Post on 28-Jan-2015
description
transcript
ROLLTEK ENGINEERING WORKS
A SUPPLIER OF ROLLING MILLS SPARES
An Excellence Of Quality
India
Shanta Industrial Estate
I. B. Patel Road, # 37
Goregaon East,
Mumbai- 400063
India
022-66929708
RollTek Engineering Works USA, LLC
Sales / Engineering office
Northville-Michigan
248-756-8626
Provides onsite support
Factory Size: 4,000 sq feet.
Total Sale Annual: Year to date $ 6MConfidential RollTek Engineering Works
Foundries:
Developed Foundry for S.G.I. Castings which meets US Standard.
Morgan (India ) also buys complete requirements .
Facilities for all types of ferrous and non-ferrous castings locally .
Measuring Instruments:
Complete range of Measuring Instruments for manufacturing as well as
for Inspection.
Capability of CMM measurements
Quote Timing:
RollTek Engineering Works provides quotes within 48 to 72 upon
receiving inquiry for an RFQ.
Confidential RollTek Engineering Works
Key Customer:
Several Customers in India
Qatar Steel Company (UAE)
Emirates Steel (UAE)
Gulf Steel (UAE)
Hamriyah Steel (UAE)
Advantages:
Cost Savings.
Part fits to current equipment / with no additional parts needed.
All parts will fit to current Ashlow / Morgan or other manufacturing equipment build types.
REW Roller guides are manufactured from a single piece casting (housing and roller holders) this design provides
with a higher accuracy and a longer lasting part and improved quality.
Other parts Manufactured at site:
Spindles
Conveyor Rollers
Shafts for applications
Non-Ferrous Bushings
Chockes
Liner plates
Sprockets
Gears
Shaft set Fasteners
Spacers (Shims)
Tags
Confidential RollTek Engineering Works
RE-40 SP New designed for better performance and quality (Front View/Side View)
Confidential RollTek Engineering Works
RE -75 with Base
Confidential RollTek Engineering Works
Roller Guide box No RE115 (Side view/Top View)
Confidential RollTek Engineering Works
Roller Guide Box No 210 Conventional type to finish rounds Max190mmDia
Confidential RollTek Engineering Works
Roller Guide box no 0820 Cassette type design with frame to finish rounds max 14mm diameter
Confidential RollTek Engineering Works
Roller guide box no 0820 cassette type with Frame to mount the Roller guide Box on the Rest bar.
Confidential RollTek Engineering Works
Roller Guide Box No 0820 , 0830 & 45. The Guide Box 0820 & 0830 are Cassette type where as Guide box No 45 is the Conventional type. Capacity of 0820 is to finish max dia 14 mm , 0830 to finish 22 mm and box 45 is to finish maximum 35 mm dia.
Confidential RollTek Engineering Works
2 Roller guide box No 0835 (Heavy Duty New Design ) supplied to Qatar Steel Doha
Confidential RollTek Engineering Works
Roller Guide Box No 0845 Cassette design with frame
Confidential RollTek Engineering Works
Roller guide box No 0860 Cassette type with Frame capacity to finish rounds maximum 45 mm diameter.
Confidential RollTek Engineering Works
Front View
Roller guide box No 45 but Conventional type
Confidential RollTek Engineering Works
Same as SR No: 26 but close view from entry side
Confidential RollTek Engineering Works
Roller Guide Box No 85 design Conventional type to finish rounds Max 70 mm Diameter
Confidential RollTek Engineering Works
Roller Guide Box no 125 Special build per customer requirements
Confidential RollTek Engineering Works
Suspended Gear Box Roller Table (Front View/Rear View)
Confidential RollTek Engineering Works
Grooved Hardened and Ground D2 Quality Roller guide box No 0830, 0845, 0860,0885
Confidential RollTek Engineering Works
Grooved Hardened and Ground D2 Quality Roller guide box No 125 and 155
Confidential RollTek Engineering Works
Roughing Mill Twister Roller
Confidential RollTek Engineering Works
Twister roller D2 quality for Roughing and finishing Mill Guide
Confidential RollTek Engineering Works
Slitter Rolls.
Confidential RollTek Engineering Works
Roller for Roller Twister Guide
Confidential RollTek Engineering Works
Conveyor Roller
Confidential RollTek Engineering Works
Pinch Roll on Furnace Delivery Side
Confidential RollTek Engineering Works
Roller for Driven Motor
Confidential RollTek Engineering Works
RE- 25 Inserts SG Iron 500/7
Confidential RollTek Engineering Works
Entry & Exit Guide (Strippers ) for Ovals, Rounds, Preovals, RCS, Squares and Diamond sizes range from 30 mm to 190 mm
Confidential RollTek Engineering Works
Forged CK45 Grade Spindle for 8", 10", 12" 16" 18" 20" Mill
Confidential RollTek Engineering Works
Roller Holder Left & Right side Design guide box no RE113
Confidential RollTek Engineering Works
Roller Holder Left & Right side Design size RE4
Confidential RollTek Engineering Works
Roller holder Design Left & Right Side for Box No 60, 85, 125and 155 (Range)
Confidential RollTek Engineering Works
Design Static Guide with Cartridge to finish rounds From 8mm to 14mm Diameter
Confidential RollTek Engineering Works
Finishing Mill Water Box Air Stripper (Nozzle)
Confidential RollTek Engineering Works
Twist Pipes
Confidential RollTek Engineering Works
Spiral Bevel Gear & Pinion
Confidential RollTek Engineering Works