Show110 | Using the XPages Extension Library for the Real World

transcript

Show110 Using the XPages Extension Library for the Real WorldPaul Hannan | Software Engineer | IBMTony McGuckin | Software Engineer | IBM

Date: Wednesday, January 18th 2012 Time: 04:30 PM - 06:15 PM

Legal disclaimer

The information contained in this publication is provided for informational purposes only. While efforts were made to verify the completeness and accuracy of the information contained in this publication, it is provided AS IS without warranty of any kind, express or implied. In addition, this information is based on IBM’s current product plans and strategy, which are subject to change by IBM without notice. IBM shall not be responsible for any damages arising out of the use of, or otherwise related to, this publication or any other materials. Nothing contained in this publication is intended to, nor shall have the effect of, creating any warranties or representations from IBM or its suppliers or licensors, or altering the terms and conditions of the applicable license agreement governing the use of IBM software.

References in this presentation to IBM products, programs, or services do not imply that they will be available in all countries in which IBM operates. Product release dates and/or capabilities referenced in this presentation may change at any time at IBM’s sole discretion based on market opportunities or other factors, and are not intended to be a commitment to future product or feature availability in any way. Nothing contained in these materials is intended to, nor shall have the effect of, stating or implying that any activities undertaken by you will result in any specific sales, revenue growth or other results.

IBM, the IBM logo, Lotus, Lotus Notes, Notes, Domino, Quickr, Sametime, WebSphere, UC2, PartnerWorld and Lotusphere are trademarks of International Business Machines Corporation in the United States, other countries, or both. Unyte is a trademark of WebDialogs, Inc., in the United States, other countries, or both.

All references to Renovations refer to a fictitious company and are used for illustration purposes only.

IBM’s statements regarding its plans, directions, and intent are subject to change or withdrawal without notice at IBM’s sole discretion.

Information regarding potential future products is intended to outline our general product direction and it should not be relied on in making a purchasing decision.

The information mentioned regarding potential future products is not a commitment, promise, or legal obligation to deliver any material, code or functionality. Information about potential future products may not be incorporated into any contract. The development, release, and timing of any future features or functionality described for our products remains at our sole discretion.

Agenda■ 1. Introduction■ 2. Installation and Deployment■ 3. Application Layout Control■ 4. Data View Control■ 5. Mobile■ 6. Q&A

About The Speakers■ Tony McGuckin – Software Engineer – IBM, Dublin, Ireland

─ With IBM since 2006– IBM® Lotus® Notes® Domino® XPages server runtime

• Product & Template development• Customer Enablement & Proof-of-Concept development

– Co-creator of global XPages@... Workshops─ IBM Lotus® OneUI Adoption Workgroup─ Co-author of Mastering XPages and XPages Portable Command Guide books

■ Paul Hannan – Software Engineer – IBM, Dublin, Ireland─ Is a senior software engineer and XPager in the IBM Ireland software lab in Dublin and is

also a member of the IBM® Lotus® Notes® Domino® XPages runtime team. He has worked on XPages from the beginning and before that too when the same technology was XFaces in Lotus Component Designer®. Previous to this he worked on JSF tooling for Rational Application Developer®, and before that on Notes Domino 6 back to Notes 3.3x and Lotus® ScreenCam®.

─ Twitter: @pdhannan─ Linkedin: http://www.linkedin.com/pub/paul-hannan/10/3bb/4b8─ Team Blog: www.xpagesdev.com─ Lead author of the XPages Extension Library book(April 2012)

Quick Survey■ How many of you know about XPages?■ How about the XPages Extension Library (ExtLib)?■ How many of you have used the ExtLib to build apps?■ Built apps that are now on production servers?■ How many are using the TeamRoom XL■ How built mobile apps?

Introduction■ What is this session about?

─ Show and tell how the XPages Extension Library is used in the production ready TeamRoom XL and Discussion XL templates (and DocLib XL – the big 3).

─ Reverse engineering an XPages app that uses the XPages Extension Library─ Learn about the next generation of XPages controls─ Learn how to build XPages applications more effectively, build them faster and perform better; all

using real life examples.─ Learn how to bring your applications beyond modernity with XPages Extension Library and will

into the future.

Introduction■ What is the Extension Library

─ A set of Java plug-ins that greatly extend XPages runtime functionality─ Works on web, Notes® client and mobile devices─ Installs on top of Lotus® Notes® Domino® 8.5.3─ Contains cool new IBM® Lotus® Notes® Domino® Designer® enhancements─ A fully accessible runtime library and templates ─ Enhanced Lotus Notes TeamRoom and Lotus Notes Discussion templates─ Online documentation ─ Runtime is localized─ Built to IBM globalization standards─ Implemented using the XPages Extensibility API─ IBM Lotus Notes Domino 8.5.3® Upgrade Pack 1® release is officially supported by IBM─ Source code included

■ No longer a play thing; this is production ready

Introduction■ What are “Upgrade Packs” | UP1?

─ Additional new features to existing Notes Domino releases■ Customers on active maintenance can download from IBM Passport

Advantage®■ IBM Business Partners can download from Partnerworld Software Access

Catalog™■ Download 1 zip for UP1 which contains install kits for the following

─ Lotus Notes® client– XPages Extension Library runtime

─ Lotus Domino® Designer®– XPages Extension Library runtime (for local preview)– Designer plugins for working with XPages Extension Library

─ Lotus Domino® & IBM XWork® Server– XPages Extension Library runtime– Domino Access Services (REST APIs)

Case Study: Quick Tour of the TeamRoom XL

Case Study: TeamRoom XL■ New TeamRoom XL from Lotus® Notes® Domino® 8.5.3 UP1

■ Using the OneUI Application Layout─ Consistent with Lotus UX. Title bar at the top, navigation on the left

Case Study: TeamRoom XL

■ The new “Home” page─ Showing Recent Activities – Unified Experience ; a “Project Vulcan”- live

feed of recent changes─ Using a Tag Cloud for easier identification of the most used categories

■ All Documents using a XPages Discussion-like UI─ The code in the Discussion template was improved and extracted to a drag-

and-drop control in the ExtLib, for ease of reuse─ Abstracts of the body text available in the view

■ Thread view page based on the OneUI “Comment in a Forum” component─ In-context editing in the Thread view, including response creation/editing─ With some refinements to better fit with Lotus Domino® views─ Again, extracted to a control for ease of re-use

Case Study: TeamRoom XL■ Select View and Filter mechanism

─ To simplify the UI design, uses multiple views of the same data on the same page, and provides a consistent UI for filtering categorized views to a specific category

─ Implementation uses the ExtLib Dynamic Content control, for switching between different content at a location in the page

Case Study: TeamRoom XL■ Simplification of the New / Edit Main Document UI

─ Makes the required and most commonly used fields more prominent

─ Using ExtLib controls for selecting and displaying Reviewer lists

Case Study: TeamRoom XL■ An XPages Calendar View

control─ Used to display in-

application calendar giving dates and times of team meetings, events, review due-dates etc

─ Single-click switching to day-at-a-glance, week, month, year modes

─ Was not previously available, a great addition to the ExtLib

─ Client side support for Drag 'n Drop, Delete, Double-Click edit etc

■ Pager state restoration ─ When you click into a doc and then return to the view, the re-displayed view

remembers the page number

■ Members thumbnail photos─ The ExtLib gives a unified API for user information, including thumbnail

photos─ The TeamRoom is using photos stored in the NSF

■ Member creation using Name Picker control ─ ExtLib control with directory integration

■ Members view using multi-column view control configuration

Installation and Deployment■ Installation and deployment the XPages Extension Library depends on where it

is downloaded from...1) Lotus Notes® Domino 8.5.3 Upgrade Pack 1 (UP1) from IBM2) 8.5.3 updatesite from OpenNTF

■ Step through the Domino Designer® install from UP1 and an overview of the Server and Notes Client installs

■ Step through the OpenNTF Server and Domino Designer® client deployment using the UpdateSite.NSF

Installation and Deployment | Upgrade Pack■ Designer Client Install from 8.5.3 Upgrade Pack 1

Installation and Deployment | Upgrade Pack■ The 853 Upgrade Pack Download

from Passport Advantage■ 853UpgradePackInstalls.zip■ One big zip under the same

part number

Installation and Deployment | Upgrade Pack■ Unpack the big Zip file contains 3 folders; client, designer and domino.■ Plus a readme.txt file

Installation and Deployment | Upgrade Pack■ The 'server' install contains the

addon installs for AIX32, AIX64, iSeries, Linux, Solaris, Win32, Win64 and zSeries.

■ The 'client' folder contains 3 Notes client addon installs for Windows®, Apple® Mac® and Linux.

■ The 'designer' folder contains the one installable for Windows

Installation and Deployment | Upgrade Pack■ Designer Client Install from UP1■ Running the '853UpgradePack1_20111208-0717.exe' from the 'extlib-designer-

add-win32' folder in 'designer' launches the install program■ In Microsoft® Windows7TM, a prompt will appear to accept that the program is

about to make changes to the computer.

Installation and Deployment | Upgrade Pack■ Designer Client Install from UP1■ First install screen

─ You've two choices here; unpack the files; then install and then delete the install package; the second choice is to preserve the install files

Installation and Deployment | Upgrade Pack■ Designer Client Install from UP1■ The Welcome screen■ Select Next here

Installation and Deployment | Upgrade Pack■ Designer Client Install from UP1■ This is the key part, accepting the UP1 licence from IBM.

Installation and Deployment | Upgrade Pack■ Designer Client Install from UP1■ Make sure you don't have the Notes Standard All Client running before

attempting this install

Installation and Deployment | Upgrade Pack■ Designer Client Install from UP1■ Click the Install button to begin

Installation and Deployment | Upgrade Pack■ Designer Client Install from UP1■ ...installing...

Installation and Deployment | Upgrade Pack■ Designer Client Install from UP1■ ...and you're done!

Installation and Deployment | Upgrade Pack■ Designer Client Install from UP1■ Complete!

─ New Designtime installed | \\\notes\framework\shared\eclipse─ New Client runtime for the Extlib | \\\notes\framework\shared\eclipse─ Preview server installed with Extlib | \\\notes\osgi\extlib\eclipse─ The TeamRoom XL and Discussion XL templates | \\\notes\data\

■ You are now ready to build the next generation of XPages Applications.

Installation and Deployment | Upgrade Pack■ Designer with the Extension Library

Installation and Deployment | Upgrade Pack■ Discussion XL app on XPiNC

Installation and Deployment | Upgrade Pack■ Discussion XL app on the preview Server

Installation and Deployment | OpenNTF■ Alternative deployment for OpenNTF release■ The 853 ExtLib UpdateSite NSF Deployment■ Domino 8.5.3 contains a feature which makes it easy for the

administrator to deploy and update an Extension Library without the need to manually copy any files to the Domino Server.

■ Using a standard NSF based on updateSite.ntf the administrator can dynamically deploy OSGi plugins to the server.

■ This new feature is optional and simple to use. ■ By default the dynamic contribution is turned off. ■ Use notes.ini setting OSGI_HTTP_DYNAMIC_BUNDLES■ OSGI_HTTP_DYNAMIC_BUNDLES=updateSite2.nsf for example.■ Not available in 852

Installation and Deployment | OpenNTF■ Select CTRL+N to create a new application■ Name the application what you wish, but use the template...■ Eclipse Update Site (8.5.3)

updatesite.ntf

Installation and Deployment | OpenNTF■ This is the app

created and how it appears whenlaunched in Notes.

Installation and Deployment | OpenNTF■ We can now import the updatesite which is extracted from any zip from the

OpenNTF release - updateSiteOpenNTF-designer.zip

■ Select the Import Local Update Site Button

Installation and Deployment | OpenNTF■ Select the 'site.xml' from the extracted zip file■ Then select OK on this dialog box

■ This will begin the import process to the Update Site NSF

Installation and Deployment | OpenNTF

■ Once that is done, restart the server or...■ 'restart task http'

Installation and Deployment | OpenNTF■ Run restart task http at the server console

■ Console should return the message “...NSF Based plugins are being installed in the OSGi runtime...”

Installation and Deployment | OpenNTF■ Now that the server is done,■ we can point a Designer client at the same NSF, install the same updatesite

and match what is on the server

Installation and Deployment | OpenNTF■ Must have Enable Eclipse plug-in

install checked in Preferences

Installation and Deployment | OpenNTF■ Select the option to search for

new features to installand then Next.

Installation and Deployment | OpenNTF■ Select the Add Remote

Location button■ Type in a name and then the

URL to the Update Site NSFon your server

■ Then select OK on the Add Remote Site dialog

Installation and Deployment | OpenNTF■ This adds a location to the

dialog■ Select this and then Finish

Installation and Deployment | OpenNTF■ This will then fetch the list of features to install.■ We usually select all

here, but individual pieces can be selectedthough not advised asthis can lead to a mismatch in the code

Installation and Deployment | OpenNTF■ Accept the licence■ Here is the screenshot for the

Apache licence from OpenNTF

■ Accept this and click Next to proceed.

Installation and Deployment | OpenNTF■ This lists what you are about

to install in Designer

Installation and Deployment | OpenNTF■ The releases to OpenNTF include un-signed jars.■ This dialog prompts you to accept these unsigned jars■ NOTE: the jars from the Update Pack install are signed by IBM they are not from

OpenNTF

Installation and Deployment | OpenNTF■ And you are done. All that is left to do is to restart your Designer (and the other

Notes clients)!

Installation and Deployment | OpenNTFOnce Designer has been restarted, both the server and the Designer client will be using the same version of the OpenNTF XPages Extension Library

Installation and Deployment■ Summary | Main points to take away

─ Install and deployment depends on from where the ExtLib is downloaded─ The ExtLib with the Upgrade Packs are supported by IBM─ Upgrade Pack install is an executable and straight forward, just like any other installation─ Updating the Upgrade Packs will be straight forward too─ The ExtLib from OpenNTF isn't supported by IBM but contains more features─ The UpdateSite NSF and OSGi bundling in 853 is the preferred way to deploy the OpenNTF

version of the ExtLib on the server (not supported for production UP)─ TeamRoom XL and Discussion XL are available from both download sources as well (OpenNTF

= not signed | UP1 = signed)

■ Overview of the Application Layout control■ Explain how this control is typically used■ Show how this control in a simple example

Application Layout Control – What is this section about?

■ Get a running OneUI application in less than 5 minutes!■ Fully customizable OneUI rendering■ Abstracts all the OneUI application parts■ Can even be customized by providing an inherited renderer

Application Layout Control

Application Layout Control■ Exposed in Domino

Designer's control palette along with several property categories and supported facets

Application Layout Control■ Used in the new TeamRoom XL, Discussion XL and DocLib XL templates■ Most effective when used on a single Custom Control that is shared

across several XPages within an application─ In-line with the Layout Container Pattern

■ Exposed in Domino Designer's control palette along with several property categories

Getting to grips with it...

Application Layout Control – TeamRoom XLSeveral XPages

allDocuments.xsp

search.xsp

events.xsp

calendar.xsp

announcements.xsp

home.xsp

Several XPages+

One Custom Control

layout.xsp (Custom Control)

allDocuments.xsp

search.xsp

events.xsp

calendar.xsp

announcements.xsp

home.xsp

Application Layout Control – TeamRoom XL

Several XPages+

One Custom Control=

Layout ContainerPattern

allDocuments.xsp

search.xsp

events.xsp

calendar.xsp

announcements.xsp

home.xsp

<xe:applicationLayout/>

allDocuments.xsp (XPage)

<xc:layout/>

allDocuments.xsp (XPage)

<xc:layout/>

Zero to App Layout Hero...

■ In a TeamRoom XL based database...─ Create two blank XPages

– Name both XPages as follows:• xpOne and xpTwo

─ Create a new Custom Control– Name the Custom Control as follows:

• CcLayoutContainer■ In the WYSIWYG editor for the ccLayoutContainer Custom Control...

─ From the Extension Library category of the Control Palette– Drag'n'drop an Application Layout control

■ Once you drag'n'drop the Application Layout control to the ccLayoutContainer Custom Control a wizard dialog appears

─ This wizard assists you in configuring the Application Layout

■ Choose “OneUI Application Configuration” from the Configuration options list (1.)

■ Check all the checkboxes available for the different types of Area (2.)

■ Choose the oneuiv2_1_blue from the Application Theme options list (3.)

─ Though this theme on the Discussion template. Any theme from the app can be selected here.

■ Click the OK button

■ An instance of the Application Layout control will now reside on the ccLayoutContainer Custom Control

■ You should Save all your changes at this point

■ Drag'n'drop an instance of the ccLayoutContainer Custom Control unto each of your previously created XPages (xpOne and xpTwo)

■ Again, Save all your changes

■ Ensure you have saved all your changes to xpOne, xpTwo, and ccLayoutContainer

■ Now open the xpOne and xpTwo XPages in a web browser

■ You should see both pages with a header bar and footer links

■ A number of resources, title, and pageIcon have also been automatically added

■ You can also view the source of each page to study the emitted HTML markup structure

■ You can now continue to configure the Application Layout control to establish a shared layout for the xpOne and xpTwo XPages

■ Select the ccLayoutContainer Application Layout control instance in Designer

■ Choose the Title Bar category in the Properties panel

■ Then add text to the Title text field

■ Save your changes

■ Click on the Add Item button─ Select Page Link Node from the options

list─ Repeat this step so that there are

two of these nodes

■ You will now have two Page Link Nodes in the Title Bar Area■ Set the label and page properties accordingly for each one using the Property

editor

■ Using the ccLayoutContainer Custom Control, type some text into the middle area facet and the LeftColumn facet

■ Save your changes

■ Refresh the xpOne XPage in the web browser■ You will now see the configuration of your Application Layout being reflected

within the different areas of the page

Application Layout Control■ Summary | Main points to take away

─ You have learnt how the TeamRoom XL, Discussion XL, and DocLib XL templates use the same Layout Container pattern with the Application Layout control

─ You have successfully created an Application Layout layout container that can be shared throughout the application

─ By using this design pattern you can quickly establish a common layout and configuration for an application

The Data View | What is this section about?■ Give an overview of this control■ Highlight and explain the various elements of the control■ Then build a Data View from scratch in 20 easy steps

The Data View (xe:dataView)

The Data View (xe:dataView)■ The Data View control is used everywhere – web and mobile■ Extended from the View Panel control and is more flexible■ One of the most used ExtLib control■ Has\Will become the main control for displaying a document collection■ You need to know this control

The Data View (xe:dataView)

The Data View (xe:dataView)■ Let's build a Data View from scratch■ Create a blank XPage on a Discussion XL app, expand the Extension Library

drawer on the palette■ Select the Data View control and drag it to the page (1.)■ Then in the following dialog select the 'xpAllDocuments' view as the data

source for the Data View. (2.)■ OK this.

The Data View (xe:dataView)■ A representation of the Data View will now appear on the Design pane■ This needs further configuration before anything displays■ So lets start by displaying the topic title from the view data source

The Data View (xe:dataView)■ Go to the All Properties of the Data View and locate the attribute

'summaryColumn' in the Format section■ Select the complex type xe:viewSummaryColumnfrom the add button that'll

appear■ And then type in the name of the column you wish to display here – in this case

'Topic' into columnName■ Save and preview this page.

The Data View (xe:dataView)■ This is enough to give us our first look at the Data View on the web browser■ Save your changes. Then view the results from Designer by selecting from the

main menu Design – Preview in Web Browser – Default System Web Browser

The Data View (xe:dataView)■ We can add column titles by adding a columnTitle for summaryColumn and

setting 'columnTitles' to true

The Data View (xe:dataView)■ Let's add some details to the view entry■ To the 'details' editable area we add a Panel container control.■ This becomes the facet for 'detail' - <xp:panel xp:key="detail">

The Data View (xe:dataView)■ Then to the Panel we add a Computed Field control.■ We are going to use this field to compute the Author and date the document was

composed

The Data View (xe:dataView)■ The Computed Field is configured by combining two column values from the

view data source of the Data View

■ The Data View variable hasn't been set yet so lets do that now...

The Data View (xe:dataView)■ Select the Data View and to the 'var' property set the value – 'dview1'

■ Just one more thing and that's to show these details.

The Data View (xe:dataView)■ Set the property 'expandedDetails' to true...

■ So at runtime thesedetails now display

The Data View (xe:dataView)■ We can add more detail here that'll give us a preview of the document in that row

─ like pulling in the value of the 'Abstract' column from the view─ Adding actions, like a reply link─ Display the documents tags

■ So first add a newPanel, and set aname to it(so it could beused for partial refresh ifneeded)

The Data View (xe:dataView)■ Add a Computed Field to previewPanel and set the value to get the value of the

'Abstract' column.

The Data View (xe:dataView)■ Save your changes.■ Then preview this update at runtime on a web browser

The Data View (xe:dataView)■ Sometimes you may not want the details to show when the Data View is first

launched, but would like an option to display the details when needs be. Here's how.

■ Clear the value on the expandedDetail property

■ And set collapsibleDetail to true

The Data View (xe:dataView)■ The Data View with collapsible detail

The Data View (xe:dataView)■ The Data View indents response documents by default. We can add a twisty

here to parent documents to expand and collapse those rows.

The Data View (xe:dataView)■ Pagers can be added to the Data View just like the View Panel, Repeat and

Data Table■ There's six available facets on the Data View to add the Pager

The Data View (xe:dataView)■ Once the pager has been dropped into any editable area, it's 'for' property

needs to be set to that Data View.

The Data View (xe:dataView)■ Set also the row count, 15 rows, at this stage to see the pager.

The Data View (xe:dataView)■ Use the Extra Column feature to include more columns from the view data

source in the Data View.■ Go to the extraColumns property and select the plus '+' button to add a column

The Data View (xe:dataView)■ This will add a viewExtraColumn[0] complex type■ The columnName property here corresponds to the column name on the data

source – in this case it is 'Date'

■ More columns can be added and these will appear to the right of the first column

The Data View (xe:dataView)■ The Data View with extra columns

The Data View (xe:dataView)■ Categorization is also handled by the Data View■ Take the By Category view from the Discussion template■ This too can be represented in the

Data View

The Data View (xe:dataView)■ First step is to create a new Data View like before but using the By Category

view as the data source.■ Set the summaryColumn property to use the Topic column like before.■ Save and preview

in a web browser

The Data View (xe:dataView)■ Back on the Data View locate the categoryColumn property and select the plus

button

■ And then set the columnName property to 'categories', from the view data source

The Data View (xe:dataView)■ The categorized Data View.

The Data View (xe:dataView)■ Sub categories can be added in the same way by adding a new

viewCategoryColumn after the first category

The Data View (xe:dataView)■ Summary | Main points to take away

─ The main container control used to display a data collection in the TeamRoom and Discussion XL templates

─ Inherits from the View Panel control

XPages Mobile | What is this section about?■ Give an overview of what the new XPages Mobile controls are■ Show and explain how these controls are use to build a simple XPages Mobile

application■ Quick tour of how these controls are used in the Discussion XL template■ Explain the typical design patterns of the XPages Mobile application, using the

Discussion XL template as an example

XPages Mobile Applications – what are they?■ These apps build new and extend the reach of existing applications to smart

phones and tablets─ Provide pervasive access to Notes/Domino data from your mobile device

– Apple IOS® 4 & 5 (iPhone™, iPad™ and iPod Touch™) – Android™ 2.3 (phones) and 3.x (tablets)

─ Improve business process efficiency by allowing decision makers to approve workflows on the go

■ Enable templates with mobile access─ Enable existing applications by refreshing the design─ TeamRoom & Discussion XL (UP1 and DocLib in UP2) templates

■ Extend the XPages framework to support mobile web browsers─ Make it easy to develop mobile applications with the technology you know─ One programming model for mobile, desktop browser and rich client

Domino Templates go Mobile■ Demo of the TeamRoom XL and Discussion XL Templates...

Hello XPages Mobile Applications World■ In this exercise we are going to build a XPages Mobile Application from scratch■ Enhance a existing non Extension Library application ■ Enable it to use the XPages Extension Library■ Set the mobile app prefix in the xsp.properties■ Create the XPage■ Create the Single Page application■ Add the mobile pages to view documents■ These are the basic principles for XPages Mobile applications■ Built rapidly with little fuss...

Hello XPages Mobile Applications World■ Take any existing Application that inherits it's design from the Discussion

template (StdR85Discussion) - pre-UP1

Hello XPages Mobile Applications World

XPage (xp:view)

Single Page Application (xe:singlePageApp)

Mobile Page (xe:appPage) Mobile Page

(xe:appPage)

Hello XPages Mobile Applications World■ Enable the

application to use the XPages Extension Library

■ Select the Application Properties, then the Advanced Tab, and then under 'XPages Libraries' select the checkbox for 'com.ibm.xsp.extlib.library'

Hello XPages Mobile Applications World■ The next step is to add the Mobile Theme prefix -

xsp.theme.mobile.pagePrefix■ This will enable the XPages Mobile theme for XPages in the application that

begin with that prefix.■ Add the Package Explorer view to the Perspective if this hasn't already been

done.■ Do this by selecting...

─ Window─ Show Eclipse Views─ Package Explorer.

Hello XPages Mobile Applications World■ This should add the

Package Explorer view to beside main working set.

■ From here locate the existing application

■ Expand the WebContent\WEB-INF folder.

■ Then launch the xsp.properties file

Hello XPages Mobile Applications World■ Select the Source tab■ Then add the prefix to the source – xsp.theme.mobile.pagePrefix=m_■ In this case we have chosen the

prefix 'm_', though you can select any prefix you like.

Hello XPages Mobile Applications World■ Create a new XPage with the with the mobile theme prefix

Hello XPages Mobile Applications World■ On the new XPage, drag and drop from the Mobile palette the Single Page

Application Control.■ The Single Page Application Control (xe:singlePageApp) is the container for the

XPages Mobile application.

Hello XPages Mobile Applications World■ Then add a Mobile Page control to the Single Page Application. And save the

changes to the XPage.■ This will cause an error.■ The Single Page Application

needs to have the selectedPageNameproperty set!

Hello XPages Mobile Applications World■ So, to resolve this error we must first name the Mobile Page that was added to

the Single Page Application■ Then use this Page Name to fill out the selectedPageName property.

Hello XPages Mobile Applications World■ Add a Heading control (xe:djxmHeading) to the Mobil Page. This will be the

header for the mobile page, containing the Back button, header label and the actionFecet editable area.

Hello XPages Mobile Applications World■ To the header enter a

value for the label.■ The XPages Mobile

application is now ready to have a first look at it on a mobile device or a web kit browser...

Hello XPages Mobile Applications World■ Running the XPages Mobile App on a Web Kit browser - Chrome

Hello XPages Mobile Applications World■ The next step is to add a view to the Mobile Page. From the Extension Library

palette select the Data View and Add that to the MobilePage (1.)

■ This willdisplay a dialogBox. And from here(2.) Choose the xpAllDocuments view

Hello XPages Mobile Applications World■ After the Data View has been added to the Mobile page, we want to set one

property, the summaryColumn. Select this complex type (1.) and then on xe:viewSummaryColumnselect columnNameand enter the value here for the Topic view (2.).

■ Now let's have a look at this page on the web kit browser

Hello XPages Mobile Applications World■ The Documents display now in the row.

Hello XPages Mobile Applications World■ We're going to add a second mobile page to the single page application. This is

going to be the mobile page in which we'll display documents■ Drag and drop another Mobile Page control to the Single Page Application■ And give this Mobile

Page a name - pageName = ”documentPage”

Hello XPages Mobile Applications World■ Add a Heading control to the “documentPage” (1)■ And for this header the following properties are set.

─ Firstly the back property is'Back' – this is the label of the back button (2a).

─ The header label is set to 'Document Page' (2b).─ Then the moveTo property

is then set to 'viewPage' - this is the location on the page - Single PageApplication - to which this action is to go'back' to (2c)

Hello XPages Mobile Applications World■ Next, add (1.) a Panel container control after the Heading control on the Mobile

page■ Then to this Panel add a document data source

─ Select the Data panel and then the Add dropdown button─ Choose the Domino Document option (2.)─ Then select the MainTopic

form from the Form combobox (3.) as the document data source forthe Panel

Hello XPages Mobile Applications World■ Then add a Rounded List control to the Panel. This will add additional styling

to the document page

Hello XPages Mobile Applications World

■ And to the Rounded List container control add labels and bound input fields from the Data pane.

─ Though avoid using Tables in mobile apps – used here for demo purposes

Hello XPages Mobile Applications World■ Go back to the Data View. ■ Here set the pageName to 'documentPage' (1.) and another property

'openDocAsReadonly' to true (2.)

Hello XPages Mobile Applications World■ Then finally 'resetContent' property

■ For the 'viewPage', set this to false

■ And for the 'documentPage' set it to 'true'

Hello XPages Mobile Applications World■ Now we can see the results of our changes. ■ The document should now open in the documentPage with the 'Back' allowing

the user to navigate back.

Discussion XL Template for Mobile ■ Tour around the Discussion XL app

Discussion XL Template for Mobile ■ Peel apart the 'mobile.xsp' page

Discussion XL Template for Mobile ■ The contents of each mobile page is contained within custom control.■ Why?■ Easier to work with and maintain ■ Notice here that not all

custom controls were initially designed for Mobil

■ Reuse, reuse, reuse e.g. allDocumentsView

Discussion XL Template for Mobile ■ The allDocumentsView serves as a content for a XPages mobile page■ Design elements are loaded when the loaded in a device – isMobile() - e.g. on a

controls loaded property "${javascript:isMobile()}"' ─ isMobile() is a function defined in /mobile-server.jss (this is a Server JavaScript file contained within

the Discussion XL and TeamRoom XL templates)

Discussion XL Template for Mobile ■ The isMobile method can also be used else where to reuse design elements

─ Change the default row count in a Data View─ Change the page to open─ And used to not load elements in Mobile - !isMobile

■ Rip and Replace not required

Discussion XL Template for Mobile ■ The Heading Control's actionFacet - buttons used to create a save documents■ This is a callback area where buttons take on the typical Mobile look and feel.

■ And in Designtime■

Discussion XL Template for Mobile ■ Other action buttons in the template reuse existing design elements■ Though these elements need specific styling for Mobile

Discussion XL Template for Mobile ■ Navigation - Transitioning between XPages Mobile Pages - MoveTo and Back

button■ The MoveTo is used to navigate to another mobile page within the Single Page

Application.─ The simple action MoveTo action can also save the document

■ The Back button returns the user to the previous Mobile page. It can also be used as a cancel or close button to a Mobile page

■ What's important is how the pages transition between each other, especially when the transition type is 'slide' rather then 'fade' or 'flip'

Discussion XL Template for Mobile ■ Slide transition – going to a page

─ Opening a document─ Creating a new document

■ ...transition is usually Left-To-Right

■ Slide transition – returning from a document or view

─ Closing a document to return to a view─ Saving a new document─ Saving changes─ Cancelling change─ Or using the back button

■ ---transition is usually Right-to-Left

Discussion XL Template for Mobile ■ How the Default XPage launch works for Mobile applications

─ Currently no setting for setting the default XPage for Mobile devices─ An alternative technique is used in the Discussion and TeamRoom XP templates – see

main.xsp■ context.getUserAgent().getUserAgent() is used to get the platform the

application is running upon and then redirects to the appropriate XPage

Mobile■ Summary | Main points to take away

─ XPages Mobile Apps are essentially Web Apps─ Limited number of controls use the Mobile Theme | All controls in the Mobile palette, Data View

and Outline─ Support for iOS and Android─ XPages mobile apps are usually contained within the one XPage – uses Dojo view swapping to

move between mobile pages

Reference:■ Wiki documentation on the ExtLib in the Upgrade Pack

─ http://www-10.lotus.com/ldd/ddwiki.nsf/xpViewCategories.xsp?lookupName=Domino Designer XPages Extension Library

■ The Notes Domino 8.5.3 Upgrade Pack download from IBM Passport Advantage─ http://www-01.ibm.com/software/howtobuy/passportadvantage/

■ The XPages Extension Library on OpenNTF─ http://extlib.openntf.org

■ XPages Info─ http://xpages.info

■ XPages Mobile Controls Tutorial─ http://www-10.lotus.com/ldd/ddwiki.nsf/dx/XPages_Mobile_Controls_Tutorial_

XPages Extension Library Book■ Factoids...

─ Comprehensive 600 page volume─ IBM Press publication─ Authored by a team of all-star XPages experts,

Featuring contributions from key community members─ Take full advantage of the XPages Extensibility

Framework, Library & API─ Step-by-step guide for developers of all experience levels─ Combines reference material and practical use cases

■ Coming Soon

■ Available Q2 – 2012

─ www.ibmpressbooks.com/bookstore/product.asp?isbn=0132901811─ www.amazon.com/XPages-Extension-Library/dp/0132901811

XPages Portable Command Guide Book■ Factoids...

─ Compact 320 page volume─ IBM Press publication─ Authored by members of XPages & Domino Designer dev teams─ Perfect complement to the popular Mastering XPages book,

helping experienced XPages developers go even further─ Thoroughly covers XSP properties, Command Manager

instructions, INI variables, OSGi console commands,debugging, logging and more.

─ Dozens of practical examples providing immediate solutions

■ Available soon online

─ www.ibmpressbooks.com/bookstore/product.asp?isbn=0132943050─ www.amazon.com/XPages-Portable-Command-Guide/dp/0132943050

Mastering XPages Book■ Factoids...

─ Compact 750 page Best Selling volume─ IBM Press publication─ Authored by members of XPages & Domino Designer dev teams─ The popular Mastering XPages book, helping experienced

XPages developers go even further─ Dozens of practical examples providing immediate solutions

■ Available NOW online

─ http://www.ibmpressbooks.com/bookstore/product.asp?isbn=0132486318─ http://www.amazon.com/Mastering-XPages-Step---Step-Application/dp/0132486318

Other Sessions That May Interest You

Sessions Speakers

JMP101: IBM Lotus Domino XPages Jumpstart Paul Della-NebbiaHoward Greenberg

JMP102: Introduction To Java for Domino Developers Paul Calhoun

JMP301: Master Class: eXtending IBM Lotus Domino Designer and Domino XPages Graham O'KeeffeDan O'Connor

JMP302: Master Class: Using Themes to control the look and feel of your IBM Lotus Domino XPages applications

Scott Good

JMP304: Master Class: Integration in the world of Social Business John HeadAndrew Barickman

INV309: Strategy in Action: Social Business Application Development Brent PetersPhilippe Riand

AD101: IBM Lotus Domino Version 8.5.3 Application Development and Beyond Pete JanzenMaureen G. Leland

AD102: Source Control For The IBM Lotus Domino Developer Declan Lynch

Sessions Speakers

AD103: Embracing the Eclipse Within Maureen G. Leland

AD104: IBM Lotus Domino XPages Made Social Philippe Riand

AD105: Use IBM Lotus Domino and XPages for your Social Business Herbert WaggerNiklas Heidloff

AD106: IBM Lotus Domino XPages anywhere - Write them once, See them Everywhere Stephan WisselViktor Krantz

AD107: IBM Lotus Domino XPages Meets Enterprise Data - Relational++ Andrejus Chaliapinas

AD108: The Grand Tour of IBM Lotus Notes and Domino 8.5.3 Upgrade Pack 1's XPages Capabilities

Martin Donnelly

AD109: Ready, Set, Go! How IBM Lotus Domino XPages Became Mobile Eamon Muldoon

AD110: IBM Lotus Domino XPages Go Zoom! Tony McGuckinDarin Egan

Sessions Speakers

AD111: The X Path: Practical guide to taking your IBM Lotus Notes applications to Domino XPages

Stephan WisselHunter R. Medney

AD113: Moving Forward with IBM Lotus Domino REST services Stephen Auriemma

AD114: Don't be afraid of curly brackets reloaded - even more JavaScript for LotusScript Developers

Stephan Wissel

AD306: Integrate your applications into IBM Websphere Portal Thomas Stober

BP103: IBM Lotus Domino XPages Blast! Matt WhiteTim Clark

BP107: IBM Lotus Notes/Domino Application Development Competitive Advantage : The Social Business Edition

David ViaJohn Head

BP109: Apps, Apps, and More Apps: Meet the Very Best Open Source Apps from OpenNTF - The 2012 Edition

Niklas HeidloffBruce Elgort

BP114: To IBM Lotus Domino XPages and Beyond! The Lotusphere Sessions Database Tim DavisBen Langhinrichs

Sessions Speakers

BP115: Deploying and Managing Your IBM Lotus Domino XPages Applications Warren ElsmoreMatt White

BP118: Using Java to build applications fit for the enterprise Chris Connor

BP120: One Application To Rule Them All Kathy BrownPaul Steel

SHOW110: Using the IBM Lotus Domino XPages Extension Library for the Real World Tony McGuckinPaul Hannan

SHOW111: How YOU deliver mobile applications the easy way with IBM Lotus Domino XPages Web Apps

Chris Connor

SHOW112: Domino OSGi development David TaiebPaul R. Fiore

Show110 | Using the XPages Extension Library for the Real World

Technology