www.cad.gidinceanu.com 1

Lesson 1 Basic

www.cad.gidinceanu.com 2

www.cad.gidinceanu.com 3

www.cad.gidinceanu.com 4

www.cad.gidinceanu.com 5

www.cad.gidinceanu.com 6

www.cad.gidinceanu.com 7

www.cad.gidinceanu.com 8

www.cad.gidinceanu.com 9

www.cad.gidinceanu.com 10

www.cad.gidinceanu.com 11

www.cad.gidinceanu.com 12

Click here to exit the Sketch

www.cad.gidinceanu.com 13

If you clicked on main window and the sketch is no longer active, first click on the Sketch1 and after that click on the Extruded Boss/Base feature.

www.cad.gidinceanu.com 14

www.cad.gidinceanu.com 15

This conclude out first lesson!