Post on 22-Mar-2016
description
transcript
Highland Holds Customer
Appreciation Day…8
ACT Moves Into
Charlotte Market…16
RW Moore, Benchmark Host
Skeet Shooting Event…12
Inside
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
® SoutheastEdition
$3.00
Published Nationally
October 3, 2012 • Vol. XXV • No.20 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910 • www.constructionequipmentguide.com
By Cindy RileyCEG CORRESPONDENT
Construction on a 431,000-sq.-ft. (40,041sq m) prison that can house more than 1,400inmates is close to completion in Pikeville,Tenn. The new Bledsoe County CorrectionalComplex on Horsehead Road, which accord-ing to the Tennessee Department ofCorrections (TDOC) will create hundreds ofnew jobs, includes rows of large gray hous-ing units made from stacked, precast cellsbuilt on the prison grounds. The project was first announced by the
TDOC back in 2004, based on populationprojections which indicated the need foradditional beds; however, work didn't actual-ly begin until May 2010. A groundbreakingfor the new facility was held in April 2010. The Bledsoe County addition consists of
five buildings containing 632 cells producedin a total of 156 quad-cell modules and fourdouble-cell modules. It is actually an expan-sion of the Southeastern Tennessee StateRegional Correctional Facility, which wasbuilt in 1980 and is a time-building institu-
Bledsoe County Builds Correctional Complex
The number of improving housing marketsacross the country rose to 99 in September,according to the National Association of HomeBuilders/First American Improving MarketsIndex (IMI), released Sept. 10. This is up from80 metros that were listed as improving inAugust and includes representatives from 33
states as well as the District of Columbia. The index identifies metropolitan areas that
have shown improvement from their respectivetroughs in housing permits, employment andhouse prices for at least six consecutive months.Markets added to the list in September includesuch geographically diverse locations as
Tucson, Ariz.; Jacksonville, Fla.; Springfield,Ill.; Greenville, N.C.; and Bend, Ore.“The number of improving housing markets
grew by 19 in September as 68 metros retainedtheir spots, 31 new metros were added and just12 dropped off the list,” noted Barry Rutenberg,
Improving Housing Markets List Grows to 99
see HOUSING page 80
Canada Firm Proposes New Pipeline RouteJosh FunkASSOCIATED PRESS
OMAHA, Nebraska (AP) Thecompany that wants to build apipeline to transport crude oil
from Canada to U.S. Gulf Coastrefineries said Sept. 5 it hasrevised its proposed new routethrough Nebraska to avoid envi-ronmentally sensitive areas. The latest proposed Keystone
XL pipeline route isTransCanada’s second attempt tosatisfy state environmental regu-lators. The Nebraska Departmentof Environmental Quality said inJuly that the initial revised route
crossed land that could erode eas-ily and passed near unconfinedaquifers that supply drinkingwater to residents and livestock. The new TransCanada propos-
see PIPELINE page 78
see COMPLEX page 34
Photo courtesy of Jason Gentry of Mid-State Construction Crews install the 16-in. (40.5 cm) diameter HDPE distribution piping underneath the road-way.
Table of Contents................4
Mini & Compact EquipmentSection..........................43-61
Paving Section ............63-75
Parts Section................76-77
Auction Section ..........82-93
Business Calendar ............89
Advertisers Index..............94
Page 2 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Contact your sales representative to seehow we can make a difference for you.
Main Office:1023 S. 50th Street • Tampa, FL
866-586-8956
Fort LauderdaleDavie)
954-327-8808
Fort Myers293-334-6063
Orlando407-859-9160
Jacksonville904-268-4400
Savannah, GA912-966-5666
The Takeuchi product line is only available in the Tampa and Orlando locations.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 3
Volvo Construction Equipment
USED EQUIPMENT
Compactors - Padfoot2006 INGERSOLL RAND SD122F......$97,000
Compactors - Smooth Drum2008 VOLVO DD138HF, 1428 Hrs....$128,0002008 VOLVO DD90HF, 730 Hrs ......$120,000
Excavators - Crawler2006 VOLVO EC140B LC, 2422 Hrs ..$84,0002005 VOLVO EC160B LC, 2705 Hrs $102,0002008 VOLVO EC160CL, 1607 Hrs ....$138,0002007 VOLVO EC240CL, 2192 Hrs ....$150,0002007 VOLVO EC330B LC, 4522 Hrs $160,0002008 VOLVO EC330CL, 4653 Hrs ....$186,0002008 VOLVO EC460CL, 5244 Hrs ....$240,000
Excavators - Mini (up to 12,000 lbs)2008 VOLVO EC55B, 1682 Hrs ........$56,400
Excavators - Wheel2010 VOLVO EW180C, 2034 Hrs ....$180,000(2) 2011 VOLVO EW180C, 1262-1892 Hrs ..........................................$204,000 Ea.
Motor Graders2008 VOLVO G940, 1945 Hrs ........$175,0002009 VOLVO G930, 1030 Hrs ........$210,000
Off-Highway Trucks2005 VOLVO A25D, 4977 Hrs ........$190,0002006 VOLVO A25D, 6682 Hrs ........$185,000(3) 2011 VOLVO A25F, 1130-1243 Hrs ..............................................$348,000 Ea.
2008 VOLVO A30E, 3771 Hrs ........$312,000(2) 2011 VOLVO A30E, 1702-2013 Hrs ......................................$384,000-$396,000
(7) 2011 VOLVO A30F, 1387-1906 Hrs ......................................$402,000-$414,000
(3) 2011 VOLVO A35F, 1641-1795 Hrs ..............................................$492,000 Ea.
2007 VOLVO A40D, 6625 Hrs ........$288,000(5) 2008 VOLVO A40E, 4816-6521 Hrs ......................................$315,000-$360,000
(2) 2010 VOLVO A40E, 2154-2732 Hrs ......................................$460,000-$510,000
(11) 2011 VOLVO A40E, 1922-2519 Hrs ....................................$492,000-$510,000
2007 VOLVO A40E FS, 5019 Hrs ....$414,000(10) 2011 VOLVO A40F, 1163-2817 Hrs......................................$540,000-$588,000
(4) 2007 VOLVO T450D, 1366-2044 Hrs ............................................$300,000 Ea.
Skid Steers2006 VOLVO MC110B, 313 Hrs........$34,000
Water Equipment - Truck2006 VOLVO A30D, 5573 Hrs ........$190,000
Wheel Loaders(2) 2011 VOLVO L20F, 7-111 Hrs $58,800 Ea.(2) 2011 VOLVO L60F, 889-1258 Hrs ................................................$150,000 Ea.
2005 VOLVO L70E, 2623 Hrs ........$107,5002006 VOLVO L70E, 4225 Hrs ........$108,0002009 VOLVO L70F, 6474 Hrs ........$126,0002011 VOLVO L70F, 886 Hrs ..........$168,0002008 VOLVO L150F, 3173 Hrs........$252,000(2) 2009 VOLVO L150F, 3121-4068 Hrs......................................$260,000-$264,000
2011 VOLVO L150G, 1632 Hrs ......$342,0002011 VOLVO L35ZD, 407 Hrs ..........$78,000
North Carolina: CharlotteRaleigh
AshevilleGreenville
South Carolina: Columbia
North CharlestonPiedmont
Georgia: Buford
Forest ParkSavannah
Tennessee: Knoxville
Chattanooga
Your VOLVO dealer inThe Carolinas • Georgia • East Tennessee
www.ascvolvo.comVOLVO EC330BLC, 4522 Hrs, $160,000
(7) 2011 Volvo A30F 1259 - 1627 hrs,$402,000 - $414,000
2011 Volvo L35ZD, 292 hrs, $78,000
(4) 2007 Volvo T450D from 1354 hrs,$300,000
(3) 2010/11 Volvo EW180C, 1052-1930hrs, $180,000 – 204,000
(2) 2011 Volvo L60F, 630-997 hrs,$150,000
2011 Volvo L150G 1614 hrs, $342,000
(3) 2011 Volvo A35F, 1442 - 1695 hrs,$492,000
2008 – 2011 (15) Volvo A40E from 1810hrs, from $315,000
2007 Volvo A25D, 5400 hrs, New 5000gallon tank $230,000
(5) 2008 – 2010 Volvo L150F from 2336hrs, from $222,000
2010 VOLVO L90F, 3700 Hrs, NewRubber $150,000
Doug Wilson 704-562-2032 Email: doug.wilson@ascvolvo.com
Billy Brice 678-318-9500Email: billy.brice@ascvolvo.com
Elon Holley 334-450-7667Email: elon.holley@ascvolvo.com
ASC has the largest supply of Tier 3 Articulated Trucks in inventory, call for more details.
Page 4 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
SOUTHEAST EDITIONCirculated Throughout • Alabama • Arkansas • Florida • Georgia • Louisiana
• Mississippi • North Carolina • South Carolina • Tennessee • Virginia • Puerto Rico • Virgin Islands
Founder, Publisher & CEO Edwin M. McKeon Sr.Southeast Publisher Richard C. McKeon
Editor In Chief Craig Mongeau Associate Editor Christine Reckner
Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton
Controller Tom WeinmannCirculation Mgr. Rolf Krog
Asst. Circulation Mgr. Cathy Printz
Main office 470 Maryland Drive Fort Washington, PA 19034
215/885-2900Toll Free 800/523-2200
Fax 215/885-2910
Web site www.constructionequipmentguide.comEditorial e-mail editorial@cegltd.com
Advertising e-mail production@cegltd.com
For advertising rates Contact Richard C. McKeon• North & South Carolina • Tennessee •Virginia
704/553-8888Toll Free 800/288-4234
Fax 704/553-8899e-mail rmckeon@cegltd.com
Contact Rich Olivier• Alabama • Arkansas • Georgia •Mississippi • Tennessee • Florida Panhandle
770/443-3174Toll Free 800/409-1479
Fax 770/443-3176e-mail rolivier@cegltd.com
Contact Jim Van Natta• Florida • Virgin Islands • Puerto Rico
407/365-5720Toll Free 800/344-3026
Fax 407/366-3192e-mail jvannatta@cegltd.com
Contact Dale Agnew•Louisiana
Toll Free 877/877-4997 Fax 972/719-2611
e-mail dagnew@cegltd.com
Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send addresschanges to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Contents Copyrighted ©2012, by Construction Equipment Guide, which is a Registered Trademark, registered in theU.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photo-graphs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyrightpurposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially.Contributor articles do not necessarily reflect the policy or opinions of this publication.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is notresponsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used inadvertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occa-sionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any adver-tising.
IN THIS ISSUESPECIAL SECTION…MINI & COMPACT EQUIPMENTBe sure to check out this special section! Keep up to date with the latest information on mini and compact equipment.
FEATURES…HIGHLAND TRACTOR CO. HOSTS CUSTOMERAPPRECIATION DAYHighland Tractor had GradeWorks LLC, a construction GPS and site worksurveying company, come in and lay out a road, building pad and pond at the back of the property.
RW MOORE, BENCHMARK HOST ANNUAL SKEETSHOOT EVENTThe well-attended Sept. 14. event drew 200 contractors from easternNorth Carolina.
ATLANTIC COAST TOYOTALIFT MOVES INTOCHARLOTTE MARKETWith six employees in the new Charlotte store, ACT’s staff handles everything from sales to aftermarket support.
WRIGHT EXPRESS RELEASES MONTHLYCONSTRUCTION FCI RESULTSThe Wright Express Construction Fuel Consumption Index indicated anincrease of 1.4 percent in July versus its level the previous year.
SANY BUILDS WORLD’S LARGEST, MOST ADVANCEDEXCAVATOR FACTORY IN CHINAThe Lingang Industrial Park has 10.7 million sq. ft. of total space, with 5.9 million sq. ft. of manufacturing space.
U.S. CONSTRUCTION SPENDING FELL 0.9 PERCENT IN JULYSpending on construction of single-family homes and apartments increasedagain, a hopeful sign for the modest housing recovery.
‘LADY CRANE, ’ COLLEAGUES CLOSE ONE DOOR,OPEN ANOTHERThe National Wind Technician Organization is able to provide safety training services for all personnel involved in the process of building, maintaining, operating, and managing wind turbines and wind sites.
20
28
28
32
16
12
8
43
80 CLASSIFIEDS82 COMING AUCTIONS89 BUSINESS CALENDAR
EQUIPMENT…76 DOOSAN DX140W Wheeled Excavator77 DOOSAN PORTABLE POWER Mobile Generators
12
43
16
8
28
®
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 5
QUALITY USED EQUIPMENT AT COMPETITIVE PRICES!Call Jill Penderghest, Asst. Used Equipment Manager O: 904.494.1436 | C: 904.803.2909
Browse our complete used inventory at used.ringpower.com
$69,500, LGP Blade.................................CanopySN# YYY00173 — 2000 Hrs., 2008 D5KLGP:
, LGP Blade..................................CanopySN# RKG03563 — 2,500 Hrs.,2007 D5GLGP:
$69,500SN# YYY00173 — 2000 Hrs.,
CAB, A/C, GP Bkt................................SN# CXK00608 — 3,500 Hrs.,2010 928HZ:
$62,000, LGP Blade..................................SN# RKG03563 — 2,500 Hrs.,
, GP Bkt...................................Canopy2007 247B2:
$120,000 CAB, A/C, GP Bkt................................SN# CXK00608 — 3,500 Hrs.,
,XL Blade, Hours are correct....Canopy2005 D3GXL:
$23,500, GP Bkt...................................SN# MTL05114 — 1,850 Hrs.,
$40,000,XL Blade, Hours are correct....SN# JMH01586 — 600 Hrs.,2005 D3GXL:
$60,000racks..A/C, 30” GP Bkt, Thumb, Rubber TSN# BCM02099 – 2,300 Hrs.,2008 307C:
, LGP Blade.................................CanopySN# LLL00480 — 2,000 Hrs.,2008 D3KLGP:
$60,000CABSN# BCM02099 – 2,300 Hrs.,
, A/C..........................., 200HP P, A/C...........................FreightlinerSN# 4DM42354 – 34,000 Mi.,2004 Dump Truck:
$53,000, LGP Blade.................................SN# LLL00480 — 2,000 Hrs.,
OROPS, 48” Forks...................................2007 1044C-54:
$40,000, A/C...........................SN# 4DM42354 – 34,000 Mi.,
, Std Stk, Rubber TCanopy2007 305CCR:
$75,000OROPS, 48” Forks...................................SN# 104433223 – 2,000 Hrs.,2007 1044C-54:
$37,000racks............., Std Stk, Rubber TSN# HWJ01921 — 800 Hrs.,2007 305CCR:
$52,500Boom Lift, Diesel.....................................SN# S60-17998 – 2,500 Hrs.,2008 GENIE S60:
Canopy ,LGP Blade................................SN# LLL00614 — 1,200 Hrs.,2010 D3KLGP:
$52,500SN# S60-17998 – 2,500 Hrs.,
Bkt......................GP A/C, 2-Speed, CAB, SN# JA2010 246C CL2:
$62,000Canopy ,LGP Blade................................SN# LLL00614 — 1,200 Hrs.,
, GP Bkt., LFCanopy2009 289C L2:
$29,000Bkt......................Y04428 – 1,100 Hrs.,SN# JA
Boom Lift, Diesel..................................2010 GENIE S125:
$39,500, 2-Spd...................... LF F, 2-Spd......................SN# JMP00650 — 1,850 Hrs.,
$157,500Boom Lift, Diesel..................................SN# S125-2862 – 1,100 Hrs.,2010 GENIE S125:
B
$25,000Cab, A/C, GP Bkt.....................................SN# BXM02941 – 1,300 Hrs.,2006 242B CL1:
l
ires.......................Smooth Drum, 6PR TSN# DAR00426 — 276 Hrs.,2007 CS323C:
$25,000SN# BXM02941 – 1,300 Hrs.,
d i
railer Mounted............................, TowerLight T2011 GENIE TML4000:
$55,000ires.......................SN# DAR00426 — 276 Hrs.,
OROPS, 48” Forks...................................2008 TL1055:
$6,000railer Mounted............................SN# TML11202 - 850 Hrs.,
d i
on Boom, Rear Mount....................20-TTon Boom, Rear Mount....................2007 National 690:
$77,500OROPS, 48” Forks...................................SN# TBM00974 — 2,750 Hrs.,
$130,000on Boom, Rear Mount....................
SN# 293402 – 29,000 Mi.,2007 National 690:
Page 6 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
3144 Hwy 74 EastMonroe, NC 28112
www.brookssales.com
HoursMon.-Fri. 7:30am-5:00pmSat. 8am-12pm
BROOKS SALES FOR CASE SERVICE & SALES
Call Jimmy for Service & Brian for Parts.
704-233-4242 800-443-7569
The Best Parts & Technicians for your Case Skid Steer Loaders & CTL Track Machinesare at Brooks Sales. They are waiting for you.
Mon.-Fri. 7:30am-5:30pmSat. 8am-12pm
Call Jimmy for Service
& Brian for Parts.
704-233-4242800-443-7569
7
4:28 PM
7
4:28 PM
The Best Parts & Technicians for your
Case Skid Steer Loaders & CTL Track Machines are
at Brooks Sales. They are waiting for you.
YOUR COMPLETE RENTAL RESOURCE
ORLANDO
TAMPA
JACKSONVILLE2750 Imeson Road
Jacksonville, FL 32220
PRO
FESSIO
LNAL
Your Complete Rental Resource!S O
OSHOR SHOR PRO
Your Complete Rental Resource!G & SUSS O
RING & SURING & SUFESSION
L PPLY PPLY
NAL source!
steel trench shield
11128 Boggy Creek RdORLANDO
slide rail system
gas monitors
Other Supplies:
O YYOUR COMPLET
Jacksonville, FL 322202750 Imeson Road
JACKSONVILLE
Tampa, FL 336377532 Malta Lane
TAMPA
407-854-9949Orlando, FL 32824
11128 Boggy Creek Rd
CEESOURAL RENTE R RENTOUR COMPLET TE R
fall protectionblowers/hosesguideframequicksheet™ build-a-box™manhole shieldsOther Supplies:
Equipment Distributorq p
CE
SPECIALS
Fredericksburg, VAAshland, VA
Suffolk, VAManassas, VA
CONTACTRick Marsh • (540) 220-4333
2007 CASE SV208PD, STK# CE4364, 66” PAD FOOTROLLER, 399 HRS ..........................................$49,0002006 CASE 850K, STK# CE4152, CAB, A/C, 24”SHOES,120”BLADE, 1817 HRS ..................................$59,5002006 CASE CX210, STK# CE4177, A/C, THUMB,PLUMBING, 42”BKT., 3145 HRS ....................$78,0002000 DEERE 555G LOADER, STK# RM8060, 4 IN 1 BKT,GOOD GROUND WORK ..................................$21,5002006 CASE 580M, STK# CE4271, 2WD, TURBO,OROPS, STD. HOE, 24” BKT, 695 HRS ..........$39,0002007 CASE 580M, STK# CE4360, 2WD, OROPS, KENTHAMMER, 445 HRS ........................................$63,0002006 TAKEUCHI TL150, STK# KA0648, OROPS, 80”TOOTH BKT, NEW TRACKS, 1975 HRS ..........$27,5002005 HAMM 3307, STK# CU3587, 66” SMOOTHDRUM, 797 HRS ............................................$37,5001992 CASE 850E, STK# CU3577, 20” SHOES, GOODGROUND WORK, 3093 HRS ..........................$19,5001999 CASE 550G, STK# RM8070, 16” SHOES, GOODGROUND WORK, 2275 HRS ..........................$22,5002010 TAKEUCHI TB235, STK# KA0834, WARRANTY,THUMB, 18” QC BKT, 219 HRS ......................$36,0002002 CASE 580M, STK# CU3584, 4WD, CAB, A/C, E-STICK, 24” BKT, 2289 HRS ............................$39,0002007 TAKEUCHI TL130, STK# CU3545, CAB, HEAT,A/C, 67” SMOOTH BKT, 745 HRS ..................$26,5002003 TAKEUCHI TL150, STK# CU3564, CAB, HEAT,A/C, 80” TOOTH BKT, 2870 HRS ....................$27,5002008 TAKEUCHI TL140, STK# KA0791, WARRANTY,OROPS, 76” TOOTH BKT, 589 HRS ................$34,500
2006 TAKEUCHI TL150STK# CU3586, CAB, HEAT,
A/C, 80” TOOTH BKT, 1040 HRS $32,000
2008 KUBOTA U645STK# CU3583, ANGLE
BLADE, 36” BKT, 496 HRS$34,500
from
Since 1970
Copy Writer
A
Archie Bell
G None
N Lauren Pulwer
5 None
N Leandro Hernandez
F Condensed Black
N
CMYK 534 ppi, 4
questions regarding this material please call P
A message from the NBA and its playersA message from the NBA and its players
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 7
Page 8 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Highland Tractor Co. Hosts Customer Appreciation Day
This JD 644K got a workout from a potential buyer.
Discussing the attributes of the JD672GP grade control system.
The John Deere 650K with grade control isstarting to carve out the lake.
The John Deere and Hitachi excavator display drew a crowd.
Taking the equipment out on thework site.
Chuck Counts, president of GradeWorks LLC, explainsthe grade control system to the operator of the JohnDeere 672GP.
Highland Tractor Co. hosted a customer appreciationday on Sept. 13 at its main office in Ocala, Fla. Theevent gave visitors the opportunity to view and try out
various pieces of equipment including a grader and a dozerequipped with a Topcon 3D MC2 blade control system.
Highland Tractor had GradeWorks LLC, a constructionGPS and site work surveying company, come in and lay outa road, building pad and pond at the back of the property.Contractors were able use the John Deere 650K dozer and672GP motorgrader equipped with the 3d MC2 blade controlsystem to cut the road and building pad to grade.
In addition to the full John Deere construction and forestryline, Highland Tractor also represents Hitachi excavators andBomag compaction equipment. The home office is in Ocalaand there is a branch in Chiefland, Fla. For more information,call 888/711-0142 or visit www.highlandtractor.com.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 9
Page 10 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
WANTED: LATE MODEL USED CRANES! All Brands Considered.
Ring Power Crane offers premier machines from America’s leading crane manufacturers, including Manitowoc, Grove, National Crane, Broderson, Manitex and Badger Equipment Company, and serves from the southeastern United States to the Caribbean and Latin America.
FLORIDASt. Augustine904.737.7730
NEW & USED SALES RENTALS PARTS SERVICE RingPowerCrane.com
Pompano Beach Tampa/Orlando Miami (International Sales)
GEORGIAUnion City770.774.7300
NORTH CAROLINAConcord704.795.3636
SOUTH CAROLINALadson
WE PERFORM ANNUAL CRANE INSPECTIONS!
We are the NEWNational Boom Truck Dealer in Georgia!
NEWUNITS
UNION CITY, GAIN STOCK
Na Nat at tio io n na l B
We We a are re t th h B Bo oo m T Tr ruc uc ck
NEW
e e NEW k De De ea ale le r i in G
SEW
S
Ge Ge eo or rg gia ia !
IN STUNION CITY
UNITS
OCKIN ST, GAUNION CITY
UNITS
RFORM ANWE PEW & USEEN
UAL CRANNRFORM AN REND SALES
INSPEEUAL CRANARTS P PARTS S ALTTAL REN
S!CTION INSPERVICE SEARTS
RingPowerCrane
.comRingPowerCrane
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 11
Page 12 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
RW Moore, Benchmark Host Annual Skeet Shoot Event
Troy Mitchell, Waste Industries, Apex, N.C., blasted the clay out of the sky with his Remington over andunder 12 gauge.
Jason Barber, Carolina Excavator Services, Raleigh, N.C., sawthe direct benefits of increased production when a machine isequipped with a Topcon device.
Demonstrating the Topcon RL-H4C rotating laser areTracy Skipper (L) and Mike Gaillard, both ofBenchmark Tool & Supply.
(L-R): Tony Jackson, RW Moore EquipmentCompany; Matthew Paul, CieszkoConstruction, Havelock, N.C.; and Dan Moorechat about the annual event.
John Caraway (L), Caraway Logging, New Bern, N.C.,and Dan Moore talk a little business between events.
When asked how the shooting went Walter Hudson (L) and JohnPatrick, both of Sullivan Eastern Inc., Durham, N.C., both saidthey were having an enjoyable day that sure beat sitting in theoffice.
RW Moore Equipment Company and Benchmark Tool & Supplyheld a joint skeet shooting customer appreciation event atDrakes Landing, the premier hunting preserve in Fuquay Varina,
N.C. The well-attended Sept. 14. event drew 200 contractors from east-ern North Carolina.Drakes Landing has many shooting points offering various situations
that mimic an actual hunting experience as well as real hunts such asquail and western style pheasant.RW Moore and Benchmark had a number of John Deere machines
on hand for customers to try out. Several of them were equipped withlaser and GPS systems to help the user move the dirt precisely.
see SKEET page 62
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 13
Se Habla Espa~nol
M.D. MOODY&SONSINC.M.D. MOODY&SONSINC.
SINCE 1913www.mdmoody.com
JACKSONVILLE, FL 32207904-737-4401 • Fax: 904-636-0532
PARTSPARTS
New Website
Coming Soon!
Page 14 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Ph. 770-949-9231 • Fax: 770-947-9916
Visit www.sealsaver.com for more information or contact us at 1-800-683-5189
Exclusively manufactured by:
Fluid ControlServices, Inc.1155 Allgood Road • Suite 15
Marietta, GA 30062
1-800-683-5189Fax: 770-509-5832
The SEAL SAVER*WILL:
• Eliminate rod scoring
• Extend the life of cylinder seals
• Protect cylinders from the elements
• Prevent pitting due tochemical washes
• Reduce particle contamination of
hydraulic systems
• Minimize dings and dents associated with
falling debris*Patented
Made inthe USA
SEAL SAVERhas proven effective in
Recycling, Construction,Mining, Rock Quarries, Waste
Management, Refineries, WoodProducts Processing, Steel
Mills and Hot Slag Industries.
STATEMENT OF OWNERSHIP, MANAGEMENT AND CIRCULATION
Required by 19 USC 3685
Title of publication: CONSTRUCTION EQUIPMENTGUIDE SOUTHEAST EDITION; Publication Number:1058-6474; Date of filing: Sept. 25, 2012; Frequency:Bi-weekly, 26 issues annually; Annual Subscriptionprice: $65.00; Complete mailing address of knownoffice of publication: 470 Maryland Dr., Ft. Washington,PA 19034; Publisher’s general business office: 470Maryland Dr., Ft. Washington, PA 19034; Publisher’sname and address: Richard McKeon, 6060 PiedmontRow Dr. South Ste 555, Charlotte, N.C. 28210; Editor inChief: Craig Mongeau, 470 Maryland Dr., Ft.Washington, PA 19034; Owner: CONSTRUCTIONEQUIPMENT GUIDE SOUTHEAST EDITION, 6060Piedmont Row Dr. South Ste 555, Charlotte, N.C. 28210;Edwin M. McKeon Jr., 470 Maryland Dr., Ft. Washington,PA 19034; Joseph McKeon, 5875 N. Lincoln Ave. Suite227, Chicago, IL 60659; Richard McKeon, 6060 PiedmontRow Dr. South Ste 555, Charlotte, N.C. 28210; Knownbondholders, mortgages, and other security holders:None, Issue date for circulation data below 9/19/12;Extent of circulation (Average number of copies dur-ing preceding 12 months): Net press run 20,308; paidcirculation through agents 0; through mail subscription20,044; free distribution 0; total distribution 20,044;copies not distributed 264; return from news agents 0;Total 20,308; Percent Paid and/or Requested Circulation100%; Actual number of copies for issue publishednearest to filing date: Net press run 22,380; paid circu-lation through agents 0; through mail subscription 22,105;free distribution 0; total distribution 22,105; copies not dis-tributed 275; return from news agents 0; Total 22,380;Percent Paid and/or Requested Circulation 100%.
I certify that the above statements made by me are cor-rect and complete.
/s/ Edwin M. McKeon, Jr., President/CEO
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 15
Page 16 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Atlantic Coast Toyotalift Moves Into Charlotte MarketBy Cindy Riley CEG CORRESPONDENT
Since opening its new location inCharlotte, N.C., in June 2012, Atlantic CoastToyotalift’s mission has been clear.
“We want to be a premier dealer of quali-ty compact equipment and accessories,”explained Patrick Cudicio, regional opera-tions manager of ACT ConstructionEquipment. “Charlotte remains one of themost robust markets in North Carolina. As aresult, it provides our dealership with theperfect opportunity to expand and grow byoffering our line of quality products andservices. Takeuchi, our line of compact trackloaders and excavators, has a proven recordof manufacturing top-notch equipment. Wehave been very successful with Takeuchi andare excited to enter the Charlotte region withthem.”
With six employees in the new Charlottestore, ACT’s staff handles everything fromsales to aftermarket support. The full-serv-ice dealership provides sales, service, partsand rentals. Besides Takeuchi, it carries aprofessional line of Stihl products, aerialwork platforms by JLG and Absolute EZ-Upand Chicago Pneumatic construction equip-ment and tools. For excavator and loadermachines the business also offers a variety ofbuckets and attachments manufactured byCID, Loflin and Fecon.
“Our customers are entrepreneurs — bigand small,” said Cudicio, who overseesoperations in eastern North Carolina, as wellas in the Charlotte area. “We see everyonefrom plumbers, landscapers, mulch andstone suppliers, builders of retention wallsand pools to residential, commercial or civilcontractors and anyone else who needs todig or move dirt. However, we tend to work
closely with that niche of the market thatfeels underserved by the larger, big namedealerships. Building a relationship with theowner/operator of a company who dependson others for their success can be reallyrewarding.”
According to Cudicio, customer serviceand quality merchandise are crucial to suc-cess at the company.
“Products that are reliable year after yearkeep customers profitable. However, cus-
tomer service keeps them coming back. It’smore than just having something availablewhen they need it or fixing it the first time,every time. It has more to do with buildinglasting relationships and maintaining effec-tive honest communication. It’s the execu-tion of customer service that makes up ourculture at ACT.
“Our short-term goals are encapsulated bythe single premise — to build relationships.We want to go out and make face-to-facecontacts and begin inroads towards a busi-ness cycle that revolves around sales, serv-ice, parts and rentals. Our goal is to get ourmessage out regarding who and what we areabout, and the advantages ACT brings to themarketplace. Our long-term goal is simplein that we don’t measure our success againstany other industry or competitor, nor do wegauge our success purely on a balance sheet.We are successful when we are recognizedfor what we are, which is a high-qualitycompany that offers value-added productsand services.”
Seeing things from the customers’ pointof view is one thing that the team at ACTtakes a lot of pride in.
“Each and every person at ACT is pas-sionate about one thing, and that’s helpingmake someone’s situation better. At ACT weunderstand that the customer calling is nothappy that they need a part, or that they needa service technician to fix their machine sit-ting in a half dug out foundation. They havea problem that needs to be resolved, and usu-
ally sooner than later. A panicked foremanlooking at missing a deadline becomes aloyal repeat customer when you get him outof that jam. The passion for our work stemsfrom remedying an issue and gettingmachines and people back to work.”
Another aspect of customer relationshipsemphasized at ACT is not just being a busi-ness in any given place, but being a businessthat understands the community and itsneeds as well.
“We are an established company with along history of providing experience basedsolutions,” added Cudicio. “Though we maybe new to the Charlotte region, we have beenin business for more than 40 years and havebeen, and remain, affiliated with many of thetop brand names in the industry.Furthermore, we have a proven track recordand are not going anywhere. Our aim is tobe a member of the community for a longtime. We understand how hard business istoday, and more so how hard the past fewyears have been. We strive hard to providesound, fast solutions when a machine isdown or when more equipment is needed tocomplete a job. We are ready to implementcreative solutions to challenges while main-taining the highest level of teamwork andintegrity.”
(This story also can be found onConstruction Equipment Guide’s Web siteat www.constructionequipmentguide.com.)CEG
(L-R) are Jay Williford, president, Robert Wallace, Patrick Cudicio, Mike Hilliard and Avery Hill.
The company has a number of new Takeuchi excavators and track loaders on theCharlotte yard ready to go for its customers.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 17
TORO / DINGO TDAUGER, Serial # 280000478, ID # AU285, AugerToro Dingo, HIGH TORQUE POWER HEAD..................................$920
2008 SULLAIR 185CFM, Serial # 200803190066, ID # X080010,1495 Hours, Air Compressor, CAT diesel engine ....................$7,800
TORO / DINGO TDAUBIT12, Serial # 12AUBIT290, ID # AU290,12” Auger Bit Toro ..........................................................................$115TORO / DINGO TDAUBIT18, Serial # 18AUBIT291, ID # AU291,18” Auger Bit Toro ..........................................................................$115TORO / DINGO TDAUBIT6, Serial # 250000176, ID # AU287, 6”Auger Bit Toro..................................................................................$115TORO / DINGO TDAUBIT9, Serial # 260000170, ID # AU288, 9”Auger Bit Toro Dingo ......................................................................$115
TORO / DINGO TDAUEX12, Serial # 12AUEX293, ID # AU293, 24”Auger Extension Toro ........................................................................$58
2010 CATERPILLAR 420E IT, Serial # 0DAN00450, ID # 100378,940 Hours, Backhoe, 4x4, Erops, A/C ....................................$71,9002010 CATERPILLAR 420E IT, Serial # 0DAN00158, ID # 100790,2072 Hours, Backhoe, 4x4, Erops, A/C ..................................$67,0002010 CATERPILLAR 420E IT, Serial # 0PHC00893, ID # 090259A,205 Hours, Backhoe, 4X4, Erops, A/C, Aux. hyd. Auto shift, tire @205hrs 95-99% ........................................................................$80,0002011 CATERPILLAR 420E ST, Serial # 0DJL00730, ID # 100381,544 Hours, Backhoe, 4x4, Erops, A/C ....................................$78,9002010 CATERPILLAR 420E ST, Serial # 0DJL00669, ID # 100690,522 Hours, Backhoe, 4x4, Erops, A/C ....................................$68,9002010 CATERPILLAR 420E ST, Serial # 0DJL00401, ID # 100846,780 Hours, Backhoe, 4x4, Erops, A/C ....................................$67,800
CATERPILLAR 771BED, Serial # U771DBEDMS1449, ID #MS1449, 771 Bed ......................................................................$8,689CATERPILLAR 773BED, Serial # U773BEDMS1826, ID # MS1826,773 Bed........................................................................................$9,711
CATERPILLAR 690BLADE, Serial # U690BLADEBL215, ID #BL215, 690 Blade group - Part #BD690U22 ............................$7,156CATERPILLAR D10BLADE, Serial # UD10NBLADEBL217, ID #BL217, D10N SU BLADE, PART #9W2246 ..............................$5,622CATERPILLAR D4BLADE, Serial # D4BLADEBL51, ID # BL51, D4GXL Blade ..........................................................................................$920CATERPILLAR D6BLADE, Serial # 0S1D00045, ID # BL241, D6KFoldable Blade ............................................................................$1,150CATERPILLAR D6NBLADE, Serial # UD6NBLADEBL288, ID #BL288, D6N BLADE....................................................................$1,022CATERPILLAR D7BLADE, Serial # UD7BLADEBL287, ID # BL287,D7R BLADE, SU..............................................................................$511CATERPILLAR D8BLADE, Serial # UD8BLADEBL519, ID # BL519,CAT D8 U BLADE, MOLDBOARD ONLY, SINGLE TILT, SPILL GAURD....................................................................................................$11,244CATERPILLAR D9RBLADE, Serial # UD9RBLADEBL251, ID #BL251, D9R U BLADE..............................................................$11,2441900 CATERPILLAR MISC ITEMS, Serial # U563BLADEBL10, ID# BL10, CS563 BLADE ..................................................................$716
MISCELLANEOUS OTHER MISC ITEMS, Serial # MS824, ID #MS824, Rezloh 81.5” bolt on Razor Edge ....................................$288
2007 JLG 400S, Serial # 0300110435, ID # 270455, 1630 Hours,Boom Lift, 4 wheel drive, Basket, 2 piec boom, tires @ 1630hrs 85%....................................................................................................$29,0002006 JLG 400S, Serial # 0300096897, ID # X01118, 2301 Hours,Boom Lift, 4 wheel drive, Basket, 2 piec boom, tires @ 2301hrs 85%....................................................................................................$25,0002006 JLG 400S, Serial # 0300097260, ID # X01122, 1690 Hours,40’ Lift ........................................................................................$25,0002005 JLG 400S, Serial # 88051, ID # X00867, 2124 Hours, 40’ Lift....................................................................................................$23,900
2005 JLG 450AJ, Serial # 88287, ID # X00881, 2027 Hours, 45’Lift ..............................................................................................$26,0002007 JLG 460SJ, Serial # 0300111262, ID # 270540, 1546 Hours,46’ Lift ........................................................................................$37,5002006 JLG 460SJ, Serial # 0300099247, ID # X01131, 1031 Hours,46’ Lift ........................................................................................$35,0002005 JLG 460SJ, Serial # 0300087868, ID # X00890, 1992 Hours,46’ Lift ........................................................................................$29,9002005 JLG 460SJ, Serial # 88298, ID # X00888, 1916 Hours, 46’ Lift....................................................................................................$29,9002005 JLG 460SJ, Serial # 87888, ID # X00891, 1904 Hours, 46’Lift ..............................................................................................$29,900
ALLU 304BRKTALL, Serial # BRK651, ID # BRK651, Allu Mini ExcMounting Bracket............................................................................$288ALLU 330BRKTALL, Serial # B52812, ID # BRK609, Allu D LinkageMounting Bracket............................................................................$920ALLU 330BRKTALL, Serial # B52811, ID # BRK610, Allu D LinkageMounting Bracket............................................................................$920ALLU 330BRKTALL, Serial # B52813, ID # BRK606, Pin On SSeries, Allu D Linkage mounting bracket ......................................$920ALLU 330BRKTALL, Serial # 000B52810, ID # BRK612, Pin on SSeries, Allu DB Linkage mounting bracket ................................$1,200ALLU 330BRKTALL, Serial # BRK663, ID # BRK663, Pin on SSeries, Allu DB Linkage mounting bracket ................................$1,200ALLU 330BRKTALL, Serial # BRK665, ID # BRK665, Pin on SSeries, Allu DB Linkage mounting bracket....................................$920CATERPILLAR 301BRKT, Serial # 147-6627BRK533, ID # BRK533,301 H45 Bracket..............................................................................$229 2002 CATERPILLAR 302BRKT, Serial # 155-4468/220184, ID #220184, 302 H50 Bracket ..............................................................$288 2002 CATERPILLAR 302BRKT, Serial # 155-4468/220185, ID #220185, 302 H50 Bracket ..............................................................$288 2005 CATERPILLAR 303BRKT, Serial # 168-8703/251060, ID #251060, 303 H63 Bracket ..............................................................$336 2005 CATERPILLAR 303BRKT, Serial # 000251080, ID # 251080,303 H63 Bracket..............................................................................$558 2005 CATERPILLAR 303BRKT, Serial # 000251084, ID # 251084,303 H63 Bracket..............................................................................$575 2004 CATERPILLAR 303BRKT, Serial # 168-8698/241278, ID #241278, 303 H63 Bracket ..............................................................$575 2003 CATERPILLAR 303BRKT, Serial # 168-8703/230933, ID #230933, 303 H63 Bracket ..............................................................$336CATERPILLAR 303BRKT, Serial # 168-8698BRK175, ID # BRK175,303 H50 Bracket..............................................................................$336CATERPILLAR 303BRKT, Serial # 168-8703BRK503, ID # BRK503,303 H50 Bracket..............................................................................$353CATERPILLAR 303BRKT, Serial # 168-8698BRK504, ID # BRK504,303 H63 Bracket..............................................................................$353 2007 CATERPILLAR 304BRKT, Serial # 277-8941270901, ID #270901, 304C/305C H63 Hammer Top........................................$288 2006 CATERPILLAR 304BRKT, Serial # 000260201, ID # 260201,304/305 CVP16 Bracket ................................................................$288 2004 CATERPILLAR 304BRKT, Serial # 000241831, ID # 241831,304/305 CVP16 Bracket ................................................................$288 2004 CATERPILLAR 304BRKT, Serial # 000241538, ID # 241538,304/305 H63 Bracket......................................................................$288 2003 CATERPILLAR 304BRKT, Serial # 000231013, ID # 231013,304/305 H63 Bracket......................................................................$288 2001 CATERPILLAR 304BRKT, Serial # 000210249, ID # 210249,305/305 H63 Bracket......................................................................$288CATERPILLAR 304BRKT, Serial # 168-8710230342, ID # 230342,304/305 H63 Bracket......................................................................$288CATERPILLAR 304BRKT, Serial # 277-8941BRK291, ID # BRK291,304/305 H63 Bracket......................................................................$288CATERPILLAR 304BRKT, Serial # 277-8941BRK290, ID # BRK290,304C/305C H63 Hammer Top ......................................................$288CATERPILLAR 304BRKT, Serial # 304BRKTBRK493, ID # BRK493,304C/305C H63 Hammer Top ......................................................$288CATERPILLAR 304BRKT, Serial # 265-7461BRK687, ID # BRK687,304C/305C Swivel CVP16 Plate - Still need mounting bracket..$288CATERPILLAR 304BRKT, Serial # 226-7696BRK505, ID # BRK505,Bracket for hammer ........................................................................$288 2010 CATERPILLAR 307BRKT, Serial # 7Q-8466BRK653, ID #BRK653, 307/308 H70-H90,CVP40 Bracket ................................$288CATERPILLAR 307BRKT, Serial # 7Q-8466BRK309, ID # BRK309,307C/308C Bracket - H70-H90, CVP40)......................................$288
2004 CATERPILLAR 315BRKT, Serial # 000240388, ID # 240388,315 Hammer Top ............................................................................$575 2003 CATERPILLAR 315BRKT, Serial # 000230980, ID # 230980,315 Hammer Top ............................................................................$575CATERPILLAR 315BRKT, Serial # 129-1545BRK138, ID # BRK138,315C Bracket - H100-H120, CVP75 ............................................$575CATERPILLAR 318BRKT, Serial # 319BRKTBRK677, ID # BRK677,B Linkage bracket to pick up allied 1600 compactor....................$575CATERPILLAR 318BRKT, Serial # 112-5537BRK223, ID # BRK223,H115-H130, CVP75 (B Linkage) ..................................................$575CATERPILLAR 318BRKT, Serial # 112-5537BRK568, ID # BRK568,H115-H130, CVP75 (B Linkage) ..................................................$575CATERPILLAR 320BRKT, Serial # 112-5537BRK420, ID # BRK420,B Linkage Bracket............................................................................$575CATERPILLAR 320BRKT, Serial # 112-5537BRK424, ID # BRK424,B Linkage Bracket............................................................................$575CATERPILLAR 320BRKT, Serial # 112-5537BRK613, ID # BRK613,B Linkage Bracket............................................................................$575CATERPILLAR 320BRKT, Serial # 112-5537BRK715, ID # BRK715,Mounting Bracket B ........................................................................$575CATERPILLAR 320BRKT, Serial # 112-5537BRK778, ID # BRK778,Mounting Bracket B ........................................................................$575CATERPILLAR 322BRKT, Serial # 128-4341BRK216, ID # BRK216,H120-H140, CVP110 - S Linkage ................................................$288CATERPILLAR 322BRKT, Serial # 128-4341BRK217, ID # BRK217,H120-H140, CVP110 - S Linkage ................................................$288CATERPILLAR 322BRKT, Serial # 128-4341BRK218, ID # BRK218,H120-H140, CVP110 - S Linkage ................................................$288CATERPILLAR 322BRKT, Serial # 128-4341BRK23, ID # BRK23,H120-H140, CVP110 - S Linkage ................................................$288CATERPILLAR 322BRKT, Serial # 128-4341BRK45, ID # BRK45,H120-H140, CVP110 - S Linkage ................................................$288CATERPILLAR 322BRKT, Serial # 128-4341BRK538, ID # BRK538,H120-H140, CVP110 - S Linkage ................................................$288CATERPILLAR 324BRKT, Serial # 251-0068BRK704, ID # BRK704,CB Linkage Bracket ........................................................................$288CATERPILLAR 324BRKT, Serial # 251-0068BRK713, ID # BRK713,CB Linkage Bracket ........................................................................$288CATERPILLAR 324BRKT, Serial # 251-0068BRK714, ID #BRK714, CB Linkage Bracket ........................................................$288CATERPILLAR 324BRKT, Serial # 251-0068, ID # BRK745, CBLinkage Bracket ..............................................................................$288CATERPILLAR 324BRKT, Serial # 251-0068BRK746, ID # BRK746,CB Linkage Bracket ........................................................................$288CATERPILLAR 324BRKT, Serial # 1124833-BRK360, ID # BRK360,CVP110 - C Linkage ......................................................................$288CATERPILLAR 324BRKT, Serial # 251-0068BBRK591, ID #BRK591, H115-H140, CVP110 (CB Linkage) ..............................$288CATERPILLAR 325BRKT, Serial # U325BRKTBRK885, ID #BRK885, 325 C-linkage bracket ....................................................$716CATERPILLAR 325BRKT, Serial # 251-0068BRK384, ID # BRK384,CB Linkage Bracket ........................................................................$460CATERPILLAR 325BRKT, Serial # 325BRK337, ID # BRK337,CVP110 - C Linkage ......................................................................$460CATERPILLAR 325BRKT, Serial # 112-4833BRK520, ID # BRK520,H115-H140, CVP110 (C Linkage) ................................................$460CATERPILLAR 325BRKT, Serial # 112-4833BRK589, ID # BRK589,H115-H140, CVP110 (C Linkage) ................................................$460CATERPILLAR 330BRKT, Serial # 241-3471BRK207, ID # BRK207,C Linkage Bracket, H160, 330C Linkage for short reach application..............................................................................................................$460CATERPILLAR 330BRKT, Serial # 251-4647BRK370, ID # BRK370,DB Bracket ......................................................................................$460CATERPILLAR 330BRKT, Serial # 251-4647BRK541, ID # BRK541,DB Bracket ......................................................................................$460CATERPILLAR 345BRKT, Serial # 241-3471BRK564, ID # BRK564,H160 - C Linkage............................................................................$920CATERPILLAR 345BRKT, Serial # 255-7552BRK235, ID # BRK235,H160-H180 TB Linkage Bracket ....................................................$920CATERPILLAR 345BRKT, Serial # 255-7552BRK260, ID # BRK260,H160-H180 TB Linkage Bracket ....................................................$920CATERPILLAR 345BRKT, Serial # 255-7552BRK234, ID # BRK234,TB Linkage Mounting Bracket........................................................$920 2007 CATERPILLAR BHLBRKT, Serial # 00MS00233, ID #261746, 307C Bracket....................................................................$173 2003 CATERPILLAR BHLBRKT, Serial # 230839, ID # 230839,BHL Top for CVP40 ........................................................................$173CATERPILLAR BHLBRKT, Serial # 251-4624BRK159, ID #BRK159, 446D H100 Bracket ........................................................$173
CATERPILLAR BHLBRKT, Serial # BHLBRKT-BRK559, ID #BRK559, BHL Auger Mounting Bracket ........................................$173CATERPILLAR BHLBRKT, Serial # BHLDBRKT-BRK631, ID #BRK631, BHL Swivel Bracket ........................................................$173CATERPILLAR BHLBRKT, Serial # 231-5149BRK230, ID #BRK230, BHLD/E Bracket - CVP40 Swivel ..................................$173CATERPILLAR BHLBRKT, Serial # 311-2599BRK655, ID #BRK655, BHLD/E Bracket - H70-H90, CVP40 Swivel ................$173 2007 CATERPILLAR BHLBRKTW, Serial # 270635, ID # 270635,307C/416-420D Hammer Top ......................................................$173 2006 CATERPILLAR BHLBRKTW, Serial # 000260780, ID #260780, 307C/416-420D Hammer Top........................................$173 2006 CATERPILLAR BHLBRKTW, Serial # 000260952, ID #260952, 307C/416-420D Hammer Top........................................$173 2005 CATERPILLAR BHLBRKTW, Serial # 000250811, ID #250811, 307C/416-420D Hammer Top........................................$173 2005 CATERPILLAR BHLBRKTW, Serial # 000250813, ID #250813, 307C/416-420D Hammer Top........................................$173 2005 CATERPILLAR BHLBRKTW, Serial # 000250817, ID #250817, 307C/416-420D Hammer Top........................................$173 2004 CATERPILLAR BHLBRKTW, Serial # 000240289, ID #240289, 307C/416-420D Hammer Top........................................$173CATERPILLAR BHLBRKTW, Serial # 209-3306240289A, ID #240289A, BHL Pin Lock Bracket....................................................$173CATERPILLAR SSBRKTA, Serial # 0BRK00699, ID # BRK699, SSLAuger Bracket ..................................................................................$115CATERPILLAR SSBRKTH, Serial # 269-7807BRK143, ID #BRK143, SSL H55/H65 Bracket ....................................................$115CATERPILLAR SSBRKTH, Serial # 269-7807BRK478, ID #BRK478, SSL H55/H65 Bracket ....................................................$115CATERPILLAR SSBRKTH, Serial # 269-7807BRK484, ID #BRK484, SSL H55/H65 Bracket ....................................................$115CATERPILLAR SSBRKTH, Serial # 0BRK00633, ID # BRK633, SSLH55/H65 Bracket ............................................................................$115JOHN DEERE MISC ITEMS, Serial # JD370-BRKT, ID # BRK552,JD 370 Bracket ................................................................................$345MISCELLANEOUS OTHER MISC ITEMS, Serial # JCBBRKT-BRK313, ID # BRK313, Rocky Mountain JCB160 Bracket for CVP75..........................................................................................................$345
2011 CATERPILLAR BA18H, Serial # 0AZN03472, ID # BR255,Hyd Angle Broom........................................................................$3,4502011 CATERPILLAR BA18H, Serial # 0AZN03441, ID # BR256,Hyd Angle Broom........................................................................$3,450CATERPILLAR BP15B, Serial # 0MPB01063, ID # BR97, SSL PickUp Broom ....................................................................................$2,300CATERPILLAR BP18B, Serial # 0DBP01630, ID # BR267, SSL PickUp Broom ....................................................................................$3,200CATERPILLAR SA30, Serial # 0H1W00175, ID # BR235, AngleBroom for Fusion w/wtr ..............................................................$7,4752010 CATERPILLAR THTB, Serial # 000100406, ID # BM23,Telehandler Truss Boom ................................................................$920 2010 CATERPILLAR THTB, Serial # 000100412, ID # BM24,Telehandler Truss Boom ................................................................$920 2010 CATERPILLAR THTB, Serial # THTB-BM25A, ID # BM25,Telehandler Truss Boom ................................................................$920 2010 CATERPILLAR THTB, Serial # THTB-BM27A, ID # BM27,Telehandler Truss Boom ................................................................$920 2009 CATERPILLAR THTB, Serial # THTBBM15, ID # BM15,Telehandler Truss Boom ................................................................$920CATERPILLAR THTB, Serial # 000254227, ID # BM29, TelehandlerTruss Boom......................................................................................$920CATERPILLAR THTB, Serial # 000254226, ID # BM30, TelehandlerTruss Boom......................................................................................$920CATERPILLAR THTB, Serial # 000254224, ID # BM32, TelehandlerTruss Boom......................................................................................$920CATERPILLAR THTB, Serial # 000254223, ID # BM33, TelehandlerTruss Boom......................................................................................$920MAJOR EQUIPMENT 908BA, Serial # 159333, ID # 270842,906/908 Pick Up Broom ............................................................$4,025
2010 ALLU SMH3-12-25, Serial # 10H312001, ID # BU1371, AlluBucket - Drums Worn - fits 46-56,000 lb Excavator ................$8,000CATERPILLAR 30109, Serial # 3019EB1493, ID # EB1493, 9” 301Digging Bucket................................................................................$575CATERPILLAR 30428, Serial # 30428EB273, ID # EB273,304CR/305CR Digging Bucket ......................................................$575
CATERPILLAR 30436, Serial # U30436EB2252, ID # EB2252,304CCR 36” Bucket........................................................................$256CATERPILLAR 31230, Serial # 31230EB239, ID # EB239, 312/31430” HDR Bucket ..........................................................................$1,725CATERPILLAR 31230, Serial # U31230EB1804, ID # EB1804, 31430” Bucket ......................................................................................$511CATERPILLAR 31236, Serial # U31236EB1637, ID # EB1637, 31236” Bucket....................................................................................$1,000CATERPILLAR 31236, Serial # U31236EB1988, ID # EB1988, 31236” Bucket ......................................................................................$800CATERPILLAR 31436, Serial # U31436BU2112, ID # BU2112, 31436” Bucket....................................................................................$1,000CATERPILLAR 31542, Serial # U31542EB1839, ID # EB1839, 31542” Bucket....................................................................................$1,500CATERPILLAR 31542, Serial # U31542EB2520, ID # EB2520, 31542” Bucket....................................................................................$1,200CATERPILLAR 31548, Serial # 84EX00097A, ID # EB1604, 31548” bucket ....................................................................................$1,725CATERPILLAR 31824, Serial # U31824BU1666, ID # BU1666, 31824” Bucket, B linkage ..................................................................$1,000CATERPILLAR 31830, Serial # 0W2F00111, ID # BU695, 318 30”HD bucket, B Linkage..................................................................$1,000CATERPILLAR 31830, Serial # 0Z1K17383, ID # BU1618, 318/31930” HD bucket ................................................................................$575CATERPILLAR 31830, Serial # WAT014043, ID # BU1619,318/319 30” HD bucket..................................................................$575CATERPILLAR 31842, Serial # 0W2F00227, ID # BU922, 318 42”HD bucket, B Linkage..................................................................$1,200CATERPILLAR 31848, Serial # U31848BU1507, ID # BU1507, 31848” Bucket, B linkage ..................................................................$1,500CATERPILLAR 32024, Serial # “C041317A1-24”“BKT”, ID #C041317A1, 320 24” bucket, Fits 318C/320C ESCO ..............$1,000CATERPILLAR 32030, Serial # 0WAT11676, ID # BU1341, 30” HDRBucket ..........................................................................................$1,200CATERPILLAR 32054, Serial # U32054BU1825, ID # BU1825, 32054” Bucket, B linkage ..................................................................$3,0001900 CATERPILLAR 32224, Serial # N32224AR58, ID # AR58,24” 322 HD Bucket......................................................................$1,0001900 CATERPILLAR 32224, Serial # 32224BF63K, ID # BF63, 24”GP Bucket, S Linkage..................................................................$1,0001900 CATERPILLAR 32224, Serial # 32224BF62K, ID # BF62, 24”HD Bucket, S Linkage ................................................................$1,000CATERPILLAR 32224, Serial # C040361A1-24”, ID # C040361A1,322 24” bucket, Fits 322C..........................................................$1,000CATERPILLAR 32224, Serial # C052032A1-24” BKT, ID #C052032A1, 322 24” bucket, Fits 322C....................................$1,0001900 CATERPILLAR 32230, Serial # N32230AR56, ID # AR56,30” 322 HD Bucket......................................................................$1,1001900 CATERPILLAR 32230, Serial # 32230BU166K, ID # BU166,30” HD Bucket ............................................................................$1,200CATERPILLAR 32230, Serial # “C049871A3-30” BKT, ID #C049871A3, 322 30” bucket, Fits 322C....................................$1,200CATERPILLAR 32236, Serial # 32236BU1323, ID # BU1323, 36”322 Bucket ..................................................................................$1,200CATERPILLAR 32236, Serial # 0Z1R10643, ID # BU585, 36” HDR322 Bucket ..................................................................................$1,000CATERPILLAR 32242, Serial # C040160A3-42, ID # C040160A3,322 42” Bucket ............................................................................$1,0001900 CATERPILLAR 32248, Serial # N32248AR60, ID # AR60,48” HD Power Bucket for 322 ....................................................$1,500CATERPILLAR 32260, Serial # U32260BU1683, ID # BU1683, 32260” Bucket, S,B linkage ..............................................................$2,500CATERPILLAR 32448, Serial # U32448BU1573, ID # BU1573, 32448” Bucket, CB linkage................................................................$2,500CATERPILLAR 32460, Serial # 0WAT11725, ID # BU1367, 324 60”Bucket, 2.33 CYD (HD) ..............................................................$2,500CATERPILLAR 32460, Serial # 0WAT05027, ID # BU928, 60” 324HD Bucket, CB Linkage ..............................................................$2,500CATERPILLAR 32460, Serial # 32460BU1142, ID # BU1142, 60”HD Bucket, CB Linkage ..............................................................$2,500CATERPILLAR 32536, Serial # U32536BU2021, ID # BU2021, 32536” Bucket, C linkage..................................................................$1,0221900 CATERPILLAR 32560, Serial # 32560BU226, ID # BU226,60” HD Bucket ............................................................................$2,300CATERPILLAR 33026, Serial # U33026BU2008, ID # BU2008, 33026” Bucket, D linkage..................................................................$2,044CATERPILLAR 34530, Serial # 0Z1K17101, ID # BU1537, 30” HDRBucket - TB Linkage ....................................................................$5,175
AUGER ATTACHMENT
AIR COMPRESSOR
AUGER BITS
AUGER EXTENSION
BACKHOES
BEDS
BLADES
BOLT ON EDGE
BOOM LIFTS
BRACKETS
BROOMS
BUCKETS
2006 JLG 400S, SN# 0300096897, ID# X01118, Boom Lift, 4 wheeldrive, Basket, 2 piec boom, tires @ 2301hrs 85%, 2301 Hrs ..$25,000
1900 ENTEK 31536, SN# 10713, ID# EB66, 315 36” Entek couplerbucket ..............................................................................................$1,725
www.clevelandbrothers.com 866-532-9023 Email: smasisak@clevelandbrothers.com
Low-Hour Rental Fleet Roll Out
866-532-9023www.clevelandbrothers.com
Email: smasisak@clevelandbrothers.comEquipment Located In Pennsylvania, & West Virginia
See next page for more
listings
Page 18 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CATERPILLAR 34542, Serial # U34542BU2262, ID # BU2262, 34542” Bucket, F link ........................................................................$3,578CATERPILLAR 34548, Serial # 0ZIK12800, ID # BU1050, 48” HDRBucket - TB Linkage ....................................................................$5,175CATERPILLAR 34548, Serial # 0Z1K16904, ID # BU1585, 48” HDRBucket - TB Linkage ....................................................................$5,175CATERPILLAR 34548, Serial # Z1K06588, ID # C040845A5, 34548” bucket, Fits 345B..................................................................$5,1751900 CATERPILLAR 34554, Serial # 34554BU262, ID # BU262,54” HD - F Linkage ....................................................................$5,1752006 CATERPILLAR 36575, Serial # Z1K10016, ID # C063703A2,V-Link 75” Bucket........................................................................$7,475CATERPILLAR 904GP, Serial # WFCWGP001766, ID # BH131, 904.80CYD GP Bucket..........................................................................$920CATERPILLAR 904GP, Serial # 904GPBH204, ID # BH204, 905.80CYD GP Bucket..........................................................................$920CATERPILLAR 924GP, Serial # 000128419A, ID # FB561A, 2.3CYDGP ................................................................................................$1,500CATERPILLAR 924LM, Serial # U924LMFB855, ID # FB855, 924LM Bucket....................................................................................$2,044CATERPILLAR 930MH, Serial # 930MHFB570, ID # FB570,4.25CYD MH ..............................................................................$1,200CATERPILLAR 950, Serial # U950COALFB707, ID # FB707, 950Coal Bucket , 114 ........................................................................$4,600CATERPILLAR 963MP, Serial # U963MPFB509, ID # FB509, 963BUCKET, 1.7 CU METER, PART #8V7364 ................................$2,044CATERPILLAR 963MP, Serial # 963MPFB292, ID # FB292, 963C2.5CYD MP Bucket ....................................................................$2,500CATERPILLAR 973GP, Serial # U973GPFB626, ID # FB626, 973GPBUCKET - PART #9V5192..........................................................$1,533CATERPILLAR BHLC18, Serial # BHLD18DB138, ID # DB138, 18”C Series Bucket ..............................................................................$173CATERPILLAR BHLDW36, Serial # CI705000318, ID # DB426, 36”HD Pin Lock Bucket........................................................................$920CATERPILLAR BHLDW36, Serial # 080200391, ID # DB595, 36”HD Pin Lock Bucket........................................................................$920CATERPILLAR BHLGP, Serial # CR612001743, ID # BH206,1.0CYD GP Front Bucket - Is not an IT Bucket ............................$920CATERPILLAR BHLGP, Serial # CV101005172, ID # MS1157,1.4CYD GP Bucket w/BOCE ..........................................................$920CATERPILLAR BHLGP, Serial # CV101005162, ID # MS1158,1.4CYD GP Bucket w/BOCE ..........................................................$920CATERPILLAR BHLGP, Serial # C064052A2-1.4CYD, ID #C064052A2, 430E ST 1.4CYD ......................................................$920 2000 CATERPILLAR M31571, Serial # C004087A2, ID # 231111,M315 71” Swivel Bucket ............................................................$1,725CATERPILLAR M31835, Serial # M31835BU1104, ID # BU1104,M318 35” Bucket ........................................................................$1,380CATERPILLAR M32042, Serial # M32042BU689, ID # BU689,M320 42” Bucket ........................................................................$1,380CATERPILLAR M32230, Serial # M32230-BU1047, ID # BU1047,M322D 30” Bucket......................................................................$1,3802006 CATERPILLAR SSDB54, Serial # 65SSDT001482, ID #260723, SSL 54” Light Material Bucket........................................$345CATERPILLAR SSGP66, Serial # USSGP66SB1681, ID # SB1681,232B 66IN GP BUCKET ................................................................$307CATERPILLAR SSUB66, Serial # SSUB66SB294, ID # SB294, SSL66” Utility Bucket ............................................................................$345 1900 ENTEK 31536, Serial # 10713, ID # EB66, 315 36” Entekcoupler bucket..............................................................................$1,725ESCO CORPORATION 34554, Serial # RH74845, ID # C002828A1,345 54” bucket, 3.0CUYD HDP Bucket ....................................$2,875ESCO CORPORATION 34554, Serial # RH70961, ID # C038291A1,345 54” bucket F Linkage ..........................................................$2,875ESCO CORPORATION E12030, Serial # UE12030EB1301, ID #EB1301, 30IN Bucket, F linkage ....................................................$307 2010 Gar-Bro 423G, Serial # X100145, ID # X100145, ConcreteBucket ..........................................................................................$1,533KENCO 31536SLB, Serial # 141330-1-1, ID # EB1235, 36” Slabbucket - Kenco for 315 excavator ..............................................$2,875WERK-BRAU BHLC18, Serial # DB668, ID # DB668, 18” HD Werk-Brau Bucket......................................................................................$173CATERPILLAR 34574, Serial # 0Z1K17081, ID # BU1517, 74” HDRBucket - TB Linkage ....................................................................$7,475
CATERPILLAR MISC ITEMS, Serial # CP56SFTCAB-MS939, ID #MS939, Fremar Vinyl Cab Enclosure w/heater for CP56 ............$230
CATERPILLAR 350CAB, Serial # U350CABMS756, ID # MS756,350B/350C Cab assembly -Part #19CAB0022B..........................$256
2006 Multiquip VH52A6M, Serial # V5-BN1682, ID # 260975, 30’High Cycle Cable ..............................................................................$51
2010 TOKU CH-3H, Serial # 810099, ID # X100093, ChippingHammer ..........................................................................................$102 2010 TOKU CH-3H, Serial # 810093, ID # X100096, ChippingHammer ..........................................................................................$102 2009 TOKU CH-3H, Serial # 901110, ID # X090204, ChippingHammer ..........................................................................................$102 2009 TOKU CH-3H, Serial # 901111, ID # X090206, ChippingHammer ..........................................................................................$102 2009 TOKU CH-3H, Serial # 901074, ID # X090207, ChippingHammer ..........................................................................................$102
2004 TOKU TCD-30, Serial # 0L005, ID # 240149, 30# Clay Digger..........................................................................................................$204 2004 TOKU TCD-30, Serial # 2K044, ID # 240150, 30# ClayDigger ..............................................................................................$204
BROWN BEAR RC24, Serial # MS662, ID # MS662, R24 BrownBear compost turner..................................................................$10,222
2007 Multiquip G55H, Serial # ZC4800216, ID # X01765,Concrete Vibrator ............................................................................$307 2007 Wacker AR366042, Serial # 1597881, ID # 270014,Concrete Vibrator External Motor ..................................................$200 2007 Wacker AR366042, Serial # 1617181, ID # 270016,Concrete Vibrator External Motor ..................................................$200 2007 Wacker ARFU366115, Serial # 1832889, ID # 270921,Concrete Vibrator External Motor ..............................................$1,800
CATERPILLAR MISC ITEMS, Serial # 0000MS1015, ID #MS1015, 416 Control Kit ..............................................................$575
CATERPILLAR D6TCWT, Serial # D6CWTMS1516, ID # MS1516,D6T Counterweight ........................................................................$575
CATERPILLAR 302CPL, Serial # 302CPLCC598, ID # CC598, 302Manual PG Coupler........................................................................$288 2011 CATERPILLAR 307BRKT, Serial # 0WAB00100, ID # CC726,307C/308C Hyd Quick Coupler ....................................................$288 2005 CATERPILLAR 307CPLW, Serial # 0ATL00837, ID # 250843,307 Coupler ....................................................................................$575 2005 CATERPILLAR 307CPLW, Serial # 0ATL00886, ID # 251152,307 Coupler ....................................................................................$575 2005 CATERPILLAR 307CPLW, Serial # 0ATL00834, ID # 250841,307 Coupler ....................................................................................$358 2003 CATERPILLAR 307CPLW, Serial # 0ATL00477, ID # 231602,307 Coupler ....................................................................................$575 2007 CATERPILLAR 312CPL, Serial # 0MXA10166, ID # 270816,311/312 Coupler to 315 Linkage ..............................................$1,5002007 CATERPILLAR 312CPL, Serial # 0MXA10169, ID # 270818,311/312 Coupler to 315 Linkage ..............................................$1,5002007 CATERPILLAR 312CPL, Serial # 0MXA10168, ID # 270819,311/312 Coupler to 315 Linkage ..............................................$1,5002006 CATERPILLAR 312CPL, Serial # 0MXA10152, ID # 260454,311/312 Coupler to 315 Linkage ..............................................$1,5002006 CATERPILLAR 312CPL, Serial # 0MXA10151, ID # 260455,311/312 Coupler to 315 Linkage ..............................................$1,5002005 CATERPILLAR 312CPL, Serial # 0MXA10141, ID # 250509,311/312 Coupler to 315 Linkage ..................................................$575CATERPILLAR 312CPL, Serial # 608465A, ID # CC582, 311/312Coupler to 315 Linkage ..............................................................$1,500CATERPILLAR 314CPL, Serial # BBA10765, ID # C051799A1, 314coupler ............................................................................................$511CATERPILLAR 325CPL, Serial # 0PGA20510, ID # CU445, 325Coupler ............................................................................................$920
CATERPILLAR 325CPL, Serial # 0C1F10026, ID # CU207, 325Hyd PG Coupler, C Linkage, H&K Design....................................$920CATERPILLAR 325CPL, Serial # 0MXA10165, ID # CU146, 325Hyd PG Coupler, picks up D Linkage............................................$920CATERPILLAR 325CPL, Serial # 0GWK00102, ID # CU421, HydPG Coupler for 325C......................................................................$920CATERPILLAR 330CPL, Serial # U330CPLCU663, ID # CU663,330 Hydraulic coupler ................................................................$3,578CATERPILLAR 330CPL, Serial # 07XW00814, ID # CU382, CenterLock Coupler - DB Linkage ........................................................$1,725CATERPILLAR 345CPL, Serial # 07XW00642, ID # CU162, 345Dedicated CPLR-Does not fit regular buckets (Not TB or F)....$1,3802005 CATERPILLAR BHLDCDW, Serial # CC50200211, ID #250283, Pin Lock Coupler 416-430 E & D ..................................$173CATERPILLAR IT38CPL, Serial # CU427-IT38CPL, ID # CU427,Fusion Coupler for IT38H ..........................................................$1,725CATERPILLAR IT38CPL, Serial # UIT38CPLFA595, ID # FA595,IT38 COUPLER............................................................................$1,533CATERPILLAR IT38CPL, Serial # IT38CPL-MS884, ID # MS884,IT38H Coupler ............................................................................$1,725CATERPILLAR IT38CPLF, Serial # IT38CPLFMS1023, ID #MS1023, IT38H Fusion Coupler................................................$1,725CATERPILLAR IT38CPLF, Serial # 0G7W00104, ID # MS872,IT38H Fusion Coupler ................................................................$1,725GEITH INC 312CPL, Serial # 507867, ID # CC141, Geith The Clawmanual coupler for 315CL ............................................................$288 2001 HELAC CORPORATION 302CPL, Serial # T61053, ID #210704A, 302 Helac Coupler ....................................................$1,1502004 HELAC CORPORATION 304CPL, Serial # T73205, ID #240975A, 304C/305D Swivel Coupler ......................................$1,150HELAC CORPORATION PT07, Serial # T75518, ID # CC421, PT7Tilt Coupler for 420E or 430E ........................................................$920
2011 CAT D6N LGP, Serial # 0GHS00827, ID # 100641, 1967Hours, Dozer, Erops, A/C, Straight blade, draw bar ............$205,5002010 CAT D7E, Serial # 0MDB00141, ID # 090158, 1811 Hours,Dozer, Erops, A/C, SU blade, MS ripper ..............................$400,0002010 CAT D8T, Serial # 0KPZ03692, ID # 100151, 2508 Hours,Dozer, EROPS, A/C, SU blade, SS Ripper, UC @ 2508hrs avg. 60-80%, 24in shoes ....................................................................$433,5002009 CATERPILLAR D4K XL, Serial # 0MMM00430, ID #080925A, 1147 Hours, Dozer, Erops, A/C, PAT blade, drawbar,sweeps, UC @ 1147hrs 85-95% 18in shoes ........................$77,2001994 CATERPILLAR D5H LGP, Serial # 01DD06193, ID #UT12955, 17445 Hours, Dozer, Erops, A/C, PAT Blade, lever steering,Draw bar, UC @ 17445hrs avg. 40-65%, 34I’’shoes ............$18,4002011 CATERPILLAR D6K LGP, Serial # 0DHA01583, ID # 100638,2249 Hours, Dozer, Erops, A/C, Straight blade, drawbar ....$126,0002011 CATERPILLAR D6K LGP, Serial # 0DHA01377, ID # 110023,1190 Hours, Dozer, Erops, A/C , PAT blade, drawbar UC @ 1185hrs70-85%, 30in shoes ..............................................................$132,0002011 CATERPILLAR D6K LGP, Serial # 0DHA01502, ID # 100851,1873 Hours, Dozer, Erops, A/C, straight blade accugrade ready ..........................................................................................................$123,9002011 CATERPILLAR D6N LGP, Serial # 0GHS00538, ID # 1010021709 Hours, Dozer, Cab, A/C ................................................$189,1112008 CATERPILLAR D6N XL, Serial # 0DJA01026, ID # 080354,2117 Hours, Dozer, Erops, PAT blade, aux. hyd., accugrade ready ......................................................................................................$169,0002011 CATERPILLAR D6T XL, Serial # 0GMK00101, ID # 100980,869 Hours, Dozer, EROPS, A/C, SU blade, Drawbar ..........$270,0002011 CATERPILLAR D6T XL, Serial # 0GMK00255, ID # 111448,207 Hours, Dozer, Erops, A/C, 24in shoes ..........................$290,0002011 CATERPILLAR D6T XL, Serial # 0GMK00161, ID # 100979,931 Hours, Dozer, Erops, A/C, 24in shoes ..........................$288,9002011 CATERPILLAR D6T XL, Serial # 0GMK00342, ID # 110245,143 Hours, Dozer, Erops, A/C, sweeps, Winch, SU Blade, UC @143hrs 99%............................................................................$312,0002011 CATERPILLAR D6T XL, Serial # 0GMK00339, ID # 110246,550 Hours, Dozer, Erops, A/C, 24in shoes ..........................$305,9002011 CATERPILLAR D6T XL, Serial # 0GMK00142, ID # 110441,639 Hours, Dozer, Erops, A/C, 24in shoes ..........................$305,9002010 CATERPILLAR D6T XL, Serial # 0LAY01570, ID # 100404,667 Hours, Dozer, Erops, A/C , SU blade, Winch, sweeps..$283,5002011 CATERPILLAR D6T XL R, Serial # 0GMK00108, ID #110305, 947 Hours, Dozer, Erops, A/C, SU blade, MS ripper, uc @947hrs avg. 85-90%, 24in shoes ........................................$278,900
2010 CATERPILLAR D6T XL W, Serial # 0LAY01555, ID #100157, 1045 Hours, Dozer, Cab, A/C, Straigh blade, NO Winch, UC@ 1045hrs 85-95% ..............................................................$250,4442010 CATERPILLAR D6T XL W, Serial # 0LAY01566, ID #100156, 1473 Hours, Dozer, Cab, A/C, SU Blade, NO Winch, UC @1449hrs 98%..........................................................................$250,4442011 CATERPILLAR D6T XW, Serial # 0SLJ00148, ID # 110082,242 Hours, Dozer, Erops, A/C, SU blade..............................$305,9002011 CATERPILLAR D6T XW, Serial # 0SLJ00149, ID # 110083,350 Hours, Dozer, Erops, A/C, SU blade..............................$305,9002011 CATERPILLAR D6T XW, Serial # 0SLJ00170, ID # 110235,648 Hours, Dozer, Erops, A/C, 24In shoes ..........................$289,9002011 CATERPILLAR D6T XW, Serial # 0SLJ00147, ID # 110081,388 Hours, Dozer, Erops, A/C, 24In shoes ..........................$305,9002010 CATERPILLAR D7R, Serial # 0AEC02369, ID # 090333, 1818Hours, Dozer, Erops, A/C, SU Blade, MS ripper, UC @ 1818hrs 90-95%, 24in shoes ....................................................................$400,0001971 CATERPILLAR D8H, Serial # 046A25694, ID # UT12605,3611 Hours, Dozer, NO Blade, Scraper tractor, OROPS, split scraperwinch, drawbar, no blade hyd, UC @ 3611hrs 40-60%........$10,2221971 CATERPILLAR D8H, Serial # 046A25076, ID # UT12587,3995 Hours, Dozer, NO Blade, Scraper tractor, OROPS, split scraperwinch, drawbar, no blade hyd. 3995HRS 70-99%, 24” Shoes 99%, ......................................................................................................$10,2221971 CATERPILLAR D8H, Serial # 046A25072, ID # UT12585,5890 Hours, Dozer, NO Blade, Scraper tractor, OROPS, split scraperwinch, UC @ 5890HRS, 24” shoes @ 99%, bushings 85%, links40%, seg. 85%, idler 60%, rollers..........................................$10,2222011 CATERPILLAR D8T, Serial # 0KPZ03827, ID # 100924, 1965Hours, Dozer, Erops, A/C, 24in shoes, SU Blade ................$455,9002010 CATERPILLAR D8T W, Serial # 0KPZ03717, ID # 100241,2176 Hours, Dozer, Cab, A/C ................................................$383,333
CATERPILLAR D8DRWBAR, Serial # UD8RDRWBARCT85, ID #CT85, D8R DRAWBAR ASSMBLY ................................................$767
2004 GME TRENCH PROTECTI END PANEL, Serial #M04081559, ID # 241179, End panel - Pit kit style end ............$307 2004 GME TRENCH PROTECTI END PANEL, Serial #M04081560, ID # 241180 1 Hours, End panel - Pit kit style end$307 2004 GME TRENCH PROTECTI END PANEL, Serial #M04081561, ID # 241181, End panel - Pit kit style end ............$307 2004 GME TRENCH PROTECTI END PANEL, Serial #M04081656, ID # 241183, End panel - Pit kit style end ............$307
2009 CAT 321DLCR, Serial # 0NAS00345, ID # 080560, 4224Hours, Exc, EROPS, A/C, Aux. Hyd., Quick coupler, UC @ 4209hrs80-99%, 31in shoes ..............................................................$125,0002008 CAT 321DLCR, Serial # 0NAS00170, ID # 071169A, 3966Hours, Exc, Erops, A/C, Aux. Hyd., Quick coupler, 36in bkt., UC @3966hrs avg 70-80%, 31in shoes ........................................$119,9002008 CAT 325DL, Serial # 0A3R01045, ID # 070823, 3571 Hours,Exc, Erops, A/C, Aux. hyd., Quick coupler, 31.5in shoes....$133,5002009 CAT 329DL, Serial # 0JHJ00317, ID # 081069, 2728 Hours,Exc, Erops, A/C, Aux Hyd, Quick coupler, travel straight pedal, patternchanger, plumbed to stick for hammer, 32in shoes ............$200,0002008 CAT 330DL T, Serial # 0MWP02801, ID # 071158, 5267Hours, Exc, Erops, A/C, Aux. Hyd., Quick coupler, hyd. Thumb. UC@ 5243hrs avg 60-85%, 21in shoes. ..................................$155,6001989 CATERPILLAR 225B, Serial # 02ZD01798, ID # UT12935,12871 Hours, Excavator, Cab, Bkt, Long Stick, UC @ 12871HRS 50-70%, 30IN Triple Grouser 70% ..............................................$14,3112011 CATERPILLAR 312DL, Serial # 0XGK00230, ID # 100727,947 Hours, Exc, Cab, A/C, Aux. Hyd., Plumber to stick for coupler ....................................................................................................$120,0002005 CATERPILLAR 314CCR, Serial # 0KJA00159, ID #UP12724, 125 Hours, Excavator, Cab, A/C, 42in Bucket, levelingBlade, UC @ 4982hrs 50-75% ..............................................$53,1562011 CATERPILLAR 320DL, Serial # 0SPN00504, ID # 100734,1712 Hours, Exc, Cab, A/C, Coupler, 31” TG with guarding$150,0002011 CATERPILLAR 320DL, Serial # 0SPN00505, ID # 100733,1748 Hours, Exc, Cab, A/C, Aux, Hyd., Quick coupler, 1 piece boom,UC @ 1748hrs 80-85%, 31in shoes....................................$150,0002010 CATERPILLAR 320DL, Serial # 0PHX02671, ID # 100752,2016 Hours, Exc, Cab, A/C, Aux. Hyd., Combined function Hyd. ........................................................................................................$130,000
2009 CATERPILLAR 321DLCR, Serial # 0NAS00409, ID #080805, 3315 Hours, Exc, Cab, A/C, Aux, Hyd., Quick coupler,Plumbed to stick for hammer, 1 piece boom, UC @ 3307hrs 85-95%, 31in shoes ....................................................................$135,0002008 CATERPILLAR 330DL, Serial # 0MWP03161, ID # 080075,4252 Hours, Exc, Cab, A/C, Aux, Hyd., Quick coupler, Plumbed tostick for hammer, 1 piece boom, UC @ 4252hrs 80-90%, 31.5inshoes ......................................................................................$160,0002007 CATERPILLAR 345CL, Serial # 0PJW01759, ID # 060678,9095 Hours, Excavator, Cab, A/C ............................................$94,0442011 CATERPILLAR 345DL, Serial # 0EEH01027, ID # 110330,1817 Hours, Exc, Cab, A/C, Aux, Hyd., 12st 10in stick ......$330,0002011 CATERPILLAR 345DL, Serial # 0EEH01028, ID # 110331,1665 Hours, Exc, Cab, A/C, 1 piece boom, UC @ 1665hrs 95-99%..................................................................................................$335,0002008 CATERPILLAR M316D, Serial # 0W6A00711, ID # 071135,3019 Hours, Excavator, Cab, A/C, aux. hyd., 8’6” stick..........$86,889
CATERPILLAR MISC ITEMS, Serial # 208-5116MS1254, ID #MS1254, 740 Exhaust Piping........................................................$920CATERPILLAR MISC ITEMS, Serial # 208-5116MS1255, ID #MS1255, 740 Exhaust Piping........................................................$920CATERPILLAR MISC ITEMS, Serial # 208-5116MS1259, ID #MS1259, 740 Exhaust Piping........................................................$920CATERPILLAR MISC ITEMS, Serial # 208-5116MS1260, ID #MS1260, 740 Exhaust Piping........................................................$920
CATERPILLAR 938FRKS, Serial # U938FRKSFA696, ID # FA696,938 48in forks..............................................................................$2,556CATERPILLAR 938FRKS, Serial # U938FRKSFA593, ID # FA593,938 96in forks..............................................................................$2,556CATERPILLAR 938FRKS, Serial # 07PW03123, ID # FA409, 96”Forks ............................................................................................$1,725CATERPILLAR 938FRKS, Serial # FA498-938FRKS, ID # FA498,Bobcat Pin on 60” Forks for CAT 938........................................$1,725CATERPILLAR 950GP, Serial # 0B1E05000, ID # FB709, IT 54”Forks ............................................................................................$5,175CATERPILLAR CWLF48, Serial # 65SSXX000478, ID # CF502,904 48” Forks..................................................................................$690CATERPILLAR CWLF48, Serial # CWLF48CF115, ID # CF115, 90648” Forks ........................................................................................$690CATERPILLAR IT62F60, Serial # FA485ITF60, ID # FA485, 60”Forks ............................................................................................$1,725CATERPILLAR IT62F60, Serial # IT6260FFA353, ID # FA353, PalletForks ............................................................................................$1,725CATERPILLAR IT62FRKS, Serial # C053052A4-FORK, ID #C053052A4, IT 62H Forks..........................................................$1,725CATERPILLAR ITF60, Serial # ITF60F-FA526, ID # FA526, 60”Fusion Forks................................................................................$1,725CATERPILLAR ITF72, Serial # 0B1H04209, ID # FA566, 72” FusionForks ............................................................................................$1,725CATERPILLAR ITF72, Serial # 0B1H04466, ID # FA636, 72” FusionForks ............................................................................................$1,725CATERPILLAR ITFPIPE, Serial # 0AKR15291, ID # FA572, 72”Pipe Forks for IT38H Fusion Coupler......................................$14,375CATERPILLAR SSFU72, Serial # SSFU72, ID # CF17, SSL 72”Utility Forks......................................................................................$460MISCELLANEOUS OTHER THF48, Serial # SSF48CF150, ID #CF150, DO NOT FIT CAT MACHINES - SSL off brand forks ..$1,329ROCKLAND INC ITFCLAMP, Serial # R18115, ID # C053087A1,IT28 Logging Forks - Top Middle Tine........................................$4,025ROCKLAND INC PG-2, Serial # R58785, ID # FA444, Rockland PG-2Pipe Grapple Forks....................................................................$14,375
2010 CATERPILLAR GP5600A, Serial # 5893040, ID # X100031,1 Hours, 5.6 KW Generator ........................................................$1,2002001 SULLAIR 375CFM, Serial # 004-135169, ID # ERAA0014,3150 Hours, Generator, 375CFM, 150M max PSI, 4410 lbs weight,48 gallon gal. fuel tank, 6.1 gpu fuel use, surge brakes, pintel hitch,louvers on after cooler ..............................................................$12,7782011 WACKER GP5600A, Serial # 20030114, ID # X110308, 5.6KW WACKER GENERATOR W/HONDA GAS,WHEEL KIT,ELEC START......................................................................................................$1,3292011 WACKER GP5600A, Serial # 20030113, ID # X110310, 5.6KW WACKER GENERATOR W/HONDA GAS,WHEEL KIT,ELEC START......................................................................................................$1,329
CAB
CAB ASSEMBLY
CABLE
CHIPPING HAMMERS
CLAY DIGGERS
COMPOST TURNER
CONCRETE VIBRATORS
CONTROL KIT
COUNTER WEIGHT
COUPLERS
DOZERS
EXCAVATORS
END PANELS
DRAWBAR ASSEMBLY
EXHAUST PIPING
FORKS
GENERATORS
2006 CATERPILLAR 312CPL, SN# 0MXA10152, ID# 260454311/312 Coupler to 315 Linkage ..................................................$1,500
2001 SULLAIR 375CFM, SN# 004-135169, ID# ERAA0014,Generator, 375CFM, 150M max PSI, 4410 lbs weight, 48 gallon gal.fuel tank, 6.1 gpu fuel use, surge brakes, pintel hitch, louvers on aftercooler, 3150 Hrs ............................................................................$12,778
www.clevelandbrothers.com 866-532-9023 Email: smasisak@clevelandbrothers.com
Low-Hour Rental Fleet Roll Out
866-532-9023www.clevelandbrothers.com
Email: smasisak@clevelandbrothers.comEquipment Located In Pennsylvania, & West Virginia
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 19
2010 Wacker GP5600A, Serial # 5892206, ID # X100114, 5.6 KWGenerator......................................................................................$1,2002010 Wacker GP5600A, Serial # 5929589, ID # X100340, 5.6 KWGenerator......................................................................................$1,200
2002 NPK INC E205, Serial # 72740, ID # A22036, E205 Hammer......................................................................................................$3,0672002 NPK INC E205, Serial # 72742, ID # A22037, E205 Hammerw/’C’Bracket, Hyd. Quick disconnects, no heads ......................$3,067
CATERPILLAR MISC ITEMS, Serial # 113-2677MS483, ID #MS483, IT Blank Hooks w/Pintle Hitch ........................................$920
2008 Allmand Brothers Night-Lite, Serial # 1737PRO08, ID #X080088, 4397 Hours, Light Plant ............................................$3,8002008 Allmand Brothers Night-Lite, Serial # 1738PRO08, ID #X080087, 3722 Hours, Light Plant ............................................$3,900
CATERPILLAR ITMH, Serial # ITMH00MS1007, ID # MS1007,IT38H Material Handling Arm ....................................................$1,725
GOMACO MISC ITEMS, Serial # MISC-MS1137, ID # MS1137,(2) 4’ FRAME EXTENSIONS, (3) 12’ SPANIT INSERTS, (2) 3’ SPANITINSERTS ......................................................................................$5,175
2009 CATERPILLAR 120M, Serial # 0D9W00128, ID # 100194,913 Hours, Motor Grader, Cab, A/C, tires @ 913hrs 95% $184,000
2011 CATERPILLAR 247B, Serial # 0TSL00729, ID # 110088, 515Hours, MTL, Cab, A/C, UC @ 359hrs, 15in rubber tracks 80%..............................................................................................................$29,0002005 CATERPILLAR 247B, Serial # 0MTL02391, ID # UP12463,1193 Hours, MTL, Canopy, 74in Bucket, UC @ 1193HRS 80% ............................................................................................................$19,4222005 CATERPILLAR 257B, Serial # 0SLK03397, ID # UT13001,2957 Hours, MTL, Cab, Tier II Engine, 2 Speed Travel, High flow, Eleconn for implements, 14.5IN tracks 50% @ 2808HRS ........$15,333
CATERPILLAR MISC ITEMS, Serial # MISCITEMS-MS838, ID #MS838, Two 30’ Onboard levelers ................................................$920
Brown Bear SC3610, Serial # SC36B015, ID # MS215, PaddleAerator........................................................................................$17,250Brown Bear SC3610, Serial # SC36B-016, ID # MS216, PaddleAerator........................................................................................$17,250
2003 CATERPILLAR AP650B, Serial # 09DN00513, ID #UT12861, 6951 Hours, Paver, Tier II engine ..........................$51,1112007 CATERPILLAR CB534D XW, Serial # 0EAA00571, ID #UP12180, 3361 Hours, Paver, ROPS/FOPS/CANOPY, Tier I engine,Standard nozzles, Versa Vibe system, cocoa mats, off set hitch, 783/4” solid drum ........................................................................$54,1782007 CATERPILLAR CB534D XW, Serial # 0EAA00590, ID #UP12179, 3283 Hours, Paver, ROPS/FOPS/CANOPY, Tier I engine,Standard nozzles, Versa Vibe system, mats, off set hitch, 78 3/4” soliddrum ..........................................................................................$54,1782005 CATERPILLAR CB534D XW, Serial # 0EAA00370, ID #UP11570N, 2855 Hours, Paver, ROPS/Platform, working lights, hitch,Versa vibe system, high intensity lights ..................................$56,222
2007 SULLAIR MPB-35C, Serial # 0240127P, ID # X01758, 35LBPaving Breaker ................................................................................$228 2007 SULLAIR MPB-35C, Serial # 0240657P, ID # X01759, 35LBPaving Breaker ................................................................................$228 2004 SULLAIR MPB-90AF, Serial # 0680554, ID # X00660, 1Hours, 90LB Paving Breaker..........................................................$342 2010 TOKU TPB-90, Serial # 10A030, ID # X100077, 90#Pavement Breaker ..........................................................................$307
2010 TOKU TPB-90, Serial # 10A055, ID # X100078, 90#Pavement Breaker ..........................................................................$307 2010 TOKU TPB-90, Serial # 10A015, ID # X100081, 90#Pavement Breaker ..........................................................................$307 2010 TOKU TPB-90, Serial # 10A001, ID # X100083, 90#Pavement Breaker............................................................................$307
2008 CATERPILLAR LR15B, Serial # 0EFS00427, ID # LR98, SSLLandscape Rake ..........................................................................$4,0252007 CATERPILLAR LR15B, Serial # 0EFS00401, ID # LR51, SSLLandscape Rake ..........................................................................$4,025ROCKLAND INC BR10, Serial # R56795B, ID # MS847, BR BladeRake for D4G XL..........................................................................$2,875TORO / DINGO TDGPLB, Serial # 270000177, ID # GA51, ToroDingo Grapple Rake........................................................................$920
1999 Rammax RW1404-33, Serial # 325864, ID # R99047, 2325Hours, Remote Roller ..................................................................$4,000
2005 Vermeer RT450, Serial # 818, ID # 250892, 759 Hours, RideOn Trencher ..............................................................................$13,000
CATERPILLAR 777TIRES, Serial # U777TIRESMS1024, ID #MS1024, (4) 24.00-49 777B Mode type, RIMS ONLY
WERK-BRAU 325RIP, Serial # WBRT3-325DRIP, ID # RR111, 30”Frost Ripper..................................................................................$1,725
2000 AMERICAN PNEUMATIC RB-133, Serial # 294739, ID #200568, Rivet Buster ......................................................................$150
2002 SULLAIR MRD55, Serial # 02250094-9, ID # ERDD0001,Rock Drill ........................................................................................$358 2008 TAMCO THB-110N, Serial # 804069, ID # X080496, 15#Rock Drill ........................................................................................$256 2008 TAMCO THB-110N, Serial # 804057, ID # X080497, 15#Rock Drill ........................................................................................$256 2008 TAMCO THB-110N, Serial # 804019, ID # X080498, 15#Rock Drill ........................................................................................$256 2007 TAMCO THB-110N, Serial # 701036, ID # 270858, 15# RockDrill ..................................................................................................$204 2007 TAMCO THB-110N, Serial # 701021, ID # 270859, 15# RockDrill ..................................................................................................$256 2007 TAMCO THB-110N, Serial # 701016, ID # 270860, 15# RockDrill ..................................................................................................$256 1999 TOKU RD-115, Serial # 254202, ID # 99019, 23# Rock Drill............................................................................................................$102 2001 TOKU RD-137, Serial # 0935M137, ID # 210241, 45# RockDrill ..................................................................................................$153 2007 TOKU RD-7, Serial # 5L015, ID # 270282, 8# Rock Drill$204 2007 TOKU RD-7, Serial # 4D022, ID # 270284, 8# Rock Drill$204 2007 TOKU RD-7, Serial # 4L033, ID # 270285, 8# Rock Drill$204 2004 TOKU THD-1100U, Serial # 307015, ID # 240152, 15# RockDrill ..................................................................................................$256
2005 CAT CB534D XW, Serial # 0EAA00387, ID # 070914, 1320Hours, Roller, 2 Drum, Canopy, Operator Station, Spray System,Vibratory ....................................................................................$55,9002011 CAT CP56, Serial # 0C5P00523, ID # 100570, 867 Hours,Roller, Cab, A/C ......................................................................$127,8002011 CAT CP56, Serial # 0C5P00521, ID # 100572, 812 Hours,Roller, Cab, A/C ......................................................................$127,8002010 CAT CP56, Serial # 0C5P00505, ID # 100057, 2141 Hours,Roller, Cab, A/C, Pad foot, leveling blade ............................$113,5002010 CAT CP56, Serial # 0C5P00464, ID # 090342, 1335 Hours,Roller, Cab, A/C, Pad foot, leveling blade ............................$120,0002010 CAT CS323C, Serial # 0DAR00466, ID # 090282, 216 Hours,Roller, OROPS, Canopy, smooth drum, tires @ 215hrs 95-99% ............................................................................................................$55,5002008 CAT CS433E, Serial # 0ASR01012, ID # 080023, 776 Hours,Roller, OROPS, Vibratory, Canopy, smooth drum, tires @ 775hrs90% ..........................................................................................$55,500
2006 CATERPILLAR CB114, Serial # 0C2Z00192, ID # 050322,420 Hours, Roller, Hand rail, back up alarm, lights................$14,5002008 CATERPILLAR CB14, Serial # 0DST00262, ID # 080264A,325 Hours, Roller, ROPS, Lights, water spray ........................$17,5002007 CATERPILLAR CB534D, Serial # 0FGH00746, ID # 080519,2000 Hours, Roller, ROPS/FOPS, Versa Vibe system, Hitch, Waterdistribution system....................................................................$60,0002007 CATERPILLAR CB564, Serial # 0C6D00149, ID # 080480,1622 Hours, Roller, ROPS/FOPS, Versa Vibe system, Hitch, Waterdistribution system....................................................................$66,4442011 CATERPILLAR CP56, Serial # 0C5P00527, ID # 100571,669 Hours, Roller, Erops, A/C, Leveling blade, Vibratory, Pad foot,tires @ 669hrs 97% ..............................................................$132,0002011 CATERPILLAR CP56, Serial # 0C5P00584, ID # 101032,972 Hours, Roller, Erops, A/C, Leveling blade, Vibratory, Pad foot ......................................................................................................$127,8002011 CATERPILLAR CS56, Serial # 0C5S01185, ID # 100568, 995Hours, Roller, Erops, A/C, Smooth drum, Tires @ 995hrs new............................................................................................................$123,0002010 CATERPILLAR CS56, Serial # 0C5S01151, ID # 100408,1618 Hours, Roller ................................................................$112,4442010 CATERPILLAR CS56, Serial # 0C5S01182, ID # 100563, 484Hours, Roller, Erops, A/C ......................................................$123,0002004 MMD PP80, Serial # VHS1-50151, ID # 250938, Art VibRoller, 24” smooth drum ............................................................$3,200
1972 CATERPILLAR 613, Serial # 071M00954, ID # UT12630,1104 Hours, Scarper, OROPS, Paddle tires @ 1102HRS RF 20%, LF95% Rears 25%........................................................................$10,2221972 CATERPILLAR 613, Serial # 071M01282, ID # UT12629,2150 Hours, Scraper, OROPS, TIRES @ 25%, NEW FLIGHT CHAINS....................................................................................................$10,222
TORO / DINGO TDSC, Serial # 260000109, ID # MS487, ToroDingo Soil Cultivator ..................................................................$1,725
GME TRENCH PROTECTI GMEA2844, Serial # A28443, ID #X00974, 28” - 44” Adjustable Spreader Bars - GME Aluminum$307GME TRENCH PROTECTI GMEBAR24, Serial # GMEBAR24TB36,ID # TB36, 8” X 24” Spreader bar set ..........................................$307GME TRENCH PROTECTI GMEBAR24, Serial # D8851A, ID #X01393A, 8” X 24” Spreader bar set............................................$307GME TRENCH PROTECTI GMEBAR24, Serial # D8852, ID #X01394, 8” X 24” Spreader bar set ..............................................$307GME TRENCH PROTECTI GMEBAR24, Serial # D8853, ID #X01395, 8” X 24” Spreader bar set ..............................................$307GME TRENCH PROTECTI GMEBAR24, Serial # 260592, ID #260592, 24” Spreader set 4 - GME Trench box............................$307GME TRENCH PROTECTI GMEBAR36, Serial # TB50, ID # TB50,PRO-TEC set OF 36” Spreader Bars..............................................$307GME TRENCH PROTECTI GMEBAR72, Serial # GMEBAR72, ID #MS465, 72” Spreader pipe for manhole shields of 4 ..................$307GME TRENCH PROTECTI GMEBAR72, Serial # 8DS72X02105A,ID # X02105A, 72” Spreader pipe for manhole shields of 4........$307KUNDEL KUNADJBAR, Serial # KUNAJDX01960A, ID # X01960A,6” - 24” ADJUSTABLE Spreader Bars 3” - A STYLE 290 LBS....$102KUNDEL KUNADJBAR, Serial # 270833, ID # 270833, 6” - 24”ADJUSTABLE Spreader Bars 4” - B STYLE 150 LBS..................$102KUNDEL KUNADJBAR, Serial # 270769, ID # 270769, 6” - 24”ADJUSTABLE Spreader Bars 6” - C STYLE 290 LBS..................$102KUNDEL KUNADJBAR, Serial # 270838, ID # 270838, 6” 24”ADJUSTABLE Spreader Bars 6” C STYLE 290 LBS ....................$102KUNDEL KUNADJBAR, Serial # 270834, ID # 270834, 6” 24”ADJUSTABLE Spreader Bars 4” B STYLE 150 LBS ....................$102KUNDEL KUNADJBAR, Serial # KUNAJDX01961, ID # X01961, 6”24” ADJUSTABLE Spreader Bars 6” C STYLE 290 LBS..............$102KUNDEL KUNADJBAR, Serial # 270841, ID # 270841, 6” 24”ADJUSTALE Spreader Bars 6” C STYLE ......................................$102KUNDEL KUNBAR24, Serial # KUNBAR24X01954, ID # X01954,24” Spreader BAR (SET OF 4) 6” A-STYLE..................................$102
KUNDEL KUNSPC, Serial # TB12, ID # TB12, Stacking plates forTitan 3/SET4 ......................................................................................$77KUNDEL KUNSPC, Serial # TB09, ID # TB09, Stacking plates forTitan 5/SET4 ......................................................................................$77KUNDEL KUNSPC, Serial # TB10, ID # TB10, Stacking plates forTitan 5/SET4 ......................................................................................$77
CATERPILLAR 307STK, Serial # C063820A1, ID # C063820A1,307C Stick....................................................................................$1,725CATERPILLAR 307STK, Serial # C063821A1, ID # C063821A1,307C Stick....................................................................................$1,725CATERPILLAR 312STK, Serial # C980258A1-8-2-STICK, ID #C980258A1, 8’2” 312 unit..............................................................$575CATERPILLAR 320STK, Serial # U320STKMS767, ID # MS767,320 stick - Part #4I6555 ................................................................$511CATERPILLAR 330STK, Serial # 1LL23914, ID # MS234, 330DL10’6” Stick....................................................................................$5,175CATERPILLAR 365STK, Serial # U365STKMS1324, ID # MS1324,365 Stick, 13’ 6”“ ........................................................................$6,133CATERPILLAR 375STK, Serial # C976773A2-9-7- STICK, ID #C976773A2, 9’7” Stick - J Family Bucket Linkage ..................$9,775
CATERPILLAR SG16B, Serial # 0MAP00679, ID # SG14, SSLStump Grinder ............................................................................$4,025
CATERPILLAR MISC ITEMS, Serial # UD6TSWEEPSMS1471, ID #MS1471, D6T SWEEPS..............................................................$3,884
CATERPILLAR 307BRKT, Serial # 264-5907BRK671, ID # BRK671,307D/308D Swivel Plate - Still need bracket H70-H90, CVP40 $288CATERPILLAR 307BRKT, Serial # 264-5907BRK691, ID # BRK691,307D/308D Swivel Plate - Still need bracket H70-H90, CVP41 $288
MISCELLANEOUS OTHER 740GATE, Serial # 740GATEMS967, ID# MS967, 740 Rumble Gate ......................................................$7,475
2004 CATERPILLAR TH560B, Serial # 0SLG00694, ID # UT127473729 Hours, Telehandler, 4 Wheel drive, 3 Piece boom, Front coupler,Forks, Front Elec. Hook up, Tires @ 3729HRS @ 0%..........$43,9562003 CATERPILLAR TH560B, Serial # 0SLG00314, ID #UT12746, 4170 Hours, Telehandler, 4 Wheel drive, 3 Piece boom,Front coupler, Forks, Front Elec. Hook up, Tires @ 4170hrs 0-20% ......................................................................................................$40,8892008 JLG INDUSTRIES INC TL1055, Serial # TBM01018, ID #X080390, 2774 Hours, Telehandler ........................................$49,0672007 JLG INDUSTRIES INC TL1055, Serial # TBM00472, ID #UP11729N, 3854 Hours, Telehandler, All wheel drive, Forks, Tires @50% ..........................................................................................$47,0222007 JLG INDUSTRIES INC TL1255, Serial # TBN00171, ID #UP12165, 4508 Hours, Telehandler, 55’ Lift height, 48” Forks, 4 Maststages, 12000lbs max lift capacity, 17.5-25 Tires @ 4320HRS, Fronts99%, RR 70%, LR 50% ..........................................................$53,1562007 JLG INDUSTRIES INC TL642, Serial # TBK00114, ID #X01448, 4075 Hours, Telehandler, Single joystick, w./ rocker, ROPS,Cab, Aux. Hyd., 4-Speed power shift, planetary drive axle, 4 wheeldrive, wet disc service brakes ..................................................$33,733
CATERPILLAR 318TH, Serial # 318TH-T141, ID # T141, HydThumb..........................................................................................$1,725CATERPILLAR 320TH, Serial # 0PMZ01227, ID # T14, 320 thumb..........................................................................................................$511CATERPILLAR BHLT, Serial # 00BT00340, ID # BT340, BHL ThumbTine B1 Only....................................................................................$575 2003 WERK-BRAU BHLT, Serial # 9695504, ID # 230059, BHLThumb..............................................................................................$575
CATERPILLAR MISC ITEMS, Serial # M318DMHWHEELS, ID #MS831, M318D MH Solid Tires w/Rims..................................$4,600CATERPILLAR 769TIRES, Serial # U769TIRESCT52, ID # CT52,769 (7) QTY 1800.33 tires..........................................................$5,111CATERPILLAR MISC ITEMS, Serial # 249-7841MS1168, ID #MS1168, 17.5R25 BS Tires........................................................$2,300
CATERPILLAR MISC ITEMS, Serial # 00MS01034, ID # MS1034,257B2 Set of slightly used tracks ..................................................$575
2007 Mult iquip QP4TH, Serial # 4TH-1010, ID # 270126, 4” TrashPump ..............................................................................................$613 2011 WACKER PT2A, Serial # 20026982, ID # X110304, 2” TrashPump ..............................................................................................$511 2011 WACKER PT2A, Serial # 20026983, ID # X110305, 2” TrashPump ..............................................................................................$511 2011 WACKER PT2A, Serial # 20026984, ID # X110306, 2” TrashPump ..............................................................................................$511 2011 Wacker PT2A, Serial # 20018198, ID # X110300, 2” TrashPump ..............................................................................................$825 2011 Wacker PT2A, Serial # 20026979, ID # X110302, 2” TrashPump ..............................................................................................$825 2011 WACKER PT3A, Serial # 20027091, ID # X110297, 3” TrashPump................................................................................................$613
1900 BROWN BEAR BC283, Serial # BC283-011, ID # BRB01,Tree shredder for HF Skid steer.- 4.14 CI 36” wide motor 4200PSI ........................................................................................................$10,2221900 BROWN BEAR BC283, Serial # BC283-012, ID # BRB03,Tree shredder for HF Skid steer.- 4.14 CI 36” wide motor 4200PSI ........................................................................................................$10,2221900 BROWN BEAR BC283, Serial # BC283-013, ID # BRB06,Tree shredder for HF Skid steer.- 4.14 CI 36” wide motor 4200PSI ..........................................................................................................$10,22
GME TRENCH PROTECTI GMEBAR32, Serial # 240455, ID #240455, 32”“X50” Spreader set 4 GME Aluminum trench boxes 136LBS ..................................................................................................$307 2006 KUNDEL KUN4X10, Serial # 13571, ID # 270793, 4X10Stacking box -4X10 no knife - B Old style - 2000 LBS............$2,5562006 KUNDEL KUN4X10, Serial # 13594, ID # 270891, 4X10Stacking- no knife - 6” C Old style - 3400 LBS........................$2,5562006 KUNDEL KUN4X10, Serial # 13593, ID # 270792, 4X10TITAN 5 RAP-O-ROUND Stacker 6” C Old style - 3400 LBS ..$2,5562006 KUNDEL KUN4X10, Serial # 13595, ID # X01938, 4X10TITAN 5 RAP-O-ROUND Stacker 6” C Old style - 3400 LBS ..$2,5562007 KUNDEL KUN4X8, Serial # 13519, ID # X01944, 4X8 TITAN5 RAP-O-ROUND Stacker 6” - C STYLE ..................................$2,556
2001 RAMMAX P3324HHMR, Serial # 332303, ID # 210873, 597Hours, 33” Drum Trench Roller..................................................$1,227
2010 PARTNER/HUSQVARNA K970 CART, Serial #20102500043, ID # X100513, HUSQVARNA K970 Trolly cart withwater kit............................................................................................$153 2010 PARTNER/HUSQVARNA K970 CART, Serial #20102500028, ID # X100516, HUSQVARNA K970 TROLLY CART W/WATER KIT ......................................................................................$153
2005 Vermee r RT200, Serial # 1VRX081F751000692, ID #250375, 195 Hours, Walk Behind Trencher ..............................$5,000
CATERPILLAR MISC ITEMS, Serial # MS678WATERTANK, ID #MS678, B Series Water Tank..........................................................$460
1978 CATERPILLAR 769C WW, Serial # 001X00583, ID #UP12537, 4951 Hours, Truck, Cab, A/C, Rigid frame, Retarder, 8000Gal. water tank, Tires @ 4915HRS, RF 47%, LF 74%, Rears74% ..........................................................................................................$22,489
2010 CAT 930H, Serial # 0DHC01866, ID # 100161, 755 Hours,WHL, Erops, A/C, Standard front, Tires @ 755hrs avg 92%................................................................................................................$140,0002010 CATERPILLAR 924H, Serial # 0HXC01817, ID # 100579,3385 Hours, Whl Loader, Erops, A/C, Standard front, Wheel steering....................................................................................................$92,0002010 CATERPILLAR 930H, Serial # 0DHC01845, ID # 100440,464 Hours, Wheel Loader ......................................................$143,1112010 CATERPILLAR 930H, Serial # 0DHC02139, ID # 100580,1584 Hours, Wheel Loader, Erops, A/C, Quick coupler ......$127,7782010 CATERPILLAR 930H, Serial # 0DHC01764, ID # 100055,716 Hours, Whl Loader, Erops, A/C, Standard front, Wheel steering,Tires @ 687hrs 93%..............................................................$141,067
CATERPILLAR MISC ITEMS, Serial # 9900079, ID # C980758A6,D3C 30B Winch ..........................................................................$5,750
PAVING BREAKERS
RAKES
LIGHT PLANTS
MATERIAL HANDLING ARM
MISC ATTACHMENT
MOTOR GRADER
MULTI TERRAIN LOADERS
ROCK DRILLS
RIVET BUSTER
RIPPER
RIMS
RIDE ON TRENCHER
REMOTE ROLLER
PAVERS
PADDLE AERATORS
ONBOARD LEVELER
ROLLERS
SCRAPERS
SPREAD BARS
STUMP GRINDER
SWEEPS
SWIVEL BRACKETS
TAIL GATE
TELEHANDLERS
THUMBS
TRACKS
TRASH PUMPS
TREE SHREDDER
TIRES
SOIL CULTIVATOR
WINCH
WHEEL LOADERS
WATER TRUCK
WATER TANK
WALK BEHIND TRENCHER
TROLLY CARTS
TRENCH ROLLER
TRENCH BOXES
HAMMERS
IT BLANK
STACKING PLATES
STICKS
2002 NPK INC E205, SN# 72742, ID# A22037, E205 Hammerw/’C’Bracket, Hyd. Quick disconnects, no heads ..........................$3,067
2010 CAT CS323C, SN# 0DAR00466, ID# 090282, Roller, OROPS,Canopy, smooth drum, tires @ 215hrs 95-99%” 216 Hrs........$55,500
www.clevelandbrothers.com 866-532-9023 Email: smasisak@clevelandbrothers.com
Low-Hour Rental Fleet Roll Out
866-532-9023www.clevelandbrothers.com
Email: smasisak@clevelandbrothers.comEquipment Located In Pennsylvania, & West Virginia
Page 20 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Original MFG TB-Series & VZ-Series BreakersFormerly distributed by Teledyne & BTI
Always ask for Genuine “OEM” Parts
3900 Ben Hur Avenue, Willoughby, Ohio 44094
www.toku-america.com SALES • SERVICE • PARTS
A PREMIER HYDRAULIC BREAKER MANUFACTURER FOR OVER 33 YEARS
3 Year Warranty - 2 Moving Parts - No Accumulators 100-12,000 Ft/Lb Product Range
Call: 877-954-9923FOR DETAILS ON
FREE DEMO!
3 YEARWARRANTY
Wright Express Releases Monthly Construction FCI ResultsWright Express Corporation, a leading
global provider of value-based business pay-ment processing and information manage-ment solutions, in collaboration with IHS aleading global source of information andanalytics, Aug. 23 released results of itsWright Express Construction FuelConsumption Index (FCI), which indicatedan increase of 1.4 percent in July versus itslevel the previous year. The Wright Express Construction FCI
measures national fuel consumption statis-tics for the construction industry, which pro-vides an accurate and up-to-date indicationof construction activity in the United States. “The results of the July 2012 Fuel
Consumption Index indicate flat growth inthe construction industry despite consistentyear-over-year growth,” said RickPomerleau, vice president, corporate devel-opment at Wright Express. “The construc-tion industry hit a speed bump in June,showing the industry is still on a slow path torecovery.” Wright Express worked with IHS to cap-
ture and analyze transaction data from itsclosed loop network of more than 180,000fuel and vehicle maintenance locations,including more than 90 percent of thedomestic retail fuel locations and 45,000
vehicle maintenance locations. With thisdata, the Wright Express Construction FCIcan be used to identify emerging trendswithin the construction industry and thenational economy. The indicators were tested at monthly,
quarterly and annual frequencies, with thegreatest insights produced using the year-over-year percent change of the monthlydata. For July 2012, the Wright ExpressConstruction FCI reported that fuel con-sumption by U.S. construction companiesincreased by 1.4 percent versus July 2011and increased by 0.2 percent versus the pre-vious month. The Wright Express Construction FCI,
which is available monthly in advance of theU.S. Census Bureau figures on construction
spending, is available at http://www.wright-express.com/fci. Last month’s Wright Express
Construction FCI diverged from theincreased construction spending levels evi-dent in most of the government’s subsequentconstruction data releases. Constructionspending excluding improvements — agood measure of activity — expanded by 0.7percent in June. Private residential construc-tion increased by 3.1 percent, again reflect-ing the year’s uptick in single-family hous-ing starts. The decrease in June was reflect-ed in housing permits, which decreased 3.7percent in June to an annual rate of 755,000due to a sharp drop in multi-family permitsin the South. Total construction put-in-placeincreased by 0.4 percent in June.
IHS Analysis According to the IHS analysis, the contin-
ued flat growth for the Wright ExpressConstruction FCI in July, and with the addi-tional loss in June, indicates a delayed recov-ery for the construction industry. New homesales fell 8.4 percent in June; however, theloss should not be considered significant dueto an anomalous sales plunge in the north-east. Despite the uncharacteristic decrease inJune, the housing market remains on trackfor recovery with the three-month averageshowing new home sales gradually increas-ing. The key obstacle to the housing recovery
continues to be tight credit conditions, whichis why sales to non-investors have been onlyinching up in recent months, despite lowmortgage rates and plenty of affordablehomes (in most markets). The homeownervacancy rate measuring the proportion ofhomes that are vacant and for sale slipped2.1 percent in the second quarter of 2012,which is still too high from the “normal”range of 1.6 percent to 1.7 percent. Homeprices have been rising slowly in recentmonths and any gain in prices is good newsbecause the price gains reduce the number ofhomeowners with “underwater” mortgages.
The Wright Express Construction Fuel Consumption Index indicated an increase of 1.4 percent in July versus its level the previous year.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 21
View Our Inventory atwww.haletrailer.com
New East Florida Spec Dumps, 24' x 96" x 60" tri-axle suspension, electric tarp
New East walking floors, 48' long x 102" x 13',spring suspension; Keith walking floor installed.
We Rent LowbedsWe Rent Walking Floors
ExcellentFinancingAvailable
NEW TALBERT & FONTAINE 5O & 55 TON LOWBOYS, Flat Level Deck & Raised Center, 25’ & 26’ DeckLengths, (2) King Pin Locations, Automatic 3rd Axle AirLifts, 275/70R 22.5, 3+1 Capability, In Stock!
New Landoll 440 & Trail King TK70SA, 50'x102", air ride suspension, 20K winch,
wireless remote, PSI system & dock levelers optional
New Etnyre 35 Ton & 55 Ton Paver Special Low Boys,
Air Ride Suspension, Tandem & Triaxle
New East Hardox Steel Dumps 34' x 96" x 66"SUPER HEAVY DUTY - Demolition Trailer, Air Ride, BarnDoor.
New Talbert 20 Ton tags, 21' deck, 6' beaver tail,17.5 wheels
NEW Fontaine Steel Flatbeds, 48’x102” SpringSliding Suspension Winches & Bulkhead Included
YOUR DEALER FOR HEAVY HAUL EQUIPMENTNEW 65-Ton Capacity Widespread Available: Talbert, Etnyre, Trail King
New Manac Steel Drop Deck Extendables 53’-71’x102” wide, 34” Deck Height, Tri-AxleSuspension, Air Lift
Talbert 35 Ton Lowboys22" Deck Height, Air Ride Suspension
Weight Laws are Changing!Heavy Haulers: we have the axles, jeeps, flip boxes and spreaders you need.
We RentLowboys, Blade
Trailers, Etc.
www.haletrailer.com
Concord, NC800-438-2250
Columbia, SC800-915-9900
Jacksonville, FL800-828-3055
New Fontaine Velocity Steel Drop Decks,48’x102”, Air Ride Spread Bulkhead and Winches
New Manac Hardox Steel Dumps, 40’x102”x100”,Single Point Susp, 87 Cu. Yds, Frameless and FrameType, Also Available w/76” Sides
New Fontaine & Talbert Dropside 55 & 60 Ton Lowboys,
26' Deck, 22.5 Wheels, Air-Ride/ Air Lift and Modular Available
New Fontaine Revolution H Composite Flatbeds48’x102”, Air Spread Suspension Aluminum Wheels,Winches, Also Available in a Drop Deck
8,990 LBS.
New Talbert and Etnyre 65 Ton Wide Spread Capable Lowboys
IN STOCK
IN STOCK
Page 22 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
DEALER IMPRINT AREA
> > >
INTRODUCING A NEW E.P.I.C. GENERATION
EFFICIENT
POWERFUL
INTELLIGENT
COMFORTABLE
REAANT IDEALER IMPR
www.mayequip.com
Lexington, NC336-357-5005
Columbia, SC803-865-1002
Looking for Certified Used Equipment?Have Equipment You’d Like to Sell?
Contact:
As a Division of BRAMCO, along with Brandeis Machinery & Supply andPower Equipment, we’re backed by more than 100 years of experience serving construction and mining companies, municipalities and utilities contractors. We have a 30 year history as the authorized Komatsu dealerin Kentucky, Indiana and Tennessee.
We’re second to none in understanding the value of your machines andhave earned a reputation for fair dealings. Trust K.I.T. Equipment to helpwith your fleet reduction efforts.
Call John Noble Today: 502-493-42201801 Watterson Trail • Louisville, KY 40232
www.kitequipment.com
K.I.T. Equipment
EQUIPMENT RENTALS FORCONSTRUCTION & INDUSTRY
103 Bryan St.Jacksonville, FL 32202904-354-5746
600 N. Commonwealth Ave.Polk City, FL 33868863-984-6262
888-253-2444 • www.pinnaclecentral.biz
For the best in Doosan portable equipment give us a call.• Generators• Light Towers• Dehumidifiers• Oil-FreeCompressors
• Straight Mast Forklifts
• Shooting Boom Forklifts
• Portable Dust Collectors
• Diesel & Electric Compressors
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 23
www.spectra-is.com
You can supervise all your sites with
the Trimble® Connected Community.
All connected site data for site
positioning, grade control and asset
management available on one tool.
Share and synchronize data between
the o�ce, partners and supervisors
to create unprecedented e�ciencies on
the job site. And, with real-time
internet connectivity, Trimble Tablet is
the tool that puts you back in the
driver’s seat with control over your
connected sites. Stakes or no stakes.
It’s one more reason why the largest
and most successful construction
companies are partnering with Trimble.
Shouldn’t you?
WAT C H
Y O U R B U S I N E S S
G R O W. . .
“The main advantage of using thissystem has been the time savings...
we’ve saved around a month onthe contract overall.”
Kevin Primmer,
Kelston Sparkes Earth Moving
exchang
e data, photos and messages wit
th the office
imblet tre aind out morF
om.cytivitoduc-primble
t
he imble: TrT
uthorAechnology tion T Te onstrucChe
yituthor
tion Limitvigaimble NarTrtion Division © 2009 onstrucimble CrTr
C-092 (06/09)TTC-092 (06/09). edveserts righll r. Aedtion Limit
h
u
y
Page 24 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Light Compaction.Hefty Lineup.Bridge repair. Road maintenance.Asphalt. Whatever your application,there’s a Chicago Pneumatic compaction solution for you. From plate compactors and tampers to walk behind double drumrollers and Bluetooth radio-controlledtrench rollers, you can count on Chicago Pneumatic equipment for outstanding power and performance.
cpcompaction.com People. Passion. Performance.
Find a Chicago Pneumatic dealer near you at cp.com or contact us at 800-760-4049.
TRENCH ROLLERS > SOIL & ASPHALT PLATES > FORWARD & RESERVIBLE PLATES > TAMPERS > WALK BEHIND DRUM ROLLERS
CALL DOUG OR SAM
(866) 485-7180WWW.RBUSED.COM
Dave Parker (R), ASC Construction, lends a hand at the Touch-A-Truck event thattook place in Chattanooga, Tenn., early in September. The program was started in2003 with funds provided by the Tennessee Commission on Children and Youth toprovide unique activities that promote child/parent bonding. ASC Construction, aswell as other agencies and organizations, were on site to ensure a good time washad by all participants.
ASC HostsTouch-A-
Truck
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 25
Page 26 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
It’s a mouthful to say — Sunshine State One Call ofFlorida, Inc. — and it’s even harder to remember. So, armedwith recent results of a brand identity study conducted bymarketing and communications agency MGH, Florida’sone-call center changed its name to Sunshine 811.“We created a 10-minute online survey,” Chris McMurry,
MGH senior vice president said. “It was sent to 15,137 e-mail addresses and completed by 413 people. The studyfocused on brand identity, brand name, brand perceptions,usage of the center and its services.”With a two-decade history in Florida and several names,
the study reflected what some already knew — brand con-fusion.“The study showed that most people remembered ‘sun-
shine’ in our name, but not the whole name,” Sunshine 811Executive Director Mark Sweet said. With “Sunshine” as the most consistent word mentioned,
MGH recommended the name Sunshine 811. The new namealso will be easier to remember because it’s shorter and uses811, which comes with substantial recognition frommomentum built by the national 811 campaign.Early on, there was some concern that using 811 in the
name could negatively impact Internet Ticket Entry usage. “We are pleased with an Internet Ticket Entry level of
more than 60 percent,” Sweet said. “Nobody wanted to seethat percentage decrease.”As a result, Sunshine811.com will be used interchange-
ably with Sunshine 811 as a dual marketing campaign —one that seeks to attract new users with the easy-to-remem-ber 811 phone number, and another that promotes the full-service damage prevention resources available to profes-sional excavators. “And there’s always that chance,” Sweet added, “that
we’ll attract new Internet users since the name no longeruses ‘call.’”Sunshine 811 currently is rebranding its communications
pieces and Web site.“Watch for more exciting things to come,” Sweet con-
cluded, “as we continue striving to make Florida the safestplace to dig.”
Florida’s One CallShortens Name toSunshine 811
EVERY MORNING MY HUMAN SHAVES OFF HIS FACE FUR, HE’S FUNNY LIKE THAT.
— TUCK adopted 05-04-11
Beard Equipment Company RentsOut Pink Tractor to Fight CancerBeard Equipment Company has come up with a novel
way to raise support for fighting cancer. Starting on Oct. 1and continuing for 12 months, Beard Equipment will rent aspecial pink tractor to customers, with all rental revenuegoing to USA Children’s & Women’s Hospital and the USAMitchell Cancer Institute.“While launching our wellness program we recognized
that employees, customers, relatives and friends have insome way been touched by cancer,” said Kristen BeardDeLaney of Beard Equipment. “We at Beard Equipmentwanted to make a contribution to the cancer research com-munity. “While exploring ways to contribute we realized that we
have two outstanding research facilities here in Mobile,” saidBrooke Beard Dodson of Beard Equipment. “USA’sMitchell Cancer Institute and USA Children’s & Women’sHospital seemed to be ideal organizations to help make a dif-ference.”The attention-getting pink tractor is actually a 22 ton (20
t) excavator, a construction tool for contractors for generalsite excavation, installation of pipe and utilities and landclearing. The pink paint is being donated by Tommy Englishof Automotive Paint Supply and PPG. Rental rates are $800daily, $2,000 weekly and $6,000 monthly. “We have hopes of raising between $60,000 and $70,000
for Children’s & Women’s and the Mitchell CancerInstitute,” DeLaney said. The tractor will be available to rentin Mobile and through Beard Equipment’s Florida locationsin Pensacola, Panama City, Freeport, Jacksonville, Lake Cityand Palatka. For more information about renting the pink tractor, con-
tact Beard Equipment Company in Mobile 1-855-GOB-EARD (462-3273).
About USA Children’s & Women’s HospitalUSA Children’s & Women’s Hospital is among fewer
than ten freestanding hospitals in the country dedicatedspecifically to the health care needs of children and women,
offering Mobile’s only neonatal and pediatric intensive careunits, pediatric oncology and sickle cell outpatient center andhigh-risk obstetrical care. With more than 2,700 births annu-ally, USA Children’s & Women’s Hospital is the area’sleader in deliveries.A major expansion that will nearly double the size of USA
Children’s & Women’s Hospital is scheduled to be complet-ed in 2013, recognizing the community’s validation of thehospital’s quality of care and the hospital’s opportunity tocontinue to meet the needs of a varied and growing popula-tion. For more information, visit www.usahealthsystem.com.
About the University of South Alabama Mitchell
Cancer Institute University of South Alabama’s Mitchell Cancer Institute
(MCI) is the only academic cancer research institute in theupper Gulf Coast region, and is the largest single researchendeavor in the history of the University of South Alabama.MCI offers cutting edge treatment and research under oneroof. The strong spirit of collaboration between clinical care,basic and translational research and the referring physician iswhat sets MCI apart. The interdisciplinary cancer teamworks together to develop life-saving treatments for cancerpatients.MCI’s vast research initiatives are a key component of its
commitment to provide the most advanced and most com-prehensive cancer care including the latest treatment tech-nology, CyberKnife Robotic Radiosurgery system and thecomfortable treatment environment of its infusion suite. Inaddition to improving cancer care, the Institute stimulates thegrowth of a strong regional economy built on biomedicineand biotechnology. Together with the entire USA HealthSystem, USAMCI focuses on discovery and development ofnew and more effective treatments for cancer. For more information, visit www.usamci.com.
Beard Equipment hopes to raise between $60,000 and $70,000 for USA Children’s & Women’s Hospital and theMitchell Cancer Institute.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 27
Crawler and Rough Terrain Cranes
Crawler Cranes Rough Terrain Cranes
Uplifting
America FSANY Crawler and Rough
eatures Full Lines ofAmerica Fer TTerrain CranesCrawler and Rough
eatures Full Lines oferrain Cranes
Uplifting
Uplifting
Crawler CranesSCC8100SCC8150SCC8200
Crawler and Rough
Crawler Cranes Rough T Terrain SRC840SRC865SRC865XL
Craneserrain e
SRC865XL
UpliftingerformanceP
Upliftingerformance
erformance
SCC8300SCC8500
318 Cooper Circ 770-631-7731 | Email:ax: 678-251-2869 | Fel:TTel:
SRC885
GA 30269, eachtree City Ple,318 Cooper Circamerica.com | wwwy sales@san 770-631-7731 | Email:
GA 30269america.comy.sanamerica.com | www
PIRTEK Becomes Member ofAmerican Recyclers Association
Recently PIRTEK joined the AutomotiveRecyclers Association to generate awarenessabout the services offered by PIRTEK toscrap and recycling companies.
Established 1943, the AutomotiveRecyclers Association (ARA) has represent-ed its industry dedicated to the efficientremoval and reuse of automotive parts, andthe safe disposal of inoperable motor vehi-cles. The association services approximate-ly 1,000 member companies through directmembership and more than 2,000 othercompanies through its affiliated chapters.Suppliers of equipment and services to thisindustry complete ARA's membership.
PIRTEK understands the importance ofkeeping equipment and work crews up andrunning. When a hose fails, it can cost recy-cling businesses thousands of dollars in lostproductivity. That’s where PIRTEK can helpthe ARA members reduce the costs of equip-ment downtime, idle crews, labor and parts,fuel, overtime and lost opportunity associat-ed with hose failures.
PIRTEK will be exhibiting at the up andcoming Texas Automotive RecyclersAssociation (TARA) being held at theDouble Tree hotel in Austin Texas, from Oct.11 to 13. The PIRTEK booth, will have give-aways and vouchers.
Rockledge, Fla.-based PIRTEK offers a24 hour, 7 day service serving almost everyfacet of industry including construction,manufacturing, transportation, agricultureand engineering just to name a few. When anequipment breakdown occurs, it often resultsin costly delays in time and labor before theproper replacement hose is located andinstalled. PIRTEK vans carry the componentparts necessary to manufacture hose assem-blies onsite. Hose and fittings also can bepurchased over-the-counter at PIRTEK’sCenters which serve as home base to itsmobile fleet. There are more than 40PIRTEK Hose Service & Supply Centersnationwide and a fleet of more than 200servicing major metropolitan marketsthroughout the United States.
Page 28 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
By Martin CrutsingerAP ECONOMICS WRITER
WASHINGTON (AP) U.S. construction spending fell inJuly from June by the largest amount in a year, weigheddown by a big drop in home improvement projects. But spending on construction of single-family homes and
apartments increased again, a hopeful sign for the modesthousing recovery. The Commerce Department said Sept. 4 that overall con-
struction spending declined 0.9 percent in July. It followedthree months of gains, which were driven by increases inhome and apartment construction. The June decline left spending at a seasonally adjusted
annual rate of $834.4 billion. That’s nearly 12 percent abovea 12-year low hit in February 2011. Construction activity isroughly half of what economists consider to be healthy. “In short, a weaker than expected report,” said Jim
O’Sullivan, chief U.S. economist at High FrequencyEconomics. Still, O’Sullivan noted that the data are extreme-ly volatile and the trend in residential spending “is clearlystill upward.” Spending on residential construction fell 1.6 percent in
July from June to a seasonally adjusted annual level of$264.6 billion. But that was dragged lower by a 5.5 percentdecline in home improvement projects. Spending on single-family homes rose 1.5 percent, the
fourth straight monthly gain. And spending on apartmentconstruction was up 2.8 percent, the ninth straight gain. Separately, CoreLogic, a private real estate data provide,
said U.S. home prices jumped 3.8 percent in the 12 monthsending in July. The year-over-year increase was the biggestin six years and the third national measure of home prices toshow steady gains. Rising prices and higher home sales have made builders
more confident in the housing market. A survey of buildersentiment rose in August to its highest level since the hous-ing market went bust five years ago. The gains in housinghave been fueled in part by record low levels for mortgagerates. The average rate for a 30-year fixed rate mortgage hasbeen below 4 percent all year. Still, the construction industry remains weak. Spending on nonresidential projects fell 0.9 percent to an
annual level of $294.1 billion. Spending on governmentprojects dropped 0.4 percent to a level of $275.7 billion.Spending on state and local building projects fell 0.3 percent,while spending on federal construction projects was down1.3 percent. Despite the modest gains in housing, the broader econo-
my weakened in the spring. Economic growth slowed to anannual rate of just 1.7 percent in the April-June quarter,down from a 2 percent rate in the first three months of theyear. Economists forecast growth will average 2 percent in the
second half of the year. That’s not enough to significantlylower the unemployment rate, which stood at 8.3 percent inJuly.
U.S. ConstructionSpending Fell 0.9Percent in July
SANY Builds World’s Largest, MostAdvanced ExcavatorFactory in ChinaSANY has opened the
world’s largest and mostadvanced excavator factorynear Shanghai, China, thatcan produce an excavatorevery five minutes, accord-ing to the manufacturer.The Lingang Industrial
Park has 10.7 million sq. ft.of total space, with 5.9 mil-lion sq. ft. of manufacturingspace. The facility cost$818.5 million to build. Thefactory uses a computerizedproduction-managementsystem for maximum effi-ciency, managing the entireprocess, from raw steel plateto structural welding, tocomponents and finalassembly. Excavator structures andcomponents are transported automati-cally from underground tunnels to opti-mize production. The factory will pri-marily produce excavators in the 20 to30-ton (18 to 27 t) size range.The facility is unique for its 43,000
sq. ft. of gardens, reflection pools, bam-boo stands and marble patios that flankthe assembly lines inside the facility.The gardens include palm trees, flow-ers, grass and fountains.“Our Lingang facility is the most
advanced, highest-capacity excavatorfactory in the world, and SANY pro-duces more excavators globally thanmost other equipment brands,” said TimFrank, chairman of SANY America Inc.“North American customers mightrightly ask, ‘What’s in it for me?’ It’ssimple: robust and reliable structures,cut and welded by precise, fully roboticsystems, assembled by a dedicatedteam.“Our excavator team is experienced
at producing almost as many excavators each year as aresold in the United States by all manufacturers combined,”Frank said. “Add to that robust base the fact that we haveU.S. assembly and component supply in our facility outsideof Atlanta. You get a great machine at a great price. This ispart of SANY’s culture of excellence in manufacturing effi-ciency, and our plan to become a global leader in excava-tors.”In addition to excavators produced in Lingang for sale in
China, SANY produces base excavator kits that are shippedto SANY America’s assembly facility in Peachtree City, Ga.The kits are assembled there, adding the options and fea-tures preferred by North American customers.SANY is a global leader in the manufacture and sale of
hoisting equipment (crawler, truck, rough-terrain and all-terrain cranes), concrete machines (concrete pumps, placing
booms, mixer trucks and batching plants), road machinery(motorgraders, rollers, pavers and asphalt batching plants),port equipment (container reach stackers, empty-containerhandlers, heavy forklifts and gantry cranes), excavators,mining equipment (rigid haul trucks, road headers, miningvehicles, longwall systems and continuous miners), pile-driving machinery and wind turbines.SANY America Inc. sells, distributes and supports
crawler cranes from 110 to 550 tons (99 to 499 t), rough-ter-rain cranes from 40 to 85 tons (36 to 77 t), hydraulic exca-vators from 7.5 to 33.5 tons, port reach stackers with maxi-mum lift of 99,200 lbs. (44,996 kg), and empty-containerhandlers with maximum load of 19,850 lbs. (9,000 kg).SANY America has an operations, assembly and researchand development center in Peachtree City, Georgia. For more information, visit www.sanyamerica.com.
SANY excavators await shipment from the factory in Lingang, China.
The new SANY excavator factory south of Shanghai, China, includesinnovative features such as tranquil fountains, flowers and palm trees.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 29
Page 30 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL
• No tools required• No expensive
hardware needed• No more rags
stuffed into hoses• No more messy
plastic caps• The ultimate
contamination control tool• One hand installation• Eliminate hydraulic
oil spills & clean up• Quick installation
& ease of usage• Safe for personnel
& environment• Industy acclaimed• 100% Made in USA
For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com
ARTBA Annual Student Video Contest Winners Announced
A group of 18 high school students fromNorth Carolina and three graduate and post-graduate students from New England werenamed winners of the American Road andTransportation Builders Association’s(ARTBA) annual “Student Video Contest”on Sept. 10.
Sponsored by ARTBA’s Research andEducation Division (RED), the contest chal-lenges grade school and post-secondary stu-dents to develop a brief video that exploresissues relating to America’s transportationnetwork. Students were asked to addresshow transportation infra-structure is built and paid for,the impacts of traffic conges-tion, transportation andurban development plansand public perception oftransportation development.
Submissions werereviewed by a panel of fiveARTBA members. The win-ning entries were shownSept. 13 during the ARTBANational Convention inMemphis.
Category One —Elementary, Middle orHigh School Students:
“How to SolveCongestion”
Members of the 2012Summer High SchoolTransportation Institute atNorth Carolina A&T StateUniversity
Eighteen high school students participat-ing in North Carolina A&T StateUniversity’s 2012 “Summer High SchoolTransportation Institute” and led by ProgramManager Deborah Underwood, created anentertaining and upbeat, two-and-halfminute video which provided a simple, yetcompelling description of the mobility chal-lenges facing drivers on the nation’s road-ways. It offered real-world solutions forrelieving congestion, such as high occupan-cy toll lanes, traffic updates via text messageand accelerated bridge construction. Thegroup presented the information using multi-modal visuals and interviews with studentactors. Category Two — Post-Secondary,
College or Graduate Students:“Modernizing Transportation
Technology” David Champoux, graduate student in
transportation engineering, University ofMassachusetts-Amherst; Joseph Smith,
undergraduate in media communica-tions, University of Southern Maine; andAdrian Wong-Ken, undergraduate inmedia communications, University ofSouthern Maine.
One graduate student and two college stu-dents from New England created an inform-ative, three-and-half minute video thatlooked at the congestion caused by outdatedtraffic signal systems, and presented someinnovative ways to make commutes moreefficient by integrating existing technologyinto transportation frameworks. The team
interviewed a transportation engineer andpublic official in the technology-focusedvideo, and profiled specific projects in whichthe new traffic signal technology was imple-mented.
Honorable Mention in CategoryTwo — Post-Secondary, College
or Graduate Students:“Paying Our Way”Jamesa Marshall, graduate student in
civil engineering, University ofWisconsin-Madison
Marshall created an illustrated videowhich provided an in-depth but straightfor-ward description of an alternative financingpilot project conducted by the OregonDepartment of Transportation, in which 299motorists volunteered to pay what is called avehicle miles traveled tax, or “VMT” ratherthan a gas tax at the pump. It addressed thebenefits and challenges to nation-wideimplementation of such a program using cre-ative drawings and narration.
Sponsored by ARTBA’sResearch and EducationDivision (RED), the contestchallenges grade school andpost-secondary students todevelop a brief video thatexplores issues relating toAmerica’s transportationnetwork.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 31
Nissan Forklift Names Winners of Service Excellence AwardsNissan Forklift Corporation announced the winners of its Service
Excellence Program (SEP) Awards for the past year. The SEP isdesigned to reward and recognize those Nissan Forklift dealers whohave achieved the highest standards of aftermarket service.Nissan Forklift’s SEP was established in 1995. Its ongoing
mission is to provide a comprehensive program for its dealerservice network that is based on implementation of best-in-class principles covering technical and customer servicepractices. Through SEP, Nissan Forklift recognizes thosedealers who cultivate an environment for delivering a trulyexceptional customer experience, and ultimately achieve acompetitive advantage in the markets they serve.Nissan Forklift dealerships that participate in the service
excellence program meet standards across seven main cat-egories including business planning, employee compe-tence and customer satisfaction. The standards in each arearesult in Nissan Forklift dealerships that provide more effi-cient work order processing and billing, well-trained and cer-tified technicians as well as overall quality products and servic-es for their customers.Those dealers who excel across the categories are rewarded for
their efforts by achieving one of the program’s threelevels of awards: gold, silver and bronze.
Service Excellence Award Winners 2011
Gold level award winners are:• Equipment Depot in Mechanicsburg, Pa.• J.M. Equipment Inc. in Manteca, Calif.• New England Industrial Truck Inc. in Woburn,
Mass.
• Nissan Forklift of Michigan in Grand Rapids, Mich.• M & L Industries in Metairie, La.
Silver level award winners are:• Adobe Equipment LLC in Houston, Texas• Buffalo Materials Handling in Buffalo, N.Y.• Handling Systems in Phoenix, Ariz.• J.H. Ryder Machinery Ltd. in Mississauga, Ontario• J.M. Equipment Inc. in Sacramento, Calif.• J.V. Equipment in Edinburg, Texas• Liftec in S. Plainfield, N.J.• Lift Solutions in Omaha, Neb.Bronze level award winners are:• A.F. Enterprise in Shreveport, La.• A.F. Enterprise in Longview, Texas• G.W. Van Keppel Company in Kansas City, Kan.• LPM in Bethany, Okla.“Congratulations to our service excellence award winners,”
said Dan Domberg, director, customer quality and satisfaction,Nissan Forklift. “The team effort and priority that these dealers have
given to achieving total customer satisfaction make them very deservingof this acknowledgement.”
About Nissan Forklift CorporationNissan Forklift Corporation designs, manufactures and supports a complete line of
material handling equipment that delivers features resulting in greater dependability,higher productivity and lower operational costs. Headquartered in Marengo, Ill., NissanForklift has a network of more than 100 authorized dealerships with over 225 locationsacross North, South and Latin America, as well as additional worldwide locations. For more information, call 815/568-0061 or visit www.nissanforklift.com.
Nissan Forklift dealer-ships that participate in the serviceexcellence program meet standardsacross seven main categories includ-ing business planning, employee com-petence and customer satisfaction.
Page 32 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
‘Lady Crane, ’ Colleagues Close One Door, Open Another
By Jennifer HetrickEDITORIAL ASSISTANT
As of August 31, Nancy C. Caralla, coined“Lady Crane,” has officially closed the doors onGulf Crane & Equipment, the company her fatherhad founded in 1971 and which she had ownedand operated since her father’s death in 2004. It was not without a sense of sadness and fond
memories that the decision was made to retire thefamily owned business and Caralla stated, “Thetime had arrived to completely move forwardwhile keeping the solid foundation poured by myfather, and carrying forth the business morals,dignity and integrity which Gulf Crane &Equipment was built upon.”That is not to say that Caralla is out of the crane
industry. After all, this is a woman who once saidshe had “cranes in her blood,” and Caralla will bethe first to tell you that if you need a crane, craneadvice, a crane operator, crane anything, she willcertainly be available to help you out throughGulf Winds Renewable-Construction (GWR-C),the company Caralla founded in September 2011.GWR-C is an international company specializingin renewable energy construction projects andheadquartered in New Port Richey, Fla., withsatellite offices located in Durham, N.C., andGenoa, Italy. Now Caralla, seeing increased interest and
necessity in wind energy safety, has partneredwith professional wind industry associates andformed the NationalWind Technician Organization to give the grow-ing number of professional wind technicians theirown venue in which to find products, servicesand safety education tailored to their professionalneeds.The National Wind Technician Organization is able to
provide safety training services for all personnel involved inthe process of building, maintaining, operating, and manag-ing wind turbines and wind sites.Scott Battles, National Wind Technician Organization’s
northwest and midwest operations manager stated, “Myfather was an OSHA compliance officer. I did not realize thathaving him hammer safety into my head when I was youngwould be such a strong focus later in my life.” Battles also is a professional wind technician and wind
industry educator, who carries a “great interest in and passionfor the safety of the wind industry professionals.” In his roleas educator, Battles follows his father’s lead, preaching safe-ty to his students every day.
Battles has certifications from FCC licenses to G.E. 1.5wind turbines to Microwave which have been a surprisinglygood mix of knowledge bases. A solid and unique background in communication elec-
tronics, railway, wind turbines and wind farm constructionenables Battles to provide professionals and students withfirst-hand knowledge, along with practical experience whendiscussing various aspects of products, service, and safetytopics. At the opposite side of the country Matthew Soto serves
as National Wind Technician Organization’s southwest oper-ations manager.“We are certified to train individuals in the use of the
Skylotec Milan rescue and evacuation devices. We can trainyou and your employees in harness inspection, basic rescue
techniques and evacuation techniques all at yoursite or location. Membership to the NationalWind Technician Organization will entitle mem-bers to a discount on equipment, for example,harnesses, rescue devices, etc.”Soto has been in the wind industry for more
than six years and comes to the National WindTechnician Organization with experience inoperations and maintenance, commissioning,site construction, large corrective, recruitment,technical and safety training. Recently, Soto hasbeen focusing on the safety aspect of trainingentry-level wind technicians in the use of fallprotection and working at heights training andhas spent a year-and-a-half as a technical instruc-tor and safety trainer. Soto is certified in the fol-lowing areas: • Miller Fall Protection Competent Person• Skylotec Competent Person (Milan A-024
and A-020)• Siemens Level 2 Basic Harness Instructor• Siemens Safety and Rescue Instructor, Basic
Rescue and basic Evacuation • ICM Personal Fall Protection Equipment
Product KnowledgeAdditional members of the National Wind
Technician Organization team are:Nancy C. Caralla, East Coast & International
operations managerMike Kyes, ITT administratorPaul Bosworth, UK division administratorTony DelMonaco, organization photographerNational Wind Technician Organization is
preparing to open individual memberships forprofessional wind technicians, wind industryeducators, wind industry safety professionalsand construction professionals worldwide.Memberships are expected to be available in
September, featuring the National WindTechnician Organization “Turbine Card,” filledwith tailored discounts from well-known nation-wide vendors, franchises and companies only forNational Wind Technician Organization mem-bers and handpicked by the organization. A fewof our membership partners offering their tai-lored discounts are: La Quinta Inns & Suites,1800flowers.com and Enterprise Rent-A-Car. The “Turbine Card” will be offered at the low
one-year membership fee of $50.00.Students will be offered a twenty-five percent
discount off the yearly membership fee: $37.50. Student IDrequired.Caralla has long proclaimed, “We’re ALL In It Together!”
and the professionals in the wind industry are no exception. For more information, visit www.nationalwindtech.orgE-mail: nationalwindtech@yahoo.comNational Wind Technician Organization Facebook page:
https://www.facebook.com/nationalwind.technicianorgani-zationAnd follow them on Twitter: @NationalWindTecNational Wind Technician OrganizationSt. Petersburg, Fla. 33708 (919) 201-1512.(This story also can be found on Construction
Equipment Guide’s Web site at www.constructionequip-mentguide.com.) CEG
Photo courtesy of Tony DelMonacoThe National Wind TechnicianOrganization gives the growingnumber of professional windtechnicians their own venue inwhich to find products, servicesand safety education tailored totheir professional needs.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 33
YOU DON’T HAVE TO DIG REAL DEEP......TO DIG REAL DEEP
You don’t have to have real deep pockets to invest in a LiuGong. LiuGong hydraulic excavators are
designed and built to compete value-wise, both in the showroom and out on your next job.
With lower ownership and operating costs, you’ll be able to break out of your costly earthmoving routine and make some money with a LiuGong.
From a mini-excavator for your next landscaping job to a full-sized machine for
some major pipeline chores, check one out at your LiuGong dealer today.
LiuGongNA.com281-579-8882
LiuGong is a � fty-plus-year-old construction equipment manufacturer with a huge range of products for the North American quarry, construction, recycling, timber, landscaping, utility and other markets – WHEEL LOADERS. HYDRAULIC EXCAVATORS. BACKHOE-LOADERS. SKID-STEER LOADERS. SOIL COMPACTORS. LiuGong is the only equipment manufacturer to receive the coveted National Quality Award of China and are ISO9001 and ISO14001 certi� ed. Truly a top-shelf, world-class organization.
SELECT DEALER TERRITORIES AVAILABLE
OPERATING WEIGHTS TO 81,600 POUNDS BUCKET CAPACITIES TO 2.5 CUBIC YARDS DIGGING FORCES UP TO 48,559 POUNDS
YANMAR & CUMMINS ENGINES UP TO 260 HORSEPOWER DIESEL ENGINES
DUMPING HEIGHTS TO 24’4” DIGGING DEPTHS TO 24’1”
Page 34 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Precast Prison Cell Modules Fabricated Off Project Sitetion with a close security designation.“Rotondo Weirich provided the precast
prison cell modules for the Bledsoe project,”explained Bill Franklin, Rotondo Weirichbusiness development director. “We special-ize in precast prison cells and perform thiswork at or near the project site.”The Lederach, Pa.-based company mobi-
lizes its equipment and personnel and estab-lishes a local casting facility for each projectperformed. The only PCI certified precastmanufacturer in the country that mobilizesits operation to the project site, RotondoWeirich established a casting facility nomore than a few miles from the Bledsoeprison site to form an assembly line processto cast the modules and install the interiorfurnishings and equipment. “This pre-fabricated approach takes the
manufacturing of the prison cells off the crit-ical path of construction,” said Franklin.“We began the set-up of our casting facilityin late spring/early summer of 2010. Webegan casting prison cells in July 2010 andcompleted the casting in November of thesame year.”According to Franklin, “Prefabricated
precast prison cells depend on early deci-sions and approvals from the project owner.Rotondo Weirich mobilizes all of our equip-ment to the project site including our steelforms to cast the modules. For the Bledsoeproject we mobilized three quad forms. Eachform is capable of casting a cell module con-taining four prison cells. The forms producea module approximately 30 ft. long and 20ft. wide. We also mobilized a Rubber TireGantry Crane with 70-ton capacity at themanufacturing facility, as well as a 300-toncrawler crane to erect the modules into posi-tion on the project site.”Crews used local ready mix concrete and
welded wire mesh reinforcement to cast themodules. All specialty detention equipmentis cast in and installed to complete the mod-ules. This included hollow metal doors andframes, light fixtures, plumbing fixtures,detention furniture and all windows andglazing.The new facility’s cost-saving features
include spacious windows and a series ofskylights. In addition to five housing units,the prison will reportedly feature buildingsfor security, administration, visitation, infir-mary, cafeteria and work programs. According to numbers released by the
TDOC, the total capacity once expansion iscomplete will be 2,400 beds. There will be981 existing beds and 1,444 new beds. Theestimated cost of overall construction isapproximately $208 million. By utilizingexisting administrative staff, operationalcosts at the facility are expected to be signif-
icantly lower than if thedepartment had built a stand-alone facility. Experiencedstaff also are expected toensure a stable transition anddependable workforce as theprison becomes operational. Upgrades will be made to
regional water and electricalsystems, according to the TDOC, which offi-cials say will benefit not only the prison, butalso the local community. A sophisticatedgeo- thermal heating system will serve theentire prison. The system uses 580 wells tocirculate air underground where the temper-ature is 55 to 58 degrees. This reduces thecost of additional heating or cooling. Mid-State Construction Co. Inc. was con-
tracted to install the geothermal heatexchange field and related distribution pip-ing.“This is the largest geo- thermal heat-
ing/cooling system installed to date in thestate of Tennessee,” explained Jason Gentryof Mid-State’s geothermaldivision.“Geothermal heating and coolingsystems are an energy-efficient alternativefor the heating and cooling of residential,commercial and institutional applications.The more moderate and constant tempera-tures of the earth used by the geothermal sys-tem as a heat sink/source are advantageous,when compared to the outdoor air used byair-source heat pump systems. Geothermalheating and cooling systems use the naturalproperties of the earth and natural heat trans-fer to provide heating and cooling to build-ings.”Mid-State drilled the first geothermal bore
in July 2010 with work substan-tially complete by October 2011.“One of the biggest chal-
lenges was the fact that almostall of the lateral excavationwould be in rock,” said Gentry.“To alleviate some of the rockexcavation in the geothermalheat exchange field, the decisionwas made to rock trench the lat-eral ditches before drillingoccurred to expedite the excava-tions after the drilling was com-pleted. There was more than15,000 lineal ft. (4,572 m) of 16-
in. HDPE distribution piping that needed tobe installed. The pipe weighed 30 lbs/foot.This pipe is heat fusion welded, whichrequired 9,000 welds and with its weight ittook a great deal of coordination to install.Also, with 580 bores at 500 ft. deep each todrill the coordination of up to five drill rigs ata time was a challenge.“This is the backbone of a vertical geot-
hermal heat and cooling system. The loadthat can be handled by a geothermal systemis dependent upon the overall bore footagedrilled for the ground heat exchanger,”Gentry concluded.The drills used to make the 500 ft. bores
were T-4 Ingersoll Rand down the hole ham-mer drills. The 16 in. HDPE pipe wasfusion-welded, using a McElroy 618TracStar Fusion Welder. Materials included585,800 ft. of one-and-one-quarter inch DR-9 HDPE pipe for the geothermal heatexchanger loops, 5,000 ft. of 16 in. DR-11HDPE pipe for distribution piping, morethan 654,000 ft. of HDPE pipe was installedfor the geothermal heat exchanger and distri-bution piping.The general contractor of the project is
Flintco LLC, Memphis, Tenn..Subcontractors included E. Cornell MaloneCorporation of Jackson, Miss., which com-
pleted the prison’s roof insulation, mem-brane and related metal trim and flashings.Work began in September 2010.“This project carried through the winter
months, which made it virtually impossibleto roof,” explained E. Cornell Malone, con-tract administrator, Shannon Sumrall.“Projecting up to this time and prioritizingthe buildings was a necessity to keep othertrades busy and maintain the project sched-ule. There were 16 buildings composed ofconcrete, wood and steel decks. Though allhave a two-ply SBS system, assemblieswere different for each deck type. Stayingorganized and focused was a must.”
Sumrall said 50-ft. (15 m)reach forklifts were used forloading materials to roof areas.More than 640,000 sq. ft.(59,458 sq m) of roof mem-branes were needed. The roofsystem is composed of mini-mum R-21.7 insulation valueswith a reflective SopraStar Capsheet manufactured by Soprema. The Bledsoe County prison
will house mostly medium-secu-rity prisoners. One of the mostinteresting designs involved apair of tunnels that serve as thesole entrance and exit for theprison. The tunnels, going underfences, reportedly connect to themain prison without interruptinga perimeter road around the
structure. Employees, visitors and prisonersentering or exiting the site will pass throughthe central control area’s prison staff.Bledsoe is one of only two prisons in thestate that have incorporated such a system sofar.Once the prison is ready to officially open
its doors early next year, the inmates will bemostly state prisoners now housed in countyjails in different regions of the state.Although most will be medium security,there will be a housing unit for prisonersclassified higher than medium security and aunit to house minimum-security inmates.Considered one of the state’s largest ongo-
ing construction projects, the BledsoeCounty prison is being built on 2,200 acresof the Cumberland Plateau. Officials withthe Tennessee Department of Correctionssay the additional jobs created by the expan-sion will help to put residents of BledsoeCounty to work. They also report that thenew facility should be completed byNovember 2012, with the prison expected toreceive its first inmates beginning in Januaryof 2013.
This story also can be found onConstruction Equipment Guide’s Web siteat www.constructionequipmentguide.com.)CEG
Photo courtesy of Rotondo WeirichRotondo Weirich usessteel forms to cast themodules. For the Bledsoeproject the company mobi-lized three quad forms.Each form is capable ofcasting a cell module con-taining four prison cells.
COMPLEX from page 1
Photo courtesy of Jason Gentry of Mid-State Construction Bore field supply return piping and valving in the geothermalpump room of the prison, shown here.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 35
Page 36 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 37
NEXT DAY PARTSFrom Komatsu - The Parts Experts
Everywhere in North AmericaIf you’re operating Komatsu equipment in North America, you have the peace of mindthat comes from 99% next-day parts availability. Your distributor and Komatsu’snetwork of regional Parts Distribution Centers ensures you have access to the partsyou need when you need them most.
From coast to coast, and everywhere in between, Komatsu’s staff of trained experts is standing by 24/7 to help with the right parts to keep you up and running.
www.komatsuamerica.com
NEXT DFr
NEXT Dom Komatsu - The Parts ExpertsFr
Y PAAY PNEXT Dom Komatsu - The Parts Experts
STAR P PARom Komatsu - The Parts Experts
S
.komatsuamerica.comwww.komatsuamerica.com
RISH EQUIPMENT COMPANYwww.rish.com
Bluefield, WV • 304/327-5124Chesapeake, VA • 757/485-2100
Chester, VA • 804/748-6411Coeburn, VA • 276/395-6901
Opal, VA • 540/439-0668Salem, VA • 540/380-2090
Staunton, VA • 540/887-8291
POWER EQUIPMENTwww.powerequipco.com
Knoxville, TN • 865/577-5563LaVergne, TN • 615/213-0900
Chattanooga, TN • 423/894-1870Kingsport, TN • 423/349-6111Memphis, TN • 901/346-9800Saltillo, MS • 662/869-0283
LINDER INDUSTRIALMACHINERY
www.linderco.com
www.facebook.com/linderindustrialmachinery
FloridaFt. Myers • 239/337-1313
Jacksonville • 904/786-6710Ocala • 352/629-7585
Orlando • 407/849-6560Pembroke Pines • 954/433-2800
Plant City • 813/754-2727West Palm Beach • 561/863-0570
North CarolinaAsheville • 828/681-5172Charlotte • 704/376-7554Greenville • 252/695-6200High Point • 336/665-0110Raleigh • 919/851-2030
Wilmington • 910/254-2031
South CarolinaColumbia • 803/794-6150
Greer • 864/877-8962North Charleston • 843/552-0095
TRACTOR & EQUIPMENTCOMPANY
www.tractor-equipment.com
AlabamaAlabaster • 205/621-2489Anniston • 256/831-2440
Birmingham • 205/591-2131Decatur • 256/355-0305Dothan • 334/678-1832Mobile • 251/457-8991
Montgomery • 334/288-6580Shoals Area • 256/383-5666Tuscaloosa • 205/752-0621
FloridaPanama City • 850/763-4654Pensacola • 850/505-0550
GeorgiaAlbany • 229/435-0982Atlanta • 404-366-0693Augusta • 706/798-7777Calhoun • 706/879-6200
Columbus • 706/562-1801Hoschton • 706/654-9850Kennesaw • 678/354-5533
Macon • 478/745-6891Savannah • 912/330-7500
find us on
Page 38 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Volvo Construction Equipment
www.ascvolvo.com
CORPORATE704-494-8100
GEORGIABuford
678-318-9500Savannah
912-964-8079Forest Park770-319-0074
NORTH CAROLINAAsheville
828-687-0620Charlotte
704-596-8283Greenville
252-754-5280Raleigh
919-661-8710
SOUTH CAROLINACharleston843-414-1120Columbia
803-791-0740Piedmont
864-704-1060
TENNESSEEChattanooga423-308-7940Knoxville
865-525-1845
VOLVO LOADING ZONE.LET’S WORK.There’s strength in numbers. Breakout force, bucket capacity, daily productivity, fuel efficiency and a wide range of loaders and options - ASC ConstructionEquipment has the Volvo equipment you can count on. Volvo does the heavy lifting. So you have the capacity for more jobs and bigger profits.Let’s work. Visit your local ASC dealer today.
The Rental Show Returns to Las Vegas in ’13In Las Vegas, it’s all about
increasing your odds — and thesame holds true for The RentalShow, which will be held there nextFeb. 10 to 13. Every aspect of theAmerican Rental Association’s57th annual convention and rentaltrade show is designed with onething in mind: helping attendeesmake more money.The Rental Show moves to a
new venue for 2013, The SandsExpo and Convention Center,which is located in the center of thefamous Las Vegas Strip. And whilethe new site provides new opportu-nities for dining and entertainment,the core factor of helping attendeesbe profitable remains the same.“The Rental Show is right on the
money for rental success,” saidAllison Box, ARA senior adminis-trative director of association serv-ices. “We’re using ‘right on themoney’ as the tagline for TheRental Show 2013 because it’s true— this is the show for people seri-ous about profit. All elements of the
show, from new rental products tofresh educational ideas from theseminars and relationships thatdevelop in connecting with otherrental business owners and suppli-ers, are designed to focus on mak-ing attendees more profitable.”Highlights of the 2013 schedule
include: • A full day of 16 seminars on
Sunday, Feb. 10, with topics thatrange from industry updates to TierIV engines and healthcare to beingprofitable in the new economy.Financial sessions with SteveAbercrombie also are on the agen-da, as well as Internet marketingwith David McBee. In addition, therental town hall seminars return onFeb. 12. There also will be a new“Wednesday Wake-Up” session onFeb. 13 with Lt. Col. Rob “Waldo”Waldman.• The keynote session featuring
Captain Mark Kelly, who will sharehis story of courage and hope —from his space shuttle missions tohis wife Gabrielle Giffords’ recov-
ery from a January 2011 assassina-tion attempt. His keynote addresswill touch on what he’s learnedfrom his experiences including theimportance of leadership and team-work. The keynote session is spon-sored by Ditch Witch.• Three days of trade show, Feb.
11 to 13, with the latest rentalequipment for construction/indus-trial, general tool/homeowner andparty/special event businesses.• New events including “A Night
in Fabulous Las Vegas” at Harrah’sLas Vegas, which will transport youback to the Rat Pack’s vintageVegas days, and the new ARAYoung Professionals Networkreception at FIRST Food and Barthat’s for rental professionalsbetween the ages of 18 and 40 andtheir parents. • Other popular networking
events will return, such as LunchWith ARA, regional receptions, theinternational reception and theReception With a Purpose featuringthe ARA Foundation charity auc-
tion.• Events & Tents will have a new
full-day schedule on Feb. 9 and willinclude a Fabric Fashion Show thatmorning and a lunch session withwedding designer Sasha Souza, inaddition to 16 seminars specificallyfor those in party/special eventrental. A special reception will closeout Events & Tents at KeepMemory Alive, a Frank Gehry-designed venue that supports theCleveland Clinic’s Lou RuvoCenter for Brain Health.Registration for The Rental
Show opened Sept. 5, on the show’sWeb site, TheRentalShow.com. Aspecial Internet-only registrationrate of $119 per person for ARAmembers is available for a limitedtime. This rate is for full registra-tion, which includes the seminarson Feb. 10, 12 and 13; the keynotesession on Feb. 11; and the tradeshow Feb. 11 to 13.For more information, call
800/334-2177 or visitwww.TheRentalShow.com.
I’VE NEVER UNDERSTOOD WHY MY HUMAN WON’T LEAVE THE HOUSE WITHOUT HER LEASH. I THINK SHE’S AFRAlD OF GETTING LOST. BUT IT’S OK, I KIND OF LIKE SHOWING HER AROUND.
— HARPER adopted 08-18-09
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 39
Volvo Construction Equipment
MAXIMIZE EFFICIENCY. MINIMIZE COSTS.LET’S WORK.Volvo Construction Equipment offers equipment that’s ideal for quarry work. Our wheel loaders feature our exclusiveOptiShift technology for exceptional fuel efficiency, while our articulated haulers are designed for quick transport of aggregates.With the support of over 300 dealer locations across North America, the result is greater productivity for your crew – and ahigher earning potential for you.
Learn more about OptiShift by contacting a Volvo dealer near you. Visit volvoce.com/na today.
9601 BOGGY CREEKORLANDO, FL 407-659-8700
407-659-8720 (FAX)DAVIE
954-581-4744JACKSONVILLE904-737-6000
ORLANDO407-850-9614
TAMPA813-630-0077
FT. MYERS239-481-8554
FLORIDACOWIN
EQUIPMENT CO.,INC.
7950 PITTMAN AVE.PENSACOLA, FL
32534800-239-4736850-479-3004
CHESAPEAKE757-485-3314RICHMOND
804-266-0000ROANOKE
540-989-3750
WISE276-328-8027
MANASSAS, VA703-393-7344
WINCHESTER, VA540-722-3700
BIRMINGHAM800-239-2694
MOBILE800-223-6755MONTGOMERY800-239-6642
MADISON256-350-0006HUNTSVILLE800-239-7368
OXFORD800-917-7931
GEORGIAASC
CONSTRUCTIONEQUIPMENTSAVANNAH
912-964-8079BUFORD
678-318-9500FOREST PARK 770-319-0074
SOUTH CAROLINAASC
CONSTRUCTIONEQUIPMENTCOLUMBIA
803-791-0740PIEDMONT
864-704-1060NORTH
CHARLESTON843-414-1120
NORTH CAROLINAASC
CONSTRUCTIONEQUIPMENTASHEVILLE
828-687-0620CHARLOTTE
704-596-8283RALEIGH
919-661-8710GREENVILLE252-754-5280
TENNESSEEASC
CONSTRUCTIONEQUIPMENT
CHATTANOOGA423-308-7940KNOXVILLE
865-525-1845
FLORIDAFLAGLER CONSTRUCTION EQUIPMENT LLC
WWW.FLAGLERCE.COM
VIRGINIAMCCLUNG-LOGAN EQUIPMENT
COMPANY
ALABAMACOWIN EQUIPMENT CO., INC.
Page 40 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale $75
Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50
Scale ....................................................................................$75
Allis-Chalmers Yellow HD21 Dozer/Ripper, 1:50 Scale..$75
Allis-Chalmers HD-41 Dozer, 1:25 Scale ....................$200
Bantam C-35 Crawler Backhoe, 1:50 Scale ..................$60
Bantam C-35 Crawler Shovel, 1:50 Scale ....................$70
Bantam Shovel Mounted on a White Truck, 1:50 Scale $75
Bobcat E35 Compact Excavator, 1:25 Scale ................$50
Bobcat M400 Gold 50th Anniversary Skid Steer Loader,
1:25 Scale ........................................................................$35
Bobcat M610 Golden 50th Anniversary Skid Steer
Loader..............................................................................$25
Bobcat S175 Skid Steer Loader, 1:25 Scale ................$40
Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer
Set, 1:50 Scale ................................................................$60
Bobcat 773 50th Anniversary Skid Steer Loader, 1:25
Scale ................................................................................$25
Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ......$25
Bobcat 2008 Road Tour Semi Tractor/Trailer, 1:64 Scale ..
..........................................................................................$25
Case CX210B Excavator, 1:50 Scale ............................$40
Case 330B Articulated Truck, 1:50 Scale......................$40
Case 1850K Dozer, 1:50 Scale ......................................$40
Caterpillar AP600D Paver, w/ or w/out Canopy, 1:50 Scale ..
..........................................................................................$50
Caterpillar AP655D Paver, 1:50 Scale ..........................$50
Caterpillar D4E Track-Type Tractor, NZG, 1:50 Scale ..$80
Caterpillar D7E Track-Type Tractor, 1:50 Scale............$85
Caterpillar 140H Motor Grader, 1:50 Scale ..................$60
Caterpillar 297C Multi-Terrain Loader, 1:32 Scale........$45
Caterpillar 308C CR Mini-Excavator, 1:50 Scale ..........$50
Caterpillar 365B Excavator, 1:50 Scale ........................$70
Caterpillar 365C Front Shovel, 1:50 Scale ..................$110
Caterpillar 416 Backhoe/Loader, 1:32 Scale ................$75
Caterpillar 432E Backhoe/Loader, 1:50 Scale ..............$70
Caterpillar 906H Compact Wheel Loader, 1:50 Scale ..$45
Caterpillar 977 Traxcavator, 1:50 Scale ........................$55
Caterpillar 980G Wheel Loader, 1:50 Scale ..................$50
Caterpillar Military 924H Versalink Loader in Desert
Camouflage, 1:50 Scale ..................................................$45
Caterpillar Military 120M Motor Grader in Desert
Camouflage, 1:50 Scale ..................................................$70
Doosan Moxy MT31 Articulated Truck........................$115
Euclid R32 Off-Highway Truck, 1:50 Scale ..................$35
Hamm GRW280 Compactor w/Cabin ............................$75
Hamm 3307 Compact Roller, 1:34 Scale ......................$45
Hitachi EH700 Off-Highway Truck, 1:50 Scale..............$35
International "S" Series Dump Truck,1:25 Scale ......$125
International TD-15 Dozer, 1:50 Scale ..........................$60
International TD-20E Dozer, 1:64 Scale ........................$24
International 175 Crawler Loader w/Multi-Purpose
Bucket, 1:50 Scale ..........................................................$60
International TD-24 Military Dozer, 1:50 Scale ............$45
JCB 456 ZX Wheel Loader, 1:50 Scale ..........................$50
JCB 525-58 Compact Loader, 1:35 scale ......................$35
John Deere 200C LC Excavator ....................................$40
John Deere 624K Military Wheel Loader, 1:50 Scale ..$35
John Deere 872 GP Motor Grader, 1:50 Scale..............$50
Komatsu D51 PX Dozer, 1:50 Scale ..............................$65
Komatsu D375 Dozer, 1:50 Scale ..................................$90
Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$80
Komatsu HM250 Articulated Truck, 1:50 Scale ............$70
Komatsu PC14R Mini-Excavator, 1:32 Scale ................$40
Komatsu PC350LC Excavator, 1:50 Scale ....................$90
Komatsu PC2000-8 Front Shovel, 1:50 Scale ............$200
Komatsu SK1020 Skid Steer Loader, 1:25 Scale ........$35
Komatsu SK1026 Skid Steer Loader, 1:25 Scale ........$35
Komatsu WA470 Wheel Loader, 1:50 Scale..................$60
Komatsu WA500 Wheel Loader, 1:50 Scale..................$90
Komatsu WB146 Backhoe/Loader, 1:50 scale..............$60
Komatsu 475A-5EO Dozer, 1:50 Scale ........................$125
Kubota KX121-3 Compact Excavator, 1:24 scale ........$50
LeTourneau Military Super C Scraper, 1:50 Scale ......$35
Liebherr TA230 Articulated Truck, 1:50 scale ............$130
Link-Belt 800 X2 Excavator,1:50 Scale........................$240
Link-Belt 80100 Rough Terrain Crane ........................$190
Mack Granite MP Dump Truck w/ Beavertail Trailer, 1:50
scale................................................................................$110
Mack Granite MP w/ Bottom Dump Trailer ..................$85
New Holland 555 Skid Steer Loader, 1:25 scale ..........$30
Northwest 25-D Shovel, 1:50 Scale ..............................$85
Peterbilt 367 Dump Truck w/ Beavertail Trailer, 1:50 Scale
........................................................................................$120
Terex RC45 Rough Terrain Crane, 1:50 Scale ............$180
Vogele Vision 5200-2 Paver, 1:50 Scale ......................$140
Volvo A25D Articulated Truck, 1:50 Scale ....................$60
Volvo L70E Wheel Loader w/Attachments, 1:50 Scale$95
Volvo SD-122 Soil Compactor, 1:72 scale ....................$25
Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale ..........$70
All New in Box
CALL Toll Free
800-523-2200Ext. 197
Collections Wanted, I Buy Collections Shipping and Handling Included
Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell
Email – bmckeon@cegltd.com
CEG Scale Models470 Maryland Drive
Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
John Deere
400D
Articulated
Truck,
1:50 Scale$40
John Deere
624K
Wheel
Loader,
1:50 Scale$45
John Deere 850J
Military Dozer,
1:50 Scale $50
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 41
www.hyundaiamericas.com
Industry’s Best Total Coverage Warranty: 3-year / 3,000-hour full machine warranty & 5-year / 10,000-hour structural warranty
H
Y U N D A
I
W
AR R A N
TY
VALUECash is king – Make more money & spend less with Hyundai 9 Series machines.• More Standard Features
• Industry-Best Total Coverage Warranty
• Hi-mate Remote Management service – FREE for 3 years
• Industry-Leading Fuel Economy
• Industry-Leading Cycle Times
ALABAMAPittman tractor
co. inc.
Daphne, AL251/621-3555
ARKANSASEQUiPmEnt rESoUrcE
manaGEmEnt inc.
North Little Rock, AR501/223-8604
GrovE rivEr
Richmond Hill, GA912/756-7854
naSSEr HEavY EQUiPmEnt
Lawrenceville, GA770/995-6663
Cumming, GA770/889-5004
Villa Rica, GA678/941-1100
MISSISSIPPImiD SoUtH
macHinErY
Gulfport, MS228/867-1555
Jackson, MS601/948-6740
Tupelo, MS662/690-6553
TENNESSEEDiamonD
EQUiPmEnt
La Vergne, TN615/641-1100
GEORGIA
Page 42 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Page 44 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide
ALABAMA
ARKANSAS
FLORIDA
GEORGIA
TENNESSEE
LOUISIANA
MISSISSIPPI
©2012 CNH America LLC. All rights reserved. Case is a registered trademark of CNH America LLC. www.casece.com
CASE AUTHORIZED DEALERS
(256) 832-5053Oxford(334) 262-6642Montgomery(256) 350-0006Madison(205) 841-6666Birmingham
Cowin Equipment Company(251) 380-7800Mobile
1 Source Power & EquipmentALABAMA
CASE AUTHORIZED DEALERS
(256) 832-5053(334) 262-6642(256) 350-0006(205) 841-6666
Cowin Equipment Company(251) 380-7800
1 Source Power & Equipment
La VergneDiamond EquipmentLouisvilleJohnson CityContractors MachineryMillingtonAbby Equipment TENNESSEE
(615) 641-1100Diamond Equipment
(865) 982-6452(423) 975-9111
Contractors Machinery(901) 840-1200
Abby Equipment TENNESSEE
(479) 751-4242Springdale(501) 455-5955Mabelvale(479) 648-1600Fort Smith
Scott Equipment Company(870) 741-8900Harrison
Potter Equipment Company(870) 932-8383Jonesboro
Heartland EquipmentARKANSAS
(256) 832-5053
(479) 751-4242(501) 455-5955(479) 648-1600
Scott Equipment Company(870) 741-8900
Potter Equipment Company(870) 932-8383
(256) 832-5053
Baton RougeCrawler Supply CompanySulphurBroussardCLM Equipment CompanyLOUISIANA
JacksonLiles BrothersLa Vergne
(225) 357-7515Crawler Supply Company
(337) 625-5942(337) 837-6694
CLM Equipment CompanyLOUISIANA
(731) 423-1637Liles Brothers
(615) 641-1100
(561) 296-9710West Palm Beach(813) 621-5811Tampa(407) 888-0024Orlando(305) 821-2273Hialeah Gardens(239) 690-0661Fort Myers
Trekker TractorFLORIDA
(870) 772-0204Texarkana(479) 751-4242Springdale
(561) 296-9710(813) 621-5811(407) 888-0024(305) 821-2273(239) 690-0661
(870) 772-0204(479) 751-4242
MISSISSIPPI
ShreveportMonroeAlexandriaScott EquipmentHoumaM & L IndustriesSt. RoseLee Tractor Company
MISSISSIPPI
(318) 226-9696(318) 387-4160(318) 448-1647
Scott Equipment(985) 876-2280
M & L Industries(504) 467-6794
Lee Tractor Company
Vaughters Tractor Company(770) 684-7277Rockmart
Haney Farm & Ranch(478) 956-3833Byron
Central Georgia Equipment(912) 748-2828Pooler(770) 322-6960Conley(706) 737-9191Augusta
Border EquipmentGEORGIA
Vaughters Tractor Company(770) 684-7277
(478) 956-3833Central Georgia Equipment
(912) 748-2828(770) 322-6960(706) 737-9191
Lee Tractor CompanyJacksonJWH EquipmentBruceBatesvilleHood EquipmentLelandAyres - Delta ImplementWalnutSaltillo Abby Equipment
Lee Tractor Company(601) 974-8090
JWH Equipment(662) 983-7181(662) 563-4546
Hood Equipment(662) 686-2361
Ayres - Delta Implement(662) 223-5347(662) 869-2432
Abby Equipment
(229) 219-7641ValdostaEquipmentWallace Truck &
(770) 536-1455GainesvilleVaughters Tractor Company
(229) 219-7641Equipment
(770) 536-1455Vaughters Tractor Company
ClarksdaleStringer’s InternationalBiloxiLee Tractor Company
(662) 624 4305
Stringer’s International(228) 392-9922
Lee Tractor Company
devreses rthgil rl. ACLa LciremH AN2 C102©
ww. wCLa LciremH ANf Ck oramedard teretsiges a re isa. C
moc.ecesac.w
Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 45
NORTH CAROLINA
SOUTH CAROLINA
VIRGINIA
(803) 658-0200ColumbiaHills MachinerySOUTH CAROLINA
(252) 752-7145GreenvilleHills MachineryNORTH CAROLINA
(803) 658-0200
SOUTH CAROLINA
(252) 752-7145
NORTH CAROLINA
(540) 662-8266Clear Brook
Vernon E. Stup Company(540) 942-2610Waynesboro(540) 966-0151Cloverdale(804) 752-8333Ashland
Lawrence EquipmentVIRGINIA
(843) 225-9377North Charleston
(540) 662-8266
Vernon E. Stup Company(540) 942-2610(540) 966-0151(804) 752-8333
(843) 225-9377
Ditch Witch, Charles Machine WorksUnveil RT80 Quad Ride-On TrencherThe Ditch Witch RT80 Quad is a
heavy-duty ride-on trencher andvibratory plow designed to providethe power, durability, stability andtraction contractors need for bothshort and long utility installations.The RT80 Quad is completely
designed and manufactured by TheCharles Machine Works (CMW) toprovide traction and performance onrough and uneven terrain. With itspower and compact footprint, theRT80 Quad can handle any type ofutility installation, short or long drops,on either tight or wide-open job sites,according to the manufacturer.The 83-hp (62 kW) RT80 Quad
features a three-speed, shift-on-the-flyground drive that provides the powernecessary to tackle any job site withthe machine’s vibratory plow, travers-ing trencher, saw or backhoe attach-ments.Equipped with a heavy-duty under-
carriage and components, the RT80 Quad is ideal forinstalling utilities in some of the toughest job site conditions.Its axle capacity offers static load rating of 39,000 lb. (17,690kg) and a 30,742 lb. (13,944 kg) of breakout. The machine’strack frames pivot about the centerline of the axle, a designthat provides enhanced machine stability especially inmuddy conditions or when applying very high torque to pullthrough hard ground. And the chevron-pattern design of theRT80 Quad’s track system helps reduce mud buildup, result-ing in improved traction in wet conditions and on slopes,according to the manufacturer. The heavy-duty nature of RT80 Quad extends to its
attachments and other working parts. The heavy-duty H810centerline trencher is capable of trenching up to 24 in. (61cm) wide. The RT80 Quad’s backfill blade arm helps pro-vide maximum lift and features the same heavy-duty designas the Ditch Witch RT115 Quad, for strength and durability.Other standard features of the RT80 Quad include rear
steering, which helps improve maneuverability on tight jobsites, and cruise control, which enables the operator to main-tain optimal digging performance regardless of ground con-ditions.For more information, call 800/654-6481 or visit
www.ditchwitch.com.
The Ditch Witch RT80 Quad is a heavy-duty ride-on trencher and vibrato-ry plow for both short and long utility installations.
The 83-hp (62 kW) RT80 Quad features a three-speed, shift-on-the-fly ground drive that provides the powernecessary to tackle any job site with the machine’s vibratory plow, traversing trencher, saw or backhoeattachments.
Page 46 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide
Tramac by Montabert Debuts FourNew Plate Compactor/Driver ModelsTramac by Montabert
released four new plate com-pactor/driver models toexpand the Tramac productline and make compact soilstrenches, seawalls, slopesand foundations a quick, safeand efficient process.Featuring a flat top mount
design, the Tramac platecompactors can easily bemounted to different carriersup to 100,000 lbs. The flat-top design allows a bracketcap to be added to the attach-ment based on the specificmachine being used. Fouroutboard shock mounts dis-tribute vibrations evenlywhile keeping the attach-ment level, improving com-paction efficiency andextending component life. Astandard flow control valveand pressure relieve valveprevent over-speeding,which can lead to poor com-paction and reduce bearinglife.Applications for the plate
compactor attachmentsinclude compacting trench-es, gravel or asphalt; foot-ings slab areas and slopes.The plate compactor also isvery efficient for seawalls,sheet pile and posts driving.An excavator-mounted platecompactor attachment pro-vides more powerful com-paction force than hand-operated compactors andreduces the need for workersin the trench. The plate com-pactor operating systemcombines maximum eccentric weight with the exact propor-tions of amplitude and vibration frequency necessary to gen-erate the most effective centrifugal force, according to themanufacturer.Stephane Giroudon, brand manager stated, “We are very
excited about the release of the new Tramac by Montabertcompactor line. This is a completely new and innovativedesign that includes a flow control and a pressure relievevalve. It does not require a case drain for an easy installationon any excavators and backhoe loaders. The addition lendsus the opportunity to display our company’s capabilities, toyet again, marry innovation and design while simultaneous-ly upholding the legacy of delivering a reliable and qualityproduct to our extensive network of dealers.” The PCT 34 is approved for carrier weight ranging from
5,512 to 14,330 lbs. (2,500 to 6,500 kg). The attachment’s
dynamic force is 3,400 lbs. and the compaction frequency is2,100 vibrations per minute (vpm).The PCT64 is approved for carrier weight ranging from
9,920 to 33,070 lbs. (4,500 to 15,000 kg). The attachment’sdynamic force is 6,400 lbs. and the compaction frequency is2,000 vibrations per minute (vpm). The PCT114 is approved for carrier weight ranging from
15,870 to 55,115 lbs. (7,198 to 25,000 kg). The attachment’sdynamic force is 11,350 lbs. and the compaction frequencyis 2,000 vibrations per minute (vpm). The PCT220 is approved for carrier weight ranging from
54,000 to 143,300 lbs. (25,000 to 65,000 kg). The attach-ment’s dynamic force is 22,000 lbs. and the compaction fre-quency is 2,100 vibrations per minute (vpm). For more information, visit
www.tramacbymontabert.com.
Featuring a flat top mount design, the Tramac plate compactors can easily bemounted to different carriers up to 100,000 lbs.
Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 47
Page 48 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide
ALABAMABobcat of Mobile
Mobile
lylemachinery.com
Bobcat of OxfordOxford
256-831-1870bobcatofoxford.com
Bobcat of the WiregrassDothan
334-792-5121bobcatofthewiregrass.com
FLORIDABobcat of Central Florida
Tampa Bay
Orlando407-273-7383cfbobcat.com
Bobcat of Fort MyersFort Myers
239-334-4987
Naples239-530-0406
bobcat.wej-fl.com
Bobcat of Metro DadeHialeah Gardens
bobcatofmetrodade.com
Bobcat of JacksonvilleJacksonville904-288-9181bobcatjax.com
Bobcat of Palm BeachWest Palm Beach
Pompano Beach954-763-9880
bobcat.sbequipment.com
Novia Industries LLCOcala, FL
352-789-6818noviaindustries.com
GEORGIABobcat of Atlanta
Atlanta770-242-6500
Marietta770-850-1443
bobcatofatlanta.com
Bobcat of SavannahBloomingdale
seequipinc.com
Bobcat of ThomasvilleThomasville229-225-9644
bobcatofthewiregrass.com
Rhinehart Equipment CompanyRome
706-232-8962 bobcat.rhinehartequipment.com
MISSISSIPPIBobcat of Gulfport
Saucier228-832-7575
lylemachinery.com
NORTH CAROLINABobcat of Charlotte
Charlotte704-343-2200rsbraswell.com
Triangle Equipment Co.Morrisville
Garner
Wilmington
ncbobcat.com
SOUTH CAROLINABobcat of Greenville
Piedmont
Charleston
Columbia
Spartanburg
seequipinc.com
Triangle Equipment Co.Myrtle Beach
ncbobcat.com
Bobcat® and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various other countries. ©2012 Bobcat Company. All Rights Reserved. | 0912603
ON
CHBOBCATATT
ONE F T OF THES
HECK OUT TH COMPAPACT TSE AUTHORI
HE LINEUP OTRACK LOADIZED BOBCATA
P OFDERS AT ATATT DT DEALERS.
52
cboBmelyl
cboBAL
078-1138-65dorfxO
drofxf Ot oacomc.yrenihcam
lebioMelibof Mt oac
AMAABAL
a,lacOsudnIa ivoNipmuqesb.tacbob
3674-59onmpaoP
lm Bat PsWea Pf otcabBo
L Fa,CLs Leirtsmoc.tneipm
8098-3hcae Bo
hcaelm Bch Beamla
eillvsirroMpmeiuqEelgnairT
mocll.ewsarsbr002-2343-407
ettlorahColr Chaf otcabBoIOLRCAHTRON
. Cotn
ettoANI
Tt oacboB
F
otacbob33
t oacboBcbob
ya BmpaaTaidrolFl artnef Ct o
AIDROLF
moc.ssargrewiehtfo1215-9274-3
anhtoDssargerie Whf tt o
mocd.orfxofotac
tlaafotacbob0-580-77ieraM2-24077
anltAf At oacboBRGOEG
tsudinaiovn978-523a,lacO
mco.atntla34410-
attie0056-2
atanatnaltf A
AIRG
moc.seirt8186-9
L Fa,
tnodmiePvneerGf t oacboBILORACH TUOS
mo.ctacbobcn
notginmliW
renarG
ellivANI
tcabBobob32
392FacboBfbc04
edaDort Mef otmoc-fl.jew.tacb
0640-0359-3seplaN
7894-43-339sreyt MroF
sreyt MroFf t oamoct.acbofb3873-732-70
ondalOr
23260mRopmeiuqEtrhaenihRwiehtfotacbob
522-922samohThf Tt oacboBnipiuqees
nimoolB Sf otcabBo
62892em
ynpam Cotnpmemoc.ssargre
4469-5eillvs
ellivsamohmo.ccn
elgdanhnanava S
hcaee BltryMpmeiuqEelgnairT
mo.ccnipiuqees
grubantrapS
aiblumoC
on tselrahC
. Cotnm
ob09aJtcabBotacbob
aHi
moc.xjaatcbo1891-828-40eillvnoskca
ellivnosck Jaf omco.edarodtemfo
snedra Gahle
nihcamelyl238-822ciuaSf otacobBSISSIM
etraheinhr.tacbob232-607
omc.yren7575-2
ercitorpfluG
IPPISS
moc.tneipmuqe6289-2
mo.ctacbobcn
seirtnuor cehts ouoirad vnagot lacboe Bhd tn® atacboB
306219. | 0devreses Rthgil Rl. Aynapmot Cacbo2 B102. ©
etatd Setine Uhn ty inapmot Cacbof Bs okramedard teretsigee rro ag
se
Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 49
ONE VS MANYCOMPACT TRACK LOADERS FACE OFF
Scan the code. Watch the videos. See compact track loaders go head to head.
Visit BobcatAdvantage.com/CTLfaceoff15 to see more and find out who comes out on top.
www.BobcatAdvantage.com/CTLfaceoff15
Page 50 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide
Large in stock inventoryBackhoe conversions also available
Soft Ride Solid Tires For
Skid Steers and Wheel LoadersExtra deep lugs for tractionTough rubber compounding
www.advancetires.com • (800) 445-6647M e n t i o n t h i s a d f o r d i s c o u n t e d s h i p p i n g
Due to a number of recent enhance-ments, JCB’s 8055 RTS mini-excavatornow combines even more power andmaneuverability into one compact pack-age. The 8055 RTS weighs in at 12,125lbs. (5,500 kg), improving its lift capacityup to 10 percent and enabling operators tocomplete jobs in less time. A new 44.4 hp(33 kW) Perkins engine decreases fuelconsumption up to 10 percent, reducingoperating costs. In addition to the 8055’sstandard 75 in. (190.5 cm) dipper andoptional 59 in. (150 cm) dipper, a thirddipper — the 68 in. (173 cm) — is nowavailable. This new dipper increases themachine’s stability when using tiltingbuckets and quick hitches, according tothe manufacturer.
The 8055 RTS continues to offerimpressive break-out forces and high lev-
els of tractive effort and trackingspeeds. A dump height of 13 ft. 6 in.(4 m) and dig depth of 12 ft. 4 in. (3.7m) make the 8055 RTS more versa-tile on the job site. Single-actingauxiliary pipework to the dipperpowers breaker attachments,while optional double-actingpipework lets users switchbetween single and double.Straight-line tracking gives pre-cise control when positioning theexcavator next to obstacles orduring loading and unloading,but also allows safe travelwithout veering off when aservice is operated.
For more information,call 912/447-2000 orvisit www.jcbna.com.
The 8055 RTS weighs in at 12,125 lbs.(5,500 kg), improving its lift capacityup to 10 percent and enabling opera-
tors to complete jobs in less time.
JCB’s New 8055 RTS Adds More Power, Maneuverability
Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 51
AlabamaCOWIN EQUIPMENT CO. Birmingham (205) 841-6666Huntsville (256) 350-0006Mobile (251) 633-4020Montgomery (334) 262-6642Oxford (256) 832-5053
ArkansasTHE G.W. VAN KEPPEL CO. Little Rock (501) 945-4594 Van Buren (479) 474-5281
FloridaCOWIN EQUIPMENT CO. Pensacola (850) 479-3004
GS EQUIPMENT Davie/Ft. Lauderdale (954) 327-8808Ft. Myers (239) 334-6063Jacksonville (904) 268-4400Orlando (407) 859-9160Tampa (813) 248-4971
GeorgiaCOWIN EQUIPMENT CO. Mableton (404) 696-7210
Louisiana CLM EQUIPMENT CO., INC. Broussard (337) 837-6693Sulphur (337) 625-5942
HEAVY MACHINES, INC. Shreveport (318) 621-0854
QUEST CONSTRUCTION EQUIPMENT Gonzales (225) 450-6425Lake Charles (337) 436-7726St. Rose (504) 467-7663
North CarolinaCCS EQUIPMENT SALESYoungsville (919) 556-9110
MAY HEAVY-EQUIP RENTALS & SALES Lexington (866) 629-3784
South CarolinaMAY HEAVY-EQUIP RENTALS & SALESColumbia (888) 865-1002
TennesseeCUMBERLAND TRACTOR & EQUIP, LLCNashville (615) 865-7800
FINLEY LLC a DIV of HMI, INC. Gray (423) 282-5462
HEAVY MACHINES, INC. Memphis (901) 260-2200
Virginia ELLIOTT & FRANTZ, INC. Manassas (703) 257-2381
LINK-BELT MID ATLANTIC Ashland (804) 798-2290Chesapeake (757) 485-4485
Puerto Rico PUERTO RICO WIRE PRODUCTS, INC. San Juan (787) 288-8080
Page 52 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide
BIG RESULTS.
www
.jcbna.comwwww.jcbna.com
VISIT THE JCB DEAL
LER NEAREST OU Y YOU
MacKinnon JCB2230 N US Hwy 301Tampa, FL 33619813-621-4671
1915 N Orange Blossom TrOrlando, FL 32804877-205-6098
6907 Broadway AveJacksonville, FL 32254877-218-56382755 Marshall DrTifton, GA 31793877-462-3250www.mackinnonjcb.com
JCB of Alabama8920 Weaver AveLeeds, AL 35094866-480-6125
791 Anderson RdMontgomery, AL 36110866-954-6522
www.jcbofalabama.com
Valley JCB(a division of Valley Supply & Equipment)
8192 Euclid CtManassis Park, VA 20111703-330-5579
www.valleyjcb.com
JCB of Nashville618 N Main StGoodlettsville, TN 37072615-851-4345
181 Industrial BlvdLaVergne, TN 37086615-793-8100
www.tuffequipco.com
JCB of Chattanooga1609 Church RdChattanooga, TN 37421423-899-1219
www.jcbofchattanooga.com
JCB of South Florida(a division of Florida Coast Equipment)
9775 W Boynton Beach BlvdBoynton Beach, FL 33437561-369-0414
15900 Westpark LnFort Pierce, FL 34945772-461-1003
www.jcbofsouthflorida.com
JCB of Georgia1008 E Hwy 80Pooler, GA 31322888-431-0130
2679 Barrett Lakes BlvdKennesaw, GA 30144678-594-5400
4008 Mike Padgett HwyAugusta, GA 30906888-431-0130
www.jcbofgeorgia.com
Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 53
COMPACT MACHINES.
THE JCB RANGE OF COMP
skid steer and tracked loader with side entry is the safest most productive machine on the work site.
Whatever your application requires, JCB has the model to get the job done. The revolutionary JCB
EQUIPMENTCAAC NGE OF COMP PA
skid steer and tracked loader with side entry is the safest most productive machine on the work site.
Whatever your application requires, JCB has the model to get the job done. The revolutionary JCB
T EQUIPMEN
skid steer and tracked loader with side entry is the safest most productive machine on the work site.
Whatever your application requires, JCB has the model to get the job done. The revolutionary JCB
skid steer and tracked loader with side entry is the safest most productive machine on the work site.
Whatever your application requires, JCB has the model to get the job done. The revolutionary JCB
/JCB
.jcbna.com or the dealer nearest you to learn more!Visit www w.jcbna.com or the dealer nearest you to learn more!
environment, perfect for tight spaces.
The JCB range of zero tail-swing mini excavators provide a spacious, comfortable operator
HAMERICAT/JCBNOR/JCBNA
.jcbna.com or the dealer nearest you to learn more!
environment, perfect for tight spaces.
The JCB range of zero tail-swing mini excavators provide a spacious, comfortable operator
HAMERICA
.jcbna.com or the dealer nearest you to learn more!
The JCB range of zero tail-swing mini excavators provide a spacious, comfortable operator
’s The JCB range of zero tail-swing mini excavators provide a spacious, comfortable operator
Page 54 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide
H&E EquipmentServiceswww.he-equipment.comARLittle Rock501-568-7867800-632-0577Springdale479-927-1672888-200-6343LAAlexandria318-443-7173800-249-8485 Baton Rouge225-356-6113800-872-1305 Bossier City318-746-5272800-643-2844 Broussard337-837-9600877-463-9914 Gonzales225-644-2328888-450-0723 Kenner504-467-5906800-203-1869 Sulphur337-528-2661800-258-1614
Linder IndustrialMachinerywww.linderco.comFLFt. Myers239-337-1313Jacksonville904-786-6710Ocala352-629-7585Orlando407-849-6560Pembroke Pines954-433-2800Plant City813-754-2727West Palm Beach561-863-0570NCAsheville828-681-5172Charlotte704-376-7554Greenville252-695-6200High Point336-665-0110Raleigh919-851-2030
Wilmington910-254-2031SCColumbia803-794-6150Greer864-877-8962North Charleston843-552-0095
Lyle Machinery Co.www.lylemachinery.comMSColumbus662-243-2152Hattiesburg601-296-7556Jackson601-939-4000Magnolia601-783-2111Saucier228-832-7575
Power Equipmentwww.powerequipco.comMSSaltillo662-869-0283TNChattanooga423-894-1870Kingsport423-349-6111Knoxville865-577-5563LaVergne615-213-0900Memphis901-346-9800
Every Komatsu Tier 4 Interim construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary KDPF exchanges. With Komatsu CARE you can:
• Lower your cost of ownership• Increase equipment uptime and reliability• Protect the value of your Tier 4 capital investment
It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers.
To learn more about Komatsu CARE
contact your Komatsu distributor or scan
this QR code with your smart phone.
GO WITH KOMATSU... AND GET THE ONLY
TIER 4 INTERIM EQUIPMENT WITH
COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.
SOUTHEAST KOMATSU DISTRIBUTORS
T M
s
W
8
8
8
H
W
8
8
W
8
B M
P
2
I
F
8
A
8
O
E55 Features ‘Finger-Tip’ Control forBoom Swing, Auxiliary Hydraulics
The E55 conventional tail swingcompact excavator has an operatingweight of 12,478 lbs. (5,660 kg), anoverall width of 77.2 in. (196 cm) andis powered by a 48.8 hp (36 kW) tur-bocharged diesel engine that is interimTier IV compliant. The unit’s 13.4 in.(34 cm) of tail overhang helps it deliv-er increased lift capacity and slew per-formance in the most demandingapplications. The E55 is standard equipped with
a TOPS/ROPS certified cab, includingfull climate control (HVAC), and adeluxe high-back cloth suspensionseat with retractable seat belt.Additional amenities in the “radioready” cab include 12V power port,adjustable armrests, lockable toolboxand a convenient beverage holder. Within the operator’s area, the E55
features convenient “finger-tip” con-trol for boom swing and auxiliaryhydraulics functions. Large travelpedals fold up to provide more floorspace while flush-mounted floor matsmake cleanup easier. A keyless startsystem that discourages theft and van-dalism is available as an option.The E55 comes with an auto-idle
feature which, if activated by the oper-ator, automatically returns the engine
to idle if excavator functions are notused for a period of four seconds, sav-ing fuel and reducing job site noise.The engine automatically returns tothe preset throttle position as soon asthe operator starts working again. Forprecise engine speed adjustments, anew easy-to-use rotary knob has beenadded to the controls.As with all other M-Series compact
excavators, a load-sensing pistonpump and closed center valve systemprovide precise control of themachines travel and work-group func-tions. The E55’s hydraulic systemdelivers “loaded” cycle times and a9,442 ft.-lb. of bucket breakout forcefor productivity. Work-group cylin-ders offer end-of-stroke cushioningfor smooth operation.An automatic, integrated slew
brake holds loads still and steady onslopes for more accurate placement.The need for the operator to manuallyengage the slew brakes during trans-port is eliminated, making it easier toload and position the machine fortransport. Like all Bobcat M-Series compact
excavators, the E55 features an X-frame undercarriage that providesimpressive ground clearance and read-
ily sheds debris for reduced cleanuptime. Drive motor covers are insetwithin the motor wrap-arounds to pro-tect them from potential damage.Integrated into the undercarriage, con-venient tie down points simplify trail-er loading for transport, according tothe manufacturer.In addition, Bobcat’s in-track swing
frame keeps the swing castings andcylinders within the width of thetracks when digging in an offset posi-tion, helping the operator dig flushagainst an obstacle. This feature mini-mizes the chance of inadvertent con-tact with surrounding obstacles, ulti-mately reducing operating costs ofrepair to the machine or adjacentstructure. Other popular options for the E55
include “pad-ready” steel tracks, rub-ber street pads, a hydraulic angleblade, second auxiliary hydraulics,hydraulic clamp and hydraulic X-Change attachment mounting systemsfor quickly switching between the 16attachments approved for use on themachine.For more information, visit
www.bobcat.com/excavators/.
The E55 has an operating weight of 12,478 lbs. (5,660kg), an overall width of 77.2 in. (196 cm) and is pow-ered by a 48.8 hp (36 kW) turbocharged dieselengine that is interim Tier IV compliant.
Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 55
COMPACTEXCAVATORS
Three track options for any terrain: rubber, steel and roadliner
Boom offset allows digging parallel to foundations or fences
Spacious and comfortable contour cab design for true tight-tail versatility
KOMTRAX wireless equipment-monitoring system with no monthly fees
The Komatsu PC88MR-8 takes the power and quality reputation of its larger siblings into tight places. The advanced Pilot Proportional Control (PPC) joysticks provide smooth, precise controls and five working modes enable you to take command of every project.
www.komatsuamerica.com
From Komatsu - The Compact Experts
.komatsuamerica.comwww
.komatsuamerica.com
Rish Equipment Companywww.rish.comMDFrostburg301-689-2211VABealton540-439-0668Chesapeake757-485-2100Chester804-748-6411Coeburn276-395-6901 Opal540-439-0668Salem540-380-2090Staunton540-887-8291WVBeckley304-255-4111Bluefield304-327-5124Bridgeport304-842-3511Logan304-752-9313St. Albaus304-755-3311
Tractor & EquipmentCompanywww.tractor-equipment.comALAlabaster205-621-2489Anniston256-831-2440Birmingham205-591-2131Decatur256-355-0305800-321-6865Dothan334-678-1832Mobile251-457-8991800-233-7213Montgomery334-288-6580800-832-9563Shoals Area256-383-5666Tuscaloosa 205-752-0621FLPanama City850-763-4654Pensacola 850-505-0550GAAlbany229-435-0982800-733-0962Atlanta404-366-0693Augusta706-798-7777800-659-3090Calhoun706-879-6200800-827-3072Columbus706-562-1801877-307-6439Hoschton706-654-9850888-334-9850Kennesaw678-354-5533Macon478-745-6891Savannah912-330-7500800-827-1405
T M
H
.komatsuamerica.com/komatsu-carwww
e .komatsuamerica.com/komatsu-car
Page 56 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide
TRACK INSTALLATION KIT
Install RubberTracks Fast & Easy
With Hydraulic Tools,Fits Most All CAT,
ASV / TEREX CompactLoaders
Replacement/RebuildableAxle Assemblies
SUPER HUB 2
• Grease Filled, Not Oil• Used with OEM or Bair’s Alloy Wheels
• Rebuildable• Idlers Have Double Stacked Bearings
• Stop Wheel Failures!• CAT 247/257 A&B, ASV/TEREX 30/50/60 Models
• Forget Hubbed Wheels - Upgrade To Bolt-On Alloy Wheels• 10% Larger Axle Than OEM & 43% Larger Bearings
• Grease Packed / Preload Adjustable• No Inner Sleeves, Bushings, Spacers, Seals Or O-Rings!
TOLL FREE 855-575-LUGS (5847)www.bairproducts.com
email: info@bairproducts.com
STOP TRACK DERAILMENTS ON COMPACT TRACK LOADERS• CAT 279C/289C/297C/299C LOADERS
• Turn One & Two Flange Idlers Into Three Flange Idlers
• Capture The Track’s Cleats At All Four Sides
• Spread The Machine’s Weight, Torque Forces Out And Over The Drive Cleats
NEW ON THEMARKET
NEW ON THEMARKET
NEW ON THEMARKET
DON ALLISON EQUIPMENT, INC.233 Melville Road Arley, AL 35541
800-669-6450205-387-1600
Fax: 205-387-1668
This bracelet was a gift Amber Apodoca
received from the center where she helped teens with
drug and alcohol problems. She was wearing it
when an underage drunk driver took her life.
Friends Don’t Let Friends Drive Drunk.
Pho
to b
y M
icha
el M
azze
o
Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 57
Contact us today.
Hauling pallets of pavers, rocks,trees, or retaining-wall block?Stick a fork on a 244J Compact Loaderand the job gets done — quickly andefficiently. This tight-turning, heavy-lifting loader serves up best-in-classmaneuverability, travel speed, breakoutforce, reach, and stability. Switch to abucket to move gravel, sand, mulch, orsnow. Unique stereo steering delivers a20-percent tighter turning radius — forfaster cycle times and less materialspillage around the equipment yard orgarden center. Customer-inspiredenhancements include a spacious, sound-suppressed cab and unrestrictedall-around visibility.
When you’re ready to feast on more productivity, order up a John Deere 244J.
Albany, GA229/888-1212
Atlanta, GA404/691-9445Grovetown, GA706/855-5440Columbus, GA
706/687-3344Braselton, GA
770/965-1889Macon, GA
478/788-1586Adairsville, GA770/773-9857
Brunswick, GA912/264-6161Savannah, GA
912/964-7370Dothan, AL
334/794-8691Troy, AL
334/566-4181Perry, FL
850/584-9200Tallahassee, FL850/575-5600
Aynor, SC843/358-5688
West Columbia, SC803/794-9340Simpsonville, SC864/963-5835
Ladson, SC843/572-0400
Andrews, SC843/221-4940Walterboro, SC843/539-1420
R.W. MooRE
EQUIP. co.
Main office
Garner, NC919/772-2121
Ahoskie, NC252/332-5550Hope Mills, NC910/424-1200New Bern, NC
252/638-5838Greenville, NC
252/758-4403Castle Hayne, NC910/675-9211
Ashland, VA804/798-6001
Manassas Park, VA703/631-8500Winchester, VA540/667-9777Richlands, VA
276/596-9440Asheville, NC
828/667-0176
Charlotte, NC704/597-0211800/532-6797Greensboro, NC336/668-2762800/632-0376Mt. Gilead, NC910/439-5653800/692-9175
Salem, VA540/380-2011
coASTAl
EQUIPMENT coRP.
Main office
504 South Military Hwy.Virginia Beach, VA 23464
757/424-1900Yorktown, VA
757/898-1900
flINT EQUIPMENT coMPANy JAMES RIVER EQUIPMENT
Page 58 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide
DITCH WITCH OF TENNESSEEwww.ditchwitchtn.com
Nashville140 Charter Place
LaVergne, TN 37027615-793-7576800-449-4814
KnoxvilleLouisvile, TN 37777
865-970-2840800-445-4814
GROWERS EQUIPMENT CO.www.growersequipment.com
2695 Davie Rd.Davie, FL 33314954-916-1020
Miami (Doral), FL(parts only)
305-592-7892
TRACTOR & EQUIPMENT CO.www.tractornequipment.com
2006 Northwest Blvd.Newton, NC 28658
828-695-1025
CHARLOTTE TRACTORwww.charlottetractor.com
1700 Starita Rd.Charlotte, NC 28206
704-596-8900800-532-1011
GREENSBORO TRACTORwww.greensborotractor.com2820 S. Elm-Eugene StreetGreensboro, NC 27406
336-273-3606
EVERYTHING YOU VALUE
Case Adds Larger Engines, Tier IVUpgrades to Alpha Skid Steer ModelsCase Construction Equipment
recently upgraded its largest AlphaSeries skid steers and compact trackloaders, which now meet emissionrequirements for Tier IV Interim certi-fication.The Case SR250 and SV300 skid
steers and TR320 and TV380 compacttrack loaders now feature 90 hp (67kW), 3.4 L Case diesel engines withthe full high-pressure common rail(HPCR) design typically used in largerconstruction equipment. To meet TierIV Interim emission requirements,Case equipped the models with cooledexhaust gas recirculation (CEGR)technology, including diesel particulatefilter and diesel oxidizing catalyst.Case selected CEGR technology asmost appropriate for skid steers andcompact track loader applications,where the engine typically runs at ahigh RPM.Rated operating capacities are 2,500
lb. (1,135 kg) for the SR250; 3,000 lb.(1,361 kg) for the SV300; 3,200 lb.(1,451 kg) in the TR320, and 3,800 lb.(1,723 kg) for the TV380. The Case 3.4 L engine in the
upgraded Alpha Series skid steers andcompact track loaders features a newpiston design — specifically engi-neered for use in high pressure com-mon rail (HPCR) fuel systems — thatpromotes thorough combustion, opti-mizes power and fuel efficiency. The electronic engine controls mon-
itor EGR sensors and other inputs todetermine diesel particulate filter(DPF) system regeneration needs.
Dozer-Style UndercarriageAs in previous Case models, the
upgraded Case TR320 and TV380compact track loaders feature a dozer-style undercarriage, engineered to holdfast on steep slopes and take commandof muddy or sandy terrain. The under-carriage has a rigid track frame withfewer moving parts, so it is moredurable and easier to maintain thansuspension track systems, according tothe manufacturer. For more information, visit
www.casece.com.
The Case SR250 and SV300 skid steers and TR320 and TV380 compacttrack loaders now feature 90 hp (67 kW), 3.4 L Case diesel engines withthe full high-pressure common rail (HPCR) design typically used in larg-er construction equipment.
The upgraded Case TR320 and TV380 compact track loaders feature adozer-style undercarriage, engineered to hold fast on steep slopes andtake command of muddy or sandy terrain.
Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 59
www.kubota.comOptional equipment may be shown.
©Kubota Tractor Corporation, 2010
Now available with a pressurized comfort cab. Schedule your Kubota SVL Series demo today.
BALDWIN TRACTOR & EQUIPMENT
www.baldwintractor.com22463 State Highway 59SRobertsdale, AL 36567
251-947-4171
JONESBORO TRACTOR SALES INC.
5312 Stadium Blvd.Jonesboro, AR 72402
888-931-9151870-935-9151
MASON TRACTOR CO.www.masontractorco.com1050 Appalachian HwyBlue Ridge, GA 30513
706-632-3777McDonough, GA 30253
770-957-3370
Cumming, GA 30040770-887-6119
TYLER EQUIPMENT CO., INC.2613 Main St.
Conway, SC 29516843-248-5294
COASTAL EQUIPMENT SYSTEMS
www.coastalequipmentsystems.com
5287 New Kings RoadJacksonville, FL 32209
904-924-9624
CREEL TRACTOR CO.www.creeltractor.com3771 Palm Beach Blvd.Fort Myers, FL 33916
239-694-2185Fax: 239-694-6059
BROOKS SALES INC.www.brookssales.com3144 Highway 74 EastMonroe, NC 28112
704-233-4242
FUTCH’S TRACTOR DEPOTwww.futchstractordepot.com
8515 S.R. 207 NorthHastings, FL 32145
904-692-3673Fax: 904-692-2842
STEVENSON TRACTOR, INC.www.stevensontractor.com1792 S. Military Hwy.Chesapeake, VA 23320
757-420-4220
Page 60 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide
Vermeer SoutheastSales
& Service, Inc.Boynton Beach, FL
1060 West Industrial AvenueBoynton Beach, FL 33462
561-742-7400 • Fax: 561-742-7448
Clearwater, FL12785 N 44th St.
Clearwater, FL 33762727-299-9207 • Fax: 727-299-0166
Ft. Myers, FL2231 Flint Dr.
Ft. Myers, FL 33916941-337-5900 • Fax: 941-337-5901
Jacksonville, FL11550 Philips Hwy.
Jacksonville, FL 32256904-262-4400 • Fax: 904-262-0619
Orlando, FL4559 Old Winter Garden Rd.
Orlando, FL 32811407-295-2020 • Fax: 407-293-8087
Miami, FL13301 S.W. 131st Str.Miami, FL 33186-5816
305-234-4556 • Fax: 305-234-5561
Pensacola, FL6691 Mobile HighwayPensacola, FL 32526
850-944-8110 • Fax: 850-944-8166
Tallahassee, FL31767 Blue Star HwyMidway, FL 32343
850-575-1556 • Fax: 850-575-5718
Marietta, GA1320 Gresham Rd.Marietta, GA 30062
770-973-8811 • Fax: 770-973-7829
Savannah, GA411B Telfair Rd.
Savannah, GA 31415 912-238-1300 • Fax: 912-238-1003
Birmingham, AL2950 Pinson Valley Parkway Birmingham, AL 35217
205-841-9895 • Fax: 205-841-9841
Decatur, AL314 Beltline Rd
Decatur, AL 35601 256-341-0700 • Fax: 256-341-0773
Vermeer Puerto RicoAve. Cementerio NacionalLocal #49, Hato Tejas
Bayamon, Puerto Rico 00961 787-780-0533 • Fax: 787-780-1501
Vermeer of Texas-Louisiana8272 Rushing Road
Denham Springs, LA 70726225-665-7900 • Fax: 225-665-7979
Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 61
2238 Pinson Valley PkwyP.O. Box 10624
Birmingham, AL 35202205.841.6666
35 Schillinger Road, NP.O. Drawer 29
Mobile, AL 36601251.633.4020
3120 Old Hayneville Rd. P.O. Drawer 9367
Montgomery, AL 36108334.262.6642
15101 Alabama Hwy 20 Madison, AL 35758
P.O. Box 6192 Huntsville, AL 35824
256.536.9390www.cowin.com
1501 Highway 78 EastOxford, AL 36203
256.832.50537950 Pittman Ave.
Pensacola, FL 32591850.479.3004
Cowin Equipment Company, Inc. ACT Construction355 Business Park DriveWinston-Salem, NC 27107
800.849.54383001 Boundary St.
Wilmington, NC 28405800.849.5438
www.actforklift.com
Cobb County Tractor1520 Cobb Parkway N.Marietta, GA 30062
770.427.1348www.cctractor.com
Perimeter Takeuchi3022 Peachtree Industrial Blvd.
Buford, GA 30518770.614.5730
Page 62 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Topcon GPS-Equipped Iron Gets Workout From Attendees
(L-R): Scott Knox and Craig McBeth, both of John Deere; and DrewBouche and Steve Surrett, both of Lane Construction, Raleigh, N.C.,all enjoyed the day out of the office shooting.
This John Deere 764 dozerequipped with Topcon 3D MC²was tested out by a steadystream of operators.
About to take the first shots for the day are (L-R) Mike Cooney, Triton Sitework DevelopmentLLC, Raleigh, N.C.; Brian Metcalf, RW Moore;Mike Johnson, Triton Sitework DevelopmentLLC; Craig McBeth, John Deere; host DanMoore; and Scott Knox, John Deere.
Chuck Harris (L), Benchmark Tool & Supply’sevent host, thanks Steve Harris, The Fred SmithCompanies, for his business.
James Cummings, Waste Industries, Apex, N.C., liked the effi-ciency of the John Deere 700K LGP dozer equipped with aTopcon device.
Josh Kearns (L) and MikeGaillard, both of Benchmark Tool& Supply, talk about theincreased operator efficiencywhen a Topcon LS-B100 laserreceiver is placed on an excava-tor.
see SKEET page 93
(L-R): Terry and Kathy Parker, TAPConstruction, Four Oaks, N.C., are welcomed tothe annual clay shooting event by Dan Moore.
SKEET from page 12
SECT IONPaving
Dynapac Unveils 5th Generation of Single Drum RollersDynapac USA has introduced four mod-
els of its CA-series single drum vibratoryrollers. The CA5000, CA5500, CA6000 andCA6500 have been equipped with a numberof enhancements over previous models,including optimized drum amplitude, auto-matic bouncing control and an overalldesign that makes it easier to service theequipment, according to the manufacturer.
Compaction is delivered by the new mod-els utilizing drum amplitude of .083in. (.2 cm.) This increasedforce allows rock fill tobe compacted in layersalmost 9 ft. (2.7 m) thickwith rock sizes up to 3 ft.(.9 m) in diameter. Italso requiresfewer passes toreach com-paction specifi-cations.
Automatic bouncing control measuresfeedback from the drum and eliminatesdrum bouncing or over compacting. Thisfeature improves compaction performancewhile extending the useful life of the equip-ment by eliminating drum double-jump,which could lead to premature failure ofmachine components, according to the man-ufacturer.
The CA6000D
model also features a governor to avoidcompacting at too high a speed.
A full package of design featuresenhances the serviceability of all models.The cross-mounted engine not only offerseasy access for service and maintenance, italso provides enhanced weight distributionand reduces overall machine length. Thehydraulic pumps, arranged in line with theengine, are easily accessed for servicing.
Another key feature is the “ECOmode” fuel conservation system thatminimizes fuel consumption aswell as carbon dioxide emissionsby ensuring that the roller does notconsume more power than neededat any given time. The models also
give attention to enhanced safety fea-tures with electronic drive control,which provides a “quick brake” func-tion and a tilt indicator. Dynapac’santi-spin traction system ensuresconsistent on-the-go traction andgradeability.
The combustion air intake isplaced on the engine hood with the
outlet running down the sides, thereby keep-ing the inlet air as clean as possible. Whencombined with the ejector exhaust outlet,this placement also serves to minimize noiselevels.
The CA rollers have static linear loads of280 pounds per linear inch (pli) on theCA5000, 310 pli on the CA5500, 335 pli onthe CA6000 and 365 pli on the CA6500. Allfour models are equipped with interim TierIV engines from Deutz, and can use a mix ofbiodiesel and regular diesel fuel.
Optional features on the new rollersinclude:
• Service interval alert on instrumentpanel indicates when a particular service isrequired
• Sustainability package: an rpm manage-ment system, biodegradable fill-for-lifehydraulic fluid, 50 hours service kit, electri-cal engine block heater and working lightswith LED lamps (CA6000D only.)
• Air-conditioned cabs with spin-aroundseat and steering module, offering move-ment of up to 180 degrees without stressingneck or body. Spin-around seats also areavailable as a standalone option, without thecab.
• Productivity software, includingDynapac CompBase, providing task
planning, execution andanalysis, and CostCtrl
web-based soft-ware for life-cycle cost con-trol andi n c r e a s e dmachine avail-ability.The CA rollers
are available instandard modelswith a choice of
specifications andavailable options allowing
customers to “build”their own machines, orchoose from a numberof pre-defined pack-ages.
For more information, visitwww.dynapac.us.
Pages 63-75
Dynapac’s new CA6000 single-drum vibratory roller.
Page 64 • October 3, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Dynapac USA3700 East 68th Avenue
Commerce City, CO 80022
Phone: 800-732-6762 Fax: 303-288-8828 www.dynapac.us
Authorized Dynapac Dealers
Dynapac’s CC 624F
and compaction performance...
Dynapac’s CC624HF double-drum, high frequency vibratory asphalt rollers offer complete compaction control including mat temperature, speed, blows per foot, and other exceptional features.
Designed to meet the needs of road contractors –
Dynapac – Providing Dynamic Compaction Solutions for over 70 years.
Doggett Construction & Forestry Equipmentwww.doggettgroup.com
St. Rose, LA 504.466.5577Covington, LA985.893.3005
Baton Rouge, LA225.291.3750Sulphur, LA
337.626.8503Alexandria, LA318.442.0455Monroe, LA
318.343.8787Shreveport, LA318.631.3090
Flint Equipment
Albany, GA229.888.1212
Perry, FL850.584.9200
Tallahassee, FL850.575.5600
Aynor, SC843.358.5688
Simpsonville, SC864.963.5835
W. Columbia, SC803.794.9340Adairsville, GA 770.773.9857Atlanta, GA
404.691.9445 Grovetown, GA706.855.5440Braselton, GA770.965.1889Columbus, GA706.687.3344Macon, GA
478.788.1586
James River Equipment
Charlotte, NC704.597.0211
Greensboro, NC336.668.2762Asheville, NC828.667.0176
Rish Equipment Co.
Chesapeake, VA757.485.2100Chester, VA
804.748.6411Coeburn, VA276.395.6901Bealeton, VA540.439.0668
Salem, VA540.380.2090Staunton, VA540.887.8291
Tractor & Equip. Co.
Tuscaloosa, AL205.752.0621
Panama City, FL850.763.4654Pensacola, FL850.505.0550Alabaster, AL205.621.2489Anniston, AL256.831.2440
Birmingham, AL205.591.2131Decatur, AL
256.355.0305Dothan, AL
334.678.1832 Grove Hill, AL334.275.4158
Mobile, AL251.457.8991
Montgomery, AL334.288.6580
Shoals Area, AL256.383.5666
Trekker Tractor, LLCwww.www.trekkertractor.com
West Palm Beach, FL561.296.9710
Miami, FL877.971.7070
Tampa, FL813.341.4646
Bonita Springs, FL239.949.0100
Atlas Copco Construction & Mining
www.atlascopco.usPompano Beach, FL
855.DYNAPACwww.atlascopco.us/miami
LaVergne, TN615.641.3000
www.atlascopco.us/nashville
Knoxville, TN865.673.0344
www.atlascopco.us/knoxville
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 3, 2012 • Page 65
The Worldwide Leader in Concrete Paving Technology
CONCRETE STREETS AND HIGHWAYS � AIRPORT RUNWAYS � CURB AND GUTTER � SIDEWALKSRECREATIONAL TRAILS � SAFETY BARRIER � BRIDGE PARAPET � BRIDGE DECKS � IRRIGATION CANALS
GOMACO CORPORATION IN IDA GROVE, IOWA, USA � THE WORLDWIDE LEADER IN CONCRETE PAVING TECHNOLOGY � 800-831-2320
info@gomaco.com � www.gomaco.com
FLAGLER CONSTRUCTIONEQUIPMENT, LLC
www.flaglerce.com
5210 Reese RoadDavie, FL, 33314
954-581-4744954-583-0318 (Fax)
5151 Dr. Martin LutherKing, Jr. Blvd.
Ft. Myers, FL 33905239-481-8554
239-481-3302 (Fax)
Birmingham, AL2238 Pinson Valley Parkway
Birmingham, AL 35217205-841-6666
205-849-0853 (Fax)
Mobile, AL23 Schillinger Road North
Mobile, AL 36608251-633-4020
251-633-9157 (Fax)
Montgomery, AL3120 Old Hayneville RoadMontgomery, AL 36108
334-262-6642334-834-2272 (Fax)
Huntsville, AL15101 Alabama Highway 20
Madison, AL 35756256-350-0006
256-355-5250 (Fax)
Oxford, AL1501 Highway 78 East
Oxford, AL 36203256-832-5053
256-831-4295 (Fax)
Pensacola, FL7950 Pittman AvenuePensacola, FL 32534
850-479-3004850-474-1602 (Fax)
5732 Frontage RoadForest Park, Georgia 30297
404-366-0693404-366-9688 (Fax)
160 Robinson Road NWCalhoun, Georgia 30701
706-879-6200
2314 Highway 53Hoschton, Georgia 30548
706-654-9850706-654-9856 (Fax)
1502 Box RoadColumbus, Georgia 31907
706-562-1801706-562-9897 (Fax)
2727 Gray HighwayMacon, Georgia 31211
478-745-6891478-745-7291 (Fax)
3809 Mike Padgett HighwayAugusta, Georgia 30906
706-798-7777706-798-3237 (Fax)
1815 West Oakridge DriveAlbany, Georgia 31707
229-435-0982229-435-5259 (Fax)
1200 Highway 80 EastPooler, Georgia 31322
912-330-7500912-330-7490 (Fax)
1355 Big Shanty RoadKennesaw, Georgia 30144
678-354-5533678-354-5577 (Fax)
STOWERS MACHINERY
CORPORATIONwww.stowerscat.com
Knoxville Headquarters865-546-1414Knoxville West865-218-8800Chattanooga
423-698-6943Kingsport
423-323-0400Crossville
931-484-4040
COWIN EQUIPMENT CO. TRACTOR & EQUIPMENT COMPANYwww.tractor-equipment.com
Page 66 • October 3, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Serving the Asphalt Industry for 25 YearsServing the Asphalt Industry for 25 Years
1989 Blaw Knox PF200Paver, Omni III screed10-18 ft, Cumminsdiesel engine
2003 SweepsterHBC74MNHbroom attachment,Big Dawg - bucketbroom sweeper attachment, 6 1/2 ftwide
2009 MarathonKERA145HD CrackSealer, rubberized melting kettle for cracksealing and waterproof-ing, 145 gallon, Dieselengine, diesel heat, heated hose and handwand, 80cfm air compressor
2002 Ingersoll RandDD24 Roller, doubledrum 47” vibratoryroller, Kubota dieselengine, OROPS, watersystem, scrapers
2012 Cam Superline6CAM16FTT Trailer,6 ton full tilt trailer, 18 ft long, reverse anglebeavertail, 8 D ring tiedowns, 102” wide, 81”useable width, color-black, GVWR 13,800 lbs,empty weight 2880 lbs,payload 10,920 lbs
2003 Hypac C530AHRoller, 9 wheel rubber tire roller,Cummins 3.3L dieselengine, co-co mats,water system, canopy
1998 Etnyre 9-18 ftextendable chipspreader, 4 wheeldrive, computerized,hydrostatic drive,Cummins dsl eng
2005 CaterpillarAS2301 Screed,Caterpillar Screed lowhour take off, 10 - 181/2 feet, diesel heat,power crown & slope
1975 Blaw Knox RW195 Road Widener,4 wheel drive, 14ftwidening, 2-3ft hyd.Ext.
866-430-75393517 Wayne White Rd., Climax, NC 27233
jfwequip@aol.com
www.jfwequipment.com
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 3, 2012 • Page 67
FLORIDA
Pensacola, FL850-505-0550
Panama City, FL850-763-4654
ALABAMA
5336 Messer Airport Hwy.Birmingham, AL 35212
205-591-2131
Fax: 205-591-8321
Grove Hill, AL251-275-4158
Tuscumbia, AL256-383-5666
Dothan, AL334-678-1832
Mobile, AL 251-457-8991
Decatur, AL256-355-0305
Alabaster, AL205-621-2489
Tuscaloosa, A205-752-0621
Montgomery, AL334-288-6580
Oxford, AL256-831-2440
www.tractor-equipment.com
www.reynoldswarren.com1945 Forest ParkwayLake City, GA 30260
800-875-5659 • 404-361-1593
Fax: 404-361-1885
RICHMOND MACHINERY &EQUIPMENT CO., INC.
1701 Roseneath Rd.Richmond, VA 23230
1-800-662-6485
Page 68 • October 3, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
POWER EQUIPMENTCOMPANY
3300 Alcoa HighwayKnoxville, TN 37920
(865) 577-5563
1487 Rock Springs RoadKingsport, TN 37664
(423) 349-6111
Highway 58 @153Chattanooga, TN 37406
(423) 894-1870
1290 Bridgestone PkwyLaVergne, TN 37086
(615) 213-0900
3050 Ferrell Park CoveMemphis, TN 38116-3502
(901) 346-9800
1545 Highway 45Saltillo, MS 38866
(662) 869-0283
RISH EQUIPMENTCOMPANYwww.rish.com
917 Cavalier Blvd.Chesapeake, VA 23323
(757) 485-2100(757) 485-3616
1410 West Hundred Rd.Chester, VA 23836
(804) 748-6411
133 Wise Mountain Rd.NW
Coeburn, VA 24230(276) 395-6901
Fax: (276) 395-3438
10214 Fayetteville Rd.Bealton, VA 22712
(540) 439-0668Fax: (540) 439-0719
5731 Glenmary DriveSalem, VA 24153(540) 380-4858
66 International laneSuite 102
Staunton, VA 24401(540) 887-8291
Fax: (540) 887-8295
REYNOLDS-WARRENCOMPANY INC1945 Forest ParkwayLake City, GA 30260
(800) 875-5659(404) 361-1593
TRACTOR & EQUIPMENT COMPANY
5336 Messer-Airport HwyBirmingham, AL(205) 591-2131
3820 Greensboro Ave.Tuscaloosa, AL(205) 752-0621
2100 East I-65 Service Rd.North
Mobile, AL(251) 457-8991
800 Church St. N.E.Decatur, AL
(256) 355-03053285 Selma HighwayMontgomery, AL (334) 288-6580
243 South Jackson St.Grove Hill, AL
(251) 275-4158961 Hwy 20 & Elledge Lane
Tuscumbia, AL(256) 383-5666
4307 Reeves StreetHighway 431 North
Dothan, AL(334) 678-1832
309 Hamric Drive WestOxford, AL
(256) 831-2440150 Piper LaneAlabaster, AL
(205) 621-24893305 Highway 77Panama City, FL(850) 763-4654
9036 Pine Forest Rd.Pensacola, FL
(850) 505-0550
Volvo PF6160, PF6170 Wheel-MountedPavers Designed for Productivity
The Volvo PF6160 and PF6170 wheel-mounted paversare part of the PF6000-Series highway-class asphalt paverline that utilizes global technology to provide solutions thatincrease paving performance and provides maximum uptimefor the machine, according to the manaufacturer. Both the PF6160 and PF6170 are powered by a 205-hp
(153 kW) Tier III-certified Cummins engine. A level-loadsuspension design uses the two drive wheels and the centerof the bogie hydraulic system. This provides consistent andeven ground contact for stability. Both the PF6160 and thePF6170 come standard with the two-wheel front-wheelassist; however, the PF6170 can be configured with anoptional four-wheel front-wheel assist for all-wheel-drivecapability. The torque is adjusted based on the hopper load,optimizing the machine’s traction.
Material ManagementA number of features on these pavers provide contractors
with more options in material flow. The auger system is inde-pendent of the conveyor system with each of the two augerand conveyor drives using sonic sensors for more precisehandling of material. The conveyor system has chains thatare automatically tensioned for proper performance and lessdowntime. The conveyor chain cover cleans itself, providingeasier maintenance. Reversible augers and conveyors areoptional equipment.
A hopper capacity of 14.38 tons (13.04 t) gives each pavera practical production rate of 820 tons (744 t) per hour.Standard on all PF6000-Series pavers are hopper locks thatkeep hopper wings secure during transport.
Operator ControlsThe PF6160 and PF6170 feature dual control stations,
which can pivot at two points for comfort, and each seat maybe extended beyond the edge of the machine for improvedvisibility. An open deck space improves mobility for theoperator and increases visibility, and secure handrails pro-vide added safety. The operator panel keeps all controls,gauges and warning lights at the fingertips of the operator,with the ability for the panel to tilt or swivel to fit the com-fort of the operator.
Your Choice of ScreedThe Volvo PF6160 and PF6170 can fit the Omni 318,
Omni 1000 or Ultimat 200 screeds, allowing the flexibilityto build a paver to fit the needs of the application. Bothpavers have a screed width of 10 ft. (3 m) and a maximumpaving width of 26 ft. (8 m). PF6000-Series pavers have a30-kilowatt generator providing plenty of power to thescreeds. For more information, call 828/650-2000 or visit
www.volvo.com.
The PF6160 and PF6170 feature dual control stations, which can pivot at two points for comfort, and each seatmay be extended beyond the edge of the machine for improved visibility.
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 3, 2012 • Page 69
Page 70 • October 3, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
POWER AND PRODUCTIVITY.Get More Done With Versatile Terex® Compact Equipment
You need a machine that offers the right combination of power and productivity. And that’s what you get with Terex® equipment.
We offer over 60 unique models within our construction product line. Our skid steer loaders, excavators, wheel Loaders, backhoes and compact track loaders provide the traction, maneuverability, reach and clearance you need to take control of demanding repetitive workloads.
© 2012 Terex Corporation. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries.
LashleyTractor Sales
6953 Covington HighwayLithonia, GA 30058Fax: 770-808-0735
www.lashleytractorsales.net
770-808-5500866-458-1207
GIVE. ADVOCATE. VOLUNTEER. LIVE UNITED™
Want to make a difference? Find out how at LIVEUNITED.ORG.
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 3, 2012 • Page 71
www.sakaiamerica.com1-800-323-0535
WHILE SOME PEOPLE ARE HAVING A PROBLEM GRASPING THE CONCEPT,THEY’RE SURE NOT HAVING ANY DIFFICULTY GRABBING THE RESULTS.
It’s a rubber tire roller that vibrates with enough centrifugal force to equal the output of a55,000 pound pneumatic. The GW750 handles the toughest HMA mixes with ease, gettingbalanced high densities from the top through the bottom of the mat. Great on SMA, too! Andit provides a sound interlock between new overlays and profiled surfaces. It’s bonus time!
Check one out at your Sakai dealer today.
JAMES RIVEREQUIPMENT
Ashland, VA 23005804/798-6001
Burkeville, VA 23922434/767-5578
Chester, VA 23831804/748-9324
Fishersville, VA 22939540/337-3057
Fredericksburg, VA22408
540/373-2778Salem, VA 24153
540/380-2011Manassas Park VA 20111
703/631-8500South Hill, VA434/447-1325
Danville VA 24540434/822-6110
Richmond VA 23220840/358-6776
Winchester, VA 22602540/667-9777
Asheville, NC 28806828/667-0176
Charlotte, NC 28269704/597-0211800/532-6797
Greensboro, NC 27409336/668-2762 800/632-0376
Wilkesboro, NC 28697336/973-8201800/422-4193
Mt. Gilead, NC 27306910/439-5653800/692-9175
Asheboro, NC 27203 336/625-2212
Salisbury, NC 28144 704/636-2571
Matthews NC, 28104704/821-7399
Rock Hill SC 29730803/325-1555866/277-8119
Reynolds-Warren Equipment Companywww.reynoldswarren.com1945 Forest ParkwayLake City, GA 30260
800/875-5659 • 404/361-1593
T
Page 72 • October 3, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Birmingham, AL205-841-6666Mobile, AL
251-633-4020Montgomery, AL
334-262-6642
Huntsville / Decatur, AL
256-350-0006Oxford, AL
800-917-7931Pensacola, FL850-479-3004
RICHMOND MACHINERY & EQUIPMENTRichmond, VA804-359-4048800-662-6485
Orlando, FL (Corporate Office)407-659-8700Orlando, FL
407-850-9614Jacksonville, FL904-737-6000
Ft. Myers, FL239-481-8554Davie, FL
954-581-4744Tampa, FL
813-630-0077
ASC CONSTRUCTIONEQUIPMENT
NORTH CAROLINAAsheville, NC828-687-0620Charlotte, NC704-596-8283Raleigh, NC
919-661-8710Greenville, NC252-754-5280
ASC CONSTRUCTIONEQUIPMENT
SOUTH CAROLINAColumbia, SC803-791-0740Piedmont, SC864-704-1060
North Charleston, SC843-414-1120
ASC CONSTRUCTIONEQUIPMENT GEORGIABuford, GA
678-318-9500Savannah, GA912-964-8079Forest Park, GA770-319-0074
ASC CONSTRUCTIONEQUIPMENT TENNESSEEChattanooga, TN
423-308-7940Knoxville, TN865-525-1845
FLAGLER CONSTRUCTION EQUIPMENT, LLC.
COWIN EQUIPMENT CO. INC.
INCREASE YOUR BONUS POTENTIAL.LET’S WORK.You need a partner you can rely on. Volvo Construction Equipment builds high-qualityroad building equipment backed by knowledgeable industry experts. We understand thatreliability and performance help you meet strict specifications, keeping you profitable and helpingearn your bonus. Our graders, milling machines, pavers and compactors are engineered to dojust that – keep you productive and give you the best shot at increasing your earning potential.
Learn how to increase your productivity by contacting a Volvo dealer near you.Visit volvoce.com/na today.
Volvo Construction Equipment
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 3, 2012 • Page 73
SARASOTA PARTS
Sarasota, FL 34243941-752-1300
TAMPA PARTS
Riverview, FL 33569813-621-4902
MIAMI
Miami, FL 33166305-592-5740
WEST PALM BEACH
West Palm Beach, FL 33404561-848-6618
ORLANDO
Orlando, FL 32804407-299-1212
FORT MYERS
Ft. Myers, FL 33916239-334-3627
POMPANO BEACH PARTS
Pompano Beach, FL 33064954-977-9541
MELBOURNE PARTS
West Melbourne, FL 32904321-729-8944
NEW TAMPA
Lutz, FL 33559813-995-0841
NORTRAX
Page 74 • October 3, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
www.wirtgenamerica.comROAD AND MINERAL TECHNOLOGIES
THE NEW DYNAMIC EFFICIENCY W 210i WITH MORE THAN 60 NEW INNOVATIVE FEATURES
More power with less fuel technology:PTS – Parallel to Surface
WIDRIVE – New control solutions
ISC – Intelligent speed control
LEVEL PRO – Designed for the crew
3DS – Flexible application drum speed
VCS – Environmentally friendly
W 210iEngine: 716 HPMilling widths: 6’ 7”; optional: combo and 7’ 3”Milling depth: 13”Operating weight, CE: 63,670 lbs
Knoxville, TN • 865/577-5563LaVergne, TN • 615/213-0900
Chattanooga, TN • 423/894-1870Kingsport, TN • 423/349-6111Memphis, TN • 901/346-9800Saltillo, MS • 662/869-0283
FloridaFt. Myers • 239/337-1313Jacksonville • 904/786-6710
Ocala • 352/629-7585Orlando • 407/849-6560
Pembroke Pines • 954/433-2800Plant City • 813/754-2727
West Palm Beach • 561/863-0570
North CarolinaAsheville • 828/681-5172Charlotte • 704/376-7554Greenville • 252/695-6200High Point • 336/665-0110Raleigh • 919/851-2030
Wilmington • 910/254-2031
South CarolinaColumbia • 803/794-6150Greer • 864/877-8962
North Charleston • 843/552-0095
Operating Max DigM
find us on
Ashland, VA • 804/798-6001Fishersville, VA • 540/337-3057Richlands, VA • 276/596-9440Salem, VA • 540/380-2011
Winchester, VA • 540/667-9777www.JamesRiverEquipment.com
www.facebook.com/linderindustrialmachinery
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 3, 2012 • Page 75
Calder Brothers Corporation250 E. Warehouse Ct. | Taylors, SC 29687
phone: (864) 244-4800 | fax: (864) 244-5007 | www.4aMauldin.com
Discover More Ways Mauldin Can Help You Become a Master of the Mat.
Mauldin’s 1750-C Super
Paver is ready for fast andhard action. Unmatched performance and durabilityset this heavyweight apart from all others.
Check the details atwww.4aMauldin.com.
M413XT
MG622
PrecisionSpray
STOWERS MACHINERY CORP.www.stowerscat.com
Knoxville Headquarters (865) 546-1414Knoxville West (865) 218-8800Chattanooga
(423) 698-6943Kingsport
(423) 323-0400Crossville
(931) 484-4040
RICHMOND EQUIPMENT &
MACHINERY CO., INC.www.richmondmachinery.com
1701 Roseneath RdRichmond, VA 23230
(804) 359-4048(800) 662-6485
Attalla-Gadsden, AL (866) 811-7609Birmingham, AL(800) 547-0760Crestview, FL(850) 682-6510
Decatur-Huntsville, AL (800) 435-0922Dothan, AL
(334) 671-1040Huntsville, AL(256) 532-1776Marianna, FL(850) 526-2241Mobile, AL
(800) 243-0665Montgomery, AL (800) 521-9511
Opelika-Auburn, AL (334) 749-3359
Oxford-Anniston, AL (800) 547-8897Panama City, FL (850) 785-4007Pensacola, FL(850) 471-6700
Shelby County, AL (205) 664-4833Thomasville, AL(334) 636-0420Tuscaloosa, AL (205) 247-2800Tuscumbia, AL (256) 381-2771
Albany(800) 768-2892
Augusta(800) 446-5131
Austell(800) 282-1562Bloomingdale(800) 482-1144
Brunswick(800) 299-5010
Calhoun(800) 752-9804
Columbus(800) 633-5240
Dacula(800) 545-2945
Kennesaw(866) 289-2228
Macon(800) 633-5180
Savannah(800) 755-8382Statesboro
(888) 764-6506Valdosta
(800) 755-6841Washington
(888) 678-3211Waycross
(888) 948-2443
KELLY TRACTOR CO.8255 NW 58th St.
Miami, FL(305) 592-5360Clewiston, FL(863) 983-8177Ft.Myers, FL
(239) 693-6563West Palm Beach, FL
(561) 683-2015Davie, FL
(954) 581-8181
LOUISIANA CATinfo@Louisianacat.comwww.Louisianacat.com
P.O. Box 356Reserve, LA 70084(985) 536-1121(866) 843-7440Alexandria, LA(318) 443-2577Bossier City, LA(318) 746-2341Hammond, LA(985) 340-2820Lake Charles, LA(337) 439-3601Lafayette, LA(337) 837-2476Monroe, LA
(318) 323-1345Prairieville, LA(225) 673-3480Mansfield, LA(318) 872-9700
THOMPSON TRACTORwww.thompsontractor.com
YANCEY BROS. CO.www.yanceybros.com
Page 76 • October 3, 2012 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide
Doosan DX140W Wheel ExcavatorFeatures More Power, Performance
The Doosan DX140W wheel excavator combinesincreased power and performance with interim Tier 4 (iTIV)updates. New technologies make this excavator ideal forhighway and street development, commercial construction,bridge and railway development and dealer rental, accordingto the manufacturer.The DX140W is powered by a 135-hp (100.6 kW), 6-
cylinder DL06KB water-cooled diesel engine that has beenoptimized for use with cooled exhaust gas recirculation(CEGR) system, diesel oxidation catalyst (DOC) and dieselparticulate filter (DPF). The engines in this configuration areoptimized to reduce nitrogen oxide (NOX) and after-treat-ment is needed to reduce particulate matter, to comply withiT4 emission regulations. The turbocharged 359-cu.-in.engine features a high pressure common rail design withdirect fuel injection, electronic control and four valves percylinder.
PerformanceThe electronic power optimizing system (EPOS) provides
optimum power and fuel efficiency via four work modes,auto-idle and machine diagnostics. Operators can work moreeffectively with multiple operating modes, easy-to-read dis-play monitors and precise control levers. The new powerplus mode provides improved performance and faster work-group speeds for heavy duty work. Four work modes — dig-ging, breaker, shear and the new lifting mode — allow oper-ators to get maximum efficiency and fuel economy in spe-cific applications.A new electronic fan clutch reduces fuel consumption and
noise levels, while providing cooling system improvements.Outriggers can be controlled individually to level themachine on uneven surfaces. The front axle oscillates andprovides excellent steering angles for maneuverability, butcan be locked for better digger and lifting performance.
OptionsThe DX140W features a new intelligent floating boom
option that allows the boom of the excavator to “float” up ordown, allowing the operator to focus more on the task whiledecreasing the machine workload and increasing efficiency.Intelligent floating boom mode allows the boom to movefreely up and down without hydraulic flow; and in breakermode the boom is allowed to move freely down, only with-out hydraulic flow. A temporary reset button allows the abil-ity to momentarily disengage the float, allowing hydraulicflow to activate the boom. Also offered is an air compressor,which is ideal for operators in remote and dusty locations toblow out the cab or filters.
ComfortDoosan continues to focus on operator comfort with fur-
ther enhancements to the roll-over protective structure(ROPS) cabin. Both a seat height lever and tilting functionfor the seat cushion were added to the seat to allow the oper-ator to find an optimum seating position. The cabin mount-ing mechanism has been improved with a thickened damp-ening plate, and an internal coil spring has been added toreduce cabin vibration 20 percent, allowing operators towork longer days with less fatigue.The door window position slider now locks in various
positions, preventing it from moving from its intended loca-tion. The door space of the cab has increased by 1.8 in.,allowing the operator to get in and out more easily. The cabinsize has increased 6.1 percent, providing more headroom.The joystick angle has been reduced from 25 degrees to 19degrees to provide a more ergonomic profile and decreaseinterference with operators’ legs.The Doosan DX140W — like every new Doosan
machine — is covered by a 48 hour parts guarantee. The pro-gram guarantees that if a “machine-debilitating” part is need-ed, Doosan will deliver it directly to the end user within twobusiness days or Doosan will pay for a replacement machinerental. The 48 hour parts guarantee is subject to carrier deliv-ery restrictions and/or governmental agency delays.For more information, visit www.doosanequipment.com.
The DX140W is powered by a 135-hp (100.6 kW), 6-cylinder DL06KB water-cooled diesel engine that has beenoptimized for use with cooled exhaust gas recirculation (CEGR) system, diesel oxidation catalyst (DOC) anddiesel particulate filter (DPF).
Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • October 3, 2012 • Page 77
Tier IVi Compliant…
Doosan Portable Power Offers Four New Mobile GeneratorsDoosan Portable Power now offers four
new models in its mobile generator portfoliothat have been designed to meet federalEnvironmental Protection Agency (EPA)Tier IV Interim (Tier IVi) emission stan-dards.
The new models include: • The G150, with a prime power rating at
152 kVA / 122 kW• The G190, with a prime power rating at
194 kVA / 155 kW• The G240, with a prime power rating at
238 kVA / 190 kW• The G325, introduced earlier this year,
with a prime power rating at 326 kVA / 261kW
These new Doosan generators have beensubstantially redesigned from their predeces-sors to incorporate numerous innovationsbased on customer input to improve theoperator experience.
Controls Are Simplified for Easy Operation
The new operator-preferred analog con-trol panel has been enhanced featuring large,brightly lit meters for at-a-glance monitor-ing. The onboard engine diagnostic display
panel from Doosan now includes the con-trols and indicators required to operate andmaintain the aftertreatment regeneration sys-tem that is a key component of the new TierIVi technology to meet engine emissions. Arun/idle switch on the control unit ensuresreduced engine wear during startup inextreme cold temperatures. Dual frequencycapability is now standard on the Tier IVportfolio to expand the versatility of themachines to power 50Hz applications withthe simple flip of a switch.
All four generators feature a voltageselector switch for quick and easy configura-tion for most common voltages. The signa-ture protection feature on Doosan PortablePower generators prevents operators fromswitching voltage during operation — acommon cause of downtime and expensivecomponent failure, according to the manu-facturer.
Connection PanelsConnection panels are now more accessi-
ble for improved safety and conveniencewith more power wiring connections avail-able, an optional camlock panel to furtherexpand connection versatility, an array of
twist-lock and GFCI receptacles and a ter-minal board that accepts bare wire or luggedcable.
Panels are “tool release” to protect againstcontact with live electrical terminals andconnection areas are illuminated to improvesafety during nighttime operation.
Sound LevelsSound levels are reduced by as much as 5
dBA to ensure quiet operation. Because TierIVi technology increased the cooling needsof the generator, Doosan Portable Powertook the Tier changes as an opportunity todevelop a completely new and uniqueapproach to package cooling from theground up.
The rugged enclosure features a dual-compartment design, incorporating the pow-ertrain and cooling system into separatecompartments. The package design com-bined with the use of electric cooling fansand a radial-fan in the new Tier IVi genera-tors yield lower sound levels without sacri-ficing performance or reliability — even atextreme temperatures — and all with mini-mal increase to the generator footprint,according to the manufacturer.
ServiceablilityServiceability continues along with Tier
IVi technology. The new generators fromDoosan Portable Power have 500-hour serv-ice intervals. Longer runtime — exceeding24-hours at any load factor — is ensuredwith these new units due to increasedonboard fuel capacity.
ReliabilityThe heavy-gauge galvannealed steel
enclosure is finished with a 13-stage pow-der-coat process to provide the ultimate incorrosion protection, while ensuring super-quiet operation.
The environmental containment systemcontains and prevents spillage of fuel and oil,while the new enclosure design yields near-zero water ingression into the containmentbasin, even in the heaviest of rainstorms.
For safe and trouble-free towing, themobile generator units are built on heavy-duty skid bases and feature the toughest run-ning gear components for on- or off-roadtransportation.
For more information, visit doosan-portablepower.com.
Page 78 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
And Your Hitachi Dealers
9550 Statesville RoadCharlotte, NC 28269
704/597-0211Fax 704/596-6198
101 Bruce Rd.Asheville, NC 28806
828/667-0176Fax 828/667-4865
411 South Regional RoadGreensboro, NC 27409
336/668-2762Fax 336/668-3714288 Westgate Drive
Wilkesboro, NC 28697336/973-8201
Fax 336/973-8496305 N. Main St.
Mt. Gilead, NC 27306910/439-5653
Fax 910/439-4568
380 Anderson Road HighwayRock Hill, SC 29730
803/325-1555Fax 803/325-1506
2510 Highway 70 SWHickory, NC 28602
828/322-4300Fax 828/322-4244
2421 US Highway 64 EastAsheboro, NC 27203
336/625-2212Fax 336/625-0738
2725 Old Monroe RoadMatthews, NC 28104
704/821-7399Fax 704/821-4915805 Klumac Road
Salisbury, NC 28144704/636-2671
Fax 704/636-4827
11047 Leadbetter Rd.Ashland, VA 23005
804/798-6001Fax 804/752-7111
1711 E. Hundred Rd.Chester, VA 23836804/748-9324
Fax 804/530-1930Route 360 & 460
Burkeville, VA 23922434/767-5578
Fax 434/767-37743902 W. Main St.Salem, VA 24153540/380-2011
Fax 540/380-554798 Expo Road
Fishersville, VA 22939540/337-3057
Fax 540/337-1495
287 Victory RoadWinchester, VA 22602
540/667-9777Fax 540/667-94419107 Owens Drive
Manassas Park, VA 20111703/631-8500
Fax 703/631-47152055 South Boston Road
Danville, VA 24540434/822-6110
Fax 434/822-605510879 Houser Dr.
Fredericksburg, VA 22408540/898-8933
Fax 540/373-8842
Carolinas’ Division
Virginia Division
504 South Military Hwy.Virginia Beach, VA 23464
757/424-1900
333 Freedom Blvd.Yorktown, VA 23692
757/898-1900
Coastal Equipment Corpwww.coastalequipment.net
al tweaks that April plan, making theroute veer east shortly after enteringthe state to avoid more of the sensitiveareas in Keya Paha County, east againaround the town of Clarks and westaround the town of Western to avoiddrinking water well fields. “TransCanada shares the goal of
protecting key water and naturalresources with Nebraskans,”TransCanada CEO Russ Girling said.The proposal also upgrades plannedsafety measures, adding more remotecontrol shut-off valves and inspections,the company said. Nebraska regulators said they would
review the new proposal and hold apublic hearing on it before submittinga recommendation to the governor,possibly by the end of the year. Thegovernor will decide whether toapprove the new route for the pipeline. “An initial scan of the report indi-
cates that it responds to some of thecomments raised by the NDEQ and thepublic, but a full evaluation will now
begin,” said Mike Linder, director ofthe state agency. Environmental groups have long
opposed the pipeline project becauseof concerns that it could contaminateunderground and surface water sup-plies, increase air pollution aroundrefineries and harm wildlife. Bold Nebraska’s Jane Kleeb said the
latest new route doesn’t go far enoughto address her group’s concerns aboutpotential erosion of the Sandhills andgroundwater contamination, so shebelieves state and federal officialsshould block the pipeline. “The route still crosses the aquifer
and it still crosses sandy soil, so all ofthe same concerns remain,” Kleebsaid. TransCanada spokesman Grady
Semmens said only 36 mi. (58 km) ofthe 275 mi. (442 km) of pipeline inNebraska would cross sandy soils, andthe new route entirely avoids the areaNebraska defined as the Sandhills. Joe Mendelson of the National
Wildlife Federation said the Keystone
XL pipeline puts too much naturalhabitat at risk. “The best approach is to ditch
Keystone XL entirely and embraceclean energy solutions that don’t spillor explode,” Mendelson said. The pipeline is designed to carry oil
from Canada across Montana, SouthDakota, Nebraska, Kansas, Oklahomaand Texas. TransCanada also has pro-posed connecting it to the Bakken oilfield in Montana and North Dakota. President Barack Obama rejected
TransCanada’s original application fora federal permit to build the pipeline inJanuary after congressionalRepublicans imposed a deadline forapproval that didn’t allow enough timeto address questions about the routethrough Nebraska. Since then, TransCanada has split
the project into two pieces. The com-pany began construction in July on thesouthern section of the pipelinebetween Oklahoma and the GulfCoast.
TransCanada Tweaks First Plan, Aims toProtect Vital Water, Natural Resources
PIPELINE from page 1
The Association of Equipment Manufacturers (AEM)recently led a delegation of small and medium-sized mem-ber company representatives from the heavy off-road equip-ment industry on an oil sands trade mission. The trade mis-sion also was sponsored by the American Rental Association(ARA). The group arrived in Calgary for a briefing on the oil
sands industry, and the regulatory and political environmentin Alberta. Speakers for the briefing included formerSyncrude Vice President Don Thompson, HBW ResourcesExecutive Vice President in Canada Randy Kerr, andTransCanada Pipelines Supply Chain Management DirectorGrant Martin. The following day the representatives headed to Ft.
McMurray to tour Syncrude Canada and receive a briefingby the Wood Buffalo Regional Municipality on the eco-nomic and political status of the oil sands, and future pro-jections of growth and investment in the area. “The Canada oil sands are a bright spot for safer and
securer oil in North America, and show tremendous promiseof long-term investment and growth for the U.S. heavy off-road equipment industry,” AEM Vice President of GlobalPublic Policy Nick Yaksich said. “As the industry continues
to grow, equipment manufacturers will play an importantrole in providing the much needed resources for these sitesto successfully operate. Swift approval of the Keystone XLpipeline will boost the American economy by creating moremanufacturing jobs right here at home.” “We are incredibly impressed by the advances taking
place on the oil sands as this region rapidly becomes a lead-ing global source for secure energy,” ARA Vice President ofGovernment Affairs, John McClelland said. “Equipmentrental companies operating in the area are investing heavilyin their rental fleets to meet the demand for equipment thatcontinues to expand as oil sands projects expand. StateDepartment approval of the Keystone Pipeline could expandproduction at the oil sands, and increase demand for rentalequipment at the oil sands and all down the pipelinethroughout North America. These sands are proof of positiveadvances in North American energy security and we lookforward to continuing to support this important industry.”The State Department is currently reviewing the proposed
permit for the Keystone XL oil pipeline. Prompt approvalwill create over 18,000 high-wage jobs in construction andmanufacturing while providing a stable supply of NorthAmerican energy to consumers in the United States.
AEM, ARA Call Oil Sands Industry TradeMission in Calgary, Canada, a Success
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 79
1128 Hwy 70 WestGarner, NC 27529
919/772-2121Fax 919/779-5432
3604 Highway 264EGreenville, NC 27834
252/758-4403Fax 252/758-6508
3816 Martin Luther King BlvdNew Bern, NC 28562
252/638-5838Fax 252/638-2949
5039 US 301 SouthFayetteville, NC 28348
910/424-1200Fax 910/424-8763
Northside Industrial ParkWilmington, NC 28429
910/675-9211Fax 910/675-3640
Highway 42 Aulander RoadAhoskie, NC 27910
252/332-5550Fax 252/332-4186
Flint Equipment Company1206 Blaylock St. Albany, GA 31705
229/888-1212Fax: 229/435-3612
180 Princeton Blvd.Adairsville, GA 30103-2628
770-773-9857Fax: 770-773-7226
4500 Wendell Dr. SWAtlanta, GA 30336-1627
404/691-9445Fax: 404/696-1170
5333 BBS WayBraselton, GA 30517-1707
770-965-1889Fax: 770-965-1894
251 Perry Lane Road Brunswick, GA 31525
912-264-6161Fax: 912-264-5263
2400 Victory Dr.Columbus, GA 31902-3457
706/687-3344Fax: 706/682-4738
515 Chamblin Rd. Grovetown, GA 30813-3905
706/855-5440Fax: 706/855-5447
136 Acres DriveLadson, SC 29546
843/572-0400Fax: 843/572-7746
4600 Pio Nono AveMacon, GA 31206-5064
478/788-1586Fax: 478/781-8591
7566 W. TENNESSEE ST. Tallahassee, FL 32304
850/575-5600Fax: 850/575-9972
3033 US Highway 27 East Perry, FL 32348850/584-9200
Fax: 850/584-2844
169 Ross Clark Circle N.E. Dothan, AL 36303
334/794-8691Fax: 334/794-8696
50 Morgan Industrial Blvd. Garden City, GA 31408
912/964-7370Fax: 912/964-1822
1220 Henderson HWY Troy, AL 36081 334/566-4181
Fax: 334/566-4361
4900 East Highway 501 Aynor, SC 29511
843/358-5688Fax: 843/358-2826
116 Corporate Drive Simpsonville, SC 29681
864/963-5835Fax: 864/963-7405
4717 Jefferies Hwy Walterboro, SC 29488
843/539-1420Fax: 843/539-1424
3464 Sunset Boulevard West Columbia, SC 29169
803/794-9340Fax: 803/794-9346
178 Seaboard RoadAndrews, SC 29510
843/221-4940Fax: 843/221-4942
EquipmentCompany
t h e C O L O R o f Q U A L I T Y
new crop of Dash-5 excavators.See your Hitachi dealer today about the exciting
digging force, and lift capacities.running, greaterengines while maximizing your productivity with smooth-Be fuel efficient with clean-burning Interim T
new crop of Dash-5 excavators.See your Hitachi dealer today about the exciting
digging force, and lift capacities.-than-ever horsepower greater r-than-ever horsepower
engines while maximizing your productivity with smooth-Be fuel efficient with clean-burning Interim T
Tier 4-certified
new crop of Dash-5 excavators.See your Hitachi dealer today about the exciting
digging force, and lift capacities., arm force,-than-ever horsepower
engines while maximizing your productivity with smooth-ier 4-certified ning Interim T
engines while maximizing your productivity with smooth-ier 4-certified
.hitawwww.hitachiconstruction.com
new crop of Dash-5 excavators.
t h e C O L
.hitachiconstruction.com
new crop of Dash-5 excavators.
A L I T Y
new crop of Dash-5 excavators.
UO R o f Qt h e C O L
A L I T Y
Page 80 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
chairman of the National Association ofHome Builders (NAHB) and a home builderfrom Gainesville, Fla. “This solid growth isan encouraging sign that housing continueson a slow but steady recovery path that isgradually advancing from one local marketto the next.”“More metros across the country are
experiencing a sustained uptick in houseprices, employment and new building activ-ity as rising consumer confidence in localmarket conditions pushes more people toconsider a new-home purchase,” observedNAHB Chief Economist David Crowe.“That said, overly tight lending conditionsfor builders and buyers continue to slow thisprocess considerably.”“Combined with recent positive reports
on builder confidence, housing starts andnew-home sales, the September IMI adds tothe growing consensus that housing is final-ly moving in the right direction, which inturn is spurring more potential buyers to getoff the fence,” added Kurt Pfotenhauer, vice
chairman at First American Title InsuranceCompany.The IMI is designed to track housing mar-
kets throughout the country that are showingsigns of improving economic health. Theindex measures three sets of independentmonthly data to get a mark on the topimproving Metropolitan Statistical Areas.The three indicators that are analyzed areemployment growth from the Bureau ofLabor Statistics, house price appreciationfrom Freddie Mac and single-family housingpermit growth from the U.S. Census Bureau.NAHB uses the latest available data fromthese sources to generate a list of improvingmarkets. A metropolitan area must seeimprovement in all three measures for atleast six months following those measures’respective troughs before being included onthe improving markets list.A complete list of all 99 metropolitan
areas currently on the IMI, and separatebreakouts of metros newly added to ordropped from the list in September, is avail-able at www.nahb.org/imi.
IMI Also Indicates More MetroAreas Show Signs of Recovery
HOUSING from page 1
AERIAL LIFTS
Manlifts
GRADALL / LULLSales - Service - Training
Modern EquipmentSales & Rental800-445-4381
ASPHALT EQUIPMENT
Asphalt Rollers
2007 Dynapac CA150D, 66inch, 20,000 lbs., soil roller,ROPS and vandal cover,very good condition, 91hours.....................$79,900.
847-437-8686
Milling Machines
2006 Dynapac PL2000, 80''planer, front loading convey-or, good condition, 3423hours ..................$189,900.2006 Dynapac PL500, 30''planer, 20'' drum, very goodcond, 2780 hrs.......$47,500.
Casey Equipment Co.847-437-8686
COMPACTION EQUIP.
Pneumatic Rollers
2006 Vibromax VM1500,33'' drum width, trenchroller, 23 hp, 3600 lb operat-ing wt., low hours. Picturesavailable.......................Call
908/625-0697
CRANES
Crane Inspections
ALL TYPES OF CRANESINSPECTED AND
CERTIFIED
Accredited by the USDept. of Labor Under29CFR Part 1919 and
Accredited by CALOSHA
Call 215-639-2579Atlantic Crane
Inspection ServicesVisit us at
www.atlanticcrane.com
EXCAVATORS
Hydraulic Excavators
NH ConstructionEquipment
New & UsedParts & Service
Modern EquipmentSales & Rental800-445-4381
Mini Excavators
NH ConstructionEquipment
New & UsedParts & Service
Modern EquipmentSales & Rental800-445-4381
FORKLIFTS
Industrial Forklifts
GRADALL / LULLSales - Service - Training
Modern EquipmentSales & Rental800-445-4381
Rough Terrain Forklifts
2010 JCB 930-4, canopymodel, 4WD, 6000 lb liftcapacity, 22 ' mast, 48''forks. Pictures available.Low hours ............$33,000.
908-625-0697
GENERATORS & GEN
SETS
Generators & Gen Sets
2008 Ingersoll Rand G290,290KVA, trailer mounted,like new, 300 hours..............................$55,000.
305-945-2581
LOADERS
Backhoe Loaders
JCB 3CX-14, fully loaded,4WD, Servo controls, pow-ershift trans., Extra- Dig,pipe work loader, 1.4 ys bkt& 21'' bucket, mint, lowhours ...........................Call
908-625-0697
Wheel Loaders
NH ConstructionEquipment
New & UsedParts & Service
Modern EquipmentSales & Rental800-445-4381
Track Loaders
2006 JCB 1110T, 84 turbocanopy model, new 17''tracks, Servo controls, hydpump (new), good condi-tion, 1100 hours..............................$32,500.
908-625-0697
TELEHANDLERS
Telescopic Handlers
2011 Case 586G, 4WD,straight mast, all terrainforklift, 16' mast, load con-trol, excellent cond., 5hours............................Call
800-432-0913
TRAINING
Operator Training
NCCCO Crane Operator Training
TowerRigger
Knuckleboom Crane
Signal Person
TRAINED AT YOURLOCATION
All trainers NCCCOCertified
Call 800-841-6189AtlanticCrane InpectionServicesVisit us
atwww.atlanticcrane.com
Are your operators compli-ant with Federal Standards,
OSHA, ANSI, ISO?
MODERN GROUP offers training for:
Front-end Loaders & Backhoes
Aerial work platforms (AWP)(Boom & Scissor Lifts)
Rough Terrain Forklifts (Gradall, Lull, JCB)
Skid Steer Loaders
For information, pricing orreservations:
Call 1-800-223-3827www.moderngroup.com
All prices include Trainer,travel and material
NO HIDDEN COSTS
TRENCHING EQUIPMENT
Trenchers
2009 Stone Bulldog TR34,new, unused, remote opera-tion, 34'' drums, 0 hours............................$28,500.
336-685-4998
Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.For just an additional $20 your ad can be posted on our online
searchable database for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland DriveFort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200
CLASSIFIEDSSEE YOUR SEE YOUR
BARGAIN AD BARGAIN AD ININ COLOR.COLOR.
ONLY $50 EXTRAONLY $50 EXTRAFOR 2 INSERTIONS
The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95
Here's how the BARGAIN ADS Work:• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.
• Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.
• Cost is $95 per ad, $50 additional for color.
• Your ad will run for two consecutive issues in 1 region.
Your Ad Will Be Seen By Over 24,273 Construction Equipment Buyersin the Southeast States.
For more information, call Construction Equipment Guide today at
800/523-2200
Prevent theft, vandalism, and unauthorized borrow-ing of your skid loaders! Lock both drive controls ofall skid loaders. Receive $50 off your Skidsteer Lockorder. Call or use coupon code CEGSSL at checkout.
The Equipment Lock CompanyVisit www.equipmentlock.com
or call toll free 1.866.Lok it up (565-4887) 20-21 AP
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 81
KOMATSU DOZERS | I AM LOOKINGFOR THE FOLLOWING USED KOMATSUDOZERS: D 6 5 D 8 5 D 1 5 5 EMAIL USWITH PICTURES, SERIAL NUMBER,YEAR MODEL, PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:SALE@ALWAFAEQUIPMENT.COM––––––––––––––––––––––––––––––––BOBCAT BRAND SKID STEER LOAD-ERS LOCATED IN THE SOUTH EAST-ERN UNITED STATES | AM PAYINGCASH FOR BOBCAT BRAND SKIDSTEER LOADERS. ESPECIALLY LOOK-ING FOR LARGE FRAME AND "GOLDPACKAGE" MACHINES, BUT ANY MAKEAND MODEL BOBCAT WILL BE CONSID-ERED. PLEASE SEND PHOTO AND ASK-ING PRICE. ***DEALERS NEED NOTRESPOND***CONTACT: WARRENEMAIL: TWOPETIES@AOL.COM––––––––––––––––––––––––––––––––KOMATSU BR380JG1 & BR580 TRACKJAW CRUSHERS | LATE MODEL LOWHOUR WORK READY USA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: CMISOLD@COMCAST.NET––––––––––––––––––––––––––––––––CATEPILLAR 3412 | HELLO I AM LOOK-ING FOR THE SPIDER ASSEMBLY ANDTHE SHAFT INPUT FOR THE 3412CATERPILLAR. THE SPECS ARE ASFOLLOWS: SERIAL # 60M03370ARRANGEMENT# 4N2247 CLUTCHDESCRIPTION: MODEL# GM518-1 SERI-AL # 3R5140 BOM# 37705 RATIO# 6.48:1I AM LOOKING FOR THEM NEW ORUSED.CONTACT: ROBIN MILLERPHONE: 7867525438EMAIL:ROBIN_MILLER@RKSTRADING.COM––––––––––––––––––––––––––––––––YANMAR EXCAVATORCONTACT: JOHN SARAPPAPHONE: 856 767 1122FAX: 856 767 4931EMAIL: JOHN@SARAPPA.COM––––––––––––––––––––––––––––––––MAS HEAVY EQUIPMENT | LOOKINGFOR EXCAVATOR DAEWOO OR DOS-SAN 290 LCV/300LCV/420LCV/470LCVCATERPILLAR 235 C OR D /225 SAM-SUNG 280-2 WHEEL LOADER CATER-PILLAR 920-930-936-950-966D E F -970F966G -972G-980G-980F DOZER CATER-PILLAR D9N&D10N KOM. 355CONTACT: MODY SHOUKRYPHONE: 8155435252 FAX: 8153986715EMAIL:MSHOUKRY9@GMAIL.COM––––––––––––––––––––––––––––––––HYDRAULIC DRIVE MOTOR FOR ADITCH WITCH 5020 TRENCHER |DESCRIBE WHAT YOU WANT.CONTACT: RICHARD SPRIGGSPHONE: 423-487-5048 EMAIL: RSPRIGGS@PLEASECALLNUM-BER.COM––––––––––––––––––––––––––––––––NEEDED FAST KOMASTU 155A X 6 2009WITH RIPPER USER LOW LOW HOURS INEED 2CONTACT: JEAN MAURICE BOUTINEMAIL: JEANMAURICEBOUTIN@BULL-DOZERJM.COM––––––––––––––––––––––––––––––––
WE BUY EQUIPMENT MANUALS | WEBUY ALL KINDS OF CONSTRUCTION,FARM AND HEAVY EQUIPMENT MANU-ALS. I PREFER TO BUY 100 OR MOREMANUALS PREFERRABLY FROM BUSI-NESS COMPANIES. IF YOU’RE TIREDOF LOOKING AND STORING EXCESSMANUALS, PLEASE GIVE ME A CALL AT270-849-2270 OR EMAIL AT TRI-TOWN1@MSN.COM. THANKS GRACECONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: TRITOWN1@MSN.COM––––––––––––––––––––––––––––––––WATER TRUCK | NEED USED WATERTRUCK. 10, 000-15, 000 CAP. MINE SITESPEC IF POSSIBLECONTACT: ROB KOHLERPHONE: 0411277332EMAIL:KORECRANES2@OPTUSNET.COM.AU––––––––––––––––––––––––––––––––LEFT REAR PLANATARY FOR CASE721C | DESCRIBE WHAT YOU WANT.CONTACT: J. R. WALLINPHONE: (281) 844-8489FAX: (979) 921-0020EMAIL:WALEXCSERV@AOL.COM––––––––––––––––––––––––––––––––FT REAR PLANATARY FOR CASE 721CCONTACT: J. R. WALLINPHONE: (281) 844-8489FAX: (979) 921-0020EMAIL:WALEXCSERV@AOL.COM––––––––––––––––––––––––––––––––NEEDED BULLDOZER D7H FROM EASTCOAST USER I NEED 3CONTACT: JEAN MAURICE BOUTINPHONE: 1-450-346-8975EMAIL:JEANMAURICEBOUTIN@BULL-DOZERJM.COM––––––––––––––––––––––––––––––––BOMAGCONTACT: KENNYEMAIL: NDALA.KENNY@GMAIL.COM––––––––––––––––––––––––––––––––ANY TRACK MACHINE CONSIDEREDCONTACT: DAYNAPHONE: 832-603-2097EMAIL: AEXPTRANSPORT@LIVE.COM––––––––––––––––––––––––––––––––DUSTLESS BLASTER MODEL DB500CONTACT: MICHAELPHONE: 314-796-6558EMAIL: MPAZ56MO@GMAIL.COM––––––––––––––––––––––––––––––––( 3 ) CAT 769C OR TEREX R50 OR CAT773B TRUCKS | WORK READY TRUCKS,MIDWEST LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: CMISOLD@COMCAST.NET––––––––––––––––––––––––––––––––TEREX TA30 GEN 7 OFF ROAD TRUCKS| (2 ) 2007-2008 TRUCKS, MAX. 3500HOURS, CLEAN WORK READY, USALOCATIONCONTACT: RICHARDPHONE: 603-828-6100EMAIL: CMIEQUIP@YAHOO.COM––––––––––––––––––––––––––––––––SCAFFOLDS, STAGE SWINGS, CEMENTMIXERSCONTACT: GILROY ALBURYPHONE: 242-468-4488EMAIL: GILROYJR06@HOTMAIL.COM––––––––––––––––––––––––––––––––
BOBCAT BRAND SKID STEER LOAD-ERS LOCATED IN THE SOUTH EAST-ERN UNITED STATES | AM BUYINGBOBCAT SKID STEER LOADERS, PRE-FER LARGE FRAME MACHINES AND"GOLD PACKAGE" UNITS, HOWEVERANY BOBCAT SKID STEER LOADERWILL BE CONSIDERED. SEND PHOTOSAND ASKING PRICE.***DEALERS NEED NOT RESPOND***CONTACT: WARRENEMAIL: TWOPETIES@AOL.COM––––––––––––––––––––––––––––––––SERVICE MANUAL FOR CAT 303C CRCONTACT: KEVIN SANSALONEPHONE: 856-297-4758EMAIL:KEVIN@SANSALONEEXCAVAT-ING.COM––––––––––––––––––––––––––––––––NEED ALL 12 MONTHS BULLDOZER D3AT D10 FROM USER USA INSPECTIONBULLDOZERCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL:JEANMAURICEBOUTIN@BULLDOZERJM.COM––––––––––––––––––––––––––––––––USED EXCAVATOR PART | SWINGMOTOR FOR A JOHN DEERE 690CEXCAVATOR IT IS A COMMERCIALINTERTECH #323-9210-011 JD PART #AT77614CONTACT: LOREN LINDLPHONE: 920.650.3870EMAIL: LORDON1@CENTURYTEL.NET––––––––––––––––––––––––––––––––KOMATSU D51EX22 TRACK DOZER | AIRCAB, 1000 +/- HOURS, USA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: CMIEQUIP@YAHOO.COM––––––––––––––––––––––––––––––––CASE 580 LOADER BACKHOES |MODEL 580 K SK L SL M SMSCONTACT: FRANK, TRICO EQUIPMENTPHONE: 800-654-USED (8733) EXT. 1230FAX: 732-780-3618EMAIL:FHORAN@TRICOEQUIPMENT.COM––––––––––––––––––––––––––––––––MULCHER 250350 H/P | 2005-2007 BRONLH 250-400 MULCHERCONTACT: DARSENPHONE: 9174406319FAX: 9174406319EMAIL:MAFAUTOBOAT@YAHOO.COM––––––––––––––––––––––––––––––––CONSTRUCTION EQUIPMENT | FAIRLYUSED: 1) 950 & 966 CAT 2) COMPACTOR(DRUM & TIRE) 3) BULLDOZER (D6) CAT4) LOW BED 5) MACK TRUCKS (2003-2005...)CONTACT: MONTYPHONE: 646-515-7645FAX: 718-887-8575EMAIL:MONTYUWA@YAHOO.COM––––––––––––––––––––––––––––––––FOREST EQUIPMENT | BRUSH FORKSCONTACT: DENNIS TRUJILLOPHONE: 505 617 0211EMAIL: SOUTHWESTWOODPRODUCTS@YAHOO.COM––––––––––––––––––––––––––––––––LARGE EXCAVATOR | ANY BRAND,PREFERABLY GOOD TO VERY GOOD.CONTACT: DON JOHNSONPHONE: 218 784 8301FAX: 218 784 7569EMAIL:IMBROKEFARMS@GMAIL.COM––––––––––––––––––––––––––––––––
SANDVIK TITON DI 600 | LOOKING FORA SECOND HAND SANDVIK TITON DI600, FROM YOM 2005 UPWARDS, INGOOD CONDITIONCONTACT: ALIDADPHONE: 004916098648980EMAIL: POURYA_HCL@YAHOO.COM––––––––––––––––––––––––––––––––LOOKING FOR THE FOLLOWING USEDKAWASAKI LOADERS. 5 0 Z-II, 5 0 Z-IV,5 0 Z-V 6 0 Z-II, 6 0 Z-IV, 6 0 Z-V 6 5 Z-II,6 5 Z-IV, 6 5 Z-V 7 0 Z-II, 7 0 Z-IV, 7 0 Z-V8 0 Z-II, 8 0 Z-IV, 8 0 Z-V 8 5 Z-II, 8 5 Z-IV,8 5 Z-V 9 0 Z-II, 9 0 Z-IV, 9 0 Z-V 9 5 Z-II,9 5 Z-IV, 9 5 Z-VCONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:SALE@ALWAFAEQUIPMENT.COM––––––––––––––––––––––––––––––––305 CAT EXCAVATORCONTACT: SOLOMON JACKPHONE: +447024065565EMAIL:UNLIMITEDEQUIPMENTS@GMAIL.COM––––––––––––––––––––––––––––––––MOTOR GRADER 140G KOMATSUCONTACT: LEONARD MKUMBIPHONE: 0754561164FAX: 0263121EMAIL:MKUMBILEO4@YAHOO.CO.UK––––––––––––––––––––––––––––––––WE ARE LOOKING FOR A 35-45 TONGROVE ROUGH TERRAIN CRANECONTACT: HAENER CRANE &EQUIPMENTPHONE: 1-800-746-8106EMAIL: HAENERCRNE@LEWISTON.COM––––––––––––––––––––––––––––––––I AM LOOKING FOR 2 SULLAIR AIRCOMPRESSORS IN GOOD GOODWORKING CONDITION. 2000-2003, 750CFM, 150 PSI, AFTERCOOLED AND FILTERED, CAT DIESEL 3306,PORTABLE HIGHWAY TRAILERCONTACT: PEDRO LIPHONE: 323-707-6063EMAIL: PEDROMLI@IMPORTSAMERICAS.COM––––––––––––––––––––––––––––––––NEEDED BULLDOZER D4H D5H D6HLOW LOW HOURS USER LGP ORSTRAIGHT PADS USA USERCONTACT: JEAN MAURICE BOUTINPHONE: 1-450-346-8975EMAIL: JEANMAURICEBOUTIN@BULLDOZERJM.COM––––––––––––––––––––––––––––––––KOMATSU BR380 JG1 TRACK JAWCRUSHER • LATE MODEL, LOW HOUR,USA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: CMISOLD@COMCAST.NET––––––––––––––––––––––––––––––––KOBELCO SK80 SK135 PARTS • I NEEDA FRONT WINDOW FRAME, GLASS ANDHARDWARE FOR A KOBELCO SK80 -SK135CONTACT: MICKPHONE: 352-270-0070EMAIL: MICK.FIELDS@FIELDCO.BIZ––––––––––––––––––––––––––––––––DYNAHOE MODEL C BACKHOE • PLAN-ETARY ASSEMBLY AND DRIVE AXLENEEDED TO REPLACE STOLEN PARTSCONTACT: WILLIAM CRAIBPHONE: 518-658-2639EMAIL: PZCWHC@HOTMAIL.COM––––––––––––––––––––––––––––––––
USED LEFT DOOR FOR 2004 KUBOTARTV900 2004 MO HARD DOOR.CONTACT: P SMITHPHONE: 203-586-8712EMAIL: MIMISMITH0722@YAHOO.COM––––––––––––––––––––––––––––––––HYDRAULIC HAMMER/ DROP HAMMER• WTB WORKING OR NON WORKINGHAMMERS ANY SIZE LARGE OR SMALLNO DEALERS PLEASECONTACT: JAMES MANNPHONE: 404-273-9424FAX: 770-306-2962EMAIL: JAMES2525@MSN.COM––––––––––––––––––––––––––––––––53X102 DROP DECK FLATBED • 53X102"AIR RIDE, AIR SPREAD, ALUMINUM/STEEL COMBO OR ALL STEEL DROPDECK FLATBED. MUST HAVE RECENTDOT INSPECTION. PREFER TELE-PHONE CONTACT @918-351-4646.CONTACT: IANPHONE: 918-351-4646EMAIL: MAKMAIL@MAKADAMGROUP.COM––––––––––––––––––––––––––––––––QUICK CONNECT FOR 305 CAT EXCAVATORCONTACT: JAKE DERRPHONE: 609-868-8759FAX: 856-845-5012EMAIL: DERRANDSON@YAHOO.COM––––––––––––––––––––––––––––––––NEED TO BUY THE FOLLOWING CATMOTOR GRADERS: 140G (1989, 1994,1995, WITH RIPPER) 140H (2000-2002)14G/H (1972 UP)CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL: SALE@ALWAFAEQUIPMENT.COM––––––––––––––––––––––––––––––––**WANTED** BOBCAT SKID STEERLOADERS AND MINI EXCAVATORS | AMINTERESTED IN BUYING BOBCATSLOCATED IN THE S.E. UNITED STATES.PREFER LARGE FRAME MACHINESS320, S300, S250, T320, T300, T250.PREFERENCE GIVEN "GOLD PACK-AGE" MACHINES BUT ANY SIZE BOB-CAT WILL BE CONSIDERED. PLEASESEND RECENT PHOTO AND ASKINGPRICE. DEALERS NEED NOT RESPOND.CONTACT: WARRENEMAIL: TWOPETIES@AOL.COM––––––––––––––––––––––––––––––––WOOD CHIPPERCONTACT: SCOTTPHONE: 516-509-0335FAX: 631-998-3897EMAIL: LANDZIGN1@AOL.COM––––––––––––––––––––––––––––––––LOOKING FOR USED STREETPRINTINFRARED HEATERS, STREET HEATTHEY ARE CALLEDCONTACT: PAUL POLITOPHONE: 1-520-292-1125EMAIL: PAUL@TUCSONASPHALT.COM––––––––––––––––––––––––––––––––LOOKING TO PURCHASE THE FOLLOW-ING CATERPILLAR WHEEL LOADERS.930 (1978-1986) 936 (1984-1992) 938G(AROUND YEAR 2005) 950B/E/G (1984 UP,FULL STEERING) 966C/D/E/F-II/G (1979UP, FULL STEERING) 980C/F (1988 UP)CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:SALE@ALWAFAEQUIPMENT.COM––––––––––––––––––––––––––––––––
TRANSMISSION ASSEMBLY | WE ARELOOKING FOR A TRANSMISSIONASSEMBLY SUITABLE THE FOLLOWINGMITSUBISHI 330 MOTOR GRADER. THEINFO AVAILABLE FOR THE MOTORGRADER IS AS UNDER. SERIAL # OFGRADER MG003231, ENGINE SERIAL #75761, MACHINE # 3QA00515, TRANS-MISSION # 60325 - 80111, MODEL 3-5-93CONTACT: ANIS SHERWANIPHONE: +923214696007FAX: +92 42 35887118EMAIL: ASHERWANI@SASCOM.PK––––––––––––––––––––––––––––––––MINI EXCAVATOR | SMALL MINI EXCA-VATOR FOR PERSONAL USE AT HOMENOT FOR BUSINESSCONTACT: TIM HAWKINSEMAIL: DARTIM76@YAHOO.COM––––––––––––––––––––––––––––––––BACKHOE ATTACHMENT FOR JD 401DTRACTOR. J D MODEL # FOR HOE IS9250ACONTACT: MARK BEYERPHONE: 707 538 0413EMAIL: GAMMYRAY@SONIC.NET––––––––––––––––––––––––––––––––SPECIALLY CAT MANUAL WHEELLOADER | REGULAR REQUIREMENT OFMENTIONED MACHINES. (WE BUY FOROUR OWN STOCK TIME TO TIME) MAR-KET MEET MACHINERY: CAT 910, 920,930, 950, 950B, E & 966D, E AND 966F.CAT GRADER 140G S/N:10, 000 UP.DYNAPAC ROLLERS CA251D, CA262D,CA301D [PAD FOOT TYPE ALSO WORKS]JCB TELEHANDLER 550 1999~2005HITACHI EXCAVATOR EX200-1,EX100WD-1, EX60WD-1, UH07-7, UH083KOMATSU EXCAVATOR PC 200-6, -7. CONTACT: IKRAM KHANPHONE: +923002831078EMAIL:IUKANDCO@GMAIL.COM––––––––––––––––––––––––––––––––LOOKING FOR D10N OR D10R WITHBAD OR NO ENGINE.CONTACT: J. R. WALLINPHONE: 281-844-8489FAX: 979-921-0020EMAIL: WALEXCSERV@AOL.COM––––––––––––––––––––––––––––––––KOMATSU BR380 JG1 TRACK JAWCRUSHER | LATE MODEL, LOW HOUR,WORK READY. USA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: CMISOLD@COMCAST.NET––––––––––––––––––––––––––––––––325, 330, CL, BL | I NEED DOZER D7G,D8K, D6H, D6R WITH RIPPERS I NEEDLOT OF OTHER EQUIPMENT, PLEASEEMAIL ME COMPLETE LISTCONTACT: ISMAIL USMANPHONE: 4094541576EMAIL: ISRAEQUIPMENT@AOL.COM––––––––––––––––––––––––––––––––DOZER | 5 UNITS D5B DOZERS, CABOR OROP, 5 UNITS OLD 930 WHEELLOADERS, 2 X 730 TRUCKS UP TO10,000 HOURS.CONTACT: JEFF WILLISONPHONE: 918-449-1966EMAIL: JEFFWEQUIPCO@TULSACOXMAIL.COM––––––––––––––––––––––––––––––––
Attention Contractors!Post Your Wanted To Buy Listings FREE!
Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website
for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings.
Page 82 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALEX LYON & SON
AUCTIONEERS
www.lyonauction.com
315-633-2944�
• Detroit, MIFri.,�October�5,�2012For:�ConstructionEquipment,�Trucks,Trailers,�Support
• Boston, MASat.,�October�6,�2012For:�Major�Job�CompletionAuction
• Houston, TXThurs.,�October�11,�2012For:�ConstructionEquipment,�Aerials,Forklifts,�Large�WaterPumps
• Sacramento, CASat.,�October�13,�2012For:�ConstructionEquipment,�Trucks�andTrailers
• Odessa, TXSat.,�October�13,�2012For:�ConstructionEquipment,�Trucks,Trailers,�Support
• Putney, VTSun.,�October�14,�2012For:�Complete�LiquidationSanta’s�Land�AmusementPark
• Baltimore, MDThurs.,�October�18,�2012For:�Construction,�AsphaltEquipment�and�Trucks
• Kissimmee, FLWed.,�October�24,�2012For:�ConstructionEquipment,�Support,Attachments,�Aerial�andForklifts
• Portland, ORThurs.,�October�25,�2012For:�ConstructionEquipment,�Support,Trucks�and�Trailers
• Cobleskill, NYSat.,�October�27,�2012For:�ConstructionEquipment
• San Bernardino, CAFri.,�November�2,�2012For:�Construction,�Aerials,Support�and�ServiceTrucks
• Syracuse, NYSat.,�November�3,�2012For:�Late�Model�RentalFleet�ConstructionEquipment
• Racine, WISat.,�November�10,�2012For:�Late�ModelConstruction�and�SupportEquipment
• Houston, TXTues.,�November�13,�2012For:�ConstructionEquipment,�Forklifts,Aerial�Lifts,�Trucks�andTrailers
• Barranquilla, ColumbiaSat.,�November�24,�2012For:�Late�ModelConstruction�and�SupportEquipment
• Kissimmee, FL
Sat.-Sun.,�February�2-10,
2013
For:�Annual�9�Day
Auction!�Construction
Equipment,�Trucks,
Trailers,�Support
RITCHIE BROS.
AUCTIONEERS
www.rbauction.com
402-421-2631
• Hartford, CT
October�4,�2012
• El Paso, TX
October�10,�2012
• Chicago, IL
October�11,�2012
• Sacramento, CA
October�12,�2012
• Moultrie, GA
October�19,�2012
• Tipton, CA
October�19,�2012
• Northeast, MD
October�23,�2012
• Orlando, FL
October�25,�2012
• Pittsburgh, PA
November�8,�2012
• Atlanta, GA
November�29,�2012
CAT AUCTION SERVICES
www.catauctions.com
866-750-9432�
• ONLINE ONLY
October�10,�2012
For:�Construction
Equipment
• Gallup, NM
October�11,�2012
For:�Construction/Mining
Equipment
• Richmond, VA
October�18,�2012
For:�Construction/Mining
Equipment
• Denver, CO
October�25,�2012
For:�Construction
Equipment
DARELL DUNKLE
& ASSOCIATES
AUCTIONEERS INC.
www.dunkleauctioneers.com
�800-433-6670
• Harrison, MI
Thurs.,�October�5,�2012
For:�Fall�Contractors
Auction
DAVIS AUCTIONS
www.davisauctionsinc.com
�203-758-4087
• Prospect, CT
October�13,�2012
For:�Construction
Equipment
• Prospect, CTDecember�8,�2012For:�ConstructionEquipment
DEL PETERSON
& ASSOCIATES
www.delpeterson.com
�800-492-9090
• Online Only
Closing�October�23,�2012
For:�Construction
Equipment,�Trucks�&
Trailers
• Online Only
Closing�November�20,
2012
For:�Construction
Equipment,�Trucks�&
Trailers
• New Ross, IN
Thurs.,�December�6�2012
For:�Farm�Equipment
• Online Only
Closing�December�18,
2012
For:�Construction
Equipment,�Trucks�&
Trailers
• Online Only
Closing�February�5,�2013
For:�Late�Model�John
Deere�Farm�Equipment
HUNYADY
AUCTION COMPANY
www.hunyady.com
�800-233-6898
• Sewickley, PA
Thurs.,�October�11,�2012
For:�Complete�Liquidation
Penfield�Contracting
• Wind Gap, PA
Wed.,�October�24,�2012
For:�Late�Model,�Off
Lease�Equipment
• Hellertown, PA
Wed.,�November�7,�2012
For:�Complete�Liquidation
Valley�Excavating�&
Paving�Inc.
INSIGHT AUCTIONEERS
www.insightauction.com
�863-386-1225
• Sebring, FL
Sat.,�November�10,�2012
For:�Farm�and
Construction�Equipment
Auction
IRAY AUCTIONS
www.iraymn.com
�320-968-7230
• Foley, MN
Fri.,�November�30,�2012
IRON PLANET AUCTIONS
www.ironplanet.com
�888-433-5426
ONLINE�AUCTIONS
Go�to�www.ironplanet.com
to view the complete auc-
tion schedules, inspection
reports and to place your
bid!
• ONLINE ONLYOctober�4,�2012For:�ConstructionEquipment
• ONLINE ONLYOctober�10,�2012For:�ConstructionEquipment• ONLINEONLYOctober�11,�2012For:�ConstructionEquipment
• ONLINE ONLYOctober�18,�2012For:�ConstructionEquipment
• ONLINE ONLYOctober�24,�2012For:�ConstructionEquipment
• ONLINE ONLYOctober�25,�2012For:�ConstructionEquipment
ITL AUCTIONEERING
www.itlauctions.us
508-824-3262
• Taunton, MASat.,�October�20,�2012For:�ConstructionEquipment
KEENAN
AUCTION COMPANY
www.keenanauction.com
207-885-5100
• Scarborough, METhurs.,�October�11,�2012For:�ConstructionEquipment,�Screeners,Dump�Trucks�&�Vehicles
MARTIN & MARTIN
AUCTIONEERS, INC.
www.mmaauction.com
�800-763-2728
• Starkville, MSSat.,�October�6,�2012For:�Forestry�Equipment
• Pelzer, SCWed.,�October�17,�2012For:�Construction�andFarm�Equipment
• Brooklyn, MSSat.,�October�20,�2012For:�ConstructionEquipment,�Trucks,Trailers�and�Tools
• Bristol, VA
Wed.,�October�24,�2012
For:�Construction
Equipment,�Trucks,
Trailers�and�Tools
• Mt. Hope, WV
Thurs.,�October�25,�2012
For:�Construction
Equipment,�Trucks�and
Trailers
• Danielsville, GA
Fri.,�November�2,�2012
For:�Construction�and
Farm�Equipment
MEEKINS AUCTION
COMPANY
www.meekinsauction.com
�800-499-6560
• Lumberton, NC
Sat.,�November�24,�2012
For:�Construction
Equipment
• Wilson, NC
Thurs.,�January�31,�2013
For:�Construction
Equipment
MOTLEY’S AUCTION
& REALTY GROUP
www.motleys.com
�804-232-3300
• Richmond, VA
Fri.,�October�12,�2012
For:�Construction
Equipment�and�Trucks
MYRON BOWLING
AUCTIONEERS, INC.
www.myronbowling.com
�513-738-3311
• Eden, MD
Thurs.,�October�18,�2012
For:�Complete�Liquidation
American�Paving�Corp.
PETROWSKY
AUCTIONEERS INC.
www.petrowskyauctioneers.com
�860-642-4200
• Newark, NJ
Wed.,�October�10,�2012
For:�Heavy�Construction,
Bridge�&�Road�Rehab
Equipment
• Columbus, OH
Thurs.,�October�18,�2012
For:�Construction�and
Paving�Equipment
• Moosup, CT
Fri.,�October�16,�2012
For:�Construction
Equipment,�Trucks�&
Trailers
PURPLE WAVE AUCTION
www.purplewave.com
�866-608-9283
• ONLINE ONLY
Tues.,�October�9,�2012
For:�Government
Equipment
• ONLINE ONLY
Thurs.,�October�11,�2012
For:�Construction
Equipment
• ONLINE ONLY
Tues.,�October�25,�2012
For:�Construction
Equipment
QUARRICK EQUIPMENT
& AUCTIONS INC.
www.josephfinn.com
�724-439-1621
• Uniontown, PA
Thurs.,�October�4,�2012
For:�Construction�and
Farm�Equipment
ROY TIETSWORTH
AUCTIONEERS
www.tietsworth.com
�585-243-1563
• Rochester, NY
Sat.,�October�6,�2012
For:�Municipal/Contractor
Auction
SALES AUCTION
COMPANY, LLC
www.salesauctioncompany.com
�860-627-7506
• Windsor Locks, CT
Sat.,�October�6,�2012
For:�Construction
Equipment,�Trucks,
Trailers
STEFFES
UCTIONEERS INC.
www.steffesauctioneers.com
�701-237-9173
• Online Only
October�1-9,�2012
For:�Construction, Ag,
Trucks & Vehicles
• Online Only
November�1-12�2012
For:�Construction, Ag,
Trucks and Vehicles
• West Fargo, ND
Wed.,�November�28�2012
For:�Construction and
Farm Equipment
TAYLOR AUCTION
& REALTY, INC.
www.taylorauction.com
662-226-2080
• Grenada, MS
Sat.,�October�13,�2012
For:�Annual�Fall�Auction
THE AUCTION COMPANY
www.theauctioncompany.net
951-657-5300�
• Southern CA
Sat.,�October�13,�2012
For:�Construction
Equipment,�Trucks,
Trailers
• Northern CA
Sat.,�October�13,�2012
For:�Construction
Equipment,�Trucks,�Govt.
Vehicles
• Northern CA
Sat.,�November�17,�2012
For:�Construction
Equipment,�Trucks,�Govt.
Vehicle
• Southern CA
Sat.,�December�8,�2012
For:�Construction
Equipment,�Trucks,
Trailers
• Northern CA
Sat.,�December�15,�2012
For:�Construction
Equipment,�Trucks,�Govt.
Vehicles
UNITED AUCTIONEERS
& APPRAISERS
www.uaa-auctions.com
�517-202-9173
• Charlotte, MI
Thurs.,�October�18,�2012
For:�Delta�Electrical
Contractors
• Wilmington, DE
Fri.,�October�26,�2012
For:�Construction�&�Utility
Equipment
UTILITY AUCTIONS
www.utilityauctions.net
�302-530-9103
• Charlotte, MI
Thurs.,�October�18,�2012
For:�Commercial/Industrial
YODER & FREY
AUCTIONEERS, INC.
www.yoderandfrey.com
�419-865-3990
• Lenox, MI
Thurs.,�October�25,�2012
For:�Construction
Equipment,�Trucks
Tractors,�Gravel�Trains�&
Trailers
WESTERN
CONSTRUCTION
AUCTIONS INC.
www.wca-online.com
�760-731-7760
• Perris, CA
Thurs.,�October�11,�2012
For:�Heavy�Equipment
AuctionsComing
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 83
Online Auctions
California Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change. Copyright © 1999-2012 IronPlanet, Inc. All Rights Reserved. IronPlanet®, IronClad Assurance® and Auctions you can trust® are registered service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.
Call 855-685-5491 to add your equipment to these online auctions for faster, more profitable sales than traditional auctions.
A better way to sell your equipment
2004 CAT CS-563E
2010 TOYOTA 8FGCU25
CAT 621B
2000 JOHN DEERE 310E 4X4
2009 CAT 297C
CAT 992C
1998 CAT 963B LGP
2008 CAT D6K LGP
KOMATSU PC400LC-5L
CAT 14G
2005 JLG 3369LE
TEREX R35B
SUN MON TUE WED THU FRI SAT
October Auctions
1 2 3 4 5 67 8 9 10 11 12 13
14 15 16 17 18 19 2021 22 23 24 25 26 2728 29 30 31
Online A
wwww.iructionsOnline A
onplanet.com.irw.iructions
onplanet.comuctions
OYOT2010 T
8FGCU25AOTTA
297CT2009 CA AT
D6K LGPT2008 CA AT
D6K LGP
2005 JLG 3369LE
2004 CA
CS-563ET CA AT 2000 JOHN DEERE 310E 4X4
2000 JOHN DEERE 310E 4X4
963B LGPTT 963B LGP1998 CA AT
963B LGP
14GTCAAT
Call 855-685-5491 to add y
A better w
our equipment to these online auctions Call 855-685-5491 to add y
y to sell yaA better w
621BTCAAT
our equipment to these online auctions
our equipmenty to sell y
992CTT 992CCAAT
our equipment to these online auctions
our equipment
TSU PC400LC-5LKOMAA
SUN
TSU PC400LC-5L
SUN MON TUE WED THU FRI
uc AreobtcO
1 2 3 4
TEREX R35B
FRI ATS
snoituc
5 6
y Bnapmon Coitcua AinrofilaCr mehtl ol. Acn, ItenalPnorf Io
Call 855-685-5491 to add y, m or faster r, more profitabf
i.www
empiuq. Eetao dt tsiy lranimiler. P58795207d #noy Bitcepser riehf ty otrepore phe trs adnard bns akrar m
our equipment to these online auctions Call 855-685-5491 to add yle sales than traditional auctions, more profitab
oct.enalponr
Pnor2 I102-999t © 1hgirypo. Cegnaho ct tcejbut sne.srenwe ov
our equipment to these online auctions le sales than traditional auctions
mo 568-55 8
tenalPnor. Idevreses Rthgil Rl. Acn, ItenalP ® alCnor, I
our equipment to these online auctions .le sales than traditional auctions
194-55
7142128
ecnarussd Aa ® tsurn tau cos ynoitcud An a ® ige rer a
3 47 8 9 10 11 12
14 15 16 17 18 1921 22 23 24 25 2628 29 30 31
ksra meciv serdeerts
5 612 1319 2026 27
Page 84 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
JM Wood Auction Holds Multi-Day Sale in Montgomery
Looking over a Komatsu PC 200LC are Mike Gunn(L), Carrville Gin Company, Tallassee, Ala., andTommy Burton, independent contractor, also basedin Tallassee, Ala.
A trio of nice-looking Hitachi 350 Zaxis excava-tors were in the sale lineup.
Checking under the hood of a Deere dozer ofinterest are Henry Lynn and Joey Cauthen,Regional Electric, Montgomery, Ala.
A long way from home and making the mostof his inspection time is Corey Cossey, W.A.Rasic Construction, Long Beach Calif.,checking out a Deere 624J wheel loader.
Three Cat 725 trucks rolled onand off the ramp rather quick-ly as one buyer snagged all three of them for $160,000 each.
(L-R): Philip Parker and Trip Pittman of Pittman Tractor,Daphne, Ala., discuss some machines of common interestwith Wayne Eldridge of J & W Marine, Bayou La Batre, Ala.
Test operating a Deere 450J LGP is David Moore,Construction Equipment Rental and Sales, Jackson,Tenn.
Taking a moment to discuss what’s going on in the world (L-R) areBuddy Hughes, Hughes Air Conditioning, Millbrook, Ala; RichardReid, Southern Excellence, Millbrook, Ala.; and Grady Willett, TripleW Construction, Altoona, Ala.
JM Wood Auction Company Inc.’s multi-daysale at its headquarters in Montgomery, Ala.,held on Sept. 12 and 13, was another huge suc-
cess for this year.Company representatives stated that there were
bidders from 15 countries and 34 U.S. states whopurchased more than $17 million of equipment.High on the list of items in demand were several2008 Cat 725 trucks from a Cat dealer rental fleetand a number of 2012-2009 Mack GU713 tri-axeldumps from numerous government agencies.“We had contractors from across the country
here at the auction bidding on and buying equip-ment,” said Vice President Bryant Wood. “Wehave been sending a lot of equipment overseas forthe last 36 months, but contractors from across thecountry are coming to the auctions because theyare at a point where they need to update their fleetsor reposition their fleets to the work they havegoing on. It’s very encouraging to see some ofthese contractors here at the auction whether theyare buying equipment or not, they are bidding onit…and that’s what we all want to see.”
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 85
Page 86 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Alex Lyon & Son, Martin & MartinJoin for Sept. Auction in Bremen, Ga.
Joey Martin (L), Martin & MartinAuctioneers, and Jack Lyon, Alex Lyon &Son, scan the crowd for one final bid on abackhoe loader.
Local contractor Wayne Cole (L), Temple, Ga., and Edward Rude, TMTrading, Falling Waters, W.Va., swap notes about the dozers in the sale.
The smaller dual drum Bomag rollers were a comfortable restingspot for Bobby and Deborah Miles, Texas Skid Steer, Springtown,Tex., as they wait for the skid steer auctioning to begin.
It was a picture perfect September day in Georgia anda nice turnout for the sale.
Discussing some of the Cat machines thatwere about to go on the block are JohnGorham (L), Yancey Bros. Co., Austell, Ga.,and Brian Wilson, independent equipmentdealer in Atlanta.
Watching the bidding are J.R. Atkinson, Jr. (L), J &J Truck Sales, Dry Fork, Va., and Lee Mashburn,Mashburn Equipment, Ringgold, Ga.
Phoning his office in NewYork while jotting somenotes on a JCB Loadall ofinterest is Mike Montanoof Montano EquipmentSales and Rentals,Saugerties, N.Y.
The father and son team of John (L)and Stephen J. Connolly, ATSEquipment Inc., journeyed fromNew England to see if they couldsnag some deals at this sale.
Inspecting one of the three Takeuchi TL130s in the saleis Zak Zakeri, AutoMaster, Lawrenceville, Ga.
Ajoint venture of Martin & Martin Auctioneers & Alex Lyon & SonAuctioneers resulted in another successful auction west of Atlanta inBremen, Ga., on September 19.
The sale was a one-owner complete liquidation of construction equipment,trucks, trailers, support equipment and featured a substantial paving and com-paction line up of machines.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 87
Day 1 Fri., October 12 @ 9AM
Day 2 (Online Only)Support Equipment
Commonwealth of VA, Sunbelt Rentals
Bid October 8 - October 13
Bidding Closes October 13Beginning @ 10AM
Must Register With ProxibidBidding Now Open! Bid at Home, WiFi
On-Site, Use our Bidding Station
or Absentee Bids Accepted!
Accepting Items DailyThrough 10/10.
Sell Your Idle Assets Now!
Annual Fall AuctionSat., Oct. 13th • 10:00 am
Dozer / Backhoes: 1989 Caterpillar D4C Dozer;1989 Case 580 K Backhoe; 2003 New Holland 555EBackhoe; 2000 New Holland LB75 4WD; 1992 Case580 SK Backhoe; 1998 New Holland 555 E Backhoe;1997 New Holland 555 E BackhoeExcavators: 2000 Linkbelt 2650; 2001 Bobcat325; Yanmar 27 Mini ExcavatorTelescopic Lifts: 1999 Manitou MTV 1130 Lift;2000 Genie 245/25, 4WD, Basket Man Lift; 1999 Lull644B-42 Lift; Gradall 534 C 4WD Telescopic Lift;Genie 40-49 4WD Platform Boom Lift; 1996 JLG 4 WDUtility Tractors: 2003 New Holland TC 30;Kubota L2900; Kubota L3010; Ford 1720Utility Trailers: 1994 DC Utility; 1996 Michell;1996 Shop Built 7’ x16; 2001 Enclosed, 7’ x 18’;1989 Pace 6’ x10’ Enclosed; 1998 McGraws 7’ x 16’;1999 Pipe 7’ x 16’ Flat; (2) 2003 C & W Enclosed, 6’x 16’; 1996 Utility 53’ Van Trailer; 1996 Great Dane53’ Van Trailer; Strick 53’ Van TrailerJob Office Trailers: (2) Single Axle Job SiteStorage / Office; 1991 G & S Modular Office Building/ Portable; 1991 G & S 8’ x 32’ Office Complex;
G & S Storage Unit / Portable; Modular Space JobTrailer; Mobile Office TrailerSupport Equipment: Pressure Washers, LaserEquipment, Generators, Hand Tools, Guard Fencing,Scaffolding, Fuel Tanks, Extra Backhoe Buckets City of Grenada: John Deere 6405 tractor withTiger side boom mower & John Deere MX8 rearbushog; Tractor; 1997 Ford F-Series Dump Truck;International Truck and Tymco Sweeper; MauldinSteel Wheel Roller; 1989 Ford F-350 Truck withbucket lift; 1988 Ford L-8000 Diesel Sewer Truck;Mack Tandem Axle Dump Truck; 1993 Mack FlatBed; 1997 Ford F-Series Dump Truck; CaterpillarD3B Dozer; 1990 International Bucket Truck; AsphaltLeeboy Paver / Model # L1000T; Caterpillar D6MDozerDRUG SEIZURE ITEMS!! 6 vehicles from DrugSeizure; Search and Rescue Boat- Steel Hull Inboard Bank Equipment (ABSOLUTE): CASE MX 210MFWD with Creeper Gear; CASE 450 CT Skid Steer;1985 Ford LT9 Dump Truck; 1986 Pintle HitchLowboy Trailer; 1986 Caterpillar D3B Dozer; 2001Case 850 G Dozer
15488 Hwy. 51 North Grenada, MS 38901
Live/Simulcast Auction. Visit www.taylorauction.com to view catalog
10% BUYERS PREMIUM
TAYLOR AUCTION & REALTY, INC.BENNY & RUTHIE TAYLOR • MS Lic. #176
15488 Hwy. 51 North Grenada, MS 38901 - 1.662.226.2080 OR 1.662.417.0397
Page 88 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Ritchie Bros. Holds Multi-Million Dollar Sale in Atlanta
The ringmen at the ramp make quickwork of selling a package of five
Komatsu WB 140 backhoes.
Thompson Tractor representatives from Montgomeryand Birmingham, Ala., Jason Garrison (L) and his son,Dakota, and Billy Seals were out in full force to monitorthe auction pricing at the Ritchie Bros. Atlanta area sale.
Testing a Komatsu PC138 US excava-tor is Scott McEver, H&R ConstructionParts, Lawrenceville, Ga.
Doing a final Komatsu dozer test beforeheading to the theater area is Tim Thomas,Tractor & Equipment Co., Birmingham, Ala.
Deep in discussion about an Etnyre distributor in the sale lineup areSteve Meissen (L), Reynolds-Warren Equipment Company, Lake City,Ga., and Spencer McCroskey, Sunbelt Asphalt, Atlanta.
Taking a good look at the power plant of a Cat 375L is LukeCopeland, Cope Equipment, Jasper, Ga..
Making thetrek to Atlantaspecifically toinspect andbid on a Cat939C modelcrawlerloader isDuncan Kelly,PlantationFarms,Carthage, N.C.
A hint of things to come. Perry Taggart (L), C.A. MurrenContractors & Engineers, Grayson, Ga., and his RitchieBros. representative Alex Wood stand in front of a nicepackage of C.A. Murren machines, including a Manitowoc555, which will go on the auction block in Newnan, Ga., inNovember.
More than 1,400 bidders participated online and in person atRitchie Bros. Auctioneers’ multi-million dollar unreservedpublic equipment auction in Atlanta on Sept. 20.
Bidders came from 48 countries, including 45 U.S. states. Close to80 percent of the equipment was sold to out-of-state buyers, from asfar away as Australia, Colombia and Indonesia. Online bidders pur-chased close to 38 percent of the equipment sold (by dollar value). In total, more than 1,000 equipment lots were sold in the auction,
including loader backhoes, hydraulic excavators, crawler tractors,multi-terrain loaders, wheel loaders, articulated dump trucks, trucktractors and more.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 89
DELAWARE CONTRACTORS ASSOCIATION EVENTS:WEDNESDAY, OCTOBER 24, 2012 – Delaware Contractors Association’s43rd Annual Meeting. This premier event of the Association’s calendaryear is again being held at the Chase Center on the Riverfront and GuestSpeaker will be Mike Schmidt. Cocktails: 5:00 PM (open bar & horsd’oeuvres); Dinner: 6:00 PM. Reservations are $125.00 per person forthe entire evening. No cancellations will be accepted after 12:00 Noon onWednesday, October 17, 2012. Michael Jack Schmidt is a Hall of Famethird baseman, and is widely considered as one of the greatest at thatposition in the history of Major League Baseball. He played his entirecareer for the Philadelphia Phillies and was the National League MVP in1980, 1981 and 1986. If you are interested in becoming a sponsor ofthis event which entitles you to attend a private cocktail reception withMike, and to register for this event, please contact Marla DiSalvo atDelaware Contractors Association, P. O. Box 6520, Wilmington, DE.Telephone: 302/994-7442, Fax: 302/994-8185, or Email Marla atmdisalvo@e-dca.org.
Minnesota Nursery & Landscape Association (MNLA) – SuccessfulBusiness Grow Here!2012 EVENTS CALENDAR:Wednesday, October 3rd - ISA CERTIFIED ARBORIST, UTILITY SPECIALIST,and MUNICIPAL SPECIALIST EXAM (12:00 PM EST – 5:00 PM EST)Wednesday, October 10th - OPEN HOUSE DAYS AT THE MINNESOTA LAND-SCAPE ARBORETUM GRASS COLLECTION (1:00 PM CST – 6:00 PM CST)October 24th thru October 26th – GIE & EXPO 2012October 24th thru October 26th – 2012 HARDSCAPE NORTH AMERICANovember 2th thru November 6th – 2012 IRRIGATION SHOW & EDUCATION CONFERENCENovember 8th thru November 10th – TCI EXPO 2012 in BALTIMORENovember 16th – 9:00 AM CST – 3:30 PM CST –PESTICIDE RECERTIFICA-TIONJanuary 8, 2013 – 8:00 AM CST – 5:00 PM CST – SUPER TUESDAY:PERMEABLE PAVER SYSTEMS CERTIFICATE COURSEJanuary 8, 2013 – 8:00 AM CST – 5:00 PM CST – SUPER TUESDAY:LANDSCAPE IRRIGATION TROUBLESHOOTING (PLT RELICENSURE)***Please contact MNLA at mnla@mnla.biz or call toll free: 888-886-6652 for more information.
AGC of AMERICA is pleased to offer a wide variety of meetings, events andseminars for construction professionals that can help you improve everyaspect of your business. AGC of MINNESOTA
AGC of MINNESOTA525 Park Street, #110, St. Paul, MN 55103-2186Telephone: 651/632-8929 or 800/552-7670 Fax: 651/632-8929
Email: info@agcmn.org Website: www.agcmn.org
PLAN TO ATTEND: UNIVERSITY OF MINNESOTA, 2012 CONSTRUCTIONEXPOThursday – October 4, 2012, 9:00 AM to 3:00 PM, University of Minnesota,Coffman Memorial Union, Great hall, 300 Washington Avenue S.E.,Minneapolis, MN 55455-0110Exhibit Booths . Networking . Awards Incentive & Recognition (AIR)Luncheon. For more information or to register visit: bced.umn.edu. Or, youmay call Denise Woods, CMP, AGC of MN direct at 651/796-2186 or tollfree: 800/552-7670. Email: info@agcmn.org. Website:www.agcmn.org.
October 16th – FALL MEMBER MEETING. The fall member meeting will beheld October 16 at the Embassy Suites Minneapolis Airport. The programwill feature Jim Schug of FMI Corporation. Jim will present case studies ofsuccessful contractors and analyze how companies both small and largecan remain successful in the current economy. The results of the 2012 –2013 Construction Industry Assessment Survey will also be released.
Build America Award Application AvailableThe 2013 AGC/Alliant Build America competition is open to general contrac-tors and specialty contractors who are current members of an AGC chapterworking as prime contractors for projects completed between November 1,2011 and November 1, 2012. Member companies can visithttp://awards.agc.org/ to begin a project entry. (Please note that this is anewly developed site and will be continually updated throughout the durationof the awards season. Thank you in advance for your patience and cooper-ation.) The final deadline for all submissions is Friday, November 2, at 5:00pm EST. Winners will be announced at AGC’s 94th Annual Convention inPalm Springs, California next March.
*** For more information on the above AGC of Minnesota events, youmay contact Denise Woods,CMP; Director, Communications & Events,Associates General Contractors of Minnesota, 525 Park Street, #110, St.Paul, MN 55103 DIRECT: 651/796-2186; CELL: 612/201-5501; FAX:651/632-8928; TOLL FREE: 800/552-7670 and/or www.agcmn.org.
Thursday, October 4, 2012 – Bridge Project. Mississippi River BridgeProject located at DoubleTree Hotel St. Louis at Westport, 1973 Craigshire,St. Louis, MO 63146. You will want to hear Tom Tavernaro, Project Engineer for the Massman,Traylor, Alberici joint venture provide an overview of the construction workof the Main Span portion of the bridge project. Tom will review the con-struction activities which took place in 2010 and 2011 and discuss theupcoming construction activities this year.Cost: $55.00; Cocktails: 5:30 PM; Dinner: 6:30 PM; Presentation: 7:30PMThe dinner entrée will be grilled chicken breast. A two hour bar is includedin the cost of the dinner. If you have special dietary needs, please advise.Any reservation not canceled prior to Monday, October 1, 2012 at 5:00PM will be billed. Friday, October 19, 2012 – Tournament. Fall Sporting Clays Tournament
at St. Louis Skeet and Trap Club. For Early Bird Sponsorship Specials, signup to be a sponsor by Friday, September 28th, 2012 to get the early birdspecial. This event raises money for the AGC of St. Louis’ Political ActionCommittee, which in turn enables the AGC to strengthen the legislativevoice of the industry. AGC ST. LOUIS – if you have any questions regarding the above AGCevents, you may call Nancy Valentine at the AGC office at 314/480-3173 or email: nvalentine@agcstl.org. Completed registration formsand/or information pertinent to the above events, you may contactDonna Pigg at the AGC of St. Louis office at 314/781-2874.
Georgia Utility Contractors Association, Inc.2012 3rd Quarter Safety Training ScheduleTopics Include: . Competent Person Excavation. Confined Space Entry Program. Damage Prevention/GUFPA Law/PSC. ISEE Blasting Certification. Temporary Utility Workzone Traffic Control. NPDES Level 1A Course and Exam*. NPDES Level 1A Recertification Course*. NPDES Level 1B Course and Exam*. GDOT Approved Flagging Program. GDOT Approved Flagging Instructor Program
*No Checks accepted less than 5 days prior to class date payment reservesthe seat for class – we do not save seats. For more information on the aboveclasses which include dates/locations/costs, please contact ScottBrumbelow, Assistant Executive Director, GUCA, 404/362-9995.
GUCA 804 Main Street, Suite C, Forest Park, GA 30297404/362-9995, 877/SAF-GUCA, Fax: 404/362-9211www.guca.com
HOFFMAN EQUIPMENT, Piscataway, NJ – NCCCO Class Schedule – NCCCO Mobile Crane Certification Dates AvailableWritten Exam Prep (must pre-register August 20 - 24At least 2 weeks prior to class) October 15 – 19Mobile Crane Practical Exam Practice Call To ScheduleMust ScheduleNCCCO Mobile Crane Certification Call To SchedulePractical Exam – Must ScheduleFor More Information or to Register, Call Nancy DeCarr800-4-HOFFMANwww.hoffmanequip.comNew Jersey Corporate HeadquartersHoffman Equipment300 South Randolphville Road • Piscataway, NJ 08854
2012 FLORIDA Contractor Associations Meetings Postings:
New Installations: Wednesday, October 10th and Tuesday, December 4th
NASTT’s mission is to advance trenchless technology and to promote its ben-efits for the public and the environment by increasing awareness and knowl-edge through information dissemination; research and development; educa-tion and training; and partnerships with organizations and agencies interest-ed in trenchless technology and its benefits. NASTT provides a representativevoice for all sectors of the trenchless technology industry. For more infor-mation about NASTT and the variety of training opportunities provided, pleasevisit www.nastt.org or contact Michelle Hill, Communications & TrainingManager at 440/638-4676 or mhill@nastt.org.
MNSW – ROAD – INST – SCHEDROAD INSTITUTE 2012 – 2013 Schedule Announced!!!Road Institute R will soon begin its 48th year as the asphalt paving industry’spremier training school, providing practical instruction for industry profes-sionals. Volvo Construction Equipment has announced the 2012 – 2013 schedulefor the Road Institute. The course curriculum offers two- to five-day sessionsthat begin in October and continue through May 2013, with classes held attwo training facilities in North America – one in Chambersburg, PA and theother in Phoenix, AZ. “The Volvo commitment to training includes offering thisprogram as a service to the industry and providing others the opportunity tolearn best practices in a controlled environment with a focus of instructionand training dedicated to asphalt paving,” said Wade Turlington, Director ofProduct and Sales Education. “The Road Institute is dedicated to providingquality instruction to industry professionals, even if they don’t own or oper-ate Volvo equipment.” 2012 – 2013 Road Institute Course SCHEDULE includes topics such as:. Automatic Grade and Slope Systems. Large Asphalt Compactor Mechanics (Step 1). Large Asphalt Compactor Mechanics (Step 2). MT2000 Hydraulic and Electrical Systems (Step 1). MT2000 Hydraulic and Electrical Systems (Step 2). MW500 Hydraulic and Electrical Systems (Step 1). Paver and Compactor Operation and Maintenance. Paver and Compactor Operation and Maintenance, warm-mix asphalt(WMA). Paver Hydraulic and Electrical Systems – PF6000 – Series Pavers (Step1). Paver Hydraulic and Electrical Systems – PF6000 – Series Pavers (Step2). Paver Hydraulic and Electrical Systems – Blaw-Knox R Pavers (Step 1). Paver Screed Operation and Adjustment. Paving and Compaction Application Seminar. Small Asphalt Compactor Mechanics (Steps 1 and 2). Soil Compaction Application Seminar. Soil Compactor Mechanics (Step 1). Soil Compactor Mechanics (Step 2)Class size is limited for ideal instructor-to-student ratios and team learning.Tuition is $750 (USD) per student per three to five day course or $500 (USD)per student per two day seminar. For more information on the Road Instituteor to register for classes, visit roadinstitute.com or call 866/497-4501 oremail: roadinstitute@volvo.com.
BusinessCalendar
Page 90 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Volvo CE Wins AEM Gold for ‘I Make America’ CampaignAs the London 2012 Olympic games
came to a close, America was celebratingafter finishing top of the medal table — win-ning more gold medals than any other coun-try in the world. Volvo ConstructionEquipment (Volvo CE) joined America’sgold-winning streak — awarded “gold sta-tus” by The Association of EquipmentManufacturers (AEM) for its participation inthe I Make America campaign. The cam-paign hopes to dramatically improveAmerican manufacturing policies to createmore jobs in the United States and keep itseconomy competitive with other countries. The Association of Equipment
Manufacturers (AEM), with more than 850member companies, announced that VolvoCE joins the elite ranks of the I MakeAmerica campaign’s gold-level companysupporters. Volvo CE has shown continuousyear-on-year dedication to this cause,expanding its sites, factories and work force
in order to grow the industry. Last year,Volvo CE achieved silver status for its par-ticipation in the grassroots campaign, firstlaunched in September 2010. Since the campaign’s inception, Volvo
CE has been heavily involved as a dedicat-ed partner contributing to its overall suc-cess. By asking state legislators and mem-bers of Congress to pass new job develop-ment policies through ambitious construc-tion projects and the restoration of theU.S.’s aging infrastructure, the companyhopes it can make a difference. “We commend Volvo CE for achieving
Gold status in the I Make America cam-paign,” said Dennis Slater, president ofAEM. “As a member of AEM, Volvo CEexemplifies the commitment we need fromall manufacturers around the country tosend the message to Congress and the
White House that our economy is in urgentneed of a new manufacturing policy that willgenerate jobs.”
There Is No Stopping Volvo Volvo CE has shown its dedication to the
long-term development of the U.S. construc-tion industry following its $100 millioninvestment in its manufacturing facilities inShippensburg, Pa., which will bring morejobs and local manufacturing of core prod-ucts to one of Volvo CE’s home markets.Volvo CE is creating a modern customer anddemonstration center in Shippensburg, aswell as an Americas Headquarters facility onits current campus, further demonstrating itscommitment to the North American market. “We all want the best for America,” said
Bill Law, Volvo CE vice president of corpo-rate communication for the Americas region. “Initiatives such as I Make America are
excellent ways to focus everyone’s attentionon using the muscle of the constructionindustry to get the giant wheel of the U.S.economy spinning at top speed again.”
I Make America gold-level supporters are an importantgroup of companies. Many of the companies are industryleaders that have reached out to the state or local and federallegislators. The campaign has enlisted the support of morethan 21,000 people nationwide so far, including industryorganizations.AEM membership comprises more than 200 product lines
in the agriculture, construction, forestry, mining and utilitysectors worldwide. Volvo has been involved with the I MakeAmerica campaign from the very beginning and has given IMake America presentations to its employees in their manu-facturing facilities and sales organization. “Our workforce is aware that, through properly thought-
out legislation and well-funded infrastructure development,so many jobs and wealth have been created in recentdecades,” adds Law. “They are keen to support initiativesand legislation that will continue to create jobs.”
Goran Lindgren (L),Volvo CE president of
sales region Americas,and Andy Knight, head of
Volvo CE operations inthe Americas, break
ground on theShippensburg, Pa.,
expansion.
Volvo CE is investing $100 million to grow its manufacturing facilities in North America.
Technicians and engineerswork hard to produceexcellent machinery onsite.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 91
Page 92 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Complete Liquidation
(approx. 120 miles southeast of Baltimore)THURSDAY, OCTOBER 18th at 10AM
Inspection: Day Prior from 9AM - 4PM
Large Late Model CAT & KOMATSU Construction EquipmentB L AW K N OX
MACK MACK Tri-Axle Dump Trucks - As New
TERMS:
MYRON BOWLING
To bid online,register at:www.lyonauctionlive.com (315) 633-2944 www.lyonauction.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 93
N.C. Contractors Enjoy DualCustomer Appreciation Day
Blaine Reese (L) and Joey Ross, both ofJ&J Logging, Henderson, N.C., look for-ward to the annual event.
(L-R): Jimmy Cole and George Marsh, both of Gelder & Associates, Raleigh, N.C.,thank Dan Moore for his hospitality.
Mark Barnes, Benchmark Tool &Supply, sets up the Sokkia RoboticTotal Station. The machine is used forsurveying and setting the stakes.
Tom Sullivan, Sullivan Eastern, Durham,N.C., tested this John Deere 672GP motor-grader.
SKEET from page 62
www.lyonauction.com corporate offices: Bridgeport, NYPhone: (315) 633-2944 • Fax: (315) 633-5635
www.lyonauctionlive.com
Sales Managers & Auctioneers, Inc.
WED., OCT. 24 @ 9:00 AM
ALEX
LYON& SON
NOTE: Selling will be a large amount of rental fleet equipment from several national
rental fleets.
HILITES: 5 ARTICULATED HAUL TRUCKS: 2007-2006 Volvo A40D, 2005 Volvo A35D, (2) 2007 Terex TA30, 17
HYDRAULIC EXCAVATORS: Unused Cat 320EL, 2003 Cat 305SR, 2006 Volvo EC700B, 2007-2005 EC240CL, Volvo
ECR88, (2) 2006 Kobelco Sk350LC-6, 2005 - 2004 Kobelco SK250LC, (2) 2006-(2) 2005 Kobelco SK135SR, Kobelco
SK115DZ-IV, IHI 35N, (4) 2005 IHI 28N-2, IR ZX75, 2 LONG REACH EXCAVATORS: Unused 2012 Doosan
DX225LC, 2005 Cat 322CLR, 2 MOTOR GRADERS: JD 772, JD 770A, 9 RUBBER TIRED LOADERS: 2009-2008
Volvo L110F, (2) 2005 Case 621D, 2005 Komatsu WA250, 2008 Cat 962H (grapple), Cat 938G (log fork), Cat 920, JD
544J, TOOL CARRIER: Cat IT38G, 8 CRAWLER TRACTORS: Cat D8R, Cat D8N, 2003 Cat D6NLGP, 2006-(2)
2005 JD 650J, 2006-2005 JD 450JLGP, 10 TRACTOR LOADER BACKHOES: 2011 Case 590 Super N (4x4), 2006-
(3) 2005 Case 580M (4x4), 2007-2006 JCB 214 (4x4), 2005 NH LB75B (4x4), JD 310, 2007 Allmand TLB425,
ASPHALT PAVERS: 2008 IR PF6170, 5 ASPHALT ROLLERS: IR SD122DX, 2003 IR DD130, (2) Bomag BW75AD,
2004 Multiquip MRH800DS, 14 VIBRATORY ROLLERS: (2) 2007 Cat CP563E, (3) 2007-2006 Dynapac CA250D
(cab), 2006 IR SD100D, (3) 2004 IR SD70D, (2) 2004 IR SD45D, 2006 Hamm 3205, 2006 Bomag BW211-3, 19 RUB-
BER TRACKED SKID STEERS: 2007-2006 Bobcat T300, (2) 2007- (9) 2006 Bobcat T190, 2005 JD CT322, (2) 2006
Takeuchi TL130, 2009-(2) 2007 Komatsu CK35, 10 SKID STEERS: 2008 Case 465, 2006 Bobcat S220, (4) 2006 Bobcat
S175, (3) 2005 JD 317, Gehl 4835, 2 TRENCHERS: 2004 Ditch Witch 1330, Ditch Witch 1030H, FELLER BUNCH-
ERS: Hydro-Ax 321, 4 TELESCOPIC FORKLIFTS: 2005-2004 JLG G9-43A, 2005 IR VR843C, 2006 JCB 508C, 4
PIGGY BACK FORKLIFTS: (4) Moffett M5000, 4 BOOM LIFTS: 2004 JLG 800S (4x4), (2) 2004 Genie Z45/25RT,
2005 Snorkel UNO41G, 15 SCISSOR LIFTS: (6) 2003 Genie AWP-30S, 2005 Genie GS2632, (4) 2003 Genie GS1930,
(2) Genie GS1930, Skyjack 4626, 7 AIR COMPRESSORS: (2) 2006 Sullair 185DPQJD, Sullair 185DPQJD, 2005-2003
IR P185WJD, 2004 Airman PDS185S, Airman PDS185S, 5 GENERATORS: (2) Demo Cat 500kw, 2006 Multiquip
DCA70USIC, (2) 2006 Multiquip DCA25USI, 15 WELDERS: (2) 2007 –(2) 2006-(3) 2005 Miller Big Blue 400D, 2006
Miller BB400D, 2006 Miller Big 40, 2008 Multiquip DLW40ES, (2) 2006-2004 Multiquip BLW400SS, 2006 Lincoln
Vantage 300, 6 LIGHT PLANTS: (2) 2006 Magnum Pro MLT3060, (3) 2004 Magnum MLT3060, Magnum MLT3060, 2
WATER PUMPS: 2006-2003 Pioneer PP66S12L, 4 SWEEPERS: 2010 -2009 Broce KR350 (cab), (2) 2004 Terramite
TSS38, DIGGER DERRICK TRUCKS: 1982 Int’l. S1800 AWD (s/a), DUMP TRUCKS: 1996 Mack RD690S (tri.),
BOOM TRUCKS: 1999 Int’l. 4700 15T (s/a), FLATBED TRUCK: 2005 Freightliner Cab Over (tri.), 3 TRUCK
TRACTORS: 2005 Peterbilt 378 (t/a), 2005 Kenworth 900 (t/a), 2004 Volvo 4NL430 (t/a), 2 WATER TANKERS: Cat
769C, Cat 613C, SERVICE TRUCK: 2006 Ford F350XL 9 PICKUPS: 2005 Ford F250 (4x4), 2005 Ford F250, 2000
Ford F150XLT, 2006-2003-2002-2001 Ford F150, 2008 Dodge Ram 1500, 2003 Chevy Silverado 1500 Z71, SUPPORT
EQUIPMENT: Folding Ramps, Huskie Hammer Drill, New Impact Wrenches, New Abrasive Blades, New Submersible
Pumps, New Platform Scales, New Stiff Neck Pintle Hitches, New Air Spray Gun Kits, New Diamond Blades, New
Concrete Vibrators, New Plate Compactors, New Demo/ Cutoff Saws.
Address: 12601 State Rd. 545 North (Avalon Rd.), Winter Garden, FL 34787.
DIRECTIONS: From Tampa: I-4E to Rte. 27N for 6.5 miles to Rt. 192E for 1 mile. Left on Avalon Rd. for 3 miles to
sale site on left. From Orlando:I-4W to Rt. 192W for 5.5 miles, turn right on Avalon Rd. to sale site.
FLORIDA AUCTIONEER LICENSE: #AU 0001548, FLORIDA LICENSE: #AB-1091.
SALE SITE PHONE: (407) 239-2700, (770) 537-7386,
FAX: (407) 239-0068.
LARGE AUCTION OF RENTAL RETURNS: CONSTRUCTION EQUIPMENT,
SUPPORT, ATTACHMENTS,
AERIALS & FORKLIFTS.
NEFF RENTALS
HERTZ EQUIPMENT RENTALS
KISSIMMEE,(WINTER GARDEN)
FLORIDA
AUCTION
RENTAL RETURN AUCTION
Page 94 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
ADVANCE TIRE ..........................................................................50ALEX LYON & SON INC
KISSIMMEE FL....................................................................93ANACONDA CONVEYORS USA INC ........................................25ASC CONSTRUCTION EQUIPMENT USA ............................3,38BAIR PRODUCTS INC ................................................................56BARGAINS ..................................................................................80BENCH MARK TOOL & SUPPLY ..................................................7BID SPOTTER ............................................................................89BOBCAT COMPANY....................................................................48BOMAG........................................................................................73BROOKS SALES INC....................................................................6CASE CONSTRUCTION ........................................................44,45CAT AUCTION SERVICES ..........................................................85CEG SCALE MODELS ................................................................40CHICAGO PNEUMATIC ..............................................................24CLASSIFIEDS..............................................................................80CLEVELAND BROTHERS EQUIPMENT CO ........................17-19COMPANY WRENCH ..................................................................27CONSTRUCTION EQUIPMENT GUIDE
WANTED ............................................................................81CRAWLER LOADER PROMO ............................................42AUCTION RESULTS ..........................................................91ONE BUY NATIONAL COVERAGE ....................................36
DOMINION EQUIPMENT PARTS................................................77DYNAPAC ....................................................................................64FLANGE LOCK ............................................................................30FLUID CONTROL SERVICES ....................................................14G S EQUIPMENT ..........................................................................2GEHL............................................................................................56GOMACO CORP ........................................................................65H & L TOOTH CO ........................................................................29HALE TRAILER BRAKE & WHEEL ............................................21HILLS MACHINERY COMPANY..................................................96HITACHI CONSTRUCTION MACHINERY..............................78,79HYDREMA U S INC ....................................................................15HYUNDAI CONSTRUCTION EQUIPMENT ................................41IRON PLANET ............................................................................83JCB INC ..................................................................................52,53JFW EQUIPMENT INC ................................................................66JOHN DEERE ..............................................................................57JOHN DEERE SKID STEER ......................................................95K I T EQUIPMENT ......................................................................22
KAWASAKI ..................................................................................51KOBELCO ..............................................................................46,47KOMATSU AMERICA CORP ............................................37,54,55KUBOTA SVL ..........................................................................58,59LEEBOY..................................................................................68,69LIEBHERR CONSTRUCTION EQUIPMENT ................................9LIUGONG ....................................................................................33M D MOODY & SONS INC..........................................................13MACKINNON EQUIPMENT & SERVICE ....................................10MAULDIN PAVING PRODUCTS..................................................75MAY HEAVY EQUIPMENT ..........................................................22MINNICH MANUFACTURING ....................................................66MOTLEY'S AUCTION & REALTY GROUP
RICHMOND VA ..................................................................87MYRON BOWLING AUCTIONEERS
EDEN MD ............................................................................92NPK CONSTRUCTION EQUIPMENT INC ..................................35PINNACLE CENTRAL CO ..........................................................22PROFESSIONAL SHORING & SUPPLY ......................................6RING POWER CRANE................................................................10RING POWER RENTAL ................................................................5ROAD BUILDERS MACHINERY ................................................24ROSCO MFG CO ........................................................................67RUBBERTRAX INC......................................................................50SAKAI AMERICA INC ..................................................................71SANY AMERICA INC ..................................................................27SITECH MID-ATLANTIC ..............................................................23SNEAD AG SUPPLY & SERVICES ............................................11SOLESBEES EQUIP & ATTACHMENTS ....................................14STONE CONSTRUCTION EQUIPMENT ....................................70TAKEUCHI ..................................................................................61TAYLOR AUCTION & REALTY
GRENADA MS ....................................................................87TEREX COMPACT ......................................................................70TOKU AMERICA INC ..................................................................20TRENCH SHORING SERVICES ................................................31VOLVO COMPACTION ................................................................72VOLVO CONSTRUCTION EQUIPMENT ....................................39WHITE OAK EQUIPMENT INC ....................................................6WILSON FINLEY ........................................................................76WIRTGEN AMERICA ..................................................................74YANMAR AMERICA ....................................................................60
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 95
You asked. We delivered. Our D-Series SkidSteers are loaded with customer-recommendedenhancements, like larger operator stations,quiet pressurized cabs with best-in-class visibility, and curved-glass swing-out doors. D-Series innovations include an exclusive cooling system with available hydraulically driven variable-speed fan that reverses to clear core-clogging buildup. Plus options suchas electrohydraulic joysticks, variable boomand bucket speed settings, and more than 100 attachments to let you take on more tasks.
Packed full of best-in-class productivity anduptime-enhancing features, the D-Series aredestined to become owner and operatorfavorites. Ask for a demo today.
The Difference is in the D-tails.
www.johndeere.com
KS1CUFFOO34N-00268028
Ashland, VA 23005804/358-6776
Burkeville, VA 23922434/767-5578Fishersville, VA540/337-3057Richland, VA276/596-9440
Asheboro, NC 27203336/625-2212Charlotte, NC704/597-0211 Greensboro, NC336/668-2762
Matthews, NC 28104704/821-7399Mt. Airy, NC336/352-2240Mt. Gilead, NC910/439-5653
Salisbury, NC 28144704/636-2671
Wilkesboro, NC 28697336/973-8201800/422-4193
Rock Hill, SC 29730803/325-1555866/277-8119
1206 Blaylock St, P.O. Box 3329Albany, GA 31706229/888-1212
Fax: 229/435-3612Cuthbert GA229/732-2631Dothan, AL334/794-8691Troy, AL
334/566-4181Perry, FL850/584-9200Tallahassee, FL850/575-5600
West Columbia, SC 29169803/794-9340
Aynor, SC 29511843/358-5688
Atlanta, GA 30336404/691-9445
Braselton, GA 30517770/965-1889
Adairsville, GA 30103770/773-9857Savannah, GA912/964-7370Brunswick, GA912/264-6161Ladson, SC843/572-0400Walterboro, SC843/539-1420
R.W. MOORE
EQUIPMENT CO.www.rwmoore.comAhoskie, NC252/332-5550New Bern, NC252/638-5838Greenville, NC252/758-4403Castle Hayne, NC910/675-9211
COASTAL
EQUIPMENT CORP.www.coastalequipment.net504 South Military HwyVirginia Beach, VA 23464
757/424-1900Yorktown, VA 23692757/898-1900
FLINT EQUIPMENT COMPANYJAMES RIVER EQUIPMENT
CONTACT YOUR LOCAL JOHN DEERE SKID STEER LOADER DEALER
Page 96 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
North Carolina
South Carolina
Tier 3
Case SR220 Skid Steer Loader
Call Today!
Case SR250 Skid Steer Loader Case 586G Rough Terrain Forklift
Case TV380 Compact Track Loader Case TR320 Compact Track Loader Case TR270 Compact Track Loader
ier 3T
ier 3
ier T
3
No reasonable offer will be turned downLow rate financing and no down payment
y! They will go fHurr
No reasonable offer will be turned downLow rate financing and no down payment
asty! They will go f
ned
wn p
#NBM441014 Case TV380 Compact T
rack Loader act T Track Loader
#NCM440404 Case TR320 Compact T
#NBM438910, #NBM439021 Case TR270 Compact Track Loader t T Track Loader
#NBM438910, #NBM439021 Case TR270 Compact T
#NBM438910, #NBM439021 rack Loader T Track Loader
#NBM432151, #NBM432155 Case SR220 Skid Steer Loader
#NBM432151, #NBM432155 Case SR220 Skid Steer Loader
#NBM434360 Case SR250 Skid Steer Loader
#NBC548477 Case 586G Rough TCase SR250 Skid Steer Loader
#NBC548477 erra Case 586G Rough T Terrain Forklift
errain Forklift
#NBM432151, #NBM432155
oCall T Today!.hillsmachinerwww
Fax:Phone:877-549-3232
eenville, NC 27834Gr315 Easy Str
eenvilleGrNorth Carolina
#NBM432151, #NBM432155
oday!.comy.hillsmachiner
Fax: Phone:888-830-5939Columbia, SC 292091014 Atlas WColumbiaSouth Carolina
252-758-4163Fax:252-752-7145Phone:
877-549-3232eenville, NC 27834
eet315 Easy Streenville
North Carolina
#NBM434360
843-225-9378Fax:Phone:866-830-7577North Charleston, SC 294187168B CrCharleston
803-233-4482803-658-0200Phone:
888-830-5939Columbia, SC 29209
ay 1014 Atlas WColumbiaSouth Carolina
#NBC548477
843-225-9378843-225-9377
866-830-7577North Charleston, SC 29418
oss County Road 7168B CrCharleston
#NBC548477
ovaledit appr roval*Subject to cr redit appr