Post on 24-Aug-2020
transcript
Sequel ‘O’ Stone
P E R F E C T I O N Y O U D E S I R E
Sequel ‘O’ Stone Sequel ‘O’ Stone system used a polymer modified dry powder mix to
give realistic 3D appearance of natural stone textures on streets,
squares, sidewalks, boulevards, parking, cemeteries, internal yards,
ramps, barns, terrazzo, swimming pools sides, bathrooms, malls and
restructuring of historic centers, either outside or inside. We can
replicate any design, texture and color and create a design to suit your
specific requirements. Our product can complete the desired work in a
fraction of the time than needed for conventional stone applications
and continues to look beautiful after years of exposure to nature's
elements.
Sequel ‘O’ Stone Advantages
Remarkable Realism
Incredible Bonding Ability
Durable, Light Weight
Interior & Exterior
Great Value
Realistic Colors & Designs
High Bonding Strength
Strong & Durable
Water, Fire & Fade Resistant
Less Prep Work
Easy to Clean Surface
Uniform and Intensely Colored Surface
Sequel ‘O’ Stone
Sequel ‘O’ Stone
Sequel ‘O’ Stone
Sequel ‘O’ Stone
Sequel ‘O’ Stone
Sequel ‘O’ Stone
Sequel ‘O’ Stone
Sequel ‘O’ Stone
Sequel ‘O’ Stone
Technical Test Report of Stone Effect
Tests of fresh & solid mortar were performed within the range for the initial
test of a product type according to the requirements of SIST EN 13813:2003
standard. The testing procedures compiled with the standards of the series SIST
EN 1015 & series SIST EN 13892 as well as with SIST EN 1062 – 3 standards, at
factories in- house laboratory testing facilities.
Stone Effect Powder Mix
Measured Property 1 2 Mean Value
Testing Procedure
Consistency – flow table test (mm) 224 221 223 SIST EN 1015-3
Dry bulk density (kg/m3) 1900 1900 1900 SIST EN 1015-6
These tests are carried out by National Test House-Ministry of Consumer Affairs, Govt. of
India as per IS: 1237-1980 specification.
Sequel ‘O’ Stone Water Absorption (In %)
Average water Absorption 2.74
Water Transverse Strength (In N/ mm2)
Average Strength 6.4
Resistance to wear (In mm)
(A) Average wear 3.20
(B) Maximum wear on individual specimen 3.56
Product Stone Effect Powder Mix sample comprised of full tiles and cut piece.
Note: Actual test results achieved as per test conducted at NATIONAL TEST HOUSE
(Ministry Consumer Affairs, Food & Public Distribution Department of
Consumer Affairs, GOVT. of INDIA) V/S Standard Test method & Specification as
per IS: 1237-1980. Tests Result achieved STANDARD
As per IS:1237-1980 1. Dimension (mm)
(a) Length (Avg.) 287 (b) Breadth (Avg.) 287.1 © Thickness (Avg.) 26.42
(a) & (b) Tolerance on length of
breadth shall be 1mm © Tolerance
on thickness shall be ± 5
Sequel ‘O’ Stone
Test Report
2. Water absorption (%)
Average water absorption 2.74 Should not exceed 10%
3. Wet transverse strength N/mm2
Average strength 6. 4 Shall not be less than 3 N/mm2
4. Resistance to wear (mm)
(a) For general purpose tiles (a) Average wear
3.2
(1) Average wear 3.5 mm
(2) Wear in individual specimen is 4mm
(b) For heavy duty floor tiles (b) Maximum wear in
Individual specimens
3.56
(1) Averages wear 2 mm.
(2) Wear in individual specimen is 2.5 mm
Sequel ‘O’ Stone
Contact Us
G1-121-122, Udhyog Vihar,
Bedla Road, Sukher Ind.Area
UDAIPUR – 313001
RAJASTHAN, INDIA
TELEFAX: +91 294 2440829
MOBILE: +91 90012 66999
E-MAIL: info@ashokamarbles.in
ashokagroup28@gmail.com
WEB: www.ashokamarbles.in
SKYPE: ashoka.marbles