Post on 16-Jan-2016
description
transcript
"Enduring Performance, Lasting Beauty"
2"Enduring Performance, Lasting Beauty"
2
Thank you for giving us the opportunity to review
the many specialty millwork products we produce at
Southern Crafted Millwork. We are a locally owned
family business that has been in operation in the
Carolina’s for over 35 years. As you review our catalog,
you will see the pride we take in “Made in the USA” by
the craftsmanship and intelligent design that goes into
everything we produce.
Southern Crafted Millwork recognizes the importance of
being environmentally responsible. We recycle virtually
all of our wood and paper items. We make every effort to
minimize the negative impact our products may cause
by using lumber from sustainable forests.
SHUTTERS .................................................................................. 3 - 14
RAFTER TAILS, BRACKETS, CORBELS, OUT-LOOKERS AND BRACES ...................................... 15 - 22
MANTELS ................................................................................. 23 - 29
COLUMNS AND CAPITALS ........................................... 30 - 37
IRONING CENTER ............................................................... 38 - 39
SETTEE BENCHES ............................................................... 40 - 42
ENGRAVING ........................................................................... 43 - 47
3
Southern Crafted Millwork offers a complete line of
exterior shutters in both standard and custom
sizes. Our shutters are available in Cypress and
exterior grade high performance wood composite
Additional wood species are available upon request.
Southern Crafted Millwork’s louvered shutters are
assembled using traditional mortise and tenon joinery.
This application ensures greater stability and lasting
performance. Exterior shutters are available in louver,
raised panel, flat panel, board and batten and “V” groove.
Our state of the art millwork facility offers a limitless
combination of custom features not offered in the
millwork industry. In addition to our standard product
offering, we specialize in replicating original custom
shutter designs for historic accuracy.
4"Enduring Performance, Lasting Beauty"
4
5
EXTERIOR LOUVER SHUTTER OFFERING
Cypress Flush Stiles and Rails Specifications: STILES: 2 ¾” x 1 ¼” RAILS: 2 ¾” x 1 ¼” (top and bottom rails are the same dimension for reverse application. SLATS: 1 7/8” x 3/8”
1 1/4” EXTERIOR FIXED LOUVER SHUTTERSBelow we have included some standard designs as
well as suggested options for our standard flush stile & rail louvered shutters with 1 7/8” x 3/8” louver slats.
For any other designs or options, please call for a quote.
2 Sections withRail Placement
CombinationTrue Louver overRaised Panel with 2 Equal Sections
2 Equal Sections
2 Equal Sections with Eyebrow
Arch Top
2 Equal Sections with False Control
Rods andMouse Holes
2 Equal Sections with Modified
Side Stiles and Topand Bottom Rails
Rail Placement with 3 Sections and Small Transom Top
2 Equal Sections with Rake Bottom
2 Equal Sections with
Rake Top
2 Equal Sections with Quarter Round
Arch Top
3 Equal Sections
2 Sections withRail Placement
CombinationTrue Louver overRaised Panel with 2 Equal Sections
2 Equal Sections
2 Equal Sections with Eyebrow
Arch Top
2 Equal Sections with False Control
Rods andMouse Holes
2 Equal Sections with Modified
Side Stiles and Topand Bottom Rails
Rail Placement with 3 Sections and Small Transom Top
2 Equal Sections with Rake Bottom
2 Equal Sections with
Rake Top
2 Equal Sections with Quarter Round
Arch Top
3 Equal Sections
2 Sections withRail Placement
CombinationTrue Louver overRaised Panel with 2 Equal Sections
2 Equal Sections
2 Equal Sections with Eyebrow
Arch Top
2 Equal Sections with False Control
Rods andMouse Holes
2 Equal Sections with Modified
Side Stiles and Topand Bottom Rails
Rail Placement with 3 Sections and Small Transom Top
2 Equal Sections with Rake Bottom
2 Equal Sections with
Rake Top
2 Equal Sections with Quarter Round
Arch Top
3 Equal Sections
2 Sections withRail Placement
CombinationTrue Louver overRaised Panel with 2 Equal Sections
2 Equal Sections
2 Equal Sections with Eyebrow
Arch Top
2 Equal Sections with False Control
Rods andMouse Holes
2 Equal Sections with Modified
Side Stiles and Topand Bottom Rails
Rail Placement with 3 Sections and Small Transom Top
2 Equal Sections with Rake Bottom
2 Equal Sections with
Rake Top
2 Equal Sections with Quarter Round
Arch Top
3 Equal Sections
Southern Crafted Millwork
exterior louver shutters follow
the same architectural principles that
were established many years ago.
We hand select our lumber to assure
the best possible performance
available in the industry. Our state-
of-the-art machinery enables us to
provide an almost limitless combina-
tion of custom architectural millwork.
Our experienced staff produces a
finished product that will meet or
exceed your expectations.
As you review this catalog, you will
find examples that illustrate our ability
to replicate historic millwork practices.
We are confident that you will appreci-
ate the quality and workmanship that
go into every shutter we manufacture.
EX
TE
RIO
R L
OU
VE
R S
HU
TTE
RS
6"Enduring Performance, Lasting Beauty"
7
Southern Crafted Millwork exteri-
or paneled shutters are available
in Cypress, which provides the best
performance against decay, warp and
stability. Our raised paneled shutters
are manufactured with a single sided
heavy raised panel or available in a flat
panel configuration.
Additional wood species and custom
designs are available upon request.
CYPRESS PANELED SHUTTERS
Standard Flush Stiles and Rails with Variable Panels Specifications: STILES: 3” x 1 ¼” RAILS: 3” x 1 ¼” PANEL THICKNESS: ¾”
AVAILABLE OPTIONS:
• “V” groove panels • Decorative cutouts and carvings
1 1/4” EXTERIOR PANELED SHUTTERSBelow we have included some standard
designs as well as suggested options for our standard flush stile & rail paneled shutters.
For any other designs or options, please call for a quote.
StandardRaised Panel:
2 Sections withRail Placement
StandardRaised Panel:
2 Equal Sections
Flat Panel with2 Equal Sections
StandardRaised Panel:
Rail Placement with 3 Equal Sections
StandardRaised Panel:
2 Equal Sections and Modified Wide Stiles
StandardRaised Panel:
Rail Placement with Small Top and
Bottom Sections
V-GrooveRaised Panel:
Rail Placement with 2 Equal Sections
StandardRaised Panel:
2 Equal Sections and Quarter Round
Arch Top
CombinationTrue Louver
over V-GrooveFlat Panel with
2 Equal Sections
Standard Raised Panel with 2 Equal
Sections and Decorative Trim
V-GrooveFlat Panel:
Rail Placement with Small
Center Section
StandardRaised Panel:
2 Sections withRail Placement
StandardRaised Panel:
2 Equal Sections
Flat Panel with2 Equal Sections
StandardRaised Panel:
Rail Placement with 3 Equal Sections
StandardRaised Panel:
2 Equal Sections and Modified Wide Stiles
StandardRaised Panel:
Rail Placement with Small Top and
Bottom Sections
V-GrooveRaised Panel:
Rail Placement with 2 Equal Sections
StandardRaised Panel:
2 Equal Sections and Quarter Round
Arch Top
CombinationTrue Louver
over V-GrooveFlat Panel with
2 Equal Sections
Standard Raised Panel with 2 Equal
Sections and Decorative Trim
V-GrooveFlat Panel:
Rail Placement with Small
Center Section
StandardRaised Panel:
2 Sections withRail Placement
StandardRaised Panel:
2 Equal Sections
Flat Panel with2 Equal Sections
StandardRaised Panel:
Rail Placement with 3 Equal Sections
StandardRaised Panel:
2 Equal Sections and Modified Wide Stiles
StandardRaised Panel:
Rail Placement with Small Top and
Bottom Sections
V-GrooveRaised Panel:
Rail Placement with 2 Equal Sections
StandardRaised Panel:
2 Equal Sections and Quarter Round
Arch Top
CombinationTrue Louver
over V-GrooveFlat Panel with
2 Equal Sections
Standard Raised Panel with 2 Equal
Sections and Decorative Trim
V-GrooveFlat Panel:
Rail Placement with Small
Center Section
StandardRaised Panel:
2 Sections withRail Placement
StandardRaised Panel:
2 Equal Sections
Flat Panel with2 Equal Sections
StandardRaised Panel:
Rail Placement with 3 Equal Sections
StandardRaised Panel:
2 Equal Sections and Modified Wide Stiles
StandardRaised Panel:
Rail Placement with Small Top and
Bottom Sections
V-GrooveRaised Panel:
Rail Placement with 2 Equal Sections
StandardRaised Panel:
2 Equal Sections and Quarter Round
Arch Top
CombinationTrue Louver
over V-GrooveFlat Panel with
2 Equal Sections
Standard Raised Panel with 2 Equal
Sections and Decorative Trim
V-GrooveFlat Panel:
Rail Placement with Small
Center Section
EX
TE
RIO
R P
AN
ELE
D S
HU
TTE
RS
8"Enduring Performance, Lasting Beauty"
9
Southern Crafted Millwork Wood
Shutters with variable boards &
options are available in wire brushed
Western Red Cedar and smooth finished
Cypress. It has been our experience that
these two wood species are naturally de-
cay resistant and offer excellent stability
when compared to other wood species.
In addition, we also offer this shutter in
an exterior grade composite.
Board and Batten shutters can vary in
board width and the number of vertical
boards specified.
Our standard Cypress wood offering
utilizes a 1¼” board for both the
horizontal and vertical members.
Shutters made with exterior grade
composite, utilize 1” material. Boards
are attached with stainless steel screws
from the back side of the verticle boards.
We recommend that Board and Batten
shutters over 42” in height be
constructed with 3 horizontal boards.
Decorative cutouts and carvings are
available to only your imagination.
Board and Batten shutters can be custom-
ized to meet your expectations. You can
select the number of boards or battens to a
special width, gaps, bevels and cutouts.
BOARD & BATTEN SHUTTERSBelow we have included some custom designs
as well as a few suggested cutout options. Additional wood species are available upon request
Board & BattenShutter with
3 Vertical Boardsand 2 Horizontal
Battens
4 Vertical Boardsand 2 Horizontal
Battens withDecorative Cutout
3 Vertical Boardsand 2 Horizontal
Battens with Narrowed Gap
Between Boards
3 Vertical Boardsand 2 Horizontal
Battens with EyebrowArch Top
Board and Batten Shutter with
5 Vertical Boardsand 2 Horizontal
Battens
3 Vertical Boardsand 2 Horizontal
Battens with Quarter Round
Arch Top
5 Vertical Boardsand 2 Horizontal
Battens withSingle Z-Bar
4 Vertical Boardswith 2 Horizontal
Battens
4 Vertical Boardsand 3 Horizontal
Battens withWider Gap
Between Boards
2 Vertical Boardswith 2 Horizontal
Battens
2 Vertical Boardswith 2 Horizontal
Battens withDecorative Cutout
Board and Batten Shutter with
4 Vertical Boardswith 3 Horizontal
Battens
Board & BattenShutter with
3 Vertical Boardsand 2 Horizontal
Battens
4 Vertical Boardsand 2 Horizontal
Battens withDecorative Cutout
3 Vertical Boardsand 2 Horizontal
Battens with Narrowed Gap
Between Boards
3 Vertical Boardsand 2 Horizontal
Battens with EyebrowArch Top
Board and Batten Shutter with
5 Vertical Boardsand 2 Horizontal
Battens
3 Vertical Boardsand 2 Horizontal
Battens with Quarter Round
Arch Top
5 Vertical Boardsand 2 Horizontal
Battens withSingle Z-Bar
4 Vertical Boardswith 2 Horizontal
Battens
4 Vertical Boardsand 3 Horizontal
Battens withWider Gap
Between Boards
2 Vertical Boardswith 2 Horizontal
Battens
2 Vertical Boardswith 2 Horizontal
Battens withDecorative Cutout
Board and Batten Shutter with
4 Vertical Boardswith 3 Horizontal
Battens
Board & BattenShutter with
3 Vertical Boardsand 2 Horizontal
Battens
4 Vertical Boardsand 2 Horizontal
Battens withDecorative Cutout
3 Vertical Boardsand 2 Horizontal
Battens with Narrowed Gap
Between Boards
3 Vertical Boardsand 2 Horizontal
Battens with EyebrowArch Top
Board and Batten Shutter with
5 Vertical Boardsand 2 Horizontal
Battens
3 Vertical Boardsand 2 Horizontal
Battens with Quarter Round
Arch Top
5 Vertical Boardsand 2 Horizontal
Battens withSingle Z-Bar
4 Vertical Boardswith 2 Horizontal
Battens
4 Vertical Boardsand 3 Horizontal
Battens withWider Gap
Between Boards
2 Vertical Boardswith 2 Horizontal
Battens
2 Vertical Boardswith 2 Horizontal
Battens withDecorative Cutout
Board and Batten Shutter with
4 Vertical Boardswith 3 Horizontal
Battens
Board & BattenShutter with
3 Vertical Boardsand 2 Horizontal
Battens
4 Vertical Boardsand 2 Horizontal
Battens withDecorative Cutout
3 Vertical Boardsand 2 Horizontal
Battens with Narrowed Gap
Between Boards
3 Vertical Boardsand 2 Horizontal
Battens with EyebrowArch Top
Board and Batten Shutter with
5 Vertical Boardsand 2 Horizontal
Battens
3 Vertical Boardsand 2 Horizontal
Battens with Quarter Round
Arch Top
5 Vertical Boardsand 2 Horizontal
Battens withSingle Z-Bar
4 Vertical Boardswith 2 Horizontal
Battens
4 Vertical Boardsand 3 Horizontal
Battens withWider Gap
Between Boards
2 Vertical Boardswith 2 Horizontal
Battens
2 Vertical Boardswith 2 Horizontal
Battens withDecorative Cutout
Board and Batten Shutter with
4 Vertical Boardswith 3 Horizontal
Battens
EX
TE
RIO
R B
OA
RD
& B
ATTE
N S
HU
TTE
RS
10"Enduring Performance, Lasting Beauty"
11
Southern Crafted Millwork is
proud to announce the addition
of EXTIRA false louver and paneled
shutters to our shutter offering.
Exteria is a panel product that is
designed for exterior applications.
Exteria is a revolutionary treated
exterior MDF composite that is a
superior alternative to wood in
exterior paint grade applications.
This composite shutter is unpainted
and unprimed, ready to finish. Treated
with Zinc Borate for rot and termite
resistance, Exteria composite, unlike
wood, resists checking, splitting and
cracking and is backed by a five year
limited warranty.
EXTERIOR COMPOSITE GRADE FALSE LOUVER SHUTTER
Standard Flush Stiles and Rails Specifications: STILES: 3” x 1” RAILS: Top Rail: 3”/ Mid Rail: 3”/ Bottom Rail: 3”
COMPOSITE FALSE LOUVER SHUTTERSBelow we have included some standard designs as well as suggested options for our flush stile & rail closed louvered slats.
For any other designs or options, please call for a quote.
2 Sections withRail Placement
CombinationTrue Louver overRaised Panel with 2 Equal Sections
2 Equal Sections
2 Equal Sections with Eyebrow
Arch Top
2 Equal Sections with False Control
Rods andMouse Holes
2 Equal Sections with Modified
Side Stiles and Topand Bottom Rails
Rail Placement with 3 Sections and Small Transom Top
2 Equal Sections with Rake Bottom
2 Equal Sections with
Rake Top
2 Equal Sections with Quarter Round
Arch Top
3 Equal Sections
2 Sections withRail Placement
CombinationTrue Louver overRaised Panel with 2 Equal Sections
2 Equal Sections
2 Equal Sections with Eyebrow
Arch Top
2 Equal Sections with False Control
Rods andMouse Holes
2 Equal Sections with Modified
Side Stiles and Topand Bottom Rails
Rail Placement with 3 Sections and Small Transom Top
2 Equal Sections with Rake Bottom
2 Equal Sections with
Rake Top
2 Equal Sections with Quarter Round
Arch Top
3 Equal Sections
2 Sections withRail Placement
CombinationTrue Louver overRaised Panel with 2 Equal Sections
2 Equal Sections
2 Equal Sections with Eyebrow
Arch Top
2 Equal Sections with False Control
Rods andMouse Holes
2 Equal Sections with Modified
Side Stiles and Topand Bottom Rails
Rail Placement with 3 Sections and Small Transom Top
2 Equal Sections with Rake Bottom
2 Equal Sections with
Rake Top
2 Equal Sections with Quarter Round
Arch Top
3 Equal Sections
2 Sections withRail Placement
CombinationTrue Louver overRaised Panel with 2 Equal Sections
2 Equal Sections
2 Equal Sections with Eyebrow
Arch Top
2 Equal Sections with False Control
Rods andMouse Holes
2 Equal Sections with Modified
Side Stiles and Topand Bottom Rails
Rail Placement with 3 Sections and Small Transom Top
2 Equal Sections with Rake Bottom
2 Equal Sections with
Rake Top
2 Equal Sections with Quarter Round
Arch Top
3 Equal Sections
CO
MP
OS
ITE
MD
F L
OU
VE
R S
HU
TTE
RS
12"Enduring Performance, Lasting Beauty"
13
Southern Crafted Millwork’s
Extira composite paneled
shutters offers the same quality and
durability features found in our false
louver shutter offering. Our raised
panel shutters are manufactured with
a single sided heavy raised panel or
available in a flat panel configuration.
EXTERIOR COMPOSITE GRADE PANELED SHUTTER
Standard Flush Stiles and Rails with Variable Panels Specifications: STILES: 3” x 1” RAILS: 3” x 1” PANEL THICKNESS: ¾”
AVAILABLE OPTIONS:
• “V” groove panels • Decorative cutouts and carvings
COMPOSITE PANELED SHUTTERSBelow we have included some standard
designs as well as suggested options for our standard flush stile & rail paneled shutters.
For any other designs or options, please call for a quote.
StandardRaised Panel:
2 Sections withRail Placement
StandardRaised Panel:
2 Equal Sections
Flat Panel with2 Equal Sections
StandardRaised Panel:
Rail Placement with 3 Equal Sections
StandardRaised Panel:
2 Equal Sections and Modified Wide Stiles
StandardRaised Panel:
Rail Placement with Small Top and
Bottom Sections
V-GrooveRaised Panel:
Rail Placement with 2 Equal Sections
StandardRaised Panel:
2 Equal Sections and Quarter Round
Arch Top
CombinationTrue Louver
over V-GrooveFlat Panel with
2 Equal Sections
Standard Raised Panel with 2 Equal
Sections and Decorative Trim
V-GrooveFlat Panel:
Rail Placement with Small
Center Section
StandardRaised Panel:
2 Sections withRail Placement
StandardRaised Panel:
2 Equal Sections
Flat Panel with2 Equal Sections
StandardRaised Panel:
Rail Placement with 3 Equal Sections
StandardRaised Panel:
2 Equal Sections and Modified Wide Stiles
StandardRaised Panel:
Rail Placement with Small Top and
Bottom Sections
V-GrooveRaised Panel:
Rail Placement with 2 Equal Sections
StandardRaised Panel:
2 Equal Sections and Quarter Round
Arch Top
CombinationTrue Louver
over V-GrooveFlat Panel with
2 Equal Sections
Standard Raised Panel with 2 Equal
Sections and Decorative Trim
V-GrooveFlat Panel:
Rail Placement with Small
Center Section
StandardRaised Panel:
2 Sections withRail Placement
StandardRaised Panel:
2 Equal Sections
Flat Panel with2 Equal Sections
StandardRaised Panel:
Rail Placement with 3 Equal Sections
StandardRaised Panel:
2 Equal Sections and Modified Wide Stiles
StandardRaised Panel:
Rail Placement with Small Top and
Bottom Sections
V-GrooveRaised Panel:
Rail Placement with 2 Equal Sections
StandardRaised Panel:
2 Equal Sections and Quarter Round
Arch Top
CombinationTrue Louver
over V-GrooveFlat Panel with
2 Equal Sections
Standard Raised Panel with 2 Equal
Sections and Decorative Trim
V-GrooveFlat Panel:
Rail Placement with Small
Center Section
StandardRaised Panel:
2 Sections withRail Placement
StandardRaised Panel:
2 Equal Sections
Flat Panel with2 Equal Sections
StandardRaised Panel:
Rail Placement with 3 Equal Sections
StandardRaised Panel:
2 Equal Sections and Modified Wide Stiles
StandardRaised Panel:
Rail Placement with Small Top and
Bottom Sections
V-GrooveRaised Panel:
Rail Placement with 2 Equal Sections
StandardRaised Panel:
2 Equal Sections and Quarter Round
Arch Top
CombinationTrue Louver
over V-GrooveFlat Panel with
2 Equal Sections
Standard Raised Panel with 2 Equal
Sections and Decorative Trim
V-GrooveFlat Panel:
Rail Placement with Small
Center Section
CO
MP
OS
ITE
MD
F P
AN
ELE
D S
HU
TTE
RS
14
FORGED IRON BOLT. RLABPSpecs: Overall bolt length 6”, back plate 2 1/4” x 1 1/4”, stainless steel screws included.
STAINLESS STEEL STRAP HINGE, PINTLE AND FASTENERS. AKFBPSpecs: Flush, 13 3/8” strap length, adjustable pintle. (sold each).
SHUTTER RING PULL. APZBPSpecs: 2” x 1 7/8”
SHUTTER "S" DOGS. 518Specs: 7" steel reversible,
(not handed). 4 3/8" lag screw.
SHUTTER HINGE. RK2BQSpecs: 3” x 5” open, maxium throw 2 1/2”, hinge is reversible w/ loose pin. Made w/ curved offset to throw shutter clear of window. Sold in pairs.
Southern Crafted Millwork
offers exterior shutter
hardware for the finishing touch on
your installation. Our hardware is not
only decorative, but functional as well.
Our “L” hinge comes in a 2 ½” offset for
frame construction as well as a 4 ½”
offset for brick construction.
This pintle hinge application allows
for shutter removal. Stainless steel
screw fasteners are provided for
this application.
Additional hardware items are
available upon request.
NEW YORK STYLE SHUTTER HINGE. AK1BI
Frame Construction, Specs: 1 1/4” offset, 2 1/2” reveal.
Brick Construction, Specs: 2 1/4” offset, 4 1/2” reveal.
For increased weather protection, we suggest considering this optional COPPER CAP on Cedar applications.
HA
RD
WA
RE
15 "Enduring Performance, Lasting Beauty"
16"Enduring Performance, Lasting Beauty"
17
Southern Crafted Millwork offers a complete selection
of high quality Western Red Cedar and pressure
treated Pine (other wood species available upon
request). We offer rustic and smooth hand crafted
rafter tails, brackets, corbels, out-lookers and braces
to serve your architectural needs. We incorporate the
rugged features of sound rustic design, traditional
woodworking practices and modern technology.
Our state of the art machinery enables us to provide an
almost limitless combination of custom architecture
millwork. Each product offering is custom made to fit
your individual requirements.
We at Southern Crafted Millwork are confident that you will
find our design capabilities will exceed your expectations.
Southern Crafted Millwork offers a complete line of
exterior shutters in both standard and custom sizes.
We offer our shutters in Radiata Pine, Cedar and
exterior grade high performance wood composite.
Additional wood species are available upon request.
Southern Crafted Millwork shutters are assembled
using traditional mortise and tenon joinery. This
traditional application ensures greater stability and
lasting performance. Exterior shutters are available
in louver, raised panel, flat panel, plank, board and
batten and “V” groove. Our state of the art millwork
facility allows us to offer a limitless combination
of custom features not offered in the millwork
industry. In addition, we specialize in replicating
original shutter designs for historic accuracy.
EXTERIOR LOUVER SHUTTER OFFERINGWestern Red Cedar Flush Stiles and Rails Specifications: STILES: 1 ½” x 1 ¼” RAILS: 2 ¾” x 1 ¼” (top and bottom rails are the same dimension for reverse application. SLATS: 1 7/8” x 5/16”
Radiata Pine Flush Stile and Rail Louver Shutters
Specifications: STILES: 1 ½” x 1 ¼”RAILS: 2 ¾” x 1 ¼” (top and bottom rails are the same dimension for reverse application) SLATS: 1 7/8” x 5/16”
Wood Composite False Louver
Specifications: STILES: 1 ½” x 1”RAILS: top rail: 2 ½”mid rail: 2 ½”bottom rail: 3”
Southern Crafted Millwork’s
“Rustic Wood Brackets and
Out-Lookers” offer strength of
support under roof eaves and
exposed beams for both interior
and exterior application.
As you review this catalog, you
will find examples that illustrates
our ability to replicate historic
millwork practices. We are
confident that you will appreciate
the quality and workmanship
that is produced by our
experienced staff.
RU
STIC
WO
OD
OU
T-LO
OK
ER
S
18
Southern Crafted Millwork offers a complete line of
exterior shutters in both standard and custom sizes.
We offer our shutters in Radiata Pine, Cedar and
exterior grade high performance wood composite.
Additional wood species are available upon request.
Southern Crafted Millwork shutters are assembled
using traditional mortise and tenon joinery. This
traditional application ensures greater stability and
lasting performance. Exterior shutters are available
in louver, raised panel, flat panel, plank, board and
batten and “V” groove. Our state of the art millwork
facility allows us to offer a limitless combination
of custom features not offered in the millwork
industry. In addition, we specialize in replicating
original shutter designs for historic accuracy.
EXTERIOR LOUVER SHUTTER OFFERINGWestern Red Cedar Flush Stiles and Rails Specifications: STILES: 1 ½” x 1 ¼” RAILS: 2 ¾” x 1 ¼” (top and bottom rails are the same dimension for reverse application. SLATS: 1 7/8” x 5/16”
Radiata Pine Flush Stile and Rail Louver Shutters
Specifications: STILES: 1 ½” x 1 ¼”RAILS: 2 ¾” x 1 ¼” (top and bottom rails are the same dimension for reverse application) SLATS: 1 7/8” x 5/16”
Wood Composite False Louver
Specifications: STILES: 1 ½” x 1”RAILS: top rail: 2 ½”mid rail: 2 ½”bottom rail: 3”
19
Southern Crafted Millwork’s
“Rustic Wood Braces” are
not only admired for their beauty
and artistic design but also for
their strength and durability.
Our line of traditional braces
dates back to an earlier period
that reflects simplicity and purity
of design. The range of designs
includes the simple geometry of
a half circle arch and elongated
“S” design of time honored
architecture. Our extensive
offering of traditional designs
makes it easy to find the perfect
solution for your application.
RU
STIC
WO
OD
BR
AC
ES
Southern Crafted Millwork offers a complete line of
exterior shutters in both standard and custom sizes.
We offer our shutters in Radiata Pine, Cedar and
exterior grade high performance wood composite.
Additional wood species are available upon request.
Southern Crafted Millwork shutters are assembled
using traditional mortise and tenon joinery. This
traditional application ensures greater stability and
lasting performance. Exterior shutters are available
in louver, raised panel, flat panel, plank, board and
batten and “V” groove. Our state of the art millwork
facility allows us to offer a limitless combination
of custom features not offered in the millwork
industry. In addition, we specialize in replicating
original shutter designs for historic accuracy.
EXTERIOR LOUVER SHUTTER OFFERINGWestern Red Cedar Flush Stiles and Rails Specifications: STILES: 1 ½” x 1 ¼” RAILS: 2 ¾” x 1 ¼” (top and bottom rails are the same dimension for reverse application. SLATS: 1 7/8” x 5/16”
Radiata Pine Flush Stile and Rail Louver Shutters
Specifications: STILES: 1 ½” x 1 ¼”RAILS: 2 ¾” x 1 ¼” (top and bottom rails are the same dimension for reverse application) SLATS: 1 7/8” x 5/16”
Wood Composite False Louver
Specifications: STILES: 1 ½” x 1”RAILS: top rail: 2 ½”mid rail: 2 ½”bottom rail: 3”
20
Southern Crafted Millwork
offers “Wood Corbels”
with and without back plates.
Our hand carved corbels offer
a perfect solution for interior
application such as cabinets,
bars and mantles. We also offer
a line of unadorned rustic corbels
serving as supports at the point
where exposed ceiling beams
meet the interior walls.
Our exterior corbels offer a
dental detail under soffits and
roof eaves to complete your
design function as well as
architectural detail.
RU
STIC
WO
OD
CO
RB
ELS
WITH BACK PLATE
Southern Crafted Millwork offers a complete line of
exterior shutters in both standard and custom sizes.
We offer our shutters in Radiata Pine, Cedar and
exterior grade high performance wood composite.
Additional wood species are available upon request.
Southern Crafted Millwork shutters are assembled
using traditional mortise and tenon joinery. This
traditional application ensures greater stability and
lasting performance. Exterior shutters are available
in louver, raised panel, flat panel, plank, board and
batten and “V” groove. Our state of the art millwork
facility allows us to offer a limitless combination
of custom features not offered in the millwork
industry. In addition, we specialize in replicating
original shutter designs for historic accuracy.
EXTERIOR LOUVER SHUTTER OFFERINGWestern Red Cedar Flush Stiles and Rails Specifications: STILES: 1 ½” x 1 ¼” RAILS: 2 ¾” x 1 ¼” (top and bottom rails are the same dimension for reverse application. SLATS: 1 7/8” x 5/16”
Radiata Pine Flush Stile and Rail Louver Shutters
Specifications: STILES: 1 ½” x 1 ¼”RAILS: 2 ¾” x 1 ¼” (top and bottom rails are the same dimension for reverse application) SLATS: 1 7/8” x 5/16”
Wood Composite False Louver
Specifications: STILES: 1 ½” x 1”RAILS: top rail: 2 ½”mid rail: 2 ½”bottom rail: 3”
21
Southern Crafted Millwork’s
“Rustic Wood Brackets and
Out-Lookers” offer strength of
support under roof eaves and
exposed beams for both interior
and exterior application.
As you review this catalog, you
will find examples that illustrates
our ability to replicate historic
millwork practices. We are
confident that you will appreciate
the quality and workmanship
that is produced by our
experienced staff.
RU
STIC
WO
OD
BR
AC
KE
TS
Southern Crafted Millwork offers a complete line of
exterior shutters in both standard and custom sizes.
We offer our shutters in Radiata Pine, Cedar and
exterior grade high performance wood composite.
Additional wood species are available upon request.
Southern Crafted Millwork shutters are assembled
using traditional mortise and tenon joinery. This
traditional application ensures greater stability and
lasting performance. Exterior shutters are available
in louver, raised panel, flat panel, plank, board and
batten and “V” groove. Our state of the art millwork
facility allows us to offer a limitless combination
of custom features not offered in the millwork
industry. In addition, we specialize in replicating
original shutter designs for historic accuracy.
EXTERIOR LOUVER SHUTTER OFFERINGWestern Red Cedar Flush Stiles and Rails Specifications: STILES: 1 ½” x 1 ¼” RAILS: 2 ¾” x 1 ¼” (top and bottom rails are the same dimension for reverse application. SLATS: 1 7/8” x 5/16”
Radiata Pine Flush Stile and Rail Louver Shutters
Specifications: STILES: 1 ½” x 1 ¼”RAILS: 2 ¾” x 1 ¼” (top and bottom rails are the same dimension for reverse application) SLATS: 1 7/8” x 5/16”
Wood Composite False Louver
Specifications: STILES: 1 ½” x 1”RAILS: top rail: 2 ½”mid rail: 2 ½”bottom rail: 3”
22
Southern Crafted Millwork’s
“Rustic Wood Rafter Tails”
compliment the Old World detail
found in classical architecture.
Our rafter tails can be used as a non
functioning design element or for
structural support.
We offer a verity of rafter tail
designs to best incorporate your
architectural needs. The examples
represented on this page reflect
only a few of our design capabilities.
RA
FTE
R T
AIL
S
23 "Enduring Performance, Lasting Beauty"
Add beauty and warmth to your home with
Southern Crafted Millwork's Custom Mantels
24"Enduring Performance, Lasting Beauty"
Add beauty and warmth to your home with
Southern Crafted Millwork's Custom Mantles
Southern Crafted Millwork offers a complete line of
“custom” fireplace mantels and mantel shelves that are
limited only by your imagination. All of our mantels are
made from the finest quality materials and workmanship
available in the industry. Many of our mantels are
designed with “hand carved” corbels and embellishments
to give your mantel the custom features that you desire.
Our woodcarving collection has over 500 handcrafted
profiles to select from. It has been our experience that
wood carvings add depth and drama to any room. All
of our mantels are unfinished and available for paint
or stain finishes. Please visit our Pineville showroom
location to better understand the quality of workmanship
that goes into every mantel we produce.
25
26"Enduring Performance, Lasting Beauty"
“There is no place more delightful than one’s own fireplace.”
27
The Belk
The Charlotte
MA
NTE
LS
28
The Holiday
The Estate
MA
NTE
LS
29
SOUTHERN CRAFTED MILLWORK 10201 Industrial Drive, Pineville, N.C. 28134
"Enduring Performance, Lasting Beauty"
A = Overall Height ____________________________________________________________________________
B = Opening Height ___________________________________________________________________________
C = Opening Width ____________________________________________________________________________
D = Overall Shelf Length _______________________________________________________________________
E = Body Width ______________________________________________________________________________
F = Shelf Depth ______________________________________________________________________________
G = Return Depth (Cavity Behind Surround) _________________________________________________________
X = Leg Width _______________________________________________________________________________
Y = Leg & Shelf Overhang ______________________________________________________________________
Z = Breast Height _____________________________________________________________________________
Check Box ¨ Paint ¨ Stain
PLEASE CHECK WITH THE LOCAL BUILDING CODES TO DETERMINE THE DISTANCE REQUIRED FROM THE FIRE BOX OPENING TO THE BOTTOM OF THE MANTLE SHELF AS WELL AS THE DISTANCE REQUIRED ON EACH SIDE OF THE MANTLE AS IT RELATES TO THE FIRE BOX OPENING.
MANTLE DESIGN SPECIFICATIONS
D
Z
F
A
G
E
B
C
X
Y
30
Fluted Round Column with Roman Corinthian Capital and Attic Base
"Enduring Performance, Lasting Beauty"
31
Tapered Square Craftsman Style Column with Recessed Panels
Southern Crafted Millwork offers a complete line of
architecturally correct fiberglass and pvc columns.
Our product offering includes a complete line of round
tapered and non tapered smooth and fluted columns.
We also offer square columns in smooth, raised panel
square and recessed square panel.
In our craftsmen style columns, we offer tapered square,
tapered radius square and recessed square panel for
pedestal application. In addition to the styles mentioned
above, we offer custom sizing as well as split columns or
posts for pilaster application.
Round Capitals and BasesTuscan Capital | Tuscan Base | Doric Capital
Attic Base | Non-Tapered Cap and Base
Round Decorative CapitalsRoman Corinthian | Scamozzi
Temple of the Winds | Roman Ionic
Tuscan BaseTuscan Capital
Doric Capital Attic Base
Roman Corinthian Scamozzi
Temple of the Winds Roman Ionic
Southern Crafted Millwork’s
fiberglass columns and capitals
are load-bearing and require no
additional plugs to transfer weight
(refer to our tech section in the back
of this catalog).
Our fiberglass columns and capitals are
highly detailed and will require very
little sanding.
Southern Crafted Millworks fiberglass
columns are available with Class A
Certification when tested for flame
spread and smoke standards set forth
under ASTM E84 performance standards.
CO
LU
MN
S A
ND
CA
PIT
ALS
32
33
CO
LU
MN
S A
ND
CA
PIT
ALS
Square Column shown with Tuscan Capital and Tuscan Base
Square Tuscan Capital
Square Tuscan Base
Square Alto Base
34
Craftsman Moulding for all Square Tapered PostsFits All Size Square Tapered PostsWidth: 1 3/8" Height: 2 5/8"
Square Tapered Radius and Standard
Square Tapered Craftsman Style Columns
CO
LU
MN
S A
ND
CA
PIT
ALS
35
CO
LU
MN
S W
RA
PS PVC COLUMN WRAPS
The column wrap can transform an
ordinary post into a beautiful and
elegant presentation for any style of
home. Fabricated from low mainte-
nance cellular PVC. PVC column wraps
provide classic style with today's
performance.
Features and Benefits > Installs around the support
structure so the integrity of the
column is not dependent on the
structural post.
> Available in multiple styles
suitable for both interior and
exterior applications.
> Constructed of durable PVC that
won't rot, chip or flake, and covered
by a limited lifetime warranty.
Southern Crafted Millwork offers custom PVC columns
pre-assembled with added support
for your particular application.
HARDWARE
Round Installation Bracket Kit
This kit contains 3 brackets
manufactured from a custom
dye to properly fit the dimension
of your column along with 6 self
tapping construction grade screws.
Our bracket kits can assist in the
prevention of product kick-out.
Square Installation Brackets KitYou will receive 2 square
brackets and 4 self tapping screws.
Again, this kit is an aid in preventing
product kick-out.
36
CU
STO
M P
RO
DU
CTS OPTIONS
Custom Cuts and ProductsGetting you exactly what you need is
a principal element of our business.
Your satisfaction is our main concern
at Southern Crafted Millwork. We
understand that dimensions vary by
project. Sometimes the post height is
a little taller than a standard 8x8 or a
column needs to be slightly short of 18
feet. Whatever the requirements, we
can make the modifications that suit
your needs.
Plan Types
Just like custom lengths can be
required to properly fit an opening, it is
sometimes necessary to make vertical
cuts. The scope of your project may call
for the use of half columns or posts as
pilasters or maybe you need a quarter
cut column for a room corner. We have
the ability to meet your specifications.
Split columns can add an element of
sophistication to even the
smallest spaces.
37
TECHNICAL PRODUCT DATA
Load-Bearing SpecificationsSouthern Crafted Millwork's columns are tested using concentric loading. You will find
load limits listed below. The load limits are specific to a product's diameter or profile and
predicated on 100% coverage at the top and bottom of a round or square column.
Fire Rated ProductFire rated products available for purchase. Our fire rated products have received
Class A Certification through testing for flame spread and smoke developed standards set
forth in the ASTM E84 Test.
RoundColumns
8,000 10,000 14,000 18,000 20,000 20,000 20,000 20,000 20,000 lbs lbs lbs lbs lbs lbs lbs lbs lbs
6" 8" 10" 12" 14" 16" 18" 20" 24"
6,000 10,000 12,000 14,000 14,000 N/A N/A N/A N/A lbs lbs lbs lbs lbs SquareColumns
Diameter
Model shown above is unfinished Maple
IRO
NIN
G C
EN
TE
R
38
Model 215• Available wood species:
Maple – Knotty Alder – Red Oak
Product Specifications
• White melamine Prefinished
cabinet interior.
• 41” white melamine plywood
ironing board with swivel feature.
• High quality ironing board cover and
pad included.
• Raised panel cabinet door
unfinished to meet your
finishing needs.
• Cabinet door can be installed for left
hand or right hand operation.
Includes 3 self closing hinges.
• Matching wood species on cabinet
face frame.
• Built in storage shelf for iron
and starch.
• Built in heat shield allows iron to
cool down safely.
• Cabinet is 5 5/8” deep and projects
2 ¾” from the wall.
• Cabinet requires a rough opening of
14 ¼”... fit between studs.
• Optional #21 electrical timer
package available.
• Made in the USA with furniture
quality materials and construction.
Optional Electrical Timer Package
IRO
NIN
G C
EN
TE
R
39
List PriceIroning Board Cabinet shown in Maple.
Oak and Knotty Alder is also available.
Electrical Package optional.
Model shown above is unfinished Maple
Swivel Feature is standard
on our model #215
40"Enduring Performance, Lasting Beauty"
41
SE
TTE
E B
EN
CH
ES Southern Crafted Millwork
has now expanded their millwork
capabilities by introducing “Mud Room
Cubbies” or sometimes called “Settee
Benches”. These benches are designed
to hold gear that simply tells a story of
you and your families daily activities.
These units are constructed with 3/8”
beaded Radiata Pine plywood, medium
density fiberboard suitable for painting
and an applied Poplar coat hook board.
Various styles are available within our
product offering. Our benches combine
fashion and function in a unique way.
The type you choose will not only offer
function, but also visual interest as well.
Southern Crafted Millwork's Settee
Benches are available in custom sizes
and custom configurations.
Our Standard Offering
SETTEE BENCH A:
6 ft. or less in width, 7 ft. in height and
18” in depth, to include up to three
“open” storage bins applied to the
bottom of the unit.
SETTEE BENCH B:
6 ft. to 8 ft. in width, 7 ft. in height
and 18” in depth, to include up to four
“open” storage bins applied to the
bottom of the unit.
SETTEE BENCH A
SETTEE BENCH B
SE
TTE
E B
EN
CH
ES AVAILABLE OPTIONS
SETTEE BENCH C:
6 ft. or less in width, 7 ft. in height and
18” in depth, to include up to three
“open” storage bins for both top and
bottom storage applications.
SETTEE BENCH D:
6 ft. to 8 ft. in width, 7 ft. in height
and 18” in depth, to include up to four
“open” storage bins for both top and
bottom storage applications.
SETTEE BENCH E:
6 ft. or less in width, 7 ft. in height and
18” in depth with an operating “Deacon
Bench” for concealed storage. In ad-
dition, up to three “open” storage bins
will be applied to the top of the unit.
42
SETTEE BENCH C
SETTEE BENCH DSETTEE BENCH E
43 "Enduring Performance, Lasting Beauty"
3D imagery is only limited by your imagination.
"Enduring Performance, Lasting Beauty" 44
45
Southern Crafted Millwork is proud to offer VECTOR
ART 3D, which provides relief style clip-art for
computer controlled routing and engraving. Vector Art
can create dimensions in raised, dished or recessed
with a hand carved edge. We offer high quality imagery
that can be produced on wood, wood composite or PVC.
Vector Art 3D takes the cost and complexity out of
producing decorative carved parts through a software
program designed to produce exacting images on a CNC
router. What Vector Art 3D can create, is limited only by
your imagination.
The images shown on the following pages are examples
of our product capability. These images are only a few
examples of what we can create with Vector Art 3D.
EN
GR
AV
ING Request a quote:
It is our goal to provide quotes within
24 hours, but please allow up to 72
hours on more complex requests. Our
lead times are approximately 4 weeks,
once we have all the information
needed to complete a quote. We cannot
provide a quote without a specific image
to base the model on. For most work we
will need a reference image, sketch,
photo or CAD drawing. Additional image
examples can be found on website
“Vector Art 3D download.”
Product Information: We will need the actual width, height,
depth and quantity of the part or parts
you are asking us to produce. Any
additional detail you can provide will
help us in finalizing your quote request.
46
EN
GR
AV
ING
47
SOUTHERN CRAFTED MILLWORK 10201 Industrial Dr., Pineville, NC 28134 704.941.3702 www.southerncraftedmillwork.com "Enduring Performance, Lasting Beauty"
WARRANTY DOCUMENT
Southern Crafted Millwork offers a one year warranty to the original purchaser, for only the original property where products were installed. This warrantee covers defects in material
workmanship providing that our millwork products were installed to our specifications. With regard to exterior product applications, the purchaser accepts responsibility
for finish application and subsequent performance of the finish coat.
In the event of a claim during the warranty period, Southern Crafted Millwork, at its sole option, will either repair or replace the warranted product or refund to the purchaser
a sum equal to the actual price paid for the product, less shipping and taxes if applicable.
"Enduring Performance, Lasting Beauty"
SOUTHERN CRAFTED MILLWORK 10201 Industrial Dr., Pineville, NC 28134
704.941.3702
YOU CAN VISIT THESE LOCATIONS FOR SOUTHERN CRAFTED MILLWORK PRODUCTS VIEWED IN THIS CATALOGUE
10201 Industrial Dr., Pineville, NC 28134
704.889.8182
1168 St. Marks Church RoadBurlington, NC 27215
336.584.1349
2591 Jenkins Dairy RoadGastonia, NC 28052
704.824.8182
5042 Hampton Ridge RoadRock Hill, SC 29732
803.366.8182
205 Wattling RoadWest Columbia, SC 29170
803.939.9290