.2.6 The notification of award will constitute the formation of the Contract. Upon the successful
bidder's furnishing of Performance Security, Nodal Authority will notify each unsuccessful
bidder and return their EMD.
1.7.3 Modification to Contract
The Contract when executed by both the parties shall constitute the entire Contract between the
parties in connection with the jobs / services and shall be binding upon the parties. Modification, if
any, to the contract shall be in writing and with the consent of both the parties.
1.7.4 Performance Security
1.7.4.1 The successful bidder shall furnish a Performance Security in the shape of a FDR/Bank
Guarantee issued by a Nationalized Bank/Scheduled Indian Bank in favor of Director
General of Medical & Health Services, Uttar Pradesh, Lucknow for an amount as specified
in the Bid Data Sheet. The Bank Guarantee shall be as per proforma at “Appendix I” and
will remain in force upto and including 180 (One Hundred and Eighty) days after the period
of contract validity. This shall be submitted within 21 days of receiving of Notice for Award
of Contract, failing which the EMD may be forfeited and the Contract may be cancelled.
1.7.4.2 If the Selected Bidder / Service Provider violates any of the terms and conditions of
contract, the Performance Security shall be liable for forfeiture, wholly or partly, as
decided by the Nodal Authority and the contract may also be cancelled.
1.7.4.3 The Nodal Authority will release the Performance Securitywithout any interest to the
Selected Bidder / Service Provider on successful completion of Contractual term and/or its
obligations.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
22 | P a g e
1.7.5 Signing of Contract
1.7.5.1 After the Nodal Authority notifies the successful bidder that its Bid has been accepted,
Nodal Authority shall enter into a contract, incorporating all clauses, pre-bid clarifications
and the Bid of the bidder between Nodal Authority and the successful bidder.
1.7.5.2 The individual Contracts will be signed between Director General Medical and Health,
Department of Medical Health & Family Welfare, Government of Uttar Pradesh and
selected bidder.
1.7.5.3 The Implementing, Monitoring Authority and Payment Authority will be Director General
Medical and Health, Department of Medical Health & Family Welfare, Government of Uttar
Pradesh.
1.7.6 Compliance of Minimum Wages Act and other Statutory Requirements
The Service Provider shall comply with all the provisions of Minimum Wages Act and other
applicable labor laws. The bidder shall also comply with all other statutory provision including but
not limited to provisions regarding medical education and eligibility criteria of human resources used
by the Service Provider for providing the services, biomedical waste management, bio-safety,
occupational and environmental safety, Drugs & Cosmetics Act, 1940 and requirements for NABL
accredition.
1.7.7 Income Tax Deduction at Source
Income tax deduction at source shall be made at the prescribed rates from the Service Provider’s
invoices / bills. The deducted amount will be reflected in the requisite Form, which will be issued at
the end of the financial year.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
23 | P a g e
1.8 Scope of Work
1.8.1 General Project Overview
The Service Provider will provide the services as per the Drugs and Cosmetics Act, 1940 for analysis
of drugs, surgical and sutures items as provided in Annexure K.
1.8.2 Work Description
The obligations of the Service Provider under this service contract shall include following service
activities and commitments.
1.8.2.1 The testing of drugs, surgical and suture items will be based on the validation of the
protocols as per ICH guidelines.The calibration of the equipment used in the analysis will
be carried out on regular schedules against national /international standards.
1.8.2.2 Chemical, biological, mechanical and physical data including print-outs,
validation/calibration records etc.; must be on records made available as and when
requested.
1.8.2.3 The laboratory should have all necessary instruments/equipments/machines for testing of
drugs with minimum two functional HPLCs.
1.8.2.4 The Service Provider shall perform all the tests mentioned in IP/BP/USP/ISO/BIS/Drugs &
Cosmetics Act. etc., (as the case may be) for each and every sample. The results obtained
in the test should be mentioned in numerical value (wherever possible).
1.8.2.5 If any sample is received in a damaged condition by the laboratory, the sample should not
be analyzed and the information should be sent immediately Director General, Medical &
Health U.P., Lucknow by fax or e-mail.
1.8.2.6 Analytical lab, which has already tested the batch (for manufacturer), the samples will not
be sent to the same lab for testing.
1.8.2.7 The laboratory will not be permitted to outsource any test from other laboratory. Sub
Letting is strictly prohibited.
1.8.2.8 All the samples tested by the laboratory should be preserved at least for three months.
1.8.2.9 Nodal Authority, Contract Signing Authority or his authorized representative(s) shall have
the right to inspect the laboratory before opening of price bid and subsequently as and
when considered appropriate and based on the finding, the bidder may be disqualified or
de-empaneled, as the case may be.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
24 | P a g e
1.8.2.10 Test Reports
1.8.2.10.1 On empanelment, the laboratory should furnish test reports within:
1.8.2.10.1.1 10 days from the receipt of the sample in case of Tablets, Capsules, Pessaries,
Ointments, Powder and Liquid Oral Preparations.
1.8.2.10.1.2 21 days from the receipt of the sample in the case of I.V. Fluids and injectable and other
items requiring test for sterility.
1.8.2.10.2 Every test report must have remarks either as “Standard Quality” or “Not of Standard
Quality” or “Misbranded” or “Spurious”.
1.8.2.10.3 Reports should be attached along with Spectra / Chromatography data sheets if
applicable and it will be considered incomplete if spectra or chromatograms are not
attached.
1.8.2.10.4 Reports should have S.No, Description of tests , Specifications and Results obtained ad
should be signed by authorized approved Technical person.
1.8.2.10.5 “COMPLIES” or “PASSES” in the result column of the report is treated as incomplete
report, if the result has some numerical value.
1.8.2.11 All test reports should be submitted to Director General, Medical & Health U.P., Lucknow
in triplicate.
1.8.3 Operations & Performance Requirements
1.8.3.1 Penalty due to Non-Adherence to Timelines:
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
25 | P a g e
1.8.3.1.1 If the Service Provider requires an extension in time for submission of test report, on
account of occurrence of any hindrance, it shall apply in writing for extension on
occurrence of hindrance but not after the stipulated date of furnishing the test report.
1.8.3.1.2 The Director General, Medical & Health U.P., Lucknow may extend the testing period
with or without liquidated damages in case they are satisfied that the delay in the
submission of test reports is on account of any hindrances.
1.8.3.1.3 In case of delay in furnishing the test report(s), a penalty due to Non-Adherence to the
timeline shall be applied to Service Provider. A penalty as per the below percentage of
each delay will be levied on the monthly payment of each such cases which have non-
adherence to the timeline:
1.8.3.1.3.1.1 Delay upto one fourth period of the prescribed testing period; 2.5%
1.8.3.1.3.1.2 Delay exceeding one fourth but not exceeding half of the prescribed testing period; 5%
1.8.3.1.3.1.3 Delay exceeding half but not exceeding three fourth of the prescribed testing period;
7.5%
1.8.3.1.3.1.4 Delay exceeding three fourth of the prescribed testing period; 10%
Note: Fraction of a day in reckoning period of delay in furnishing the test reportshall be
eliminated if it is less than half a day. The maximum amount of liquidated damages shall be
10%.
1.8.3.2 If the Bidder/Service Provider, as the case may be, is found by the Contract signing
Authority /Nodal Authority to be engaged in misreporting or in violation of conditions of
the contract, such Bidder/ Service provider shall not be eligible to participate in any bid or
RFP issued by the Nodal Authority / Contract Signing Authority for a period of 5 (five) years
from the date such Bidder/ Service provider, as the case may be, is found to have engaged
in misreporting or in violation of conditions of the contract. The bidder/ service provider
shall also be liable for action under criminal law and the matter will be notified to the
concerned Authority for Drug control for suitable action under Drugs and Cosmetics Act
and Rules.
1.9 Payment Terms
1.9.1 The Director General Medical and Health, Department of Medical Health & Family Welfare,
Government of Uttar Pradesh will be the Paying Authority. The Paying Authority
appointedAuthorized Representative(s) will verify the payment claims / invoices of the
Service Provider.
1.9.1.1 The Service Provider will submit the invoice on monthly basis
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
26 | P a g e
1.9.1.2 The Service Provider can submit the claims for verification duly accompanied by evidences
of services provided, on fortnightly basis to the Authorized Representative(s) for
verification purpose.
1.9.1.3 100% Payment will be made as per Invoice supported by final submitted report of each
drug /surgical/suture items.
1.9.1.4 After verification of invoices / claims by the Authorized Representative(s), the Paying
Authority will make the payment within 30 days of verification of the Invoices or after 30
days of resolution of dispute, whichever is later, for all invoices raised.
1.9.1.5 The payment will be subject to all Statutory Taxes, Tax Deducted at Source (TDS), as per
Applicable taxes and laws.
1.9.2 The Service Provider hereby acknowledges and agrees that it is not entitled to anyrevision of
the Payment Terms or other relief from the Paying Authority except in accordance with the
express provisions of this Agreement.
1.9.3 The Paying Authority shall make no advance payment to the Service Provider towards the
cost of analysis.
1.9.4 The Paying Authority shall make no payment to the Service Provider, for the incomplete
analysis or incomplete report submission.Deliberate omission of any critical test will be
viewed seriously and shall invite action against the laboratory as deemed fit Director
General, Medical and Health, UP.
1.9.5 Penalties would apply on payments, as defined in this RFP document, due to non-
conformance to the Operations & Maintenance Performance Requirements
1.10 Other Terms and Conditions of the RFP and Contract
1.10.1 Downstream Work
The Nodal Authority does not guarantee, support or state any the possibility of any downstream
work arising of this contract. Downstream work and its procurement/bidding process strictly follows
the Government of India defined Conflict of Interest clauses. However , if a new drug is introduced
within the contract period, a limited tender process will be conducted between the empaneled
laboratories to finalize its price.
1.10.2 Fraud and Corrupt Practices
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
27 | P a g e
1.10.2.1 The Bidders and their respective officers, employees, agents and advisers shall observe the
highest standard of ethics during the Selection Process. Notwithstanding anything to the
contrary contained in this RFP, the Nodal Authority shall reject a Bid without being liable in
any manner whatsoever to the Bidder, if it determines that the Bidder has, directly or
indirectly or through an agent, engaged in corrupt practice, fraudulent practice, coercive
practice, undesirable practice or restrictive practice (collectively the “Prohibited Practices”)
in the Selection Process. In such an event, the Nodal Authority shall, without prejudice to
its any other rights or remedies, forfeit and appropriate the Bid Security or Performance
Security, as the case may be, as mutually agreed genuine pre-estimated compensation and
damages payable to the Nodal Authority for, inter alia, time, cost and effort of the
Authority, in regard to the RFP, including consideration and evaluation of such Bidder’s Bid.
1.10.2.2 Without prejudice to the rights of the Nodal Authority under Clause above and the rights
and remedies which the Nodal Authority may have under the LOI or the Agreement, if a
Bidder/Service Provider, as the case may be, is found by the Nodal Authority to have
directly or indirectly or through an agent, engaged or indulged in any corrupt practice,
fraudulent practice, coercive practice, undesirable practice or restrictive practice during
the Selection Process, or after the issue of the LOI or the execution of the Agreement, such
Bidder or Service Provider shall not be eligible to participate in any Bid or RFP issued by the
Nodal Authority during a period of 5 (five) years from the date such Bidder or Service
Provider, as the case may be, is found by the Nodal Authority to have directly or through
an agent, engaged or indulged in any corrupt practice, fraudulent practice, coercive
practice, undesirable practice or restrictive practice, as the case may be. The bidder/
service provider shall also be liable for action under criminal law and the matter will be
notified to the concerned Authority for Drug control for suitable action under Drugs and
Cosmetics Act and Rules.
1.10.2.2.1 For the purposes of this Section, the following terms shall have the meaning hereinafter
respectively assigned to them:
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
28 | P a g e
1.10.2.2.1.1 “corrupt practice” means (i) the offering, giving, receiving, or soliciting, directly or
indirectly, of anything of value to influence the action of any person connected with the
Selection Process (for avoidance of doubt, offering of employment to or employing or
engaging in any manner whatsoever, directly or indirectly, any official of the Nodal
Authority who is or has been associated in any manner, directly or indirectly with the
Selection Process or the LOI or has dealt with matters concerning the Agreement or
arising there from, before or after the execution thereof, at any time prior to the expiry
of one year from the date such official resigns or retires from or otherwise ceases to be
in the service of the Nodal Authority, shall be deemed to constitute influencing the
actions of a person connected with the Selection Process); or (ii) save as provided herein,
engaging in any manner whatsoever, whether during the Selection Process or after the
issue of the LOA or after the execution of the Agreement, as the case may be, any
person in respect of any matter relating to the Project or the LOA or the Agreement,
who at any time has been or is a legal, financial or technical consultant/ adviser of the
Nodal Authority in relation to any matter concerning the Project;
1.10.2.2.1.2 “fraudulent practice” means a misrepresentation or omission of facts or disclosure of
incomplete facts, in order to influence the Selection Process;
1.10.2.2.1.3 “coercive practice” means impairing or harming or threatening to impair or harm,
directly or indirectly, any persons or property to influence any person’s participation or
action in the Selection Process;
1.10.2.2.1.4 “undesirable practice” means (i) establishing contact with any person connected with or
employed or engaged by Nodal Authority with the objective of canvassing, lobbying or
in any manner influencing or attempting to influence the Selection Process; or (ii) having
a Conflict of Interest; and
1.10.2.2.1.5 “restrictive practice” means forming a cartel or arriving at any understanding or
arrangement among Bidders with the objective of restricting or manipulating a full and
fair competition in the Selection Process.
1.11 Conflict of Interest
1.11.1.1 A bidder shall not have a conflict of interest that may affect the Selection Process or the
Solution delivery (the “Conflict of Interest”). Any Bidder found to have a Conflict of Interest
shall be disqualified. In the event of disqualification, the Nodal Authority shall forfeit and
appropriate the EMD, if available, a mutually agreed genuine pre-estimated compensation
and damages payable to the Nodal Authority for, inter alia, the time, cost and effort of the
Nodal Authority including consideration of such Bidder’s Bid, without prejudice to any
other right or remedy that may be available to the Nodal Authority hereunder or
otherwise.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
29 | P a g e
1.11.1.2 The Nodal Authority requires that the Service Providerprovides solutions which at all times
hold the Nodal Authority’s interests’ paramount, avoid conflicts with other assignments or
its own interests, and act without any consideration for future work. The Service Provider
shall not accept or engage in any assignment that would be in conflict with its prior or
current obligations to other clients, or that may place it in a position of not being able to
carry out the assignment in the best interests of the Nodal Authority.
1.11.1.3 Without limiting the generality of the above, a Bidder shall be deemed to have a Conflict of
Interest affecting the Selection Process, if:
1.11.1.3.1 the Bidder, or Associates (or any constituent thereof) and any other Bidder, or Associate
(or any constituent thereof) have common controlling shareholders or other ownership
interest; provided that this disqualification shall not apply in cases where the direct or
indirect shareholding or ownership interest of an Bidder, or Associate (or any shareholder
thereof having a shareholding of more than 5 per cent of the paid up and subscribed
share capital of such Bidder or Associate, as the case may be) in the other Bidder or
Associate is less than 5% (five per cent) of the subscribed and paid up equity share capital
thereof. For the purposes of this Clause, indirect shareholding held through one or more
intermediate persons shall be computed as follows:
1.11.1.3.2 where any intermediary controlled by a person through management control or
otherwise, the entire shareholding held by such controlled intermediary in any other
person (the “Subject Person”) shall be taken into account for computing the
shareholding of such controlling person in the Subject Person; where a person does not
exercise control over an intermediary, which has shareholding in the Subject Person, the
computation of indirect shareholding of such person in the Subject Person shall be
undertaken on a proportionate basis; provided, however, that no such shareholding shall
be reckoned under this Sub-clause if the shareholding of such person in the intermediary
is less than 26% (twenty six per cent) of the subscribed and paid up equity shareholding
of such intermediary; or
1.11.1.3.2.1 a constituent of such Bidder is also a constituent of another Bidder; or
1.11.1.3.2.2 such Bidder or its Associate receives or has received any direct or indirect subsidy or
grant from any other Bidder or its Associate; or
1.11.1.3.2.3 such Bidder has the same legal representative for purposes of this Application as any
other Bidder; or
1.11.1.3.2.4 such Bidder has a relationship with another Bidder, directly or through common third
parties, that puts them in a position to have access to each other’s information about,
or to influence the Application of either or each of the other Bidder; or
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
30 | P a g e
1.11.1.3.2.5 there is a conflict among this and otherservices delivery assignments of the Bidder
(including its personnel and other members, if any) and any subsidiaries or entities
controlled by such Bidder or having common controlling shareholders. The duties of the
Service Provider will depend on the circumstances of each case. While providing services
andrelated solutions to the Nodal Authority for this particular assignment, the Service
Provider shall not take up any assignment that by its nature will result in conflict with
the present assignment; or
1.11.1.3.2.6 A firm hired to provide Services for the execution of a project, and its Members or
Associates, will be disqualified from subsequently providing goods or works or services
related to the same project;
1.12 Damages for Mishap/Injury
The Nodal Authority shall not be responsible for damages of any kind or for any
mishap/injury/accident caused to any personnel/property of the bidder while performing duty in the
premises as provided by the Nodal Authority. All liabilities, legal or monetary, arising in that
eventuality shall be borne by the Service Provider.
1.13 Termination of Contract
1.13.1.1 The Nodal Authority may terminate the contract under following circumstances: If the
successful bidder withdraws its bid after its acceptance or fails to submit the required
Performance Securities for the initial contract and or fails to fulfill any other contractual
obligations. In that event, the Nodal Authority will have the right to purchase the services
from next eligible bidder and the extra expenditure on this account shall be recoverable
from the defaulter. The Earnest Money and the Performance Security deposited by the
defaulter shall also be recovered to pay the balance amount of extra expenditure incurred
by the Nodal Authority.
1.13.1.2 The following conditions will be treated as failure to fulfill the key contractual obligation:
1.13.1.2.1 Failure to follow Standard Operating Procedures (SOPs) for performing the tests.
1.13.1.2.2 Non-compliance of minimum essential standards.
1.13.1.2.3 Criminal Indictment and excess and/or forged billing to the Nodal Authority/ Paying
Authority
1.13.1.2.4 Insolvency
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
31 | P a g e
1.13.1.3 The Service Provider will be served a notice of termination by the Nodal Authority and will
be require to respond within 30 days failing which the services will be treated as
Terminated.
1.13.1.4 In that event, the Nodal Authority will have the right to purchase the services from next
eligible bidder and the extra expenditure on this account shall be recoverable from the
defaulter. The earnest money and the performance security deposited by the defaulter
shall also be recovered to pay the balance amount of extra expenditure incurred by the
Nodal Authority.
1.14 Arbitration
1.14.1.1 If dispute or difference of any kind shall arise between the Nodal Authority and the Service
Provider in connection with or relating to the contract, the parties shall make every effort
to resolve the same amicably by mutual consultations. 1.14.1.2 If the parties fail to resolve their dispute or difference by such mutual consultations within
thirty days of commencement of consultations, then either the Nodal Authority or the
Service Provider may give notice to the other party of its intention to commence
arbitration, as hereinafter provided. The applicable arbitration procedure will be as per the
Arbitration and Conciliation Act, 1996 of India and the rules there under. Any statutory
modification thereof for the time being in force shall be deemed to apply to the arbitration
proceedings under this clause. Arbitral Tribunal shall consist of three Arbitrators. Each
Party shall appoint one Arbitrator and both Arbitrator shall appoint Presiding Arbitrator. If
the arbitrator to whom the matter is initially referred is transferred or vacates his office or
is unable to act for any reason, he / she shall be replaced by another person, appointed by
the party appointing the outgoing Arbitrator, to act as the new Arbitrator. Such person
shall be entitled to proceed with the matter from the stage at which it was left by his
predecessor. The Arbitrator shall give reasoned award in case the amount of claim in
reference exceeds Rupees 1 Lakh (Rs.1,00,000/-)
1.14.1.3 Work under the contract, notwithstanding the existence of any such dispute or difference,
shall continue during arbitration proceedings and no payment due or payable by the Nodal
Authority or the Service Provider shall be withheld on account of such proceedings unless
such payments are the direct subject of the arbitration.
1.14.1.4 Reference to arbitration shall be a condition precedent to any other action at law. 1.14.1.5 Venue of Arbitration: The venue of arbitration shall be Lucknow.
1.14.2 Applicable Law and Jurisdiction of Court
The contract shall be governed by and interpreted in accordance with the laws of India for the time
being in force. The Court located at Lucknow shall have jurisdiction to decide any dispute arising out
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
32 | P a g e
of in respect of the contract. It is specifically agreed that no other Court shall have jurisdiction in the
matter.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
33 | P a g e
Appendix A: Forwarding Letter
(To be submitted by Bidder on their Letterhead)
Date: ________________________ To Director General Medical and Health,
Department of Medical Health & Family,
Government of Uttar Pradesh
Lucknow-226001
Subject: Forwarding Letter – RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items, Bid Reference Number _______________________ Dear Sir/Ma’am,
1. We M/s ____________________________ are submitting herewith our bid for
Empanelment of Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures
Items in the state.
We are enclosing Demand Draft No _________________, Dated ___________ (Amount Rs
________________________) towards Bid Document Cost/Fee (ifdocument has been
downloaded from website) and FD/BG No ______________________ Dated ___________
(Amount Rs ________________________) towards Earnest Money Deposit (EMD), drawn on
_______________ Bank in favour of Director General of Medical & Health Services, Uttar
Pradesh payable at Lucknow.
2. We agree to accept all the Terms & Condition stipulated in your Bid enquiry. We also agree
to submit Performance Security as per Section 1.7.5 of Bid Enquiry document.
3. We agree to keep our Price offer valid for the period stipulated in your Bid Enquiry.
Enclosures: 1. 2. 3.
Name and Signature of the Authorized Signatory: _______________________ Name of the Bidder: __________________________
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
34 | P a g e
Seal of the Bidder: _________________
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
35 | P a g e
Appendix B: Bidder’s Information
(To be furnished by Bidder on their Letterhead)
1. Name of the Bidder:
Full Registered Address:
Phone/Mobile Number:
Fax Number:
Email ID:
2. Details of the Bidder:
Date of Inception:
Approval No. & Date:
Issued by:
Valid up to:
3. Details of Certification:
Particulars Details
Certificate of Analytical approval (issued by the State Licensing Authority)
Date of Issue
Name and Designation of Issuing Authority
Date of Renew
Schedule L-1 Certificate (GLP Certificate)
Certificate No.
Date of Issue
NABL Accreditation
Accreditation No.
Scope of Accreditation
Validity of Accreditation
Other Registration Number (if Applicable)
PAN No.
Service Tax Registration No.
EPF Registration No.
ESI Registration No.
Sales Tax Registration No.
VAT Registration No.
Note: (i) Kindly attach attested copy of the certification; (ii) For Other Registration Number (If
Applicable): In case of non-applicability of any of the mentioned Certifications of Registration, the
Bidder shall provide a Declaration on its letter-head stating provisions under law for exemption.
4. Details of Branches (if any):
S.No. Branch Name Branch Address Telephone
Number Mobile
Number Fax
Number Email Id
1.
2.
..
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
36 | P a g e
Note: Kindly add extra rows as per requirement.
5. Type of Entity: OPC/Company/Society/Trust/LLP/Partnership or Any Institution formed
under an act of Parliament or State/UT Legislature of India
6. Whether the Bidder has its own Manufacturing Unit: Yes/No
(If Yes, provide Details of Manufacturing Unit such as Address, Licence Number etc.)
7. Copy of CA Certified or Audited Financial / Account Statements for the last 3 (three) Financial Years (2013-14, 2014-15 and 2015-16).
8. Copy of the Income Tax Returns Acknowledgement for the last 3 (three) Financial Years (2013-14, 2014-15 and 2015-16)
9. Brief write-up about the Bidder. (use extra sheet if necessary)
10. Details of Bidder’s Representative(s):
Particulars Details
Authorized Signatory
Name
Specimen of Signature
Approved Technical Staff who are authorized to Sign the Test Reports
Name
Specimen of Signature
Note: Kindly add extra rows as per requirement.
Date __________________________ Place __________________________ Name and Signature of the Authorized Signatory: _______________________ Name of the Bidder: __________________________ Seal of the Bidder: _________________
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
37 | P a g e
Appendix C: Performance Statement
(For a period of Last 3 years)
(To be furnished by Bidder on their Letterhead)
Name of the Bidder: M/s ________________________________ Address: _________________________________________________________________________
S.No. Types of Sample Analyzed Number of Samples Analyzed during
2013-14 2014-15 2015-16
1. Tablets / Capsules / Pessaries
2. Injectable
3. Liquid Oils
4. Ointments / Creams / Gels
5. Others (Drugs)
6. Surgical (Specify item names)
7. Sutures (Specify types)
Note: Attach extra sheet for above Performa if required.
Name and Signature of the Authorized Signatory: _______________________ Name of the Bidder: __________________________ Seal of the Bidder: _________________
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
38 | P a g e
Appendix D: Personnel Details
(To be furnished by Bidder on their Letterhead)
Name of the Bidder: M/s ________________________________ Address: _________________________________________________________________________
Details of Technical Staff approved by State Licensing Authority:
S.No. Name of Personnel Designation Highest
Qualification No. of years of
Experience Experience Domain*
1.
2.
..
Note: Kindly add extra rows as per requirement.
*Kindly mention experience relevant to analysis of Drugs/Surgical/Sutures.
Name and Signature of the Authorized Signatory: _______________________ Name of the Bidder: __________________________ Seal of the Bidder: _________________
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
39 | P a g e
Appendix E: List of Equipment/Instrument/Apparatus available in Lab
(To be furnished by Bidder on their Letterhead)
Name of the Bidder: M/s ________________________________ Address: _________________________________________________________________________
Details of sophisticated Equipment / Instrument / Apparatus available in the Lab:
S.No. Name of the Equipment / Instrument / Apparatus
Make & Description
Date of Installation
Date of Last Validation
Approved for testing of Drugs from State Licensing Authority
since _____*
1.
2.
..
Note: Kindly add extra rows as per requirement.
*Kindly mention Date (in DD/MM/YYYY format) on which approval has been received.
S.No. Types of Sample Maximum Capacity (in Samples per month)
1. Tablets / Capsules / Pessaries
2. Injectable
3. Liquid Oils
4. Ointments / Creams / Gels
5. Others (Drugs)
6. Surgical Items
7. Sutures (Specify types)
Note: Kindly add extra rows as per requirement.
Name and Signature of the Authorized Signatory: _______________________ Name of the Bidder: __________________________ Seal of the Bidder: _________________
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
40 | P a g e
Appendix F: Microbiological Facilities
(To be furnished by Bidder on their Letterhead)
FACILITIES IN THE MICROBIOLOGICAL SECTION
Name of the Bidder: M/s ________________________________ Address: _________________________________________________________________________
I. LIST OF STOCK CULTURES AVAILABLE:
II. LIST OF EQUIPMENT / APPARATUS AVAILABLE: Approval from State Licensing Authority to permit Microbiological Testing in the Lab
S.No. Name of the Equipment /
Apparatus Date of Make
Model / Serial No.
Date of Installation
Under AMC / CMC
Calibrated on / up to
1.
2.
..
Note: Kindly add extra rows as per requirement.
Name and Signature of the Authorized Signatory: _______________________ Name of the Bidder: __________________________
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
41 | P a g e
Appendix G: Declaration by the Bidder
(To be furnished by the Bidder)
on a Non – Judicial Stamp Paper of Rs. 100 duly attested by Executive Magistrate / Public Notary
1. I, the undersigned, do hereby certify that all the statements made in our bid are true and correct.
2. The undersigned hereby certifies that neither our ________ (Please mention: OPC / Company / Society / Trust / LLP / Partnership) M/s __________________ nor any of its Directors/President/Chairperson/Trustee has abandoned any work for the Government of Uttar Pradesh or any other State Government or Government of India during last three years prior to the date of this Bid.
3. The undersigned also hereby certifies that neither our ________ (Please mention: OPC / Company / Society / Trust / LLP / Partnership) M/s __________________ nor any of its Directors / President / Chairperson / Trustee have been debarred / blacklisted by Government of Uttar Pradesh, or any other State Government or Government of India for any work during last three years prior to the date of this Bid.
4. The undersigned also hereby certifies that neither our ________ (Please mention: OPC / Company / Society / Trust / LLP / Partnership) M/s __________________ nor any of its Directors / President / Chairperson / Trustee have not been involved in theft or in non-payment of Government dues or taxes during last three years prior to the date of this Bid.
5. The undersigned further certifies that a. Our ________ (Please mention: OPC / Company / Society / Trust / LLP / Partnership) M/s
__________________ has not been criminally indicted or punished for any offence, nor is/are any criminal case(s) pending before any Competent Court during last three years prior to date of this Bid; and/or
b. The Directors / President / Chairperson / Trustee of our ________ (Please mention: OPC / Company / Society / Trust / LLP / Partnership) M/s __________________ criminally indicted or convicted of any offence nor is/are any criminal case(s) or pending before any Competent Court during last three years prior to date of this Bid.
c. We have not been found guilty and are not found to be involved in any pending /ongoing CBI or Criminal Litigations. In case of any pending /ongoing litigation(s) of the aforementioned nature, involving our ________ (Please mention: OPC / Company / Society / Trust / LLP / Partnership), we agree to declare the same.
6. The undersigned hereby authorize(s) and request(s) any bank, person, firm, Competent Authority or corporation to furnish pertinent information deemed necessary and requested by Director General of Medical & Health Services, Uttar Pradesh, to verify this statement or regarding my (our) competence and general reputation. a. The undersigned understands and agrees that further qualifying information may be
requested, and agrees to furnish any such information at the request of the Director General Medical and Health, Department of Medical Health & Family, Government of Uttar Pradesh
7. We M/s _______________ having our registered office at ____________________ and the approved drug testing laboratory at _______________________ do hereby declare that, we have carefully read all the conditions of Bid Document of Director General Medical and Health, Department of Medical Health & Family, Government of Uttar Pradesh for the bid for “RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items” and shall abide by all the conditions set forth therein.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
42 | P a g e
8. We further declare that, we possess valid approval for testing of all the Drugs / Surgical / Sutures for which Price Bid have been submitted by us as per Appendix K and permission on Form 37 have been obtained for testing of these items from State Licensing Authority where ever applicable and has not been suspended in past three years on account of misreporting.
9. That the approval to test drugs/surgical & sutures have been obtained on Form 37 bearing No. _____ which is valid/renewed up to _________________.
10. That we are _____________ (Please mention: OPC / Company / Society / Trust / LLP / Partnership) and following are the details of Partners/Directors:
S.No. Name of Partner /
Director Age Present and Permanent
Address
Signed by an Authorized Signatory of the Bidder: ____________________
Title of Officer: ________________________
Name of the Bidder: ____________________ Date: ______________ Place:_____________________________
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
43 | P a g e
Appendix H: Litigation Declaration Proforma
(If Applicable, to be furnished by the Bidder on their Letterhead, wherever applicable)
S. No. Particulars Inputs / Remarks / Details
1. Case Name
2. Case Number
3. Government Order No. and details, if applicable
4. Name of the Court
5. Jurisdiction in which Case was Filed
6. Name(s) of Litigant(s)
7. Describe Nature of Litigation
8. Outcome of the Case
9. Any Additional Information
(Attach extra sheet for above Performa if required). Name and Signature of the Authorized Signatory: _______________________
Name of the Bidder: __________________________
Seal of the Bidder: _________________
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
44 | P a g e
Appendix I: Proforma for Bank Guarantee for EMD & Performance Security
Format for Bank Guarantee for Earnest Money Deposit (EMD)
(To be issued by any Indian Scheduled Commercial Bank)
Whereas M/s ___________________________________________ (hereinafter called the “Bidder”)
has submitted their offer dated _____________ for the supply of under “RFP for Empanelment of
Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items”
(hereinafter called the “Project”) against Nodal Authority’s Bid Reference Number
___________________
KNOW ALL MEN by these presents that WE M/s ____________________________ of __________
having registered office at ____________________________ are bound unto Director General of
Medical & Health Services, Uttar Pradesh (hereinafter called the “Nodal Authority”) in the sum of
Rs. ____________________ (Rupees ______ only) for which payment will and truly to be made in
favour of Director General of Medical & Health Services, Uttar Pradesh, the Bank binds itself, its
successors and assigns by these presents.
Sealed with Common Seal of the said bank this ______ day of ________ 20_____.
THE CONDITIONS OF THIS OBLIGATION ARE:
1) If the Bidder withdraws or amends, impairs or derogates from the Bid in any respect within the Period of Validity of this Bid.
2) If the Bidder having been notified of the acceptance of his Bid by the Nodal Authority during the Period of its Validity, a. Fails to furnish the Performance Security for the due performance of the Contract. b. Fails or refuses to accept/execute the Contract.
We undertake to pay the Nodal Authority up to the above amount upon receipt of its first
written demand, without the Nodal Authority having to substantiate its demand, provided that in
the demand the Nodal Authority will note that amount claimed by it is due to its owing to the
occurrence of one or both the two conditions, specifying the occurred condition or conditions.
This guarantee will remain in force up to and including 45 (Forty-Five) days after the period
of Bid validity and any demand in respect of should reach the Bank not later than the above date.
Signature of the Authorized Officer of the Bank: _________________________________
Name and Designation of the Officer: _________________________________
Seal, Name and Address of the Bank/Branch: _________________________________
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
45 | P a g e
Format for Bank Guarantee for Performance Security
(Tobeissuedby any IndianScheduledCommercialBank)
Date: __________________
To
Director General Medical and Health,
Department of Medical Health & Family,
Government of Uttar Pradesh
Lucknow-226001
Dear Sir/Ma’am,
1. We understand that __________ (the “Service Provider”) has entered into a Service Agreement dated __________ (the “Agreement”), with the Nodal Authority, whereby the Service Provider has undertaken to provide the Services, subject to and in accordance with provisions of the Agreement.
2. The Agreement requires the Service Provider to furnish a Performance Security tothe Nodal Authority in a sum of Rs. __________ (Rupees__________ Lakh) (the “Guarantee Amount”) as security for due and faithfulperformance of its obligations, under and in accordance with the Agreement, during theTerm as per the provisions of the Agreement.
3. We __________, through our Branch at __________ (the “Bank”) have agreed to furnish this Bank Guarantee by way of Performance Security
NOW, THEREFORE, the Bank hereby, unconditionally and irrevocably, guarantees and affirmsas
follows:
1. The Bank hereby unconditionally and irrevocably guarantees the due and
faithfulperformance of the Service Provider’s obligations during the Term, underand in
accordance with the Agreement, and agrees and undertakes to pay to the Nodal
Authority, upon its mere first written demand, andwithout any demur, reservation,
recourse, contest or protest, and without anyreference to the Service Provider, such sum
or sums up to an aggregate sum of theGuarantee Amount as the Nodal Authority shall
claim, without the Nodal Authoritybeing required to prove or to show grounds or reasons
for its demand and/or for thesum specified therein.
2. A letter from the Nodal Authority, under the hand of an Officer dulyauthorized by the
Nodal Authority, that the Service Provider has committed default in the due and faithful
performance of all or any of itsobligations under and in accordance with the Agreement
shall be conclusive, final and binding on the Bank. The Bank further agrees that the Nodal
Authority shall be the sole judge as to whether the Service Provider is in defaultin due and
faithful performance of its obligations during the Term underthe Agreement and its
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
46 | P a g e
decision that the Service Provider is in default shall be final, andbinding on the Bank,
notwithstanding any differences between the Nodal Authority and the Service Provider, or
any dispute between thempending before any court, tribunal, arbitrators or any other
authority or body, or bythe discharge of the Service Provider for any reason whatsoever.
3. In order to give effect to this Guarantee, the Nodal Authority shall be entitled to act as if
the Bank were the principal debtor and any changein the constitution of the Service
Provider and/or the Bank, whether by their absorptionwith any other body or corporation
or otherwise, shall not in any way or manner affectthe liability or obligation of the Bank
under this Guarantee.
4. It shall not be necessary, and the Bank hereby waives any necessity, for the Nodal
Authority to proceed against the Service Provider before presenting to the Bank its
demand under this Guarantee.
5. The Nodal Authority shall have the liberty, withoutaffecting in any manner the liability of
the Bank under this Guarantee, to vary at anytime, the terms and conditions of the
Agreement or to extend the time or period forthe compliance with, fulfilment and/ or
performance of all or any of the obligations ofthe Service Provider contained in the
Agreement or to postpone for any time, and fromtime to time, any of the rights and
powers exercisable by the Nodal Authority against the Service Provider, and either to
enforce or forbear fromenforcing any of the terms and conditions contained in the
Agreement and/or thesecurities available to the Nodal Authority , and the Bank shall not
be releasedfrom its liability and obligation under these presents by any exercise by
theNodal Authority of the liberty with reference to thematters aforesaid or by reason of
time being given to the Service Provider or any otherforbearance, indulgence, act or
omission on the part of the Nodal Authority or of any other matter or thing whatsoever
which under any lawrelating to sureties and guarantors would but for this provision have
the effect ofreleasing the Bank from its liability and obligation under this Guarantee and
the Bankhereby waives all of its rights under any such law.
6. This Guarantee is in addition to and not in substitution of any other guarantee orsecurity
now or which may hereafter be held by the Nodal Authority in respect of or relating to the
Agreement or for the fulfilment,compliance and/or performance of all or any of the
obligations of the Service Providerunder the Agreement.
7. Notwithstanding anything contained hereinbefore, the liability of the Bank under
thisGuarantee is restricted to the Guarantee Amount and this Guarantee will remain in
force for the period specified in paragraph 8 below and unless a demand or claim inwriting
is made by the Nodal Authority on the Bank underthis Guarantee, not later than 6 (six)
months from the date of expiry of thisGuarantee, all rights of the Nodal Authority under
thisGuarantee shall be forfeited and the Bank shall be relieved from its
liabilitieshereunder.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
47 | P a g e
8. The Performance Security shall cease to be in force and effect till thesubsistence of the
Agreement and provided the Service Provider is not inbreach of this Agreement. On
successful completion of Term and uponrequest made by the Service Provider for release
of the Performance Securityalong with the particulars required hereunder, duly certified
by a statutory auditor ofthe Service Provider, the Nodal Authority shall release
thePerformance Security forthwith.
9. The Bank undertakes not to revoke this Guarantee during its currency, except with
theprevious express consent of the Nodal Authority in writing,and declares that it has the
power to issue this Guarantee and the undersigned has fullpowers to do so on behalf of
the Bank.
10. Any notice by way of request, demand or otherwise hereunder may be sent by
postaddressed to the Bank at its above referred Branch, which shall be deemed to
havebeen duly authorized to receive such notice and to effect payment thereof
forthwith,and if sent by post it shall be deemed to have been given at the time when it
ought tohave been delivered in due course of post and in proving such notice, when given
bypost, it shall be sufficient to prove that the envelope containing the notice was
postedand a certificate signed by an officer of the Nodal Authority that the envelope was
so posted shall be conclusive.
11. This Guarantee shall come into force with immediate effect and shall remain in forceand
effect for a period of _________ months or until it is released earlier by the Nodal
Authority pursuant to the provisions of the Agreement.
Signed and sealed this ________ Day of ________ 20_____.
SIGNED, SEALED AND DELIVERED For and on behalf ofthe BANK
by:
Signature:
Name:
Designation:
Address:
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
48 | P a g e
Appendix J: Format for Power of Attorney for Signing of Proposal
(To be furnished by the Bidder)
On a Non – Judicial Stamp Paper of Rs. 100 duly attested by Executive Magistrate / Public Notary
POWER OF ATTORNEY
Know all men by these present, we M/s ____________________ (Name and Address of the
Registered office of the Bidder) do hereby constitute, appoint and authorise Mr. / Ms.
__________________R/o _______________________________ (Name and Address of Residence)
who is presently employed with us and holding the position of ______________ as our Authorised
Representative, to do in our name and on our behalf, all such acts, deeds and things necessary in
connection with or incidental to the bid for “RFP for Empanelment of Approved Analytical Testing
Laboratories for Analysis of Drugs, Surgical & Sutures Items” (the “Project”), including signing and
submission of all documents and providing information / responses to Director General of Medical
& Health Services, Uttar Pradesh, representing us in all matters in connection with our bid for the
said Project.
We hereby agree to ratify all acts, deeds and things lawfully done by our said attorney pursuant to
this Power of Attorney and that all acts, deeds and things done by our aforesaid attorney shall and
shall always be deemed to have been done by us.
This Power of Attorney shall be effective, binding, and operative till ___________, if not revoked
earlier or as long as the said Attorney is in the service of the Company, whichever is earlier.
For: _________________(Signature)
(Name, Title and Address)
Accept: _________________(Signature)
(Name, Title and Address of the authorised representative)
Notes:
1. To be executed by the Single Entity.
2. The mode of execution of Power of Attorney should be in accordance with the procedure, if any,
laid down by the applicable law and the charter documents of the executant(s) and when it is so
required the same should be under common seal affixed in accordance with the required
procedure.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
49 | P a g e
3. Also, wherever required, the executant(s) should submit for verification the extract of the charter
documents and documents such as a resolution / Power of attorney in favour of the Person
executing this Power of Attorney for the delegation of power hereunder on behalf of the
executant(s).
4. For a Power of Attorney executed and issued overseas, the document shall be authenticated by
the Indian Embassy and notarised in the jurisdiction where the Power of Attorney is being
executed. However, a Power of Attorney executed in a country that has signed The Hague
Legalization Convention, 1961 is not required to be authenticated by the Indian Embassy if it
carries a conforming Apostille certificate.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
50 | P a g e
Appendix K: Financial Bid
Terms and conditions of the Price offerings:
1. The Financial Bid Price quoted by the Bidder shall be the “Testing Charge” (which shall be inclusive of all the Applicable Taxes but exclusive of Service Tax). 2. Quote as per the PRICE SCHEDULE provided herein. 3. Each Page of this Appendix shall be duly Signed by the Authorized Signatory of the Bidder and shall be Sealed with Seal of the Bidder.
4. PRICE SCHEDULE: FOR LIST OF DRUGS
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
1 M-1 ACECLOFINAC Tablet 100 mg IP
2 M-2 ACECLOFINAC S.R. Tablet 200mg USP
3 M-3 ASPRIN ENTERIC COATED Tablet 150 mg IP
4 M-4 ASPRIN ENTERIC COATED Tablet 75 mg IP
5 M-5 DICLOFENAC POTASSIUM(Enteric Coated) Tablet 50mg IP
6 M-6 DICLOFENAC DIETHYLAMINE 1PERCENT
METHYL SALICYLATE 10 PERCENT MENTHOL 5 PERCENT
GEL 1%W/W 10% 5% IP
7 M-7 DICLOFENAC SODIUM(Enteric Coated) Tablet 100 mg SR IP
8 M-8 DICLOFENAC SODIUM(Enteric Coated) Tablet 50 mg IP
9 M-9 IBUPROFEN Syrup 100 mg/5 ml IP
10 M-10 IBUPROFEN Tablet 200 mg IP
11 M-11 IBUPROFEN Tablet 400 mg IP
12 M-12 KETOPROFEN Plaster 30mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
51 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
13 M-13 METHYL SALICYLATE 30 PERCENT MENTHOL 10 PERCENT CAMPHOR
GEL 30gm IP
14 M-14 OXACEPROL Capsule 200mg IP
15 M-15 PARACETAMOL Drop 150mg/ml IP
16 M-16 PARACETAMOL Syrup 25 mg/ ml IP
17 M-17 PARACETAMOL Tablet 500 mg IP
18 M-18 PARACETAMOL Tablet 650mg IP
19 M-19 PARACETAMOL DISPERSIBLE Tablet 125 mg IP
20 M-20 PARACETOMOL SUPPOSITORY Tablet 170 mg IP
21 M-21 PARACETOMOL SUPPOSITORY Tablet 80 mg IP
22 M-22 PHLOUROGLUCINOL+
TRIMETHYLPHLOROGLUCINOL TABLET 80mg IP
23 M-23 PIROXICAM Capsule 20 mg IP
24 M-24 TRAMADOL HYDROCHLORIDE Capsule 50 mg IP
25 M-25 ALLUMINIUM HYDROXIDE Gel 3.5% to 4.4% W/w IP
26 M-26 ALLUMINIUM HYDROXIDE Tablet 500 mg IP
27 M-27 DEXARABEPRAZOLE Tablet 10mg IP
28 M-28 DEXARABEPRAZOLE DOMPERIDONE Tablet 10mg,30mgSR IP
29 M-29 ESOMEPRAZOLE Tablet 40 mg IP
30 M-30 ESOMEPRAZOLE MAGNESIUM TRITHYDRATE Tablet 20 mg IP
31 M-31 OMEPRAZOLE Capsule 20 mg. IP
32 M-32 PANTOPRAZOLE Tablet 40 mg IP
33 M-33 RABEPRAZOLE SODIUM DOMPERIDONE Tablet 20mg+30 mg IP
34 M-34 RABEPRAZOLE SODIUM Tablet 20 mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
52 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
35 M-35 RANITIDINE HYDROCHLORIDE Tablet 150 mg IP
36 M-36 RANITIDINE HYDROCHLORIDE Tablet 300 mg IP
37 M-37 SUCRALFATE WITH OXETACAINE SUSPENSION 1 gm/20mg/10ml IP
38 M-38 DICYCLOMINE HYDROCHLORIDE Tablet 20 mg IP
39 M-39 DICYCLOMINE HYDROCHLORIDE Tablet 10 mg IP
40 M-40 DICYLOMINE HCL WITH ACTIVATED
DIMEHICONE Drop 10 mg+40 mg/ml IP
41 M-41 HYOSCINE BUTYL BROMIDE Tablet 10 mg IP
42 M-42 MEFENAMIC ACID WITH DICYCLOMINE HCL Tablet 500 mg+20 mg FDC
43 M-43 URSODEOXYCHOLIC ACID Tablet 150 mg IP
44 M-44 URSODEOXYCHOLIC ACID Tablet 300 mg IP
45 M-45 Abacavir Lamivudine Tablet 600mg+300mg USP
46 M-46 Abacavir Lamivudine Tablet 60mg+30mg USP
47 M-47 ACYCLOVIR Cream 5% W/w IP
48 M-48 ACYCLOVIR Tablet 200 mg IP
49 M-49 ACYCLOVIR Tablet 400 mg IP
50 M-50 ACYCLOVIR Tablet 800 mg IP
51 M-51 AMOXYCILLIN AND POTASSIUM CLAVULANATE
ORAL SUSPENSION dry syrup 200 mg+ 28.5 mg/5 ml IP
52 M-52 AMOXYCILLIN FOR ORAL SUSPENSION dry syrup 25 mg/ml IP
53 M-53 AMOXYCILLIN TRIHYDRATE Capsule 250 mg IP
54 M-54 AMOXYCILLIN TRIHYDRATE Capsule 500 mg IP
55 M-55 AMOXYCILLIN TRIHYDRATE Syrup 25 mg/ml USP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
53 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
56 M-56 AMOXYCILLIN TRIHYDRATE EQUIVALENT TO
AMOXYCILLIN AND CLAVULANATE POTASSIUM EQUIVALENT TO CLAVULANIC ACID
Tablet 500 mg + 125 mg IP
57 M-57 AMOXYCILLIN TRIHYDRATE WITH CLOXACILLIN Capsule 250 mg+250 mg USP
58 M-58 AMOXYCILLIN TRIHYDRATE WITH CLOXACILLIN Tablet 125 mg + 125 mg USP
59 M-59 AMOXYCILLINE TRIHYDRATE WITH
CLAVULANATE Tablet 250 mg+125 mg USP
60 M-60 ATAZANAVIR Capsule 300mg IP
61 M-61 Atazanavir Ritonavir Tablet 300mg+100mg IP
62 M-62 AZITHROMYCIN SUSPENSION 100mg/5ml USP
63 M-63 AZITHROMYCIN Tablet 250 mg IP
64 M-64 AZITHROMYCIN Tablet 500 mg IP
65 M-65 AZITHROMYCIN Tablet 1 gm IP
66 M-66 AZITHROMYCIN Tablet 100 mg IP
67 M-67 CEFADROXIL dry syrup 125 mg/5 ml IP
68 M-68 CEFADROXIL Tablet 500 mg IP
69 M-69 CEFADROXIL DISPERSIBLE Tablet 125 mg IP
70 M-70 CEFADROXIL Tablet 250 mg IP
71 M-71 CEFIXIME TRIHYDRATE dry surup 50mg/5ml IP
72 M-72 CEFIXIME TRIHYDRATE Tablet 100 mg IP
73 M-73 CEFIXIME TRIHYDRATE Tablet 200 mg IP
74 M-74 CEFIXIME TRIHYDRATE Tablet 400 mg IP
75 M-75 CEFPODOXIME Syrup 125 mg/5 ml IP
76 M-76 CEFPODOXIME Tablet 100 mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
54 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
77 M-77 CEFPODOXIME Tablet 200 mg IP
78 M-78 CEFPODOXIME PROXETIL WITH CLAVULANIC
ACID Tablet 200mg+125mg IP
79 M-79 CEFUROXIME AXETIL Tablet 250 mg IP
80 M-80 CEFUROXIME AXETIL Tablet 500 mg IP
81 M-81 CEFUROXIME AXETIL DISPERSABLE Tablet 125 mg IP
82 M-82 CEPHALEXIN Capsule 250 mg IP
83 M-83 CEPHALEXIN Capsule 500 mg IP
84 M-84 CEPHALEXIN drop 100mg/ml
85 M-85 CIPROFLOXACIN HYDROCHLORIDE Tablet 250 mg IP
86 M-86 CIPROFLOXACIN HYDROCHLORIDE Tablet 500 mg IP
87 M-87 CIPROFLOXACIN HYDROCHLORIDE Tablet 750 mg IP
88 M-88 CLOBAZAM Capsule 10mg IP
89 M-89 CLOBAZAM Tablet 5mg IP
90 M-90 CLOBAZAM Tablet 20mg IP
91 M-91 CLOTRIMAZOLE Tablet 100 mg IP
92 M-92 CLOXACILLIN SODIUM Capsule 250 mg IP
93 M-93 Darunavir Tablet 600mg IP
94 M-94 DOXYCYCLINE HYDROCHLORIDE Capsule EQUIVALENT OF 100mg
DOXYCYCLINE IP
95 M-95 DOXYCYCLINE HYDROCHLORIDE Capsule EQUIVALENT OF 200mg
DOXYCYCLINE IP
96 M-96 EFAVIRENZ Tablet 50mg IP
97 M-97 Efavirenz Capsule 200mg IP
98 M-98 Efavirenz Tablet 600mg USP
99 M-99 ENTECAVIR TABLET 0.5mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
55 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
100 M-100
ENTECAVIR TABLET 1mg IP
101 M-101
ERYTHROMYCIN Tablet 250 mg IP
102 M-102
ERYTHROMYCIN DISPERSABLE Tablet 125 mg IP
103 M-103
ERYTHROMYCIN ESTOLATE SUSPENSION 125 mg/5 ml IP
104 M-104
FLUCONAZOLE Tablet 150 mg IP
105 M-105
FLUCONAZOLE Tablet 50 mg IP
106 M-106
GARENOXACIN Tablet 200mg IP
107 M-107
GLICLAZIDE +METFORMIN TABLET 80+500mg IP
108 M-
108 ITRACONZOLE CAPSULE 100mg IP
109 M-109
LEVOFLOXACIN Tablet 500 mg IP
110 M-110
LINEZOLID Tablet 600mg IP
111 M-111
Lopinavir Ritonavir TABLET 100mg+25mg USP
112 M-112
Lopinavir Ritonavir Tablet 200mg+50mg USP
113 M-113
Lopinavir Ritonavir Syrup 80mg+20mg USP
114 M-114
Nevirapine Tablet 50mg
115 M-115
AMOXYCILLIN DISPERSIBLE SCORED TABLET 250mg IP
116 M-116
Nevirapine Tablet 200mg IP
117 M-117
Nevirapine Syrup 10mg/ml IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
56 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
118 M-118
NORFLOXACIN Syrup 100 mg/5 ml
119 M-119
NORFLOXACIN Tablet 200 mg IP
120 M-120
NORFLOXACIN Tablet 400 mg IP
121 M-121
NORFLOXACIN Tablet 800 mg IP
122 M-122
NORFLOXACIN DISPERSABLE Tablet 100 mg IP
123 M-123
OFLOXACIN Tablet 200 mg IP
124 M-124
OFLOXACIN Tablet 400 mg IP
125 M-125
Oseltamivir PHOSPHATE Capsule 75mg IP
126 M-
126 Oseltamivir PHOSPHATE Capsule 45mg IP
127 M-127
Oseltamivir PHOSPHATE Capsule 30mg IP
128 M-128
Oseltamivir PHOSPHATE Syrup 15mg/ml IP
129 M-129
Raltegravir TABLET 400mg IP
130 M-130
Ritonavir Tablet 100mg IP
131 M-131
ROXYTHROMYCIN Tablet 150 mg IP
132 M-132
ROXYTHROMYCIN Tablet 300 mg IP
133 M-133
SOFOSBUVIR TABLET 400mg IP
134 M-134
Stavudine Lamivudine Disp Tablet 6mg+30mg IP
135 M-135
Stavudine Lamivudine Nevirapin Disp Tablet 6mg+30mg+50mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
57 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
136 M-136
Stavudine Lamivudine Tablet 30mg+150mg IP
137 M-137
Stavudine Lamivudine Nevirapine Tablet 30mg+150mg+ 200mg USP
138 M-138
TENOFOVIR +LAMIVUDINE Tablet 300mg + 300mg IP
139 M-139
TENOFOVIR +LAMIVUDINE+EFAVIRENZ Tablet 300mg + 300mg+600 IP
140 M-140
TERBENAFINE HYDROCHLORIDE Tablet 250mg IP
141 M-141
TRIMETHHOPRIM WITH SULPHAMETHOXOZOLE DISPERSABLE
Tablet 20 mg+100 mg IP
142 M-142
TRIMETHHOPRIM WITH SULPHAMETHOXOZOLE DISPERSABLE
Tablet 40 mg+200 mg IP
143 M-
143 TRIMETHOPRIM WITH SULPHAMETHOXOZOLE SUSPENSION 40mg+200mg/5 ml IP
144 M-144
TRIMETHOPRIM WITH SULPHAMETHOXOZOLE Tablet 160mg+800mg IP
145 M-145
TRIMETHOPRIM WITH SULPHAMETHOXOZOLE Tablet 80 mg+400 mg IP
146 M-146
Zidovudine Syrup 10mg/mL IP
147 M-147
Zidovudine Lamivudine Tablet 300mg+150mg (FDC)
148 M-148
Zidovudine Lamivudine Nevirapine Tablet 300mg+150mg+ 200mg IP
149 M-149
Zidovudine Lamivudine Tablet 60mg+30mg FDC
150 M-150
Zidovudine Lamivudine Nevirapin Tablet 60Mg+30mg+50mg FDC
151 M-151
CALCIUM DOBESILATE MONOHYDRATE TABLET 500mg IP
152 M-152
DABIGATRAN ETEXILATE Capsule 110 mg and 150 mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
58 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
153 M-153
GLICLAZIDE TABLET ER600 IP
154 M-154
HEPARIN SODIUM Ointment 200 iu/gm IP
155 M-155
PURIFIED FLAVONOID FRACTION OF RUTACAE MICRONIZED
TABLET 500mg IP
156 M-156
WARFARIN SODIUM Tablet 5 mg IP
157 M-157
CARBAMAZEPINE Tablet 100 mg IP
158 M-158
CARBAMAZEPINE Tablet 200 mg IP
159 M-159
CARBAMAZEPINE Tablet 200 mg CR IP
160 M-160
CARBAMAZEPINE Tablet 400 mg CR IP
161 M-161
CARBAMAZEPINE Syrup 100mg/ml IP
162 M-162
CARBAMAZEPINE Tablet 400mg IP
163 M-163
PHENOBARBITONE Tablet 30 mg IP
164 M-164
PHENOBARBITONE Tablet 60 mg IP
165 M-165
PHENOBARBITONE SODIUM Syrup 20 mg/5 ml IP
166 M-166
PHENYTOIN SODIUM SUSPENSION 25 mg/ml IP
167 M-167
PHENYTOIN SODIUM Tablet 100 mg IP
168 M-168
SODIUM VALPROATE Syrup 40mg/ml IP
169 M-169
SODIUM VALPROATE Tablet 200 mg IP
170 M-170
SODIUM VALPROATE Tablet 300 mg CR IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
59 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
171 M-171
SODIUM VALPROATE Tablet 500 mg CR IP
172 M-172
TOPIRAMATE Tablet 25 mg IP
173 M-173
VALPORIC ACID Syrup 40 mg/ ml IP
174 M-174
DAPAGLIFLOZIN Tablet 5 mg IP
175 M-175
GLIBENCLAMIDE Tablet 2.5 mg IP
176 M-176
GLIBENCLAMIDE Tablet 5 mg IP
177 M-177
GLIBENCLAMIDE Tablet 10 mg IP
178 M-178
GLICLAZIDE Tablet 10 mg IP
179 M-
179 GLICLAZIDE Tablet 60 mg MR IP
180 M-180
GLICLAZIDE Tablet 80 mg IP
181 M-181
GLIMEPRIDE Tablet 1 mg IP
182 M-182
GLIMEPRIDE Tablet 2 mg IP
183 M-183
GLIMEPRIDE Tablet 3 mg. IP
184 M-184
GLIMEPRIDE Tablet 4 mg IP
185 M-185
GLIPIZIDE Tablet 5 mg IP
186 M-186
GLIPIZIDE Tablet 10mg IP
187 M-187
CACIUM ELEMENTAL CAPSULE
elemental form150 mg (in the form of calcium hydroxide and calcium
oxide pretreated with heated algae)
IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
60 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
188 M-188
LINAGLIPTIN Tablet 5 mg BP
189 M-189
METFORMIN HYDROCHLORIDE Tablet 500 mg IP
190 M-190
METFORMIN HYDROCHLORIDE Tablet 1000 mg SR IP
191 M-191
PIOGLITAZONE HCL Tablet 15 mg IP
192 M-192
PIOGLITAZONE HCL Tablet 30 mg IP
193 M-193
SAXAGLIPTIN Tablet 5mg IP
194 M-194
SAXAGLIPTIN WITH METFORMIN HCL Tablet 5mg+500mg IP
195 M-195
SITAGLIPTIN PHOSPHATE Tablet 50 mg IP
196 M-196
SITAGLIPTIN PHOSPHATE Tablet 100 mg IP
197 M-197
VILDAGLIPTIN WITH METFORMIN HCL Tablet 50 mg+500 mg EP
198 M-198
VILDAGLIPTIN Tablet 50 mg EP
199 M-199
VOGLIBOSE Tablet 0.2 mg IP
200 M-200
VOGLIBOSE Tablet 0.3 mg. IP
201 M-201
BROMHEXINE HYDROCHLORIDE Tablet 8mg USP
202 M-202
CETIRIZINE DIHYDROCHLORIDE Syrup 1 mg/ ml IP
203 M-203
CETIRIZINE DIHYDROCHLORIDE Tablet 10 mg IP
204 M-204
CHLORPHENIRAMINE MALEATE Tablet 4 mg IP
205 M-205
DEFLAZACORT Tablet 12 mg. IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
61 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
206 M-206
DEFLAZACORT Tablet 24 mg. IP
207 M-207
DEFLAZACORT Tablet 30 mg IP
208 M-208
DEFLAZACORT Tablet 6 mg IP
209 M-209
DESLORATADINE DISPERSIBLE Tablet 5 mg IP
210 M-210
FEXOFENADINE HYDROCHLORIDE Tablet 120 mg IP
211 M-211
FEXOFENADINE HYDROCHLORIDE Tablet 180 mg IP
212 M-212
HYDROXIZINE HCL Syrup 10 mg/5 ml IP
213 M-213
HYDROXIZINE HCL Tablet 25 mg IP
214 M-
214 LEVOCETIRIZINE DIHYDROCHLORIDE Tablet 5 mg IP
215 M-215
MONTELUKAST SODIUM Tablet 4 mg IP
216 M-216
MONTELUKAST SODIUM Tablet 10 mg IP
217 M-217
MONTELUKAST SODIUM Tablet 5 mg IP
218 M-218
PROMETHAZINE HYDROCHLORIDE+PHOLCODINE
Syrup 1.5mg/ml+1.5mg/ml IP
219 M-219
ALBENDAZOLE SUSPENSION 100 mg/5 ml NHM
220 M-220
ALBENDAZOLE SUSPENSION 200 mg/5 ml NHM
221 M-221
ALBENDAZOLE Tablet 200 mg NHM
222 M-222
ALBENDAZOLE Tablet 400 mg NHM
223 M-223
DIETHYLCARBAMAZINE CITRATE Tablet 100 mg NHM
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
62 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
224 M-224
DIETHYLCARBAMAZINE CITRATE Tablet 50 mg NHM
225 M-225
IVERMECTIN Tablet 12 mg. IP
226 M-226
IVERMECTIN Tablet 6 mg IP
227 M-227
MEBENDAZOLE Tablet 100 mg IP
228 M-228
PIPERAZINE CITRATE Syrup 750 mg /5 ml IP
229 M-229
PYRANTEL PALMOATE Tablet 250 mg IP
230 M-230
CLOFAZIMINE Capsule 100 mg NLEP
231 M-231
CLOFAZIMINE Capsule 50 mg NLEP
232 M-
232 DIAMINODIPHENYL SULPHONE Tablet 50 mg NLEP
233 M-233
ACT 05 TO 08 YEAR(ARTESUNATE ,SULPHADOXINE+PYRIMETHAMINE,PRIMAQUINE
PHOSPHATE ) Tablet
100 mgX3 TAB, 750mg+37.5 mg X 1 TAB 7.5mgX2TAB
NVBDCP
234 M-234
ACT 09 TO 14 YEAR(ARTESUNATE ,SULPHADOXINE+PYRIMETHAMINE,PRIMAQUINE
PHOSPHATE ) Tablet
150 mg,X3 TAB 500mg +25mgX 2 TAB 7.5mg X 4 TAB
NVBDCP
235 M-235
ACT ADULT(ARTESUNATE ,SULPHADOXINE+PYRIMETHAMINE,PRIMAQUINE
PHOSPHATE ) Tablet
200 mgX3 TAB, 750mg+37.5 mg X 1 TAB 7.5mgX6TAB
NVBDCP
236 M-236
ARTEMETHER Capsule 40mg NVBDCP
237 M-237
ARTEMETHER WITH LUMEFATRINE SUSPENSION 20mg+12mg/5ml NVBDCP
238 M-238
ARTEMETHER WITH LUMEFATRINE Tablet 20 mg+120 mg NVBDCP
239 M-239
ARTEMETHER WITH LUMEFATRINE Tablet 40mg+240mg NVBDCP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
63 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
240 M-240
ARTEMETHER WITH LUMEFATRINE Tablet 80mg+480mg NVBDCP
241 M-241
ARTEROLANE MALEATE WITH PIPERAQUINE PHOSPHATE
Tablet 150mg+750mg NVBDCP
242 M-242
ARTESUNATE Tablet 50 mg NVBDCP
243 M-243
CHLOROQUINE PHOSPHATE Syrup 50 mg/5 ml NVBDCP
244 M-244
CHLOROQUINE PHOSPHATE Tablet 250 mg NVBDCP
245 M-245
MEFLOQUINE Tablet 250 mg NVBDCP
246 M-246
PRIMAQUINE PHOSPHATE Tablet 15 mg NVBDCP
247 M-247
PRIMAQUINE PHOSPHATE Tablet 7.5 mg NVBDCP
248 M-248
PRIMAQUINE PHOSPHATE Tablet 2.5 mg NVBDCP
249 M-249
ETHAMBUTOL HYDROCHLORIDE Tablet 1000 mg IP
250 M-250
ETHAMBUTOL HYDROCHLORIDE Tablet 200 mg IP
251 M-251
ETHAMBUTOL HYDROCHLORIDE Tablet 400 mg IP
252 M-252
ETHAMBUTOL HYDROCHLORIDE Tablet 800 mg IP
253 M-253
ISONIAZID Tablet 100 mg IP
254 M-254
ISONIAZID Tablet 300 mg IP
255 M-255
PYRAZINAMIDE Tablet 500 mg IP
256 M-256
PYRAZINAMIDE Tablet 750 mg IP
257 M-257
RIFAMPICIN Capsule 150 mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
64 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
258 M-258
RIFAMPICIN Capsule 450mg IP
259 M-259
RIFAMPICIN Capsule 600mg IP
260 M-260
RIFAMPICIN SUSPENSION 20 mg/ ml IP
261 M-261
RIFAMPICIN ISONIAZIDE CAPSULE/TABLET 450MG/300MG FDC
262 M-262
RIFAMPICIN ISONIAZIDE ETHAMBUTOL PYRAZINAMIDE
KIT 450MG+300MG+800MG+2(750MG) IP
263 M-263
BETAHISTINE DIHYDROCHLORIDE Tablet 16 mg IP
264 M-264
BETAHISTINE DIHYDROCHLORIDE Tablet 24mg IP
265 M-265
CINNARIZINE Tablet 25 mg IP
266 M-266
CINNARIZINE Tablet 75 mg IP
267 M-267
DOMPERIDONE SUSPENSION 1 mg/ml IP
268 M-268
DOMPERIDONE Tablet 10 mg IP
269 M-269
DOXYLAMINE SUCCINATE WITH PYRIDOXINE HCL
Tablet 10 mg/ 10 mg IP
270 M-270
GRANISETRON HYDROCHLORIDE Syrup 1 mg/ml IP
271 M-271
ONDANSETRON HCL Syrup 2 mg base/5 ml IP
272 M-272
ONDANSETRON HCL Syrup 4 mg base/5 ml IP
273 M-273
ONDANSETRON HCL Tablet 4 mg IP
274 M-274
ONDANSETRON HCL Tablet 8mg IP
275 M-275
PROMETHAZINE HYDROCHLORIDE Syrup 5 mg/5 ml IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
65 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
276 M-276
PROMETHAZINE HYDROCHLORIDE Tablet 10 mg IP
277 M-277
PROMETHAZINE HYDROCHLORIDE Tablet 25mg IP
278 M-278
AMIODARONE HYDROCHLORIDE Tablet 200 mg IP
279 M-279
AMIODARONE HYDROCHLORIDE Tablet 100 mg USP
280 M-280
AMLODIPINE BESYLATE Tablet 10 mg IP
281 M-281
AMLODIPINE BESYLATE Tablet 5 mg IP
282 M-282
ATENOLOL Tablet 50 mg IP
283 M-283
ATORVASTATIN CALCIUM Tablet 10 mg IP
284 M-
284 ATORVASTATIN CALCIUM Tablet 20 mg IP
285 M-285
ATORVASTATIN CALCIUM Tablet 40 mg IP
286 M-286
CARVEDILOL Tablet 12.5 mg IP
287 M-287
CARVEDILOL Tablet 3.125 mg IP
288 M-288
CARVEDILOL Tablet 6.25 mg IP
289 M-289
DIGOXIN Syrup 0.05 mg/ml IP
290 M-290
DIGOXIN Tablet 0.25 mg IP
291 M-291
DIGOXIN Tablet 0.5 mg IP
292 M-292
DILTIAZEM HYDROCHLORIDE Tablet 30 mg IP
293 M-293
DILTIAZEM HYDROCHLORIDE Tablet 60 mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
66 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
294 M-294
DILTIAZEM HYDROCHLORIDE Tablet 90mg modified release IP
295 M-295
DILTIAZEM HYDROCHLORIDE Tablet 120 mg modified release IP
296 M-296
ENALPRIL MALEATE Tablet 2.5 mg IP
297 M-297
ENALPRIL MALEATE Tablet 5 mg IP
298 M-298
FENOFIBRATE Tablet 70 mg IP
299 M-299
FENOFIBRATE Tablet 140 mg IP
300 M-300
GLYCERYL TRINITRATE Tablet 6.4mg IP
301 M-301
GLYCERYL TRINITRATE SUBLINGUAL Tablet 0.5mg IP
302 M-302
GLYCERYL TRINITRATE Tablet 0.3mg IP
303 M-303
GLYCERYL TRINITRATE Tablet 2.6 mg IP
304 M-304
HYDROCHLORTHIAZIDE Tablet 12.5mg IP
305 M-305
ISOSORBIDE 5 MONONITRATE Tablet 10 mg IP
306 M-306
ISOSORBIDE 5 MONONITRATE Tablet 20 mg IP
307 M-307
ISOSORBIDE DINITRATE Tablet 5 mg IP
308 M-308
ISOSORBIDE DINITRATE Tablet 10 mg IP
309 M-309
ISOSORBIDE DINITRATE Tablet 20 mg SR
310 M-310
LOSARTAN POTASSIUM Tablet 50 mg IP
311 M-311
LOSARTAN POTASSIUM WITH HYDROCHLOROTHIAZIDE
Tablet 50 mg+12.5 mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
67 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
312 M-312
METHYLDOPA Tablet 250 mg IP
313 M-313
METOPROLOL TARTARATE Tablet 100 mg IP
314 M-314
METOPROLOL TARTARATE Tablet 50 mg IP
315 M-315
METOPROLOL TARTARATE Tablet 25 mg IP
316 M-316
NEBIVOLOL HYDROCHLORIDE Tablet 5 mg IP
317 M-317
NEBIVOLOL HYDROCHLORIDE Tablet 2.5 mg IP
318 M-318
NIFEDIPINE Capsule 5 mg IP
319 M-319
NIFEDIPINE Capsule 10mg IP
320 M-
320 NIFEDIPINE Tablet 5 mg IP
321 M-321
NIFEDIPINE Tablet 10mg IP
322 M-322
NIFEDIPINE Tablet 20 mg
323 M-323
PERINDOPRIL ERBUMINE TABLET 4mg USP
324 M-324
PERINDOPRIL ERBUMINE +AMLODEPINE TABLET 4mg+5mg IP
325 M-325
PERINDOPRIL ERBUMINE +INDAPAMIDE TABLET 4mg+1.2mg IP
326 M-326
PERINDOPRIL ERBUMINE +INDAPAMIDE TABLET 8mg+2.5mg IP
327 M-327
RAMIPRIL Capsule 2.5 mg IP
328 M-328
ROSUVASTIN CALCIUM Tablet 5 mg IP
329 M-329
ROSUVASTIN CALCIUM Tablet 10mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
68 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
330 M-330
ROSUVASTIN CALCIUM Tablet 20 mg IP
331 M-331
S AMLODIPINE BESYLATE Tablet 2.5mg IP
332 M-332
S AMLODIPINE BESYLATE Tablet 5mg IP
333 M-333
TELMISARTAN Tablet 40 mg IP
334 M-334
TELMISARTAN Tablet 80 mg IP
335 M-335
VERAPAMIL HCL Tablet 40 mg IP
336 M-336
VERAPAMIL HCL Tablet 80 mg IP
337 M-338
BUDESONIDE INHALER 100mcg IP
338 M-
339 BUDESONIDE Rotacap 100 mcg IP
339 M-340
BUDESONIDE LEVALBUTEROL RASPULES 1mg+1mg IP
340 M-341
FLUTICASONE Rotacap 250 mcg IP
341 M-342
FLUTICASONE PROPIONATE ROTACAP Rotacap 100 mcg IP
342 M-343
INHALER BECLOMETHASONE DIPROPIONATE AEROSOL
Inhaler 100 mcg/meterd dose IP
343 M-344
BECLOMETHASONE DIPROPIONATE AEROSOL Inhaler 200 mcg/meterd dose IP
344 M-345
BECLOMETHASONE DIPROPIONATE AEROSOL Inhaler 50 mcg/meterd dose IP
345 M-346
SALBUTAMOL AEROSOL Inhaler 100 mcg/meterd dose IP
346 M-347
SALMETROL 25 MCG WITH FLUCTICASONE 250 MCG
Inhaler 25 mcg + 250 mcg IP
347 M-348
SALMETROL 25 MCG WITH FLUCTICASONE125 MCG
Inhaler 25mcg+125mcg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
69 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
348 M-349
SALMETROL 50 MCG WITH FLUCTICASONE250 MCG
Inhaler 50mcg+250mcg IP
349 M-350
IPRATROPIUM BROMIDE RASPULE 500mg IP
350 M-351
IPRATROPIUM BROMIDE Rotacap 40 mcg IP
351 M-352
IPRATROPIUM BROMIDE Solution 250 mcg/ml IP
352 M-353
LEVOSALBUTAMOL Syrup 1 mg/5 ml IP
353 M-354
LEVOSALBUTAMOL 1.25mg IPRATROPIUM BROMIDE 500mcg
Raspule 1.25mg+500mcg IP
354 M-355
SALBUTAMOL Raspule 2.5mg/2.5ml IP
355 M-356
SALBUTAMOL Rotacap 100 mcg IP
356 M-
357 SALBUTAMOL Solution 5 mg/ml IP
357 M-358
SALBUTAMOL SOLUTION FOR NEBULIZATION Solution 3 ml=2.5 mg IP
358 M-359
SALBUTAMOL SULPHATE Tablet 2 mg IP
359 M-360
SALBUTAMOL SULPHATE Tablet 4 mg IP
360 M-361
SALBUTAMOL SULPHATE Tablet 8mg IP
361 M-362
SALMETROL 50 AND FLUTICASONE 250 ROTACAP 50 mcg + 250 mcg IP
362 M-363
THEOPHYLLINE WITH ETOPHYLLINE Tablet 69 mg+231 mg IP
363 M-364
DEFERASIROX DISPERSIBLE Tablet 125MG IP
364 M-365
DEFERASIROX Tablet 250 mg IP
365 M-366
TRANEXAMIC ACID TABLET 250mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
70 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
366 M-367
TRANEXAMIC ACID TABLET 500mg IP
367 M-368
TRANEXAMIC ACID MEFENAMIC ACID TABLET 500mg 250mg FDC
368 M-369
ETHAMSYLATE Tablet 250 mg IP
369 M-370
ETHAMSYLATE Tablet 500 mg IP
370 M-371
CYCLOPHOSPHAMIDE Tablet 50 mg IP
371 M-372
HYDROXYUREA Tablet 1000 mg IP
372 M-373
HYDROXYUREA Tablet 500 mg IP
373 M-374
TAMOXIFEN CITRATE Tablet 10 mg IP
374 M-375
TAMOXIFEN CITRATE Tablet 20 mg IP
375 M-376
PREDENISOLONE Tablet 10 mg IP
376 M-377
PREDENISOLONE Tablet 20 mg IP
377 M-378
PREDENISOLONE Tablet 5 mg IP
378 M-379
ACETAZOLAMIDE Tablet 250 mg IP
379 M-380
FRUSEMIDE Tablet 40 mg IP
380 M-381
INDAPAMIDE Tablet 2.5 mg IP
381 M-382
INDAPAMIDE SR Tablet 1.5 mg IP
382 M-383
SPIRONOLACTONE Tablet 25 mg IP
383 M-384
SPIRONOLACTONE Tablet 50 mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
71 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
384 M-385
SPIRONOLACTONE WITH FRUSEMIDE Tablet 50 mg + 20 mg FDC
385 M-386
TORASEMIDE Tablet 5mg IP
386 M-387
TORASEMIDE Tablet 10 mg IP
387 M-388
TORASEMIDE Tablet 20 mg IP
388 M-389
TORASEMIDE Tablet 100 mg IP
389 M-390
ACECLOFINAC PARACETAMOL CHLOROZOXAZONE
Tablet 100mg\500mg\250mg FDC
390 M-391
ALLOPURINOL Tablet 100 mg IP
391 M-392
EPERISONE TABLET 150mg
392 M-
393 ETORICOXIB Tablet 120 mg IP
393 M-394
ETORICOXIB Tablet 90 mg IP
394 M-395
FABUXOSTAT Tablet 40mg IP
395 M-396
HYDROXY CHLOROQUINE SULPHATE Tablet 200mg IP
396 M-397
LEFLUNOMIDE Tablet 10 mg IP
397 M-398
LEFLUNOMIDE Tablet 20 mg IP
398 M-399
METHOCARBAMOL Tablet 500mg IP
399 M-400
SERRATIOPEPTIDASE Tablet 5 mg IP
400 M-401
SERRATIOPEPTIDASE Tablet 10mg IP
401 M-402
SULPHASALAZINE Tablet 500 mg
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
72 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
402 M-403
THIOCOLCHICOSIDE Tablet 8mg IP
403 M-404
ACTIVE CHARCOAL Tablet BP
404 M-405
BUPROPION HCL Tablet 150mg IP
405 M-406
DISULFIRAM Tablet 2500mg IP
406 M-407
FUROZOLADINE DISPERSIBLE Tablet 100 mg
407 M-408
METRONIDAZOLE Tablet 200 mg IP
408 M-409
METRONIDAZOLE Tablet 400 mg IP
409 M-410
METRONIDAZOLE BENZOATE SUSPENSION 40mg/ml
410 M-411
ORAL REHYDRATION SALTS CITRATE (W.H.O. Formula)
sachet
ORS 20.5Gm. Each sachet Contains Sodium Chloride IP 2.6g Potassium Chloride IP 1.5g Sodium Citrate IP 2.9g 2.9g Anhydrous Dextorse IP 13.5g
for making 1 ltr
IP
411 M-412
ORNIDAZOLE Tablet 500 mg IP
412 M-413
RACECADOTRIL Capsule 100 mg IP
413 M-
414 RACECADOTRIL Tablet 10 mg IP
414 M-415
SACCHAROMYCES BOULARDII Capsule 250mg
415 M-416
SECNIDAZOLE Tablet 1000 mg IP
416 M-417
SPORES OF POLY ANITBIOTIC RESISTANT BACILLUS CLAUSII
Capsule 2 billion spores IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
73 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
417 M-418
SPORES OF POLY ANITBIOTIC RESISTANT BACILLUS CLAUSII
SUSPENSION 2 billion spores IP
418 M-419
TINIDAZOLE Tablet 300 mg IP
419 M-420
TINIDAZOLE Tablet 500 mg IP
420 M-421
ALLYLOSTRENOL Tablet 5 mg USP
421 M-422
CABERGOLINE TABLET 0.25mg IP
422 M-423
ACT 01 TO 04 YEAR(ARTESUNATE ,SULPHADOXINE+PYRIMETHAMINE,PRIMAQUINE
PHOSPHATE ) Tablet
50 mg,X3 TAB 500mg +25mgX 1 TAB 7.5mg X 1 TAB
NVBDCP
423 M-424
CLOMIPHENE CITRATE Tablet 25 mg IP
424 M-425
CLOMIPHENE CITRATE Tablet 50 mg IP
425 M-426
CLOTRIMAZOLE VAGINAL Tablet 100 mg (WITH APPLICATOR) IP
426 M-427
CLOTRIMAZOLE VAGINAL Tablet 200 mg (WITH APPLICATOR) IP
427 M-428
CLOTRIMAZOLE VAGINAL Tablet 500 mg (WITH APPLICATOR) IP
428 M-429
CONJUGATED OESTROGENS Tablet 0.625 mg IP
429 M-430
CONJUGATED OESTROGENS Tablet 1.25 mg IP
430 M-431
DANAZOL Capsule 100 mg IP
431 M-432
DANAZOL Capsule 200 mg IP
432 M-433
DANAZOL Capsule 50 mg IP
433 M-434
DINOPROSTONE Tablet 0.5 mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
74 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
434 M-435
DYDROGESTERONE Tablet 10 mg IP
435 M-436
DYDROGESTERONE Tablet 5 mg IP
436 M-437
ETHINYLOESTRADIOL Tablet 0.01 mg IP
437 M-438
ETHINYLOESTRADIOL Tablet 0.05 mg IP
438 M-439
ETHINYLOTSTRADIOL WITH NORGESTREL Tablet 0.25 mg+0.05mg IP
439 M-440
ETHINYLOUSTRADIOL WITH LEVONORGESTREL Tablet 0.03 mg+0.15 mg IP
440 M-441
ISOXUPRIME HYDROCHLORIDE Tablet 10 mg IP
441 M-442
ISOXUPRIME HYDROCHLORIDE Tablet 20 mg IP
442 M-
443 LABETALOL HCL Tablet 100 mg IP
443 M-444
LABETALOL HCL Tablet 200 mg IP
444 M-445
LABETALOL HCL Tablet 50 mg IP
445 M-446
LEVONORGESTROL Tablet 1.5 mg IP
446 M-447
MEDROXYPROGESTRONE Tablet 10 mg IP
447 M-448
METHYLERGOMETRINE MALEATE Tablet 0.125 mg IP
448 M-449
MIFEPRISTONE Tablet 200 mg IP
449 M-450
MISOPROSTOL Tablet 200 mcg IP
450 M-451
MISOPROSTOL Tablet 100 mcg IP
451 M-452
MISOPROSTOL Tablet 25 mcg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
75 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
452 M-453
NORETHISTERONE Tablet 5 mg IP
453 M-454
PGE 2 DINOPROSTONE Gel 0.5 mg IP
454 M-455
POVIDINE IOIDINE VAGINAL Tablet 200 mg with applicator IP
455 M-456
PROGESTERON SOFT GELATIN MICRONISED Capsule 100 mg IP
456 M-457
PROGESTERON SOFT GELATIN MICRONISED Capsule 200 mg IP
457 M-458
PROGESTERON SOFT GELATIN MICRONISED Capsule 400 mg IP
458 M-459
RITODRINE HYDROCHLORIDE Tablet 10 mg IP
459 M-460
SULBUTIAMINE TABLET 200mg IP
460 M-461
XANTHINOL NICOTINATE Tablet 150 mg IP
461 M-462
XANTHINOL NICOTINATE (RETARD TABLET) Tablet 500 mg IP
462 M-463
BUDESONIDE HCL nasal spray 100 mcg IP
463 M-464
BUDESONIDE HCL nasal spray 200 mcg IP
464 M-465
Chloramphenicol 5% w/v Benzocaine 1%w/v Ear Drop 5% w/v+ 1% w/v IP
465 M-466
ACT 00 TO 01 YEAR(ARTESUNATE ,SULPHADOXINE+PYRIMETHAMINE, )
Tablet 25 mgX3 TAB 250mg +12.5mgX 1
TAB NVBDCP
466 M-467
CIPROFLOXACIN HYDROCHLORIDE Eye Drop 0.3% w/v IP
467 M-468
CLOTRIMAZOLE Ear Drop 1% W/v IP
468 M-469
Clotrimazole 1%+ Lignocaine HCL2% w/v Ear Drop 1%+2%w/v IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
76 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
469 M-470
FLUTICASONE PROPIONATE nasal spray 100 mcg IP
470 M-471
FLUTICASONE PROPIONATE nasal spray 250 mcg IP
471 M-472
FLUTICASONE PROPIONATE nasal spray 50 mcg IP
472 M-473
Gentamicin Sulphate 0.3%w/v+ Betamethasone0.1%w/v
Ear Drop 0.3% w/v+0.1% w/v IP
473 M-474
LIGNOCAINE HCL SPRAY 15% W/W IP
474 M-475
PARADICHLOROBENZEN 2% CHLOROBUTOL TURPENTINE OIL BENZOCAINE
EAR DROP 2%, 5%, 15%, 2.7%,W/V IP
475 M-476
SODIUM CHLORIDE Nasal Drop 0.009 IP
476 M-477
Xylometazoline HCL Nasal Drop 0.05%w/v IP
477 M-478
ACYCLOVIR eye ointment 3% w/w IP
478 M-479
ATROPINE SULPHATE eye ointment 1.0% w/w atropine sulphate IP
479 M-480
ATROPINE SULPHATE Eye Drop 1% W/v IP
480 M-481
CARBOXYMETHYL CELLULOSE SODIUM Eye Drop 0.5% W/v IP
481 M-482
CARBOXYMETHYL CELLULOSE SODIUM Eye Drop 1% W/v IP
482 M-483
CHLORAMPHENICOL eye applicap 1% W/w IP
483 M-484
CHLORAMPHENICOL Eye Drop 0.5% W/v IP
484 M-485
CYCLOPENTOLATE HCL EYE DROP 1%W/V IP
485 M-486
DEXAMETHASONE WIYH NEOMYCIN EYE DROP 0.1%+0.5% IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
77 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
486 M-487
FLUCONAZOLE Eye Drop 0.3% w/v IP
487 M-488
FLURBIPROFEN SODIUM Eye Drop 0.03% w/v IP
488 M-489
GENTAMYCIN EYE/Ear Drop 0.003 IP
489 M-490
LIGNOCAINE HCL TOPICAL 4%W/W BP
490 M-491
METHYLCELLULOSE SOLUTION FOR INTRA OPERATING USE
Solution 0.02 IP
491 M-492
MOXIFLOXACIN HYDROCHLORIDE Eye Drop 0.5% W/v IP
492 M-493
NAPHZOLINE NITRATE BORIC ACID SODIUM CHLORIDE ZINC SULPHATE
Eye Drop 0.056% w/v+1.25% w/v+0.5%
w/v+0.12% w/v FDC
493 M-494
PHENYLEPHRINE HYDROCHLORIDE Eye Drop 10% w/v IP
494 M-495
PILOCARPINE NITRATE Eye Drop 1% W/v IP
495 M-496
PILOCARPINE NITRATE Eye Drop 2% W/V IP
496 M-497
POTASSIUM IODIDE SODIUM CHLORIDE EYE DROP 1%w/v 0.83%w/v IP
497 M-498
PREDENISOLONE SODIUM PHOSPHATE Eye Drop 1.0% w/v IP
498 M-499
SULPHACETAMIDE SODIUM Eye Drop 10% w/v IP
499 M-500
SULPHACETAMIDE SODIUM Eye Drop 20% w/v IP
500 M-501
SULPHACETAMIDE SODIUM Eye Drop 30% w/v IP
501 M-502
TIMOLOL MALEATE Eye Drop 0.25% W/v IP
502 M-503
TIMOLOL MALEATE Eye Drop 0.5% W/v IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
78 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
503 M-504
TOBRAMYCIN Eye Drop 0.3% w/v IP
504 M-505
TROPICAMIDE Eye Drop 1%W/V IP
505 M-506
TRYPAN BLUE Dye 0.6mg/ml IP
506 M-507
CHOLINE SALICYLATE BEZALKONIUMCHLORIDE LIGNOCAINE HYDROCHLORIDE
Gel 8.7%W/W,0.01%W/W,2%W/W FDC
507 M-508
CHLORHEXIDINE GLUCONATE SOLUTION Solution 0.2% w/v IP
508 M-509
POVIDINE IOIDINE LIQUID 1%W/V IP
509 M-510
CLOTRIMAZOLE ORAL MOUTH PAINT Solution 1%W/V IP
510 M-511
B COMPLEX Tablet
VITAMIN B1 5 MG THIAMINE HYDROCHLORIDE VITAMIN B2
5MG RIBOFLAVIN VITAMIN B6 2MG PYRIDOXINE
HYDROCHLORIDE VITAMIN B3 NICOTINAMIDE 50 MG VITAMIN B5 CALCIUM PANTOTHENATE 5
MG
IP
511 M-512
BIOTIN (B7) Tablet 5 mg
512 M-513
CALCITRIOL SOFT GELATIN CAPSULE Capsule 0.25 mcg IP
513 M-
514 CALCIUM CARBONATE WITH VITAMIN D3 Tablet 1250mg+250IU IP
514 M-515
CALCIUM CARBONATE WITH VITAMIN D3 SUSPENSION 625+125IU/5ml IP
515 M-516
CALCIUM CARBONATE WITH ALPHA CALCIDOL Capsule 625 mg+0.25 mcg IP
516 M-517
CALCIUM LACTATE Tablet 300 mg NHM
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
79 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
517 M-518
CHOLECALCIFEROL Nano Spray/Drop 60000IU/spray IP
518 M-519
DEFERASIROX Tablet 500MG IP
519 M-520
ETHAMSYLATE +TRANEXANIC ACID Tablet 250mg+250MG IP
520 M-521
BARIUM SULPHATE MIXED READY TO USE SUSPENSION
SUSPENSION 95% w/v IP
521 M-522
FOLIC ACID (B9) Tablet 400mcg IP
522 M-523
IDEBENONE Tablet 30 mg IP
523 M-524
IRON AND FOLIC ACID IFA LARGE CONTAINING DRIED FERROUS SULPHATE EQ TO FERROUS
IRON 100 MG AND FOLIC ACID 1/2 MG Tablet
100 mg+0.5 mg RED SUGAR COATED
NHM
524 M-525
IRON AND FOLIC ACID IFA LARGE CONTAINING DRIED FERROUS SULPHATE EQ TO FERROUS
IRON 45 MG AND FOLIC ACID 0.4MG Tablet
45 mg+0.4 mg PINK IFA WIFS JUNIOR
NHM
525 M-526
IRON AND FOLIC ACID IFA SMALL CONTAINING DRIED FERROUS SULPHATE EQ TO FERROUS
IRON 20 MG AND FOLIC ACID 01 MG Tablet 20 mg + 0.1 mg NHM
526 M-527
IRON AND FOLIC ACID CONTAINING DRIED FERROUS SULPHATE IP
Tablet
equivalent to ferrous iron 100 mg & folic acid 0.5 mgIFA WIFS LARGE
BLUE COLOURED INDIGO CARMINE
NHM
527 M-528
IRON WITH FOLIC ACID Syrup 20 mg+100 mcg/ml NHM
528 M-529
IRON WITH FOLIC ACID Syrup 20 mg+100 mcg/ml NHM
529 M-530
RIBOFLAVIN (B2) Tablet 100mg IP
530 M-531
PYRIDOXINE HYDROCHLORIDE (B6) Tablet 100 mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
80 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
531 M-532
NIACINAMIDE (B3) Tablet 500 mg IP
532 M-533
CALCIUM PANTOTHENATE (B5) Tablet 500 mg IP
533 M-534
POVIDIONE IODINE SOLUTION Solution 7.5% w/v IP
534 M-535
METHYLECOBALAMINE FOR SUBLINGUAL USE Tablet 1500 mcg BP
535 M-536
METHYLCOBALAMINE (B12) Tablet 500 mcg IP
536 M-537
THIAMINE HYDROCHLORIDE (B1) Tablet 100mg IP
537 M-538
STREPTOCOCCUS FAECALIS+CLOSTRIDIUM BUTYRICUM+BACILLUS MESENTERICUS
Capsule
60 MIllions spores 4 Millions Spores 2 Millions Spores
100 Millions Sproes
IP
538 M-539
STREPTOCOCCUS FAECALIS+CLOSTRIDIUM BUTYRICUM+BACILLUS MESENTERICUS
SYRUP
30 MIllions spores 2 Millions Spores 1 Millions Spores 50 Millions Sproes
IP
539 M-540
VITAMIN A AS ALL TRANS ISOMER OF RETINOL 30 MGSOFT GELATIN APPLICAP
APPLICAP 100000 IU IP
540 M-541
DISODIUM HYDROGEN CITRATE Syrup 1.53G/5ML IP
541 M-542
ZINC SULPHATE DISPERSIBLE Tablet eq. to elemental zinc 20mg NHM
542 M-
543 BISACODYL ENTERIC COATED Tablet 5 mg IP
543 M-544
BISACODYL ENTERIC COATED Tablet 10 mg IP
544 M-545
ENEMA GLYCERIN SODIUM CHLORIDE TUBE 15% W/w+15% W/v IP
545 M-546
LACTULOSE Syrup 3.325gm/5ml IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
81 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
546 M-547
PARAFFIN LIQUID 100%v/v IP
547 M-548
PARAFFIN LIQUID 100%v/v IP
548 M-549
ALPRAZOLAM Tablet 0.25 mg IP
549 M-550
ALPRAZOLAM Tablet 0.5 mg IP
550 M-551
AMISULPRIDE Tablet 50 mg IP
551 M-552
AMISULPRIDE Tablet 100 mg IP
552 M-553
AMISULPRIDE Tablet 200mg IP
553 M-554
AMITRIPTYLINE HCL Tablet 10mg IP
554 M-
555 AMITRIPTYLINE HCL Tablet 25mg USP
555 M-556
AMITRIPTYLINE HYDROCHLORIDE Tablet 50 mg IP
556 M-557
AMITRIPTYLINE HYDROCHLORIDE Tablet 75 mg IP
557 M-558
ARIPIPRAZOLE Tablet 10 mg IP
558 M-559
ARIPIPRAZOLE Tablet 15 mg IP
559 M-560
ATOMOXETINE Tablet 10mg USP
560 M-561
ATOMOXETINE Tablet 25mg USP
561 M-562
BLONANSERIN Tablet 8mg IP
562 M-563
CEPHALEXIN Dry Syrup 125mg/5ml IP
563 M-564
CHLORPROMAZINE Tablet 100mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
82 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
564 M-565
CLOMIPRAMINE Tablet 25mg IP
565 M-566
CLOMIPRAMINE Tablet 50mg
566 M-567
CLONAZEPAM Tablet 0.25 mg IP
567 M-568
CLONAZEPAM Tablet 0.5 mg IP
568 M-569
CLONAZEPAM Tablet 2 mg IP
569 M-570
CLOZAPINE Tablet 100mg IP
570 M-571
CLOZAPINE Tablet 75mg IP
571 M-572
DESVENLAFAXINE SUCCINATE Tablet 25mg IP
572 M-
573 DESVENLAFAXINE SUCCINATE Tablet 50mg IP
573 M-574
DIVALPROEX SODIUM Tablet 250mg IP
574 M-575
DIVALPROEX SODIUM Tablet 500mg IP
575 M-576
DIVALPROEX SODIUM Tablet 750mg IP
576 M-577
DIVALPROEX SODIUM Tablet 1000mg IP
577 M-578
DIAZEPAM Tablet 5 mg IP
578 M-579
DONEPEZIL HYDROCHLORIDE Tablet 10mg IP
579 M-580
DONEPEZIL HYDROCHLORIDE Tablet 5mg IP
580 M-581
DOTHIEPIN HYDROCHLORIDE Tablet 25mg IP
581 M-582
DOTHIEPIN HYDROCHLORIDE Tablet 100mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
83 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
582 M-583
DULOXEITINE HYDROCHLORIDE Tablet 20 mg IP
583 M-584
DULOXEITINE HYDROCHLORIDE Tablet 30 mg IP
584 M-585
ESCITALOPRAM Tablet 5 mg IP
585 M-586
ESCITALOPRAM Tablet 10 mg IP
586 M-587
ESCITALOPRAM Tablet 20mg IP
587 M-588
ETIZOLAM Tablet 0.25mg IP
588 M-589
ETIZOLAM Tablet 0.5mg IP
589 M-590
ETIZOLAM Tablet 1mg IP
590 M-
591 FLUNARIZINE Tablet 10 mg IP
591 M-592
FLUNARIZINE Tablet 5mg IP
592 M-593
CLONAZEPAM Tablet 1 mg IP
593 M-594
FLUOXETINE HYDROCHLORIDE Capsule 20 mg IP
594 M-595
FLUOXETINE HYDROCHLORIDE Capsule 40 mg IP
595 M-596
FLUPHENAZINE DECANOATE Tablet 25mg IP
596 M-597
FLUVOXAMINE MALEATE Tablet 100mg IP
597 M-598
HALOPERIDOL Tablet 0.25 mg IP
598 M-599
HALOPERIDOL Tablet 0.5 mg IP
599 M-600
HALOPERIDOL Tablet 1.5 mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
84 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
600 M-601
HALOPERIDOL Tablet 5mg IP
601 M-602
HALOPERIDOL Tablet 10mg IP
602 M-603
IMIPRAMINE Tablet 25mg IP
603 M-604
IMIPRAMINE Tablet 75mg IP
604 M-605
LAMOTRIGINE Tablet 100mg IP
605 M-606
LAMOTRIGINE Tablet 25mg IP
606 M-607
LAMOTRIGINE Tablet 50mg IP
607 M-608
LEVETIRACETAM Tablet 250mg IP
608 M-
609 LEVETIRACETAM Tablet 500mg IP
609 M-610
LEVODOPA CARBIDOPA Tablet 100mg/10mg FDC
610 M-611
LEVODOPA WITH CARBIDOPA Tablet 250 mg/25 mg FDC
611 M-612
LITHIUM CARBONATE Tablet 300mg BP
612 M-613
LITHIUM CARBONATE SR Tablet 400 mg BP
613 M-614
LORAZEPAM Tablet 1mg IP
614 M-615
LORAZEPAM Tablet 2 mg IP
615 M-616
LORAZEPAM Tablet 3mg IP
616 M-617
MEMATINE HYDRO CHLORIDE Tablet 5mg IP
617 M-618
MEMATINE HYDRO CHLORIDE Tablet 10mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
85 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
618 M-619
MIRTAZAPINE Tablet 7.5mg IP
619 M-620
MIRTAZAPINE Tablet 30 mg IP
620 M-621
MIRTAZAPINE Tablet 15mg IP
621 M-622
NICERGOLINE Tablet 5 mg USP
622 M-623
NALTREXONE HCL Tablet 50mg IP
623 M-624
NITRAZEPAM Tablet 5mg IP
624 M-625
NITRAZEPAM Tablet 10mg IP
625 M-626
OLANZAPINE Tablet 2.5 mg IP
626 M-
627 OLANZAPINE Tablet 5 mg IP
627 M-628
OLANZAPINE Tablet 10mg IP
628 M-629
OLANZAPINE Tablet 20 mg
629 M-630
OXCARBAZEPINE Tablet 300mg IP
630 M-631
PAROXETINE HCL Tablet 25mg
631 M-632
PAROXETINE HCL Tablet 10mg IP
632 M-633
PAROXETINE HCL Tablet 20mg IP
633 M-634
PAROXETINE HCL Tablet 30mg IP
634 M-635
PIRACETAM Tablet 800mg IP
635 M-636
PRAMIPEXOLE DIHYDROCHLORIDE Tablet 0.5mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
86 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
636 M-637
PROPANOLOL HYDROCHLORIDE Tablet 10mg IP
637 M-638
PROPANOLOL HYDROCHLORIDE Tablet 20mg IP
638 M-639
PROPANOLOL HYDROCHLORIDE Tablet 40mg IP
639 M-640
PROCHLORPERAZINE MALEATE Tablet 5 mg IP
640 M-641
QUETIAPINE FUMARATE Tablet 200mg IP
641 M-642
QUETIAPINE FUMARATE Tablet 100mg IP
642 M-643
QUETIAPINE FUMARATE Tablet 50 mg IP
643 M-644
QUETIAPINE FUMARATE Tablet 25 mg IP
644 M-
645 RISPERIDONE Tablet 1 mg IP
645 M-646
RISPERIDONE Tablet 2 mg IP
646 M-647
RISPERIDONE Tablet 3 mg. IP
647 M-648
RISPERIDONE Tablet 4 mg IP
648 M-649
RIVASTIGMINE Tablet 1.5mg IP
649 M-650
RIVASTIGMINE Tablet 3mg IP
650 M-651
RIVASTIGMINE Tablet 4.5mg
651 M-652
SERTRALINE HYDROCHLORIDE Tablet 25mg IP
652 M-653
SERTRALINE HYDROCHLORIDE Tablet 50 mg IP
653 M-654
SERTRALINE HYDROCHLORIDE Tablet 100 mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
87 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
654 M-655
THIORIDAZINE Tablet 25mg IP
655 M-656
THIORIDAZINE Tablet 50mg IP
656 M-657
TIANEPTINE Tablet 12.5mg IP
657 M-658
TIAPRIDE Tablet 50mg IP
658 M-659
TOPIRAMATE Tablet 100mg IP
659 M-660
TOPIRAMATE Tablet 50mg IP
660 M-661
TRIFLUOPERAZINE HYDROCHLORIDE Tablet 5mg IP
661 M-662
TRIFLUOPERAZINE HYDROCHLORIDE Tablet 10mg IP
662 M-
663
TRIFLUOPERAZINE TRIHEXYPHENIDYL HCL
CHLORPROMAZINE Tablet 5 mg + 2 mg + 50mg FDC
663 M-664
TRIHEXYPHENIDYL HYDROCHLORIDE Tablet 2 mg IP
664 M-665
TRIHEXYPHENIDYL HYDROCHLORIDE Tablet 5mg IP
665 M-666
ZOLPIDEM TARTARATE Tablet 5 mg IP
666 M-667
ZOLPIDEM TARTARATE Tablet 10 mg IP
667 M-
668 ZONISAMIDE Tablet 100mg IP
668 M-669
BENZYL BENZOATE APPLICATION application 25% w/w IP
669 M-670
BETAMETHASONE SODIUM PHOSPHATE Cream 0.1% W/w IP
670 M-671
BETAMETHASONE SODIUM PHOSPHATE Cream 0.05% W/w IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
88 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
671 M-672
CLINDAMYCIN GEL 1% W/W IP
672 M-673
CLOTRIMAZOLE Cream 1% W/w IP
673 M-674
CLOTRIMAZOLE Cream 2% w/w IP
674 M-675
CLOTRIMAZOLE Powder 1% W/w
675 M-676
Beclomethasone Dipropionate; Lidocaine Hydrochloride ; Phenylephrine Hydrochloride
Cream 0.025%+2.5%+0.1% IP
676 M-677
Beclomethasone Dipropionate; Lidocaine Hydrochloride ; Phenylephrine Hydrochloride
Ointment 0.05%+2.5%+0.1% IP
677 M-678
COAL TAR KETACONAZOLE Solution 4% w/v+2% w/v IP
678 M-
679 COAL TAR lotion 5% w/v IP
679 M-680
CLOTRIMAZOLE BECLOMETHASONE DIPROPIONATE
Cream 0.1% W/w+0.025% W/w IP
680 M-681
FRAMYCETIN SULPHATE Cream 1% W/w IP
681 M-682
FRAMYCETIN SULPHATE Cream 1% W/w IP
682 M-683
FRAMYCETIN SULPHATE DEXAMETHASONE ACETATE
CREAM 1%W/W+0.1%w/w IP
683 M-
684 FUSIDIC ACID OINT Ointment 0.02 IP
684 M-685
GAMA BENZENE HEXACHLORIDE LOTION lotion 1% W/v IP
685 M-686
METHYLROSANILINIUM CHLORIDE(GENTION VIOLET) SOLUTION/PAINT
Solution 0.25% W/v IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
89 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
686 M-687
METHYLROSANILINIUM CHLORIDE(GENTION VIOLET) SOLUTION/PAINT
Solution 0.5% w/w IP
687 M-688
GRISEOFULVIN Tablet 125mg IP
688 M-
689 GRISEOFULVIN Tablet 250mg IP
689 M-690
GRISEOFULVIN Tablet 375mg IP
690 M-691
HYDROCORTISONE CREAM Cream 0.005 IP
691 M-692
HYDROCORTISONE CREAM Cream 0.01 IP
692 M-693
ISOTRETINOIN Capsule 20 mg IP
693 M-694
METHOXASALEN Tablet 10 mg IP
694 M-695
METRONIDAZOLE Gel 1% W/w IP
695 M-696
MICONAZOLE NITRATE Gel 2% w/w IP
696 M-697
MUPIROCIN CREAM 2% W/W IP
697 M-698
RECOBINANT HUMAN EPIDERMAL GROWTH FACTOR GEL
GEL 15mg IP
698 M-699
NEOMYCINE+POLYMYXINE B SULPHATE & BACITRACIN ZINC
POWDER 3400Units+5000Units+400Units IP
699 M-
700 PERMETHRIN Cream 5% W/w IP
700 M-701
PODOPHYLINE TINCTURE lotion 25% w/v IP
701 M-702
POVIDIONE IODINE Powder 5% W/w IP
702 M-703
POVIDIONE IODINE SOLUTION Solution 10% eq. to 1% iodine IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
90 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
703 M-704
POVIDIONE IODINE SOLUTION Solution 5% w/v IP
704 M-705
POVIDONE IODINE Ointment 10% w/v IP
705 M-706
POVIDONE IODINE Ointment 5% W/w IP
706 M-707
POVIDONE IODINE Solution 5% w/v IP
707 M-708
SALICYLIC ACID WITH BETAMETHASONE Ointment 3% W/w+0.64% W/w
708 M-709
SILVER SULPHADIAZINE Cream 1% W/w IP
709 M-710
SILVER SULPHADIAZINE Cream 1% W/w IP
710 M-711
SILVER SULPHADIAZINE+CHLORHEXIDINE GLUCONATE+RECOMBINANT HUMAN
EPIDERMAL GROWTH FACTOR Cream
1% W/w 0.2%
10mcg/gm IP
711 M-712
TRIOXSALEN TABLET 25mg IP
712 M-713
CARBIMAZOLE Tablet 20 mg IP
713 M-714
CARBIMAZOLE Tablet 5 mg IP
714 M-715
CARBIMAZOLE Tablet 10 mg
715 M-
716 IODINE LIQUID 8 mg/ 5 ml
716 M-717
THYROXINE SODIUM Tablet 0.05 mg IP
717 M-718
THYROXINE SODIUM Tablet 0.1 mg IP
718 M-719
DISODIUM HYDROGEN CITRATE LIQUID 1.53 gm/5 ml IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
91 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
719 M-720
DUTASTERIDE Tablet 0.5 mg IP
720 M-721
TAMSULOSIN HCL Tablet 0.2 mg IP
721 M-722
TAMSULOSIN HCL Tablet 0.4 mg. IP
722 M-723
AMINO ACID CAPSULE
(L-Leucine 18.3mg, L-Isoleucine 5.9mg, L-Lysine Hcl25mg, L-
Phenylalanine 5mg, L-threomine 8.3mg, L-valine 6.7mg, L-
Tryptophan 10.1mg, L-Methionine 18.4mg, Copper Suphate
Pentahydrate 1mg, Managanese Sulphate monohydrate 4.6mg, Light Magnesium Oside 30mg,
Selenium75mcg)
FDC
723 M-724
L ORNITHINE L ASPARTATE Tablet 150mg
724 M-725
PEPSIN FUNGAL DIASTASE THIAMINE HCL RIBOFLAVIN PYRIDOXINE HCL
CYANOCOBALAMINE PANTOTHENOL D NICOTINAMIDE
CAPSULE 125mg 18.75mg 2mg 1mg 1.5mcg
1mcg 1.5mg 15mg IP
725 M-726
VITAMIN A SOFTGEL 25000IU IP
726 M-727
ASCORBIC ACID Tablet 100 mg IP
727 M-728
ASCORBIC ACID Tablet 500 mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
92 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
728 M-729
B COMPLEX Capsule
VITAMIN B1 5 MG THIAMINE HYDROCHLORIDE VITAMIN B2 5MG RIBOFLAVIN VITAMIN B6
2MG PYRIDOXINE HYDROCHLORIDE VITAMIN B3
NICOTINAMIDE 50 MG VITAMIN B5 CALCIUM PANTOTHENATE 5
MG
IP
729 M-730
Multi Vitamin (Therapeutic) SYRUP
Containing :Thiamine Hydrochloride 2.5 mg/5 ml, Riboflavine 2.5 mg/ 5 ml,
Pyridoxine Hydrochloride1.0 mg/5 ml, Cyanocobalamine5.0 mcg/5 ml
,Niacinamide25.0 mg/5 ml with dosage instructions-one teaspoonful twice daily
NHM
730 M-731
LACTOBASCILLUS SPOROGENES Capsule 60 millions spores IP
731 M-732
VITAMIN A AND VITAMIN D3 SOFT GELATIN CAP Capsule 5000 iu+400 iu IP
732 M-733
VITAMIN A PALMIPATE Arachis oil base LIQUID 100000 IU/ml IP
733 M-734
VITAMIN A SOFT GELATIN CAP Capsule 50000 iu IP
734 M-735
PROCHLORPERAZINE MALEATE Tablet 10 mg IP
735 M-736
VITAMIN E (TOCOPHEROL ) SOFT GELATIN CAP Capsule 600 mg IP
736 M-737
VITAMIN E (TOCOPHEROL ) SOFT GELATIN CAP Capsule 400 mg IP
737 M-738
VITAMIN D Capsule 60000IU IP
738 M-739
VITAMIN E (TOCOPHEROL ) SOFT GELATIN CAP Capsule 200 mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
93 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
739 M-740
CARBON DIOXIDE GAS NA IP
740 M-741
HALOTHANE LIQUID 0.1%W/W THYMOL IP
741 M-742
HALOTHANE LIQUID 0.1%W/W THYMOL IP
742 M-743
HALOTHANE LIQUID 0.1%W/W THYMOL IP
743 M-744
ISOFLURANE LIQUID 5 mg/5 ml IP
744 M-745
LIGNOCAINE GEL Gel 2%W/V IP
745 M-746
NITROUS OXIDE IP GAS NA IP
746 M-747
OXYGEN IP GAS 0.93 IP
747 M-
748 INDOMETHACIN SR Capsule 75mg IP
748 M-749
INDOMETHACIN Capsule 25mg IP
749 M-750
Turpentine Oil I.P. LIQUID IP
750 M-751
ACETYLSALICYLIC ACID TABLET 300mg ENTERIC COATED
Effervescent IP
751 M-752
ACETYLSALICYLIC ACID TABLET 500mg ENTERIC COATED
Effervescent IP
752 M-753
MEFENAMIC ACID CAPSULE 250mg IP
753 M-754
MEFENAMIC ACID CAPSULE 500mg IP
754 M-755
TRAMADOL CAPSULE 100mg IP
755 M-756
ACETYLSALICYLIC ACID TABLET 100mg ENTERIC COATED IP
756 M-757
OMEPRAZOLE CAPSULE 10mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
94 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
757 M-758
RANITIDINE SYRUP 75mg/ml IP
758 M-759
FLAVOXATE HYDROCHLORIDE TABLET 100mg IP
759 M-760
AMOXYCILLIN SYRUP 250mg/5ml IP
760 M-761
AMOXYCILLIN WITH CLAVLANIC ACID SUSPENSION 200mg+28.5mg/5ml IP
761 M-762
AMOXYCILLIN WITH CLAVLANIC ACID DRY SYRUP 125mg+31.5mg/5ml IP
762 M-763
CEFADROXYL TABLET 1G IP
763 M-764
CEFIXIME SYRUP 100mg/5ml IP
764 M-765
CLOXACILLIN CAPSULE 500mg IP
765 M-
766 CLOXACILLIN SYRUP 125mg/5ml IP
766 M-767
AZITHROMYCIN SYRUP 200mg/5ml IP
767 M-768
CIPROFLOXACIN SUSPENSION 250mg/5ml IP
768 M-769
SPIRAMYCIN TABLET 3 Million I U IP
769 M-770
SPIRAMYCIN TABLET 1.5 Million I U IP
770 M-771
FLUCONAZOLE TABLET 100mg IP
771 M-772
FLUCONAZOLE TABLET 200mg IP
772 M-773
FLUCONAZOLE TABLET 400mg IP
773 M-774
FLUCONAZOLE SYRUP 50mg/5ml IP
774 M-775
ACYCLOVIR SYRUP 400mg/5ml IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
95 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
775 M-776
RIBAVIRIN CAPSULE 200mg IP
776 M-777
TENOFOVIR TABLET 300mg IP
777 M-778
WARFERIN TABLET 1mg IP
778 M-779
WARFERIN TABLET 2mg IP
779 M-780
WARFERIN TABLET 3mg IP
780 M-781
MORPHINE TABLET 10mg IP
781 M-782
CARBAMAZEPINE SYRUP 200mg/ml IP
782 M-783
DIAZEPAM SYRUP 2mg/5ML IP
783 M-
784 DIAZEPAM SUPPOSITORY 5mg IP
784 M-785
LORAZEPAM TABLET 1mg IP
785 M-786
LORAZEPAM TABLET 2mg IP
786 M-787
PHENYTOIN TABLET 50mg IP
787 M-788
PHENYTOIN TABLET 300mg IP
788 M-789
PHENYTOIN TABLET 300mg ER IP
789 M-790
PHENYTOIN SYRUP 30mg/5ml IP
790 M-791
SODIUM VALPROATE TABLET 300mg IP
791 M-792
SODIUM VALPROATE TABLET 500mg IP
792 M-793
METFORMIN HYDROCHLORIDE TABLET 750mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
96 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
793 M-794
CLOMIPHENE CITRATE TABLET 100mg IP
794 M-795
CHLORPHENIRAMINE MALEATE SYRUP 2mg/5ML IP
795 M-796
EBASTINE TABLET 10mg IP
796 M-797
EBASTINE TABLET 20mg IP
797 M-798
ALBENDAZOLE TABLET 400mg IP
798 M-799
MEBENDAZOLE SYRUP 100mg/5ml IP
799 M-800
DIETHYLCARBAMAZINE CITRATE SYRUP 120mg/5ml IP
800 M-801
DIETHYLDIPHENYLSULPHONE TABLET 25mg IP
801 M-
802 DIETHYLDIPHENYLSULPHONE TABLET 100mg IP
802 M-803
PRAZIQUANTEL TABLET 600mg IP
803 M-804
ARTEMETHER WITH LUMEFATRINE SYRUP 80mg+480mg/5ml IP
804 M-805
CHLOROQUINE TABLET 150mg IP
805 M-806
QUININE TABLET 300mg IP
806 M-807
RIFAMPICIN CAPSULE 300mg IP
807 M-808
CLOPIDOGREL TABLET 75mg IP
808 M-809
ISOSORBIDE MONONITRATE TABLET 30mg SR IP
809 M-810
ISOSORBIDE MONONITRATE TABLET 60mgSR IP
810 M-811
METOPROLOL TABLET 25mg SR IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
97 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
811 M-812
METOPROLOL TABLET 50mg SR IP
812 M-813
AMLODEPINE BESYLATE TABLET 2.5mg IP
813 M-814
ATENOLOL TABLET 100mg IP
814 M-815
METHYLDOPA TABLET 500mg IP
815 M-816
RAMIPRIL TABLET 5mg IP
816 M-817
TELMISARTAN TABLET 20mg IP
817 M-818
TADALAFIL TABLET 2.5mg IP
818 M-819
TADALAFIL TABLET 5mg IP
819 M-
820 SILDENAFIL TABLET 5mg IP
820 M-821
SILDENAFIL TABLET 20mg IP
821 M-822
BUDESONIDE RASPULE 0.5mg/ml IP
822 M-823
BUDESONIDE WITH FORMOTEROL INHALER 100mcg+6mcg/DOSE IP
823 M-824
BUDESONIDE WITH FORMOTEROL INHALER 200mcg+6mcg/DOSE IP
824 M-825
BUDESONIDE WITH FORMOTEROL INHALER 400mcg+6mcg/DOSE IP
825 M-826
SALBUTAMOL SYRUP 2mg/5ML IP
826 M-827
TIOTROPIUM INHALER 9mcg/DOSE IP
827 M-828
TIOTROPIUM INHALER 18mcg/DOSE IP
828 M-829
METHOTREXATE TABLET 5mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
98 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
829 M-830
METHOTREXATE TABLET 7.5mg IP
830 M-831
METHOTREXATE TABLET 10mg IP
831 M-832
AZATHIOPRINE TABLET 50mg IP
832 M-833
DEXAMETHASONE TABLET 0.5mg IP
833 M-834
PREDNISOLONE SYRUP 5mg/ml IP
834 M-835
PREDNISOLONE SYRUP 15mg/ml IP
835 M-836
HYDROCORTISONE TABLET 5mg IP
836 M-837
HYDROCORTISONE TABLET 10mg IP
837 M-
838 METHYLPREDNISOLONE TABLET 8mg IP
838 M-839
METHYLPREDNISOLONE TABLET 16mg IP
839 M-840
METHYLPREDNISOLONE TABLET 32mg IP
840 M-841
HYDROCHLOROTHIAZIDE TABLET 25mg IP
841 M-842
FRUSEMIDE SYRUP 10mg/ml IP
842 M-843
HYDROCHLOROTHIAZIDE TABLET 50mg IP
843 M-844
ALLOPURINOL TABLET 300mg IP
844 M-845
COLCHICINE TABLET 0.5mg IP
845 M-846
HYDROXYCHLOROQUINE TABLET 400mg IP
846 M-847
TIZANIDINE HYDROCHLORIDE TABLET 4mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
99 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
847 M-848
Lornoxicam Tab 16mg SR
848 M-849
NEOSTIGMINE TABLET 15mg IP
849 M-850
NICOTINE GUM 2mg IP
850 M-851
NICOTINE GUM 4mg IP
851 M-852
NICOTINE PATCH 114mg IP
852 M-853
NITROFURANTOIN SUSPENSION 25mg/5ml IP
853 M-854
SECNIDAZOLE Tab 2gm I.P.
854 M-855
ETHINYLESTRADIOL WITH NORETHISTRONE TABLET 0.035mg+1mg IP
855 M-856
DINOPROSTONE GEL 0.5mg IP
856 M-857
MISOPROSTOL Tab 400mcg I.P.
857 M-858
Sertaconazole Nitrate Vaginal Tab with
Applicator 500mg
858 M-859
XYLOMETAZOLINE NASAL DROPS 0.001 IP
859 M-860
FLUORESCEIN SODIUM EYE DROPS 0.01 IP
860 M-861
CIPROFLOXACIN OINTMENT 0.003 IP
861 M-862
POVIDONE IODINE EYE DROPS 0.006 IP
862 M-863
PREDNISOLONE EYE DROPS 0.001 IP
863 M-864
PROPARACAINE HYDROCHLORIDE EYE DROPS 0.005 IP
864 M-865
PILOCARPINE EYE DROPS 0.04 IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
100 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
865 M-866
HOMATROPINE EYE DROPS 0.02 IP
866 M-867
PHENYLEPHRINE EYE DROPS 0.05 IP
867 M-868
FERROUS FUMERATE TABLET 200mg EQUIVALENT TO 65mg
FERROUS ION IP
868 M-869
FERROUS GLUCONATE TABLET 300mg EQUIVALENT TO 35 mg
FERROUS ION IP
869 M-870
FERROUS SULPHATE TABLET 200mg EQUIVALENT TO 60mg
FERROUS ION IP
870 M-871
POTASSIUM CHLORIDE SYRUP 500mg/5ml IP
871 M-872
CALCIUM CARBONATE TABLET 250mg IP
872 M-873
CALCIUM CARBONATE TABLET 500mg IP
873 M-874
POTASSIUM CHLORIDE TABLET 20 milliequivalents SR IP
874 M-875
BISACODYL SUPPOSITORY 5mg IP
875 M-876
PROPANOLOL HYDROCHLORIDE TABLET 80mg IP
876 M-877
RISPERIDONE SYRUP 1mg/ml IP
877 M-878
FLUOXETINE CAPSULE 10mg IP
878 M-879
FLUOXETINE CAPSULE 60mg IP
879 M-880
CLOMIPRAMINE CAPSULE 10mg IP
880 M-881
CLOMIPRAMINE CAPSULE 75mg IP
881 M-882
ERYTHROMYCIN OINTMENT 0.005 IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
101 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
882 M-883
CALAMINE LOTION
CALAMINE 150G ZINC OXIDE 50G BENTONITE 30G SODIUM CITRATE
5G LIQUIFIED PHENOL 5ML GLYCERINE 50ML AQUA 1L
IP
883 M-884
BENZOYL PEROXIDE GEL 0.025 IP
884 M-885
PERMETHRIN LOTION 0.01 IP
885 M-886
Gama Benzene Hexachloride +Benzoczine CREAM 1%+2% I.P.
886 M-887
LEVOTHYROXINE TABLET 12.5mcg IP
887 M-888
LEVOTHYROXINE TABLET 25mcg IP
888 M-889
LEVOTHYROXINE TABLET 50mcg IP
889 M-
890 LEVOTHYROXINE TABLET 75mcg IP
890 M-891
LEVOTHYROXINE TABLET 100mcg IP
891 M-892
LEVOTHYROXINE TABLET 150mcg IP
892 M-893
PHYTOMENADIONE TABLET 10mg IP
893 M-894
CHOLECALCIFEROL SYRUP 400 IU/ml IP
894 M-895
CHOLECALCIFEROL TABLET 1000 IU IP
895 M-896
PYRIDOXINE TABLET 10mg IP
896 M-897
PYRIDOXINE TABLET 50mg IP
897 M-898
MIDAZOLAM TABLET 7.5mg IP
898 M-899
MIDAZOLAM TABLET 15mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
102 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
899 M-900
MIDAZOLAM SYRUP 2mg/ML IP
900 M-901
SEVOFLURANE LIQUID IP
901 M-902
PRILOCAINE WITH LIGNOCAINE CREAM 2.5%+2.5% IP
902 M-903
CETRIMIDE SOLUTION 0.2 IP
903 M-904
CETRIMIDE SOLUTION 0.2 IP
904 M-905
POTASSIUM PERMANGANATE POWDER CRYSTALS FOR SOLUTION IP
905 M-906
Dextrose Monohydrate POWDER 1 IP
906 M-907
ETHYL ALCOHAL LIQUID 0.7 IP
907 M-
908 ETHYL ALCOHAL LIQUID 0.7 IP
908 M-909
Formalin LIQUID IP
909 M-910
Paraffin I.PWhite Soft. GEL IP
910 M-911
Glycerin I.P. LIQUID IP
911 M-912
Glycerin I.P. LIQUID IP
912 M-913
Glycerin I.P. LIQUID IP
913 M-914
Glycerin I.P. LIQUID IP
914 M-915
Hydrogen Peroxide Solution I.P. LIQUID 6% w/v IP
915 M-916
Hydrogen Peroxide Solution I.P. LIQUID 9% w/v IP
916 M-917
Hydrogen Peroxide Solution I.P. LIQUID 6% w/v IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
103 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
917 M-918
Hydrogen Peroxide Solution I.P. LIQUID 9% w/v IP
918 M-919
Hydrogen Peroxide Solution I.P. LIQUID 6% w/v IP
919 M-920
Hydrogen Peroxide Solution I.P. LIQUID 9% w/v IP
920 M-921
Chlorine Water LIQUID 10% w/v
921 M-922
Boric Acid I.P. POWDER IP
922 M-923
Boric Acid I.P. POWDER IP
923 M-924
Boric Acid I.P. POWDER IP
924 M-925
Acriflavin powder POWDER IP
925 M-
926
CALCIUM SULPHATE HEMIHYDRATE(Plaster of
Paris) I.P. POWDER IP
926 M-927
CALCIUM SULPHATE HEMIHYDRATE(Plaster of Paris) I.P.
POWDER 2
927 M-928
Magnesium Sulphate I.P. POWDER IP
928 M-929
Magnesium Sulphate I.P. POWDER IP
929 M-930
Lysol I.P. LIQUID IP
930 M-931
Lysol I.P. LIQUID IP
931 M-932
Lysol I.P. LIQUID IP
932 M-933
Tab. Sodium Dichloroisocyanurate TABLET 33mg available Chlorine 20 mg
suitable for 5 litres IP
933 M-934
Tab. Sodium Dichloroisocyanurate TABLET 8.68 gms available chlorine 5000
mg suitable for 1000 litres of water IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
104 | P a g e
S No.
Code
Name Formulation Strength /Size Pharmacopeia
Name
Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
934 M-935
Tab. Sodium Dichloroisocyanurate TABLET 67 mg available chlorine 40 mg suitable for 10 litres of water
IP
935 M-936
Tab. Sodium Dichloroisocyanurate TABLET 1.67 gms available chlorine 1000
mg suitable for 200 litres IP
936 M-937
Tab. Sodium Dichloroisocyanurate TABLET 167mg available Chlorine 100 mg
suitable for 20 litres IP
937 M-938
1 Tab Azithromycin (1 gm) /2 Tab Azithromycin (500mg) & 1 Tab Cefixme (400mg)
Kit-1 1 gm 500mg
400mg IP
938 M-939
1 Tablet Secnidazole (2 gm) / 2 Tablet Secnidazole (1 gm) &
Tab Fluconazole (150 mg) Kit-2
2 gm 1 gm 150mg
IP
939 M-940
Injection Benzathine Pencillin (2.4 MU) + & 1 Tablet Azithromycin (1gm) + distilled water (10
ml) Kit-3 2.4 MU 1gm 10ml IP
940 M-941
28 Tablet /Capsules of Doxycycline (100mg) &
1 Tablet Azithromycin (1 gm)/ 2 Tablet Azithromycin (500mg)
Kit-4 100mg 1gm
500mg IP
941 M-942
21 Tablet of Acyclovir (400mg) Kit-5 400mg IP
942 M-943
1 Tab Cefixme (400mg) & 28 Tablet of Metronidazole (400mg) & 28 Tablet
of Doxycycline (100mg) Kit-6
400mg 400mg 100mg
IP
943 M-944
42 Tablet of Doxycycline (100mg) & 1 Tablet Azithromycin (1 gm)
Kit-7 100mg 1gm IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
105 | P a g e
5. PRICE SCHEDULE: FOR LIST OF INJECTABLES
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
1 I-1 ACECLOFINAC Injection 150mg/ml
2 I-2 DICLOFENAC SODIUM Injection 25 mg/ml IP
3 I-3 KETOROLAC TROMETHAMINE Injection 30 mg/ml USP
4 I-4 PARACETAMOL Injection 150mg/ml IP
5 I-5 PARACETAMOL
MANNITOL/CYSTIENE Injection 10mg/ml BP
6 I-6 PARACETAMOL
MANNITOL/CYSTIENE Injection 10mg/ml BP
7 I-7 PENTAZOCINE LACTATE Injection 30 mg/ml IP
8 I-8 PHLOROGLUCINOL+
TRIMETHYLPHLOROGLUCINOL Injection 40mg/0.4mg BP
9 I-9 TRAMADOL HYDROCHLORIDE Injection 50mg/ ml IP
10 I-10 NANDROLONE DECANOATE Injection 50 mg./ml. IP
11 I-11 NANDROLONE PHENYL
PROPIONATE Injection 25 mg/ml IP
12 I-12 NANDROLONE PHENYL
PROPIONATE Injection 50 mg./ml. IP
13 I-13 OMEPRAZOLE Injection 40mg USP
14 I-14 PANTOPRAZOLE Injection 4 mg/ml IP
15 I-15 RANITIDINE HYDROCHLORIDE Injection 25mg/ ml IP
16 I-16 DICYCLOMINE HYDROCHLORIDE Injection 10 mg/ml USP
17 I-17 DROTAVERINE HYDROCHLORIDE Injection 20mg/ml IP
18 I-18 HYOSCINE BUTYLE BROMIDE Injection 20mg/ml IP
19 I-19 AMIKACIN SULPHATE Injection 100 mg/2ml IP
20 I-20 AMIKACIN SULPHATE Injection 250 mg/2ml IP
21 I-21 AMIKACIN SULPHATE Injection 500 mg/2ml IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
106 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
22 I-22 AMOXYCILLIN SODIUM Injection 250 mg IP
23 I-23 AMOXYCILLIN SODIUM Injection 500 mg IP
24 I-24 AMOXYCILLINE TRIHYDRATE WITH
CLAVULANATE POTASSIUM Injection 1 gm+200mg IP
25 I-25 AMOXYCILLINE TRIHYDRATE WITH
CLAVULANATE POTASSIUM Injection 500MG+100mg IP
26 I-26 AMPICILLIN SODIUM Injection 100 mg IP
27 I-27 AMPICILLIN SODIUM Injection 500 mg IP
28 I-28 AMPICILLIN SODIUM Injection 1000 mg IP
29 I-29 ANIDULAFUNGIN Injection 100mg USP
30 I-30 BENZATHINE PENICILLIN SODIUM Injection 12 lacs IU IP
31 I-31 BENZATHINE PENICILLIN SODIUM Injection 24 lacs IU IP
32 I-32 BENZATHINE PENICILLIN SODIUM Injection 6 lacs IU IP
33 I-33 CEFOPERAZONE WITH SULBACTUM Injection 500 mg+500 mg IP
34 I-34 CEFOPERAZONE SODIUM Injection 250 mg IP
35 I-35 CEFOPERAZONE SODIUM Injection 500 mg IP
36 I-36 CEFOPERAZONE SODIUM Injection 1 gm IP
37 I-37 CEFOTAXIME SODIUM Injection 1 gm IP
38 I-38 CEFOTAXIME SODIUM Injection 125 mg IP
39 I-39 CEFOTAXIME SODIUM Injection 250 mg IP
40 I-40 CEFOTAXIME SODIUM Injection 500 mg IP
41 I-41 CEFPIROME SULPHATE Injection 1 gm IP
42 I-42 CEFTAZIDIME PENTAHYDRATE Injection 250 mg IP
43 I-43 CEFTAZIDIME PENTAHYDRATE Injection 500 mg IP
44 I-44 CEFTAZIDIME PENTAHYDRATE Injection 1 gm IP
45 I-45 CEFTAZIDIME PENTAHYDRATE Injection 2gm IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
107 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
46 I-46 CEFTRIAXONE SODIUM Injection 1 gm IP
47 I-47 CEFTRIAXONE SODIUM Injection 500 mg IP
48 I-48 CEFTRIAXONE SODIUM Injection 250mg IP
49 I-49 CEFTRIAXONE SODIUM Injection 125 mg IP
50 I-50 CIPROFLOXACIN HYDROCHLORIDE Injection 2 mg/ml BP
51 I-51 CLINDAMYCIN PHOSPHATE Injection 150mg/ml IP
52 I-52 GENTAMICIN SULPHATE Injection 10 mg/ml IP
53 I-53 GENTAMICIN SULPHATE Injection 40 mg/ml IP
54 I-54 IMIPENEM WITH CILASTATIN Injection 250 mg+250 mg IP
55 I-55 IMIPENEM WITH CILASTATIN Injection 500 mg+500 mg IP
56 I-56 LEVOFLOXACIN IN 5% DEXTROSE Injection 500 mg/100 ml USP
57 I-57 LINCOMYCIN HYDROCHLORIDE Injection 300 mg USP
58 I-58 LINEZOLID Injection 2mg/ml USP
59 I-59 METRONIDAZOLE Injection 5 mg/ml IP
60 I-60 PIPERACILLIN WITH TAZOBACTAM
SODIUM Injection 4gm + 500mg USP
61 I-61 TIGECYCLINE Injection 50 mg USP
62 I-62 VANCOMYCIN HCL Injection 500 mg IP
63 I-63 ALTEPLASE Injection 100 mg(58millioni IU) USP
64 I-64 ALTEPLASE Injection 50 mg(29millioni IU) USP
65 I-65 ALTEPLASE Injection 20 mg USP
66 I-66 HEPARIN SODIUM Injection 10000 IU USP
67 I-67 DALTEPARIN LOW MOL WT
HEPARIN Injection 2500IU USP
68 I-68 ENOXAPARIN LOW MOL WT
HEPARIN Injection 60mg//0.6ml USP
69 I-69 STREPTOKINASE Injection 1500000 IU IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
108 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
70 I-70 FOSPHENYTOIN SODIUM Injection 75mg/ml
71 I-71 FOSPHENYTOIN SODIUM Injection 75mg/ml
72 I-72 LEVETIRACETAM Injection 100 mg/ml USP
73 I-73 PHENOBARBITONE SODIUM Injection 100 mg/ml BP
74 I-74 PHENYTOIN SODIUM Injection 50 mg./ml. BP
75 I-75 INSULIN HUMAN ULTRA LENTE Injection 40 IU/ml IP
76 I-76 INSULIN NEUTRAL WITH INSULIN
ISOPHANE Injection 25%/75% 100IU/ml BP
77 I-77 INSULIN HUMAN SOLUBLE Injection 40 IU/ml BP
78 I-78 INSULIN HUMAN SOLUBLE with
INSULIN HUMAN NEUTRAL PROTAMINE HAGEDORN
Injection 30%70%40 IU/ml BP
79 I-79 INSULIN GLARGINE Injection 100IU/ml BP
80 I-80 INSULIN GLULISINE Injection 100 IU/ml USP
81 I-81 INSULIN LISPRO Injection 100IU/ml BP
82 I-82 INSULIN LISPRO WITH INSULIN
PROTAMINE Injection 25%/75% 100IU/ml BP
83 I-83 INSULIN LISPRO WITH INSULIN
PROTAMINE Injection 50%, /50%100IU/ml BP
84 I-84 INSULIN SOLUBLE WITH INSULIN
ISOPHANE Injection 50%, /50%100IU/ml IP
85 I-85 INSULIN SOLUBLE WITH INSULIN
ISOPHANE Injection 50%, /50%40IU/ml IP
86 I-86 PHENIRAMINE MALEATE Injection 22.75 mg/ml IP
87 I-87 ARTEETHER Injection 75 mg/ml IP
88 I-88 ARTESUNATE Injection 60 mg IP
89 I-89 CHLOROQUINE PHOSPHATE Injection 40mg/ml IP
90 I-90 CHLOROQUINE PHOSPHATE Injection 40 mg/ml IP
91 I-91 QUININE DIHYDROCHLORIDE Injection 300 mg/ml IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
109 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
92 I-92 STREPTOMYCIN SULPHATE Injection 0.75G eq. streptomycin IP
93 I-93 STREPTOMYCIN SULPHATE Injection 1G eq. streptomycin IP
94 I-94 METOCLOPRAMIDE HYDROCHLORIDE
Injection 5 mg/ml USP
95 I-95 METOCLOPRAMIDE
HYDROCHLORIDE Injection 5 mg/ml USP
96 I-96 ONDANSETRON Injection 2 mg/ml IP
97 I-97 ONDANSETRON Injection 2 mg/ml IP
98 I-98 PROCHLORPERAZINE Injection 12.5mg/ml BP
99 I-99 PROMETHAZINE HYDROCHLORIDE Injection 25 mg/ml USP
100 I-100 AMIODARONE HYDROCHLORIDE Injection 50 mg./ml. IP
101 I-101 DILTIAZEM HYDROCHLORIDE Injection 5 mg/ml USP
102 I-102 DOBUTAMINE HYDROCHLORIDE Injection 12.5 mg./ml. USP
103 I-103 DOBUTAMINE HYDROCHLORIDE Injection 50 mg./ml. USP
104 I-104 DOPAMINE HYDROCHLORIDE Injection 40 mg/ml USP
105 I-105 LIGNOCAINE HCL Injection 1%W/v BP
106 I-106 LIGNOCAINE HCL Injection 2%w/v BP
107 I-107 LIGNOCAINE IN DEXTROSE Injection 5%W/V in 7.5%Dextrose BP
108 I-108 LIGNOCAINE HCL WITH
ADRENALINE Injection
LIGNOCAINE HCL 20mg/ml ADRENALINE BITARTATE Eq. TO
Adrenaline 5mcg/ml BP
109 I-109 LIGNOCAINE HCL WITH SODIUM
CHLORIDE Injection 21.3mg+6mg/ml BP
110 I-110 MEPHENTERMINE SULPHATE Injection 30 mg/ml IP
111 I-111 MEPHENTERMINE SULPHATE Injection 15 mg/ml IP
112 I-112 TENECTEPLASE Injection 30 mg(6000IU) BP
113 I-113 TENECTEPLASE Injection 40 mg(8000iu) BP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
110 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
114 I-114 TENECTEPLASE Injection 50 mg(10000IU) BP
115 I-115 VERAPAMIL HYDROCHLORIDE Injection 2.5 mg/ml IP
116 I-116 GLYCERYL TRINITRATE Injection 5 mg/ml IP
117 I-117 ADRENALINE BI TARTRATE Injection 1 mg/ml IP
118 I-118 AMINOPHYLLINE DIHYDRATE Injection 25 mg/ml IP
119 I-119 BOVINE LUNG SURFACTANT SUSPENSION 25mg/ml USP
120 I-120 DOXAPRAM HYDROCHLORIDE Injection 20 mg/ml USP
121 I-121 THEOPHYLLINE WITH
ETOPHYLLINE Injection 25.3mg+84.7 mg/ml IP
122 I-122 TRANEXAMIC ACID Injection 100mg/ml IP
123 I-123 ANTI HAEMOPHYLIC FACTOR IX Injection 500 IU USP
124 I-124 ANTI HAEMOPHYLIC FACTOR VIII Injection 500 IU USP
125 I-125 DESFERRIOXAMINE MESILATE Injection 500mg IP
126 I-126 ETHAMSYLATE Injection 125 mg/ml BP
127 I-127 HAEMOCOAGULASE Injection 1 christensen unit/ml IP
128 I-128 PROTAMINE SULPHATE Injection 10 mg/ ml BP
129 I-129 BLEOMYCIN SULPHATE Injection 15Unit Of Bleomycin
130 I-130 BLEOMYCIN SULPHATE Injection 30Unit Of Bleomycin
131 I-131 BORTEZOMIB Injection 3.5mg USP
132 I-132 BORTEZOMIB Injection 2mg USP
133 I-133 CARBOPLATIN Injection 10mg/ml BP
134 I-134 CARBOPLATIN Injection 10mg/ml BP
135 I-135 CISPLATIN Injection 1 mg/ml BP
136 I-136 CISPLATIN Injection 1 mg/ml IP
137 I-137 CYCLOPHOSPHAMIDE Injection 1G USP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
111 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
138 I-138 CYCLOPHOSPHAMIDE Injection 2G USP
139 I-139 CYCLOPHOSPHAMIDE Injection 200 mg USP
140 I-140 CYCLOPHOSPHAMIDE Injection 500 mg USP
141 I-141 POTASSIUM CHLORIDE Injection 150mg/ml IP
142 I-142 DOCETAXEL TRIHYDRATE Injection 40mg/ml IP
143 I-143 DOCETAXEL TRIHYDRATE Injection 20mg/ml IP
144 I-144 DOXORUBICIN HCL LIPOSOMAL Injection 2 mg/ml USP
145 I-145 DOXORUBICIN HCL LIPOSOMAL Injection 2 mg/ml USP
146 I-146 DOXORUBICIN HCL LIPOSOMAL Injection 2 mg/ml USP
147 I-147 GOSERLIN ACETATE Injection 3.6mg
148 I-148 ETOPOSIDE PHOSPHATE Injection 100 mg BP
149 I-149 FLUOROURACIL Injection 50 mg/ml USP
150 I-150 FLUOROURACIL Injection 50 mg/ml USP
151 I-151 GOSERLIN ACETATE Injection 10.8mg
152 I-152 METHOTREXATE Injection 25mg/ml USP
153 I-153 OXALIPLATIN Injection 5 mg / ml USP
154 I-154 PACLITAXEL Injection 100 mg IP
155 I-155 PACLITAXEL Injection 260 mg IP
156 I-156 VINCRISTINE SULPHATE Injection 1 mg/ml IP
157 I-157 BETAMETHASONE SODIUM
PHOSPHATE Injection 4 mg/ml BP
158 I-158 DEXAMETHASONE SODIUM
PHOSPHATE Injection 4 mg/ml IP
159 I-159 HYDROCORTISONE SODIUM
SUCCIINATE Injection 100 mg IP
160 I-160 HYLAN GF20 Injection 8mg/ml USP
161 I-161 METHYLPREDNISOLONE ACETATE Injection 80mg\ml USP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
112 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
162 I-162 METHYLPREDNISOLONE ACETATE Injection 20mg/ml USP
163 I-163 METHYLPREDNISOLONE ACETATE Injection 40mg\ml USP
164 I-164 METHYLPREDNISOLONE
SUCCINATE SODIUM Injection 1gm/ml USP
165 I-165 METHYLPREDNISOLONE
SUCCINATE SODIUM Injection 125mg/ml USP
166 I-166 METHYLPREDNISOLONE
SUCCINATE SODIUM Injection 500mg/ml USP
167 I-167 TRIAMCINOLONE ACETONIDE Injection 40mg/ml IP
168 I-168 FRUSEMIDE Injection 10 mg/ml IP
169 I-169 TORASEMIDE Injection 10 mg/ml IP
170 I-170 ABATACEPT Injection 250mg USP
171 I-171 METHOCARBAMOL Injection 100mg/ml IP
172 I-172 NALOXONE HCL Injection 1mg/ml IP
173 I-173 NALOXONE HCL(NEONATAL) Injection 20MCG/ML USP
174 I-174 NALOXONE HCL Injection 400MCG USP
175 I-175 NEOSTEGMINE METHYL SULPHATE Injection 0.5 mg/ml BP
176 I-176 NEOSTEGMINE METHYL SULPHATE Injection 0.5 mg/ml IP
177 I-177 PRALIDOXIME CHLORIDE Injection 1G USP
178 I-178 DEHYDROEMETINE DIHYDROCHLORIDE
Injection 30 mg/ml IP
179 I-179 TINIDAZOLE Injection 2mg/ml IP
180 I-180 AQUA EXTRACT OF FRESH HUMAN
PLECENTA Injection 0.1 gm/2 ml IP
181 I-181 CAMYLOFIN DIHYDROCHLORIDE Injection 25mg/ml BP
182 I-182 CARBOPROST TROMETHAMINE Injection 250 mcg/ml IP
183 I-183 DEPOT MEDROXY PROGESTERONE
ACETATE Injection 150 mg/ml IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
113 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
184 I-184 DEPOT MEDROXY PROGESTERONE
ACETATE Injection 400 mg/ml IP
185 I-185 HUMAN CHORIONIC
GONADOTROPIN Injection 5000 IU BP
186 I-186 IMMUNOGLOBULIN HUMAN ANTI-D
MONOCLONAL Injection 300mcg IP
187 I-187 IMMUNOGLOBULIN HUMAN ANTI-D
MONOCLONAL Injection 150mcg IP
188 I-188 HYDROXYPROGESTERONE
CAPROATE Injection 250 mg/ml IP
189 I-189 HYDROXYPROGESTERONE
CAPROATE Injection 250 mg/ml IP
190 I-190 ANTI HAEMOPHYLIC FACTOR VIII Injection 250 IU USP
191 I-191 DALTEPARIN LOW MOL WT
HEPARIN Injection 5000IU USP
192 I-192 ISOXUPRIME HYDROCHLORIDE Injection 5mg/ml USP
193 I-193 LABETALOL HCL Injection 5mg/ml USP
194 I-194 LABETALOL HCL Injection 5mg/ml USP
195 I-195 MAGNESIUM SULPHATE Injection 50% w/v USP
196 I-196 MAGNESIUM SULPHATE Injection 50% w/v EQ To mg++mlMol/ml USP
197 I-197 METHYLERGOMETRINE MALEATE Injection 0.2 mg USP
198 I-198 OXYTOCIN Injection 5IU/ML IP
199 I-199 OXYTOCIN Injection 10 IU/ML USP
200 I-200 RITODRINE HYDROCHLORIDE Injection 10 mg/ml USP
201 I-201 VALETHAMATE BROMIDE Injection 8mg/ml IP
202 I-202 HYALURONIDAZE Injection 1500 IU IP
203 I-203 Hydroxypropyl methylcellulose
Ophthalmic(HPMC) Injection 2% in BalancedSaltSolution USP
204 I-204 SODIUM HYALURONATE Injection 10mg/ml IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
114 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
205 I-205 CALCIUM GLUCONATE Injection 100 mg IP
206 I-206 IMMUNOGLOBULIN HUMAN ANTI-D
POLYCLONAL Injection 300mcg IP
207 I-207 IMMUNOGLOBULIN HUMAN ANTI-D
POLYCLONAL Injection 150mcg IP
208 I-208 DARBEPOETIN INJECTION 40mcg/ml USP
209 I-209 ERYTHROPOIETIN Injection 2000 IU/ml USP
210 I-210 ERYTHROPOIETIN Injection 4000 IU USP
211 I-211 ERYTHROPOIETIN Injection 5000 IU/ml USP
212 I-212 ERYTHROPOIETIN Injection 10000 IU/ml USP
213 I-213 FERRIC CARBOXY MALTOSE Injection 50mg/ml BP
214 I-214 IRON DEXTRAN Injection 50 mg/ml USP
215 I-215
IRON SUCROSE CONTAINING FERRIC HYDROXIDE AS COMPLEX
WITH SUCROSE EQ TO ELEMENTAL IRON 20MG/ML
Injection 20 mg/ml USP
216 I-216
IRON SUCROSE CONTAINING FERRIC HYDROXIDE AS COMPLEX
WITH SUCROSE EQ TO ELEMENTAL IRON 20MG/ML
Injection 20 mg/ml USP
217 I-217 METHYLCOBALAMINE Injection 500 mcg/ml USP
218 I-218 PHYTOMENADIONE Vit.K Injection 1mg/ml IP
219 I-219 ERYTHROPOIETIN Injection 3000 units / ml IP
220 I-220 DIAZEPAM Injection 5 mg/ml IP
221 I-221 LORAZEPAM Injection 2 mg/ml USP
222 I-222 HALOPERIDOL LACTATE Injection 5mg/ml USP
223 I-223 PIRACETAM Injection 200 mg/15ml IP
224 I-224 ANTI SERUM POLYVALENT SNAKE
VENOM ASV Injection 10 ml USP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
115 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
225 I-225
ANTI SERUM Polyvalent Equine Purified Concentrated Liquid of Anti
Gas Gangrene Sera(anti gas gangrene serum)
Injection 30000 IU IP
226 I-226 ANTI SERUM RABIES Injection 300 IU/ml IP
227 I-227 VACCINE RUBELLA Injection 0.5ML IP
228 I-228 Vaccine H1N1 Influenza Injection 0.5ml IP
229 I-229 Vaccine Human PapilomaVirus type
16&18(Recombinant,AS04 adjuvanted)
Injection 0.5 ml
230 I-230 HUMAN NORMAL
IMMUNOGLOBULIN Injection 10% w/v IP
231 I-231 HUMAN NORMAL
IMMUNOGLOBULIN Injection 16.5% w/v IP
232 I-232 IMMUNOGLOBULIN ANTI TETANUS Injection 1000 IU IP
233 I-233 IMMUNOGLOBULIN ANTI TETANUS Injection 250 IU IP
234 I-234 IMMUNOGLOBULINDIPHTHERIA
ANTITOXIN Injection 10000 IU BP
235 I-235 Vaccine Inactivated Hepatitis A
(Adsorbed)IP 1ML IP
236 I-236 Vaccine Inactivated Hepatitis A
(Adsorbed)IP For Paediatric/adolescent use
0.5ml IP
237 I-237 Vaccine Measles,Mumps & Rubella
MMR Injection 0.5ml IP
238 I-238 vaccine Pneumococcal
Polysaccharide conjugate (adsorbed)
Injection 0.5 ml IP
239 I-239 IMMUNOGLOBULIN ANTI-
TETANUS Injection 500IU
240 I-240 TUBERCULIN PURIFIED PROTEIN
DERIVATIVE Injection 5TU/0.1ml IP
241 I-241 VACCINE ANTI RABIES Injection 2.5 IU Per Vial IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
116 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
242 I-242 VACCINE ANTI RABIES Injection 2.5 IU Per Vial IP
243 I-243 VACCINE BCG Injection 33million CFU/1ml saline IP
244 I-244 VACCINE DIPHTHERIA PERTUSSIS
TETANUS Injection 0.5ml IP
245 I-245 VACCINE DIPHTHERIA TETANUS Injection 0.5ml IP
246 I-246 VACCINE GENETICALLY
ENGINEERED HEPATITIS B Injection 20mcg/ml IP
247 I-247 VACCINE GENETICALLY
ENGINEERED HEPATITIS B Injection 20mcg/ml IP
248 I-248 VACCINE GENETICALLY
ENGINEERED HEPATITIS B Injection 20mcg/ml IP
249 I-249 Vaccine H1N1 Influenza Injection 0.5ml IP
250 I-250 VACCINE JE Injection 1ml IP
251 I-251 VACCINE LIVE ATTENUATED
MEASLES VACCINE SCHWARTZ Injection 0.5ml IP
252 I-252 VACCINE MEASLES MUMPS RUBELLA VARICELLA MMRV
Injection 0.5ml IP
253 I-253 VACCINE TENTANUS TOXOID Injection 0.5ml IP
254 I-254 VACCINE YELLOW FEVER Injection 0.5ml IP
255 I-255 Varicella vaccine, Live IP 0.5 ml
256 I-256 VACCINE POLIOMYELITIS (LIVE
ATTENUATED) SALK 0.5ml
257 I-257 LEVOTHYROXINE
SODIUM(lyophilized powder) Injection 100 mcg USP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
117 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
258 I-258 AMINO ACID Injection
(L-Lysine Hcl,19.2mg,L-methionine 6.8mg, L-tryptophan
3mg, L-leucine 10mg, L-Isoleucine6.6mg, L-
Phenylalamine 9.5mg, L-valine 6.4mg, L-Arginine Hc,. 10.9mg,
L-Histidine Hcl (Monohyd.)4.7mg, glycine 6mg,
Sorbitol 50mg/ml)
IP
259 I-259 AMINO ACID WITH TAURINE AND
WITHOUT SORBITOL Injection 50 gm/ 500 ml IP
260 I-260 DEXTRAN 70 WITH 5 PERCENT
DEXTROSE Injection 6% w/v IP
261 I-261 DEXTROSE Injection 10% w/v IP
262 I-262 DEXTROSE Injection 5% w/v IP
263 I-263 DEXTROSE WITH SODIUM
CHLORIDE Injection 5% w/v +0.9%W/V IP
264 I-264 HAEMO DIALYSIS FLUID Injection
EACH 1000ml contains:- Potassium chloride IP 5.49gm
Magnesium chloride IP 3.55gm Calcium Chloride IP 7.97gm
Chloride IP 200.66gm Purified Water IP Q.S
IP
265 I-265 SODIUM CHLORIDE Injection 3% w/v USP
266 I-266 SODIUM CHLORIDE Injection 5% w/v USP
267 I-267 MANNITOL Injection 10% w/v IP
268 I-268 MANNITOL Injection 10% w/v IP
269 I-269 MANNITOL Injection 20% w/v IP
270 I-270 MANNITOL Injection 20% w/v IP
271 I-271 MANNITOL WITH GLYCERINE Injection 10gm +10gm/100ml IP
272 I-272 MANNITOL WITH GLYCERINE Injection 10gm +10gm/100ml IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
118 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
273 I-273 MANNITOL WITH GLYCERINE Injection 10gm +10gm/100ml IP
274 I-274 MANNITOL WITH GLYCERINE Injection 20gm + 20gm/100ml IP
275 I-275 MANNITOL WITH GLYCERINE Injection 20gm + 20gm/100ml IP
276 I-276 MANNITOL WITH GLYCERINE Injection 20gm + 20gm/100ml IP
277 I-277 Muliple electrolytes and dextrose
type-1 (Isolyte P) Injection
Sodium acetate trihydrate 0.32gm Potassium chloride
0.13gm Dipotassium hydrogen phosphate heptahydrate
0.026gm magnisium chloride hexahydrate 0.031gm Dextrose 5.0gm Water for injection to
100ml pH 5.0
278 I-278 Multiple electrolytes nad dextrose
type-2(Isolyte R) Injection
Sodium acetate trihydrate 0.64gm Sodium chloride
0.496gm Potassium chloride
0.0746gm calcium chloride dihydrate 0.0368 gm Magnisium chloride hexahydrate 0.0305gm sodium lactate .089gm Dextrose
5.0gm Water for injection to 100ml pH5.5
279 I-279 Multiple electrolytes nad dextrose
type-3(Isolyte M) Injection
Sodium acetate trihydrate 0.28gm Sodium chloride
0.091gm Potassium chloride 0.15gm Dipotassium hydrogen
phosphate heptahydrate 0.13gm Dextrose 5.0gm Water for
injection to 100ml pH5
280 I-280 Multiple electrolytes nad dextrose
type-4(Isolyte G) Injection
Sodium chloride 0.37gm Potassium chloride 0.13gm amonium chloride 0.37gm Dextrose 5.0gm Water for
injection to 100ml
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
119 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
281 I-281 Multiple electrolytes nad dextrose
type-5(Isolyte E) Injection
Sodium acetate trihydrate 0.64gm Sodium chloride
0.50gm Sodium citrate 0.074gm Potassium chloride0.074gm
Calcium chloride 0.035 Magnisium chloride hexahydrate
0.030gm Dextrose 5.0gm Water for
injection to 100ml pH 5
282 I-282 Multiple electrolytes nad dextrose
type-6(Isolyte S) Injection
Sodium acetate trihydrate 0.37gm Sodium chloride 0.53gm Sodium gluconate 0.5gm Potassium chloride 0.037gm Calcium chloride
0.035gm Dipotassium hydrogen phosphate heptahydrate
0.012gm magnisium chloride hexahydrate
0.030gm Water for injection to 100ml pH
7.4
283 I-283 SODIUM CHLORIDE Injection 0.9% w/v IP
284 I-284 SODIUM CHLORIDE Injection 0.9% w/v IP
285 I-285 HYDROXYETHYL STARCH WITH
SODIUM CHLORIDE Injection 6% w/v 0.9% w/v USP
286 I-286 RINGER LACTATE Injection
0.24%w/vLacticAcid (eq.0.32%w/vSod.Lac.) with0.6%w/vSod.Cl.,
0.04%w/vPot .Cl. & 0.027% w/vCal Cl
IP
287 I-287 SODIUM BICARBONATE Injection 7.5% w/v IP
288 I-288 SODIUM BICARBONATE Injection 8.4% w/v IP
289 I-289 HUMAN ALBUMIN Injection 0.2 IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
120 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
290 I-290 WATER FOR INJECTION Injection 5ml IP
291 I-291 WATER FOR INJECTION Injection 10ml IP
292 I-292 Polygeline Polypeptides of degraded gelatin,cross linked via urea bridges
Injection
Polygeline 3.5g(Eq.to0.63g of nitrogen) sodium chloride IP 0.85g Potassium chloride IP
0.038g calcium chloride IP 0.070 g water for inj IP
Q,s/100ml Electrolytes in M.mol/Litre
Na145 m mol per liter K 5.1m Mol per liter
Ca 6.25m Mol per liter Cl 145 m mol per liter
293 I-293 L ORNITHINE L ASPARTATE Injection 0.5 gm/ml USP
294 I-294 ATROPINE SULPHATE Injection 0.6 mg/ml IP
295 I-295 ATRACURIUM BESYLATE Injection 10 mg/ml USP
296 I-296 BUPIVACAINE HYDROCHLORIDE Injection 0.5%W/V IP
297 I-297 VECURONIUM BROMIDE Injection 4 mg BP
298 I-298 CLONIDINE HYDROCHLORIDE Injection 150 mcg IP
299 I-299 DEXMEDETOMIDINE Injection 4 mcg/ml IP
300 I-300 DEXMEDETOMIDINE Injection 4 mcg/ml IP
301 I-301 DEXMEDETOMIDINE Injection 100 mcg/ml IP
302 I-302 FENTANYL CITRATE Injection 50 mcg eq. Fentanyl /ml BP
303 I-303 FENTANYL CITRATE Injection 50 mcg eq. Fentanyl /ml BP
304 I-304 GLYCOPYRROLATE Injection 0.2 mg/ml IP
305 I-305 GLYCOPYRROLATE Injection 0.2 mg/ml IP
306 I-306 KETAMINE HYDROCHLORIDE Injection 50 mg./ml. IP
307 I-307 KETAMINE HYDROCHLORIDE Injection 10 mg/ml IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
121 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
308 I-308 KETAMINE HYDROCHLORIDE Injection 50 mg./ml. IP
309 I-309 LEVOBUPIVACAINE HYDROCHLORIDE
Injection 5 mg/ml USP
310 I-310 LEVOBUPIVACAINE HYDROCHLORIDE
Injection 5 mg/ml USP
311 I-311 IOHEXOL Injection 350 MG/ML IP
312 I-312 MIDAZOLAM HCL Injection 1 mg/ml IP
313 I-313 MIDAZOLAM HCL Injection 1 mg/ml IP
314 I-314 MIDAZOLAM HCL Injection 5 mg/ml USP
315 I-315 MIDAZOLAM HCL Injection 5 mg/ml USP
316 I-316 NEOSTIGMINE METHYL SULPHATE
WITH GLYCOPYRROLATE Injection 0.5 mg/ml +0.1 mg/ml FDC
317 I-317 NEOSTIGMINE METHYL SULPHATE Injection 0.5 mg/ml IP
318 I-318 NORADRENALINE TARTRATE Injection 2 mg/ ml BP
319 I-319 PROPOFOL 1 PERCENT Injection 10 mg/ml IP
320 I-320 PROPOFOL 1 PERCENT Injection 10 mg/ml IP
321 I-321 ROPIVACAINE HYDROCHLORIDE Injection 7.5 mg/ml USP
322 I-322 ROPIVACAINE HYDROCHLORIDE Injection 7.5 mg/ml USP
323 I-323 ROPIVACAINE HYDROCHLORIDE Injection 7.5 mg/ml USP
324 I-324 DEXTRAN 40 WITH 5 PERCENT
DEXTROSE Injection 10% w/v IP
325 I-325 SUCCINYLCHOLINE CHLORIDE Injection 50 mg./ml. IP
326 I-326 SUCCINYLCHOLINE CHLORIDE Injection 50 mg./ml. IP
327 I-327 THIOPENTONE SODIUM Injection 1GM IP
328 I-328 THIOPENTONE SODIUM Injection 500 mg IP
329 I-329 VECURONIUM BROMIDE Injection 10 mg BP
330 I-330 DEXTROSE Injection 25% w/v IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
122 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
331 I-331 BENZYL PENICILLIN INJECTION 10 LAC IU IP
332 I-332 CEFAZOLIN INJECTION 500mg IP
333 I-333 CEFAZOLIN INJECTION 1G IP
334 I-334 CLOXACILLIN INJECTION 250mg IP
335 I-335 AZITHROMYCIN INJECTION 500mg IP
336 I-336 CAPREOMYCIN INJECTION 1G IP
337 I-337 ACYCLOVIR INJECTION 250mg IP
338 I-338 ACYCLOVIR INJECTION 500mg IP
339 I-339 AMPHOTERICIN B INJECTION 50mg IP
340 I-340 CEFOPERAZONE WITH
TAZOBACTUM Inj 1gm+ 125mg
341 I-341 CEFOPERAZONE WITH
TAZOBACTUM Inj 500mg+ 62.5mg
342 I-342 ENOXAPARIN INJECTION 40mg/0.4ml IP
343 I-343 HEPARIN INJECTION 1000 IU/ml IP
344 I-344 MORPHINE INJECTION 10mg/ml IP
345 I-345 MORPHINE INJECTION 15mg/ml IP
346 I-346 PHENYTOIN INJECTION 25mg/ml IP
347 I-347 SODIUM VALPROATE INJECTION 100mg/ml IP
348 I-348 DULAGLUTIDE INJECTION 0.75mg
349 I-349 DULAGLUTIDE INJECTION 1.5mg
350 I-350 ARTESUNATE INJECTION 120mg IP
351 I-351 DIGOXIN INJECTION 0.25mg/ml IP
352 I-352 STREPTOKINASE Injection 750000 IU IP
353 I-353 ADENOSINE INJECTION 3mg/ml IP
354 I-354 HYDROCORTISONE INJECTION 200mg IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
123 | P a g e
S No.
Code Name Formulation Strength /Size Pharmacopeia
Name Testing
Charge (A) Service Tax
(B)
Rate (inclusive All taxes) (A+B)
355 I-355 METHYLTHIONINIUM
CHLORIDE(METHYLENE BLUE) INJECTION 10mg/ml IP
356 I-356 SODIUM NITRITE INJECTION 30mg/ml IP
357 I-357 SODIUM THIOSULPHATE INJECTION 100mg/ml IP
358 I-358 PEGYLATED INTERFERON ALFA 2A INJECTION 180mcg IP
359 I-359 PEGYLATED INTERFERON ALFA 2A INJECTION 80mcg IP
360 I-360 PEGYLATED INTERFERON ALFA 2A INJECTION 100mcg IP
361 I-361 PEGYLATED INTERFERON ALFA 2A INJECTION 120mcg IP
362 I-362 HYDROXYCOBALAMINE INJECTION 1mg/ml IP
363 I-363 Vaccine H1N1 Influenza Inj Multi Dose Vial (10 dose Vial)
364 I-364 Vaccine H1N1 Influenza Inj Multi Dose Vial (10 dose Vial)
365 I-365 Vaccine Anti Rabies Inj 1ml
366 I-366 DEXTROSE INJECTION 0.5 IP
367 I-367 SODIUM CHLORIDE INJECTION 0.0045 IP
368 I-368 PHYTOMENADIONE INJECTION 10mg/ml IP
369 I-369 THIAMINE INJECTION 100mg/ml IP
370 I-370 BUPIVACAINE INJECTION 0.5% WITH 7.5% GLUCOSE IP
371 I-371 LIGNOCAINE HCL WITH
ADRENALINE Injection
LIGNOCAINE HCL 10mg/ml ADRENALINE BITARTATE Eq. TO
Adrenaline 5mcg/ml IP
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
124 | P a g e
6. PRICE SCHEDULE: FOR LIST OF SURGICAL ITEMS
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
1 S-1 Suture Boilable thread 1 Length 25mtrs reel.
2 S-2 Suture Boilable thread 2 Length 25mtrs reel.
3 S-3 Plain Silk Suture 1 Length 25mtrs reel.
4 S-4 Plain Silk Suture 2 Length 25mtrs reel.
5 S-5 Suture Braided Silk 1 Length 25mtrs reel.
6 S-6 Suture Braided Silk 2 Length 25mtrs reel.
10 S-10 Suture Monofilament
Polyamide 6/0
Lenghth 30 CM double armed, Needle size 6 mm Black Needle, Micropoint Spatulated
11 S-11 Suture Monofilament
Polyamide 8/0
Lenghth 30 CM double armed, Needle size
6 mm Black Needle, Micropoint Spatulated
12 S-12 Suture Monofilament
Polyamide 8/0
LENGTH 38 CM NEDLE SIZE 6 MM Black Double Armed Spatulated Needle Curved,
13 S-13 Suture Monofilament
Polyamide 9/0
LENGTH 38 CM NEDLE SIZE 6 MM Black DoubleArmed Spatulated Needle Curved,
14 S-14 Suture Monofilament
Polyamide 10/0
LENGTH 38 CM NEDLE SIZE 6 MM Black Double Armed Spatulated Needle Curved,
15 S-15 Suture Monofilament
Polyamide 8/0
LENGTH 38 CM NEDLE SIZE 6 MM Black Double Armed Spatulated Needle Curved
Micropoint
16 S-16 Suture Monofilament
Polyamide 9/0
LENGTH 38 CM NEDLE SIZE 6 MM Black Double Armed Spatulated Needle Curved
Micropoint
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
125 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
17 S-17 Suture Monofilament
Polyamide 10/0
LENGTH 38 CM NEDLE SIZE 6 MM Black Double Armed Spatulated Needle Curved
Micropoint
18 S-18 Suture Monofilament
Polypropylene Suture prolene 1/0
Length 45 CM 1/2 CIRCLE TAPER CUTTING NEEDLE 16MM
19 S-19 Suture Monofilament
Polypropylene Suture prolene 2/0
Length 45 CM 1/2 CIRCLE TAPER CUTTING NEEDLE 16MM
20 S-20 Suture Monofilament
Polypropylene Suture prolene 3/0
Length 45 CM 1/2 CIRCLE TAPER CUTTING NEEDLE 16MM
21 S-21 Suture Monofilament
Polypropylene Suture prolene 4/0
Length 45 CM 1/2 CIRCLE TAPER CUTTING NEEDLE 16MM
22 S-22 Suture Monofilament
Polypropylene Suture prolene 5/0
Length 45 CM 1/2 CIRCLE TAPER CUTTING NEEDLE 12MM
23 S-23 Suture Monofilament
Polypropylene Suture prolene 6/0
Length 45 CM 1/2 CIRCLE TAPER CUTTING NEEDLE 12MM
24 S-24 Suture Monofilament
Polypropylene Suture prolene 1/0
Length 45 CM 3/8 CIRCLE TAPER CUTTING NEEDLE 30MM
25 S-25 Suture Monofilament
Polypropylene Suture prolene 2/0
Length 45 CM 3/8 CIRCLE TAPER CUTTING NEEDLE 20MM
26 S-26 Suture Monofilament
Polypropylene Suture prolene 3/0
Length 45 CM 3/8 CIRCLE TAPER CUTTING NEEDLE 16MM
27 S-27 Suture Monofilament
Polypropylene Suture prolene 4/0
Length 45 CM 3/8 CIRCLE TAPER CUTTING NEEDLE 12MM
28 S-28 Suture Monofilament
Polypropylene Suture prolene 5/0
Length 45 CM 3/8 CIRCLE TAPER CUTTING NEEDLE 12MM
29 S-29 Suture Monofilament
Polypropylene Suture prolene 6/0
Length 45 CM 3/8 CIRCLE TAPER CUTTING NEEDLE 10MM
30 S-30 Suture Monofilament
Polypropylene Suture prolene 1/0
Length 90 CM 1/2 CIRCLE TAPER CUTTING NEEDLE 30MM
31 S-31 Suture Monofilament
Polypropylene Suture prolene 2/0
Length 90 CM 1/2 CIRCLE TAPER CUTTING NEEDLE 20MM
32 S-32 Suture Monofilament
Polypropylene Suture prolene 3/0
Length 90 CM 1/2 CIRCLE TAPER CUTTING NEEDLE 16MM
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
126 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
33 S-33 Suture Monofilament
Polypropylene Suture prolene 4/0
Length 90 CM 1/2 CIRCLE TAPER CUTTING NEEDLE 12MM
34 S-34 Suture Monofilament
Polypropylene Suture prolene 5/0
Length 90 CM 1/2 CIRCLE TAPER CUTTING NEEDLE 12MM
35 S-35 Suture Monofilament
Polypropylene Suture prolene 6/0
Length 90 CM 1/2 CIRCLE TAPER CUTTING NEEDLE 10MM
36 S-36 Suture Monofilament
Polypropylene Suture prolene 1/0
Length 90 CM 3/8 CIRCLETAPER CUTTING NEEDLE 30MM
37 S-37 Suture Monofilament
Polypropylene Suture prolene 2/0
Length 90 CM 3/8 CIRCLE TAPER CUTTING NEEDLE 20MM
38 S-38 Suture Monofilament
Polypropylene Suture prolene 3/0
Length 90 CM 3/8 CIRCLE TAPER CUTTING NEEDLE 16MM
39 S-39 Suture Monofilament
Polypropylene Suture prolene 4/0
Length 90 CM 3/8 CIRCLE TAPER CUTTING NEEDLE 16MM
40 S-40 Suture Monofilament
Polypropylene Suture prolene 5/0
Length 90 CM 3/8 CIRCLE TAPER CUTTING NEEDLE 12MM
41 S-41 Suture Monofilament
Polypropylene Suture prolene 6/0
Length 90 CM 3/8 CIRCLE TAPER CUTTING NEEDLE 10MM
42 S-42 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
2 Length 45 cm.size needles 40mm.
1/2circle Taper Cutting
43 S-43 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
1 Length 45 cm.size needles 30mm. 1/2
circle,Taper Cutting
44 S-44 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
1-0 Length 45 cm.size needles 20mm.
1/2circle Taper Cutting
45 S-45 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
2-0 Length 45 cm.size needles 16mm. 1/2
circle,Taper Cutting
46 S-46 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
3-0 Length 45 cm.size needles 12mm.
1/2circle Taper Cutting
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
127 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
47 S-47 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
4-0 Length 45 cm.size needles 12mm. 1/2
circle,Taper Cutting
48 S-48 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
2 Length 45 cm.size needles 40mm.
3/8circle Taper Cutting
49 S-49 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
1 Length 45 cm.size needles 30mm.
3/8circle Taper Cutting
50 S-50 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
1-0 Length 45 cm.size needles 20mm.
3/8circle Taper Cutting
51 S-51 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
2-0 Length 45 cm.size needles 16mm.
3/8circle Taper Cutting
52 S-52 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
3-0 Length 45 cm.size needles 12mm.
3/8circle Taper Cutting
53 S-53 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
4-0 Length 45 cm.size needles 12mm.
3/8circle Taper Cutting
54 S-54 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
2 Length 100 cm.size needles 40mm. 1/2
circle,Taper Cutting
55 S-55 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
1 Length 100 cm.size needles 30mm. 1/2
circle,Taper Cutting
56 S-56
Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
1-0 Length 100 cm.size needles 20mm. 1/2
circle,Taper Cutting
57 S-57 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
2-0 Length 100 cm.size needles 16mm. 1/2
circle,Taper Cutting
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
128 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
58 S-58 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
3-0 Length 100 cm.size needles 12mm. 1/2
circle,Taper Cutting
59 S-59 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
4-0 Length 100 cm.size needles 12mm. 1/2
circle,Taper Cutting
60 S-60 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
2 Length 100 cm.size needles 40mm.
3/8circle Taper Cutting
61 S-61 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
1 Length 100 cm.size needles 30mm.
3/8circle Taper Cutting
62 S-62 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
1-0 Length 100 cm.size needles 20mm.
3/8circle Taper Cutting
63 S-63 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
2-0 Length 100 cm.size needles 16mm.
3/8circle Taper Cutting
64 S-64 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
3-0 Length 100 cm.size needles 12mm.
3/8circle Taper Cutting
65 S-65 Suture Coated (polyglycolic
acid)Polyglactin Braided Synthetic Absorbable Suture
4-0 Length 100 cm.size needles 12mm.
3/8circle Taper Cutting
66 S-66 Suture Chromic Catgut Suture 2 Length 76cm needles 45 mm. 1/2 circle
taper point
67 S-67 Suture Chromic Catgut Suture 1 Length 76cm needles 40 mm. 1/2 circle
taper point
68 S-68 Suture Chromic Catgut Suture 1-0 Length 76cm. needles 30 mm. 1/2
circle taper point
69 S-69 Suture Chromic Catgut Suture 2-0 Length 76cm. needles 30 mm.
,1/2 circle taper point
70 S-70 Suture Chromic Catgut Suture 3-0 Length 76cm. needles 20
mm.1/2circle taper point
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
129 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
71 S-71 Suture Chromic Catgut Suture 2 Length 100cm. needles 45 mm.
1/2 circle taper point
72 S-72 Suture Chromic Catgut Suture 1 Length 100cm. needles 40 mm.
1/2 circle taper point
73 S-73 Suture Chromic Catgut Suture 1-0 Length 100cm. sneedles 30 mm.
1/2 circle taper point
74 S-74 Suture Chromic Catgut Suture 2-0 Length 100cm. needles 30 mm.
,1/2 circle taper point
75 S-75 Suture Chromic Catgut Suture 3-0 Length 100cm. needles 20
mm.1/2circle taper point
76 S-76 Suture Chromic Catgut Suture 2 Length 152cm. needles 45 mm.
1/2 circle taper point
77 S-77 Suture Chromic Catgut Suture 1 Length 152cm. needles 40mm.
1/2 circle taper point
78 S-78 Suture Chromic Catgut Suture 1-0 Length 152cm. needles 30 mm.
1/2 taper point
79 S-79 Suture Chromic Catgut Suture 2-0 Length 152cm. needles 30mm.
,1/2 circle taper point,
80 S-80 Suture Chromic Catgut Suture 3-0 Length 152cm. needles 20
mm.1/2circle taper point
81 S-81 Plain Catgut suture 2 76 cm 3/8 Circle Round Bodied Needle, 30
mm,
82 S-82 Plain Catgut suture 1 76 cm 3/8 Circle Round Bodied Needle, 30
mm,
83 S-83 Plain Catgut suture 1-0 76 cm 3/8 Circle Round Bodied Needle, 20
mm,
84 S-84 Plain Catgut suture 2-0 76 cm 3/8 Circle Round Bodied Needle, 20
mm,
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
130 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
85 S-85 Plain Silk Suture 2 Length 76cm. needles 40mm. 1/2circle
cutting
86 S-86 Plain Silk Suture 1 Length 76cm needle 30mm. 1/2circle
cutting
87 S-87 Plain Silk Suture 1-0 Length 76cm. needle 16mm. 1/2circle
cutting
88 S-88 Plain Silk Suture 2-0 Length 76cm. Needle 16mm. 1/2circle
cutting
89 S-89 Plain Silk Suture 3-0 Length 76cm. needle 12mm. 1/2circle
cutting
90 S-90 Plain Silk Suture 4-0 Length 76cm. needle 12mm. 1/2circle
cutting
91 S-91 Plain Silk Suture 2 Length 76cm. needle 40mm. 3/8circle
cutting
92 S-92 Plain Silk Suture 1 Length 76cm. needle 30mm. 3/8circle
cutting
93 S-93 Plain Silk Suture 1-0 Length 76cm. needle 20mm. 3/8circle
cutting
94 S-94 Plain Silk Suture 2-0 Length 76cm. needle 16mm. 3/8circle
cutting
95 S-95 Plain Silk Suture 3-0 Length 76cm. needle 12mm. 3/8circle
cutting
96 S-96 Plain Silk Suture 4-0 Length 76cm. needle 12mm. 3/8circle
cutting
97 S-97 Plain Silk Suture 2 Length 152cm needle 40mm. 3/8circle
cutting
98 S-98 Plain Silk Suture 1 Length 152cm needle 30mm. 3/8circle
cutting
99 S-99 Plain Silk Suture 1-0 Length 152cm needle 20mm. 3/8circle
cutting
100 S-100 Plain Silk Suture 2-0 Length 152cm needle 16mm. 3/8circle
cutting
101 S-101 Plain Silk Suture 3-0 Length 152cm needle 12mm. 3/8circle
cutting
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
131 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
102 S-102 Plain Silk Suture 4-0 Length 152cm needle 12mm. 3/8circle
cutting
103 S-103 Plain Silk Suture 2 Length 152cm needle 40mm. 1/2circle
cutting
104 S-104 Plain Silk Suture 1 Length 152cm needle 30mm. 1/2circle
cutting
105 S-105 Plain Silk Suture 1-0 Length 152cm needle 20mm. 1/2circle
cutting
106 S-106 Plain Silk Suture 2-0 Length 152cm needle 16mm 1/2circle
cutting
107 S-107 Plain Silk Suture 3-0 Length 152cm needle 12mm. 1/2circle
cutting
108 S-108 Plain Silk Suture 4-0 Length 152cm needle 12mm. 1/2circle
cutting
109 S-109 Suture Braided silk 2 Length 76cm. Needle 40mm. 3/8circle,
cutting
110 S-110 Suture Braided silk 1 Length 76cm. Needle 30mm. 3/8circle,
cutting
111 S-111 Suture Braided silk 1-0 Length 76cm. Needle 20mm. 3/8circle,
cutting
112 S-112 Suture Braided silk 2-0 Length 76cm. Needle 16mm. 3/8circle,
cutting
113 S-113 Suture Braided silk 3-0 Length 76cm. Needle 12mm. 3/8circle,
cutting
114 S-114 Suture Braided silk 4-0 Length 76cm. Needle 12mm. 3/8circle,
cutting
115 S-115 Suture Braided silk 2 Length 76cm. Needle 40mm. 1/2circle
cutting
116 S-116 Suture Braided silk 1 Length 76cm. Needle 30mm. 1/2circle
cutting
117 S-117 Suture Braided silk 1-0 Length 76cm. Needle 20mm. 1/2circle
cutting
118 S-118 Suture Braided silk 2-0 Length 76cm. Needle 16mm. 1/2circle
cutting
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
132 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
119 S-119 Suture Braided silk 3-0 Length 76cm. Needle 12mm. 1/2circle
cutting
120 S-120 Suture Braided silk 4-0 Length 76cm. Needle 12mm. 1/2circle
cutting
121 S-121 Suture Braided Silk 2 Length 152cm needle 40mm. 3/8circle,
cutting
122 S-122 Suture Braided Silk 1 Length 152cm needle 30mm. 3/8circle,
cutting
123 S-123 Suture Braided Silk 1-0 Length 152cm needle 20mm. 3/8circle,
cutting
124 S-124 Suture Braided Silk 2-0 Length 152cm needle 16mm. 3/8circle,
cutting
125 S-125 Suture Braided Silk 3-0 Length 152cm needle 12mm. 3/8circle,
cutting
126 S-126 Suture Braided Silk 4-0 Length 152cm needle 12mm. 3/8circle,
cutting
127 S-127 Suture Braided Silk 2 Length 152cm needle 40mm. 1/2circle
cutting
128 S-128 Suture Braided Silk 1 Length 152cm needle 30mm. 1/2circle
cutting
129 S-129 Suture Braided Silk 1-0 Length 152cm needle 20mm. 1/2circle
cutting
130 S-130 Suture Braided Silk 2-0 Length 152cm needle 16mm. 1/2circle
cutting
131 S-131 Suture Braided Silk 3-0 Length 152cm needle 12mm. 1/2circle
cutting
132 S-132 Suture Braided Silk 4-0 Length 152cm needle 12mm. 1/2circle
cutting
133 S-133 Nylon suture 1/0 100cm 3/8 circleCurved cutting needle
20mm
134 S-134 Nylon suture 2/0 100cm 3/8 circleCurved cutting needle
16mm
135 S-135 Nylon suture 3/0 100cm 3/8 circleCurved cutting needle
12mm
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
133 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
136 S-136 Nylon suture 4/0 100cm 3/8 circleCurved cutting needle
12mm
137 S-137 Nylon suture 5/0 100cm 3/8 circleCurved cutting needle
8mm
138 S-138 Nylon suture 6/0 100cm 3/8 circleCurved cutting needle
8mm
139 S-139 Adhesive Tape 10 Cm x 5 Mt.
140 S-140 Adhesive Tape 7.5 Cm x 5 Mt.
141 S-141 Adhesive Tape 2.5 Cm x 5 Mt.
142 S-142 Adhesive Tape 2.5 Cm x 10 Mt.
143 S-143
Non-Woven Viscose Rayon Porous backing tape with
Synthetic Copolymer Acrylate Hypoallergic Adhesive
7.5 cms 9.14 mtrs
144 S-144 Permeable Non Woven
Hypoallergic Adhesive Tape 7.5 Cm 5 Mt
145 S-145
Semi Permeable Transparent,, Polyurethane water proof post-operative
dressing with a non adherent absorbent pad and picture
frame delivery system.
7cm x 5 cm Box of 100
146 S-146
147 S-147
Semi Permeable Transparent,, Polyurethane water proof post-operative
dressing with a non adherent absorbent pad and picture
frame delivery system.
10cm x 10 cm Box of 20
148 S-148
Semi Permeable Transparent,, Polyurethane water proof post-operative
dressing with a non adherent absorbent pad and picture
10cm x 20cm Box of 10
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
134 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
frame delivery system.
149 S-149
Semi Permeable
Transparent,, Polyurethane water proof post-operative
dressing with a non adherent absorbent pad and picture
frame delivery system.
10cm x 25 cm
150 S-150
151 S-151 Oxidized Regenerated
Cellulose In Sterile Foil Pack 5cmx 7.5cm Box of 10
152 S-152 Oxidized Regenerated
Cellulose In Sterile Foil Pack 10cmX 20cm Box of 10
153 S-153 Oxidized Regenerated
Cellulose In Sterile Foil Pack 5cmx 35cm Box of 10
154 S-154 Hernia Mesh 7.5cmX12.5cmt Box of 10
155 S-155 Hernia Mesh 10cmX15cm Box of 10
156 S-156 Hernia Mesh 15cmx15cm Box of 10
157 S-157 Plaster of Paris bandages 10 cmX 2.7 mtr Box of 10
158 S-158 Plaster of Paris bandages 15cmX 2.7 mtr. Box of 10
159 S-159 Foley' Catheter ( without
urobag) No. 12 As per latest BIS specifications
160 S-160 Foley' Catheter ( without
urobag) No. 14 As per latest BIS specifications
161 S-161 Foley' Catheter ( without
urobag) No. 16 As per latest BIS specifications
162 S-162 Foley' Catheter ( without
urobag) No. 18 As per latest BIS specifications
163 S-163 Foley' Catheter ( without
urobag) No. 20 As per latest BIS specifications
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
135 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
164 S-164 Foley' Catheter ( without
urobag) No. 22 As per latest BIS specifications
165 S-165 Scalp Vein Set:. FG 20 SIZE
Conforming to following specifications: 1. The set should be made of special medical grade non toxic P.V.C. flexible transparent
material with a separate air-vent 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end. The sealing thickness should be
2.5 to 3 mm4. The length of tube should be 30 cm5. The adopter ((Mouth) should be made of flexible P.V.C. and leak proof at the joint of the tubing & transparent &
flexible 6. The quality of tubing should be flexible non toxic medical grade. The I.V.
needle of scalp-vein should be sharp bevel, it should be mounded in a fashion to
provide easy holding while vein puncture, all the joints in the set should be leak-
proof. 7. The needle should be provided with a flexible cap to protect the bevel of needle8. The adopter should be provided
with well fitting closing device.As per latest BIS specifications
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
136 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
166 S-166 Scalp Vein Set:. FG 22 SIZE
Conforming to following specifications: 1. The set should be made of special medical grade non toxic P.V.C. flexible transparent
material with a separate air-vent 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end. The sealing thickness should be
2.5 to 3 mm4. The length of tube should be 30 cm5. The adopter ((Mouth) should be made of flexible P.V.C. and leak proof at the joint of the tubing & transparent &
flexible 6. The quality of tubing should be flexible non toxic medical grade. The I.V.
needle of scalp-vein should be sharp bevel, it should be mounded in a fashion to
provide easy holding while vein puncture, all the joints in the set should be leak-
proof. 7. The needle should be provided with a flexible cap to protect the bevel of needle8. The adopter should be provided
with well fitting closing device.As per latest BIS specifications
167 S-167 Intra venous cannulaWith integrated three way stop
FG 14 45mm
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
137 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
cock
168 S-168 Intra venous cannulaWith integrated three way stop
cock FG 16 45mm
169 S-169 Intra venous cannulaWith integrated three way stop
cock FG 18 45mm
170 S-170 Intra venous cannulaWith integrated three way stop
cock FG20 32mm
171 S-171 Intra venous cannulaWith integrated three way stop
cock FG22 32mm
172 S-172 Intra venous cannulaWith integrated three way stop
cock FG24 25mm
173 S-173 Intra venous cannulaWith integrated three way stop
cock FG26 25mm
174 S-174 Intra venous cannulaWith
safety guard FG 14, 45mm
175 S-175 Intra venous cannulaWith
safety guard FG 16 45mm
176 S-176 Intra venous cannulaWith
safety guard FG 18 45mm
177 S-177 Intra venous cannulaWith
safety guard FG20 32mm
178 S-178 Intra venous cannulaWith
safety guard FG22 32mm
179 S-179 Intra venous cannulaWith
safety guard FG24 25mm
180 S-180 Intra venous cannulaWith
safety guard FG26 25mm
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
138 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
181 S-181 I.V. infusion set with Micro
Drip Appoximately 60
drop/ml
Micro I.V. infusion set for paediatric
use.Conforming to following specifications: 1. The set should be made of special
medical grade non toxic P.V.C. flexible transparent material with a separate air-
vent 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The
pack should be sealed at the both end one cm away from each end. The sealing
thickness should be 2.5 to 3 mm4. The length of tube should be 30 cm5. The adopter ((Mouth) should be made of
flexible P.V.C. and leak proof at the joint of the tubing & transparent & flexible 6. The
quality of tubing should be flexible non toxic medical grade. The I.V. needle of
scalp-vein should be sharp bevel, it should be mounded in a fashion to provide easy
holding while vein puncture, all the joints in the set should be leak-proof. 7. The needle should be provided with a flexible cap to protect the bevel of needle8. The adopter
should be provided with well fitting closing device.As per latest BIS specifications
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
139 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
182 S-182 I.V. infusion set with Micro
Drip Appoximately 30
drop/ml
Micro I.V. infusion set for paediatric
use.Conforming to following specifications: 1. The set should be made of special
medical grade non toxic P.V.C. flexible transparent material with a separate air-
vent 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The
pack should be sealed at the both end one cm away from each end. The sealing
thickness should be 2.5 to 3 mm4. The length of tube should be 30 cm5. The adopter ((Mouth) should be made of
flexible P.V.C. and leak proof at the joint of the tubing & transparent & flexible 6. The
quality of tubing should be flexible non toxic medical grade. The I.V. needle of
scalp-vein should be sharp bevel, it should be mounded in a fashion to provide easy
holding while vein puncture, all the joints in the set should be leak-proof. 7. The needle should be provided with a flexible cap to protect the bevel of needle8. The adopter
should be provided with well fitting closing device.As per latest BIS specifications
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
140 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
183 S-183 I.V. infusion set Appoximately 15
drop/ml
Conforming to following specifications: 1. The set should be made of special medical grade non toxic P.V.C. flexible transparent
material with a separate air-vent 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiated .As per latest BIS specifications
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
141 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
184 S-184 CVP Manometer SET
Conforming to following specifications: 1. The set should be made of special medical grade non toxic P.V.C. flexible transparent
material with a separate air-vent 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end. The sealing thickness should be
2.5 to 3 mm4. The length of tube should be 30 cm5. The adopter ((Mouth) should be made of flexible P.V.C. and leak proof at the joint of the tubing & transparent &
flexible 6. The quality of tubing should be flexible non toxic medical grade. The I.V.
needle of scalp-vein should be sharp bevel, it should be mounded in a fashion to
provide easy holding while vein puncture, all the joints in the set should be leak-
proof. 7. The needle should be provided with a flexible cap to protect the bevel of needle8. The adopter should be provided
with well fitting closing device.As per latest BIS specifications
185 S-185 Double Lumen Polyurethane
Catheter Size - 11.5 FR 12 cm
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
142 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
186 S-186 Double Lumen Polyurethane
Catheter Size - 11.5 FR 15 cm
187 S-187 Double Lumen Polyurethane
Catheter Size - 11.5 FR 20cm
188 S-188 Double Lumen Polyurethane
Catheter Size - 11.5 FR 24 cm
189 S-189 Tracheostomy Tube (cuffed) FG 24 . Balloon with non return valve to facilitate
inflation and deflation of the cuff
190 S-190 Tracheostomy Tube (cuffed) FG 26 . Balloon with non return valve to facilitate
inflation and deflation of the cuff
191 S-191 Tracheostomy Tube (cuffed) FG 28 . Balloon with non return valve to facilitate
inflation and deflation of the cuff
192 S-192 Tracheostomy Tube (cuffed) FG 30 . Balloon with non return valve to facilitate
inflation and deflation of the cuff
193 S-193 Tracheostomy Tube (cuffed) FG 32 . Balloon with non return valve to facilitate
inflation and deflation of the cuff
194 S-194 Tracheostomy Tube (cuffed) FG34 . Balloon with non return valve to facilitate
inflation and deflation of the cuff
195 S-195 Tracheostomy Tube (cuffed) FG 36 . Balloon with non return valve to facilitate
inflation and deflation of the cuff
196 S-196 Tracheostomy Tube (cuffed) FG 38 . Balloon with non return valve to facilitate
inflation and deflation of the cuff
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
143 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
197 S-197 Urine Drainage Catheters FG14
. Soft, Frosted and kink resistant PVC tubing.. Atraumatic, Soft, rounded, closed
tip with two lateral eyes for efficient draiage.. Color coded plain connector for
easy identification of size.
198 S-198 Urine Drainage Catheters FG16
. Soft, Frosted and kink resistant PVC tubing.. Atraumatic, Soft, rounded, closed
tip with two lateral eyes for efficient draiage.. Color coded plain connector for
easy identification of size.
199 S-199 Urine Drainage Catheters FG18
. Soft, Frosted and kink resistant PVC tubing.. Atraumatic, Soft, rounded, closed
tip with two lateral eyes for efficient draiage.. Color coded plain connector for
easy identification of size.
200 S-200 Urine Drainage Catheters FG20
. Soft, Frosted and kink resistant PVC tubing.. Atraumatic, Soft, rounded, closed
tip with two lateral eyes for efficient draiage.. Color coded plain connector for
easy identification of size.
201 S-201 Urine Drainage Catheters FG22
. Soft, Frosted and kink resistant PVC tubing.. Atraumatic, Soft, rounded, closed
tip with two lateral eyes for efficient
draiage.. Color coded plain connector for easy identification of size.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
144 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
202 S-202 Urine Drainage Catheters FG24
. Soft, Frosted and kink resistant PVC tubing.. Atraumatic, Soft, rounded, closed
tip with two lateral eyes for efficient draiage.. Color coded plain connector for
easy identification of size.
203 S-203 Closed Wound Suction Unit FG 12
. Suitable for close wound drainage under negative pressure post operatively with the
option to operate one or two catheters simultaneously.. Graduated Bellow
Chamber.. Size of Bellow Chamber : 600 & 800 ml.
204 S-204 Closed Wound Suction Unit FG 14
. Suitable for close wound drainage under negative pressure post operatively with the
option to operate one or two catheters simultaneously.. Graduated Bellow
Chamber.. Size of Bellow Chamber : 600 ml.
205 S-205 Closed Wound Suction Unit FG 16
. Suitable for close wound drainage under negative pressure post operatively with the
option to operate one or two catheters simultaneously.. Graduated Bellow
Chamber.. Size of Bellow Chamber : 600 ml.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
145 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
206 S-206 Thoracic Drainage Catheter
with Trocar . Size : 8 FG
. Suitable for close wound drainage under negative pressure post operatively with the
option to operate one or two catheters simultaneously.. Graduated Bellow
Chamber.. Size of Bellow Chamber : 600 ml.
207 S-207 Thoracic Drainage Catheter
with Trocar . Size : 10 FG
. Catheter is provided with trocar for easy penetration, placement and handling..
Markings provided at 5, 10, 15 & 20 cm from the last eye to help ascertain depth of placement.. Two lateral eyes for efficient drainage. Proximal end fitted with tapered
connector for easy connection to the drainage bottle.
208 S-208 Thoracic Drainage Catheter
with Trocar . Size : 12 FG
. Catheter is provided with trocar for easy penetration, placement and handling..
Markings provided at 5, 10, 15 & 20 cm from the last eye to help ascertain depth of placement.. Two lateral eyes for efficient drainage. Proximal end fitted with tapered
connector for easy connection to the drainage bottle.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
146 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
209 S-209 Thoracic Drainage Catheter
with Trocar . Size : 14 FG
. Catheter is provided with trocar for easy penetration, placement and handling..
Markings provided at 5, 10, 15 & 20 cm from the last eye to help ascertain depth of placement.. Two lateral eyes for efficient drainage. Proximal end fitted with tapered
connector for easy connection to the drainage bottle.
210 S-210 Thoracic Drainage Catheter
with Trocar . Size : 16 FG
. Catheter is provided with trocar for easy penetration, placement and handling..
Markings provided at 5, 10, 15 & 20 cm from the last eye to help ascertain depth of placement.. Two lateral eyes for efficient
drainage. Proximal end fitted with tapered connector for easy connection to the
drainage bottle.
211 S-211 Thoracic Drainage Catheter
with Trocar . Size 18 FG
. Catheter is provided with trocar for easy penetration, placement and handling..
Markings provided at 5, 10, 15 & 20 cm from the last eye to help ascertain depth of placement.. Two lateral eyes for efficient drainage. Proximal end fitted with tapered
connector for easy connection to the drainage bottle.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
147 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
212 S-212 Thoracic Drainage Catheter
with Trocar . Size : 20 FG
. Catheter is provided with trocar for easy penetration, placement and handling..
Markings provided at 5, 10, 15 & 20 cm from the last eye to help ascertain depth of placement.. Two lateral eyes for efficient drainage. Proximal end fitted with tapered
connector for easy connection to the drainage bottle.
213 S-213 Thoracic Drainage Catheter
with Trocar . Size : 22 FG
. Catheter is provided with trocar for easy penetration, placement and handling..
Markings provided at 5, 10, 15 & 20 cm from the last eye to help ascertain depth of placement.. Two lateral eyes for efficient
drainage. Proximal end fitted with tapered connector for easy connection to the
drainage bottle.
214 S-214 Thoracic Drainage Catheter
with Trocar . Size : 24 FG
. Catheter is provided with trocar for easy penetration, placement and handling..
Markings provided at 5, 10, 15 & 20 cm from the last eye to help ascertain depth of placement.. Two lateral eyes for efficient drainage. Proximal end fitted with tapered
connector for easy connection to the drainage bottle.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
148 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
215 S-215 Thoracic Drainage Catheter
with Trocar . Size : 26 FG
. Catheter is provided with trocar for easy penetration, placement and handling..
Markings provided at 5, 10, 15 & 20 cm from the last eye to help ascertain depth of placement.. Two lateral eyes for efficient drainage. Proximal end fitted with tapered
connector for easy connection to the drainage bottle.
216 S-216 Thoracic Drainage Catheter
with Trocar . Size : 28 FG
. Catheter is provided with trocar for easy penetration, placement and handling..
Markings provided at 5, 10, 15 & 20 cm from the last eye to help ascertain depth of placement.. Two lateral eyes for efficient
drainage. Proximal end fitted with tapered connector for easy connection to the
drainage bottle.
217 S-217 Thoracic Drainage Catheter
with Trocar . Size : 30 FG
. Catheter is provided with trocar for easy penetration, placement and handling..
Markings provided at 5, 10, 15 & 20 cm from the last eye to help ascertain depth of placement.. Two lateral eyes for efficient drainage. Proximal end fitted with tapered
connector for easy connection to the drainage bottle.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
149 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
218 S-218 Thoracic Drainage Catheter
with Trocar . Size 32 FG
. Catheter is provided with trocar for easy penetration, placement and handling..
Markings provided at 5, 10, 15 & 20 cm from the last eye to help ascertain depth of placement.. Two lateral eyes for efficient drainage. Proximal end fitted with tapered
connector for easy connection to the drainage bottle.
219 S-219 Thoracic Drainage Catheter
with Trocar . Size : 34 FG
. Catheter is provided with trocar for easy penetration, placement and handling..
Markings provided at 5, 10, 15 & 20 cm from the last eye to help ascertain depth of placement.. Two lateral eyes for efficient
drainage. Proximal end fitted with tapered connector for easy connection to the
drainage bottle.
220 S-220 Thoracic Drainage Catheter
with Trocar . Size : 36 FG
. Catheter is provided with trocar for easy penetration, placement and handling..
Markings provided at 5, 10, 15 & 20 cm from the last eye to help ascertain depth of placement.. Two lateral eyes for efficient drainage. Proximal end fitted with tapered
connector for easy connection to the drainage bottle.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
150 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
221 S-221 Thoracic Drainage Catheter
with Trocar . Size 38 FG
. Catheter is provided with trocar for easy penetration, placement and handling..
Markings provided at 5, 10, 15 & 20 cm from the last eye to help ascertain depth of placement.. Two lateral eyes for efficient drainage. Proximal end fitted with tapered
connector for easy connection to the drainage bottle.
222 S-222 Thoracic Drainage Catheter
with Trocar . Size 40 FG
. Catheter is provided with trocar for easy penetration, placement and handling..
Markings provided at 5, 10, 15 & 20 cm from the last eye to help ascertain depth of placement.. Two lateral eyes for efficient
drainage. Proximal end fitted with tapered connector for easy connection to the
drainage bottle.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
151 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
223 S-223 Peritoneal Dialysis Set Adult Model.
. Suitable for performing peritoneal dialysis in patients of all age groups.. Perforated open-end catheter manufactured from polypropylene.. Stainless steel trocar is
provided to facilitate smooth penetration.. Scalpel blade is provided for the incision. The Trocar and the tip of the catheter are perfectly matched to facilitate trauma free insertion.. Latex flash bulb is provided on
the junction unit for additional medication.. Complete kit comes in tray pack in peelable
pouch.
224 S-224 Peritoneal Dialysis Set Child Model.
. Suitable for performing peritoneal dialysis in patients of all age groups.. Perforated open-end catheter manufactured from polypropylene.. Stainless steel trocar is
provided to facilitate smooth penetration.. Scalpel blade is provided for the incision. The Trocar and the tip of the catheter are perfectly matched to facilitate trauma free insertion.. Latex flash bulb is provided on
the junction unit for additional medication..
Complete kit comes in tray pack in peelable pouch.
225 S-225 Gauze Than : As per Schedule
F-II of Drugs & Cosmetics Rules, 1945
60 cm x18 mtr 3mm mesh
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
152 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
226 S-226 Gauze Than : As per Schedule
F-II of Drugs & Cosmetics Rules, 1945
45 cm x 18 mtr 3mm mesh
227 S-227 Rolled Bandage As per
Schedule F-II of Drugs & Cosmetics Rules, 1945
7.5 Cm x 5 Mt. 1mm mesh
228 S-228 Rolled Bandage As per
Schedule F-II of Drugs & Cosmetics Rules, 1945
10 Cm x 5 Mt. 1mm mesh
229 S-229 Rolled Bandage As per
Schedule F-II of Drugs & Cosmetics Rules, 1945
15 cm x 5 Mt. 1mm mesh
230 S-230 Bandage Than As per
Schedule F-II of Drugs & Cosmetics Rules, 1945
100 cm x20 mtr 2mm mesh
231 S-231 Bandage Than As per
Schedule F-II of Drugs & Cosmetics Rules, 1945
45 cm x 18 mtr 2mm mesh
232 S-232 Absobent Cotton I.P. Wool 500 gm. LAYERED COTTON PACK . EVERY LAYER MUST BE SEPERATED BY A THIN PAPER
SHEET
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
153 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
233 S-233 Insuline Syringe Fixed Needle 1 ml, 40 U
Each syringe should separately HDPE card board packing and be Gamma sterilized
E.T.O. the washer of the syringe should be
non toxic medical grade.Needle should be properly protected. The product and package should be designed as an
integrated unit. The package should be sealed with a good heat sealing machine so
that the seal with is not less than 2 to 3 mm the body of the packing material as
well as the seal should not contain pinholes.As per latest BIS specifications
234 S-234 Mucous extractor
235 S-235 tubal rings
236 S-236 IUCD 380A
237 S-237 IUCD 375
238 S-238 BONE CEMENT 40G powder with
sterile liquid
Powder containing poly methyl methacrylate copolymer(PMMA) with Benzoylperoxide(BPO) initiator and Zirconium Dioxide(ZrO2)Antibiotic
Gentamycine and liquid containing monomer Methyl methacrylate(MMA)
withNN-Dimethylpara Toluidine(DMPT) acceleratorand Hydroquinone Stabilizer.
239 S-239 SURGICAL BONE WAX 2.5G
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
154 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
240 S-240 DISPOSABLE NEEDLE FG 16 As per latest BIS specifications
241 S-241 DISPOSABLE NEEDLE FG 18 As per latest BIS specifications
242 S-242 DISPOSABLE NEEDLE FG 20 As per latest BIS specifications
243 S-243 DISPOSABLE NEEDLE FG 22 As per latest BIS specifications
244 S-244 DISPOSABLE NEEDLE FG 23 As per latest BIS specifications
245 S-245 DISPOSABLE NEEDLE FG 24 As per latest BIS specifications
246 S-246 DISPOSABLE NEEDLE FG 25 As per latest BIS specifications
247 S-247 DISPOSABLE NEEDLE FG 26 As per latest BIS specifications
248 S-248 INFANT FEEDING TUBE FG 5
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible
transparent material with a radio opaqque marker line all along 2. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be sealed at the both
end one cm away from each end. The sealing thickness should be 2.5 to 3 mm4. The adopter ((Mouth) should be made of
flexible P.V.C. and leak proof at the joint of the tubing & transparent & flexible 5. The
adopter should be provided with well fitting
closing device
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
155 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
249 S-249 INFANT FEEDING TUBE FG 6
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque
marker line all along 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be sealed at the both
end one cm away from each end. The sealing thickness should be 2.5 to 3 mm4. The adopter ((Mouth) should be made of
flexible P.V.C. and leak proof at the joint of the tubing & transparent & flexible 5. The
adopter should be provided with well fitting
closing device
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
156 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
250 S-250 INFANT FEEDING TUBE FG 7
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque
marker line all along 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be sealed at the both
end one cm away from each end. The sealing thickness should be 2.5 to 3 mm4. The adopter ((Mouth) should be made of
flexible P.V.C. and leak proof at the joint of the tubing & transparent & flexible 5. The
adopter should be provided with well fitting
closing device
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
157 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
251 S-251 INFANT FEEDING TUBE FG 8
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque
marker line all along 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be sealed at the both
end one cm away from each end. The sealing thickness should be 2.5 to 3 mm4. The adopter ((Mouth) should be made of
flexible P.V.C. and leak proof at the joint of the tubing & transparent & flexible 5. The
adopter should be provided with well fitting
closing device
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
158 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
252 S-252 INFANT FEEDING TUBE FG 9
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque
marker line all along 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be sealed at the both
end one cm away from each end. The sealing thickness should be 2.5 to 3 mm4. The adopter ((Mouth) should be made of
flexible P.V.C. and leak proof at the joint of the tubing & transparent & flexible 5. The
adopter should be provided with well fitting
closing device
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
159 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
253 S-253 INFANT FEEDING TUBE FG 10
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque
marker line all along 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be sealed at the both
end one cm away from each end. The sealing thickness should be 2.5 to 3 mm4. The adopter ((Mouth) should be made of
flexible P.V.C. and leak proof at the joint of the tubing & transparent & flexible 5. The
adopter should be provided with well fitting
closing device
254 S-254 DISPOSABLE SYRINGE
WITHOUT NEEDLE 10 ml
Each syringe should separately HDPE card board packing and be Gamma sterilized
E.T.O. the washer of the syringe should be non toxic medical grade.The product and
package should be designed as an integrated unit. The package should be
sealed with a good heat sealing machine so that the seal with is not less than 2 to 3 mm the body of the packing material as
well as the seal should not contain pinholes.As per latest BIS specifications.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
160 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
255 S-255 DISPOSABLE SYRINGE
WITHOUT NEEDLE 2 ml
Each syringe should separately HDPE card board packing and be Gamma sterilized
E.T.O. the washer of the syringe should be non toxic medical grade.The product and
package should be designed as an integrated unit. The package should be
sealed with a good heat sealing machine so that the seal with is not less than 2 to 3 mm the body of the packing material as
well as the seal should not contain pinholes.As per latest BIS specifications.
256 S-256 DISPOSABLE SYRINGE
WITHOUT NEEDLE 3 ml
Each syringe should separately HDPE card board packing and be Gamma sterilized
E.T.O. the washer of the syringe should be non toxic medical grade.The product and
package should be designed as an integrated unit. The package should be
sealed with a good heat sealing machine so that the seal with is not less than 2 to 3 mm the body of the packing material as
well as the seal should not contain pinholes.As per latest BIS specifications.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
161 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
257 S-257 DISPOSABLE SYRINGE
WITHOUT NEEDLE 20ml
Each syringe should separately HDPE card board packing and be Gamma sterilized
E.T.O. the washer of the syringe should be non toxic medical grade.The product and
package should be designed as an integrated unit. The package should be
sealed with a good heat sealing machine so that the seal with is not less than 2 to 3 mm the body of the packing material as
well as the seal should not contain pinholes.As per latest BIS specifications.
258 S-258 DISPOSABLE SYRINGE
WITHOUT NEEDLE 5 ml
Each syringe should separately HDPE card board packing and be Gamma sterilized
E.T.O. the washer of the syringe should be non toxic medical grade.The product and
package should be designed as an integrated unit. The package should be
sealed with a good heat sealing machine so that the seal with is not less than 2 to 3 mm the body of the packing material as
well as the seal should not contain pinholes.As per latest BIS specifications.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
162 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
259 S-259 DISPOSABLE SYRINGE
WITHOUT NEEDLE 50 ml
Each syringe should separately HDPE card board packing and be Gamma sterilized
E.T.O. the washer of the syringe should be non toxic medical grade.The product and
package should be designed as an integrated unit. The package should be
sealed with a good heat sealing machine so that the seal with is not less than 2 to 3 mm the body of the packing material as
well as the seal should not contain pinholes.As per latest BIS specifications.
260 S-260 INSULIN NEEDLE 26Gx4mm As per latest BIS specifications
261 S-261 INSULIN NEEDLE 28Gx4mm As per latest BIS specifications
262 S-262 INSULIN NEEDLE 30Gx4mm As per latest BIS specifications
263 S-263 INSULIN NEEDLE 32G x4mm As per latest BIS specifications
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
163 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
264 S-264 RYLES TUBE FG 10
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque
marker line all along 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be sealed at the both
end one cm away from each end. The sealing thickness should be 2.5 to 3 mm4. The adopter ((Mouth) should be made of
flexible P.V.C. and leak proof at the joint of the tubing & transparent & flexible 5. The
adopter should be provided with well fitting
closing device
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
164 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
265 S-265 RYLES TUBE FG 12
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque
marker line all along 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be sealed at the both
end one cm away from each end. The sealing thickness should be 2.5 to 3 mm4. The adopter ((Mouth) should be made of
flexible P.V.C. and leak proof at the joint of the tubing & transparent & flexible 5. The
adopter should be provided with well fitting
closing device
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
165 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
266 S-266 RYLES TUBE FG14
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque
marker line all along 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be sealed at the both
end one cm away from each end. The sealing thickness should be 2.5 to 3 mm4. The adopter ((Mouth) should be made of
flexible P.V.C. and leak proof at the joint of the tubing & transparent & flexible 5. The
adopter should be provided with well fitting
closing device
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
166 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
267 S-267 RYLES TUBE FG 16
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque
marker line all along 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be sealed at the both
end one cm away from each end. The sealing thickness should be 2.5 to 3 mm4. The adopter ((Mouth) should be made of
flexible P.V.C. and leak proof at the joint of the tubing & transparent & flexible 5. The
adopter should be provided with well fitting
closing device
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
167 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
268 S-268 RYLES TUBE FG 18
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible
transparent material with a radio opaqque marker line all along 2. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be sealed at the both end one cm away from each end. 4. The
adopter ((Mouth) should be made of flexible P.V.C. and leak proof at the joint of the tubing & transparent & flexible 5. The
adopter should be provided with well fitting closing device
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
168 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
269 S-269 RYLES TUBE FG 20
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque
marker line all along 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be sealed at the both
end one cm away from each end. The sealing thickness should be 2.5 to 3 mm4. The adopter ((Mouth) should be made of
flexible P.V.C. and leak proof at the joint of the tubing & transparent & flexible 5. The
adopter should be provided with well fitting
closing device
270 S-270 SPINAL NEEDLE FG22 As per latest BIS specifications
271 S-271 SPINAL NEEDLE FG23 As per latest BIS specifications
272 S-272 SPINAL NEEDLE FG24 As per latest BIS specifications
273 S-273 SPINAL NEEDLE FG25 As per latest BIS specifications
274 S-274 UROBAG
275 S-275 FLATTUS TUBE FG 12
276 S-276 FLATTUS TUBE FG 16
277 S-277 FLATTUS TUBE FG 20
278 S-278 FLATTUS TUBE FG 22
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
169 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
279 S-279 ENDOTRACHEAL TUBE
CUFFED 2.5mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be sealed at the both
end one cm away from each end.
280 S-280 ENDOTRACHEAL TUBE
CUFFED 3mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray.
4. The pack should be sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
170 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
281 S-281 ENDOTRACHEAL TUBE
CUFFED 3.5mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be sealed at the both
end one cm away from each end.
282 S-282 ENDOTRACHEAL TUBE
CUFFED 4mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray.
4. The pack should be sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
171 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
283 S-283 ENDOTRACHEAL TUBE
CUFFED 4.5mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be sealed at the both
end one cm away from each end.
284 S-284 ENDOTRACHEAL TUBE
CUFFED 5mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray.
4. The pack should be sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
172 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
285 S-285 ENDOTRACHEAL TUBE
CUFFED 5.5mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be sealed at the both
end one cm away from each end.
286 S-286 ENDOTRACHEAL TUBE
CUFFED 6mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray.
4. The pack should be sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
173 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
287 S-287 ENDOTRACHEAL TUBE
CUFFED 6.5mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be sealed at the both
end one cm away from each end.
288 S-288 ENDOTRACHEAL TUBE
CUFFED 7mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray.
4. The pack should be sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
174 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
289 S-289 ENDOTRACHEAL TUBE
CUFFED 7.5mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be sealed at the both
end one cm away from each end.
290 S-290 ENDOTRACHEAL TUBE
CUFFED 8mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray.
4. The pack should be sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
175 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
291 S-291 ENDOTRACHEAL TUBE
CUFFED 8.5mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be sealed at the both
end one cm away from each end.
292 S-292 ENDOTRACHEAL TUBE
CUFFED 9mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray.
4. The pack should be sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
176 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
293 S-293 ENDOTRACHEAL TUBE
CUFFED 9.5mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be sealed at the both
end one cm away from each end.
294 S-294 ENDOTRACHEAL TUBE
CUFFED 10mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray.
4. The pack should be sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
177 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
295 S-295 ENDOTRACHEAL TUBE
CUFFED 10.5mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be sealed at the both
end one cm away from each end.
296 S-296 ENDOTRACHEAL TUBE
CUFFED 11mm
Conforming to following specifications: 1. The tube should be made of special
medical grade non toxic P.V.C. flexible transparent material with a radio opaqque marker line all along 2.Balloon with non
return valve to facilitate inflation and deflation of the cuff 3. It should be
sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray.
4. The pack should be sealed at the both end one cm away from each end.
297 S-297 HANDSCRUB 100ml Waterless Alchohal based Chlorhexidine Gluconate 0.5%w/v and Ethyl Aclohol IP
70%v/v
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
178 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
298 S-298 HANDSCRUB 500ml Waterless Alchohal based Chlorhexidine Gluconate 0.5%w/v and Ethyl Aclohol IP
70%v/v
299 S-299 HANDSCRUB 2.5lt
Waterless Alchohal based Propanol IP 75%w/W, Ethyl-hexadecy-dimethyl-
ammonium ethylsulphate 0-2%w/w with moisturisers and emollients.
300 S-300 HANDSCRUB 500ml
Waterless Alchohal based Propanol IP 75%w/W, Ethyl-hexadecy-dimethyl-
ammonium ethylsulphate 0-2%w/w with moisturisers and emollients.
301 S-301 STERILE PARAFFIN GAUZE 3x3 inch Box of 100
302 S-302 ELASTIC PLAST ADHESSIVE
TAPE 5cmX4/6Mt Stretched length 6mtr
303 S-303 ELASTIC PLAST ADHESSIVE
TAPE 7.5cmX4/6Mt Stretched length 6mtr
304 S-304 ELASTIC PLAST ADHESSIVE
TAPE 10cmX4/6Mt Stretched length 6mtr
305 S-305 ELASTIC PLAST ADHESSIVE
TAPE 12.5cmX4/6Mt Stretched length 6mtr
306 S-306 ELASTIC PLAST ADHESSIVE
TAPE 15cmX4/6Mt Stretched length 6mtr
307 S-307 ABSORBABLE GELATINE
FOAM 80mmX50mmx10mm
308 S-308 ABSORBABLE GELATINE
FOAM 80mmX50mmx7mm
309 S-309 ABSORBABLE GELATINE
FOAM 20mmx20mmx7mm
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
179 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
310 S-310 DISPOSABLE SYRINGE ALONG WITH NEEDLE
1 ml
Each syringe should separately HDPE card board packing and be Gamma sterilized
E.T.O. the washer of the syringe should be
non toxic medical grade.Needle should be properly protected. The product and package should be designed as an
integrated unit. The package should be sealed with a good heat sealing machine so
that the seal with is not less than 2 to 3 mm the body of the packing material as
well as the seal should not contain pinholes.As per latest BIS specifications.
311 S-311 DISPOSABLE SYRINGE ALONG WITH NEEDLE
10 ml
Each syringe should separately HDPE card board packing and be Gamma sterilized
E.T.O. the washer of the syringe should be non toxic medical grade.Needle should be
properly protected. The product and package should be designed as an
integrated unit. The package should be sealed with a good heat sealing machine so
that the seal with is not less than 2 to 3
mm the body of the packing material as well as the seal should not contain
pinholes.As per latest BIS specifications.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
180 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
312 S-312 DISPOSABLE SYRINGE ALONG WITH NEEDLE
2 ml
Each syringe should separately HDPE card board packing and be Gamma sterilized
E.T.O. the washer of the syringe should be
non toxic medical grade.Needle should be properly protected. The product and package should be designed as an
integrated unit. The package should be sealed with a good heat sealing machine so
that the seal with is not less than 2 to 3 mm the body of the packing material as
well as the seal should not contain pinholes.As per latest BIS specifications.
313 S-313 DISPOSABLE SYRINGE ALONG WITH NEEDLE
3 ml
Each syringe should separately HDPE card board packing and be Gamma sterilized
E.T.O. the washer of the syringe should be non toxic medical grade.Needle should be
properly protected. The product and package should be designed as an
integrated unit. The package should be sealed with a good heat sealing machine so
that the seal with is not less than 2 to 3
mm the body of the packing material as well as the seal should not contain
pinholes.As per latest BIS specifications.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
181 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
314 S-314 DISPOSABLE SYRINGE ALONG WITH NEEDLE
20ml
Each syringe should separately HDPE card board packing and be Gamma sterilized
E.T.O. the washer of the syringe should be
non toxic medical grade.Needle should be properly protected. The product and package should be designed as an
integrated unit. The package should be sealed with a good heat sealing machine so
that the seal with is not less than 2 to 3 mm the body of the packing material as
well as the seal should not contain pinholes.As per latest BIS specifications.
315 S-315 DISPOSABLE SYRINGE ALONG WITH NEEDLE
5 ml
Each syringe should separately HDPE card board packing and be Gamma sterilized
E.T.O. the washer of the syringe should be non toxic medical grade.Needle should be
properly protected. The product and package should be designed as an
integrated unit. The package should be sealed with a good heat sealing machine so
that the seal with is not less than 2 to 3 mm the body of the packing material as
well as the seal should not contain pinholes.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
182 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
316 S-316 DISPOSABLE SYRINGE ALONG WITH NEEDLE
50 ml
Each syringe should separately HDPE card board packing and be Gamma sterilized
E.T.O. the washer of the syringe should be
non toxic medical grade.Needle should be properly protected. The product and package should be designed as an
integrated unit. The package should be sealed with a good heat sealing machine so
that the seal with is not less than 2 to 3 mm the body of the packing material as
well as the seal should not contain pinholes.As per latest BIS specifications.
317 S-317 ENDOTRACHEAL TUBE
CUFFED 2.5mm
Each syringe should separately HDPE card board packing and be Gamma sterilized
E.T.O. the washer of the syringe should be non toxic medical grade.Needle should be
properly protected. The product and package should be designed as an
integrated unit. The package should be sealed with a good heat sealing machine so
that the seal with is not less than 2 to 3 mm the body of the packing material as
well as the seal should not contain pinholes.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
183 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
318 S-318 ENDOTRACHEAL TUBE
CUFFED 3mm
Each syringe should separately HDPE card board packing and be Gamma sterilized
E.T.O. the washer of the syringe should be non toxic medical grade.Needle should be
properly protected. The product and package should be designed as an
integrated unit. The package should be sealed with a good heat sealing machine so
that the seal with is not less than 2 to 3 mm the body of the packing material as
well as the seal should not contain pinholes.
319 S-319 ENDOTRACHEAL TUBE
CUFFED 3.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with radioopaque marker line all along.
2..Balloon with non return valve to facilitate inflation and deflation of the cuff3. It
should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
184 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
320 S-320 ENDOTRACHEAL TUBE
CUFFED 4mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with radioopaque marker line all along.
2..Balloon with non return valve to facilitate inflation and deflation of the cuff3. It
should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be
sealed at the both end one cm away from each end.
321 S-321 ENDOTRACHEAL TUBE
CUFFED 4.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with radioopaque marker line all along.
2..Balloon with non return valve to facilitate inflation and deflation of the cuff3. It
should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
185 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
322 S-322 ENDOTRACHEAL TUBE
CUFFED 5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with radioopaque marker line all along.
2..Balloon with non return valve to facilitate inflation and deflation of the cuff3. It
should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be
sealed at the both end one cm away from each end.
323 S-323 ENDOTRACHEAL TUBE
CUFFED 5.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with radioopaque marker line all along.
2..Balloon with non return valve to facilitate inflation and deflation of the cuff3. It
should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
186 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
324 S-324 ENDOTRACHEAL TUBE
CUFFED 6mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with radioopaque marker line all along.
2..Balloon with non return valve to facilitate inflation and deflation of the cuff3. It
should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be
sealed at the both end one cm away from each end.
325 S-325 ENDOTRACHEAL TUBE
CUFFED 6.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with radioopaque marker line all along.
2..Balloon with non return valve to facilitate inflation and deflation of the cuff3. It
should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
187 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
326 S-326 ENDOTRACHEAL TUBE
CUFFED 7mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with radioopaque marker line all along.
2..Balloon with non return valve to facilitate inflation and deflation of the cuff3. It
should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be
sealed at the both end one cm away from each end.
327 S-327 ENDOTRACHEAL TUBE
CUFFED 7.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with radioopaque marker line all along.
2..Balloon with non return valve to facilitate inflation and deflation of the cuff3. It
should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
188 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
328 S-328 ENDOTRACHEAL TUBE
CUFFED 8mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with radioopaque marker line all along.
2..Balloon with non return valve to facilitate inflation and deflation of the cuff3. It
should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be
sealed at the both end one cm away from each end.
329 S-329 ENDOTRACHEAL TUBE
CUFFED 8.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with radioopaque marker line all along.
2..Balloon with non return valve to facilitate inflation and deflation of the cuff3. It
should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
189 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
330 S-330 ENDOTRACHEAL TUBE
CUFFED 9mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with radioopaque marker line all along.
2..Balloon with non return valve to facilitate inflation and deflation of the cuff3. It
should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be
sealed at the both end one cm away from each end.
331 S-331 ENDOTRACHEAL TUBE
CUFFED 9.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with radioopaque marker line all along.
2..Balloon with non return valve to facilitate inflation and deflation of the cuff3. It
should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
190 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
332 S-332 ENDOTRACHEAL TUBE
CUFFED 10mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with radioopaque marker line all along.
2..Balloon with non return valve to facilitate inflation and deflation of the cuff3. It
should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be
sealed at the both end one cm away from each end.
333 S-333 ENDOTRACHEAL TUBE
CUFFED 10.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with radioopaque marker line all along.
2..Balloon with non return valve to facilitate inflation and deflation of the cuff3. It
should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
191 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
334 S-334 ENDOTRACHEAL TUBE
CUFFED 11mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with radioopaque marker line all along.
2..Balloon with non return valve to facilitate inflation and deflation of the cuff3. It
should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 4. The pack should be
sealed at the both end one cm away from each end.
335 S-335 ENDOTRACHEAL TUBE NON
CUFFED 2.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
192 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
336 S-336 ENDOTRACHEAL TUBE NON
CUFFED 3mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
337 S-337 ENDOTRACHEAL TUBE NON
CUFFED 3.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
193 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
338 S-338 ENDOTRACHEAL TUBE NON
CUFFED 4mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
339 S-339 ENDOTRACHEAL TUBE NON
CUFFED 4.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
194 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
340 S-340 ENDOTRACHEAL TUBE NON
CUFFED 5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
341 S-341 ENDOTRACHEAL TUBE NON
CUFFED 5.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
195 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
342 S-342 ENDOTRACHEAL TUBE NON
CUFFED 6mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
343 S-343 ENDOTRACHEAL TUBE NON
CUFFED 6.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
196 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
344 S-344 ENDOTRACHEAL TUBE NON
CUFFED 7mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
345 S-345 ENDOTRACHEAL TUBE NON
CUFFED 7.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
197 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
346 S-346 ENDOTRACHEAL TUBE NON
CUFFED 8mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
347 S-347 ENDOTRACHEAL TUBE NON
CUFFED 8.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
198 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
348 S-348 ENDOTRACHEAL TUBE NON
CUFFED 9mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
349 S-349 ENDOTRACHEAL TUBE NON
CUFFED 9.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
199 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
350 S-350 ENDOTRACHEAL TUBE NON
CUFFED 10mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
351 S-351 ENDOTRACHEAL TUBE NON
CUFFED 10.5mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
200 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
352 S-352 ENDOTRACHEAL TUBE NON
CUFFED 11mm
Conforming to following specifications: 1. The tube should be made of special medical grade non toxic rubber. with
radioopaque marker line all along. 2. It should be sterilised in a polythene pack of 300 gauge thickness by Gamma, E.T.O.
irradiation to a minimum dose of 2.5 mrad or 2.5 kg gray. 3. The pack should be
sealed at the both end one cm away from each end.
353 S-353 INTRA OCULAR LENS POSTERIOR CHAMBER
12.5MM DIAMETER /5.5 mm OPTICS
POLYHYDROXYETHYLMETHACRYLATEWITH MODIFIED C LOOP POWER 15 D TO 28 D
WITH 0.5D INCREMENT
354 S-354 INTRA OCULAR LENS POSTERIOR CHAMBER
13MM DIAMETER/5.5mm
OPTICS
POLYHYDROXYETHYLMETHACRYLATE WITH MODIFIED C LOOP POWER 15 D TO
28 D WITH 0.5D INCREMENT
355 S-355 INTRA OCULAR LENS POSTERIOR CHAMBER
13.5MM DIAMETER /5.5 mm OPTICS
POLYHYDROXYETHYLMETHACRYLATE WITH MODIFIED C LOOP POWER 15 D TO
28 D WITH 0.5D INCREMENT
356 S-356 INTRA OCULAR LENS POSTERIOR CHAMBER
12.5MM DIAMETER /6 mm OPTICS
POLYHYDROXYETHYLMETHACRYLATEWITH MODIFIED C LOOP POWER 15 D TO 28 D
WITH 0.5D INCREMENT
357 S-357 INTRA OCULAR LENS POSTERIOR CHAMBER
13MM DIAMETER/6 mm OPTICS
POLYHYDROXYETHYLMETHACRYLATE WITH MODIFIED C LOOP POWER 15 D TO
28 D WITH 0.5D INCREMENT
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
201 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
358 S-358 INTRA OCULAR LENS POSTERIOR CHAMBER
13.5MM DIAMETER /6 mm OPTICS
POLYHYDROXYETHYLMETHACRYLATE WITH MODIFIED C LOOP POWER 15 D TO
28 D WITH 0.5D INCREMENT
359 S-359 INTRA OCULAR LENS POSTERIOR CHAMBER
12.5MM DIAMETER /6.5 mm OPTICS
POLYHYDROXYETHYLMETHACRYLATE
WITH MODIFIED C LOOP POWER 15 D TO 28 D WITH 0.5D INCREMENT
360 S-360 INTRA OCULAR LENS POSTERIOR CHAMBER
13MM DIAMETER /6.5 mm OPTICS
POLYHYDROXYETHYLMETHACRYLATE WITH MODIFIED C LOOP POWER 15 D TO
28 D WITH 0.5D INCREMENT
361 S-361 INTRA OCULAR LENS POSTERIOR CHAMBER
13.5MM DIAMETER /6.5 mm OPTICS
POLYHYDROXYETHYLMETHACRYLATE WITH MODIFIED C LOOP POWER 15 D TO
28 D WITH 0.5D INCREMENT
362 S-362 INTRA OCULAR LENS POSTERIOR CHAMBER
(FOLDABLE)
12.5mm DIAMETER/5.5 mm
OPTICS
HYDROPHILLIC ACRYLIC WITH INJECTOR UNIT WITH POWER 15D TO 28 D WITH
0.5D INCREMENT
363 S-363 INTRA OCULAR LENS POSTERIOR CHAMBER
(FOLDABLE)
13mm DIAMETER /5.5 mm OPTICS
HYDROPHILLIC ACRYLIC WITH INJECTOR UNIT WITH POWER 15D TO 28 D WITH
0.5D INCREMENT
364 S-364 INTRA OCULAR LENS POSTERIOR CHAMBER
(FOLDABLE)
13.5mm DIAMETER/5.5 mm
OPTICS
HYDROPHILLIC ACRYLIC WITH INJECTOR UNIT WITH POWER 15D TO 28 D WITH
0.5D INCREMENT
365 S-365 INTRA OCULAR LENS POSTERIOR CHAMBER
(FOLDABLE)
12.5mm DIAMETER/6 mm
OPTICS
HYDROPHILLIC ACRYLIC WITH INJECTOR UNIT WITH POWER 15D TO 28 D WITH
0.5D INCREMENT
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
202 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
366 S-366 INTRA OCULAR LENS POSTERIOR CHAMBER
(FOLDABLE)
13mm DIAMETER /6 mm OPTICS
HYDROPHILLIC ACRYLIC WITH INJECTOR UNIT WITH POWER 15D TO 28 D WITH
0.5D INCREMENT
367 S-367
INTRA OCULAR LENS
POSTERIOR CHAMBER (FOLDABLE)
13.5mm
DIAMETER/6 mm OPTICS
HYDROPHILLIC ACRYLIC WITH INJECTOR
UNIT WITH POWER 15D TO 28 D WITH 0.5D INCREMENT
368 S-368 INTRA OCULAR LENS POSTERIOR CHAMBER
(FOLDABLE)
12.5mm DIAMETER/6.5 mm
OPTICS
HYDROPHILLIC ACRYLIC WITH INJECTOR UNIT WITH POWER 15D TO 28 D WITH
0.5D INCREMENT
369 S-369 INTRA OCULAR LENS POSTERIOR CHAMBER
(FOLDABLE)
13mm DIAMETER/6.5 mm
OPTICS
HYDROPHILLIC ACRYLIC WITH INJECTOR UNIT WITH POWER 15D TO 28 D WITH
0.5D INCREMENT
370 S-370 INTRA OCULAR LENS POSTERIOR CHAMBER
(FOLDABLE)
13.5mm DIAMETER /6.5 mm OPTICS
HYDROPHILLIC ACRYLIC WITH INJECTOR UNIT WITH POWER 15D TO 28 D WITH
0.5D INCREMENT
371 S-371 INTRA OCULAR LENS ANTERIOR CHAMBER
12.5MM DIAMETER/5.5 mm
OPTICS
POLYHYDROXYETHYLMETHACRYLATE WITH MODIFIED C LOOP POWER 15 D TO
28 D WITH 0.5D INCREMENT
372 S-372 INTRA OCULAR LENS ANTERIOR CHAMBER
13MM DIAMETER/5.5 mm
OPTICS
POLYHYDROXYETHYLMETHACRYLATE WITH MODIFIED C LOOP POWER 15 D TO
28 D WITH 0.5D INCREMENT
373 S-373 INTRA OCULAR LENS ANTERIOR CHAMBER
13.5MM DIAMETER/5.5 mm
OPTICS
POLYHYDROXYETHYLMETHACRYLATE WITH MODIFIED C LOOP POWER 15 D TO
28 D WITH 0.5D INCREMENT
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
203 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
374 S-374 INTRA OCULAR LENS ANTERIOR CHAMBER
12.5MM DIAMETER/6 mm
OPTICS
POLYHYDROXYETHYLMETHACRYLATE WITH MODIFIED C LOOP POWER 15 D TO
28 D WITH 0.5D INCREMENT
375 S-375 INTRA OCULAR LENS ANTERIOR CHAMBER
13MM DIAMETER/6 mm OPTICS
POLYHYDROXYETHYLMETHACRYLATE
WITH MODIFIED C LOOP POWER 15 D TO 28 D WITH 0.5D INCREMENT
376 S-376 INTRA OCULAR LENS ANTERIOR CHAMBER
13.5MM DIAMETER/6 mm
OPTICS
POLYHYDROXYETHYLMETHACRYLATE WITH MODIFIED C LOOP POWER 15 D TO
28 D WITH 0.5D INCREMENT
377 S-377 INTRA OCULAR LENS ANTERIOR CHAMBER
12.5MM DIAMETER /6.5 mm OPTICS
POLYHYDROXYETHYLMETHACRYLATEWITH MODIFIED C LOOP POWER 15 D TO 28 D
WITH 0.5D INCREMENT
378 S-378 INTRA OCULAR LENS ANTERIOR CHAMBER
13MM DIAMETER/6.5 mm
OPTICS
POLYHYDROXYETHYLMETHACRYLATE WITH MODIFIED C LOOP POWER 15 D TO
28 D WITH 0.5D INCREMENT
379 S-379 INTRA OCULAR LENS ANTERIOR CHAMBER
13.5MM DIAMETER /6.5 mm OPTICS
POLYHYDROXYETHYLMETHACRYLATE WITH MODIFIED C LOOP POWER 15 D TO
28 D WITH 0.5D INCREMENT
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
204 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
380 S-380 Blood collection Bag :
1. 350 ml blood bag with 49 ml
PRA/CPDA-ICPDA-2 anti coagulant solution with
standard donor tubing .
1. 350 ml blood bag with 49 ml PRA/CPDA-ICPDA-2 anti coagulant solution
with standard donor tubing.2. It
should have non peel off label3. It should have stumper evident as integrated part.4. 16 G needle with ultra thin wall breakaway needle cover with bevel protector.5. Independent sterility
testing report from Govt. recognized laboratory for every batch .6. Tube
length should be about 100 cms with minimum 10 pilots marking on
tube.7. Tube with easily knot ability and sealing with die electric
sealer.8. Anti coagulant solutions should be as per IP/USP/BP
specifications.9. Solution should be sterile, HIV, Hepatitis B & C and Pyrogen
free.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
205 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
381 S-381 Blood collection Bag : (i) 100 ml blood
collection bag also as per specification.
1. 100 ml blood bag with 14 ml PRA/CPDA-ICPDA-2 anti coagulant solution
with standard donor tubing.2. It
should have non peel off label3. It should have stumper evident as integrated part.4. 16 G needle with ultra thin wall breakaway needle cover with bevel protector.5. Independent sterility
testing report from Govt. recognized laboratory for every batch .6. Tube
length should be about 100 cms with minimum 10 pilots marking on
tube.7. Tube with easily knot ability and sealing with die electric
sealer.8. Anti coagulant solutions should be as per IP/USP/BP
specifications.9. Solution should be sterile, HIV, Hepatitis B & C and Pyrogen
free.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
206 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
382 S-382 Blood collection Bag : (ii) Double bag
1. 350 ml blood bag with 49 ml PRA/CPDA-ICPDA-2 anti coagulant solution
with standard donor tubing.With one
satellite bag of 300ml 2. It should have non peel off label3. It should
have stumper evident as integrated part.4. 16 G needle with ultra thin wall breakaway needle cover with bevel protector.5. Independent sterility
testing report from Govt. recognized laboratory for every batch .6. Tube
length should be about 100 cms with minimum 10 pilots marking on
tube.7. Tube with easily knot ability and sealing with die electric
sealer.8. Anti coagulant solutions should be as per IP/USP/BP
specifications.9. Solution should be sterile, HIV, Hepatitis B & C and Pyrogen
free.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
207 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
383 S-383 Blood collection Bag : (iii) Triple bag
1. 350 ml blood bag with 49 ml PRA/CPDA-ICPDA-2 anti coagulant solution
with standard donor tubing.With two
satellite bags of 300ml 2. It should have non peel off label3. It should
have stumper evident as integrated part.4. 16 G needle with ultra thin wall breakaway needle cover with bevel protector.5. Independent sterility
testing report from Govt. recognized laboratory for every batch .6. Tube
length should be about 100 cms with minimum 10 pilots marking on
tube.7. Tube with easily knot ability and sealing with die electric
sealer.8. Anti coagulant solutions should be as per IP/USP/BP
specifications.9. Solution should be sterile, HIV, Hepatitis B & C and Pyrogen
free.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
208 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
384 S-384 Blood collection Bag : Quadruple bag
1. 350 ml blood bag with 49 ml PRA/CPDA-ICPDA-2 anti coagulant solution
with standard donor tubing.With three
satellite bags of 300ml 2. It should have non peel off label3. It should
have stumper evident as integrated part.4. 16 G needle with ultra thin wall breakaway needle cover with bevel protector.5. Independent sterility
testing report from Govt. recognized laboratory for every batch .6. Tube
length should be about 100 cms with minimum 10 pilots marking on
tube.7. Tube with easily knot ability and sealing with die electric
sealer.8. Anti coagulant solutions should be as per IP/USP/BP
specifications.9. Solution should be sterile, HIV, Hepatitis B & C and Pyrogen
free.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
209 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
385 S-385 Blood collection Bag : Penta bag
1. 350 ml blood bag with 49 ml PRA/CPDA-ICPDA-2 anti coagulant solution
with standard donor tubing,. With four
satellite bags of 300ml .2. It should have non peel off label3. It should
have stumper evident as integrated part.4. 16 G needle with ultra thin wall breakaway needle cover with bevel protector.5. Independent sterility
testing report from Govt. recognized laboratory for every batch .6. Tube
length should be about 100 cms with minimum 10 pilots marking on
tube.7. Tube with easily knot ability and sealing with die electric
sealer.8. Anti coagulant solutions should be as per IP/USP/BP
specifications.9. Solution should be sterile, HIV, Hepatitis B & C and Pyrogen
free.
386 S-386 A) Blood grouping sera : Anti
A,Anti B,Anti D 5 ml Pack
1. Should be monoclonal agglutinating sera2. Should be HIV and pygogen free3.
Anti A,Anti B,Acceptable 1:256Anti D Acceptable – 1:32
387 S-387 B) Blood grouping sera : Anti
A,Anti B,Anti D 10 ml Pack
1. Should be monoclonal agglutinating sera2. Should be HIV and pygogen free3.
Anti A,Anti B,Acceptable 1:256Anti D Acceptable – 1:32
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
210 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
388 S-388 C) HCV Elisa Test Kit: a) Should have CORE E1/E2 C-200 (NSB, NS 4a & 4 b) and NS-5b) Sensitivity-98%,
specificity -95%
389 S-389 G) HCV Rapid Test Kit
1- Time upto 30 minutes provisions shall be made for conducting single test at a time.2- Sensitivity-99.5%, specificity-
98%
390 S-390 D) HIV Elisa Test Kit a) Should have CORE E1/E2 C-200 (NSB, NS 4a & 4 b) and NS-5b) Sensitivity-98%,
specificity -95%
391 S-391 F) HIV Rapid Test Kit :
1- Time upto 30 minutes provisions shall be made for conducting single test at a time.2- Sensitivity-99.5%, specificity-
98%
392 S-392 E) HBs Ag Elisa Test Kit a) Should have CORE E1/E2 C-200 (NSB, NS 4a & 4 b) and NS-5b) Sensitivity-98%,
specificity -95%
393 S-393 H ) HBs Ag Rapid Test Kit
1- Time upto 30 minutes provisions shall be made for conducting single test at a time.2- Sensitivity-99.5%, specificity-
98%
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
211 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
394 S-394 BLOOD TRANSFUSION SET
Conforming to following specifications: 1.
The set should be made of special medical grade non toxic P.V.C. flexible transparent material with a separate air-vent and drop
chamber with a clot filter gauze 2. It should be sterilised in a polythene pack of 300
gauge thickness by Gamma, E.T.O. irradiation to a minimum dose of 2.5 mrad
or 2.5 kg gray. 3. The pack should be sealed at the both end one cm away from each end. The sealing thickness should be
2.5 to 3 mm4. The length of tube should be
30 cm5. The adopter ((Mouth) should be made of flexible P.V.C. and leak proof at the joint of the tubing & transparent &
flexible 6. The quality of tubing should be flexible non toxic medical grade. The I.V.
needle of scalp-vein should be sharp bevel, it should be mounded in a fashion to
provide easy holding while vein puncture, all the joints in the set should be leak-
proof. 7. The needle should be provided with a flexible cap to protect the bevel of
needle8. The adopter should be provided with well fitting closing device
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
212 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
395 S-395 Pre-injection Swabs Impregnated with 70% IsoPropyl Alchohol
and 2% CHLORHEXIDINE GLUCONATE
396 S-396 Pre-injection Swabs Impregnated with 70% IsoPropyl Alchohol
397 S-397 Elastic Crepe Bandage 7.5cmx4/6mt Stretched length 6mtr
398 S-398 Elastic Crepe Bandage 10cmx4/6mt Stretched length 6mtr
399 S-399 Elastic Crepe Bandage 15cmx4/6mt Stretched length 6mtr
400 S-400 Hydrofibre silver(1%ionic)
Dressing with carboxy methyl cellulose
5cmx5cm Box of 5
401 S-401 Hydrofibre silver(1%ionic)
Dressing with carboxy methyl cellulose
10cmx10cm Box of 5
402 S-402 Hydrofibre silver(1%ionic)
Dressing with carboxy methyl
cellulose
15cmx15cm Box of 5
403 S-403 Hydrofibre silver(1%ionic)
Dressing with carboxy methyl cellulose
20cmx30cm Box of 5
404 S-404 Hydrofibre silver(1%ionic)
Dressing with carboxy methyl cellulose
5cmx20cm Box of 5
405 S-405 Adhessive Skin closure 6x100mm Sterile Adhesive strips of porous, non- woven rayon backing, reinforced with polyester filaments for skin closure.
406 S-406 Adhessive Skin closure 12x100mm Sterile Adhesive strips of porous, non- woven rayon backing, reinforced with polyester filaments for skin closure.
407 S-407 Adhessive Skin closure 3x75mm Sterile Adhesive strips of porous, non- woven rayon backing, reinforced with polyester filaments for skin closure.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
213 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
408 S-408 Syphilis Rapid Test Card Rapid Plasma Reagin 18mm circle Cards
409 S-409 Syphilis Test Strip
410 S-410 Dengue NS -1 Ag +IgG Ab
Test Card
411 S-411 Dengue NS -1 Ag +IgM Ab
Test Card
412 S-412 Salmonella Typhi IgG Test
413 S-413 Salmonella Typhi IgM Test
414 S-414 Malaria Ag Pf/Pv
416 S-416 JEV IgM Rapid Test Card
417 S-417 Troponin I Rapid Test
418 S-418 Troponin T Rapid Test
419 S-419 Urine Analysis Strips pack of 50
420 S-420 Hemoglobin Rapid Test Kit
(One Time & Recording Replishment Cost)
421 S-421 Urine Testing Strips (for
Albumin & Sugar) pack of100
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
214 | P a g e
7. PRICE SCHEDULE: FOR LIST OF GENERAL ITEMS
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
1 G-1 Methylene Blue Solution 100 ml
2 G-2 Chlorhexidine Gluconate Solution Liquid 4% w/v 1 Litre
3 G-3 (a) Chlorhexidine Gluconate Solution +(b) Strong Cetrimide Solution Eq.to
Cetrimide Liquid
0.3% v/v + 0.6% w/v
1000 ml
4 G-4
Glutaraldehyde Solution (With Activator Vial)Mint Smell And Rust Inhibitor (Without Surfactant) (Use
Life 14 Days After Activation)
Liquid 2.4% w/v 5 Litre
5 G-5 Benzyl -C12-18 Alkyl Dimethyl
Ammonium chloides Dodecylbispropylene Triamine
Eacg 100ml Contains:
19.9g 5g
Aldehyde free cleaning
dsinfectant
6 G-6
1,6 Dihydroxy, 2-5 Dioxahexane
Glutaraldehyde Benzalkonium Chloride IP
Alkyl Urea Derivative
Liquid
Eacg 100ml Contains:
11.2g 5.0g 5.0g 3.0g
Surface and environmental
dsinfectant
7 G-7 Skin Prep Solution LIQUID 500ml
ISOPROPYL ALCOHAL 70 %
WITH 2% CHLORHEXIDINE
GLUCONATE
8 G-8 Skin Prep Solution LIQUID 1ltr
ISOPROPYL
ALCOHAL 70 % WITH 2%
CHLORHEXIDINE GLUCONATE
9 G-9 Bleaching Powder ISI MARK 25 kg Bag
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
215 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
10 G-10
8-Potassium Peroxymonosulphate (Triple Salt): 40%-50%, Sulphamidic Acid:1%-10%, Sodium Alkylbenzene Sulphonate: 10%-20% (EPA USA)
10 minute Aldehye free disinfectant
500 gm. Jar
11 G-11
9 - 10 Minute Sporicidal Sterliant Aldehyde Free (CE Approved) Powder
form Sodium Perborate Salt: 40%-60%
162 gm. Jar
12 G-12 Diamond marker Pencil
6" holder with artificial diamond (hard stone)
embedded at one end with screw cap to mark on
microscope glass slides
6 nos.
13 G-13 Grease marking pencil
Marking pencil MPS, Blue or red coloured, 8" length, to write on glass ware/metal
surfaces
8 nos.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
216 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
14 G-14 Filter Paper
Filter paper No. 1,12.5 cms diameter for filtering carbol fuchsin using a small funnel
of 10cm maximum diameter, Smooth on one
side and rough on the other side, water permeable
120 packs
15 G-15 Lens paper
Soft microscope lens cleaning tissue, 4" x 6" booklet, each booklet containing 100 sheets
50 booklets
16 G-16 slides Glass microscope slides, 76mm x 26mm x 1.3mm,
plain, one pack of 50 slides. 144 packs
17 G-17 Test tubes Glass
autoclavable & heat resistant, standard rimless,
150 x 16mm with screw caps.
100
18 G-18 Loop Wire
Nichrome wire, 24 Standard Wire Gauge (SWG) or 0.022
inches or 0.559 mm thickness SWG
10 metres
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
217 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
19 G-19 Glass beads
Acid washed, 3mm diameter, round,
transparent, for dispersing the clumps of micro-
organisms by
500 gms.
20 G-20 Bijou bottles
Borosilicate or corning glass of 5 ml capacity with screw
caps of Aluminium with rubber liners suitable for Bijou bottles, leak proof
250
21 G-21 Spare Caps for Bijou bottles Screw caps of Aluminium with rubber liners suitable
for Bijou bottles 50
22 G-22 Sulphuric acid H2SO4, molecular wt.
98.08, Minimum Assay: 98%, colour: clear
500 ml
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
218 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
23 G-23 Basic Fuchsin
Chemical name :Pararosaniline
hydrochloride, chemical
structure: C20H20ClN3 mol wt:337.86'Dye content: Approx.85%-88%(dye
content must be mentioned), Colour: Metallic
green.
25gm
24 G-24 Carbolic acid( phenol)
Chemical name: Phenol, Chemical structure: C6H5OH, Molecular
wt:94.11, Melting point:40 °C + 2, Purity:99.5%
500 gm
25 G-25 Methylene blue
Chemical Name: Methylthionine chloride,
Chemical Structure: C16H18ClN3S, molecular Wt: 319.9, Dye content: approx.82% (should be
available on the container)
25 gm
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
219 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
26 G-26 Potassium Di chromate
Chemicals Formula:K2Cr207, Formula
Wt: 294.2, Minimum assay:99.5%
1 Kg
27 G-27 Malachite Green
Chemicals name:Malachite green Hydro Chloride,
Chemical structure:C23H25CIN2,
Molecular
150 gms
Wt.=364.9,
Colour: Green, Dye content:
80%+9% Solubility: both
in water & alcohol, Stability
:
28 G-28 Auramine C17H22ClN3, mol wt:
303.84 250 gms
29 G-29 Phenol
Chemical name: Phenol, Chemical structure:
C6H5OH, Molecular Wt: 94.11, Melting point:
40°C+2, purity: 99.5%
500gm
30 G-30 Hydrochloric Acid Concentrated Hydro Chloric Acid, Molecular Wt: 36.46
Specific Gravity 1.18 15 Ltrs
31 G-31 Potassium Permanganate KMnO4, Formula Wt:158 500 gms
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
220 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
32 G-32 Paraffin Liquid(Heavy Grade)
Refractive index of 1.48. It should be colourless,
odurless, transparent, free
from fluorescene in day light with relative density of 0.827 to 0.890, viscosity of 110 to 230 m Pa s., specific
gravity of 0.76-0.78 at 15.5°C
500 ml
33 G-33 N-acetyl L-Cysteine Chemical
structure:C5H9NO3S, mol wt: 163.2
25 gms
34 G-34 Sodium Citrate
Chemical name: Trisodium citrate dihydrate, AR
gradeChemical structure:Na3C6H5O7.2H,O, Molecular Wt (FW):294.10,
Purity: 99%
500 gms
35 G-35 Potassium phosphate
Potassium Di Hydrogen
ortho Phosphate KH2PO4, Molecular
Wt:=136.1Minimum assay=99%
1 Kg.
36 G-36 Magnesium Sulphate MgSO4.7H2O; mol wt 246.48; purity:99.5%
1Kg
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
221 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
37 G-37 Magnesium Citrate TriBasic C12H10Mg3O14.9H2O mol
wt: 613.28 500 gms
38 G-38 L- asparagine monohydrate L-Asparagine monohydrate ; C4H8N23.H2O mol wt:
150.14
1 Kg
39 G-39 Glycerol CH2OHCHOHCH2OH mol wt: 92.1; purity 99.5%
3 Ltrs
40 G-40 Sodium hydroxide pellets NaOH Formula Wt:40 Minimum Assay :98%
1 Kg
41 G-41 Cetyl Pyridinium chloride Cetyl Pyridinium Chloride;
Chemical structure: C21H38ClN.H2O / 358
500 gms
42 G-42 Sodium Chloride
Chemical name: sodium chloride chemical structure
:NaC1 Molecular Weight:58.44 Minimum
assay:99.9%
1 Kg
43 G-43 Dihydrostreptomycin sesquisulphate sigma D-
7253 5 gms
44 G-44 Isonicotinic acid hydarazide Sigma I -3377 5 gms
45 G-45 Rifampicin Sigma R-3501 5 gms
46 G-46 Ethambutol dihydrochloride Sigma E-4630 25 gms pack
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
222 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
47 G-47 PARA NITRO BENZOIC ACID Chemical NameFormula Wt:
167.12, Min assay =99% C6H4COOHNO2
100 gms pack
48 G-48 Cyanogen bromide CNBr- Cisco Research
Lab:mol wt:105.9 100 gms pack
49 G-49 O-Tolidine A.R Dimethyl benzidine C14H16N2 form wt: 212.3 50 gms powder pack
50 G-50 Hydrogen peroxide AR or GR grade, assay : 29-
32% solution, FW-34.01 1.5 Ltr
51 G-51 Polyoxyethylenesorbitanmoonooleate.
(Tween-80 ) AR or GR Grade,
Density=1.06-1.09g/ml 500 ml
52 G-52 Oxalic acid(pure) COOHCOOH.2H2; mol
wt:126.07 ; purity 99.8% 500 gms
53 G-53 Absolute alcohol Ethanol 1 Ltrs
54 G-54 Liquor ammonia LR/GR Grade 1 Ltr
55 G-55 Sodium carbonate Formula Na2CO3 Formula Wt: 106 Minimum asay
:99% 500 gms
56 G-56 N-N-dimethyl formamide HCON(CH3)2 mol wt: 73.09 500 ml
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
223 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
57 G-57 Formaldehyde
HCHO; mol wt: 30.03; wt per ml at 20oC=1.075-
1.095 g; methanol content=10-15%, Assay
(acidimetric) as HCHO 37-41%
2.5 Ltrs
58 G-58
9 - 10 Minute Sporicidal Sterliant Aldehyde Free (CertificateEuropia Approved) Powder form Sodium
Perborate Salt: 40%-60%
810 gm Jar
59 G-59 Disinfectant Fluid Class - Grade - I,
White 5 Litre pack
(RWC-18) Type Normal,
BIS Mark IS-1061
60 G-60 Disinfectant Fluid Class - Grade - II
White 5 Litre pack
(RWC-10), Type Normal,
BIS Mark IS-1061
61 G-61 Disinfectant Fluid Class - Grade -III
White 5 Litre pack
(RWC-5)Type
Normal,
BIS Mark IS-
1061
62 G-62 Disinfectant Fluid Class - Grade -
I,Black 5 Litre pack
(RWC-18) Type Normal,
BIS Mark IS-1061
63 G-63 Disinfectant Fluid Class - Grade - II
Black 5 Litre pack
(RWC-10),, Type Normal,
BIS Mark IS-1061
64 G-64 Disinfectant Fluid Class - Grade -III
Black 5 Litre pack
(RWC-5)Type Normal,
BIS Mark IS-1061
65 G-65 Disinfectant Fluid Class - Grade - I,
White 20 Litre pack
(RWC-18), Type Normal,
BIS Mark IS-1061
66 G-66 Disinfectant Fluid Class - Grade - II
White 20 Litre pack
(RWC-10), Type Normal,
BIS Mark IS-1061
67 G-67 Disinfectant Fluid Class - Grade -III
White 20 Litre pack
(RWC-5), Type Normal,
BIS Mark IS-1061
68 G-68 Disinfectant Fluid Class - Grade -
I,Black 20 Litre pack
(RWC-18) Type Normal,
BIS Mark IS-1061
69 G-69 Disinfectant Fluid Class - Grade - II
Black 20 Litre pack
(RWC-10),, Type Normal,
BIS Mark IS-1061
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
224 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
70 G-70 Disinfectant Fluid Class - Grade -III
Black 20 Litre pack
(RWC-5), Type Normal,
BIS Mark IS-1061
71 G-71 Malathion TC LIQUID 0.95 250KG conforming to BIS
no1832-1978
72 G-72 Pyrethrum X. LIQUID 0.02 25 LITRE C21H28O3conforming toBIS no 1051-1980
73 G-73 Temephos. EMULSIFIABLE CONCENTRATE
0.5 5 Litre conforming to BIS
no8498- 1977
74 G-74 Bacillus Thuringiensis Israelensis AQUOUS SOLUTION 100kg As per
NVBDCPSpecifications
75 G-75 Bacillus Thuringiensis Israelensis WETTEBLE POWDER 100kg As per
NVBDCPSpecifications
76 G-76 CYPHENOTHRIN EMULSIFIABLE CONCENTRATE
0.05 5L As per
NVBDCPSpecifications
77 G-77 DIFLUBENZURON WETTEBLE POWDER 0.25 500g As per
NVBDCPSpecifications
78 G-78 PYRIPROXYFEN GRANULES 0.005 20kg As per
NVBDCPSpecifications
79 G-79 Deltamethrin WETTEBLE POWDER 0.025
80 G-80 Varible Concentration Mask
. Suitable for oxygen therapy. Swivel
connector for patient comfort
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
225 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
81 G-81 Aerosol Therapy NEBULIZING KIT
Complete kit consists of :
Nebulizer Mask, Nebulizer Chamber and 210 cm Star
Lumen Tube.
STERILIZED PKD SINGLE PIECE
PACK
. Specially designed nebulizer chamber
with nebulization rate
of appoximately 3 cc in 10 minutes..
Average praticle size generation is
approximately 2 microns
82 G-82 HUB Cutter STERILIZED PKD SINGLE PIECE
PACK
83 G-83 Cord clamp STERILIZED PKD SINGLE PIECE
PACK
84 G-84 cord clamp with cutting facility STERILIZED PKD SINGLE PIECE
PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
226 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
85 G-85 Xray plate 10x12 Inches PACKETS OF 100
Blue Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut with 50 GSM interleaving photo graphically inert
paper Yellow / white
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
227 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
86 G-86 Xray plate 12x12 Inches PACKETS OF 100
Blue Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut with 50 GSM interleaving photo graphically inert
paper Yellow / white
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
228 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
87 G-87 Xray plate 12x15 Inches PACKETS OF 100
Blue Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut with 50 GSM interleaving photo graphically inert
paper Yellow / white
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
229 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
88 G-88 Xray plate 14x17 Inches PACKETS OF 100
Blue Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut with 50 GSM interleaving photo graphically inert
paper Yellow / white
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
230 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
89 G-89 Xray plate 8x10 Inches PACKETS OF 100
Blue Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut with 50 GSM interleaving photo graphically inert
paper Yellow / white
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
231 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
90 G-90 Xray plate 6x8 Inches PACKETS OF 100
Blue Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut with 50 GSM interleaving photo graphically inert
paper Yellow / white
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
232 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
91 G-91 Xray plate dental plates PACKETS OF 100
Blue Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut covered in plastic pack
92 G-92 Xray plate CT Scan Films 14x17 PACKETS OF 125
Blue Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
233 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
93 G-93 Xray plate 10x12 Inches PACKETS OF 100
Green Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut with 50 GSM interleaving photo graphically inert
paper Yellow / white
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
234 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
94 G-94 Xray plate 12x12 Inches PACKETS OF 100
Green Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut with 50 GSM interleaving photo graphically inert
paper Yellow / white
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
235 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
95 G-95 Xray plate 12x15 Inches PACKETS OF 100
Green Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut with 50 GSM interleaving photo graphically inert
paper Yellow / white
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
236 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
96 G-96 Xray plate 14x17 Inches PACKETS OF 100
Green Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut with 50 GSM interleaving photo graphically inert
paper Yellow / white
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
237 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
97 G-97 Xray plate 8x10 Inches PACKETS OF 100
Green Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut with 50 GSM interleaving photo graphically inert
paper Yellow / white
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
238 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
98 G-98 Xray plate 6x8 Inches PACKETS OF 100
Green Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut with 50 GSM interleaving photo graphically inert
paper Yellow / white
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
239 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
99 G-99 Xray plate dental plates PACKETS OF 100
Green Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut covered in plastic pack
100 G-100 Xray plate CT Scan Films 14x17 PACKETS OF 125
Green Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
240 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
101 G-101 Xray plate Digital Camera
Films8x10 PACKETS OF 150
Blue Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut
102 G-102 Xray plate Digital Camera
Films10x12 PACKETS OF 150
Blue Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
241 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
103 G-103 Xray plate Digital Camera
Films12x15 PACKETS OF 150
Blue Double sided emulsion coated film
of polyethylene terephthalate(PET)
resin base 185 +/-20 microns thickness
density0 .10+/-0.01 as per BIS
specification no.IS 9644 corners round
cut
104 G-104 Rota haler device
105 G-105 SWINE FLU VIRAL TRANSPORT MEDIUM (HI VIRAL SWAB WITH
3%HI TRANSPORT MEDIUM
15x120mm polypropylene
centrifuge tube, 2ml fill of transport media, nylon
flocked NP swab on a thin flexible plastic shaft that is scored
for breaking, includes a zip lock bag,
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
242 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
106 G-106 N-95 MASK STERILIZED PKD SINGLE PIECE
PACK
N-95 Face Respirator
Mask: Filter efficiency of 95 % or more
against particulate aerosols. The mask should be provided
with expiration valve. It should be
disposable & to be able to fit for wide
range of face sizes. It should accompany
with certification from
NIOSH or any other internationally
accepted certification.
107 G-107 TRIPPLE LAYER MASK STERILIZED PKD SINGLE PIECE
PACK
Tie on Mask of Non-woven,
Hypoallergenic 3 ply construction with filter in between
offering >99 percent standard with 4 tie
strings.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
243 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
108 G-108 PP KIT LOW WITH SEPARATE HOOD STERILIZED PKD SINGLE PIECE
PACK
Pandemic Flu Kit, LOW GOWN WITH
SEPARATE HOOD Including
Gloves, Mask, shoe cover
4 Oz. Sanitizing Lotion, Sanitizing
Wipes, Tissues And Plastic
Resealable Bag.
109 G-109 FACE MASK box of 100 sterlized single
pack Tie band with nasal
clip
110 G-110 SHOE COVER All sizes single pair sterile
pack
Perfect Fitting Smooth Texture Wear and tear
resistant dust proof and waterproof
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
244 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
111 G-111 STERILE SURGICAL GLOVES
POWDER FREE FG6
STERILIZED PKD SINGLE PAIR
PACK
a pair of 100% natural latex gloves natural/beige color with1. high strength and elasticity,fully
anatomical design to reduce hand fatigue textured surfacefor
excellent wet and dry grip easy to wear and
can prevent rolling back,softnss
providing superior comfort and natural fitness,2. elongaton
at break 550%-750% with tensile strength 14MPa-27MPa and
freedom from holes:AQL 1.5,3.
sterilized by Gamma ray or Ethylene Oxide
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
245 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
112 G-112 STERILE SURGICAL GLOVES
POWDER FREE FG6.5
STERILIZED PKD SINGLE PAIR
PACK
a pair of 100% natural latex gloves natural/beige color with1. high strength and elasticity,fully
anatomical design to reduce hand fatigue textured surfacefor
excellent wet and dry grip easy to wear and
can prevent rolling back,softnss
providing superior comfort and natural fitness,2. elongaton
at break 550%-750% with tensile strength 14MPa-27MPa and
freedom from holes:AQL 1.5,3.
sterilized by Gamma ray or Ethylene Oxide
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
246 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
113 G-113 STERILE SURGICAL GLOVES
POWDER FREE FG7
STERILIZED PKD SINGLE PAIR
PACK
a pair of 100% natural latex gloves natural/beige color with1. high strength and elasticity,fully
anatomical design to reduce hand fatigue textured surfacefor
excellent wet and dry grip easy to wear and
can prevent rolling back,softnss
providing superior comfort and natural fitness,2. elongaton
at break 550%-750% with tensile strength 14MPa-27MPa and
freedom from holes:AQL 1.5,3.
sterilized by Gamma ray or Ethylene Oxide
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
247 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
114 G-114 STERILE SURGICAL GLOVES
POWDER FREE FG 7.5
STERILIZED PKD SINGLE PAIR
PACK
a pair of 100% natural latex gloves natural/beige color with1. high strength and elasticity,fully
anatomical design to reduce hand fatigue textured surfacefor
excellent wet and dry grip easy to wear and
can prevent rolling back,softnss
providing superior comfort and natural fitness,2. elongaton
at break 550%-750% with tensile strength 14MPa-27MPa and
freedom from holes:AQL 1.5,3.
sterilized by Gamma ray or Ethylene Oxide
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
248 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
115 G-115 STERILE SURGICAL GLOVES
POWDER FREE FG8
STERILIZED PKD SINGLE PAIR
PACK
a pair of 100% natural latex gloves natural/beige color with1. high strength and elasticity,fully
anatomical design to reduce hand fatigue textured surfacefor
excellent wet and dry grip easy to wear and
can prevent rolling back,softnss
providing superior comfort and natural fitness,2. elongaton
at break 550%-750% with tensile strength 14MPa-27MPa and
freedom from holes:AQL 1.5,3.
sterilized by Gamma ray or Ethylene Oxide
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
249 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
116 G-116 STERILE SURGICAL GLOVES
POWDER FREE FG8.5
STERILIZED PKD SINGLE PAIR
PACK
a pair of 100% natural latex gloves natural/beige color with1. high strength and elasticity,fully
anatomical design to reduce hand fatigue textured surfacefor
excellent wet and dry grip easy to wear and
can prevent rolling back,softnss
providing superior comfort and natural fitness,2. elongaton
at break 550%-750% with tensile strength 14MPa-27MPa and
freedom from holes:AQL 1.5,3.
sterilized by Gamma ray or Ethylene Oxide
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
250 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
117 G-117 INSULIN NANO PEN UNIT As per latest BIS
specifications
118 G-118 SURGICAL BLADE SS/CS No.11 STERILIZED PKD SINGLE PIECE
PACK
119 G-119 SURGICAL BLADE SS/CS No.12 STERILIZED PKD SINGLE PIECE
PACK
120 G-120 SURGICAL BLADE SS/CS No.15 STERILIZED PKD SINGLE PIECE
PACK
121 G-121 SURGICAL BLADE SS/CS No.21 STERILIZED PKD SINGLE PIECE
PACK
122 G-122 SURGICAL BLADE SS/CS No.22 STERILIZED PKD SINGLE PIECE
PACK
123 G-123 SURGICAL BLADE SS/CS No.23 STERILIZED PKD SINGLE PIECE
PACK
124 G-124 DISPOSABLE SURGICAL MASK box of 100 STERILIZED PKD SINGLE PIECE
PACK
Elasti Strip with nasal clip
125 G-125 DISPOSABLE SURGICAL CAP box of 100 STERILIZED PKD SINGLE PIECE
PACK Back Elastic Strip
126 G-126 MACINTOSH SHEET ROLL 100CM x 20M BIS Mark
127 G-127 ECG ROLL ROLL 50 cm x 20 Mtr
128 G-128 ECG ROLL ROLL 50 cm x 30 Mtr
129 G-129 USG ROLL ROLL 2-1/16"X250 ft
130 G-130 USG GEL TUBE 250ml
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
251 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
131 G-131 ECG GEL TUBE 250ml
132 G-132 STOCKINETTE ROLL 5cmX10Mt
133 G-133 STOCKINETTE ROLL 7.5cmX10Mt
134 G-134 STOCKINETTE ROLL 10cmX10Mt
135 G-135 STOCKINETTE ROLL 15cmX10mm
136 G-136 CAST PADDING ROLL 10cmX2.7mt
137 G-137 CAST PADDING ROLL 15cmx2.7mt
138 G-138 STEAM AUTOCLAVE LEAD FREE TAPE ROLL 3/4''X55mt
139 G-139 STEAM AUTOCLAVE LEAD FREE TAPE ROLL 1/2''X30mt
140 G-140 HCG Pregnancy Test Device single sterile
pack
141 G-141 Sputum container
Cups made of Special Medical
Grade Polypropylene,
thin plastic, translucent, Diameter -
4cm,Capacity - 30 ml, Srewable Cap should also
be made of Special Medical
Grade Polypropylene and should be air tight. Leak
proof.
300 nos.
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
252 | P a g e
S No.
Code Name Strength Quantity Presentation Specification Testing Charge
(A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
142 G-142 Absobent Cotton Wool IP 500 gm. PACKET ROLL in sealed
polypack
LAYERED COTTON PACK .
143 G-143 Steam Chemical Indicator
Moving front Chemical
integration, indicating Accept
or Reject, to verify all
parameters of steam
sterilization together i.e.
time, Temperature and Quality of steam. Can be
used for pack control
monitoring of all 118-138 °C
(245-280 °F) steam
Sterilization cycles
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
253 | P a g e
8. PRICE SCHEDULE: FOR LIST OF ORTHOPEDIC IMPLANTS
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
HUMERUS PLATE:-with hole size
1 OI 1 a Narrow Dynamic Compression plate
4.5mm 5 holes SINGLE PIECE PACK
2 OI 1 b Narrow Dynamic Compression plate
4.5mm 6 holes SINGLE PIECE PACK
3 OI 1 c Narrow Dynamic Compression plate
4.5mm 7 holes SINGLE PIECE PACK
4 OI 1 d4.5
Narrow Dynamic Compression plate 4.5mm
8 holes SINGLE PIECE PACK
5 OI 1 e4.5
Narrow Dynamic Compression plate 4.5mm
9 holes SINGLE PIECE PACK
6 OI 1 f4.5 Narrow Dynamic Compression plate
4.5mm 10 holes SINGLE PIECE PACK
7 OI 1
g4.5
Narrow Dynamic Compression plate
4.5mm 11 holes SINGLE PIECE PACK
8 OI 1 h4.5
Narrow Dynamic Compression plate 4.5mm
12 holes SINGLE PIECE PACK
17 OI 2 a Proximal humerus plate 3.5mm 3 holes SINGLE PIECE PACK
18 OI 2 b Proximal humerus plate 3.5mm 4 holes SINGLE PIECE PACK
19 OI 2c Proximal humerus plate 3.5mm 5 holes SINGLE PIECE PACK
20 OI 2 d Proximal humerus plate 3.5mm 6 holes SINGLE PIECE PACK
21 OI 2e Proximal humerus plate 3.5mm 7 holes SINGLE PIECE PACK
22 OI 2f Proximal humerus plate 3.5mm 8 holes SINGLE PIECE PACK
23 OI 3 a3.5L
Distal Medial Humerus plate 3.5mm left
3 holes SINGLE PIECE PACK
25 OI 3 c3.5L
Distal Medial Humerus plate 3.5mm left
5 holes SINGLE PIECE PACK
27 OI 3 e3.5L
Distal Medial Humerus plate 3.5mm left
7 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
254 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
29 OI 3 g3.5L
Distal Medial Humerus plate 3.5mm left
9 holes SINGLE PIECE PACK
35 OI 3 a3.5R
Distal Medial Humerus plate 3.5mm right
3 holes SINGLE PIECE PACK
37 OI 3 c3.5R
Distal Medial Humerus plate 3.5mm right
5 holes SINGLE PIECE PACK
39 OI
3e3.5R Distal Medial Humerus plate 3.5mm
right 7 holes SINGLE PIECE PACK
41 OI 3
g3.5R Distal Medial Humerus plate 3.5mm
right 9 holes SINGLE PIECE PACK
95 OI 4 a3.5L
Dorso lateral Humerus plate 3.5mm left
3 holes SINGLE PIECE PACK
97 OI 4 c3.5L
Dorso lateral Humerus plate 3.5mm left
5 holes SINGLE PIECE PACK
99 OI 4 e3.5L
Dorso lateral Humerus plate 3.5mm left
7 holes SINGLE PIECE PACK
101 OI 4
g3.5L
Dorso lateral Humerus plate 3.5mm
left 9 holes SINGLE PIECE PACK
107 OI 4 a3.5R
Dorso lateral Humerus plate 3.5mm right
3 holes SINGLE PIECE PACK
109 OI 4 c3.5R
Dorso lateral Humerus plate 3.5mm right
5 holes SINGLE PIECE PACK
111 OI 4 e3.5R
Dorso lateral Humerus plate 3.5mm right
7 holes SINGLE PIECE PACK
113 OI 4
g3.5R Dorso lateral Humerus plate 3.5mm
right 9 holes SINGLE PIECE PACK
120 OI 5 bL Extra-articular distal Humerus plate
3.5 left 4 holes SINGLE PIECE PACK
122 OI 5 dL Extra-articular distal Humerus plate
3.5 left 6 holes SINGLE PIECE PACK
124 OI 5 fL Extra-articular distal Humerus plate
3.5 left 8 holes SINGLE PIECE PACK
126 OI 5 hL Extra-articular distal Humerus plate
3.5 left 10 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
255 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
128 OI 5 jL Extra-articular distal Humerus plate
3.5 left 12 holes SINGLE PIECE PACK
132 OI 5 bR Extra-articular distal Humerus plate
3.5right 4 holes SINGLE PIECE PACK
134 OI 5 dR Extra-articular distal Humerus plate
3.5right 6 holes SINGLE PIECE PACK
136 OI 5 fR Extra-articular distal Humerus plate
3.5right 8 holes SINGLE PIECE PACK
138 OI 5 hR Extra-articular distal Humerus plate
3.5right 10 holes SINGLE PIECE PACK
140 OI 5 jR Extra-articular distal Humerus plate
3.5right 12 holes SINGLE PIECE PACK
143 OI 6 a Locking DCP Narrow plate
4.5mm/5.0mm locking screw 3 holes SINGLE PIECE PACK
144 OI 6 b Locking DCP Narrow plate
4.5mm/5.0mm locking screw 4 holes SINGLE PIECE PACK
145 OI 6c Locking DCP Narrow plate
4.5mm/5.0mm locking screw 5 holes SINGLE PIECE PACK
146 OI 6 d Locking DCP Narrow plate
4.5mm/5.0mm locking screw 6 holes SINGLE PIECE PACK
147 OI 6 e Locking DCP Narrow plate
4.5mm/5.0mm locking screw 7 holes SINGLE PIECE PACK
148 OI 6 f Locking DCP Narrow plate
4.5mm/5.0mm locking screw 8 holes SINGLE PIECE PACK
149 OI 6 g Locking DCP Narrow plate
4.5mm/5.0mm locking screw 9 holes SINGLE PIECE PACK
150 OI 6 h Locking DCP Narrow plate
4.5mm/5.0mm locking screw 10 holes SINGLE PIECE PACK
151 OI 6 i Locking DCP Narrow plate
4.5mm/5.0mm locking screw 11 holes SINGLE PIECE PACK
152 OI 6 l Locking DCP Narrow plate
4.5mm/5.0mm locking screw 12 holes SINGLE PIECE PACK
153 OI 6k Locking DCP Narrow plate
4.5mm/5.0mm locking screw 13 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
256 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
154 OI 6 l Locking DCP Narrow plate
4.5mm/5.0mm locking screw 14 holes SINGLE PIECE PACK
155 OI 6 m Locking DCP Narrow plate
4.5mm/5.0mm locking screw 15 holes SINGLE PIECE PACK
156 OI 6 n Locking DCP Narrow plate
4.5mm/5.0mm locking screw 16 holes SINGLE PIECE PACK
157 OI 6 o Locking DCP Narrow plate
4.5mm/5.0mm locking screw 17 holes SINGLE PIECE PACK
158 OI 6 p Locking DCP Narrow plate
4.5mm/5.0mm locking screw 18 holes SINGLE PIECE PACK
175 OI 14 aL T-PLATE OBLIQUE ANGLED LEFT
3.5MM 3X3 HOLES SINGLE PIECE PACK
176 OI 14 bL T-PLATE OBLIQUE ANGLED LEFT
3.5MM 3X4 HOLES SINGLE PIECE PACK
177 OI 14 cL T-PLATE OBLIQUE ANGLED LEFT
3.5MM 3X5 HOLES SINGLE PIECE PACK
178 OI 14 dL T-PLATE OBLIQUE ANGLED LEFT
3.5MM 3X6 HOLES SINGLE PIECE PACK
179 OI 14 aR T-PLATE OBLIQUE ANGLED RIGHT
3.5MM 3X3 HOLES SINGLE PIECE PACK
180 OI 14 bR T-PLATE OBLIQUE ANGLED RIGHT
3.5MM 3X4 HOLES SINGLE PIECE PACK
181 OI 14 cR T-PLATE OBLIQUE ANGLED RIGHT
3.5MM 3X5 HOLES SINGLE PIECE PACK
182 OI 14 dR T-PLATE OBLIQUE ANGLED RIGHT
3.5MM 3X6 HOLES SINGLE PIECE PACK
183 OI 15 a T-PLATE RIGHT ANGLED 3.5MM 3X3 HOLES SINGLE PIECE PACK
184 OI 15 b T-PLATE RIGHT ANGLED 3.5MM 3X4 HOLES SINGLE PIECE PACK
185 OI 15 c T-PLATE RIGHT ANGLED 3.5MM 3X5 HOLES SINGLE PIECE PACK
186 OI 15 d T-PLATE RIGHT ANGLED 3.5MM 3X6 HOLES SINGLE PIECE PACK
187 OI 16 PROXIMAL ULNA HOOK PLATE
3.5MM 3 HOLES SINGLE PIECE PACK
OI 17 a SMALL T PLATE 3.5MM 3 Holes
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
257 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
OI 17b SMALL T PLATE 3.5MM 4 Holes
188 OI 17 c SMALL T PLATE 3.5MM 5 holes SINGLE PIECE PACK
189 OI 17d SMALL T PLATE 3.5MM 6 holes SINGLE PIECE PACK
190 OI 17 e SMALL T PLATE 3.5MM 7 holes SINGLE PIECE PACK
191 OI 17f SMALL T PLATE 3.5MM 8 holes SINGLE PIECE PACK
196 OI 18 a2.4L
DISTAL ANTERIOR RADIUS T-PLATE (OBLIQUE) 2.4MM LEFT
3X3 HOLES SINGLE PIECE PACK
197 OI 18 b2.4L
DISTAL ANTERIOR RADIUS T-PLATE (OBLIQUE) 2.4MM LEFT
3X4 HOLES SINGLE PIECE PACK
198 OI 18 c2.4L
DISTAL ANTERIOR RADIUS T-PLATE (OBLIQUE) 2.4MM LEFT
3X5 HOLES SINGLE PIECE PACK
199 OI 18 a2.4R
DISTAL ANTERIOR RADIUS T-PLATE (OBLIQUE) 2.4MM RIGHT
3X3 HOLES SINGLE PIECE PACK
200 OI 18 b2.4R
DISTAL ANTERIOR RADIUS T-PLATE (OBLIQUE) 2.4MM RIGHT
3X4 HOLES SINGLE PIECE PACK
201 OI 18 c2.4R
DISTAL ANTERIOR RADIUS T-PLATE (OBLIQUE) 2.4MM RIGHT
3X5 HOLES SINGLE PIECE PACK
202 OI 18 a2.7L
DISTAL ANTERIOR RADIUS T-PLATE (OBLIQUE) 2.7MM LEFT
3X3 HOLES SINGLE PIECE PACK
203 OI 18 b2.7L
DISTAL ANTERIOR RADIUS T-PLATE (OBLIQUE) 2.7MM LEFT
3X4 HOLES SINGLE PIECE PACK
204 OI 18 c2.7L
DISTAL ANTERIOR RADIUS T-PLATE (OBLIQUE) 2.7MM LEFT
3X5 HOLES SINGLE PIECE PACK
205 OI 18 a2.7R
DISTAL ANTERIOR RADIUS T-PLATE (OBLIQUE) 2.7MM RIGHT
3X3 HOLES SINGLE PIECE PACK
206 OI 18
b2.7R
DISTAL ANTERIOR RADIUS T-
PLATE (OBLIQUE) 2.7MM RIGHT 3X4 HOLES SINGLE PIECE PACK
207 OI 18 c2.7R
DISTAL ANTERIOR RADIUS T-PLATE (OBLIQUE) 2.7MM RIGHT
3X5 HOLES SINGLE PIECE PACK
208 OI 19 a2.4L
DISTAL RADIUS PLATE LONG 2.4MM LEFT
5 holes SINGLE PIECE PACK
209 OI 19 b2.4L
DISTAL RADIUS PLATE LONG 2.4MM LEFT
6 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
258 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
210 OI 19 c2.4L
DISTAL RADIUS PLATE LONG 2.4MM LEFT
7 holes SINGLE PIECE PACK
211 OI 19 d2.4L
DISTAL RADIUS PLATE LONG 2.4MM LEFT
8 holes SINGLE PIECE PACK
212 OI 19 e2.4L
DISTAL RADIUS PLATE LONG 2.4MM LEFT
9 holes SINGLE PIECE PACK
213 OI 19 f2.4L
DISTAL RADIUS PLATE LONG 2.4MM LEFT
10 holes SINGLE PIECE PACK
214 OI 19 g2.4L
DISTAL RADIUS PLATE LONG 2.4MM LEFT
11 holes SINGLE PIECE PACK
215 OI 19 h2.4L
DISTAL RADIUS PLATE LONG 2.4MM LEFT
12 holes SINGLE PIECE PACK
220 OI 19 a2.4R
DISTAL RADIUS PLATE LONG 2.4MM RIGHT
5 holes SINGLE PIECE PACK
221 OI 19 b2.4R
DISTAL RADIUS PLATE LONG 2.4MM RIGHT
6 holes SINGLE PIECE PACK
222 OI 19
c2.4R
DISTAL RADIUS PLATE LONG
2.4MM RIGHT 7 holes SINGLE PIECE PACK
223 OI 19 d2.4R
DISTAL RADIUS PLATE LONG 2.4MM RIGHT
8 holes SINGLE PIECE PACK
224 OI 19 e2.4R
DISTAL RADIUS PLATE LONG 2.4MM RIGHT
9 holes SINGLE PIECE PACK
225 OI 19 f2.4R
DISTAL RADIUS PLATE LONG 2.4MM RIGHT
10 holes SINGLE PIECE PACK
226 OI 19 g2.4R
DISTAL RADIUS PLATE LONG 2.4MM RIGHT
11 holes SINGLE PIECE PACK
227 OI 19 h2.4R
DISTAL RADIUS PLATE LONG 2.4MM RIGHT
12 holes SINGLE PIECE PACK
232 OI 19 a3.5L
DISTAL RADIUS PLATE LONG 3.5MM LEFT
5 holes SINGLE PIECE PACK
233 OI 19 b3.5L
DISTAL RADIUS PLATE LONG 3.5MM LEFT
6 holes SINGLE PIECE PACK
234 OI 19 c3.5L
DISTAL RADIUS PLATE LONG 3.5MM LEFT
7 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
259 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
235 OI 19 d3.5L
DISTAL RADIUS PLATE LONG 3.5MM LEFT
8 holes SINGLE PIECE PACK
236 OI 19 e3.5L
DISTAL RADIUS PLATE LONG 3.5MM LEFT
9 holes SINGLE PIECE PACK
237 OI 19 f3.5L
DISTAL RADIUS PLATE LONG 3.5MM LEFT
10 holes SINGLE PIECE PACK
244 OI 19 a3.5R
DISTAL RADIUS PLATE LONG 3.5MM RIGHT
5 holes SINGLE PIECE PACK
245 OI 19 b3.5R
DISTAL RADIUS PLATE LONG 3.5MM RIGHT
6 holes SINGLE PIECE PACK
246 OI 19 c3.5R
DISTAL RADIUS PLATE LONG 3.5MM RIGHT
7 holes SINGLE PIECE PACK
247 OI 19 d3.5R
DISTAL RADIUS PLATE LONG 3.5MM RIGHT
8 holes SINGLE PIECE PACK
248 OI 19 e3.5R
DISTAL RADIUS PLATE LONG 3.5MM RIGHT
9 holes SINGLE PIECE PACK
249 OI 19
f3.5R
DISTAL RADIUS PLATE LONG
3.5MM RIGHT 10 holes SINGLE PIECE PACK
250 OI 19 g3.5R
DISTAL RADIUS PLATE LONG 3.5MM RIGHT
11 holes SINGLE PIECE PACK
256 OI 20 a ONE THIRD TUBULAR PLATE 3.5
MM 3 holes SINGLE PIECE PACK
257 OI 20 b ONE THIRD TUBULAR PLATE 3.5
MM 4 holes SINGLE PIECE PACK
258 OI 20 c ONE THIRD TUBULAR PLATE 3.5
MM 5 holes SINGLE PIECE PACK
259 OI 20 d ONE THIRD TUBULAR PLATE 3.5
MM 6 holes SINGLE PIECE PACK
260 OI 20 e ONE THIRD TUBULAR PLATE 3.5
MM 7 holes SINGLE PIECE PACK
261 OI 20 f ONE THIRD TUBULAR PLATE 3.5
MM 8 holes SINGLE PIECE PACK
262 OI 20 g ONE THIRD TUBULAR PLATE 3.5
MM 9 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
260 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
263 OI 20 h ONE THIRD TUBULAR PLATE 3.5
MM 10 holes SINGLE PIECE PACK
264 OI 20 i ONE THIRD TUBULAR PLATE 3.5
MM 11 holes SINGLE PIECE PACK
265 OI 20 j ONE THIRD TUBULAR PLATE 3.5
MM 12 holes SINGLE PIECE PACK
266 OI 20 k ONE THIRD TUBULAR PLATE 3.5
MM 13 holes SINGLE PIECE PACK
267 OI 20 l ONE THIRD TUBULAR PLATE 3.5
MM 14 holes SINGLE PIECE PACK
268 OI 21 a T-PLATE 3.5MM RIGHT ANGLED 3 holes SINGLE PIECE PACK
269 OI 21 b T-PLATE 3.5MM RIGHT ANGLED 4 holes SINGLE PIECE PACK
270 OI 21 c T-PLATE 3.5MM RIGHT ANGLED 5 holes SINGLE PIECE PACK
271 OI 21 d T-PLATE 3.5MM RIGHT ANGLED 6 holes SINGLE PIECE PACK
272 OI 21 e T-PLATE 3.5MM RIGHT ANGLED 7 holes SINGLE PIECE PACK
273 OI 21 f T-PLATE 3.5MM RIGHT ANGLED 8 holes SINGLE PIECE PACK
274 OI 22 a LOCKNIG DCP SMALL PLATE 3.5MM 4 holes SINGLE PIECE PACK
275 OI 22 b LOCKNIG DCP SMALL PLATE 3.5MM 5 holes SINGLE PIECE PACK
276 OI 22 c LOCKNIG DCP SMALL PLATE 3.5MM 6 holes SINGLE PIECE PACK
277 OI 22 d LOCKNIG DCP SMALL PLATE 3.5MM 7 holes SINGLE PIECE PACK
278 OI 22 e LOCKNIG DCP SMALL PLATE 3.5MM 8 holes SINGLE PIECE PACK
279 OI 22 f LOCKNIG DCP SMALL PLATE 3.5MM 9 holes SINGLE PIECE PACK
280 OI 22 g LOCKNIG DCP SMALL PLATE 3.5MM 10 holes SINGLE PIECE PACK
281 OI 22h LOCKNIG DCP SMALL PLATE 3.5MM 11 holes SINGLE PIECE PACK
282 OI 22 i LOCKNIG DCP SMALL PLATE 3.5MM 12 holes SINGLE PIECE PACK
283 OI 32 a One Third Tubular Plate 4.5mm 3 holes SINGLE PIECE PACK
284 OI 32 b One Third Tubular Plate 4.5mm 4 holes SINGLE PIECE PACK
285 OI 32 c One Third Tubular Plate 4.5mm 5 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
261 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
286 OI 32 d One Third Tubular Plate 4.5mm 6 holes SINGLE PIECE PACK
287 OI 32 e One Third Tubular Plate 4.5mm 7 holes SINGLE PIECE PACK
288 OI 32 f One Third Tubular Plate 4.5mm 8 holes SINGLE PIECE PACK
289 OI 32 g One Third Tubular Plate 4.5mm 9 holes SINGLE PIECE PACK
290 OI 32 h One Third Tubular Plate 4.5mm 10 holes SINGLE PIECE PACK
291 OI 33 a D.C.P. SMALL NON LOCKING
3.5MM 5 holes SINGLE PIECE PACK
292 OI 33 b D.C.P. SMALL NON LOCKING
3.5MM 6 holes SINGLE PIECE PACK
293 OI 33 c D.C.P. SMALL NON LOCKING
3.5MM 7 holes SINGLE PIECE PACK
294 OI 33 d D.C.P. SMALL NON LOCKING
3.5MM 8 holes SINGLE PIECE PACK
295 OI 33 e D.C.P. SMALL NON LOCKING
3.5MM 9 holes SINGLE PIECE PACK
296 OI 33 f D.C.P. SMALL NON LOCKING
3.5MM 10 holes SINGLE PIECE PACK
297 OI 34 a CLOVERLEAF PLATE 3.5MM 3 holes SINGLE PIECE PACK
298 OI 34 b CLOVERLEAF PLATE 3.5MM 4 holes SINGLE PIECE PACK
299 OI 34 c CLOVERLEAF PLATE 3.5MM 5 holes SINGLE PIECE PACK
300 OI 34 d CLOVERLEAF PLATE 3.5MM 6 holes SINGLE PIECE PACK
301 OI 34 e CLOVERLEAF PLATE 3.5MM 7 holes SINGLE PIECE PACK
302 OI 34 f CLOVERLEAF PLATE 3.5MM 8 holes SINGLE PIECE PACK
303 OI 35 a RECONSTRUCTION PLATE 3.5MM 5 holes SINGLE PIECE PACK
304 OI 35 b RECONSTRUCTION PLATE 3.5MM 6 holes SINGLE PIECE PACK
305 OI 35 c RECONSTRUCTION PLATE 3.5MM 7 holes SINGLE PIECE PACK
306 OI 35 d RECONSTRUCTION PLATE 3.5MM 8 holes SINGLE PIECE PACK
303 OI 35 a RECONSTRUCTION PLATE 3.5MM 9 holes SINGLE PIECE PACK
304 OI 35 b RECONSTRUCTION PLATE 3.5MM 10 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
262 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
305 OI 35 c RECONSTRUCTION PLATE 3.5MM 11 holes SINGLE PIECE PACK
306 OI 35 d RECONSTRUCTION PLATE 3.5MM 12 holes SINGLE PIECE PACK
303 OI 35 a RECONSTRUCTION PLATE 3.5MM 13 holes SINGLE PIECE PACK
304 OI 35 b RECONSTRUCTION PLATE 3.5MM 14 holes SINGLE PIECE PACK
305 OI 35 c RECONSTRUCTION PLATE 3.5MM 15 holes SINGLE PIECE PACK
306 OI 35 d RECONSTRUCTION PLATE 3.5MM 16 holes SINGLE PIECE PACK
HAND/FOOT PLATES
307 OI 36 a2.0
T-PLATE 2.0MM 3 holes SINGLE PIECE PACK
308 OI 36 b2.0
T-PLATE 2.0MM 4 holes SINGLE PIECE PACK
309 OI 36 c2.0
T-PLATE 2.0MM 5 holes SINGLE PIECE PACK
310 OI 36 d2.0
T-PLATE 2.0MM 6 holes SINGLE PIECE PACK
311 OI 36 a3.5
T-PLATE 3.5MM 3 holes SINGLE PIECE PACK
312 OI 36 b3.5
T-PLATE 3.5MM 4 holes SINGLE PIECE PACK
313 OI 36 c3.5
T-PLATE 3.5MM 5 holes SINGLE PIECE PACK
314 OI 36 d3.5
T-PLATE 3.5MM 6 holes SINGLE PIECE PACK
315 OI 37 a T-PLATE OBLIQUE ANGLED 3.5MM 3 holes SINGLE PIECE PACK
316 OI 37b T-PLATE OBLIQUE ANGLED 3.5MM 4 holes SINGLE PIECE PACK
317 OI 37 c T-PLATE OBLIQUE ANGLED 3.5MM 5 holes SINGLE PIECE PACK
318 OI 37 d T-PLATE OBLIQUE ANGLED 3.5MM 6 holes SINGLE PIECE PACK
319 OI
38a2.7 L-PLATE 2.7MM 3 holes SINGLE PIECE PACK
320 OI
38b2.7 L-PLATE 2.7MM 4 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
263 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
321 OI
38a3.5 L-PLATE 3.5MM 3 holes SINGLE PIECE PACK
322 OI
38b3.5 L-PLATE 3.5MM 4 holes SINGLE PIECE PACK
323 OI
38c3.5 L-PLATE 3.5MM 5 holes SINGLE PIECE PACK
324 OI
38d3.5 L-PLATE 3.5MM 6 holes SINGLE PIECE PACK
325 OI
38e3.5 L-PLATE 3.5MM 7 holes SINGLE PIECE PACK
326 OI
38f3.5 L-PLATE 3.5MM 8 holes SINGLE PIECE PACK
327 OI
38g3.5 L-PLATE 3.5MM 9 holes SINGLE PIECE PACK
328 OI
38h3.5 L-PLATE 3.5MM 10 holes SINGLE PIECE PACK
329 OI 39L L-PLATE 2.7MM LEFT SINGLE PIECE PACK
330 OI 39R L-PLATE 2.7MM RIGHT SINGLE PIECE PACK
331 OI 40 a MINI STRAIGHT PLATE 2.0 MM 3 holes SINGLE PIECE PACK
332 OI 40 b MINI STRAIGHT PLATE 2.0 MM 4 holes SINGLE PIECE PACK
333 OI 40 c MINI STRAIGHT PLATE 2.0 MM 5 holes SINGLE PIECE PACK
334 OI 40 d MINI STRAIGHT PLATE 2.0 MM 6 holes SINGLE PIECE PACK
335 OI 40 e MINI STRAIGHT PLATE 2.0 MM 7 holes SINGLE PIECE PACK
336 OI 40 f MINI STRAIGHT PLATE 2.0 MM 8 holes SINGLE PIECE PACK
337 OI 40 g MINI STRAIGHT PLATE 2.0 MM 9 holes SINGLE PIECE PACK
338 OI 40 h MINI STRAIGHT PLATE 2.0 MM 10 holes SINGLE PIECE PACK
339 OI 41 a DCP 2.7MM 3 holes SINGLE PIECE PACK
340 OI 41 b DCP 2.7MM 4 holes SINGLE PIECE PACK
341 OI 41 c DCP 2.7MM 5 holes SINGLE PIECE PACK
342 OI 41 d DCP 2.7MM 6 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
264 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
343 OI 41 e DCP 2.7MM 7 holes SINGLE PIECE PACK
344 OI 41 f DCP 2.7MM 8 holes SINGLE PIECE PACK
345 OI 41 g DCP 2.7MM 9 holes SINGLE PIECE PACK
346 OI 41 h DCP 2.7MM 10 holes SINGLE PIECE PACK
347 OI 41 i DCP 2.7MM 11 holes SINGLE PIECE PACK
348 OI 41 j DCP 2.7MM 12 holes SINGLE PIECE PACK
349 OI 41 k DCP 2.7MM 13 holes SINGLE PIECE PACK
350 OI 41 l DCP 2.7MM 14 holes SINGLE PIECE PACK
FEMORAL PLATES SINGLE PIECE PACK
352 OI 42 bL4.5
PROXIMAL FEMUR Locking PLATE 4.5 LEFT/5.0MM Locking screw
4 holes SINGLE PIECE PACK
354 OI 42 dL4.5
PROXIMAL FEMUR Locking PLATE 4.5 LEFT/5.0MM Locking screw
6 holes SINGLE PIECE PACK
356 OI 42
fL4.5
PROXIMAL FEMUR Locking PLATE
4.5 LEFT/5.0MM Locking screw 8 holes SINGLE PIECE PACK
358 OI 42 hL4.5
PROXIMAL FEMUR Locking PLATE 4.5 LEFT/5.0MM Locking screw
10 holes SINGLE PIECE PACK
360 OI 42 jL4.5
PROXIMAL FEMUR Locking PLATE 4.5 LEFT/5.0MM Locking screw
12 holes SINGLE PIECE PACK
368 OI 42 bR4.5
PROXIMAL FEMUR LOCKING PLATE 4.5 RIGHT/5.0MM LOCKING SCREW
4 holes SINGLE PIECE PACK
370 OI 42 aR4.5
PROXIMAL FEMUR LOCKING PLATE 4.5 RIGHT/5.0MM LOCKING SCREW
6 holes SINGLE PIECE PACK
372 OI 42 aR4.5
PROXIMAL FEMUR LOCKING PLATE 4.5 RIGHT/5.0MM LOCKING SCREW
8 holes SINGLE PIECE PACK
374 OI 42 aR4.5
PROXIMAL FEMUR LOCKING PLATE 4.5 RIGHT/5.0MM LOCKING SCREW
10 holes SINGLE PIECE PACK
376 OI 42 aR4.5
PROXIMAL FEMUR LOCKING PLATE 4.5 RIGHT/5.0MM LOCKING SCREW
12 holes SINGLE PIECE PACK
414 OI 42 pR5.0
PROXIMAL FEMUR PLATE 5.0 RIGHT
18 HOLES SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
265 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
416 OI 43 b4.5L
PROXIMAL FEMUR LOCKING HOOK PLATE 4.5 LEFT/5.0MM LOCKING
SCREW 4 holes SINGLE PIECE PACK
418 OI 43 d4.5L
PROXIMAL FEMUR LOCKING HOOK PLATE 4.5 LEFT/5.0MM LOCKING
SCREW 6 holes SINGLE PIECE PACK
420 OI 43 f4.5L
PROXIMAL FEMUR LOCKING HOOK PLATE 4.5 LEFT/5.0MM LOCKING
SCREW 8 holes SINGLE PIECE PACK
422 OI 43 h4.5L
PROXIMAL FEMUR LOCKING HOOK PLATE 4.5 LEFT/5.0MM LOCKING
SCREW 10 holes SINGLE PIECE PACK
424 OI 43 j4.5L
PROXIMAL FEMUR LOCKING HOOK PLATE 4.5 LEFT/5.0MM LOCKING
SCREW 12 holes SINGLE PIECE PACK
426 OI 43 l4.5L
PROXIMAL FEMUR LOCKING HOOK PLATE 4.5 LEFT/5.0MM LOCKING
SCREW 14 holes SINGLE PIECE PACK
432 OI 43 b4.5R
PROXIMAL FEMUR LOCKING HOOK PLATE 4.5RIGHT/5.0MM LOCKING
SCREW 4 holes SINGLE PIECE PACK
434 OI 43 d4.5R
PROXIMAL FEMUR LOCKING HOOK PLATE 4.5RIGHT/5.0MM LOCKING
SCREW 6 holes SINGLE PIECE PACK
436 OI 43 f4.5R
PROXIMAL FEMUR LOCKING HOOK PLATE 4.5RIGHT/5.0MM LOCKING
SCREW 8 holes SINGLE PIECE PACK
438 OI 43 h4.5R
PROXIMAL FEMUR LOCKING HOOK
PLATE 4.5RIGHT/5.0MM LOCKING SCREW
10 holes SINGLE PIECE PACK
440 OI 43 j4.5R
PROXIMAL FEMUR LOCKING HOOK PLATE 4.5RIGHT/5.0MM LOCKING
SCREW 12 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
266 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
442 OI 43 l4.5R
PROXIMAL FEMUR LOCKING HOOK PLATE 4.5RIGHT/5.0MM LOCKING
SCREW 14 holes SINGLE PIECE PACK
479 OI 44 a DHS BARREL PLATE 3 holes SINGLE PIECE PACK
480 OI 44 b DHS BARREL PLATE 4 holes SINGLE PIECE PACK
481 OI 44 c DHS BARREL PLATE 5 holes SINGLE PIECE PACK
482 OI 44 d DHS BARREL PLATE 6 holes SINGLE PIECE PACK
483 OI 44 e DHS BARREL PLATE 7 holes SINGLE PIECE PACK
484 OI 44 f DHS BARREL PLATE 8 holes SINGLE PIECE PACK
485 OI 44 g DHS BARREL PLATE 9 holes SINGLE PIECE PACK
486 OI 44 h DHS BARREL PLATE 10 holes SINGLE PIECE PACK
487 OI 44 i DHS BARREL PLATE 11 holes SINGLE PIECE PACK
488 OI 44 j DHS BARREL PLATE 12 holes SINGLE PIECE PACK
489 OI 44 k DHS BARREL PLATE 13 holes SINGLE PIECE PACK
490 OI 44 l DHS BARREL PLATE 14 holes SINGLE PIECE PACK
491 OI 44 m DHS BARREL PLATE 15 holes SINGLE PIECE PACK
492 OI 44 n DHS BARREL PLATE 16 HOLES SINGLE PIECE PACK
493 OI 44 o DHS BARREL PLATE 17 holes SINGLE PIECE PACK
494 OI 44 p DHS BARREL PLATE 18 HOLES SINGLE PIECE PACK
495 OI 45a DHS/DCS LAG SCREW 45MM SINGLE PIECE PACK
496 OI 45b DHS/DCS LAG SCREW 50 MM SINGLE PIECE PACK
497 OI 45c DHS/DCS LAG SCREW 55MM SINGLE PIECE PACK
498 OI 45d DHS/DCS LAG SCREW 60 MM SINGLE PIECE PACK
499 OI 45e DHS/DCS LAG SCREW 65MM SINGLE PIECE PACK
500 OI 45f DHS/DCS LAG SCREW 70MM SINGLE PIECE PACK
501 OI 45g DHS/DCS LAG SCREW 75MM SINGLE PIECE PACK
502 OI 45h DHS/DCS LAG SCREW 80MM SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
267 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
503 OI 45i DHS/DCS LAG SCREW 85MM SINGLE PIECE PACK
504 OI 45j DHS/DCS LAG SCREW 90MM SINGLE PIECE PACK
505 OI 45k DHS/DCS LAG SCREW 95MM SINGLE PIECE PACK
506 OI 45l DHS/DCS LAG SCREW 100MM SINGLE PIECE PACK
507 OI 45m DHS/DCS LAG SCREW 105MM SINGLE PIECE PACK
508 OI 45n DHS/DCS LAG SCREW 110MM SINGLE PIECE PACK
509 OI 45o DHS/DCS LAG SCREW 115MM SINGLE PIECE PACK
510 OI 45p DHS/DCS LAG SCREW 120MM SINGLE PIECE PACK
511 OI 46 aL CONDYLAR BUTTERESS PLATE
LEFT 5 holes SINGLE PIECE PACK
512 OI 46 bL CONDYLAR BUTTERESS PLATE
LEFT 6 holes SINGLE PIECE PACK
513 OI 46 cL CONDYLAR BUTTERESS PLATE
LEFT 7 holes SINGLE PIECE PACK
514 OI 46 dL CONDYLAR BUTTERESS PLATE
LEFT 8 holes SINGLE PIECE PACK
515 OI 46 eL CONDYLAR BUTTERESS PLATE
LEFT 9 holes SINGLE PIECE PACK
516 OI 46 fL CONDYLAR BUTTERESS PLATE
LEFT 10 holes SINGLE PIECE PACK
517 OI 46 gL CONDYLAR BUTTERESS PLATE
LEFT 11 holes SINGLE PIECE PACK
518 OI 46 hL CONDYLAR BUTTERESS PLATE
LEFT 12 holes SINGLE PIECE PACK
519 OI 46 iL CONDYLAR BUTTERESS PLATE
LEFT 13 holes SINGLE PIECE PACK
520 OI 46 jL CONDYLAR BUTTERESS PLATE
LEFT 14 holes SINGLE PIECE PACK
525 OI 46 aR CONDYLAR BUTTERESS PLATE
RIGHT 5 holes SINGLE PIECE PACK
526 OI 46 bR CONDYLAR BUTTERESS PLATE
RIGHT 6 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
268 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
527 OI 46 cR CONDYLAR BUTTERESS PLATE
RIGHT 7 holes SINGLE PIECE PACK
528 OI 46 dR CONDYLAR BUTTERESS PLATE
RIGHT 8 holes SINGLE PIECE PACK
529 OI 46 eR CONDYLAR BUTTERESS PLATE
RIGHT 9 holes SINGLE PIECE PACK
530 OI 46 fR CONDYLAR BUTTERESS PLATE
RIGHT 10 holes SINGLE PIECE PACK
531 OI 46 gR CONDYLAR BUTTERESS PLATE
RIGHT 11 holes SINGLE PIECE PACK
532 OI 46 hR CONDYLAR BUTTERESS PLATE
RIGHT 12 holes SINGLE PIECE PACK
533 OI 46 iR CONDYLAR BUTTERESS PLATE
RIGHT 13 holes SINGLE PIECE PACK
534 OI 46 jR CONDYLAR BUTTERESS PLATE
RIGHT 14 holes SINGLE PIECE PACK
539 OI 47 a DCS BARREL PLATE 95° WITH 'DC'
HOLES 5 holes SINGLE PIECE PACK
540 OI 47 b DCS BARREL PLATE 95° WITH 'DC'
HOLES 6 holes SINGLE PIECE PACK
541 OI 47 c DCS BARREL PLATE 95° WITH 'DC'
HOLES 7 holes SINGLE PIECE PACK
542 OI 47 d DCS BARREL PLATE 95° WITH 'DC'
HOLES 8 holes SINGLE PIECE PACK
543 OI 47 e DCS BARREL PLATE 95° WITH 'DC'
HOLES 9 holes SINGLE PIECE PACK
544 OI 47 f DCS BARREL PLATE 95° WITH 'DC'
HOLES 10 holes SINGLE PIECE PACK
545 OI 47 g DCS BARREL PLATE 95° WITH 'DC'
HOLES 11 holes SINGLE PIECE PACK
546 OI 47 h DCS BARREL PLATE 95° WITH 'DC'
HOLES 12 holes SINGLE PIECE PACK
547 OI 47 i DCS BARREL PLATE 95° WITH 'DC'
HOLES 13 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
269 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
548 OI 47 j DCS BARREL PLATE 95° WITH 'DC'
HOLES 14 holes SINGLE PIECE PACK
549 OI 47 k DCS BARREL PLATE 95° WITH 'DC'
HOLES 15 holes SINGLE PIECE PACK
550 OI 47 l DCS BARREL PLATE 95° WITH 'DC'
HOLES 16 HOLES SINGLE PIECE PACK
551 OI 48 a4.5
LOCKING DCP BROAD LOCKING PLATE 4.5MM/5.0MM LOCKING
SCREW 3 holes SINGLE PIECE PACK
552 OI 48 b4.5
LOCKING DCP BROAD LOCKING PLATE 4.5MM/5.0MM LOCKING
SCREW 4 holes SINGLE PIECE PACK
553 OI 48 c4.5
LOCKING DCP BROAD LOCKING PLATE 4.5MM/5.0MM LOCKING
SCREW 5 holes SINGLE PIECE PACK
554 OI 48 d4.5
LOCKING DCP BROAD LOCKING PLATE 4.5MM/5.0MM LOCKING
SCREW
6 holes SINGLE PIECE PACK
555 OI 48 e4.5
LOCKING DCP BROAD LOCKING PLATE 4.5MM/5.0MM LOCKING
SCREW 7 holes SINGLE PIECE PACK
556 OI 48 f4.5
LOCKING DCP BROAD LOCKING PLATE 4.5MM/5.0MM LOCKING
SCREW 8 holes SINGLE PIECE PACK
557 OI 48 g4.5
LOCKING DCP BROAD LOCKING PLATE 4.5MM/5.0MM LOCKING
SCREW 9 holes SINGLE PIECE PACK
558 OI 48 h4.5
LOCKING DCP BROAD LOCKING
PLATE 4.5MM/5.0MM LOCKING SCREW
10 holes SINGLE PIECE PACK
559 OI 48 i4.5
LOCKING DCP BROAD LOCKING PLATE 4.5MM/5.0MM LOCKING
SCREW 11 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
270 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
560 OI 48 j4.5
LOCKING DCP BROAD LOCKING PLATE 4.5MM/5.0MM LOCKING
SCREW 12 holes SINGLE PIECE PACK
561 OI 48 k4.5
LOCKING DCP BROAD LOCKING PLATE 4.5MM/5.0MM LOCKING
SCREW 13 holes SINGLE PIECE PACK
562 OI 48 l4.5
LOCKING DCP BROAD LOCKING PLATE 4.5MM/5.0MM LOCKING
SCREW 14 holes SINGLE PIECE PACK
563 OI 48 m4.5
LOCKING DCP BROAD LOCKING PLATE 4.5MM/5.0MM LOCKING
SCREW 15 holes SINGLE PIECE PACK
564 OI 48 n4.5
LOCKING DCP BROAD LOCKING PLATE 4.5MM/5.0MM LOCKING
SCREW 16 HOLES SINGLE PIECE PACK
565 OI 48 o4.5
LOCKING DCP BROAD LOCKING PLATE 4.5MM/5.0MM LOCKING
SCREW 17 holes SINGLE PIECE PACK
566 OI 48 p4.5
LOCKING DCP BROAD LOCKING PLATE 4.5MM/5.0MM LOCKING
SCREW 18 HOLES SINGLE PIECE PACK
583 OI 49 a4.5
BROAD PLATE CURVED 4.5MM 12 holes SINGLE PIECE PACK
584 OI 49 b4.5
BROAD PLATE CURVED 4.5MM 13 holes SINGLE PIECE PACK
585 OI 49 c4.5
BROAD PLATE CURVED 4.5MM 14 holes SINGLE PIECE PACK
586 OI 49 d4.5
BROAD PLATE CURVED 4.5MM 15 holes SINGLE PIECE PACK
587 OI 49 e4.5
BROAD PLATE CURVED 4.5MM 16 HOLES SINGLE PIECE PACK
588 OI 49 f4.5
BROAD PLATE CURVED 4.5MM 17 holes SINGLE PIECE PACK
589 OI 49 g4.5
BROAD PLATE CURVED 4.5MM 18 HOLES SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
271 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
590 OI 49 h4.5
BROAD PLATE CURVED 4.5MM 19 holes SINGLE PIECE PACK
591 OI 49 i4.5
BROAD PLATE CURVED 4.5MM 20 holes SINGLE PIECE PACK
592 OI 49 j4.5
BROAD PLATE CURVED 4.5MM 21 HOLES SINGLE PIECE PACK
593 OI 49 k4.5
BROAD PLATE CURVED 4.5MM 22 holes SINGLE PIECE PACK
594 OI 49 l4.5
BROAD PLATE CURVED 4.5MM 23 HOLES SINGLE PIECE PACK
607 OI 50 a DCP BROAD NON LOCKING PLATE
4.5MM 3 holes SINGLE PIECE PACK
608 OI 50 b DCP BROAD NON LOCKING PLATE
4.5MM 4 holes SINGLE PIECE PACK
609 OI 50 c DCP BROAD NON LOCKING PLATE
4.5MM 5 holes SINGLE PIECE PACK
610 OI 50 d DCP BROAD NON LOCKING PLATE
4.5MM 6 holes SINGLE PIECE PACK
611 OI 50 e DCP BROAD NON LOCKING PLATE
4.5MM 7 holes SINGLE PIECE PACK
612 OI 50 f DCP BROAD NON LOCKING PLATE
4.5MM 8 holes SINGLE PIECE PACK
613 OI 50 g DCP BROAD NON LOCKING PLATE
4.5MM 9 holes SINGLE PIECE PACK
614 OI 50 h DCP BROAD NON LOCKING PLATE
4.5MM 10 holes SINGLE PIECE PACK
615 OI 50 i DCP BROAD NON LOCKING PLATE
4.5MM 11 holes SINGLE PIECE PACK
616 OI 50 j DCP BROAD NON LOCKING PLATE
4.5MM 12 holes SINGLE PIECE PACK
617 OI 50 k DCP BROAD NON LOCKING PLATE
4.5MM 13 holes SINGLE PIECE PACK
618 OI 50 l DCP BROAD NON LOCKING PLATE
4.5MM 14 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
272 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
619 OI 50 m DCP BROAD NON LOCKING PLATE
4.5MM 15 holes SINGLE PIECE PACK
620 OI 50 n DCP BROAD NON LOCKING PLATE
4.5MM 16 HOLES SINGLE PIECE PACK
621 OI 50 o DCP BROAD NON LOCKING PLATE
4.5MM 17 holes SINGLE PIECE PACK
622 OI 50 p DCP BROAD NON LOCKING PLATE
4.5MM 18 HOLES SINGLE PIECE PACK
623 OI 51 aL
4.5
DISTAL LATERAL FEMUR LOCKING PLATE 4.5MM LEFT/5.0MM
LOCKING SCREW 5 holes SINGLE PIECE PACK
625 OI 51 cL
4.5
DISTAL LATERAL FEMUR LOCKING PLATE 4.5MM LEFT/5.0MM
LOCKING SCREW 7 holes SINGLE PIECE PACK
627 OI 51 eL
4.5
DISTAL LATERAL FEMUR LOCKING PLATE 4.5MM LEFT/5.0MM
LOCKING SCREW 9 holes SINGLE PIECE PACK
629 OI 51 gL
4.5
DISTAL LATERAL FEMUR LOCKING PLATE 4.5MM LEFT/5.0MM
LOCKING SCREW 11 holes SINGLE PIECE PACK
631 OI 51 iL
4.5
DISTAL LATERAL FEMUR LOCKING PLATE 4.5MM LEFT/5.0MM
LOCKING SCREW 13 holes SINGLE PIECE PACK
632 OI 51 a4.5R
DISTAL LATERAL FEMUR LOCKING PLATE 4.5MM RIGHT/5.0MM
LOCKING SCREW 5 holes SINGLE PIECE PACK
634 OI 51 c4.5R
DISTAL LATERAL FEMUR LOCKING PLATE 4.5MM RIGHT/5.0MM
LOCKING SCREW 7 holes SINGLE PIECE PACK
636 OI 51 e4.5R
DISTAL LATERAL FEMUR LOCKING PLATE 4.5MM RIGHT/5.0MM
LOCKING SCREW 9 holes SINGLE PIECE PACK
638 OI 51 g4.5R
DISTAL LATERAL FEMUR LOCKING PLATE 4.5MM RIGHT/5.0MM
LOCKING SCREW 11 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
273 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
640 OI 51 i4.5R
DISTAL LATERAL FEMUR LOCKING PLATE 4.5MM RIGHT/5.0MM
LOCKING SCREW 13 holes SINGLE PIECE PACK
TIBIAL PLATES
659 OI 60 aL PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 LEFT
5 holes SINGLE PIECE PACK
660 OI 60 bL PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 LEFT
6 holes SINGLE PIECE PACK
661 OI 60 cL PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 LEFT
7 holes SINGLE PIECE PACK
662 OI 60 dL PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 LEFT
8 holes SINGLE PIECE PACK
663 OI 60 eL PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 LEFT
9 holes SINGLE PIECE PACK
664 OI 60 fL PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 LEFT
10 holes SINGLE PIECE PACK
665 OI 60 gL PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 LEFT
11 holes SINGLE PIECE PACK
666 OI 60 hL PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 LEFT
12 holes SINGLE PIECE PACK
667 OI 60 iL PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 LEFT
13 holes SINGLE PIECE PACK
668 OI 60 jL PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 LEFT
14 holes SINGLE PIECE PACK
671 OI 60 aR PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 RIGHT
5 holes SINGLE PIECE PACK
672 OI 60 bR PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 RIGHT
6 holes SINGLE PIECE PACK
673 OI 60 cR PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 RIGHT
7 holes SINGLE PIECE PACK
674 OI 60 dR PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 RIGHT
8 holes SINGLE PIECE PACK
675 OI 60 eR PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 RIGHT
9 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
274 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
676 OI 60 fR PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 RIGHT
10 holes SINGLE PIECE PACK
677 OI 60 gR PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 RIGHT
11 holes SINGLE PIECE PACK
678 OI 60 hR PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 RIGHT
12 holes SINGLE PIECE PACK
679 OI 60 iR PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 RIGHT
13 holes SINGLE PIECE PACK
680 OI 60 jR PROXIMAL LATERAL TIBIAL LOCKING PLATE 3.5 RIGHT
14 holes SINGLE PIECE PACK
683 OI 61 a4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE 4.5 LEFT
5 holes SINGLE PIECE PACK
684 OI 61 b4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE 4.5 LEFT
6 holes SINGLE PIECE PACK
685 OI 61 c4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE 4.5 LEFT
7 holes SINGLE PIECE PACK
686 OI 61
d4.5L
PROXIMAL LATERAL TIBIAL NON
LOCKING PLATE 4.5 LEFT 8 holes SINGLE PIECE PACK
687 OI 61 e4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE 4.5 LEFT
9 holes SINGLE PIECE PACK
688 OI 61 f4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE 4.5 LEFT
10 holes SINGLE PIECE PACK
689 OI 61 g4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE 4.5 LEFT
11 holes SINGLE PIECE PACK
690 OI 61 h4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE 4.5 LEFT
12 holes SINGLE PIECE PACK
691 OI 61 i4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE 4.5 LEFT
13 holes SINGLE PIECE PACK
692 OI 61 j4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE 4.5 LEFT
14 holes SINGLE PIECE PACK
695 OI 61 a
4.5R PROXIMAL LATERAL TIBIAL NON
LOCKING PLATE 4.5 RIGHT 5 holes SINGLE PIECE PACK
696 OI 61 b
4.5R PROXIMAL LATERAL TIBIAL NON
LOCKING PLATE 4.5 RIGHT 6 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
275 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
697 OI 61 c 4.5R
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE 4.5 RIGHT
7 holes SINGLE PIECE PACK
698 OI 61 d
4.5R PROXIMAL LATERAL TIBIAL NON
LOCKING PLATE 4.5 RIGHT 8 holes SINGLE PIECE PACK
699 OI 61 e
4.5R PROXIMAL LATERAL TIBIAL NON
LOCKING PLATE 4.5 RIGHT 9 holes SINGLE PIECE PACK
700 OI 61 f 4.5R
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE 4.5 RIGHT
10 holes SINGLE PIECE PACK
701 OI 61 g
4.5R PROXIMAL LATERAL TIBIAL NON
LOCKING PLATE 4.5 RIGHT 11 holes SINGLE PIECE PACK
702 OI 61 h
4.5R PROXIMAL LATERAL TIBIAL NON
LOCKING PLATE 4.5 RIGHT 12 holes SINGLE PIECE PACK
703 OI 61 I 4.5R
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE 4.5 RIGHT
13 holes SINGLE PIECE PACK
704 OI 61 j 4.5R
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE 4.5 RIGHT
14 holes SINGLE PIECE PACK
707 OI 61 a5.0L
PROXIMAL LATERAL TIBIAL LOCKING PLATE 4.5MM
LEFT/5.0MM LOCKING SCREW 5 holes SINGLE PIECE PACK
709 OI 61 c5.0L
PROXIMAL LATERAL TIBIAL LOCKING PLATE 4.5MM
LEFT/5.0MM LOCKING SCREW 7 holes SINGLE PIECE PACK
711 OI 61 e5.0L
PROXIMAL LATERAL TIBIAL LOCKING PLATE 4.5MM
LEFT/5.0MM LOCKING SCREW 9 holes SINGLE PIECE PACK
713 OI 61 g5.0L
PROXIMAL LATERAL TIBIAL LOCKING PLATE 4.5MM
LEFT/5.0MM LOCKING SCREW 11 holes SINGLE PIECE PACK
715 OI 61 i5.0L
PROXIMAL LATERAL TIBIAL LOCKING PLATE 4.5MM
LEFT/5.0MM LOCKING SCREW 13 holes SINGLE PIECE PACK
719 OI 61 a5.0R
PROXIMAL LATERAL TIBIAL LOCKING PLATE 4.5MM
RIGHT/5.0MM LOCKING SCREW 5 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
276 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
721 OI 61 c5.0R
PROXIMAL LATERAL TIBIAL LOCKING PLATE 4.5MM
RIGHT/5.0MM LOCKING SCREW 7 holes SINGLE PIECE PACK
723 OI 61 e5.0R
PROXIMAL LATERAL TIBIAL LOCKING PLATE 4.5MM
RIGHT/5.0MM LOCKING SCREW 9 holes SINGLE PIECE PACK
725 OI 61 g5.0R
PROXIMAL LATERAL TIBIAL LOCKING PLATE 4.5MM
RIGHT/5.0MM LOCKING SCREW 11 holes SINGLE PIECE PACK
727 OI 61 i5.0R
PROXIMAL LATERAL TIBIAL LOCKING PLATE 4.5MM
RIGHT/5.0MM LOCKING SCREW 13 holes SINGLE PIECE PACK
731 OI 62 aL PROXIMAL LATERAL TIBIAL PLATE
T-SHAPED 3.5MM LEFT 4 holes SINGLE PIECE PACK
732 OI 62 bL PROXIMAL LATERAL TIBIAL PLATE
T-SHAPED 3.5MM LEFT 6 holes SINGLE PIECE PACK
734 OI 62 dL PROXIMAL LATERAL TIBIAL PLATE
T-SHAPED 3.5MM LEFT 8 holes SINGLE PIECE PACK
736 OI 62 fL PROXIMAL LATERAL TIBIAL PLATE
T-SHAPED 3.5MM LEFT 10 holes SINGLE PIECE PACK
738 OI 62 hL PROXIMAL LATERAL TIBIAL PLATE
T-SHAPED 3.5MM LEFT 12 holes SINGLE PIECE PACK
740 OI 62 jL PROXIMAL LATERAL TIBIAL PLATE
T-SHAPED 3.5MM LEFT 14 holes SINGLE PIECE PACK
731 OI 62 aL PROXIMAL LATERAL TIBIAL PLATE
T-SHAPED 3.5MM RIGHT 4 holes SINGLE PIECE PACK
732 OI 62 bL PROXIMAL LATERAL TIBIAL PLATE
T-SHAPED 3.5MM RIGHT 6 holes SINGLE PIECE PACK
734 OI 62 dL PROXIMAL LATERAL TIBIAL PLATE
T-SHAPED 3.5MM RIGHT 8 holes SINGLE PIECE PACK
736 OI 62 fL PROXIMAL LATERAL TIBIAL PLATE
T-SHAPED 3.5MM RIGHT 10 holes SINGLE PIECE PACK
738 OI 62 hL PROXIMAL LATERAL TIBIAL PLATE
T-SHAPED 3.5MM RIGHT 12 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
277 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
740 OI 62 jL PROXIMAL LATERAL TIBIAL PLATE
T-SHAPED 3.5MM RIGHT 14 holes SINGLE PIECE PACK
755 OI 63 a4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE T-SHAPED 4.5MM
LEFT 3 holes SINGLE PIECE PACK
756 OI 63 b4.5L
PROXIMAL LATERAL TIBIAL NON
LOCKING PLATE T-SHAPED 4.5MM LEFT
4 holes SINGLE PIECE PACK
757 OI 63 c4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE T-SHAPED 4.5MM
LEFT 5 holes SINGLE PIECE PACK
758 OI 63 d4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE T-SHAPED 4.5MM
LEFT 6 holes SINGLE PIECE PACK
759 OI 63 e4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE T-SHAPED 4.5MM
LEFT 7 holes SINGLE PIECE PACK
760 OI 63 f4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE T-SHAPED 4.5MM
LEFT 8 holes SINGLE PIECE PACK
761 OI 63 g4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE T-SHAPED 4.5MM
LEFT 9 holes SINGLE PIECE PACK
762 OI 63 h4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE T-SHAPED 4.5MM
LEFT 10 holes SINGLE PIECE PACK
763 OI 63 i4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE T-SHAPED 4.5MM
LEFT 11 holes SINGLE PIECE PACK
764 OI 63 j4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE T-SHAPED 4.5MM
LEFT 12 holes SINGLE PIECE PACK
765 OI 63 k4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE T-SHAPED 4.5MM
LEFT 13 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
278 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
766 OI 63 l4.5L
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE T-SHAPED 4.5MM
LEFT 14 holes SINGLE PIECE PACK
769 OI 63 a4.5R
PROXIMAL LATERAL TIBIAL NON LOCKING PLATE T-SHAPED 4.5MM
RIGHT 3 holes SINGLE PIECE PACK
770 OI 63 b4.5R
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM RIGHT
4 holes SINGLE PIECE PACK
771 OI 63 c4.5R
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM RIGHT
5 holes SINGLE PIECE PACK
772 OI 63 d4.5R
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM RIGHT
6 holes SINGLE PIECE PACK
773 OI 63 e4.5R
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM RIGHT
7 holes SINGLE PIECE PACK
774 OI 63 f4.5R
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM RIGHT
8 holes SINGLE PIECE PACK
775 OI 63 g4.5R
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM RIGHT
9 holes SINGLE PIECE PACK
776 OI 63 h4.5R
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM RIGHT
10 holes SINGLE PIECE PACK
777 OI 63 i4.5R
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM RIGHT
11 holes SINGLE PIECE PACK
778 OI 63 j4.5R
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM RIGHT
12 holes SINGLE PIECE PACK
779 OI 63 k4.5R
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM RIGHT
13 holes SINGLE PIECE PACK
780 OI 63 l4.5R
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM RIGHT
14 holes SINGLE PIECE PACK
783 OI 63 a5.0L
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM/ 5.0MM LOCKING
SCREW LEFT 3 holes SINGLE PIECE PACK
785 OI 63 c5.0L
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM/ 5.0MM LOCKING
SCREW LEFT 5 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
279 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
787 OI 63 e5.0L
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM/ 5.0MM LOCKING
SCREW LEFT 7 holes SINGLE PIECE PACK
789 OI 63 g5.0L
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM/ 5.0MM LOCKING
SCREW LEFT 9 holes SINGLE PIECE PACK
791 OI 63 i5.0L
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM/ 5.0MM LOCKING
SCREW LEFT 11 holes SINGLE PIECE PACK
793 OI 63 k5.0L
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM/ 5.0MM LOCKING
SCREW LEFT 13 holes SINGLE PIECE PACK
797 OI 63 a5.0R
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM/ 5.0MM LOCKING
SCREW RIGHT 3 holes SINGLE PIECE PACK
799 OI 63 c5.0R
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM/ 5.0MM LOCKING
SCREW RIGHT 5 holes SINGLE PIECE PACK
801 OI 63 e5.0R
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM/ 5.0MM LOCKING
SCREW RIGHT 7 holes SINGLE PIECE PACK
803 OI 63 g5.0R
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM/ 5.0MM LOCKING
SCREW RIGHT 9 holes SINGLE PIECE PACK
805 OI 63 i5.0R
PROXIMAL LATERAL TIBIAL PLATE T-SHAPED 4.5MM/ 5.0MM LOCKING
SCREW RIGHT 11 holes SINGLE PIECE PACK
807 OI 63 k5.0R
PROXIMAL LATERAL TIBIAL PLATE
T-SHAPED 4.5MM/ 5.0MM LOCKING SCREW RIGHT
13 holes SINGLE PIECE PACK
811 OI 64 aL L-BUTTRESS PLATE 4.5LEFT 3 holes SINGLE PIECE PACK
812 OI 64 bL L-BUTTRESS PLATE 4.5LEFT 4 holes SINGLE PIECE PACK
813 OI 64 cL L-BUTTRESS PLATE 4.5LEFT 5 holes SINGLE PIECE PACK
814 OI 64 dL L-BUTTRESS PLATE 4.5LEFT 6 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
280 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
815 OI 64 eL L-BUTTRESS PLATE 4.5LEFT 7 holes SINGLE PIECE PACK
816 OI 64 fL L-BUTTRESS PLATE 4.5LEFT 8 holes SINGLE PIECE PACK
817 OI 64 gL L-BUTTRESS PLATE 4.5LEFT 9 holes SINGLE PIECE PACK
818 OI 64 aR L-BUTTRESS PLATE 4.5RIGHT 3 holes SINGLE PIECE PACK
819 OI 64 bR L-BUTTRESS PLATE 4.5RIGHT 4 holes SINGLE PIECE PACK
820 OI 64 cR L-BUTTRESS PLATE 4.5RIGHT 5 holes SINGLE PIECE PACK
821 OI 64 dR L-BUTTRESS PLATE 4.5RIGHT 6 holes SINGLE PIECE PACK
822 OI 64 eR L-BUTTRESS PLATE 4.5RIGHT 7 holes SINGLE PIECE PACK
823 OI 64 fR L-BUTTRESS PLATE 4.5RIGHT 8 holes SINGLE PIECE PACK
824 OI 64 gR L-BUTTRESS PLATE 4.5RIGHT 9 holes SINGLE PIECE PACK
825 OI 65 aL L-BUTTRESS LOCKING PLATE 5.0
LEFT 3 holes SINGLE PIECE PACK
826 OI 65 bL L-BUTTRESS LOCKING PLATE 5.0
LEFT 4 holes SINGLE PIECE PACK
827 OI 65 cL L-BUTTRESS LOCKING PLATE 5.0
LEFT 5 holes SINGLE PIECE PACK
828 OI 65 dL L-BUTTRESS LOCKING PLATE 5.0
LEFT 6 holes SINGLE PIECE PACK
829 OI 65 eL L-BUTTRESS LOCKING PLATE 5.0
LEFT 7 holes SINGLE PIECE PACK
830 OI 65 fL L-BUTTRESS LOCKING PLATE 5.0
LEFT 8 holes SINGLE PIECE PACK
831 OI 65 gL L-BUTTRESS LOCKING PLATE 5.0
LEFT 9 holes SINGLE PIECE PACK
832 OI 65 hL L-BUTTRESS LOCKING PLATE 5.0
LEFT 10 HOLES SINGLE PIECE PACK
833 OI 65 aR L-BUTTRESS LOCKING PLATE 5.0
RIGHT 3 holes SINGLE PIECE PACK
834 OI 65 bR L-BUTTRESS LOCKING PLATE 5.0
RIGHT 4 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
281 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
835 OI 65 cR L-BUTTRESS LOCKING PLATE 5.0
RIGHT 5 holes SINGLE PIECE PACK
836 OI 65 dR L-BUTTRESS LOCKING PLATE 5.0
RIGHT 6 holes SINGLE PIECE PACK
837 OI 65 eR L-BUTTRESS LOCKING PLATE 5.0
RIGHT 7 holes SINGLE PIECE PACK
838 OI 65 fR L-BUTTRESS LOCKING PLATE 5.0
RIGHT 8 holes SINGLE PIECE PACK
839 OI 65 gR L-BUTTRESS LOCKING PLATE 5.0
RIGHT 9 holes SINGLE PIECE PACK
840 OI 65 hR L-BUTTRESS LOCKING PLATE 5.0
RIGHT 10 HOLES SINGLE PIECE PACK
841 OI 66 a T-BUTTRESS LOCKING PLATE 4.5 3 holes SINGLE PIECE PACK
842 OI 66 b T-BUTTRESS LOCKING PLATE 4.5 4 holes SINGLE PIECE PACK
843 OI 66 c T-BUTTRESS LOCKING PLATE 4.5 5 holes SINGLE PIECE PACK
844 OI 66 d T-BUTTRESS LOCKING PLATE 4.5 6 holes SINGLE PIECE PACK
845 OI 66 e T-BUTTRESS LOCKING PLATE 4.5 7 holes SINGLE PIECE PACK
846 OI 66 f T-BUTTRESS LOCKING PLATE 4.5 8 holes SINGLE PIECE PACK
847 OI 66 g T-BUTTRESS LOCKING PLATE 4.5 9 holes SINGLE PIECE PACK
848 OI 66 h T-BUTTRESS LOCKING PLATE 4.5 10 HOLES SINGLE PIECE PACK
849 OI 67 a T-BUTTRESS LOCKING PLATE 5.0 3 holes SINGLE PIECE PACK
850 OI 67 b T-BUTTRESS LOCKING PLATE 5.0 4 holes SINGLE PIECE PACK
851 OI 67 c T-BUTTRESS LOCKING PLATE 5.0 5 holes SINGLE PIECE PACK
852 OI 67 d T-BUTTRESS LOCKING PLATE 5.0 6 holes SINGLE PIECE PACK
853 OI 67 e T-BUTTRESS LOCKING PLATE 5.0 7 holes SINGLE PIECE PACK
854 OI 67 f T-BUTTRESS LOCKING PLATE 5.0 8 holes SINGLE PIECE PACK
855 OI 67 g T-BUTTRESS LOCKING PLATE 5.0 9 holes SINGLE PIECE PACK
856 OI 67 h T-BUTTRESS LOCKING PLATE 5.0 10 HOLES SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
282 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
857 OI 68 aL DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM LEFT 3 holes SINGLE PIECE PACK
858 OI 68 bL DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM LEFT 4 holes SINGLE PIECE PACK
859 OI 68 cL DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM LEFT 5 holes SINGLE PIECE PACK
860 OI 68 dL DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM LEFT 6 holes SINGLE PIECE PACK
861 OI 68 eL DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM LEFT 7 holes SINGLE PIECE PACK
862 OI 68 fL DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM LEFT 8 holes SINGLE PIECE PACK
863 OI 68 gL DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM LEFT 9 holes SINGLE PIECE PACK
864 OI 68 hL DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM LEFT 10 holes SINGLE PIECE PACK
865 OI 68 iL DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM LEFT 11 holes SINGLE PIECE PACK
866 OI 68 jL DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM LEFT 12 holes SINGLE PIECE PACK
869 OI 68 aR DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM RIGHT 3 holes SINGLE PIECE PACK
870 OI 68 bR DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM RIGHT 4 holes SINGLE PIECE PACK
871 OI 68 cR DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM RIGHT 5 holes SINGLE PIECE PACK
872 OI 68 dR DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM RIGHT 6 holes SINGLE PIECE PACK
873 OI 68 eR DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM RIGHT 7 holes SINGLE PIECE PACK
874 OI 68 fR DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM RIGHT 8 holes SINGLE PIECE PACK
875 OI 68 gR DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM RIGHT 9 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
283 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
876 OI 68 hR DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM RIGHT 10 holes SINGLE PIECE PACK
877 OI 68 iR DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM RIGHT 11 holes SINGLE PIECE PACK
878 OI 68 jR DISTAL MEDIAL TIBIA LOCKING
PLATE 3.5MM RIGHT 12 holes SINGLE PIECE PACK
881 OI 69 a FIBULA METAPHYSIAL PLATE
3.5MM 3 holes SINGLE PIECE PACK
882 OI 69 b FIBULA METAPHYSIAL PLATE
3.5MM 4 holes SINGLE PIECE PACK
883 OI 69 c FIBULA METAPHYSIAL PLATE
3.5MM 5 holes SINGLE PIECE PACK
884 OI 69 d FIBULA METAPHYSIAL PLATE
3.5MM 6 holes SINGLE PIECE PACK
885 OI 69 e FIBULA METAPHYSIAL PLATE
3.5MM 7 holes SINGLE PIECE PACK
886 OI 69 f FIBULA METAPHYSIAL PLATE
3.5MM 8 holes SINGLE PIECE PACK
887 OI 69 g FIBULA METAPHYSIAL PLATE
3.5MM 9 holes SINGLE PIECE PACK
888 OI 69 h FIBULA METAPHYSIAL PLATE
3.5MM 10 holes SINGLE PIECE PACK
889 OI 69 i FIBULA METAPHYSIAL PLATE
3.5MM 11 holes SINGLE PIECE PACK
890 OI 69 j FIBULA METAPHYSIAL PLATE
3.5MM 12 holes SINGLE PIECE PACK
891 OI 69 k FIBULA METAPHYSIAL PLATE
3.5MM 13 holes SINGLE PIECE PACK
892 OI 69 l FIBULA METAPHYSIAL PLATE
3.5MM 14 holes SINGLE PIECE PACK
893 OI 69 m FIBULA METAPHYSIAL PLATE
3.5MM 15 holes SINGLE PIECE PACK
894 OI 69 n FIBULA METAPHYSIAL PLATE
3.5MM 16 HOLES SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
284 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
895 OI 69 o FIBULA METAPHYSIAL PLATE
3.5MM 17 HOLES SINGLE PIECE PACK
896 OI 69 p FIBULA METAPHYSIAL PLATE
3.5MM 18 HOLES SINGLE PIECE PACK
897 OI 70 a CLOVER LEAF PLATE 3.5MM 3 holes SINGLE PIECE PACK
898 OI 70 b CLOVER LEAF PLATE 3.5MM 4 holes SINGLE PIECE PACK
899 OI 70 c CLOVER LEAF PLATE 3.5MM 5 holes SINGLE PIECE PACK
900 OI 70 d CLOVER LEAF PLATE 3.5MM 6 holes SINGLE PIECE PACK
901 OI 70 e CLOVER LEAF PLATE 3.5MM 7 holes SINGLE PIECE PACK
902 OI 70 f CLOVER LEAF PLATE 3.5MM 8 holes SINGLE PIECE PACK
903 OI 70 g CLOVER LEAF PLATE 3.5MM 9 holes SINGLE PIECE PACK
904 OI 70 h CLOVER LEAF PLATE 3.5MM 10 holes SINGLE PIECE PACK
905 OI 71 a SEMI TUBULAR PLATE 4.5MM 5 holes SINGLE PIECE PACK
906 OI 71 b SEMI TUBULAR PLATE 4.5MM 6 holes SINGLE PIECE PACK
907 OI 71 c SEMI TUBULAR PLATE 4.5MM 7 holes SINGLE PIECE PACK
908 OI 71 d SEMI TUBULAR PLATE 4.5MM 8 holes SINGLE PIECE PACK
909 OI 71 e SEMI TUBULAR PLATE 4.5MM 9 holes SINGLE PIECE PACK
910 OI 71 f SEMI TUBULAR PLATE 4.5MM 10 holes SINGLE PIECE PACK
911 OI 71 g SEMI TUBULAR PLATE 4.5MM 11 holes SINGLE PIECE PACK
912 OI 71 h SEMI TUBULAR PLATE 4.5MM 12 holes SINGLE PIECE PACK
HIP & KNEE OSTEOTOMY PLATES
913 OI 73 aL
MEDIAL PROXIMAL TIBIAL HEAD
OSTEOTOMY PLATE 4.5 MM T-SHAPED LEFT
4 HOLES SINGLE PIECE PACK
914 OI 73 aR MEDIAL PROXIMAL TIBIAL HEAD
OSTEOTOMY PLATE 4.5MM T-SHAPED RIGHT
4 HOLES SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
285 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
915 OI 73 bL MEDIAL PROXIMAL TIBIAL HEAD OSTEOTOMY PLATE 5.0 MM T-
SHAPED LEFT 4 HOLES SINGLE PIECE PACK
916 OI 73 bR MEDIAL PROXIMAL TIBIAL HEAD OSTEOTOMY PLATE 5.0 MM T-
SHAPED RIGHT 4 HOLES SINGLE PIECE PACK
917 OI 74 aL DISTAL MEDIAL FEMUR
OSTEOTOMY PLATE 4.5 MM LEFT 4 HOLES SINGLE PIECE PACK
918 OI 74 aR DISTAL MEDIAL FEMUR
OSTEOTOMY PLATE 4.5MM RIGHT 4 HOLES SINGLE PIECE PACK
919 OI 74 bL DISTAL MEDIAL FEMUR
OSTEOTOMY PLATE 5.0 MM LEFT 4 HOLES SINGLE PIECE PACK
920 OI 74 bR DISTAL MEDIAL FEMUR
OSTEOTOMY PLATE 5.0 MM RIGHT 4 HOLES SINGLE PIECE PACK
921 OI 75 a3.5L
DISTAL LATERAL FEMUR OSTEOTOMY PLATE 3.5 MM LEFT
4 HOLES SINGLE PIECE PACK
922 OI 75 a3.5R
DISTAL LATERAL FEMUR OSTEOTOMY PLATE 3.5 MM RIGHT
4 HOLES SINGLE PIECE PACK
923 OI
75b4.5L DISTAL LATERAL FEMUR
OSTEOTOMY PLATE 4.5 MM LEFT 4 HOLES SINGLE PIECE PACK
924 OI 75 b4.5R
DISTAL LATERAL FEMUR OSTEOTOMY PLATE 4.5 MM RIGHT
4 HOLES SINGLE PIECE PACK
925 OI
75c5.0L DISTAL LATERAL FEMUR
OSTEOTOMY PLATE 5.0 MM LEFT 4 HOLES SINGLE PIECE PACK
926 OI 75 c5.0R
DISTAL LATERAL FEMUR OSTEOTOMY PLATE 5.0 MM RIGHT
4 HOLES SINGLE PIECE PACK
927 OI 76 aL PROXIMAL LATERAL TIBIAL
OSTEOTOMY PLATE 4.5 MM LEFT 3 HOLES SINGLE PIECE PACK
928 OI 76 aR PROXIMAL LATERAL TIBIAL
OSTEOTOMY PLATE 4.5 MM RIGHT 3 HOLES SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
286 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
929 OI 76 bR PROXIMAL LATERAL TIBIAL
OSTEOTOMY PLATE 5.0 MM LEFT 3 HOLES SINGLE PIECE PACK
930 OI 76 bR PROXIMAL LATERAL TIBIAL
OSTEOTOMY PLATE 5.0 MM RIGHT 3 HOLES SINGLE PIECE PACK
PELVIC PLATES
931 OI 77 a RECONSTRUCTION PLATE-
STRAIGHT 3.5MM 5 holes SINGLE PIECE PACK
932 OI 77 b RECONSTRUCTION PLATE-
STRAIGHT 3.5MM 6 holes SINGLE PIECE PACK
933 OI 77 c RECONSTRUCTION PLATE-
STRAIGHT 3.5MM 7 holes SINGLE PIECE PACK
934 OI 77 d RECONSTRUCTION PLATE-
STRAIGHT 3.5MM 8 holes SINGLE PIECE PACK
935 OI 77 e RECONSTRUCTION PLATE-
STRAIGHT 3.5MM 9 holes SINGLE PIECE PACK
936 OI 77 f RECONSTRUCTION PLATE-
STRAIGHT 3.5MM 10 holes SINGLE PIECE PACK
937 OI 77 g RECONSTRUCTION PLATE-
STRAIGHT 3.5MM 11 holes SINGLE PIECE PACK
938 OI 77 h RECONSTRUCTION PLATE-
STRAIGHT 3.5MM 12 holes SINGLE PIECE PACK
939 OI 77 i RECONSTRUCTION PLATE-
STRAIGHT 3.5MM 13 holes SINGLE PIECE PACK
940 OI 77 j RECONSTRUCTION PLATE-
STRAIGHT 3.5MM 14 holes SINGLE PIECE PACK
941 OI 77 k RECONSTRUCTION PLATE-
STRAIGHT 3.5MM 15 holes SINGLE PIECE PACK
942 OI 77 l RECONSTRUCTION PLATE-
STRAIGHT 3.5MM 16 HOLES SINGLE PIECE PACK
943 OI 77 m RECONSTRUCTION PLATE-
STRAIGHT 3.5MM 17 HOLES SINGLE PIECE PACK
944 OI 77 n RECONSTRUCTION PLATE-
STRAIGHT 3.5MM 18 HOLES SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
287 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
945 OI 77 o RECONSTRUCTION PLATE-
STRAIGHT 3.5MM 19 HOLES SINGLE PIECE PACK
946 OI 77 p RECONSTRUCTION PLATE-
STRAIGHT 3.5MM 20 HOLES SINGLE PIECE PACK
947 OI 78 a RECONSTRUCTION PLATE-
STRAIGHT 4.5MM 3 holes SINGLE PIECE PACK
948 OI 78 b RECONSTRUCTION PLATE-
STRAIGHT 4.5MM 4 holes SINGLE PIECE PACK
949 OI 78 c RECONSTRUCTION PLATE-
STRAIGHT 4.5MM 5 holes SINGLE PIECE PACK
950 OI 78 d RECONSTRUCTION PLATE-
STRAIGHT 4.5MM 6 holes SINGLE PIECE PACK
951 OI 78 e RECONSTRUCTION PLATE-
STRAIGHT 4.5MM 7 holes SINGLE PIECE PACK
952 OI 78 f RECONSTRUCTION PLATE-
STRAIGHT 4.5MM 8 holes SINGLE PIECE PACK
953 OI 78 g RECONSTRUCTION PLATE-
STRAIGHT 4.5MM 9 holes SINGLE PIECE PACK
954 OI 78 h RECONSTRUCTION PLATE-
STRAIGHT 4.5MM 10 holes SINGLE PIECE PACK
955 OI 78 i RECONSTRUCTION PLATE-
STRAIGHT 4.5MM 11 holes SINGLE PIECE PACK
956 OI 78 j RECONSTRUCTION PLATE-
STRAIGHT 4.5MM 12 holes SINGLE PIECE PACK
957 OI 78 k RECONSTRUCTION PLATE-
STRAIGHT 4.5MM 13 holes SINGLE PIECE PACK
958 OI 78 l RECONSTRUCTION PLATE-
STRAIGHT 4.5MM 14 holes SINGLE PIECE PACK
959 OI 78 m RECONSTRUCTION PLATE-
STRAIGHT 4.5MM 15 holes SINGLE PIECE PACK
960 OI 78 n RECONSTRUCTION PLATE-
STRAIGHT 4.5MM 16 HOLES SINGLE PIECE PACK
961 OI 78 o RECONSTRUCTION PLATE-
STRAIGHT 4.5MM 17 HOLES SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
288 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
962 OI 78 p RECONSTRUCTION PLATE-
STRAIGHT 4.5MM 18 HOLES SINGLE PIECE PACK
963 OI 79 a RECONSTRUCTION PLATE- CURVED
3.5MM 5 holes SINGLE PIECE PACK
964 OI 79 b RECONSTRUCTION PLATE- CURVED
3.5MM 6 holes SINGLE PIECE PACK
965 OI 79 c RECONSTRUCTION PLATE- CURVED
3.5MM 7 holes SINGLE PIECE PACK
966 OI 79 d RECONSTRUCTION PLATE- CURVED
3.5MM 8 holes SINGLE PIECE PACK
967 OI 79 e RECONSTRUCTION PLATE- CURVED
3.5MM 9 holes SINGLE PIECE PACK
968 OI 79 f RECONSTRUCTION PLATE- CURVED
3.5MM 10 holes SINGLE PIECE PACK
969 OI 79 g RECONSTRUCTION PLATE- CURVED
3.5MM 11 holes SINGLE PIECE PACK
970 OI 79 h RECONSTRUCTION PLATE- CURVED
3.5MM 12 holes SINGLE PIECE PACK
971 OI 79 i RECONSTRUCTION PLATE- CURVED
3.5MM 13 holes SINGLE PIECE PACK
972 OI 79 j RECONSTRUCTION PLATE- CURVED
3.5MM 14 holes SINGLE PIECE PACK
973 OI 79 k RECONSTRUCTION PLATE- CURVED
3.5MM 15 holes SINGLE PIECE PACK
974 OI 79 l RECONSTRUCTION PLATE- CURVED
3.5MM 16 HOLES SINGLE PIECE PACK
975 OI 79 m RECONSTRUCTION PLATE- CURVED
3.5MM 17 HOLES SINGLE PIECE PACK
976 OI 79 n RECONSTRUCTION PLATE- CURVED
3.5MM 18 HOLES SINGLE PIECE PACK
977 OI 80 a LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 3.5 MM
5 holes SINGLE PIECE PACK
978 OI 80 b LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 3.5 MM
6 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
289 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
979 OI 80 c LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 3.5 MM
7 holes SINGLE PIECE PACK
980 OI 80 d LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 3.5 MM
8 holes SINGLE PIECE PACK
981 OI 80 e LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 3.5 MM
9 holes SINGLE PIECE PACK
982 OI 80 f LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 3.5 MM
10 holes SINGLE PIECE PACK
983 OI 80 g LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 3.5 MM
11 holes SINGLE PIECE PACK
984 OI 80 h LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 3.5 MM
12 holes SINGLE PIECE PACK
985 OI 80 i LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 3.5 MM
13 holes SINGLE PIECE PACK
986 OI 80 j LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 3.5 MM
14 holes SINGLE PIECE PACK
987 OI 80 k LOCKNIG RECONSTRUCTION
PLATE- STRAIGHT 3.5 MM 15 holes SINGLE PIECE PACK
988 OI 80 l LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 3.5 MM
16 HOLES SINGLE PIECE PACK
989 OI 80 m LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 3.5 MM
17 HOLES SINGLE PIECE PACK
990 OI 80 n LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 3.5 MM
18 HOLES SINGLE PIECE PACK
991 OI 80 o LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 3.5 MM
19 HOLES SINGLE PIECE PACK
992 OI 80 p LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 3.5 MM
20 HOLES SINGLE PIECE PACK
993 OI 81 a LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 4.5 MM
3 holes SINGLE PIECE PACK
994 OI 81 b LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 4.5 MM
4 holes SINGLE PIECE PACK
995 OI 81 c LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 4.5 MM
5 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
290 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
996 OI 81 d LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 4.5 MM
6 holes SINGLE PIECE PACK
997 OI 81 e LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 4.5 MM
7 holes SINGLE PIECE PACK
998 OI 81 f LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 4.5 MM
8 holes SINGLE PIECE PACK
999 OI 81 g LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 4.5 MM
9 holes SINGLE PIECE PACK
1000 OI 81 h LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 4.5 MM
10 holes SINGLE PIECE PACK
1001 OI 81 i LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 4.5 MM
11 holes SINGLE PIECE PACK
1002 OI 81 j LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 4.5 MM
12 holes SINGLE PIECE PACK
1003 OI 81 k LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 4.5 MM
13 holes SINGLE PIECE PACK
1004 OI 81 l LOCKNIG RECONSTRUCTION
PLATE- STRAIGHT 4.5 MM 14 holes SINGLE PIECE PACK
1005 OI 81 m LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 4.5 MM
15 holes SINGLE PIECE PACK
1006 OI 81 n LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 4.5 MM
16 HOLES SINGLE PIECE PACK
1007 OI 81 o LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 4.5 MM
17 HOLES SINGLE PIECE PACK
1008 OI 81 p LOCKNIG RECONSTRUCTION PLATE- STRAIGHT 4.5 MM
18 HOLES SINGLE PIECE PACK
1009 OI 82 a LOCKNIG RECONSTRUCTION
PLATE- CURVED 3.5 MM 3 holes SINGLE PIECE PACK
1010 OI 82 b LOCKNIG RECONSTRUCTION
PLATE- CURVED 3.5 MM 4 holes SINGLE PIECE PACK
1011 OI 82 c LOCKNIG RECONSTRUCTION
PLATE- CURVED 3.5 MM 5 holes SINGLE PIECE PACK
1012 OI 82 d LOCKNIG RECONSTRUCTION
PLATE- CURVED 3.5 MM 6 holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
291 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
1013 OI 82 e LOCKNIG RECONSTRUCTION
PLATE- CURVED 3.5 MM 7 holes SINGLE PIECE PACK
1014 OI 82 f LOCKNIG RECONSTRUCTION
PLATE- CURVED 3.5 MM 8 holes SINGLE PIECE PACK
1015 OI 82 g LOCKNIG RECONSTRUCTION
PLATE- CURVED 3.5 MM 9 holes SINGLE PIECE PACK
1016 OI 82 h LOCKNIG RECONSTRUCTION
PLATE- CURVED 3.5 MM 10 holes SINGLE PIECE PACK
1017 OI 82 i LOCKNIG RECONSTRUCTION
PLATE- CURVED 3.5 MM 11 holes SINGLE PIECE PACK
1018 OI 82 j LOCKNIG RECONSTRUCTION
PLATE- CURVED 3.5 MM 12 holes SINGLE PIECE PACK
1019 OI 82 k LOCKNIG RECONSTRUCTION
PLATE- CURVED 3.5 MM 13 holes SINGLE PIECE PACK
1020 OI 82 l LOCKNIG RECONSTRUCTION
PLATE- CURVED 3.5 MM 14 holes SINGLE PIECE PACK
1021 OI 82 m LOCKNIG RECONSTRUCTION
PLATE- CURVED 3.5 MM 15 holes SINGLE PIECE PACK
1022 OI 82n LOCKNIG RECONSTRUCTION
PLATE- CURVED 3.5 MM 16 HOLES SINGLE PIECE PACK
1023 OI 82 o LOCKNIG RECONSTRUCTION
PLATE- CURVED 3.5 MM 17 HOLES SINGLE PIECE PACK
1024 OI 82 p LOCKNIG RECONSTRUCTION
PLATE- CURVED 3.5 MM 18 HOLES SINGLE PIECE PACK
1025 OI 96 a D.H.S. LOCKING Plate 135* 4, Holes SINGLE PIECE PACK
1026 OI 96 b D.H.S. LOCKING Plate 135* 5 Holes SINGLE PIECE PACK
1027 OI 96 c D.H.S. LOCKING Plate 135* 6 Holes SINGLE PIECE PACK
1028 OI 96 d D.H.S. LOCKING Plate 135* 7 Holes SINGLE PIECE PACK
1029 OI 96 e D.H.S. LOCKING Plate 135* 8 Holes SINGLE PIECE PACK
1030 OI 96 f D.H.S. LOCKING Plate 135* 9Holes SINGLE PIECE PACK
1031 OI 97 a D.C.S. LOCKING Plate 95* 5 Holes SINGLE PIECE PACK
1032 OI 97 b D.C.S. LOCKING Plate 95* 6 Holes SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
292 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
1033 OI 97 c D.C.S. LOCKING Plate 95* 7 Holes SINGLE PIECE PACK
1034 OI 97 d D.C.S. LOCKING Plate 95* 8 Holes SINGLE PIECE PACK
1035 OI 97 e D.C.S. LOCKING Plate 95* 9 Holes SINGLE PIECE PACK
1036 OI 97 f D.C.S. LOCKING Plate 95* 10 Holes SINGLE PIECE PACK
Locking compression Screws: SINGLE PIECE PACK
1038 OI 92 a Lag Screw with Compression screw 55mm SINGLE PIECE PACK
1039 OI 92 b Lag Screw with Compression screw 60mm SINGLE PIECE PACK
1040 OI 92 c Lag Screw with Compression screw 65mm SINGLE PIECE PACK
1041 OI 92 d Lag Screw with Compression screw 70mm SINGLE PIECE PACK
1042 OI 92 e Lag Screw with Compression screw 75mm SINGLE PIECE PACK
1043 OI 92 f Lag Screw with Compression screw 80mm SINGLE PIECE PACK
1044 OI 92 g Lag Screw with Compression screw 85mm SINGLE PIECE PACK
1045 OI 92 h Lag Screw with Compression screw 90mm SINGLE PIECE PACK
1046 OI 92 i Lag Screw with Compression screw 95mm SINGLE PIECE PACK
1047 OI 92 j Lag Screw with Compression screw 100mm SINGLE PIECE PACK
1048 OI 92 k Lag Screw with Compression screw 105mm SINGLE PIECE PACK
1049 OI 92 l Lag Screw with Compression screw 110mm SINGLE PIECE PACK
CANNULATED SCREWS 4MM AND
7MM SINGLE PIECE PACK
1050 OI 104 a Cannulated Screw 7mm 45mm SINGLE PIECE PACK
1051 OI 104 b Cannulated Screw 7mm 50m SINGLE PIECE PACK
1052 OI 104 c Cannulated Screw 7mm 55mm SINGLE PIECE PACK
1053 OI 104 d Cannulated Screw 7mm 60mm SINGLE PIECE PACK
1054 OI 104 e Cannulated Screw 7mm 65mm SINGLE PIECE PACK
1055 OI 104 f Cannulated Screw 7mm 70mm SINGLE PIECE PACK
1056 OI 104g Cannulated Screw 7mm 75mm SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
293 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
1057 OI 104 h Cannulated Screw 7mm 80mm SINGLE PIECE PACK
1058 OI 104 i Cannulated Screw 7mm 85mm SINGLE PIECE PACK
1059 OI 104 j Cannulated Screw 7mm 90mm SINGLE PIECE PACK
1060 OI 104 k Cannulated Screw 7mm 95mm SINGLE PIECE PACK
1061 OI 104 l Cannulated Screw 7mm 100mm SINGLE PIECE PACK
1062 OI 104
m Cannulated Screw 7mm 105mm SINGLE PIECE PACK
1063 OI 104 n Cannulated Screw 7mm 110mm SINGLE PIECE PACK
1064 OI 105 a Cannulated Screw 4mm 35mm SINGLE PIECE PACK
1065 OI 105 b Cannulated Screw 4mm 40mm SINGLE PIECE PACK
1066 OI 105 c Cannulated Screw 4mm 45mm SINGLE PIECE PACK
1067 OI 105 d Cannulated Screw 4mm 50mm SINGLE PIECE PACK
1068 OI 105 e Cannulated Screw 4mm 55mm SINGLE PIECE PACK
1069 OI 105 f Cannulated Screw 4mm 60mm SINGLE PIECE PACK
1070 OI 105 g Cannulated Screw 4mm 65mm SINGLE PIECE PACK
1071 OI 105 h Cannulated Screw 4mm 70mm SINGLE PIECE PACK
SMALL SCREW
3.5MM/4.0MM/4.5MM/6.5MM SINGLE PIECE PACK
1072 OI 106 a Cortex Screw 3.5mm 10 MM SINGLE PIECE PACK
1073 OI 106b Cortex Screw 3.5mm 12 MM SINGLE PIECE PACK
1074 OI 106 c Cortex Screw 3.5mm 14 MM SINGLE PIECE PACK
1075 OI 106 d Cortex Screw 3.5mm 16 MM SINGLE PIECE PACK
1076 OI 106 e Cortex Screw 3.5mm 18 MM SINGLE PIECE PACK
1077 OI 106 f Cortex Screw 3.5mm 20 MM SINGLE PIECE PACK
1078 OI 106 g Cortex Screw 3.5mm 22 MM SINGLE PIECE PACK
1079 OI 106 h Cortex Screw 3.5mm 24 MM SINGLE PIECE PACK
1079 OI 106 i Cortex Screw 3.5mm 26 MM SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
294 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
1079 OI 106 j Cortex Screw 3.5mm 28 MM SINGLE PIECE PACK
1079 OI 106 k Cortex Screw 3.5mm 30 MM SINGLE PIECE PACK
1079 OI 106 l Cortex Screw 3.5mm 32 MM SINGLE PIECE PACK
1079 OI 106
m Cortex Screw 3.5mm 34 MM SINGLE PIECE PACK
1079 OI 106 n Cortex Screw 3.5mm 36 MM SINGLE PIECE PACK
1079 OI 106 o Cortex Screw 3.5mm 38 MM SINGLE PIECE PACK
1079 OI 106 p Cortex Screw 3.5mm 40 MM SINGLE PIECE PACK
1079 OI 106 q Cortex Screw 3.5mm 42 MM SINGLE PIECE PACK
1079 OI 106 r Cortex Screw 3.5mm 44 MM SINGLE PIECE PACK
1079 OI 106 s Cortex Screw 3.5mm 46 MM SINGLE PIECE PACK
1079 OI 106 t Cortex Screw 3.5mm 48 MM SINGLE PIECE PACK
1079 OI 106 u Cortex Screw 3.5mm 50 MM SINGLE PIECE PACK
1080 OI 107 a Cortex Screw 4.5mm 20 mm SINGLE PIECE PACK
1081 OI 107 b Cortex Screw 4.5mm 22 mm SINGLE PIECE PACK
1082 OI 107c Cortex Screw 4.5mm 24 mm SINGLE PIECE PACK
1083 OI 107 d Cortex Screw 4.5mm 26 mm SINGLE PIECE PACK
1084 OI 107 e Cortex Screw 4.5mm 28 mm SINGLE PIECE PACK
1085 OI 107 f Cortex Screw 4.5mm 30 mm SINGLE PIECE PACK
1086 OI 107 g Cortex Screw 4.5mm 32 mm SINGLE PIECE PACK
1087 OI 107 h Cortex Screw 4.5mm 34 mm SINGLE PIECE PACK
1087 OI 107 i Cortex Screw 4.5mm 36 mm SINGLE PIECE PACK
1081 OI 107 j Cortex Screw 4.5mm 38 mm SINGLE PIECE PACK
1082 OI 107 k Cortex Screw 4.5mm 40 mm SINGLE PIECE PACK
1083 OI 107 l Cortex Screw 4.5mm 42 mm SINGLE PIECE PACK
1084 OI 107
m Cortex Screw 4.5mm 44mm SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
295 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
1085 OI 107 n Cortex Screw 4.5mm 46mm SINGLE PIECE PACK
1086 OI 107 o Cortex Screw 4.5mm 48mm SINGLE PIECE PACK
1087 OI 107 p Cortex Screw 4.5mm 50mm SINGLE PIECE PACK
1081 OI 107q Cortex Screw 4.5mm 52 mm SINGLE PIECE PACK
1082 OI 107 r Cortex Screw 4.5mm 54 mm SINGLE PIECE PACK
1083 OI 107 s Cortex Screw 4.5mm 56 mm SINGLE PIECE PACK
1084 OI 107 t Cortex Screw 4.5mm 58 mm SINGLE PIECE PACK
1085 OI 107 u Cortex Screw 4.5mm 60mm SINGLE PIECE PACK
1086 OI 107 v Cortex Screw 4.5mm 62 mm SINGLE PIECE PACK
1087 OI 107
w Cortex Screw 4.5mm 64 mm SINGLE PIECE PACK
1081 OI 107 x Cortex Screw 4.5mm 66 mm SINGLE PIECE PACK
1081 OI 107 y Cortex Screw 4.5mm 68 mm SINGLE PIECE PACK
1082 OI 107z Cortex Screw 4.5mm 70 mm SINGLE PIECE PACK
1088 OI 108 a CANCELLOUS SCREW 3.5 MM 15MM SINGLE PIECE PACK
1089 OI 108b CANCELLOUS SCREW 3.5 MM 20 MM SINGLE PIECE PACK
1090 OI 108 c CANCELLOUS SCREW 3.5 MM 25MM SINGLE PIECE PACK
1091 OI 108 d CANCELLOUS SCREW 3.5 MM 30 MM SINGLE PIECE PACK
1092 OI 108 e CANCELLOUS SCREW 3.5 MM 35 MM SINGLE PIECE PACK
1093 OI 108 f CANCELLOUS SCREW 3.5 MM 40 MM SINGLE PIECE PACK
1094 OI 108 g CANCELLOUS SCREW 3.5 MM 45MM SINGLE PIECE PACK
1095 OI 108 h CANCELLOUS SCREW 3.5 MM 50MM SINGLE PIECE PACK
1096 OI 109 a CANCELLOUS SCREW 4.0 MM (FULL
THREAD) 15MM SINGLE PIECE PACK
1097 OI 109 b CANCELLOUS SCREW 4.0 MM (FULL
THREAD) 20 MM SINGLE PIECE PACK
1098 OI 109 c CANCELLOUS SCREW 4.0 MM (FULL
THREAD) 25MM SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
296 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
1099 OI 109 d CANCELLOUS SCREW 4.0 MM (FULL
THREAD) 30 MM SINGLE PIECE PACK
1100 OI 109 e CANCELLOUS SCREW 4.0 MM (FULL
THREAD) 35 MM SINGLE PIECE PACK
1101 OI 109 f CANCELLOUS SCREW 4.0 MM (FULL
THREAD) 40 MM SINGLE PIECE PACK
1102 OI 109g CANCELLOUS SCREW 4.0 MM (FULL
THREAD) 45MM SINGLE PIECE PACK
1103 OI 109 h CANCELLOUS SCREW 4.0 MM (FULL
THREAD) 50MM SINGLE PIECE PACK
1104 OI 109 i CANCELLOUS SCREW 4.0 MM (FULL
THREAD) 55 MM SINGLE PIECE PACK
1105 OI 109 j CANCELLOUS SCREW 4.0 MM (FULL
THREAD) 60 MM SINGLE PIECE PACK
1106 OI 110 a CANCELLOUS SCREW 4.0 MM
(SHORT THREAD) 15MM SINGLE PIECE PACK
1107 OI 110 b CANCELLOUS SCREW 4.0 MM
(SHORT THREAD) 20 MM SINGLE PIECE PACK
1108 OI 110 c CANCELLOUS SCREW 4.0 MM
(SHORT THREAD) 25MM SINGLE PIECE PACK
1109 OI 110 d CANCELLOUS SCREW 4.0 MM
(SHORT THREAD) 30 MM SINGLE PIECE PACK
1110 OI 110 e CANCELLOUS SCREW 4.0 MM
(SHORT THREAD) 35 MM SINGLE PIECE PACK
1111 OI 110 f CANCELLOUS SCREW 4.0 MM
(SHORT THREAD) 40 MM SINGLE PIECE PACK
1112 OI 110 g CANCELLOUS SCREW 4.0 MM
(SHORT THREAD) 45MM SINGLE PIECE PACK
1113 OI 110 h CANCELLOUS SCREW 4.0 MM
(SHORT THREAD) 50MM SINGLE PIECE PACK
1114 OI 110 i CANCELLOUS SCREW 4.0 MM
(SHORT THREAD) 55 MM SINGLE PIECE PACK
1115 OI 110 j CANCELLOUS SCREW 4.0 MM
(SHORT THREAD) 60 MM SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
297 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
1116 OI 111 a CANCELLOUS SCREW 6.5MM
(16MM THREAD) 35 MM SINGLE PIECE PACK
1117 OI 111 b CANCELLOUS SCREW 6.5MM
(16MM THREAD) 40 MM SINGLE PIECE PACK
1118 OI 111 c CANCELLOUS SCREW 6.5MM
(16MM THREAD) 45mm SINGLE PIECE PACK
1119 OI 111d CANCELLOUS SCREW 6.5MM
(16MM THREAD) 50m SINGLE PIECE PACK
1120 OI 111 e CANCELLOUS SCREW 6.5MM
(16MM THREAD) 55mm SINGLE PIECE PACK
1121 OI 111 f CANCELLOUS SCREW 6.5MM
(16MM THREAD) 60mm SINGLE PIECE PACK
1122 OI 111 g CANCELLOUS SCREW 6.5MM
(16MM THREAD) 65mm SINGLE PIECE PACK
1123 OI 111 h CANCELLOUS SCREW 6.5MM
(16MM THREAD) 70mm SINGLE PIECE PACK
1124 OI 111 i CANCELLOUS SCREW 6.5MM
(16MM THREAD) 75mm SINGLE PIECE PACK
1125 OI 111 j CANCELLOUS SCREW 6.5MM
(16MM THREAD) 80mm SINGLE PIECE PACK
1126 OI 111 k CANCELLOUS SCREW 6.5MM
(16MM THREAD) 85mm SINGLE PIECE PACK
1127 OI 111 l CANCELLOUS SCREW 6.5MM
(16MM THREAD) 90mm SINGLE PIECE PACK
1128 OI 111
m CANCELLOUS SCREW 6.5MM
(16MM THREAD) 95mm SINGLE PIECE PACK
1129 OI 111 n CANCELLOUS SCREW 6.5MM
(16MM THREAD) 100mm SINGLE PIECE PACK
1130 OI 111 o CANCELLOUS SCREW 6.5MM
(16MM THREAD) 105mm SINGLE PIECE PACK
1131 OI 111 p CANCELLOUS SCREW 6.5MM
(16MM THREAD) 110mm SINGLE PIECE PACK
1132 OI 112 a CANCELLOUS SCREW 6.5MM
(32MM THREAD) 35 MM SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
298 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
1133 OI 112 b CANCELLOUS SCREW 6.5MM
(32MM THREAD) 40 MM SINGLE PIECE PACK
1134 OI 112 c CANCELLOUS SCREW 6.5MM
(32MM THREAD) 45mm SINGLE PIECE PACK
1135 OI 112 d CANCELLOUS SCREW 6.5MM
(32MM THREAD) 50m SINGLE PIECE PACK
1136 OI 112 e CANCELLOUS SCREW 6.5MM
(32MM THREAD) 55mm SINGLE PIECE PACK
1137 OI 112 f CANCELLOUS SCREW 6.5MM
(32MM THREAD) 60mm SINGLE PIECE PACK
1138 OI 112 g CANCELLOUS SCREW 6.5MM
(32MM THREAD) 65mm SINGLE PIECE PACK
1139 OI 112 h CANCELLOUS SCREW 6.5MM
(32MM THREAD) 70mm SINGLE PIECE PACK
1140 OI 112 i CANCELLOUS SCREW 6.5MM
(32MM THREAD) 75mm SINGLE PIECE PACK
1141 OI 112 j CANCELLOUS SCREW 6.5MM
(32MM THREAD) 80mm SINGLE PIECE PACK
1142 OI 112 k CANCELLOUS SCREW 6.5MM
(32MM THREAD) 85mm SINGLE PIECE PACK
1143 OI 112 l CANCELLOUS SCREW 6.5MM
(32MM THREAD) 90mm SINGLE PIECE PACK
1144 OI 113 a CANCELLOUS SCREW 6.5MM (FULL
THREAD) 25 MM SINGLE PIECE PACK
1145 OI 113 b CANCELLOUS SCREW 6.5MM (FULL
THREAD) 30 MM SINGLE PIECE PACK
1146 OI 113 c CANCELLOUS SCREW 6.5MM (FULL
THREAD) 35 MM SINGLE PIECE PACK
1147 OI 113 d CANCELLOUS SCREW 6.5MM (FULL
THREAD) 40 MM SINGLE PIECE PACK
1148 OI 113 e CANCELLOUS SCREW 6.5MM (FULL
THREAD) 45mm SINGLE PIECE PACK
1149 OI 113 f CANCELLOUS SCREW 6.5MM (FULL
THREAD) 50m SINGLE PIECE PACK
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
299 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
1150 OI 113 g CANCELLOUS SCREW 6.5MM (FULL
THREAD) 55mm SINGLE PIECE PACK
1151 OI 113 h CANCELLOUS SCREW 6.5MM (FULL
THREAD) 60mm SINGLE PIECE PACK
1152 OI 113 i CANCELLOUS SCREW 6.5MM (FULL
THREAD) 65mm SINGLE PIECE PACK
1153 OI 113 j CANCELLOUS SCREW 6.5MM (FULL
THREAD) 70mm SINGLE PIECE PACK
1154 OI 114 WASHER LARGE SINGLE PIECE PACK
1155 OI 115 WASHER SMALL SINGLE PIECE PACK
1156 OI 116 a MALLEOLAR SCREWS 4.5MM 25 MM SINGLE PIECE PACK
1157 OI 116 b MALLEOLAR SCREWS 4.5MM 30 MM SINGLE PIECE PACK
1158 OI 116 c MALLEOLAR SCREWS 4.5MM 35 MM SINGLE PIECE PACK
1159 OI 116 d MALLEOLAR SCREWS 4.5MM 40 MM SINGLE PIECE PACK
1160 OI 116 e MALLEOLAR SCREWS 4.5MM 45mm SINGLE PIECE PACK
1161 OI 116 f MALLEOLAR SCREWS 4.5MM 50m SINGLE PIECE PACK
1162 OI 116 g MALLEOLAR SCREWS 4.5MM 55mm SINGLE PIECE PACK
1163 OI 116 h MALLEOLAR SCREWS 4.5MM 60mm SINGLE PIECE PACK
1164 OI 116 i MALLEOLAR SCREWS 4.5MM 65mm SINGLE PIECE PACK
1165 OI 116 j MALLEOLAR SCREWS 4.5MM 70mm SINGLE PIECE PACK
1166 OI 117 a U-STAPLES 1.5 MM DIA 12 MM
1167 OI 117 b U-STAPLES 2.0 MM DIA 18 MM
1168 OI 117 c U-STAPLES 2.5 MM DIA 24 MM
1169 OI 117 d U-STAPLES 3.0 MM DIA 36 MM
1170 OI 118 a COVANTARY STAPLES SMALL
1171 OI 118 b COVANTARY STAPLES MEDIUM
1172 OI 118 c COVANTARY STAPLES LARGE
Spinal SCREW & wire
RFP for Empanelment of Approved Analytical Testing Laboratories for Analysis of Drugs, Surgical & Sutures Items
300 | P a g e
S. No.
Code Name Size/Strength Specifications Basic rate of testing (A)
Service Tax (B)
Rate (inclusive All taxes)
(A+B)
1173 OI 119 a PEDICAL SCREW 42 MM
1174 OI 119 b PEDICAL SCREW 44 MM
1175 OI 119 c PEDICAL SCREW 46 MM
1176 OI 119 d PEDICAL SCREW 48 MM
1177 OI 119 e PEDICAL SCREW 50 MM
1178 OI 119 f PEDICAL SCREW 52 mm
1179 OI 119 g PEDICAL SCREW 54 MM
1180 OI 120 a HEART SHILL CAGE 20 MM
1181 OI 120 b HEART SHILL CAGE 30 MM
1182 OI 120 c HEART SHILL CAGE 40 MM
1183 OI 120 d HEART SHILL CAGE 50 MM
1184 OI 120 e HEART SHILL CAGE 60 MM
1185 OI 120 f HEART SHILL CAGE 70 MM
1186 OI 120 g HEART SHILL CAGE 80 MM
1187 OI 121 DOUBLE WIRE 1 MM TO 2 MM