Post on 26-Jul-2020
transcript
Sliding Series105-125mm
All rights reserved.No part of this publication maybe reproduced, stored in a retrieval system or transmitted in any form or by any
means electronic, mechanical, photocopying, recording or otherwise, without prior permission of Gulf Extrusions.
04-2013-V.01
Sliding Series 105 - 125mm
105 - A GULF EXTRUSIONS
105 - D TESTING
105 - C INTRODUCTION TO THE SYSTEM
105/125-E PROFILES
105 - F PROFILE LIST
105 - G ACCESSORIES
105/125-H ASSEMBLY DRAWINGS
105 - I 3D SECTIONS
105 - B QUALITY AND CERTIFICATIONS
03
11
10
13 - 47
49 - 63
65 - 68
69 - 103
105 - 109
04 - 09
33
Gulf Extrusions Co. LLC, the flagship company of the Al Ghurair Group of Companies, was founded in 1978, Dubai, UAE where it has over the years earned the reputation known as one of the most innovative and reliable companies in the Middle East.
Located close to its raw material supplier Dubai Aluminium Company Ltd (DUBAL), the world’s largest single smelter site, Gulf Extrusions has become one of the largest extrusion plants in the region.
Gulf Extrusions quality products can be seen in many of today’s progressive structures. The company was formed with the sole purpose to meet the increasing demands for aluminium extrusions in domestic, regional and international markets.
Gulf Extrusions six presses and highly skilled workforce are able to produce 65,000 metric tonnes per annum with a rated capacity of 24,000 tonnes for powder coated finish, 6,000 tonnes for anodized finish and can offer more than 10,000 profile designs. These extrusions cover numerous industries ranging from architectural to transportation, engineering to structural sections, components for household items, HVAC and customized products.
During the progressive stages of Gulf Extrusions, from its inception to expansion, the company not only has acquired a majority share in the local market, it has also made its presence felt globally throughout the GCC countries, Indian sub -continent, South East Asia, Australia, Africa, Europe and Canada.
Our commitment and utmost priority is to provide customers with the finest quality of aluminium extrusions.
Gulf Extrusions looks ahead to inevitable challenges and product advancements of the new era.
GULFEXTRUSIONS
GULF EXTRUSIONS 105-A
44
QUALITY STANDARD & CERTIFICATIONS105-B
Quality is an inseparable element of all activities carried out at Gulf Extrusions. Gulf Extrusions is dedicated to respond and deliver on time, high quality, tailor-made and cost effective products. The management and staff are committed to implement a comprehensive and integrated Quality Management System in accordance with the International Quality Standards of ISO 9001 and ISO 14001.
Anodizing Finish:
• BS EN 12373-1 2001 Clause 7 (BS:6161 Part 6)• BS:3987 Clause 2, 3, 5, 6• Appendix- A, B, C, D, E, F, G, H, J, K, L Minimum Film Thickness- 16 Microns
Powder Coated Finish:
• BS:6496 Clause: 10.4, 10.5, 10.6, 10.7 & 10.8• ISO 2360 / 2813 / 2409 / 2931• Minimum Film Thickness – 60 Microns
Extrusions Dimensions Tolerances:
• BS EN 755 - 9:2008 • BS EN 12020 - 2:2008• DIN 1748, DIN 17615• ASTM B221
INTERNATIONAL STANDARD COMPLIANCE
PRODUCT QUALITY CERTIFICATES
Qualicoat (European Powder Coaters Association):• A quality label for coating on metal for Architectural Applications• A product license under the control of EWAA (European Wrought Aluminium Association) in Zurich Switzerland
Qualanod (European Anodizers Association):• A quality label organization to guarantee high quality Aluminium Anodizing.• A product license under the control of EWAA (European Wrought Aluminum Association) in Zurich Switzerland
• SASO
• ESMA
Management:• ISO 9001 (Quality Management System)
• ISO/TS 16949:2009 (Management System)
Environment:• ISO 14001 (Environment Management System)
Membership in International Organization:• AAC member (Aluminium Anodizers Council - USA)• AEC member (Aluminum Extruders Council - USA)• DIN EN 15088
55
QUALITY STANDARD & CERTIFICATIONS
ALLOY 6005A
Element Minimum Maximum
Si 0.50 0.90
Fe - 0.35
Cu - 0.30
Mn - 0.50
Mg 0.40 0.70
Cr - 0.30
Zn - 0.20
Ti - 0.10
Other Each - 0.05
Other Total - 0.15
Aluminium Remainder
ALLOY 6063
Element Minimum Maximum
Si 0.20 0.60
Fe - 0.35
Cu - 0.10
Mn - 0.10
Mg 0.45 0.90
Cr - 0.10
Zn - 0.10
Ti - 0.10
Other Each - 0.05
Other Total - 0.15
Aluminium Remainder
ALLOY 6061
Element Minimum Maximum
Si 0.40 0.80
Fe - 0.70
Cu 0.15 0.40
Mn - 0.15
Mg 0.8 1.20
Cr 0.04 0.35
Zn - 0.25
Ti - 0.15
Other Each - 0.05
Other Total - 0.15
Aluminium Remainder
ALLOY 6060
Element Minimum Maximum
Si 0.30 0.60
Fe 0.10 0.30
Cu - 0.10
Mn - 0.10
Mg 0.35 0.60
Cr - 0.05
Zn - 0.15
Ti - 0.10
Other Each - 0.05
Other Total - 0.15
Aluminium Remainder
ALLOY 6082
Element Minimum Maximum
Si 0.70 1.30
Fe - 0.50
Cu - 0.10
Mn 0.40 1.00
Mg 0.60 1.20
Cr 0.04 0.15
Zn - 0.20
Ti - 0.10
Other Each - 0.05
Other Total - 0.15
Aluminium Remainder
CHEMICAL COMPOSTIONS
105-B
66
ANODIZING
A wide range of anodizing treatment options are possible for the aluminium profile sections of this system. The color choices from Gulf Extrusions range from Natural, Gold, and Bronze to Spectro colors (Red, Blue, Green, and Gray).
This surface treatment process involves first pre-treatment with scotch brite brushing for the unfinished profiles, and then subsequently fully immersing the aluminium profiles in an acidic electrolyte solution through which electric current is passed creating an anodic film on the profiles ranging from 5-30MICs.
The process is guaranteed and certified for use by QUALANOD - A quality label Organization to guarantee high quality aluminium anodizing and the company’s ISO 9001 certification.
QUALITY STANDARD & CERTIFICATIONS105-B
77
Authorization to use the quality sign
QUALITY STANDARD & CERTIFICATIONS 105-B
88
POWDER COATING
• Horizontal & Vertical Powder coating lines with an Annual Capacity of 24 000 MT Powder Coating BS: 6496 Clause: 10.4, 10.5, 10.6, 10.7, & 10.8 ISO 2360/2813/2409/2931 Minimum Film Thickness - 60 Microns
A wide choice of colors for powder coating can be used for the aluminium profile sections.
From Gulf Extrusions the following powder types are available
• Polyester Façade (PE-F)• Super Durable Façade (SDF) & Hyper Durable Façade (HDF) (Where SDF & HDF are equivalent to Poly-Vinyldine DiFluoride (PVDF) in terms of corrosion performance)• Anti Bacterial (recommended to be used in Hospitals)• Anti Static (recommended for laboratories, electronics assembly buildings) and Heat Resistant in nature.
This surface treatment process involves the following pre-treatment
1. Degreasing2. Washing3. Etching4. Washing5. Chromatising6. Double washing in dematerialized water
Once completed, powder is applied using an electrostatic spraying process with charged powder particles, followed by curing in an oven under a controlled temperature of 180-200C for paint polymerization where the paint layer is at least 60mic.
This whole process is certified for use from QUALICOAT - A quality label for coating on metal for Architectural Applications.
GUARANTEE PERIOD:10 years for PE-F Quality25 years for PE-SDF
QUALITY STANDARD & CERTIFICATIONS105-B
99
Authorization to use the quality sign
QUALITY STANDARD & CERTIFICATIONS 105-B
1010
INTRODUCTION TO THE SYSTEM
105 mm GulfEx Series is a design concept to combine esthetics and performance. Full solution package is supported to fulfill the requirements to cover the needed applications. According to the American National Standard It is designed for heavy duty use. The results have been impressive.All profiles are available in all colors in order to meet today’s modern architectural requirements. For better performance of the system, alignment cleats for the frame and shutter are used.Specially designed EPDM Gaskets are made available with the system to enhance the performance and create easy assembly. Other accessories such as rollers and handles come as part of the system.
Sections: The sections in Gulf Extrusions line are produced by extruding aluminum on a wide range of presses starting with 800 tons to 4400 tons press. They are made of aluminum alloy 6060, 6063, 6082 and 6005 according to British Standard Specification for extrusion Dimension Tolerances BS EN 755-9:2008 and BS EN 12020-2:2008.
Frame: Tubular with a width of 105mm, a wide range of frames are available to suit most of the required applications in the building codes. A 125mm frame is available to widen the use of the system. Fly screen rail is embedded in the frames. It is made for internal and external fly screen depending on the project requirements.
Sash: Tubular straight, elegant and stylish. A wide range is available to cover all the needed applications and glass thickness.
Assembly:Assembly of the frames is done by 45º cut whereas the sashes are custom 90º cut.
INTRODUCTION TO THE SYSTEM105-C
1111
TESTING (SLIDING WINDOW 105-125) 105-D
1313
PROFILES
PROFILES 105/125-E
PROFILES
14
All dimensions in mmVisible area_ _ _ _ _
105-E
Fly Screen InsideFrame Profiles - 105mm
PROFILES
15
All dimensions in mm _ _ _ _ _Visible area
105-E
Fly Screen OutsideFrame Profiles - 105mm
PROFILES
16
All dimensions in mmVisible area_ _ _ _ _
105-E
Fly Screen In & OutsideFrame Profiles - 105mm
PROFILES
17
All dimensions in mm _ _ _ _ _Visible area
105-E
Fly Screen In & OutsideFrame Profiles - 105mm
PROFILES
18
All dimensions in mmVisible area_ _ _ _ _
105-E
Fly Screen InsideFrame Profiles - 105mm
1919
Fly Screen InsideFrame Profiles - 105mm
All dimensions in mm _ _ _ _ _Visible area
PROFILES
19
125-E
2020
Fly Screen OutsideFrame Profiles - 125mm
All dimensions in mm _ _ _ _ _Visible area
PROFILES125-E
2121
Fly Screen In & OutsideFrame Profiles - 125mm
All dimensions in mm _ _ _ _ _Visible area
PROFILES
21
125-E
PROFILES
22
All dimensions in mmVisible area_ _ _ _ _
105-E
Used With Umbrellas Frame ProfileSash / Interlock Profiles - 105mm / 125mm
PROFILES
23
All dimensions in mm _ _ _ _ _Visible area
105-E
Used With Umbrellas Frame ProfileSash Profiles - 105mm / 125mm
PROFILES
24
All dimensions in mmVisible area_ _ _ _ _
105-E
Used With Umbrellas Frame ProfileSash / Interlock Profiles - 105mm / 125mm
PROFILES
25
All dimensions in mm _ _ _ _ _Visible area
105-E
Complementary Profiles - 105mm / 125mm
PROFILES
26
All dimensions in mmVisible area_ _ _ _ _
105-E
Fly Screen InsideFrame Profiles - 105mm
PROFILES
27
All dimensions in mm _ _ _ _ _Visible area
105-E
Fly Screen InsideFrame Profiles - 105mm
PROFILES
28
All dimensions in mmVisible area_ _ _ _ _
105-E
Used With Umbrellas Frame ProfileSash / Interlock Profiles - 105mm / 125mm
PROFILES
29
All dimensions in mm _ _ _ _ _Visible area
105-E
Adaptor Profiles - 105mm
PROFILES
30
All dimensions in mmVisible area_ _ _ _ _
105-E
Adaptor Profiles - 105mm
PROFILES
31
All dimensions in mm _ _ _ _ _Visible area
105-E
Adaptor Profiles - 105mm
3232
Adaptor Profiles - 125mm
All dimensions in mm _ _ _ _ _Visible area
PROFILES125-E
PROFILES
33
All dimensions in mm _ _ _ _ _Visible area
105-E
Glazing Beads Profiles
PROFILES
34
All dimensions in mmVisible area_ _ _ _ _
105-E
Fly Screen OutsideFrame Profiles - 105mm
PROFILES
35
All dimensions in mm _ _ _ _ _Visible area
105-E
Fly Screen OutsideFrame Profiles - 105mm
PROFILES
36
All dimensions in mmVisible area_ _ _ _ _
105-E
Frame Profiles - 105mmFly Screen Inside
PROFILES
37
All dimensions in mm _ _ _ _ _Visible area
105-E
Frame Profiles - 105mmFly Screen Outside
PROFILES
38
All dimensions in mmVisible area_ _ _ _ _
105-E
Frame Profiles - 105mmFly Screen Inside
PROFILES
39
All dimensions in mm _ _ _ _ _Visible area
105-E
Frame Profiles - 105mmFly Screen Outside
PROFILES
40
All dimensions in mmVisible area_ _ _ _ _
105-E
Frame Profiles - 105mmFly Screen Outside
PROFILES
41
All dimensions in mm _ _ _ _ _Visible area
105-E
Frame Profiles - 105mmFly Screen Outside
PROFILES
42
All dimensions in mmVisible area_ _ _ _ _
105-E
Frame Profiles - 105mmFly Screen Inside
PROFILES
43
All dimensions in mm _ _ _ _ _Visible area
105-E
Frame Profiles - 105mmFly Screen Outside
PROFILES
44
All dimensions in mmVisible area_ _ _ _ _
105-E
Frame Profiles - 105mmFly Screen Inside
PROFILES
45
All dimensions in mm _ _ _ _ _Visible area
105-E
Frame Profiles - 105mmFly Screen Outside
PROFILES
46
All dimensions in mmVisible area_ _ _ _ _
105-E
Sash / Interlock Profiles - 105mmUsed With Umbrellas Frame Profile
PROFILES
47
All dimensions in mm _ _ _ _ _Visible area
105-E
Fly screen / Angle
4949
PROFILE LIST
PROFILE LIST
PROFILE LIST 105-F
50
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST105-F
13009
13010
13444
13445
14517
14516
14352
14
14
15
15
26
26
16
1.676
2.203
1.611
2.138
2.188
2.671
2.295
91.687
106.83
80.919
96.653
19.508
21.119
98.22
14.936
17.293
16.30
18.294
119.718
129.791
19.436
16.266
19.321
13.133
16.20
3.892
4.399
16.462
2.957
3.575
3.322
3.874
21.189
23.298
4.203
51
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 105-F
17006
15113
15112
16205
14518
14508
13905
16
18
18
27
27
17
17
2.360
1.817
1.429
2.159
2.489
2.058
1.963
20.225
9.334
6.536
16.914
12.451
93.15
83.061
118.882
83.111
72.236
117.265
113.075
10.178
9.616
4.251
4.393
2.711
3.695
5.422
17.527
14.891
21.041
15.636
13.519
20.991
21.415
4.795
4.421
52
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST105-F
13023
13024
13442
13443
14351
16332
09493
19
19
20
20
21
21
41
1.951
2.628
1.859
2.536
2.710
2.475
1.598
148.68
175.16
127.74
155.67
157.70
13.331
9.479
17.939
21.250
19.088
21.764
23.258
154.492
86.304
22.333
26.772
17.325
21.925
22.194
6.112
2.419
3.435
4.283
3.787
4.516
4.929
24.453
15.778
53
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 105-F
09495
11892
11893
21055
21056
21057
21058
41
34
34
35
35
36
36
1.775
1.083
1.269
1.349
1.575
1.371
1.626
10.095
5.533
5.854
6.700
7.116
6.994
7.494
92.692
59.024
65.603
73.174
81.143
72.972
81.229
2.327
1.590
1.650
1.979
2.049
2.116
2.207
16.583
10.500
11.974
13081
14.875
12.622
14.012
54
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST105-F
21776
21777
10957
10958
10857
10858
09908
37
37
38
38
39
39
40
1.032
1.215
1.589
1.880
1.572
1.824
1.281
5.400
5.7100
7.681
8.259
7.441
7.923
6.077
55.770
61.985
85.001
94.294
85.653
94.533
67.918
1.566
1.616
2.340
2.445
2.211
2.294
1.784
9.873
11.269
14.597
16.162
15.370
17.379
12.171
55
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 105-F
09909
21059
21060
11078
11079
11076
11077
40
42
42
44
44
43
43
1.495
1.622
1.862
1.870
2.122
1.821
2.073
6.376
22.480
23.850
25.257
26.775
25.216
26.705
74.949
93.647
101.643
107.914
116.359
108.621
119.019
1.832
3.953
4.079
4.459
4.604
4.443
4.581
13.675
14.486
15.922
16.558
18.073
17.170
19.441
56
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST105-F
21061
21062
13405
10485
11279
13025
13013
1.578
1.819
1.558
0.852
0.891
0.934
1.328
22.439
23.778
10.119
5.424
5.733
5.333
8.248
93.491
103.301
73.964
10.386
11.827
8.382
37.015
3.936
4.056
6.445
3.455
3.652
3.397
5.250
14.795
16.934
11.757
3.067
3.484
2.619
7.248
45
45
23
24
23
24
23
57
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 105-F
13011
14655
14657
21227
13955
14519
14520
0.979
1.047
1.408
0.932
1.021
1.272
1.097
7.392
7.654
8.585
5.768
12.189
9.718
10.968
11.109
13.612
43.383
13.068
6.044
16.260
6.630
4.224
4.374
5.468
3.673
3.454
5.552
3.457
3.350
4.388
8.068
3.574
3.849
4.575
3.994
24
22
22
22
23
28
28
58
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST105-F
14434
14433
12537
09910
14464
14466
12740
1.063
0.825
0.737
0.660
0.500
0.650
0.913
17.825
8.922
4.006
4.791
2.792
9.651
12.561
5.331
4.610
7.848
3.102
5.024
3.364
6.558
4.807
3.470
2.670
2.003
1.861
2.793
4.165
3.728
3.023
3.063
2.216
2.042
2.336
3.801
46
46
46
46
46
46
22
59
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 105-F
13012
14656
14465
14435
12538
13843
10493
1.019
1.088
0.633
1.021
0.900
2.098
1.057
9.138
9.426
4.545
7.232
6.238
76.365
51.459
12.572
15.179
6.203
10.629
9.364
13.965
1.608
4.112
4.202
2.212
3.406
2.944
13.808
7.525
3.722
4.791
2.250
3.772
3.323
3.617
0.648
24
22
46
46
46
29
32
60
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST105-F
10993
10487
10994
11395
21112
22075
24186
1.181
0.937
1.044
0.876
1.010
0.921
1.042
68.644
28.432
39.903
23.788
1.955
1.567
2.086
2.528
1.599
2.437
1.839
32.537
34.199
33.340
10.809
4.859
7.343
4.789
0.780
0.639
0.825
0.963
0.649
0.936
0.712
5.730
8.532
5.801
32
29
30
30
30
29
31
61
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 105-F
21762
21662
10969
21111
10492
10486
10491
0.935
0.843
0.332
0.413
0.468
0.282
0.181
1.804
1.518
0.587
1.232
5.398
1.070
0.389
38.359
25.410
0.631
0.721
0.370
0.575
0.125
0.706
0.622
0.546
0.703
2.342
0.730
0.362
9.247
4.300
0.384
0.580
0.359
0.557
0.116
31
31
25
25
25
25
25
62
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST105-F
21110
10657
13441
12745
14521
13711
12724
0.521
0.515
0.455
0.457
0.695
0.455
0.447
2.736
11.213
0.418
0.503
0.689
3.113
3.387
2.807
0.083
3.102
3.191
5.992
0.418
0.685
0.942
2.638
0.625
0.679
0.969
1.352
1.487
0.975
0.180
1.361
1.414
2.306
0.625
0.797
28
25
47
47
47
47
47
63
ProfileReference
Profile Section Page WeightKG/M
IXcm4
IYcm4
WXcm3
WYcm3
PROFILE LIST 105-F
11321
10377
10464
11729
11730
11547
10371
0.251
0.282
0.271
0.242
0.286
0.340
0.298
0.241
0.742
0.812
0.631
0.795
0.9412
0.746
0.696
0.385
0.254
0.233
0.697
1.480
0.840
0.170
0.488
0.597
0.435
0.481
0.522
0.471
0.497
0.326
0.186
0.166
0.453
0.614
0.495
33
33
33
33
33
33
33
6565
ACCESSORIES
105-GACCESSORIES
66
Gasket / Accessories Reference
Section Description Unit
ACCESSORIES105-G
GE-G-002
GE-G-010
GE-G-011
GE-G-008
Linear Meter
Linear Meter
Linear Meter
Linear Meter
Linear Meter
Linear Meter
Linear Meter
FRONT GLAZING GASKETUSED WITH THE FRAME
& SASH PROFILE
GLAZING BEADGASKET
GLAZING BEADGASKET
FRONT GLAZING GASKETUSED WITH
SASH PROFILE
10MM FIN TYPE BRUSHFLY SCREEN PROFILE
BRUSH6.0MM HIGH
(6.5 - 6.8 WIDE)
8.0MM NORMAL BRUSHAND DUST PROOF
PROFIILE 10657
BRUSH8.0MM HIGH
(6.5 - 6.8 WIDE)
BRUSH3.0MM HIGH
(6.5 - 6.8 WIDE)
3.0MM NORMAL BRUSH FOR SASH AND FOR INTERLOCK PROFILE
67
Gasket / Accessories Reference
Section Description Unit
ACCESSORIES 105-G
SCR-60
SCR-45
SCR-19
SCR-20
Piece
Piece
Piece
Piece
Piece
Piece
Piece
B 4.8 X 60 - DIN 7981 - A2FOR TOP FIXED FRAME
B 4.2 X 45 - DIN 7981 - A2FOR SASH CORNER
ASSEMBLY
B 4.2 X 19 - DIN 7982 - A2FOR LABYRINTH FASTENING
M 5 X 20 - DIN 965 - A2FOR ROLLER FASTENING
PLASTIC END CAP TO COVER MILLED PART AT
THE BOTTOM OF THE INTERLOCK PROFILE 13012
END CAP BEC-13012(BOTTOM END CAP)
PLASTIC END CAP TO COVER MILLED PART AT
THE TOP OF THE INTERLOCK PROFILE 13012
END CAP TEC-13012(TOP END CAP)
DRAINAGE VALVESUC-120
6868
ACCESSORIES105-G
68
SUP-120
FLUSH HANDLE
HOS-503
NED-105
Piece
Piece
Piece
Piece
DEFLECTOR
SUITABLE FLUSH TYPE HANDLE WITH LOCKING
ARRANGEMENT(COUNTERPLATE + NIB)
3MM THICK HOLDING STRIP FOR FASTENING
ROLLER ON SASH PROFILE USING 2 M5X20 SCREWS
NEEDLE BEARING ROLLERHOUSED IN AN ALUMINIUMCHANNEL TO BE USED AT
THE BOTTOM OF THE SASH PROFILE
Gasket / Accessories Reference
Section Description Unit
6969
ASSEMBLY DRAWINGS
ASSEMBLY DRAWINGS 105-H
70
ASSEMBLY DRAWINGS105-H
All dimensions in cross sections are shown in mmProfile are not necessarily shown to scale
71
ASSEMBLY DRAWINGS 105-H
Detail - ABottom Window Section
72
ASSEMBLY DRAWINGS105-H
Top Window SectionDetail - A1
73
ASSEMBLY DRAWINGS 105-H
Left Window SectionDetail - A2
74
ASSEMBLY DRAWINGS105-H
Interlock SectionDetail - A3
75
ASSEMBLY DRAWINGS 105-H
Right Window SectionDetail - A4
76
ASSEMBLY DRAWINGS105-H
Bottom Window SectionDetail - B
77
ASSEMBLY DRAWINGS 105-H
Fixed SectionDetail - B1
78
ASSEMBLY DRAWINGS105-H
Top Fixed SectionDetail - B2
79
ASSEMBLY DRAWINGS 105-H
Left Fixed SectionDetail - B3
80
ASSEMBLY DRAWINGS105-H
Left Fixed SectionDetail - B4
81
ASSEMBLY DRAWINGS 105-H
Left Fixed SectionDetail - B5
82
ASSEMBLY DRAWINGS105-H
4 Vents Mid SectionDetail - B6
8383
Bottom Door SectionDetail - D
ASSEMBLY DRAWINGS 125-H
8484
Top Door SectionDetail - D1
ASSEMBLY DRAWINGS125-H
8585
Left Door SectionDetail - D2
ASSEMBLY DRAWINGS 125-H
8686
Interlock SectionDetail - D3
ASSEMBLY DRAWINGS125-H
8787
Right Door SectionDetail - D4
ASSEMBLY DRAWINGS 125-H
88
ASSEMBLY DRAWINGS105-H
Bottom Door / Window SectionDetail - R
89
ASSEMBLY DRAWINGS 105-H
Top Door / Window SectionDetail - R1
90
ASSEMBLY DRAWINGS105-H
Left Door / Window SectionDetail - R2
91
ASSEMBLY DRAWINGS 105-H
Interlock SectionDetail - R3
92
ASSEMBLY DRAWINGS105-H
Right Door / Window SectionDetail - R4
93
ASSEMBLY DRAWINGS 105-H
Bottom SectionDetail - C
94
ASSEMBLY DRAWINGS105-H
Top SectionDetail - C1
95
ASSEMBLY DRAWINGS 105-H
Left SectionDetail - C2
96
ASSEMBLY DRAWINGS105-H
Interlock SectionDetail - C3
97
ASSEMBLY DRAWINGS 105-H
Left SectionDetail - C4
98
ASSEMBLY DRAWINGS105-H
99
ASSEMBLY DRAWINGS 105-H
100
ASSEMBLY DRAWINGS105-H
101101
ASSEMBLY DRAWINGS 125-H
102
ASSEMBLY DRAWINGS105-H
103
ASSEMBLY DRAWINGS 105-H
105105
3D SECTIONS 105-I
3D SECTIONS
106
3D SECTIONS105-I
Frame and Sash
TO BE USED AT 45O JOINTS FOR THE FRAME PROFILE
UPPER FRAME
01009
TO BE USED AT 45O JOINTS FOR THE FRAME PROFILE
01009
TO BE USED AT 45O JOINTS FOR THE FRAME PROFILE
01009
TO BE USED AT 45O JOINTS FOR THE FRAME PROFILE
01009
SCREWB4.2X19-DIN7982-A2
SCREWB4.2X19-DIN7982-A2
SCREWB4.2X19-DIN7982-A2
SCREWB4.2X19-DIN7982-A2
SCREWB4.2X19-DIN7982-A2
SCREWB4.2X19-DIN7982-A2
SCREWB4.2X19-DIN7982-A2
SCREWB4.2X19-DIN7982-A2
13010LOWER FRAME
DEFLECTOR
DEFLECTOR
DEFLECTOR
13009SIDE FRAME
13009SIDE FRAME
PLUGSSUITABLE DRAIN
PLUGSSUITABLE DRAIN
10657FOR DUST PROOF
13009
107
3D SECTIONS 105-I
Sash Section
COUNTER SUNKFIXING SCREW
INSULATEDGLASS UNIT
UPPER SASH11279
SCREW PLUG
SCREW PLUG
SCREW PLUG
SCREW PLUG
COUNTER SUNKFIXING SCREW
COUNTER SUNKFIXING SCREW
COUNTER SUNKFIXING SCREW
INTERLOCK PROFILE11279
LOWER SASH13013
LATERAL SASH13011
SUITABLE FLUSHTYPE HANDLE
END CAP FOR TRACKGUIDING ANDAESTHETIC PURPOSE
NEEDLE ROLLER HOUSED TOBE USED AT THE BOTTOM OFTHE SASH PROFILE
END CAP FOR TRACKGUIDING AND AESTHETIC PURPOSE
END CAP FOR TRACKGUIDING AND AESTHETIC PURPOSE
END CAP FOR TRACKGUIDING ANDAESTHETIC PURPOSE
108
3D SECTIONS105-I
Sliding Frame
SASH PROFILE13011
SASH PROFILE13011
GASKETGE-G-010
GASKETGE-G-010
INSULATEDGLASS UNIT
GASKETGE-G-010
BRUSH6MM
BRUSH6MM
BRUSH3MM
BRUSH3MM
BRUSH3MM
FLY SCREEN12745
FLY SCREEN12745
BOTTOM FRAME13024
SIDE FRAME13023
INTEGRATEDARCHITRAVE
INTEGRATEDARCHITRAVE
INTERLOCK PROFILE13012
109
3D SECTIONS 105-I
Sliding Door 125mm
All rights reserved.No part of this publication maybe reproduced, stored in a retrieval system or transmitted in any form or by any
means electronic, mechanical, photocopying, recording or otherwise, without prior permission of Gulf Extrusions.
P.O.Box-5598, Dubai, United Arab Emirates • Tel: +971 4 884 6146 • Fax: +971 4 884 6830 Email: mail@gulfex.com • Visit us at www.gulfex.com