Post on 14-Sep-2018
transcript
The SMI-175 is a heavy walled, hurricane resistant impact
window wall system capable of achieving very high
wind load demands. Its thick walled construction allows
Aldora to achieve these loads with large glass panels
and minimal mullion interruption. With just 4 extrusions,
the simplicity in design of the system allows it to be
easily fabricated. Its screw spline assembly creates the
ability to factory pre-glaze storefront or window panels.
The SMI–175 is a wet seal, non-weep system designed to
not let water penetrate.
SERIES SMI-175FIXED WINDOW WALL SYSTEM
FEATURES:n Aluminum alloy 6063-T6n Horizontal and vertical framing members 1 3/4” by 4 1/2”n Screw spline assemblyn Stainless steel assembly screwsn High design pressuresn Non-weep sealed system OPTIONS:n Pre-fabricated framesn Pre-glazed framesn Stretch-forming for radius shapesn Segmented radius
ALDORA ALUMINUM & GLASS PRODUCTS
www.Aldora-Architectural.com
11500 Miramar Parkway Suite 300 • Miramar, FL 33025Ph: 954.784.6900 Fax: 954.784.6901
7421 East Spartan Boulevard • Charleston, SC 29418Ph: 800-868-4527 Fax: 800-314-4436
SERIES SMI-175FIXED WINDOW WALL SYSTEM
n Screw Spline Assemblyn Total of 4 Extrusions
n Wet Seal System
DETAILS
PERFORMANCE
GLASS LOADS
Uvekol 9/16” Annealed
TAS 201 Passed
TAS 202 Passed
TAS 203 Passed
ANSI Z97 Passed
+63/-63 psf
15 lbs.
Miami Dade NOA and Florida Building Code Approved
Non-Reinforced
42” x 120” 60” x 120” (PVB 32” x 120”)
+90/-90 psf +100/-120 psf
PVB 9/16” Heat Strengthened
Uvekol 9/16” Heat Strengthened
WATER
MAX PANEL SIZE
TESTINGPROTOCOL
U:\
Jim\
Jim
Deta
ils.d
wg, 1
1/19
/20
13 11
:29:
41 A
M
SM-175 snapped into K-2 door Intermediate jamb with full reinforcement
+63/-63 psf
PVB 9/16” Annealed
Head and sill detail with 9/16” glazing
U:\
Jim\
Jim
Deta
ils.d
wg, 1
1/19
/20
13 11
:29:
41 A
M Intermediate horizontal with 9/16” glazing
U:\
Jim\
Jim
Deta
ils.d
wg, 1
1/19
/20
13 11
:32:
54 A
M
U:\
Jim\
Jim
Deta
ils.d
wg, 1
1/19
/20
13 11
:32:
54 A
M
Reinforced