Rob Palmer Solution Director Even More Things You Can Use on Monday.

transcript

Rob PalmerSolution Director

Even More Things You Can Use on Monday

More Things You Can Use on Monday

Agenda SET Parameters Reporting Synonyms Dialogue Manager Functions App Commands Troubleshooting Efficiency

SET Parameters

A few more of my favourite SET parameters SUBTOTALS ONFIELD TESTDATE DATETIME BUSDAYS HDAY EQTEST EXPANDABLE, EXPANDBYROW

SET Parameters – SUBTOTALS

Controls where all subtotals are placed Options: ABOVE, BELOW Default: BELOW

SET SUBTOTALS=BELOW SET SUBTOTALS=ABOVE

SET Parameters – ONFIELD

Controls the outcome when a field referenced by “ON field …” is not used in the report

Options: IGNORE, ALL Default: ALL

CATEGORY used on a SUBTOTAL but not as a BY field

TABLE FILE GGSALES SUM DOLLARS BY REGION BY PRODUCT ON CATEGORY SUBTOTALEND

SET Parameters – ONFIELD

Copyright

Information Builders. Slide 7

SET ONFIELD = ALL

SET ONFIELD = IGNORETABLE FILE GGSALES SUM DOLLARS BY REGION BY PRODUCT ON CATEGORY SUBTOTALEND

0 ERROR AT OR NEAR LINE 7 IN PROCEDURE onfield FOCEXEC *(FOC013) THE 'ON FIELDNAME' FIELD IS NOT A SORT FIELD: CARBYPASSING TO END OF COMMAND(FOC009) INCOMPLETE REQUEST STATEMENT

SET Parameters – TESTDATE

Changes current WebFOCUS “Today” date Options: YYMD, date Default: Current system date

SET TESTDATE = 20120602

2012060206022012June 2, 2012

-TYPE &YYMD-TYPE &MDYY-TYPE &DATEMtrDYY

SET Parameters – DATETIME

Controls &TOD (current time variable) Options: STARTUP, CURRENT, RESET Default: STARTUP

SET DATETIME = STARTUP

15.07.570 NUMBER OF RECORDS IN TABLE= 5 LINES= 515.07.570 NUMBER OF RECORDS IN TABLE= 10 LINES= 1015.07.57

-TYPE &TOD TABLE FILE -TYPE &TOD TABLE FILE -RUN-TYPE &TOD

……

SET DATETIME = CURRENT

-TYPE &TOD TABLE FILE -TYPE &TOD TABLE FILE -RUN-TYPE &TOD

……

SET DATETIME = CURRENT

-TYPE &TOD TABLE FILE -TYPE &TOD SET DATETIME = RESET TABLE FILE -RUN-TYPE &TOD

SET Parameters – BUSDAYS

Controls definition of business days Options: SMTWTFS, _ to skip Default: _MTWTF_

SET TESTDATE = 20120602SET BUSDAYS = SMTWTFS

COMPUTE TODAY/MtDYY='&MDYY'; COMPUTE NEXT_BUSDAY/MtDYY = DATEADD(TODAY, 'BD', 1);

Friday Saturday

SET Parameters – BUSDAYS

SET TESTDATE = 20120602SET BUSDAYS = _MTWTF_

COMPUTE TODAY/MtDYY = '&MDYY'; COMPUTE NEXT_BUSDAY/MtDYY = DATEADD(TODAY, 'BD', 1);

Friday Monday

SET Parameters – HDAY

Identifies holidays; affects business days Options: xxxx (filename: /ibi/srv77/wfs/etc/hdayxxxx.err) Default: none

20120102 New Year's Day 20120116 Martin Luther King, Jr. 20120220 President's Day 20120528 Memorial Day 20120704 Independence Day 20120903 Labor Day 20121008 Columbus Day 20121112 Veterans Day 20121122 Thanksgiving Day 20121225 Christmas Day

20120102 New Year's Day20120220 Family Day20120406 Good Friday20120409 Easter Monday20120521 Victoria Day20120701 Canada Day20120806 Civic Holiday20120903 Labour Day20121008 Thanksgiving Day20121111 Remembrance Day20121225 Christmas Day20121226 Boxing Day

hdayusxx.err hdaycanx.err

SET Parameters – HDAY

Friday Monday

SET HDAY = CANX

Friday Tuesday

SET HDAY = USXX

SET Parameters – EQTEST

Controls how $ are interpreted in a WHERE/IF Options: WILDCARD, EXACT Default: WILDCARD

Applies to ‘$’ and ‘$*’

SET Parameters – EQTEST

SET EQTEST = WILDCARD SET EQTEST = EXACT

TABLE FILE GGSALES

IF NEW_PRODUCT_ID EQ 'G10$'END

SET Parameters – EXPANDABLE, EXPANDBYROW

Controls accordion reports

EXPANDABLE Expands by column (horizontal) Options: ON, OFF Default: OFF

EXPANDBYROW Expands by row (vertical) Options: ON, OFF, n Default: OFF

SET EXPANDABLE = OFFSET EXPANDBYROW = OFF

SET EXPANDABLE = ON

SET EXPANDBYROW = ON

SET EXPANDBYROW = 2

Reporting

Conditional page headings and footings HOLD into an APP folder MORE FILEDEF with wildcards

Reporting – Conditional page headings and footings

Control HEADING and FOOTING with WHEN

TABLE FILE GGSALES

HEADING "Heading for Midwest"WHEN REGION EQ 'Midwest';

HEADING "Standard Heading"WHEN REGION NE 'Midwest';

SUM DOLLARSBY REGION PAGE-BREAKEND

APP HOLD appname ON TABLE HOLD AS appname\filename

Data and MFD written to temp

Reporting – HOLD into an APP folder

TABLE FILE CARSUM SALESBY COUNTRYBY CARON TABLE HOLD AS HSALESEND

Default

APP HOLD appname

Puts hsales.ftm AND hsales.mas into the summit app folder APP HOLDMETA appname just holds .mas APP HOLDDATA appname just holds .ftm

Reporting – HOLD into an APP folder

APP HOLD summitTABLE FILE CAR SUM SALES BY COUNTRY BY CAR ON TABLE HOLD AS HSALESEND

Reporting – Hold Files

ON TABLE HOLD directly to an app folder HOLD AS app/filename

Puts hsales.mas and hsales.ftm into the summit app folder Includes DATASET attribute in .mas

TABLE FILE CAR SUM SALES BY COUNTRY BY CAR ON TABLE HOLD AS summit/HSALESEND

FILENAME=HSALES, SUFFIX=FIX, DATASET=summit/hsales.ftm ,$

Reporting – MORE

Universal concatenation Enables concatenation of like Internal Matrix

DEFINE FILE CAR DOLLARS/I8=SALES; REGION/A11=COUNTRY;END

GGSALES

TABLE FILE filename SUM DOLLARS BY REGIONEND

Use the same report for both files Internal Matrix concatenated before output generated

Reporting – MORE

DEFINE FILE CAR DOLLARS/I8=SALES; REGION/A11=COUNTRY;END

TABLE FILE GGSALES SUM DOLLARS BY REGIONMORE FILE CAREND

Reporting – MORE

Can independently filter on each file All other formatting and styling goes with main TABLE FILE Now supported in Report Painter

TABLE FILE GGSALES SUM DOLLARS BY REGION IF REGION EQ ‘Midwest’ ON TABLE COLUMN-TOTALMOREFILE CARIF COUNTRY EQ ‘ENGLAND’ OR ‘JAPAN’END

Reporting – Filedef with wildcards

Enables concatenation of like flat files

h_cty_england.ftm h_cty_japan.ftm

TABLE FILE H_CTY_ENGLAND SUM SALES BY COUNTRY BY CARMOREFILE H_CTY_JAPANEND

Could use MORE to concatenate them

Not only same Internal Matrix, but same file structure Filedef with a wildcard

APP FI H_CTY DISK summit/h_cty*.ftm

TABLE FILE H_CTY SUM SALES BY COUNTRY BY CAREND

h_cty_england

h_cty_japan

Synonyms (Master Files and Access Files)

Synonyms

FILEDEF with wildcards MFD Profiles CHECK FILE ?FF

Synonyms – Filedef with wildcards

Works on DATASET attribute in synonym

FILENAME=H_CTY ,SUFFIX=FIX ,DATASET=summit/h_cty*.ftm ,$ SEGMENT=H_CTY ,SEGTYPE=S2, $ FIELDNAME=COUNTRY ,ALIAS=E01 ,USAGE=A10 ,ACTUAL=A12 ,$ FIELDNAME=CAR ,ALIAS=E02 ,USAGE=A16 ,ACTUAL=A16 ,$ FIELDNAME=SALES ,ALIAS=E03 ,USAGE=I6 ,ACTUAL=I04 ,$

h_cty_england

h_cty_japan

Defines a profile to run when the MFD is accessed MFD_PFOFILE = appname/profile

ggfilter.fex

Synonyms – MFD Profiles

FILENAME=GGSALES, SUFFIX=FOC, MFD_PROFILE=summit/ggfilter

FILTER FILE GGSALES NAME = REGION WHERE REGION EQ 'Midwest';END

SET FILTER = REGION IN GGSALES ON

Synonyms – MFD Profiles

TABLE FILE GGSALES SUM DOLLARS BY REGION BY PRODUCTEND

Profile runs first ggfilter turns on FILTER

Syntax check of MFD/AFD Provides vital statistics of the synonym

CHECK FILE synonym [HOLD]

Synonyms – CHECK FILE

NUMBER OF ERRORS= 0NUMBER OF SEGMENTS= n ( REAL= n VIRTUAL= n )NUMBER OF FIELDS= n INDEXES= n FILES= n NUMBER OF DEFINES= n TOTAL LENGTH OF ALL FIELDS= n

Creates a hold file and mfd with key components of the original synonym Field names Formats etc.

Synonyms – CHECK FILE

CHECK FILE EMPLOYEE

CHECK FILE EMPLOYEE HOLD

Synonyms – ?FF

Shows all the fields in an MFD

?FF GGSALESFILENAME= GGSALESSEQ_NO SEQ I5CATEGORY E02 A11PCD E03 A04PRODUCT E04 A16REGION E05 A11ST E06 A02CITY E07 A20STCD E08 A05DATE E09 I8YYMDUNITS E10 I08DOLLARS E11 I08BUDUNITS E12 I08BUDDOLLARS E13 I08

Dialogue Manager

-READFILE Date format support NOCLOSE Immediate execution following a label

Dialogue Manager – -READFILE

TABLE FILE CAR SUM SALES BY COUNTRY BY CAR ON TABLE HOLD AS HSALESEND-RUN-SET &CARS=&RECORDS;

-REPEAT LOOP_SALES FOR &I FROM 1 TO &CARS-READ HSALES &COUNTRY.A15. &CAR.A15. &SALES.A11.-LOOP_SALES

Reads a synonym and gives you & variables for all fields in an MFD Traditional technique:

Dialogue Manager – -READFILE

TABLE FILE CAR SUM SALES BY COUNTRY BY CAR ON TABLE HOLD AS HSALESEND-RUN-SET &CARS=&RECORDS;

-REPEAT LOOP_SALES FOR &I FROM 1 TO &CARS-READFILE HSALES

Using –READFILE

Creates &COUNTRY, &CAR, &SALES

Dialogue Manager – Date format support

-SET &START = 'JUN 3 2012' ;-SET &END = '2012 7 JUN' ;-SET &DAYS = (&END - &START) + 1 ;

-TYPE Summit is &DAYS days long.

Summit is 5 days long.

DM recognizes date literals Enables direct calculations using date & variables

&DATEfmt – displays current date in selected format

&DATXfmt – truncates display value

Dialogue Manager – Date display formats

-TYPE &DATEYYMD-TYPE &DATEMDYY-TYPE &DATEMtrDYY

-TYPE &DATEMtrDYY is the current date2012/06/0306/03/2012June 3, 2012

-TYPE &DATXMtrDYY is the current date

June 3, 2012 is the current date

Dialogue Manager – NOCLOSE

Enables file to processed with –READ and –WRITEwithout closing on a –RUN

hcountry.ftm

-REPEAT READ_LOOP 5 TIMES-READ HCOUNTRY &COUNTRY.A10.-TYPE &COUNTRY-READ_LOOP

No -RUN

-REPEAT READ_LOOP 5 TIMES-READ HCOUNTRY &COUNTRY.A10.-TYPE &COUNTRY. . . Some other stuff happens-RUN-READ_LOOP

-RUN closes hcountry

With -RUN

-REPEAT READ_LOOP 5 TIMES-READ HCOUNTRY NOCLOSE &COUNTRY.A10.-TYPE &COUNTRY-RUN-READ_LOOP

hcountry does not close

Using NOCLOSE

-REPEAT READ_LOOP 5 TIMES-READFILE HCOUNTRY-TYPE &COUNTRY-RUN-READ_LOOP

hcountry does not close

Using -READFILE

Dialogue Manager – NOCLOSE and –WRITE

Works the same way with –WRITE

Appends after first write but not on first write Avoids pre-delete and (APPEND

APP FI LOGFILE DISK summit/logfile.ftm

-WRITE LOGFILE Part 1-RUN-WRITE LOGFILE Part 2

logfile.ftmPart 2

-WRITE LOGFILE NOCLOSE Part 1-RUN-WRITE LOGFILE NOCLOSE Part 2

logfile.ftmPart 1Part 2

Dialogue Manager – –CLOSE

To explicitly close a file at anytime:

Next –READ or –WRITE is at the top of the file

-CLOSE filename

Dialogue Manager – Immediate execution following a label

Dialogue manager commands can follow a label

Labels can now be 64 characters long

-labelname command

-GOTO MESSAGE

-MESSAGE TYPE Here is a message

-GOTO SET_COUNTRY

-SET_COUNTRY SET &COUNTRY='ENGLAND';

Here is a message

&COUNTRY set to ‘ENGLAND’

Functions

A few more of my favourite functions TRIM LCWORD, LCWORD2, LCWORD3 SLEEP

Functions - TRIM

Removes leading or trailing occurrences of a character TRIM(trim_where, source_string, length, pattern, sublength, output) trim_where: L=Leading, T=Trailing, B=Both

Trim leading 0`s

TRIMMED/A10=TRIM('L', VALUE, 10, '0', 1, TRIMMED);

Trim trailing dots

Functions - TRIM

TRIMMED/A10=TRIM('T', VALUE, 10, '.', 1, TRIMMED);

Functions – LCWORD, LCWORD2, LCWORD3

Convert strings to mixed case Each handles special situations differently Syntax is the same for all 3

LCWORD (length, string, output) LCWORD2 (length, string, output) LCWORD3 (length, string, output)

Functions – LCWORD, LCWORD2, LCWORD3

Functions - SLEEP

Puts WebFOCUS into a wait state Two ways implement it SLEEP n SLEEP(delay, output);

Functions - SLEEP

SLEEP n

SET DATETIME = CURRENT-RUN-TYPE &TOD SLEEP 5-RUN-TYPE &TOD SLEEP 10-RUN-TYPE &TOD SLEEP 5-RUN-TYPE &TOD

Functions - SLEEP

SLEEP(delay, output);

TABLE FILE CAR PRINT COUNTRY NOPRINT COMPUTE STIME/A8=HHMMSS('A8'); DELAY=SLEEP(5, 'I1'); ETIME/A8=HHMMSS('A8'); IF RECORDLIMIT EQ 1 END

APP Commands

APP Commands – APP DELETE

APP DELETEFILE appname {filename|*} filetype

DELETE a file from an APP folder

APP DELETEFILE summit ROBHOLD FOCTEMP

By default procedures found in current APP PATH Procedures can also be reference by APP name Can run procedures anywhere without changing the path

Includes monthly_report.fex out of sales APP folder

Execute turnover_report out of hr APP folder

APP Commands – Explicit reference to a procedure

-INCLUDE sales/monthly_report

EX hr/turnover_report

Troubleshooting

SET HOLDLIST=PRINTONLYTABLE FILE GGSALES SUM UNITS DOLLARS BY PRODUCT BY REGION BY ST NOPRINT BY CITY BY DATE ON TABLE HOLD AS HOLDEND

Troubleshooting - LET NOPRINT = ;

FILENAME= HOLDPRODUCT E01 A16REGION E02 A11CITY E03 A20 DATE E04 I8YYMD UNITS E05 I08DOLLARS E06 I08

?FF HOLD

FILENAME= HOLD1PRODUCT E01 A16REGION E02 A11ST E03 A02CITY E04 A20DATE E05 I8YYMDUNITS E06 I08DOLLARS E07 I08

Troubleshooting - LET NOPRINT = ;

?FF HOLD1

LET NOPRINT=;

SET HOLDLIST=PRINTONLYTABLE FILE GGSALES SUM UNITS DOLLARS BY PRODUCT BY REGION BY ST NOPRINT BY CITY BY DATE ON TABLE HOLD AS HOLDEND

Efficiency

Efficiency - SQL SET LOADONLY ON

MODIFY FILE synonym FIXFORM FROM ftm MATCH keys ON NOMATCH INCLUDE ON MATCH REJECTDATA ON ftmEND

Backend MODIFY to load data

MATCH = select, INCLUDE = insert

Efficiency - SQL SET LOADONLY ON

MODIFY FILE synonym SQL SET LOADONLY ON FIXFORM FROM ftm MATCH keys ON NOMATCH INCLUDE ON MATCH REJECTDATA ON ftmEND

Backend MODIFY to load data Use Load Only

MATCH = nothing, INCLUDE = insert INSERTs only

Thank You!

Come back next year for:

Still More Things You Can Use on Monday

Rob Palmer Solution Director Even More Things You Can Use on Monday.

Documents