Silk'n Face FX for skin rejuvenation

Post on 01-Jun-2015

12,483 views 4 download

Tags:

description

Silk'n FaceFX is an anti-aging treatment using LED light and infrared light.

transcript

Technology

• Phototherapy using high power Light Emitting Diodes (LED) stimulating fibroblast growth (collagen) to reduce fine lines and wrinkles.

• Dermal heating with real time control of optimal skin temperature at 40-41 degrees Centigrade, to improve skin texture.

Energy Profile

Heat Light Combination

Specification

Parameter Value

Rated voltage (Adaptor): 100V - 240V50Hz – 60Hz400mA

Light source : Light Emitting Diodes

Wavelengths : Peak emission wavelength: 645nm

Intensity power : 250mW ±35%

Skin temperature control 40-41oC

Battery Lithium ion, 2 x 3.7V, 750±50mAh

Safety Test IEC 60601 - 2 – 57

Max. charging time 6 hours

Benefits of Silk’n FaceFX

The outcome of using Silk’n FaceFX when following instructions correctly will be – Reduction of facial fine lines– Reduction of pore size– Improved skin tone and texture– Improving the appearance of the face

Best results can be expected 4-6 weeks after completing the initial course of treatment (2-3 times a week, 25 min. per treatment)

Treatment Areas

Typical areas for Silk’n FaceFX treatment are the cheeks, forehead, neck, and around the eyes.

Treatment Features

• Positive experience – pleasant procedure with high end elegant handpiece

• Clean treatment without any additional accessories required (e.g. creams or goggles)

• Nice skin sensation during and after the treatment (e.g. tightening, warming, softening)

• Visible positive skin reaction immediately after treatment

• Ease of treatment - can be performed while watching TV

For men and women

Treatment Schedule

• Perform the treatment for 5-7 minutes on each area. Total treatment time is about 25 min.

• During the first 6 weeks treat 3 times a week

• Treat once a week to maintain

the results

Uniform and Deep Heating

Clinical Test Results

• A 20 patient clinical test was conducted in Toronto, Canada by Dr. Steve Mulholland.

• The patients received instructions to use the device 3 times a week for a period of 8 weeks, and once a week for an additional 4 week period.

• No adverse effects were sighted.• The following are the clinical results

immediately after treatment and 3 months after treatment:

Treatment Effect Under Eyes

TreatedUntreated

Immediately After Treatment

Thermal Imaging

User 2User 1

Each user treated half their face. Photos taken during treatment.

Half Face Treatment

Patient observations in treated area:

• Slight pinkness

• Improved skin texture

• Reduction of periorbital lines

• Lift in cheek bone area

• Feeling of tightness and warmth

Treated Untreated

Immediately After

Treatment result analysis

Mirrored untreated side Mirrored treated side

Immediately After

Half Face Treatment

Treated Untreated

Two Hours After

Patient observations in treated area:

• Skin pinkness reduced

• Glowing skin appearance

• Smoother skin

• Lift in cheek bone area

• Feeling of tightness and warmth lingered

Treatment result analysis

Mirrored untreated side Mirrored treated side

Two Hours After

3 Months Follow-up

Before After

3 Months Follow-up

Before After

3 Months Follow-up

Before

After

3 Months Follow-up

Before After

Package