Post on 07-Oct-2020
transcript
www.rosss.it
SEQUOIA®
CAN T I L E V E R
HEAV
Y STO
RAGE
2
RESEARCH
RESPONSIBILITY
1
2
PIONEERS OF EARTHQUAKE – PROOF
CERTIFICATIONS: PRODUCT, ENVIRONMENTAL AND SOCIAL RESPONSIBILITY
RADIOACTIVITY MONITORING
THE ONLY ONE COMPANY OF ITS SECTORLISTED ON THE STOCK EXCHANGE
INTERIOR LABORATORY TESTROSSS installed its first anti-seismic plant in 1996. In 2006 it performed important experiments and tests on the shaking table of Athens University and in the same year it got a patent for the first Italian anti-seismic foot. Today ROSSS continues to carry out research and specialized studies in the anti-seismic field, supported by important Italian and foreign Universities. ROSSS is the only Italian company in this field to have its own efficient and modern Laboratory Test.
ROSSS is the first Italian company of the sector which has achieved the ISO 9001 Quality Certification. ROSSS is also certified in terms of Social Responsibility (SA 8000) and Environmental (ISO 14000 and EMAS). ROSSS products are certified according to European standards. All steel used by ROSSS is free from radioactive contamination, as agreed with D.Lgs 17/03/95 N°230
R OFROSSS®
QUALITYTHE 4
3
RELATIONSHIP
RIGOROUSLYMADE IN ITALY
3
4
MORE THAN 50% OF EXPORT TURNOVER
ALL MADE IN ROSSS
MORE THAN 50 COUNTRIES SERVED IN THE WORLD
ALL MADE IN ITALY
OPENNESS TOWARDS CUSTOMERSROSSS gains more than 50% of its turnover exporting its production in more than 50 Countries in the world. ROSSS is always available to welcome its guests for visits to its systems.
ROSSS designs and produces all range of products in its facilities located in Italy.
www.rosss.it
4
The 5 ROSSS Cantilever
SAFETY BOLTThe safety bolt of traditional cantilever systems does not have any elements that prevent it from slipping in case of stress.
The safety bolt SEQUOIA® ROSSS® is realized with a production system covered by exclusive ROSSS® patent, by molding rather than extrusion.
The safety bolt is the element on which the considerable forces, determined by the loads placed on the system’s shelves, are discharged.
This element is therefore entrusted with a crucial task in terms of safety. The safety bolt is of a certified structural steel S355 JR, by warm forming.
1
The most versatile and intelligent way to store heavy loads. From the engineering progress of SEQUOIA®
ROSSS® CANTILEVER, the latest generation modular rack designed for heavy loads of any nature and volume.
Two exclusive patents, maximum adaptability and flexibility to optimize warehouse management in many sectors; it rationalizes the arrangement of pieces with inhomogeneous measures, welcoming both material stowed in pallets or containers and materials with variable lengths that are not palletized.
Built to guarantee the most advanced standards of resistance over time, it can safely face stresses and shocks in warehouse movements. It can be designed to guarantee structural stability even in case of seismic actions.
®
5
BRACING ELEMENTThe columns and all the other elements of the system are held together by special bracing elements, which therefore play a very important function on the stability of the entire structure.
The SEQUOIA® ROSSS® bracing elements are made with a diameter of 42 mm, against smaller tubes or other types of open profiles.
BOLTThe unique bolting allows absolute precision in the connection between base and column, eliminating the tolerance of the hole/bolt tolerances.
COLUMNIt is the only cantilever with columns that are fully bolted instead of welded and therefore they are also painted inside for a better protection and durability. With the added advantage of a clear reduction of the size of the profiles during transport.
BASE COLUMN JUNCTIONBase and column are held together by fixing bolts present at the level of the columns. The solid tightness of their fastening is fundamental for the safety of the whole system.
The base of the cantilever is the element on which the vertical forces of the entire system are discharged. It is the-refore an essential element for security purposes.
2
4
3
5
Rack Innovations
7
SEQUOIA
®
www.rosss.it
Firenze
EUROINOXFITTINGS & SERVICE S.R.L.
9
SEQUOIA
®
www.rosss.it
Perugia
UMBRA CUSCINETTI
11
SEQUOIA
®
www.rosss.it
MENCI & C. S.P. A.Castiglion Fiorentino Arezzo
13
SEQUOIA
®
www.rosss.it
Firenze
GEAL S.P. A.
15
SEQUOIA
®
www.rosss.it
Treviso
BRETON S.P. A.
17
SEQUOIA
®
www.rosss.it
UmbertidePerugia
METALMECCANICATIBERINA
19
SEQUOIA
®
www.rosss.it
Reggiolo
Reggio Emilia
PROFILTUBI
20
1
3 4
2
Different requirements, one solution.SEQUOIA
® ACCESSORIES
21
1. Mesh panel
2. Tapered or parallel arm
3. Secondary beam
4. Blocking pin
5. Arm protection
6. Contrast rails
7. Roof
8. Open plank
5 6
7 8
www.rosss.it
USE OF THE PRODUCT ACCORDING TO THE PRODUCT MARKET
www.rosss.it
STEEL SHEET TUBES
STEEL SHEETS
LOADS OF DIFFERENT LENGTHS
ALUMINIUM PROFILES
CAR
DISMANTLING
LONG LOADS
WOOD
SEQUOIA®
C A N T I L E V E R
Technical data and all informationSEQUOIA®
ACTUAL ARM LENGTH
SEQUOIA COMPONENTS
L = I+S
L = Nominal arm lengthI = Arm lengthS = Bracket thickness
L
I
S
Column
Cross bracings
Safety bolt
Diagonal
Horizontal
Footplate
Front closure
Left base
Fixing bolts for base
Right base
Arm
N.B. The COLUMN is composed by the upright, the right and left bases, the footplate and the front closure.
COLUMNThe steel used for making the column is of a certified structural type S235 JR, with a minimum unit yield strength of 235 N/mm2. The product is obtained by black sheets through pressing and cold roll forming process.
BASEThe steel used for making the base is of a certified structural type S235 JR, with a minimum unit yield strength of 235 N/mm2. The product is obtained by black sheets through pressing and cold roll forming process.
ARMThe steel used for making the arm is of a certified structural type S235 JR, with a minimum unit yield strength of 235 N/mm2. The product is obtained by black sheets through pressing and cold roll forming process.
FOOTPLATEThe steel used for making the footplate is of a certified structural type S235 JR, with a minimum unit yield strength of 235 N/mm2. The product is obtained by black sheets through pressing and cold roll forming process.
FRONT CLOSUREThe steel used for making the front closure is of a certified structural type S235 JR, with a minimum unit yield strength of 235 N/mm2. The product is obtained by black sheets through pressing and cold roll forming process.
SAFETY BOLTThe steel used for making the safety bolt is of a certified structural type S355 JR, with a minimum unit yield strength of 355 N/mm2. The product is obtained through hot formed steel.
HORIZONTAL AND DIAGONALThe steel used for making the horizontal and diagonal is of a certified structural type S235 JRH, with a minimum unit yield strength of 235 N/mm2. The product is obtained through the flattening of the extremities.
ARMS INTERCHANGEABILITY
The SEQUOIA® ROSSS® cantilever stands out in the market for the effective modularity and versatility allowed by having chosen a single 150 mm front section for all sections of the uprights produced.
This allows ROSSS® users to take advantage of a real interchangeability within the same warehou-se between shelves and columns, since these are not bound to the different sections of the structural elements.
COLUMNS PROFILES SECTIONS
Technical data and all informationSEQUOIA®
150
150
COLUMN 400
COLUMN 450
COLUMN 450 WITH REINFORCE
150
COLUMN 250
COLUMN 300
COLUMN 350
150
150
400
450
150
150
250
300
450350
TABLE
Height (mm) Base depth (mm)
500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000
3000Min capacity 4.250 3.900 3.550 3.200 2.950 2.700 2.550 2.350 2.800 2.650 2.450 2.350 2.250 2.150 2.050 1.950
Max capacity 4.250 22.200 20.750 19.300 18.200 17.100 16.000 14.950 14.100 13.250 12.400 11.750 11.100 10.500 10.000 9.550
3300Min capacity 4.250 3.900 3.550 3.200 2.950 2.700 2.550 2.350 2.800 2.650 2.450 2.350 2.250 2.150 2.050 1.950
Max capacity 4.250 22.200 20.750 19.300 18.200 17.100 16.000 14.950 14.100 13.250 12.400 11.750 11.100 10.500 10.000 9.550
3600Min capacity 4.250 3.900 3.550 3.200 2.950 2.700 2.550 2.350 2.800 2.650 2.450 2.350 2.250 2.150 2.050 1.950
Max capacity 4.250 22.200 20.750 19.300 18.200 17.100 16.000 14.950 14.100 13.250 12.400 11.750 11.100 10.500 10.000 9.550
3900Min capacity 4.250 3.900 3.550 3.200 2.950 2.700 2.550 2.350 2.800 2.650 2.450 2.350 2.250 2.150 2.050 1.900
Max capacity 4.250 22.200 20.750 19.300 18.200 17.100 16.000 14.950 14.100 13.250 12.400 11.750 11.100 10.500 10.000 9.550
4200Min capacity 4.200 3.850 3.500 3.200 2.950 2.700 2.500 2.300 2.800 2.650 2.450 2.350 2.200 2.050 1.950 1.800
Max capacity 4.200 22.150 20.700 19.250 18.150 17.000 16.000 15.000 14.100 13.250 12.350 11.750 11.150 10.500 10.000 9.550
4500Min capacity 4.100 3.750 3.450 3.150 2.800 2.500 2.300 2.100 2.750 2.600 2.450 2.300 2.150 1.950 1.850 1.700
Max capacity 4.100 22.150 20.700 19.250 18.150 17.000 16.000 15.000 14.100 13.250 12.350 11.750 11.150 10.500 10.000 9.550
4800Min capacity 3.950 3.600 3.250 2.900 2.600 2.350 2.150 1.950 2.650 2.450 2.200 2.100 1.950 1.800 1.700 1.600
Max capacity 3.950 22.150 20.700 19.250 18.150 17.000 16.000 15.000 14.100 13.250 12.350 11.750 11.150 10.500 10.000 9.550
5100Min capacity 3.850 3.450 3.100 2.700 2.450 2.150 2.000 1.850 2.450 2.300 2.100 1.950 1.850 1.700 1.600 1.500
Max capacity 3.850 22.150 20.700 19.250 18.150 17.000 16.000 15.000 14.100 13.250 12.350 11.750 11.150 10.500 10.000 9.550
5400Min capacity 3.800 3.450 3.050 2.700 2.450 2.200 2.000 1.800 2.500 2.300 2.100 1.950 1.800 1.700 1.600 1.500
Max capacity 3.800 22.050 20.650 19.250 18.050 16.900 15.850 14.800 14.000 13.150 12.300 11.650 11.000 10.350 9.900 9.400
5700Min capacity 3.600 3.250 2.850 2.450 2.250 2.000 1.800 1.650 2.250 2.100 1.950 1.800 1.700 1.550 1.450 1.400
Max capacity 3.600 22.050 20.650 19.250 18.050 16.900 15.850 14.800 14.000 13.150 12.300 11.650 11.000 10.350 9.900 9.400
6000Min capacity 3.300 2.950 2.600 2.250 2.050 1.850 1.650 1.500 2.050 1.900 1.750 1.650 1.550 1.400 1.350 1.300
Max capacity 3.300 22.050 20.650 19.250 18.050 16.900 15.850 14.800 14.000 13.150 12.300 11.650 11.000 10.350 9.900 9.400
6300Min capacity 3.300 2.950 2.600 2.250 2.050 1.850 1.650 1.500 2.050 1.900 1.750 1.650 1.550 1.400 1.350 1.300
Max capacity 3.300 22.050 20.650 19.250 18.050 16.900 15.850 14.800 14.000 13.150 12.300 11.650 11.000 10.350 9.900 9.400
6600Min capacity 2.650 2.350 2.100 1.800 1.650 1.450 1.350 1.200 1.850 1.700 1.550 1.450 1.350 1.250 1.200 1.150
Max capacity 2.650 22.150 20.650 19.150 17.700 16.250 15.100 14.000 13.100 12.250 11.400 10.750 10.100 9.450 8.750 8.050
6900Min capacity 2.550 2.250 2.000 1.750 1.550 1.400 1.300 1.200 1.750 1.650 1.500 1.400 1.300 1.200 1.150 1.100
Max capacity 2.550 21.700 20.050 18.350 16.950 15.550 14.450 13.350 12.550 11.700 10.900 10.300 9.650 9.050 8.450 7.900
7200Min capacity 2.400 2.150 1.900 1.650 1.500 1.350 1.250 1.150 1.700 1.600 1.450 1.350 1.250 1.150 1.100 1.050
Max capacity 2.400 21.250 19.400 17.500 16.150 14.800 13.750 12.700 11.950 11.200 10.450 9.850 9.250 8.650 8.200 7.750
COLUMN CAPACITY
www.rosss.it
Length(mm)
Min capacity(Kg)
Max capacity(Kg)
500 550 6.550
600 450 5.600
700 400 5.000
800 350 4.400
900 300 3.950
1000 250 3.600
1200 200 3.050
1500 150 2.450
1800 100 1.850
2000 50 1.450
ARM CAPACITY
The indicated capacities are valid with a uniformly distributed load.
com
unicazione&im
magin
e
PALLET RACKS
IRON FIST
UNIMONDIAL
TRAIN
IRON FIST
DUBLEZ
UNIMONDIAL GALV
MECANO
MAMMUTH
TREE CHEESE
UNIZINC EASY
HIGH BAY WAREHOUSE
BOLTLESS MODULAR SHELF
COMPACT MOBILE FILING SYSTEM
SUPER PALLET RACKS
SHELVING SYSTEM
BOLTLESS SHELVING
SPECIAL SYSTEMS
DRIVE-IN
BOLTLESS SHELVING
BOLTLESS MODULAR SHELF
MEZZANINE
RESEARCH, PRODUCTION, DISTRIBUTION OF METAL STRUCTURES FOR THE MANAGEMENT OF INDUSTRIAL AND COMMERCIAL AREAS: MOBILE BASES FOR ARCHIVES AND WAREHOUSES, IRON FIST PALLETS RACK AND DRIVE-IN, UNIMONDIAL, UNIZINC EASY, SEQUOIA CANTILEVER, MAMMUTH, DUBLEZ, MECANO, HIGH BAY WAREHOUSE, TREE CHEESE.
RACK & STORAGE SOLUTIONSQUALITY THAT CREATES VALUE
SEQUOIA
CANTILEVER
ROSSS S.p.A. Viale Kennedy, 97 - 50038 Scarperia e San Piero Firenze (Italia) Phone +39 055 84001 Fax +39 055 8400300