Post on 12-Jun-2018
transcript
SANDWICH PANEL CONTAINER TECHNICAL SPECIFICATIONS
PRODUCTION Special production sandwich panel living containers
MATERIAL Metal material between 2mm and 4mm + box profile
PRODUCTION DIMENSIONS
Container frame dimension
3600x1200x2500 mm(wxlxh)
METAL PARTS Zinc coated steel-DIN EN 10142-00
Building dimension after assembling
3600x12000x2500 mm(wxlxh)
CEMENT BOARD DIN EN 634-2-EQV-B1 Fire class resistant
Page no : 1
Package type Flatpack POLYSTYRENE FOAM (EPS) DIN EN 13163-E1 Fire class resistant
TECHNICAL DATA
Earthquake conditions
1st Degree earthquake conditions
TRANSMISSION COEFFICIENT OF EXTERNAL WALL
0,034 kcal/mh°C
Climate conditions
Suitable for 3rd climate zone
ROOF TRANSMISSION COEFFICIENT
0,034 kcal/mh°C
Snow load 100 Kg/m²FLOOR HEAT TRANSFER COEFFICIENT
K:0.68 kcal/mh°C
Wind speed 102 Km/hCHASSIS LOADING CAPACITY
200 Kg/m²
FLOOR SystemSpecial shaped metal materials with roolform and cutting/bend machines. Preparation is with welding in the Factory, and installation is with self tapping screw
Page no : 2
Floor coating 40mm and 30 dansite sandwich panel fixed to 10mm cement board
Bathroom Floor covering (Only included models)
2.5 mm thick PVC vinyl
Main floor covering
2.5 mm thick PVC vinyl
WALLS System 50mm thick 30mm kg/m3 Special shaped EPS filled sandwich panel
Outer surface covering
Ral 9006 electrostatic painted steel sheet.
Inner surface covering
Ral 9006 electrostatic painted steel sheet.
Wall Insulation
50 mm thick 30 kg/m³ polystyrene foam (EPS) E1 fire class fire resistant, full thermal insulation, healthy and safety is guaranteed by our materials.
Page no : 3
ROOF
Roof system 50mm thick 30kg/m3 sandwich panel with EPS insulation.
Roof insulation
50 mm thick 30 kg/m³ polystyrene foam (EPS) E1 fire class resistant, full thermal insulation, healthy and safety is guaranteed by our materials.
Outer surface covering
Ral 9006 electrostatic powder painted steel sheet.
Inner surface covering
Ral 9006 electrostatic powder painted steel sheet.
DOORS
External door Made of 40 mm thick sandwich panel. Frame is PVC profile
Internal door (Only included models)
American panel doors
Page no : 4
Bathroom door (Only included models)
American panel doors
WINDOWS
Main 90x110 cm PVC window. Windows are single wing and open toward inside
Frame PVC frames
Bathroom Window (Only included models)
60x40 cm PVC window. Windows are single wing and open toward upside
Glass 4+11+4 mm Double glazing
Page no : 5
PAINTING
Exterior Sandwich panel sheets are painted with Ral 9006 electrostatic powder paint
Metal parts All metal parts are painted with Ral 9005 electrostatic powder paint
ELECTRIC INSTALLATIONS
System On the plaster
Page no : 6
CablesElectric power 2000 W 220 Volt. Socket cable 3x2,5 NYM, Lightening cables 2x1,5 NYM TSE certified first class brands
Ventilation Only includedmodels)
Air ventilation for the Bathroom or Kitchen sink.
Lighting fixtures
TSE certified first class round shaped glob armatures
Plugs and switches
TSE certified first class switch and socket is available in each room. Fuse box and circuit breakeris included.
Page no : 7
SANITARY INSTALLATIONS (ONLY INCLUDED MODELS)
System On the plaster
Sanitary fittings
TSE certified first class brands
Closet &Shower Tray & Shower Curtain & Wash Basin & Paper Holder & Soap Holder & Mirror
TSE certified first class brands
Clean water pipes
TSE certified first class brands
Page no : 8
Waste water pipes
TSE certified first class brands
PACKAGE SystemThe corner beams, top and bottom frame, wall and roof panels, door and window, electricity and equipments will be collected as a flatpack box.
SHIPPING System The lifting operation will be completed via specially shaped brackets and columns.
Page no : 9