Post on 01-Sep-2020
transcript
Assessment Manager: AP2 Page 1 of 23
Schedule of Accreditation issued by
United Kingdom Accreditation Service
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
10169
Accredited to ISO/IEC 17025:2017
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Efectis UK/Ireland Limited
Shore Road
Jordanstown
BT37 0QB
Contact: Mr. Talal Fateh
Tel: +44 (0)2890368766
E-Mail: talal@efectis.com
Website: http://efectis.com
Testing performed by the Organisation at the locations specified
Locations covered by the organisation and their relevant activities
Laboratory locations:
Location details Activity Location code
Address Shore Road Jordanstown BT37 0QB
Local contact Mr. Talal Fateh
Resistance to fire tests and Reaction to fire tests
Jordanstown
Address Unit 15F, Kilroot Business Park, Larne Road, Carrickfergus, BT38 7PR
Local contact Mr. Talal Fateh
Reaction to fire tests Carrickfergus
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 2 of 23
DETAIL OF ACCREDITATION
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used Location
BUILDING ELEMENTS GENERAL
Resistance to fire tests
General principles General requirements Alternative and general requirements
BS 476:Part 20:1987 BS EN 1363-1:2020 BS EN 1363-1:2012(Withdrawn) BS EN 1363-2:1999
Jordanstown Jordanstown Jordanstown
STRUCTURAL MEMBERS Resistance to fire tests Horizontal protective
membranes. EN 13381-1:2014 Jordanstown
Vertical protective membranes. EN 13381-2:2014 Jordanstown Applied protection to concrete
members. EN 13381-3:2015 Jordanstown
Applied protection to steel
members. EN 13381-4:2013 Jordanstown
Applied protection to
concrete/profiled sheet steel composite members.
EN 13381-5:2014 Jordanstown
Applied protection to concrete
filled hollow steel columns. EN 13381-6:2012 Jordanstown
Applied protection to timber
members. EN 13381-7:2019 Jordanstown
Applied reactive protection to
steel members. EN 13381-8:2013 Jordanstown
Applied protection systems to
steel beams with web openings. EN 13381-9:2015 Jordanstown
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 3 of 23
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used Location
NON-LOADBEARING ELEMENTS
Resistance to fire tests
Partitions. BS 476-22:1987 - Clause 5 Jordanstown Fully insulated door sets and
shutter assemblies. BS 476-22:1987 - Clause 6 Jordanstown
Partially insulated door sets and
shutter assemblies. BS 476-22:1987 - Clause 7 Jordanstown
Uninsulated door sets and
shutter assemblies. BS 476-22:1987 - Clause 8 Jordanstown
Glazed elements. BS 476-22:1987 - Clause 10 Jordanstown Non-loadbearing Walls. EN 1364-1:2015 Jordanstown Ceilings EN 1364-2:2018 Jordanstown Curtain walling - Full
configuration (complete assembly).
EN 1364-3:2014 Jordanstown
Curtain walling - Part
configuration. EN 1364-4:2014 Jordanstown
Doors, shutters, and openable
windows. EN 1634-1:2014+A1:2018 Jordanstown
Coverings. EN 14135:2004 Jordanstown LOAD BEARING ELEMENTS
Resistance to fire tests
Loadbearing Walls. EN 1365-1:2012 + AC Jordanstown Floors and roofs. EN 1365-2:2014 Jordanstown Beams. EN 1365-3:1999 Jordanstown Beams. BS 476-21:1987 - Clause 5 Jordanstown Walls. BS 476-21:1987 - Clause 8 Jordanstown
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 4 of 23
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used Location
LOAD BEARING ELEMENTS (Cont)
Fire resistance tests for loadbearing elements. Determination of the fire resistance of floors and flat roofs
BS 476-21:1987 clause 7 Jordanstown
SERVICE INSTALLATIONS
Resistance to fire tests
Penetration seals EN 1366-3:2009 Jordanstown Linear joint seals - not including
Annex B. BS EN 1366-4:2006+A1:2010 Jordanstown
SMOKE AND HEAT CONTROL SYSTEMS
Resistance to fire tests
Smoke barriers EN 12101-1:2005 - Appendix D Jordanstown Natural smoke and heat
exhaust ventilators EN 12101-2:2017 - Appendix G Jordanstown
CLASSIFICATION STANDARD
Resistance to fire tests
Classification using test data
from fire resistance tests, excluding ventilation services
EN 13501-2:2016 Jordanstown
Classification using test data
from fire resistance tests. EN 13501-4:2016 Jordanstown
Classification using test data
from fire resistance tests BS 476-8:1972 Jordanstown
BUILDING MATERIALS/PRODUCTS
Reaction to fire tests
Full-scale room tests for surface
products. ISO 9705-1:2016 Jordanstown
Determination of the ignitability
of products by direct small flame impingement under zero impressed irradiance.
EN ISO 11925-2:2020 Jordanstown
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 5 of 23
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used Location
BUILDING MATERIALS/PRODUCTS (Cont)
Building products excluding floorings exposed to the thermal attack by a single burning item
EN 13823:2020 Jordanstown
BUILDING MATERIALS/PRODUCTS
Fire performance of external cladding systems. Test method for non-loadbearing external cladding systems applied to the masonry face of a building.
BS8414-1:2020 BS 8414-1:2015+A1:2017 (Withdrawn)
Jordanstown Carrickfergus
Fire performance of external
cladding systems. Test method for non-loadbearing external cladding systems fixed to and supported by a structural steel frame.
BS8414-2:2020 BS 8414-2:2015+A1:2017 (Withdrawn)
Jordanstown Carrickfergus
Reaction-to-fire tests -- Heat
release, smoke production and mass loss rate -- Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement).
BS ISO 5660-1/A1:2018 Jordanstown
Reaction to fire tests. Tests for
facades. Intermediate scale test.
ISO 13785-1:2002 Jordanstown
CLASSIFICATION STANDARD
Reaction to fire tests
Classification using test data
from reaction to fire tests. EN 13501-1: 2018 Jordanstown
Fire performance of external
thermal insulation for walls of multi-storey buildings.
BRE 135:2013 Jordanstown
END
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 6 of 23
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment Procedure /
Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020
Annex V - Testing Laboratory (AVCP) System 3
95/467/EC Gypsum products (1/4) : - Plasterboards and ceiling elements with thin laminations, fibrous gypsum boards, fibrous gypsum plaster casts, and composite panels (laminates), in which the incorporated material is placed on a face susceptible to be exposed to fire, including relevant ancillary products (in walls, partitions or ceilings (or lining thereof) subject to reaction to fire requirements).
EN 13658-1:2005 EN 13815:2006 EN 13950:2014 EN 13963:2005 EN 13963:2005/AC:2006 EN 14190:2014 EN 14209:2017 EN 14353:2007+A1:2010 EN 14496:2005 EN 520:2004+A1:2009 EN 15283-1:2008+A1:2009 EN 15283-2:2008+A1:2009
Annex V - Testing Laboratory (AVCP) System 3
95/467/EC Gypsum products (2/4): - Plasterboards, blocks, ceiling elements and gypsum plasters, fibrous gypsum plasters casts, including relevant ancillary products (in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings).
EN 12859:2011 EN 12860:2001 EN 12860:2001/AC:2002 EN 13279-1:2008 EN 14195:2005 EN 14195:2005/AC:2006 EN 520:2004+A1:2009 EN 14246:2006
Annex V - Testing
Laboratory (AVCP) System 3
96/580/EC Curtain wallings (1/1): - Curtain wall kits (as external walls subject to reaction to fire requirements).
EN 13830:2003
Annex V - Testing
Laboratory (AVCP) System 3
97/462/EC Wood-based panels (2/2): - Unfaced, overlaid and veneered or coated wood-based panels (for non-structural elements in internal or external applications).
EN 13986:2004+A1:2015
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 7 of 23
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment Procedure /
Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Annex V - Testing Laboratory (AVCP) System 3
97/740/EC Masonry and related products (3/3) : - Masonry units incorporating thermal insulating materials placed on a face susceptible to be exposed to fire (in walls and partitions subject to reaction to fire regulations).
EN 15824:2017
Annex V - Testing Laboratory (AVCP) System 3
97/808/EC Floorings (2/2) : - Rigid flooring products: (a) Components: paving units, tiles, mosaics, parquet, decking of mesh or sheet, floor gratings, rigid laminated floorings, wood based products (for internal uses including enclosed public transport premises).
EN 12057:2004
Annex V - Testing Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (1/6) : - Factory-bonded composite or sandwich panels (for uses subject to resistance to fire regulations (e.g. fire compartmentation)).
EN 14509:2013
Annex V - Testing
Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (1/6) : - Flat and profiled sheets (for uses subject to resistance to fire regulations (e.g. fire compartmentation)).
EN 534:2006+A1:2010
Annex V - Testing
Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (1/6) : - Rooflights (for uses subject to resistance to fire regulations (e.g. fire compartmentation)).
EN 1873:2005 EN 14963:2006
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 8 of 23
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment Procedure /
Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Annex V - Testing Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (2/6) : - Flat and profiled sheets (for uses subject to reaction to fire regulations).
EN 494:2012+A1:2015
Annex V - Testing Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (2/6): - Roofing tiles, slates, stones and shingles (for uses subject to reaction to fire regulations).
EN 1304:2005 EN 490: 2011 EN 492:2012 EN 544:2011 EN 1873:2005 EN 14964:2006
Annex V - Testing Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (2/6): - Flat and profiled sheets (for uses subject to reaction to fire regulations).
EN 1013:2012+A1:2014
Annex V - Testing
Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (3/6): - Flat and profiled sheets (for uses subject to external fire performance regulations).
EN 494:2012+A1:2015 EN 16153:2013+A1:2015
Annex V - Testing
Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (3/6): - Roofing tiles, slates, stones and shingles (for uses subject to external fire performance regulations).
EN 1304:2005 EN 490: 2011 EN 492:2012 EN 544:2011
Annex V - Testing
Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (3/6): - Rooflights (for uses subject to external fire performance regulations).
EN 1873:2005
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 9 of 23
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment Procedure /
Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Annex V - Testing Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (1/5): Suspended ceilings (kits) (as internal or external finishes used for fire protection of ceilings).
EN 13964:2014
Annex V - Testing Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (1/5): - Panels (as internal or external finishes, as complete elements, used for fire protection of walls or ceilings).
EN 438-7:2005
Annex V - Testing Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (3/5) : - Shingles (as external finishes in walls or ceilings subject to reaction to fire regulations).
EN 12467:2012
Annex V - Testing
Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (3/5): - Sidings (as internal or external finishes in walls or ceilings subject to reaction to fire regulations).
EN 13245-2:2008 EN 13245-2:2008/AC:2009 EN 14915:2013
Annex V - Testing
Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (3/5): Coverings in roll form (as internal finishes in walls or ceilings subject to reaction to fire regulations).
EN 14716:2004 EN 15102:2007+A1:2011
Annex V - Testing
Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (3/5): Suspended ceilings (kits) (as internal or external finishes in ceilings subject to reaction to fire regulations).
EN 13964:2014
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 10 of 23
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment Procedure /
Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Annex V - Testing Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (3/5): Cladding slabs (as external finishes in walls or ceilings subject to reaction to fire regulations).
EN 1469:2015 EN 14783:2013
Annex V - Testing Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (3/5): - Panels (as internal or external finishes in walls or ceilings subject to reaction to fire regulations).
EN 438-7:2005
Annex V - Testing Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (3/5) : - Tiles (as internal or external finishes in walls or ceilings subject to reaction to fire regulations).
EN 15286:2013
Annex V - Testing Laboratory (AVCP) System 3
99/90/EC Membranes (2/3): - Damp proofing sheets (for uses subject to reaction to fire regulations).
EN 13967:2012 EN 13969:2004 EN 13969:2004/A1:2006
Annex V - Testing
Laboratory (AVCP) System 3
99/90/EC Membranes (2/3): - Roof underlays (for uses subject to reaction to fire regulations).
EN 13859-1:2010
Annex V - Testing
Laboratory (AVCP) System 3
99/90/EC Membranes (2/3): - Roof sheets (for uses subject to reaction to fire regulations)
EN 13707:2004+A2:2009 EN 13956:2012
Annex V - Testing
Laboratory (AVCP) System 3
99/90/EC Membranes (2/3): - Water vapour control layers (for uses subject to reaction to fire regulations).
EN 13859-2:2010 EN 13970:2004 EN 13970:2004/A1:2006 EN 13984:2013
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 11 of 23
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment Procedure /
Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Annex V - Testing Laboratory (AVCP) System 3
99/90/EC Membranes (2/3): - Damp proof courses (for uses subject to reaction to fire regulations).
EN 14909:2012 EN 14967:2006
Annex V - Testing Laboratory (AVCP) System 3
99/90/EC Membranes (3/3) : - Roof sheets (for uses subject to external fire performance regulations)
EN 13707:2004+A2:2009 EN 13956:2012
Annex V - Testing Laboratory (AVCP) System 3
99/91/EC Thermal insulating products (2/2): - Thermal insulating products (factory-made products and products intended to be formed in-situ) (for uses subject to regulations on reaction to fire).
EN 13162:2012 + A1:2015 EN 13163:2012 + A1:2015 EN 13164:2012 + A1:2015 EN 13165:2012 + A2:2016 EN 13166:2012 + A2:2016 EN 13167:2012 + A1:2015 EN 13168:2012 + A1:2015 EN 13169:2012 + A1:2015 EN 13170:2012 + A1:2015 EN 13171:2012 + A1:2015 EN 14063-1:2004 EN 14063-1:2004/AC:2006 EN 14064-1:2010 EN 14303:2009+A1:2013 EN 14304:2009+A1:2013 EN 14305:2009+A1:2013 EN 14306:2009+A1:2013 EN 14307:2009+A1:2013 EN 14308:2009+A1:2013 EN 14309:2009+A1:2013 EN 14313:2009+A1:2013 EN 14314:2009+A1:2013 EN 14315-1:2013 EN 14316-1:2004 EN 14317-1:2004 EN 14318-1:2013 EN 14319-1:2013 EN 14320-1:2013 EN 14933:2007 EN 14934:2007 EN 15501:2013 EN 15599-1:2010 EN 15600-1:2010 EN 15732:2012
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 12 of 23
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment Procedure /
Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Annex V - Testing Laboratory (AVCP) System 3
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Doors and gates (with or without related hardware) (other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use (i.e. NOT for fire/smoke compartmentation, NOT for escape routes)).
EN 14351-1:2006+A2:2016
Annex V - Testing Laboratory (AVCP) System 3
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Windows (with or without related hardware) (any other).
EN 14351-1:2006+A2:2016
Annex V - Testing Laboratory (AVCP) System 3
99/469/EC Products related to concrete, mortar and grout (2/2) : Concrete protection and repair products (for uses subject to reaction to fire regulations).
EN 1504-2:2004 EN 1504-3:2005 EN 1504-4:2004 EN 1504-6:2006
Annex V - Testing
Laboratory (AVCP) System 3
99/470/EC Construction adhesives (2/2) : - Adhesives for tiles (for uses subject to reaction to fire regulations).
EN 12004:2007+A1:2012
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 13 of 23
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment Procedure /
Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Annex V - Testing Laboratory (AVCP) System 3
2000/245/EC Flat glass, profiled glass and glass-block products (2/6) : Flat or curved glass panels (for uses subject to reaction to fire regulations).
EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 1279-5:2005+A2:2010 EN 13024-2:2004 EN 14178-2:2004 EN 14179-2:2005 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004
Annex V - Testing Laboratory (AVCP) System 3
2000/245/EC Flat glass, profiled glass and glass-block products (2/6) : Insulating glass units (for uses subject to reaction to fire regulations).
EN 1279-5:2005+A2:2010
Annex V - Testing
Laboratory (AVCP) System 3
2000/245/EC Flat glass, profiled glass and glass-block products (3/6) : Flat or curved glass panels (for uses subject to external fire performance regulations).
EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 13024-2:2004 EN 14178-2:2004 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004
Annex V - Testing
Laboratory (AVCP) System 3
2000/245/EC Flat glass, profiled glass and glass-block products (3/6) : Insulating glass units (for uses subject to external fire performance regulations).
EN 1279-5:2005+A2:2010
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 14 of 23
Accreditation for the purpose of UK Approved Body Activity in accordance with UKCA Requirements and UKAS Publication GEN 5
Directive / Regulation
Conformity Assessment Procedure / Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Annex V - Testing Laboratory (AVCP) System 3
2011/19/EU Sealants for non-structural use in joints in buildings and pedestrian walkways (1/2) : - Sealants for external walls (outdoor applications).
EN 15651-1:2012
Annex V - Testing Laboratory (AVCP) System 3
2011/19/EU Sealants for non-structural use in joints in buildings and pedestrian walkways (2/2) : - Sealants for non-structural use in joints in buildings and pedestrian walkways (for uses subject to reaction to fire regulations).
EN 15651-1:2012
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 15 of 23
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment Procedure /
Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020
Annex V - Testing Laboratory (AVCP) System 3
95/467/EC Gypsum products (1/4) : - Plasterboards and ceiling elements with thin laminations, fibrous gypsum boards, fibrous gypsum plaster casts, and composite panels (laminates), in which the incorporated material is placed on a face susceptible to be exposed to fire, including relevant ancillary products (in walls, partitions or ceilings (or lining thereof) subject to reaction to fire requirements).
EN 13658-1:2005 EN 13815:2006 EN 13950:2014 EN 13963:2005 EN 13963:2005/AC:2006 EN 14190:2014 EN 14209:2017 EN 14353:2007+A1:2010 EN 14496:2005 EN 520:2004+A1:2009 EN 15283-1:2008+A1:2009 EN 15283-2:2008+A1:2009
Annex V - Testing Laboratory (AVCP) System 3
95/467/EC Gypsum products (2/4): - Plasterboards, blocks, ceiling elements and gypsum plasters, fibrous gypsum plasters casts, including relevant ancillary products (in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings).
EN 12859:2011 EN 12860:2001 EN 12860:2001/AC:2002 EN 13279-1:2008 EN 14195:2005 EN 14195:2005/AC:2006 EN 520:2004+A1:2009 EN 14246:2006
Annex V - Testing
Laboratory (AVCP) System 3
96/580/EC Curtain wallings (1/1): - Curtain wall kits (as external walls subject to reaction to fire requirements).
EN 13830:2003
Annex V - Testing
Laboratory (AVCP) System 3
97/462/EC Wood-based panels (2/2): - Unfaced, overlaid and veneered or coated wood-based panels (for non-structural elements in internal or external applications).
EN 13986:2004+A1:2015
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 16 of 23
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment Procedure /
Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Annex V - Testing Laboratory (AVCP) System 3
97/740/EC Masonry and related products (3/3) : - Masonry units incorporating thermal insulating materials placed on a face susceptible to be exposed to fire (in walls and partitions subject to reaction to fire regulations).
EN 15824:2017
Annex V - Testing Laboratory (AVCP) System 3
97/808/EC Floorings (2/2) : - Rigid flooring products: (a) Components: paving units, tiles, mosaics, parquet, decking of mesh or sheet, floor gratings, rigid laminated floorings, wood based products (for internal uses including enclosed public transport premises).
EN 12057:2004
Annex V - Testing Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (1/6) : - Factory-bonded composite or sandwich panels (for uses subject to resistance to fire regulations (e.g. fire compartmentation)).
EN 14509:2013
Annex V - Testing
Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (1/6) : - Flat and profiled sheets (for uses subject to resistance to fire regulations (e.g. fire compartmentation)).
EN 534:2006+A1:2010
Annex V - Testing
Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (1/6) : - Rooflights (for uses subject to resistance to fire regulations (e.g. fire compartmentation)).
EN 1873:2005 EN 14963:2006
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 17 of 23
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment Procedure /
Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020
Annex V - Testing Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (2/6) : - Flat and profiled sheets (for uses subject to reaction to fire regulations).
EN 494:2012+A1:2015
Annex V - Testing Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (2/6): - Roofing tiles, slates, stones and shingles (for uses subject to reaction to fire regulations).
EN 1304:2005 EN 490: 2011 EN 492:2012 EN 544:2011 EN 1873:2005 EN 14964:2006
Annex V - Testing Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (2/6): - Flat and profiled sheets (for uses subject to reaction to fire regulations).
EN 1013:2012+A1:2014
Annex V - Testing
Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (3/6): - Flat and profiled sheets (for uses subject to external fire performance regulations).
EN 494:2012+A1:2015 EN 16153:2013+A1:2015
Annex V - Testing
Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (3/6): - Roofing tiles, slates, stones and shingles (for uses subject to external fire performance regulations).
EN 1304:2005 EN 490: 2011 EN 492:2012 EN 544:2011
Annex V - Testing
Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (3/6): - Rooflights (for uses subject to external fire performance regulations).
EN 1873:2005
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 18 of 23
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment Procedure /
Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Annex V - Testing Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (1/5): Suspended ceilings (kits) (as internal or external finishes used for fire protection of ceilings).
EN 13964:2014
Annex V - Testing Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (1/5): - Panels (as internal or external finishes, as complete elements, used for fire protection of walls or ceilings).
EN 438-7:2005
Annex V - Testing Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (3/5) : - Shingles (as external finishes in walls or ceilings subject to reaction to fire regulations).
EN 12467:2012
Annex V - Testing
Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (3/5): - Sidings (as internal or external finishes in walls or ceilings subject to reaction to fire regulations).
EN 13245-2:2008 EN 13245-2:2008/AC:2009 EN 14915:2013
Annex V - Testing
Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (3/5): Coverings in roll form (as internal finishes in walls or ceilings subject to reaction to fire regulations).
EN 14716:2004 EN 15102:2007+A1:2011
Annex V - Testing
Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (3/5): Suspended ceilings (kits) (as internal or external finishes in ceilings subject to reaction to fire regulations).
EN 13964:2014
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 19 of 23
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment Procedure /
Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Annex V - Testing Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (3/5): Cladding slabs (as external finishes in walls or ceilings subject to reaction to fire regulations).
EN 1469:2015 EN 14783:2013
Annex V - Testing Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (3/5): - Panels (as internal or external finishes in walls or ceilings subject to reaction to fire regulations).
EN 438-7:2005
Annex V - Testing Laboratory (AVCP) System 3
98/437/EC Internal and external wall and ceiling finishes (3/5) : - Tiles (as internal or external finishes in walls or ceilings subject to reaction to fire regulations).
EN 15286:2013
Annex V - Testing Laboratory (AVCP) System 3
99/90/EC Membranes (2/3): - Damp proofing sheets (for uses subject to reaction to fire regulations).
EN 13967:2012 EN 13969:2004 EN 13969:2004/A1:2006
Annex V - Testing
Laboratory (AVCP) System 3
99/90/EC Membranes (2/3): - Roof underlays (for uses subject to reaction to fire regulations).
EN 13859-1:2010
Annex V - Testing
Laboratory (AVCP) System 3
99/90/EC Membranes (2/3): - Roof sheets (for uses subject to reaction to fire regulations)
EN 13707:2004+A2:2009 EN 13956:2012
Annex V - Testing
Laboratory (AVCP) System 3
99/90/EC Membranes (2/3): - Water vapour control layers (for uses subject to reaction to fire regulations).
EN 13859-2:2010 EN 13970:2004 EN 13970:2004/A1:2006 EN 13984:2013
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 20 of 23
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment Procedure /
Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Annex V - Testing Laboratory (AVCP) System 3
99/90/EC Membranes (2/3): - Damp proof courses (for uses subject to reaction to fire regulations).
EN 14909:2012 EN 14967:2006
Annex V - Testing Laboratory (AVCP) System 3
99/90/EC Membranes (3/3) : - Roof sheets (for uses subject to external fire performance regulations)
EN 13707:2004+A2:2009 EN 13956:2012
Annex V - Testing Laboratory (AVCP) System 3
99/91/EC Thermal insulating products (2/2): - Thermal insulating products (factory-made products and products intended to be formed in-situ) (for uses subject to regulations on reaction to fire).
EN 13162:2012 + A1:2015 EN 13163:2012 + A1:2015 EN 13164:2012 + A1:2015 EN 13165:2012 + A2:2016 EN 13166:2012 + A2:2016 EN 13167:2012 + A1:2015 EN 13168:2012 + A1:2015 EN 13169:2012 + A1:2015 EN 13170:2012 + A1:2015 EN 13171:2012 + A1:2015 EN 14063-1:2004 EN 14063-1:2004/AC:2006 EN 14064-1:2010 EN 14303:2009+A1:2013 EN 14304:2009+A1:2013 EN 14305:2009+A1:2013 EN 14306:2009+A1:2013 EN 14307:2009+A1:2013 EN 14308:2009+A1:2013 EN 14309:2009+A1:2013 EN 14313:2009+A1:2013 EN 14314:2009+A1:2013 EN 14315-1:2013 EN 14316-1:2004 EN 14317-1:2004 EN 14318-1:2013 EN 14319-1:2013 EN 14320-1:2013 EN 14933:2007 EN 14934:2007 EN 15501:2013 EN 15599-1:2010 EN 15600-1:2010 EN 15732:2012
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 21 of 23
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment Procedure /
Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Annex V - Testing Laboratory (AVCP) System 3
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Doors and gates (with or without related hardware) (other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use (i.e. NOT for fire/smoke compartmentation, NOT for escape routes)).
EN 14351-1:2006+A2:2016
Annex V - Testing Laboratory (AVCP) System 3
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Windows (with or without related hardware) (any other).
EN 14351-1:2006+A2:2016
Annex V - Testing Laboratory (AVCP) System 3
99/469/EC Products related to concrete, mortar and grout (2/2) : Concrete protection and repair products (for uses subject to reaction to fire regulations).
EN 1504-2:2004 EN 1504-3:2005 EN 1504-4:2004 EN 1504-6:2006
Annex V - Testing
Laboratory (AVCP) System 3
99/470/EC Construction adhesives (2/2) : - Adhesives for tiles (for uses subject to reaction to fire regulations).
EN 12004:2007+A1:2012
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 22 of 23
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment Procedure /
Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020 (cont’d)
Annex V - Testing Laboratory (AVCP) System 3
2000/245/EC Flat glass, profiled glass and glass-block products (2/6) : Flat or curved glass panels (for uses subject to reaction to fire regulations).
EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 1279-5:2005+A2:2010 EN 13024-2:2004 EN 14178-2:2004 EN 14179-2:2005 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004
Annex V - Testing Laboratory (AVCP) System 3
2000/245/EC Flat glass, profiled glass and glass-block products (2/6) : Insulating glass units (for uses subject to reaction to fire regulations).
EN 1279-5:2005+A2:2010
Annex V - Testing
Laboratory (AVCP) System 3
2000/245/EC Flat glass, profiled glass and glass-block products (3/6) : Flat or curved glass panels (for uses subject to external fire performance regulations).
EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 13024-2:2004 EN 14178-2:2004 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004
Annex V - Testing
Laboratory (AVCP) System 3
2000/245/EC Flat glass, profiled glass and glass-block products (3/6) : Insulating glass units (for uses subject to external fire performance regulations).
EN 1279-5:2005+A2:2010
10169
Accredited to
ISO/IEC 17025:2017
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Che r t sey Lane , S ta ines -upon -Thames , TW18 3HR, UK
Efectis UK/Ireland Limited
Issue No: 007 Issue date: 18 December 2020
Testing performed by the Organisation at the locations specified
Assessment Manager: AP2 Page 23 of 23
Accreditation for the purpose of Notified Body Activity relating to the Northern Ireland market (CE + UKNI) taking into account EA-2/17
Directive / Regulation
Conformity Assessment Procedure / Module / Article
Category of Products or Individual Products
Essential Requirements: Product Specification / Properties / Standards
Construction Products Regulation 2011 (retained EU law EUR 305/2011) as amended by the Construction Products (Amendment etc.) (EU Exit) Regulations 2019 and the Construction Products (Amendment etc.) (EU Exit) Regulations 2020. (cont’d)
Annex V - Testing Laboratory (AVCP) System 3
2011/19/EU Sealants for non-structural use in joints in buildings and pedestrian walkways (1/2) : - Sealants for external walls (outdoor applications).
EN 15651-1:2012
Annex V - Testing Laboratory (AVCP) System 3
2011/19/EU Sealants for non-structural use in joints in buildings and pedestrian walkways (2/2) : - Sealants for non-structural use in joints in buildings and pedestrian walkways (for uses subject to reaction to fire regulations).
EN 15651-1:2012
END