Post on 27-Jan-2021
transcript
SMD SHIELDED POWER INDUCTOR
| | | | | | | | | | | | | | |
ALPI-6611
STANDARD SPECIFICATIONS:
APPLICATIONS:FEATURES:
ABRACON IS ISO 9001 / QS 9000
CERTIFIED
ABRACON IS ISO 9001 / QS 9000
CERTIFIED30332 Esperanza, Rancho Santa Margarita, California 92688tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 08.04.09Visit www.abracon.com for Terms & Conditions of Sale
PARAMETERSABRACON P/N: ALPI-6611 SeriesOperating temperature: -40°C to + 85°CStorage temperature: -40°C to + 85°C, 70% RH max.
OPTIONS AND PART IDENTIFICATION: (Left blank if standard)
Note
3. Test Freq.：100kHz、0.1V
1. IDC 1 : Base on Inductance change(∣∆L/L0∣≦10%), ∆L=L(IDC)-L0
2. IDC 2 : Base on Temperature change (T
SMD SHIELDED POWER INDUCTOR
| | | | | | | | | | | | | | |
ALPI-6611 Pb RoHSCompliant
ABRACON IS ISO 9001 / QS 9000
CERTIFIED
ABRACON IS ISO 9001 / QS 9000
CERTIFIED30332 Esperanza, Rancho Santa Margarita, California 92688tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 08.04.09Visit www.abracon.com for Terms & Conditions of Sale
OUTLINE DRAWING:
TAPE & REEL: Tape and reel 2,500pcs/reel
Dimensions: mm
A C Z330±2.0 16.5 100±1.0
seriesALPI-6611
ZA
C
W E F P A0 B0 D0 P0 K0 t16.0±0.3 1.75±0.1 9.25±0.1 8.0±0.1 6.0±0.1 7.0±0.1 1.5±0.1 4.0±0.1 1.5±0.1 0.35±0.05
Dimensions: mm
8.3
1.1 4.7
B
A
C
Marking
D
E F
A：B：C：D：
Max.Max.
m/mm/m
6.605.60
Max±0.33.40
1.10 m/mm/m
.
E： 0.75 m/mF： 4.90 m/m
CHARACTERISTIC CURVE:
D0 P0
B0
A0P
F
W
E
K0
t3°m
ax
Empty part Product included
20 Pitch min.
100 01
0
100
100
Empty part Leader
End tape
20 Pitch min.User direction of feed
±0.3±0.3
6.6 x 5.6 x 1.1mm
SMD SHIELDED POWER INDUCTOR
| | | | | | | | | | | | | | |
ALPI-6611 Pb RoHSCompliant
ABRACON IS ISO 9001 / QS 9000
CERTIFIED
ABRACON IS ISO 9001 / QS 9000
CERTIFIED30332 Esperanza, Rancho Santa Margarita, California 92688tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 08.04.09Visit www.abracon.com for Terms & Conditions of Sale
The reflow condition recommended above is according to the machine used by our company. Big differences will arise as a result of the type of machine, reflow conditions, method, etc used. Hence, before setting up your reflow conditions. Please confirm with the above. Moreover, please clear all questions.
REFLOW PROFILE:
The condition of reflow (Recommendation)
130 sec 50
100
150
20 40 60 80 100
200
250
Temperature (°C)
300
220140120 160 180 200
40 sec
10 sec
Time (sec)
240 260
10 sec
Surface temparature of coil
235 °C
250 °C
NOTE: Abracon manufactured products are intended for general commercial and industrial use. For applications requiring high reliability and/or presenting extreme operating environment, written consent & authorization from Abracon is required.
6.6 x 5.6 x 1.1mm