Post on 18-Jun-2020
transcript
Scrap Processing & Recycling Equipment
Mobile shear baler combinations
E-V1 2008
Process your material where it is and not where your equipment is! In the world of scrap metal scrap processing, equipment value and capability are essential to a profitable business, and the Sierra mobile equipment range delivers on both counts. Our whole mobile series of shear baler and loggers is perfectly sized for cost conscious operators. From its rugged self framed construction, to its automated operating cycles, the Sierra mobile range incorporates features found in machines much more costly. Our highly efficient hydraulic and power unit allow our customers to prepare their material with a low cost per ton ratio. Self mobile equipment allows for local on site operation where the equipment is brought to the material and not vice versa, saving considerable amounts in transportation costs and speeding up the whole process.
General description
Power unit
The most advanced Sierra technology enables us to reach high production levels with relatively small engines. Low fuel consump-tion translates into lower processing costs and therefore into higher margins!
The Sierra power unit is diesel driven on all mobile machines.
Power unit per model
S555 SLK S556 SLK S500 R S715 SLK
Engine brand CUMMINS CUMMINS CUMMINS CUMMINS
Power 190 HP 190 HP 190 HP 220 HP
Fuel tank 400 l 400 l 400 l 400 l
The sound of silence All Sierra power packs on the mobile range can be equipped with an optional sound proofing pack. This system reduces noise emissions to less than 95 dba.
Hydraulic unit
The most advanced components and top of the line pumps are used on all Sierra hydraulic units. This technology enables us to use relatively small engines assuring impressive production levels. Sierra uses combinations of variable displacement pumps for high pressure with vane pumps for high speed. This combination has proven to be very efficient and has been adopted on the vast majority of our products
Controlled power The distributor is PLC controlled for optimum and constantly controlled performance.
Hydraulic unit per model
S555 SLK S556 SLK S500 R S715 SLK
Piston pumps 1 1 1 1
Vane pumps 1 1 1 1
Working pressure 320 BAR 320 BAR 320 BAR 350 BAR
Pressure relief system YES YES YES YES
Oil tank capacity 1.400 l 1.400 l 1.400 l 1.400 l
Oil cooling YES YES YES YES
Oil heating Optional Optional YES Optional
Filtration 10 micron YES YES YES YES
Structure
Shearhead, holddown and charging box
S555 SLK S556 SLK S500 R S715 SLK
Shear force, tons/kN 550/4900 550/4900 550/4900 715/6360
Hold down force, tons/kN 85/790 85/790 100/890 85/750
Blade width, mm 870 870 850 870
Shear throat, mm 850 x 700 850 x 700 815/600 850 x 700
Shear auto lube Option Option YES Option
Box length, mm 5.000 6.000 5.000 6.000
Bale size, mm 800 x 650 800 x 650 800 x 600 800 x 650
Feed cylinder, tons/kN 165/1470 165/1470 165/1470 165/1470
Flat lid force, tons/kN 185/1645 220/1960 210/1870 220/1960
Curved lid force, tons/kN 185/1645 220/1960 210/1870 220/1960
Cilinders flat lid 2 3 3 3
Cilinders curved lid 2 3 3 3
Structure
Power through unique simplicity The curved door design assures a bigger charging volume than any other competing machine. This translates into higher production capacity.
Control unit
Cabin or no cabin, what’s the problem? Sierra’s mobile shear range can be delivered with or without control cabin. Both options can be equipped with an optional remote control which ensures a true one man operation. Sierra uses Allen Bradley computers (Rockwell group). Their unparalleled superiority has proven to be the most reliable in this industry. These computers are particularly well suited for the scrap yard environment where vibrations, dirt, dust and humidity prove to be fatal for most other systems.
Remote control
Operating cycles
Automatic baling cycle, with automatic bale eject Automatic logging cycle, with automatic log eject Automatic shearing cycle
Productivity
Only a true multidimensional machine can do it all. One machine, three products, one operator
Shearing Baling Logging
Productivity
S555 SLK S556 SLK S500 R S715 SLK
Cutting capacity, tons 9-13 9-14 9-15 9-16
Round(1), mm 120 120 120 15
Square(1), mm 105 105 105 130
Plate(1), mm 65 x 800 65 x 800 65 x 800 70 x 800
H-Beams, mm 3 x 300 3 x 300 3 x 300 5 x 300
Baling capacity, tons 7-14 7-14 8-14 7-15
Logging capacity, tons 7-14 7-14 8-15 7-15
Bale and log size, mm 800 x 650 800 x 650 800 x 600 800 x 650
Average bale density 1.000 kg/m3 1.000 kg/m3 1.100 kg/m3 1.000 kg/m3
Average log density 450 kg/m3 450 kg/m3 450 kg/m3 450 kg/m3
Nr. of strokes 1/min 5,5 5,5 6 5,5
Strokes with 600 mm cuts 3,5 3,5 3.5-4 3-4
1. Steel 360 N/mm2
Only a Sierra offers a semi mobile product able to replace three different machines. In this competitive market flexibility means beating the competition!
Dimensions and weight
A
G
B
C
H
Dimensions and weight of machine including trailer
S555 SLK S556 SLK S500 R S715 SLK
A—Height 4.050 4.050 4.000 4.100
B—Length (transport.) mm 12.600 12.900 11.000 13.500
C—Width 2.500 2.540 2.500 2.540
Weight, ton 48.5 51.5 37.5 64
Number of axels 4 4 3 5
Features and options
Features and options
S555 SLK S556 SLK S500 R S715 SLK
Automatic baling cycle with bale eject
Automatic logging cycle with log eject
Automatic shearing cycle
Automatic lubrication of shear and hold down
Automatic lubrication of box hinges
Bronze hold down liner plates
Bronze shear liner plates
Cabin with controls and seat
Cabin air conditioning (4)
Cabin heater (4)
Cold package(2)
Color Sierra green RAL 6025
Color personalized
Diesel drive
Diesel engine soundproofing
Hardox box liners
Heat package(3)
Hold down clamp
Oil cooling
Oil heating
Ram retraction for transportation
Remote control
Short stroke on shear
Trailer
TUV certification
An impressive feature package! What competitors list as options is often standard on a Sierra. This reduces your purchase cost of a new machine.
= standard feature = optional feature = not possible (2) includes higher oil heating capacity —(3)includes higher oil cooling capacity, increased dust filters—(4) only in combination with cabin
Sierra reserves the right to make any type of alteration or modification with prior notice. Sierra Europe srlu is a wholly owned subsidiary of Sierra Europe Recycling Limited. © Sierra Europe 2007
SIERRA EUROPE Srlu 11/b Via Caselli 44100 Ferrara, Italy Phone +39.053.290.0733 Fax +39.053.297.5350
info
@si
erra
euro
pe.c
om -
sie
rrae
urop
e.co
m