9© 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 88 SuperFly® CatalogDimensions in Inches (millimeters) are subject to change without notice.

A

SERIES 88

SuperFly® ConnectorsVertical PCB Footprints Viewed from rear PC tail side of unshrouded (Type A) insert. Use mirror image for shrouded (Type B) insert.

Insert Arrangement PCB Footprint Contact Location

B7N

45°Ø.332 (8.43)Ø.281 (7.14)

4x 90°

4x Standoff4x .080 (2.03)

0

0

Y

X

5431 2

6 7

Ø.392 (9.96) Tag X Loc Y Loc Size1 -.0250 .0433 Nano2 .0250 .0433 Nano3 -.0500 .0000 Nano4 .0000 .0000 Nano5 .0500 .0000 Nano6 -.0250 -.0433 Nano7 .0250 -.0433 Nano

C10N

45°

4x 90°

Ø.301 (7.64)Ø.352 (8.94)

4x .080 (2.03)

4x Standoff

0

0

Y

X

76

5431

109

8

2

Ø.412 (10.46) Tag X Loc Y Loc Size1 -.0250 .0683 Nano2 .0250 .0683 Nano3 -.0500 .0250 Nano4 .0000 .0250 Nano5 .0500 .0250 Nano

Tag X Loc Y Loc Size6 -.0500 -.0250 Nano7 .0000 -.0250 Nano8 .0500 -.0250 Nano9 -.0250 -.0683 Nano10 .0250 -.0683 Nano

C2M2N

Ø.352 (8.94)Ø.301 (7.65)

4X STANDOFF

4X .080 (2.03)

45°

4X 90°

0

0

Y

X

Ø.412 (10.46)

1 2

3 4

Tag X Loc Y Loc Size1 -.0250 .0550 Nano2 .0250 .0550 Nano

Tag X Loc Y Loc Size3 -.0325 -.0280 Micro4 .0325 -.0280 Micro

D3M

45°

4x 90°

Ø.371 (9.42)Ø.320 (8.13)

4x Standoff

4x .080 (2.03) Ø.431 (10.95)

1

2 3

X

Y

0

0

Tag X Loc Y Loc Size1 .0000 .0373 Micro2 -.0325 -.0190 Micro3 .0325 -.0190 Micro

D2W2N

Ø.371 (9.42)Ø.320 (8.13)

45°

4X 90°

4X STANDOFF

4X .080

2

43

1

Ø.431 (10.95)

X

Y

0

0

Tag X Loc Y Loc Size1 -.0375 .0222 #232 .0375 .0222 #23

Tag X Loc Y Loc Size3 -.0250 -.0544 Nano4 .0250 -.0544 Nano

PC Tail Wire Diameter By Contact Size #23 contact uses #24 wire Ø.020 Micro contact uses #26 wire Ø.016 Nano contact uses #30 wire Ø.010

10 © 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 88 SuperFly® Catalog Dimensions in Inches (millimeters) are subject to change without notice.

A

SERIES 88

SuperFly® ConnectorsVertical PCB Footprints Viewed from rear PC tail side of unshrouded (Type A) insert. Use mirror image for shrouded (Type B) insert.

Insert Arrangement PCB Footprint Contact Location

E3W

45°

4x 90°

Ø.391 (9.93)Ø.340 (8.64)

4x Standoff

4x .080 (2.03) Ø.451 (11.46)

1

2 3

X

Y

0

0

Tag X Loc Y Loc Size1 .0000 .0420 #232 -.0375 -.0230 #233 .0375 -.0230 #23

E4M

45°

4X 90°

Ø.391 (9.93)Ø.340 (8.64)

4X STANDOFF

4X .080 (2.03)

43

21

Ø.451 (11.46)

X

Y

0

0

Tag X Loc Y Loc Size1 -.0325 .0325 Micro2 .0325 .0325 Micro3 -.0325 -.0325 Micro4 .0325 -.0325 Micro

E19N

4X 90°

45°

Ø.340 (8.64)Ø.391 (9.93)

4X .080 (2.03)

4X STANDOFF

Ø.451 (11.46)

X

Y

0

0

1619

1518

141317

111098

1 234 5 6 7

12

Tag X Loc Y Loc Size1 -.0500 .0866 Nano2 .0000 .0866 Nano3 .0500 .0866 Nano4 -.0750 .0433 Nano5 -.0250 .0433 Nano6 .0250 .0433 Nano7 .0750 .0433 Nano8 -.1000 .0000 Nano9 -.0500 .0000 Nano10 .0000 .0000 Nano

Tag X Loc Y Loc Size11 .0500 .0000 Nano12 .1000 .0000 Nano13 -.0750 -.0433 Nano14 -.0250 -.0433 Nano15 .0250 -.0433 Nano16 .0750 -.0433 Nano17 -.0500 -.0866 Nano18 .0000 -.0866 Nano19 .0500 -.0866 Nano

E4M4N

4x 90°

45°Ø.391 (9.93)Ø.340 (8.64)

4x Standoff

4x .080 (2.03)

1

2 3

45

6

7 8

0

0

Y

X

Ø.451 (11.46) Tag X Loc Y Loc Size1 -.0650 .0000 Micro2 -.0325 .0719 Micro3 .0325 .0719 Micro4 .0650 .0000 Micro

Tag X Loc Y Loc Size5 .0000 .0156 Nano6 .0000 -.0344 Nano7 -.0250 -.077 Nano8 .0250 -.077 Nano

PC Tail Wire Diameter By Contact Size #23 contact uses #24 wire Ø.020 Micro contact uses #26 wire Ø.016 Nano contact uses #30 wire Ø.010

11© 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 88 SuperFly® CatalogDimensions in Inches (millimeters) are subject to change without notice.

A

Insert Arrangement PCB Footprint Contact Location

E3W

45°

4x 90°

Ø.391 (9.93)Ø.340 (8.64)

4x Standoff

4x .080 (2.03) Ø.451 (11.46)

1

2 3

X

Y

0

0

Tag X Loc Y Loc Size1 .0000 .0420 #232 -.0375 -.0230 #233 .0375 -.0230 #23

E4M

45°

4X 90°

Ø.391 (9.93)Ø.340 (8.64)

4X STANDOFF

4X .080 (2.03)

43

21

Ø.451 (11.46)

X

Y

0

0

Tag X Loc Y Loc Size1 -.0325 .0325 Micro2 .0325 .0325 Micro3 -.0325 -.0325 Micro4 .0325 -.0325 Micro

E19N

4X 90°

45°

Ø.340 (8.64)Ø.391 (9.93)

4X .080 (2.03)

4X STANDOFF

Ø.451 (11.46)

X

Y

0

0

1619

1518

141317

111098

1 234 5 6 7

12

Tag X Loc Y Loc Size1 -.0500 .0866 Nano2 .0000 .0866 Nano3 .0500 .0866 Nano4 -.0750 .0433 Nano5 -.0250 .0433 Nano6 .0250 .0433 Nano7 .0750 .0433 Nano8 -.1000 .0000 Nano9 -.0500 .0000 Nano10 .0000 .0000 Nano

Tag X Loc Y Loc Size11 .0500 .0000 Nano12 .1000 .0000 Nano13 -.0750 -.0433 Nano14 -.0250 -.0433 Nano15 .0250 -.0433 Nano16 .0750 -.0433 Nano17 -.0500 -.0866 Nano18 .0000 -.0866 Nano19 .0500 -.0866 Nano

E4M4N

4x 90°

45°Ø.391 (9.93)Ø.340 (8.64)

4x Standoff

4x .080 (2.03)

1

2 3

45

6

7 8

0

0

Y

X

Ø.451 (11.46) Tag X Loc Y Loc Size1 -.0650 .0000 Micro2 -.0325 .0719 Micro3 .0325 .0719 Micro4 .0650 .0000 Micro

Tag X Loc Y Loc Size5 .0000 .0156 Nano6 .0000 -.0344 Nano7 -.0250 -.077 Nano8 .0250 -.077 Nano

Insert Arrangement PCB Footprint Contact Location

F4W

45°

4X 90°

Ø.411 (10.44)Ø.360 (9.14)

4X STANDOFF

4X .080 (2.03)

12

3 40

0

Y

X

Ø.471 (11.96) Tag X Loc Y Loc Size1 -.0375 .0375 #232 .0375 .0375 #233 -.0375 -.0375 #234 .0375 -.0375 #23

F7M

4x 90°

45°

Ø.411 (10.44)Ø.360 (9.14)

4x Standoff

4x .080 (2.03)Ø.471 (11.96)

1 2

3 4 5

6 7

X

Y

0

0

Tag X Loc Y Loc Size1 -.0325 .0563 Micro2 .0325 .0563 Micro3 -.0650 .0000 Micro4 .0000 .0000 Micro5 .0650 .0000 Micro6 -.0325 -.0563 Micro7 .0325 -.0563 Micro

F22N

4X 90°

45°

Ø.411 (10.44)Ø.360 (9.14)

4X STANDOFF

4X .080 (2.03)

1 35 8 9

1110 12 1314 15 16 18

19 20 21 22

0

0

Y

X

Ø.471 (11.96)

6 7

17

2 4

Tag X Loc Y Loc Size1 -.0750 .0866 Nano2 -.0250 .0866 Nano3 .0250 .0866 Nano4 .0750 .0866 Nano5 -.1000 .0433 Nano6 -.0500 .0433 Nano7 .0000 .0433 Nano8 .0500 .0433 Nano9 .1000 .0433 Nano10 -.0750 .0000 Nano11 -.0250 .0000 Nano

Tag X Loc Y Loc Size12 .0250 .0000 Nano13 .0750 .0000 Nano14 -.1000 -.0433 Nano15 -.0500 -.0433 Nano16 .0000 -.0433 Nano17 .0500 -.0433 Nano18 .1000 -.0433 Nano19 -.0750 -.0866 Nano20 -.0250 -.0866 Nano21 .0250 -.0866 Nano22 .0750 -.0866 Nano

F4M8N

45°

4x 90°

Ø.411 (10.44)Ø.360 (9.14)

4x .080 (2.03)

4x Standoff

12111098

76

51

2 3

4

Ø.471 (11.96)

X

Y

0

0

Tag X Loc Y Loc Size1 -.0813 .0162 Micro2 -.0325 .0833 Micro3 .0325 .0833 Micro4 .0813 .0162 Micro

Tag X Loc Y Loc Size5 .0000 .0270 Nano6 -.0250 -.0163 Nano7 .0250 -.0163 Nano8 -.0500 -.0596 Nano9 .0000 -.0596 Nano10 .0500 .0596 Nano11 -.0250 -.1029 Nano12 .0250 -.1029 Nano

PC Tail Wire Diameter By Contact Size #23 contact uses #24 wire Ø.020 Micro contact uses #26 wire Ø.016 Nano contact uses #30 wire Ø.010

SERIES 88

SuperFly® ConnectorsVertical PCB Footprints Viewed from rear PC tail side of unshrouded (Type A) insert. Use mirror image for shrouded (Type B) insert.

12 © 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 88 SuperFly® Catalog Dimensions in Inches (millimeters) are subject to change without notice.

A

Insert Arrangement PCB Footprint Contact Location

F4W4N0

0

Y

X

Ø.471 (11.96)

87

6

5

4

32

1

4x .080 (2.03)

4x Standoff

Ø.360 (9.14)Ø.411

45°

4x 90°

Tag X Loc Y Loc Size1 -.0740 -.0125 #232 -.0375 .0750 #233 .0375 .0750 #234 .0740 -.0125 #23

Tag X Loc Y Loc Size5 .0000 .0000 Nano6 .0000 -.0500 Nano7 -.0250 -.0933 Nano8 .0250 -.0933 Nano

G7W 4x 90°

45°Ø.430 (10.92)

Ø.379 (9.63)

4x Standoff

4x .080 (2.03)Ø.490 (12.45)

4

76

5

21

3

X

Y

0

0

Tag X Loc Y Loc Size1 -.0375 .0650 #232 .0375 .0650 #233 -.0750 .0000 #234 .0000 .0000 #235 .0750 .0000 #236 -.0375 -.0650 #237 .0375 -.0650 #23

G10M 4x 90°

45°Ø.430 (10.92)

Ø.379 (9.63)

4x Standoff

4x .080 (2.03)

9

3

1 2

5

6 7

4

8

10

Ø.490 (12.45)

X

Y

0

0

Tag X Loc Y Loc Size1 -.0375 .1025 Micro2 .0375 .1025 Micro3 -.0750 .0375 Micro4 .0000 .0375 Micro5 .0750 .0375 Micro6 -.0750 -.0375 Micro7 .0000 -.0375 Micro8 .0750 -.0375 Micro9 -.0375 -.1025 Micro10 .0375 -.1025 Micro

G31N 4x 90°

45°Ø.430 (10.92)

Ø.379 (9.63)

4x Standoff

4x .080 (2.03)

3 413

14 1520 21 22 23 24

25 26 27 28 29

30 31

1 25 6 7

8 9 10 11 1216 1718

19

Ø.490 (12.45)

X

Y

0

0

Tag X Loc Y Loc Size1 -.0250 .1299 Nano2 .0250 .1299 Nano3 -.1000 .0866 Nano4 -.0500 .0866 Nano5 .0000 .0866 Nano6 .0500 .0866 Nano7 .1000 .0866 Nano8 -.1250 .0433 Nano9 -.0750 .0433 Nano10 -.0250 .0433 Nano11 .0250 .0433 Nano12 .0750 .0433 Nano13 .1250 .0433 Nano14 -.1000 .0000 Nano15 -.0500 .0000 Nano16 .0000 .0000 Nano

Tag X Loc Y Loc Size17 .0500 .0000 Nano18 .1000 .0000 Nano19 -.1250 -.0433 Nano20 -.0750 -.0433 Nano21 -.0250 -.0433 Nano22 .0250 -.0433 Nano23 .0750 -.0433 Nano24 .1250 -.0433 Nano25 -.1000 -.0866 Nano26 -.0500 -.0866 Nano27 .0000 -.0866 Nano28 .0500 -.0866 Nano29 .1000 -.0866 Nano30 -.0250 -.1299 Nano31 .0250 -.1299 Nano

PC Tail Wire Diameter By Contact Size #23 contact uses #24 wire Ø.020 Micro contact uses #26 wire Ø.016 Nano contact uses #30 wire Ø.010

SERIES 88

SuperFly® ConnectorsVertical PCB Footprints Viewed from rear PC tail side of unshrouded (Type A) insert. Use mirror image for shrouded (Type B) insert.

13© 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 88 SuperFly® CatalogDimensions in Inches (millimeters) are subject to change without notice.

A

Insert Arrangement PCB Footprint Contact Location

G6M10N

Ø.430 (10.92)Ø.379 (9.63)

4x 90°

45°

4x .080 (2.03)

4x Standoff

1

23 4

5

6

7 8

9 10

11 12

13 14 15 16

Ø.490 (12.45)

X

Y

0

0

Tag X Loc Y Loc Size1 -.0900 -.0214 Micro2 -.0872 .0583 Micro3 -.0325 .1037 Micro4 .0325 .1037 Micro5 .0872 .0583 Micro6 .0900 -.0214 Micro

Tag X Loc Y Loc Size7 -.0250 .0350 Nano8 -.0250 -.0350 Nano9 -.0250 -.0150 Nano10 .0250 -.0150 Nano11 -.0250 -.0650 Nano12 .0250 -.0650 Nano13 -.0750 -.1150 Nano14 -.0250 -.1150 Nano15 .0250 -.1150 Nano16 .0750 -.1150 Nano

G6M12N 4x 90°

45°Ø.430 (10.92)Ø.379 (9.63)

4x Standoff

4x .080 (2.03)

1

2

3 4

5

6

7

8

9

11

10

12

13

14

15

16

17

18

Ø.490 (12.45)

X

Y

0

0

Tag X Loc Y Loc Size1 -.1035 -.0227 Micro2 -.1006 .0598 Micro3 -.0413 .1171 Micro4 .0413 .1171 Micro5 .1006 .0598 Micro6 .1035 -.0227 Micro

Tag X Loc Y Loc Size7 -.0500 -.0716 Nano8 -.0500 .0150 Nano9 -.0250 .1149 Nano10 -.0250 -.0283 Nano11 -.0250 .0583 Nano12 .0000 -.0716 Nano13 .0000 .0150 Nano14 .0250 -.1149 Nano15 .0250 -.0283 Nano16 .0250 .0583 Nano17 .0500 -.0716 Nano18 .0500 .0150 Nano

H10W

45°

4x 90°

Ø.470 (11.94)Ø.419 (10.64)

4x Standoff

4x .080 (2.03)

1 2

3 4 5

6 89 10

X

Y

0

0

Ø.530 (13.46)

7

Tag X Loc Y Loc Size1 -.0375 .1025 #232 .0375 .1025 #233 -.0750 .0375 #234 .0000 .0375 #235 .0750 .0375 #23

Tag X Loc Y Loc Size6 -.0750 -.0375 #237 .0000 -.0375 #238 .0750 -.0375 #239 -.0375 -.1025 #2310 .0375 -.1025 #23

PC Tail Wire Diameter By Contact Size #23 contact uses #24 wire Ø.020 Micro contact uses #26 wire Ø.016 Nano contact uses #30 wire Ø.010

SERIES 88

SuperFly® ConnectorsVertical PCB Footprints Viewed from rear PC tail side of unshrouded (Type A) insert. Use mirror image for shrouded (Type B) insert.

14 © 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 88 SuperFly® Catalog Dimensions in Inches (millimeters) are subject to change without notice.

A

Insert Arrangement PCB Footprint Contact Location

H37N

45°

4x 90°

Ø.470 (11.94)Ø.419 (10.64)

4x Standoff

4x .080 (2.03)

3 4

13 14 1520 21 22

23 24 2526 27 2829 30 31 32 33

34 35 36 37

1 25 6 7 89

10 11 121617 18 19

X

Y

0

0

Ø.530 (13.46)

Tag X Loc Y Loc Size1 -.0750 .1299 Nano2 -.0250 .1299 Nano3 .0250 .1299 Nano4 .0750 .1299 Nano5 -.1000 .0866 Nano6 -.0500 .0866 Nano7 .0000 .0866 Nano8 .0500 .0866 Nano9 .1000 .0866 Nano10 -.1250 .0433 Nano11. -.0750 .0433 Nano12 -.0250 .0433 Nano13 .0250 .0433 Nano14 .0750 .0433 Nano15 .1250 .0433 Nano16 -.1500 .0000 Nano17 -.1000 .0000 Nano18 -.0500 .0000 Nano19 .0000 .0000 Nano

Tag X Loc Y Loc Size20 .0500 .0000 Nano21 .1000 .0000 Nano22 .1500 .0000 Nano23 -.1250 -.0433 Nano24 -.0750 -.0433 Nano25 -.0250 -.0433 Nano26 .0250 -.0433 Nano27 .0750 -.0433 Nano28 .1250 -.0433 Nano29 -.1000 -.0866 Nano30 -.0500 -.0866 Nano31 .0000 -.0866 Nano32 .0500 -.0866 Nano33 .1000 -.0866 Nano34 -.0750 -.1299 Nano35 -.0250 -.1299 Nano36 .0250 -.1299 Nano37 .0750 -.1299 Nano

H6W14N

45°

4x 90°

Ø.470 (11.94)Ø.419 (10.64)

4x Standoff

4x .080 (2.03)

191817

1612

1110987

6

52

1

20

151413

43

Ø.530 (13.46)

0

0

Y

X

Tag X Loc Y Loc Size1 -.1200 -.0500 #232 -.1200 .0500 #233 -.0500 .1200 #234 .0500 .1200 #235 .1200 .0500 #236 .1200 -.0500 #23

Tag X Loc Y Loc Size7 -.0250 .0388 Nano8 .0250 .0388 Nano9 .0500 -.0045 Nano10 .0000 -.0045 Nano11 .0500 -.0045 Nano12 -.0250 -.0478 Nano13 .0250 -.0478 Nano14 -.0500 -.0911 Nano15 .0000 -.0911 Nano16 .0500 -.0911 Nano17 -.0750 -.1344 Nano18 -.0250 -.1344 Nano19 .0250 -.1344 Nano20 .0750 -.1344 Nano

PC Tail Wire Diameter By Contact Size #23 contact uses #24 wire Ø.020 Micro contact uses #26 wire Ø.016 Nano contact uses #30 wire Ø.010

SERIES 88

SuperFly® ConnectorsVertical PCB Footprints Viewed from rear PC tail side of unshrouded (Type A) insert. Use mirror image for shrouded (Type B) insert.

15© 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 88 SuperFly® CatalogDimensions in Inches (millimeters) are subject to change without notice.

A

Insert Arrangement PCB Footprint Contact Location

J44N

45°

4x 90°

Ø.509 (12.93)Ø.458 (11.63)

4x .080 (2.03)

4x Standoff

44434241403938

53 4

13 14 1520 21 22 23 24 25 26

27 28 29 30 31 32 3334 35 36 37

1 26 7 8 910 11

12 16 17 1819

Ø.569 (14.45)

0

0

Y

X

Tag X Loc Y Loc Size1 -.1000 .1299 Nano2 -.0500 .1299 Nano3 .0000 .1299 Nano4 .0500 .1299 Nano5 .1000 .1299 Nano6 -.1250 .0866 Nano7 -.0750 .0866 Nano8 -.0250 .0866 Nano9 .0250 .0866 Nano10 .0750 .0866 Nano11 .1250 .0866 Nano12 -.1500 .0433 Nano13 -.1000 .0433 Nano14 -.0500 .0433 Nano15 .0000 .0433 Nano16 .0500 .0433 Nano17 .1000 .0433 Nano18 .1500 .0433 Nano19 -.1750 .0000 Nano20 -.1250 .0000 Nano21 -.0750 .0000 Nano22 -.0250 .0000 Nano

Tag X Loc Y Loc Size23 .0250 .0000 Nano24 .0750 .0000 Nano25 .1250 .0000 Nano26 .1750 .0000 Nano27 -.1500 -.0433 Nano28 -.1000 -.0433 Nano29 -.0500 -.0433 Nano30 .0000 -.0433 Nano31 .0500 -.0433 Nano32 .1000 -.0433 Nano33 .1500 -.0433 Nano34 -.1250 -.0866 Nano35 -.0750 -.0866 Nano36 -.0250 -.0866 Nano37 .0250 -.0866 Nano38 .0750 -.0866 Nano39 .1250 -.0866 Nano40 -.1000 -.1299 Nano41 -.0500 -.1299 Nano42 .0000 -.1299 Nano43 .0500 -.1299 Nano44 .1000 -.1299 Nano

J7W19N

45°

4x 90°

Ø.509 (12.93)Ø.458 (11.63)

4x .080 (2.03)

4x Standoff

252423

18151411

2622

21201917

16131210

98

7

6

54

3

2

1

X

Y

0

0

Ø.569 (14.45)

Tag X Loc Y Loc Size1 -.1299 -.0850 #232 -.1477 .0160 #233 -.0964 .1049 #234 .0000 .1400 #235 .0964 .1049 #236 .1477 .0160 #237 .1299 -.0850 #23

Tag X Loc Y Loc Size8 -.0250 .0613 Nano9 .0250 .0613 Nano10 -.0500 .0180 Nano11 .0000 .0180 Nano12 .0500 .0180 Nano13 -.0750 -.0253 Nano14 -.0250 -.0253 Nano15 .0250 -.0253 Nano16 .0750 -.0253 Nano17 -.0500 -.0686 Nano18 .0000 -.0686 Nano19 .0500 -.0686 Nano20 -.0250 -.1119 Nano21 .0250 -.1119 Nano22 -.1000 -.1552 Nano23 -.0500 -.1552 Nano24 .0000 -.1552 Nano25 .0500 -.1552 Nano26 .1000 -.1552 Nano

PC Tail Wire Diameter By Contact Size #23 contact uses #24 wire Ø.020 Micro contact uses #26 wire Ø.016 Nano contact uses #30 wire Ø.010

SERIES 88

SuperFly® ConnectorsVertical PCB Footprints Viewed from rear PC tail side of unshrouded (Type A) insert. Use mirror image for shrouded (Type B) insert.

16 © 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 88 SuperFly® Catalog Dimensions in Inches (millimeters) are subject to change without notice.

A

Insert Arrangement PCB Footprint Contact Location

K19M

45°

4x 90°

Ø.528 (13.41)Ø.477(12.11)

4x Standoff

4x .080 (2.03)

1815

3

1917161413

12111098

7654

21

0

0

Y

X

Ø.588 (14.94) Tag X Loc Y Loc Size1 -.0650 .1126 Micro2 .0000 .1126 Micro3 .0650 .1126 Micro4 -.0975 .0563 Micro5 -.0325 .0563 Micro6 .0325 .0563 Micro7 .0975 .0563 Micro8 -.1300 .0000 Micro9 -.0650 .0000 Micro10 .0000 .0000 Micro

Tag X Loc Y Loc Size11 .0650 .0000 Micro12 .1300 .0000 Micro13 -.0975 -.0563 Micro14 -.0325 -.0563 Micro15 .0325 -.0563 Micro16 .0975 -.0563 Micro17 -.0650 -.1126 Micro18 .0000 -.1126 Micro19 .0650 -.1126 Micro

K13M19N

45°

4x 90°

Ø.528 (13.41)Ø.477 (12.12)

4x .080 (2.03)

4x Standoff

Ø.588 (14.94)

X

Y

0

0

1

4

5

67

89

10

11

12

13 14 1617 20

21 25

26 2930 32

315

1822

2731

1923

28

24

2

Tag X Loc Y Loc Size1 -.0415 .1546 Micro2 .0415 .1546 Micro3 .1081 .1180 Micro4 .1504 .0548 Micro5 .1587 -.0209 Micro6 .1311 -.0918 Micro7 .0739 -.1420 Micro8 .0000 -.1600 Micro9 -.0739 -.1420 Micro10 -.1311 -.0918 Micro11 -.1587 -.0209 Micro12 -.1504 .0548 Micro13 -.1081 .1180 Micro

Tag X Loc Y Loc Size14 -.0500 .0866 Nano15 .0000 .0866 Nano16 .0500 .0866 Nano17 -.0750 .0433 Nano18 -.0250 .0433 Nano19 .0250 .0433 Nano20 .0750 .0433 Nano21 -.1000 .0000 Nano22 -.0500 .0000 Nano23 .0000 .0000 Nano24 .0500 .0000 Nano25 .1000 .0000 Nano26 -.0750 -.0433 Nano27 -.0250 -.0433 Nano28 .0250 -.0433 Nano29 .0750 -.0433 Nano30 -.0500 -.0866 Nano31 .0000 -.0866 Nano32 .0500 -.0866 Nano

L22M

45°

4x 90°

Ø.568 (14.43)Ø.517 (13.13)

4x .080 (2.05)

4x Standoff

19 22

1815

3

2120

171614

13121110

98765421

0

0

Y

X

Ø.628 (15.95) Tag X Loc Y Loc Size1 -.0975 .1126 Micro2 -.0325 .1126 Micro3 .0325 .1126 Micro4 .0975 .1126 Micro5 -.1300 .0563 Micro6 -.0650 .0563 Micro7 .0000 .0563 Micro8 .0650 .0563 Micro9 .1300 .0563 Micro10 -.0975 .0000 Micro11 -.0325 .0000 Micro

Tag X Loc Y Loc Size12 .0325 .0000 Micro13 .0975 .0000 Micro14 -.1300 -.0563 Micro15 -.0650 -.0563 Micro16 .0000 -.0563 Micro17 .0650 -.0563 Micro18 .1300 -.0563 Micro19 -.0975 -.1126 Micro20 -.0325 -.1126 Micro21 .0325 -.1126 Micro22 .0975 -.1126 Micro

PC Tail Wire Diameter By Contact Size #23 contact uses #24 wire Ø.020 Micro contact uses #26 wire Ø.016 Nano contact uses #30 wire Ø.010

SERIES 88

SuperFly® ConnectorsVertical PCB Footprints Viewed from rear PC tail side of unshrouded (Type A) insert. Use mirror image for shrouded (Type B) insert.