Post on 15-Oct-2021
transcript
8755 W. Higgins Road
Suite 500
Chicago, IL 60631
www.littelfuse.com
Product Description: MDCG-4 Q 2597 PI 28-30
Product Number: MDCG-4-Q2597
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REDD
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Diana Jane D. Gabinete
Environmental Data Analyst
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with
RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid
Eu RoHS exemptions may be indicated as applicable.
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins Road
Suite 500
Chicago, IL 60631
www.littelfuse.com
Product Description: MDCG-4 Q 2417 2 PI 19-21
Product Number: MDCG-4-Q2417
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REDD
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Diana Jane D. Gabinete
Environmental Data Analyst
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with
RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid
Eu RoHS exemptions may be indicated as applicable.
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins Road
Suite 500
Chicago, IL 60631
www.littelfuse.com
Product Description: MDCG-4-Q4343
Product Number: MDCG-4-Q4343
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REDD
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Jenny Dinglasan
Global EHS Supervisor
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with
RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid
Eu RoHS exemptions may be indicated as applicable.
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins Road
Suite 500
Chicago, IL 60631
www.littelfuse.com
Product Description: MDCG-4 Q 4306 PI 12-14
Product Number: MDCG-4-Q4306
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REDD
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Jenny Dinglasan
Global EHS Supervisor
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with
RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid
Eu RoHS exemptions may be indicated as applicable.
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins Road
Suite 500
Chicago, IL 60631
www.littelfuse.com
Product Description: MOD MDCG-4 Q1383 3 19-22
Product Number: MDCG-4-Q1383-3
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REDD
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Jenny Dinglasan
Global EHS Supervisor
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with
RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid
Eu RoHS exemptions may be indicated as applicable.
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins Road
Suite 500
Chicago, IL 60631
www.littelfuse.com
Product Description: MDCG-4 Q 1827 5 CELLNET
Product Number: MDCG-4-Q1827-5
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REDD
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Jenny Dinglasan
Global EHS Supervisor
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with
RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid
Eu RoHS exemptions may be indicated as applicable.
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: MDCG-4 Q 1471 25-30Product Number: MDCG-4-Q1471
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Diana Jane De Guzman - GabineteGlobal EHS Analyst
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: MDCG-4 Q 2019 P.I. 20-25Product Number: MDCG-4-Q2019
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Diana Jane De Guzman - GabineteGlobal EHS Analyst
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: MDCG-4 Q 1545 1 SENTROLProduct Number: MDCG-4-Q1545-1
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Global EHS Analyst
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q2406-1
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q1446
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-27-33
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q1578
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q2043
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q2126
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q3009
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q3881
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q4195
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q4025
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part
NumberRaw Material Description
Applicable RoHS Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q2405-1
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q2139-1
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q2125
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q1734
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q4209
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q2513-1
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q2543
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q2624-1
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q2652
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q3123
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q4180
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q4342
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q4199
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: Sub-miniature Normally Open Reed SwitchProduct Number: MDCG-4-Q2635
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-1517 H11092 GLASS TUBE
ICP-1958 H32537 SPUTTERED REED
ICP-1515 H11144 RAW REED
ICP-1518 H35193 TIN ANODE BALLS
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2 Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse com
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
2. Retrieve the username and password thru your corresponding Sales / FAE or email envrequests@littelfuse.com
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to envrequests@littelfuse.com