Post on 07-Mar-2016
description
transcript
IMPACT MARKINGImpact and roller marking machines available as manual, pneumatic,
electro-pneumatic models for permanent marking
HOT MARKING Hot marking for products such as leather, plastic, paper, wood, cloth,
with or without colour
MULTI PIN MARKINGHighly sophisticated and very fast computerised systems
SINGLE PIN MARKINGVersatile and technologically advanced systems for marking text or logos
in an arc, angle, or straight line, via a PC
READING AND TRACKINGReading via a camera and processing of the matrix OCR computerised marking
TAG MARKINGWide range of manual and computerised systems
LASER MARKINGLaser systems using Nd Yag lamp, Diode or CO2 source
to mark any material and shape
ELECTRO-CHEMICAL MARKINGEtching process for permanent identification of metal surfaces
through an engraved stencil
HYDRAULIC MARKINGHydraulic systems to mark steel chassis, bars, railings, beams
SCRIBE MARKING Computerised drag marking machines to mark by “scratching” the surface,
without causing any deformation or noise
SPECIAL APPLICATIONSProject and realisation of special systems for marking, identifying, tracking
READING AND DECODIFICATION
Datamatrix code
AUTOMATOR INTERNATIONAL Marking Systems
The Automator brochures collection
2
presents its extensive range of standard andspecial machines for marking, stamping,identifiying, punching, numbering, lettering etc. ...in other words for leaving an indelible andpermanent mark on any surface or productwhatsoever. Impeccable quality and the highesttechnology are the basis for our ability to meetthe most demanding and varied requirementsof our customers, whatever branch of industrythey may come from.The extensive range which constitutes theAUTOMATOR program provides the highestproductivity using the latest productionprocesses.More than 50 ye a rs ’ experience guaranteesthat Automator will offer their customers anexclusive service to solve their particularmarking problems.Starting with interchangeable types and hand
stamps, through mechanical and pneumaticmachines, and finally reaching the latest, mostadvanced and innovative computerised systems,Automator always takes a leading role thanksto the very high qualitative and technologicalstandards it sets for itself in the internationalmarket place.Automator is also very well represented inemerging markets overseas and in the far east.An extremely well trained and conscientiousstaff which isfocused onprogress andinnovation toobtain thehighest precisionand quality forthe product andfor customerservice is thecorner-stone ofAutomator’ssuccess.Reliability is forAutomator thetrademark whichknows no frontiers.
AUTOMATORINTERNATIONAL
3
MECHANICAL DRAWING
SMALL DIAMETERS
• The manual roller marking machine for theperfect marking of round components, eithersolid or hollow from 8-65mm diameter.
• Solid round components are marked usingroller support, type S2R.Thin walled hollowparts are marked using mandrel support typeS1R.
Front Side
Mod.MB 41E
• Motorized version of the machine MB41N.• With geared motor connected to 380V, 3 phase, 50 Hz.• Mounted on bench, model TP.• Twin push button safety system is integrated in the bench.• Suitable for marking round components from 8-65 mm
diameter.
FrontSideRear
Opzionale
We reserve the right to amend specificationswhitout notice, you can download the last release
on our site at:http://www.automator.com/Download.asp
Disegni e specifiche potranno essere variati senza preavviso.
MECHANICAL DRAWING
Mod.MB 41N
4
MEDIUM SIZE DIAMETERS
Mod.MB 71N
Mod.MB 71UE
• Manually operated machine for marking, graduating numbering etc. of cylindrical, conical or flat components. Maximum diameter of round components: 110 mm
• Simple setting of depth of mark.• The table is fitted with spring washers to even out differences in diameter
and to achieve consistent depth of mark.• Large range of accessories available.
• Electrical marking unit with slide movementvia a geared motor.
• For marking, graduating, numbering ofcylindrical, conical and flat components.
• Linear marking takes place by rolling• Specially designed for integration in
production lines.
Front Side
Front SIDE
MECHANICAL DRAWING
MECHANICAL DRAWING
We reserve the right to amend specifications whitout notice,you can download the last release on our site at:http://www.automator.com/Download.asp
5
MECHANICAL DRAWING
MECHANICAL DRAWING
• Electrically operated rollermarking machine formarking, graduating,numbering of variouslyshaped round componentsup to a maximum of110 mm diameter.
• Simple setting of the depth of mark.
• The table is fitted with spring washers to evenout differences in diameter and to achieveconsistent depth of mark.
• Operation is via electrical twin push buttons.All electrical components are built into the bench, type TG.
• Electrically operated machine with additional pneumaticmovement of the table.This ensures perfect and uniformmarking every time.
• PLC control of all movements.
Front Side
Rear
Front Side
Rear
Opzionale
Opzionale
Mod.MB 71E
Mod.MB 71EP
MEDIUM SIZEDDIAMETERS
6
CONTINUOUS ROLLER MARKING
We reserve the right to amend specifications whitout notice, you candownload the last release on our site at:http://www.automator.com/Download.asp
Continuous, repeated marking on bars, hexagonals, tubes and profiled material etc.The symbols, logos or text are rolled into the material using a marking roller of 60 mm diameter. Production rate: 6 metre/min. Output can be doubled by using two rollerssimultaneously.
Front Side
Rear
Mod.MB 71CE
MECHANICAL DRAWING
7
HORIZONTALM
EC
HA
NIC
AL
DR
AW
ING
Side(photo side) Front
Rear(motor side)
inside
interno
opzionale
• These roller marking machines will markhorizontally placed round parts and flanges upto 650 mm diameter.
• The maximum length of text must not exceed 180 mm,but can be one or more lines.
• Deeper marking can be achieved by repeating the samemarking cycle several times.The part to be marked ispressed against the typeholder using spring washers withadjustable resistance.
• Loading and unloading are carried out manually.• The machine is operated using twin push button
actuation.• The pneumatic model (EP) has an approach sroke
of 22 mm (to feed forward the part to the markinghead).
• 2 versions are available:E with the characteristics of the electric model MB 71EEP with the characteristics of the elctropneumaticmodel MB 71EP
Mod.MB 76E 90°
Mod.MB 76EP 90°
8
ME
CH
AN
ICA
L D
RA
WIN
G
Mod.MB 76N
Mod.MB 76E
• With these roller marking machine verticallypositioned round components, rings etc up to 1000 mmdiameter can be marked with any required text.
• The pneumatic model (EP) has a vertical movementof 22 mm.
• The maximum length of text is 180 mm and can beof one or more linea.
• Deeper marking can be achieved by repeating thesame marking cycle several times.The part to bemarked is pressed against the typeholder using springwashers.
• Loading and unloading are carried out manually.• The machine is operated using twin push button
actuation.• 3 versions are available:N: manual operaionE: electrically drivenEP: electrically driven with pneumatic feed of the part to the marking head
SPECIAL ROUND COMPONENTS
Mod.MB 76EP
(opzionale)
gruppo
Front Side
Rear
We
rese
rve
the
righ
t to
am
end
spec
ifica
tions
whi
tout
not
ice,
you
can
dow
nloa
d th
e la
st r
elea
se o
n ou
r si
te a
t:ht
tp://
ww
w.a
utom
ator
.com
/Dow
nloa
d.as
p
9
TE
CH
NIC
AL
SP
EC
IFIC
AT
ION
S
We
rese
rve
the
righ
t to
am
end
spec
ifica
tions
whi
tout
not
ice
MB
41N
295
300
240
30_
__
__
__
__
__
__
125
MB
41E
600
1.09
060
030
300
760
__
__
__
__
__
_12
5
MB
71N
340
830
310
125
__
__
__
__
__
__
_23
5
MB
71E
360
1.02
050
012
523
073
035
045
031
019
048
056
0_
__
__
235
MB
71EP
600
1.73
060
012
523
073
076
0_
480
560
__
__
__
_23
5
MB
71C
E34
083
031
012
5_
_48
0_
570
__
__
__
__
235
MB
71U
E40
045
056
0_
290
160
295
425
130
250
215
__
__
__
_
MB
76E
90°
530
1.17
01.
000
_50
019
075
0_
910
380
750
190
190
480
470
350
440
_
MB
76EP
90°
530
1.17
01.
000
_50
019
075
0_
910
380
750
190
190
480
470
350
440
_
MB
76E
730
1.78
565
0_
280
685
820
_48
056
0_
__
__
__
_
MB
76EP
730
1.78
565
0_
280
685
820
_48
056
0_
__
__
__
_
AB
CD
EF
GH
IL
MN
OP
XY
ZW
6535
__
__
100
_
6511
0_
0,18
380
_10
0_
110
126
130
__
1018
0_
110
138
130
0,55
380
1018
0_
110
230
130
0,55
380
1018
06-
8
8015
513
00,
5538
010
__
_50
_0,
5538
0_
180
_
600/
650
360
_0,
5538
0_
290
_
600/
650
360
_0,
5538
0_
290
6-8
1000
300
130
0,55
380
_29
0_
1000
300
130
0,55
380
_29
06-
8
Max
dia.
(mm
)N
etwe
ight
(kg)
gap
betw
een
colum
ns(m
m)
noto
ratin
g"T
"nu
ts(m
m)
Stro
keof slide
Air
pres
sure
(bar
)
MO
DEL
DIM
ENSI
ON
STE
CH
NIC
AL
DAT
A
(kw
)(V
)
10
SPECIAL APPLICATIONS
SECIAL APPLICATIONUSING A ROLLERMARKERRoller marking of motorplugs for diesel motors withautomatic loading andunloading. Special toolingwith component fixturing.
MARKING OFFIREEXTINGUISHERBODIESThe sheet metal, after it hasbeen rolled and welded ismarked with the followinginformation:• Supplier’s name• Supplier’s code• Full capacity• Date of manufacture• Sequential serial numberAll this information is markedin one operation using aMB76EP fitted with aspecial numberinghead with typeholderattached.Marking time is lessthan 3 seconds.
High pressure valve bodymarked on a MB 71EP
Roller marker, MB41Ecombined with automaticfeeding system
MARKING OF SAFETYVALVES AND FLANGESAll valves have to be marked
with their own specific details:date, pressure, volume,
manufacturer etc.Certification regulations require
that the valve bodies must bemarked with unalterable data.
Flange marked on aMB 76EP90°
11
The twin roller supports S2R and S2R mini areused on roller marking machines to rotate thepart to be marked.The marking headcauses the part to be rotated during themarking process.
ROLLER SUPPORTS
With support S2R2adjustable, it is possibleto set the two rollersto suit the diameter ofthe parts to be marked.
The supports designed by AutomatorInternational are intended to help theoperator ensure that the force isalways applied equally and that aperfect mark is produced everytime.This is due to the accuracy withwhich every item is designed andtested.
S2R e S2RMignon
S1R e S1RMignon
S2R2Adjustable
We reserve the right to amend specifications whitout notice, you can download the last release on oursite at: http://www.automator.com/Download.asp
12
The manrel supports S1R and S1R mini have been designedspecifically for marking thin-walled tubular components.
This roller support is only used onthe roller marking machine, modelMB71CE, and guides the barthrough the machine forcontinuous marking.The central
lower roller can be engraved toallow marking on two facessimultaneously.
This roller support serves to takethe circular typeholder, type RPC101. It is also possible to fit circulardies of 60mm dia. engraved withspecial logos or text.
S1R 89 175 74 75 / 48 135 26 109 62 52 8 / /
60 98 51 52 4 23 80 18 74 40 30 6 8 /
S2R 80 170 48 42,5 / 44 140 19 64 65 50 13 / / 39
60 100 25 20,2 4 22 80 10 32 40 40 6,5 8 / 19
80 250 65 40 59 119 139 20 / / / / / / 48
S3R MB 71CE 110 170 42 49 / 40 150 20 60 15 70 10 / / 42
SR100 58 73 92 97 67 43 / / 83 / / / / / /
MB 41N - 41EMB 71N - 71E - 71EP
MB 71UE
MB 41N - 41EMB 71N - 71E - 71EP
MB 71UEMB 41N - 41E
MB 71N - 71E - 71EPMB 71UE
MB 41N - 41EMB 71N - 71E - 71EP
MB 71UE
On request
On request
MB 71N - 71E - 71EPMB 71UE
MB 71N - 71E - 71EPMB 71UE
S1RMignon
S2RMignon
S2RAdjustable
Machine model A B C D E F G H I L M N O X e Y Ørollers
Technical data:Type of
supports
SR 100
S3R
13
Mod.TGCompact frame
with eitherlaminated plasticor steel top plate
500x600 mmsuitable for
MB32/35/71N/71E/71CE
Mod.TAdjustable tableheight from700-790 mm.Adjustable foot-restsuitable for
MB15/19/20/21/32/40N
Automator steel types are of exceptional quality,incorporating as they do 50 years’ experience.
They are made from specially selected steel, whichguarantees a long life time.
The most modern production methods ensuresperfect centering and exact dimensional tolerances.Standard font sets with or without a typeholdercontain:• 100 characters• 20 blanks• Tweezers and allen key
1 1,5 2 2,5 3 4 5 6 8 10
Height of standard character sizes
600 mm
830
mm
40 mm
40 mm
600 mm600 mm600 mm
40 mm
h.67
0 m
m m
in.
h.75
0 m
m m
ax
Height of standard character sizes
1 1,5 2 2,5 3 4 5 6 8 10 12 15
ACCESSORIES
FONT SETS
ENGRAVED STAMPS & DIES
TABLES
Types of characters:• standard sharp face• multi-dot• rounded• flat face• hot marking• lower case
Special dies and punches to any shape with perfect representation of logos or script are made to customers’ requirements from special stel.Many years of experience guarantees highest quality and closest tolerances.
745
mm
14
An enormous range of typeholders of both standard andspecial design is available to resolve any markingapplication.The linear 1, 2 and 3 line typeholders as well as the circulartypeholders all are provided with a tapped hole at the rearto take the required spigot. Because of this featureAutomator typeholders canbe mounted on any model ofimpact press or roller marking machine.
These are ideal for marking of frequently changing numbers or sequentially incrementing serial numbers; a numberinghead can be supplied for every character size and shape of component. Special numbering heads with spacer wheels, slotsfor holding interchangeable steel types etc. can be supplied on request.Available as two models:• MB2 automatic• MB14 manual
1 1,5 2 2,5 3 4 5 6 8 10
Height of standard character sizes
NUMBERING HEADS
ADAPTOR PLATES
TYPEHOLDERS
MB 14
MB 2
These serve to attach thetypeholder to the various rollermarking machines.
15
MARKING SYSTEMS
Send us an e-mail to be putted in contact with our nearest specialist in marking
AUTOMATOR INTERNATIONAL s.r.l.Via Meucci, 8 -20094 Corsico (MI) Italy • Tel. + 39-0248601445 r.a. • Fax + 39-0248601503
info@automator.com - www.automator.com
w w w . a u t o m a t o r . c o m
All
data
may
be
chan
ged
with
out
notic
e -
VER
SIO
N 1
0/09
- ©
Cov
er P
hoto
Mr.
G.B
iset
ti
n. 2768 n. IT-28229