Post on 10-May-2018
transcript
New Products& SPECIAL OFFERS
Specialist Tool Solutions
Featuring the New & Exclusive
may toaugust2018
www.sykes-pickavant.com 01543 6799001
€1362.00
€256.50
€318.00 €147.95
HYDRAULIC HUB PULLER KIT
HYDRAULIC & MECHANICAL HUB PULLER KIT
HEAVY DUTY 9KG SLIDE HAMMER
UNIVERSAL HUB PULLER & DRIVE SHAFT KIT
UPGRADE OPTION - THREAD ADAPTOR SET
star buy
new TO RANGE
085300SP
12730600
08583200
08535000
08583600
• For use on a variety of wheel stud pattern applications - 4, 5, 6 stud hubs, with pitch circle up to 203mm
• SP hydraulic ram allows for smooth, progressive application of up to 8 tonnes of force
• Includes heavy duty force screw with impact handle where shock action is required to ‘break’ stubborn hubs
• Leg Reach: 158mm
• Stud Hole Diameter: 15.8mm
Universal kit for pressing out, pulling in and separating drive shafts as well as disassembling/assembling wheel hubs
• Suitable for vehicles such as SUVs & transporters with an M14 wheel attachment and bolt circle of up to ø 136mm
• The anti-swivel puller is suitable for common nuts and bolt-secured drive shafts (e.g. VW / Audi)
Can be used with:
• 150000V2 - 8 Tonne Ram
• 180000V2 - 10 Tonne Ram
• 08530900 - Slide Hammer
• 12731100 - Shock Handle
• 08583200 - Slide Hammer
Mounting unit for Heavy Duty Slide Hammer - 08583200
• Supplied with 4 x commonly used slide hammer adaptors
• 1 x system adaptor tool, M18 x 1.5 with mounting bore (jointed connection) for universal hooks, double extractor hooks, bow hooks, bodywork pull clamps etc. Suitable for Müller /Klann /KS /Pichler
• 1 x system adaptor tool, M18x1.5/1-1/2 inch x 16 for wheel hub puller. Suitable for Müller /KS /Pichler
• 1 x universal adaptor with ball joint, M18x1.5, for use between the slide hammer and the tool, enables work in hard-to-reach places. Suitable for all systems
• 1 x system adaptor tool, M18 x 1.5/M22x2.0, for wheel hub puller. Suitable for Facom• Length: 770mm • Connection Thread: M18 x 1.5
FOR USE IN 3, 4 OR 5 LEG COMBINATIONS
NEW
hub pulling
Consists of manual and hydraulic components Includes:
• 08530800 - Specially designed extra-wide hub puller plate
• 150000V2 - 8 Tonne Hydraulic Ram c/w nose piece & 2” extension
• 087580-05 - Mechanical Screw - 1 1/2” whit
• 08530700 - Slide Hammer - 5/8” UNF x 1.6kg
• 08531270 - Adaptor for Slide Hammer
8 tonne
€262.50LIST PRICE: €319.14
SAVE: €56.64
Suitable for removing injectors, wheel hubs, supporting joints etc. with relevant accessories
• 8 tonne (approx.) maximum force
• Loosens even the tightest connections; pressed or rusted in
• For driving out components and straightening jobs on bodywork with extra tough heavy-duty design and practical handles
• Weight: 9kg
SALES@sykes-pickavant.com1 2
€1305.00
€352.95
€227.95
€113.95 €113.95€113.95
€159.50
€330.50
€198.95
€250.75
€198.95
€238.95
€382.00 €815.00 €564.00
€797.95
€250.75
€28.45 €36.45
UNIVERSAL PRESS FRAME C/W 12 TONNE HYDRAULIC RAM
UNIVERSAL C-CLAMP
Land Rover Swivel Ball Joint Adaptor Set
Adaptor Ring
Opel Movano / Renault Master / Nissan
Interstar - UPPER Ball Joint Adaptor Set
Opel Movano / Renault Master / Nissan
Interstar - LOWER Ball Joint Adaptor Set
Land Rover Discovery 3 & 4Suspension Bush Master Kit
Fiesta & Focus Bush Kit
Multi-applicationStep Plate
XS Sleeve Kit - Master
Car / LCV Sleeve Kit
SUV / LCVSleeve Kit
Commercial Sleeve Kit
Upgrade Kit - From 08790000
to 08797500
Fiesta Bush Adaptor Set
Focus Bush Adaptor Set
Front Lower Kit Rear Lower Kit
Rear Upper Kit Front Upper Kit
Land Rover Bush Press Kit
“take the press to the vehicle”
187000V2
18771000
18780400
187502V3 187503V3
187403V3 08269000
18777000
1873250018775100
08786500 08780000 08790000 0879750008795000
18732100
18732200
18777100
18777200
18777300
18777400
18775000
18780500or
Mercedes Sprinter Ball Joint Tool Adaptor Set
Ford Transit Lower Arm Bush Tool
€352.95
suspension
€113.95LIST PRICE: €119.64
SAVE: €5.69
€113.95
€432.00
LIST PRICE: €119.64
LIST PRICE: €454.86
SAVE: €5.69
SAVE: €22.86
187502V3 + 187503V3 only for use with
187000V2 Press Frame
www.sykes-pickavant.com 01543 6799003
€216.50
€478.00€285.00
€216.50
08730500
087304V2
0808000008085000
08512800
084500V2
For the installation and removal of the rear axle body mounting bush found on Fiesta Mark VI 2008 onwards
• Updated kit now also capable of installing & removing the longer bush as fitted onto the nearside of newer model Volvo cars
• One person operationApplications
• Ford: Mondeo / Mondeo Estate ‘07-, S-Max & Galaxy ‘06-
• Volvo: XC70 & V70 ‘07-, XC60 ‘08-, S60 & V60 ‘10-
• For detecting faults in:- Wheel bearings- Suspension joints and suspension struts- Stabilizers, bushes and ball-joints- Steering gear and links
• The tool creates a rocking motion in any direction (forward angle, side angle etc.) in order to detect movement in steering and suspension components
• Recommended for use on four post lift or on floor
• Innovative and safe handling of springs on cars with wishbone and multilink suspension
• The only tool on the market capable of handling among others VW Touran, Citroën C3, Skoda Octavia, and Peugeot 107
• The ultra compact design makes it possible to use the tool for cars with a small hole in the rear spring control arm down to ø30 mm
• The innovative angled shape of the jaws provides a high degree of functionality and improves safety
• Comes with a unique safety key torque, which makes it easier, safer and more convenient to position the tool correctly inside the spring
• The safety key prevents overload and thereby improves safety
For lowering of the suspension arms and separation of suspension components
• Reduced effort required, due to unique design using leverage and body weight
• Adjustable swing point allows for variable LH & RH applications
To remove and install the rear axle body bush on the vehicleSuitable For: Astra H (L48) ‘04- / Astra GTC (L08) ‘05- / Astra H Box (L70) ‘04- / Astra Estate (L35) ‘04- / Astra Saloon (L69) ‘07- / Astra TwinTop (L67) ‘05- / Meriva B ‘10- / Zafira B (A05) ‘05-
FIESTA MARK VI REAR BUSH KIT
FORD & VOLVO REAR WISHBONE / TRAILING ARM BUSH TOOL KIT
ASTRA H / ZAFIRA REAR AXLE BUSH KIT
INTERNAL COIL SPRING COMPRESSOR
UNIVERSAL SUSPENSION ARM LEVERSUSPENSION WEAR INDICATOR
on vehicle solution NEW
suspension
SPECIAL JAW DESIGN
€188.95LIST PRICE: €227.94
SAVE: €38.99
€79.74
An innovative tool for detecting suspension and axle joint wear
SUITABLE FOR PRE MOT TESTING
SALES@sykes-pickavant.com3 4
€196.95
€740.00
suspension
08041000
08100000 96040000
08065000
08145000
080500V2
• Simple tool to use with ‘Vibro-Impact’ air hammer (90206000) when bolt ends protrude from housing
• Sleeve guides the impact end to free off and push bolt through the housing
• Extension adaptor for removing bolts deep in the housing
• Can be used in conjunction with 08485000 Hub Clamp Spreader Tool
• Drop forged rugged, flat design with 3 interchangeable forks
• Forks are attached to the centre screw to allow continuous adjustment within the jaw capacity range
• Features an internally operated drive spindle (M24) and an elongated recess in the forks, providing a safe & secure operation
• Jaw capacity range: 30 - 65mm
• 3 x fork sizes: 24, 27 and 31mm
• Ideal for use on vehicles: Audi / VW (A3, A4 and A6 with double wishbone), BMW & Mercedes-Benz
• For the removal of bearings, races, sleeves etc.
• Removes the need for cutting tools – greatly reduces time required
• Unique patented design – specially designed cutting edges
• Legs ‘cut’ and are pressed into the radius behind the ring
• ‘Loose / Tight’ pulling principle - force is applied evenly around the ring
• Suitable for all kinds of bearings / rings – 40-60mm
Applications Include:
• ABS Sensors
• Brake Bleeder Nuts
• Exhaust System
• Heat Treating
• Inline Connectors
• Metal Fabrication
• O2 / DPF Sensors
• Truck Bed Bolts
• Body Panel Dents
• Tie Rod / Ball Joint Ends
• Suspension Components
• Steering Components
• U-Bolts
Generates ‘Invisible Heat’ to release corroded and thread locked metal components without the danger of an open flame
• Angled design with trigger
• Coil Twist Lock™
• LED usage indicator
• Fault override delay
• User controlled LED light switch
• Fan operation enhancements
Complete set for mounting and dismounting wheel bearings and for assembling hubs
• The large number of pressure bushes and centering washers in this kit makes it ideal for a wide range of applications upon cars, vans and transporters
• Guarantees safety and accuracy at all stages of the working operation
• Also ideal for use with a press machine; suitable for wheel bearings, silent bearings, bushes, washers, hubs etc.
• The special design of the components provides installation without damage
• Pressure is placed on the outside of the bearing ring for bearing installation and the inside for hub installation
• Unique 4-way lever design allows for a wide variety of applications
• 4 options are available, by removing the pin and selecting any of the 4 positions
• Tapered, slim jaw fork design with tough, black epoxy coating
• Jaw Opening: 24 / 30 / 40 / 45mm options
• Jaw Throat Width: 19mm
• Jaw Throat Depth: 30mm
VW ALLOY 4 LINK SUSPENSION BOLT REMOVER SET
UNIVERSAL BEARING RING PULLER INDUCTION HEATER +
3-SIZE BALL JOINT SEPARATOR
UNIVERSAL WHEEL BEARING KIT
4 WAY BALL JOINT SEPARATOR - CAR / LCV APPLICATIONS
two year warranty
BEARING REMOVAL BEARING INSTALLATION HUB INSTALLATION
KIT CONTENTS• 1 x Coil
• 1 x String
• 1x Bearing Buddy
NEW
€695.00€262.50
€38.75 €73.95
LIST PRICE: €319.14
LIST PRICE: €47.82 LIST PRICE: €88.56
SAVE: €56.64
SAVE: €9.07 SAVE: €14.91
www.sykes-pickavant.com 01543 6799005
Range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic ram return system & V blocks
• Heavy duty steel frame
• Automatic arm return
• Manufactured in the EU
• Two speed pump
• Pressure gauge
WORKSHOP presses
best selling modelsAVAILABLE IN 4 RATINGS:
15T, 20T, 30T & 50TPART NO. RATING HEIGHT
(mm)WIDTH (mm)
DEPTH (mm)
BED DEPTH(mm) RANGE WEIGHT
(kg) PRICE
53436000 15T 1930 920 650 170 85 - 950 150 €774.00
53436200 20T 2030 940 650 180 65 - 1030 165 €911.00
53436400 30T 2060 1120 650 200 115 - 1020 230 €1495.00
53436500 50T 2290 1220 650 210 70 - 1065 370 €2165.00
*For models 53436400 & 53436500
‘SILVER SERIES’ HYDRAULIC WORKSHOP PRESSES
• Piston over-travel limit stop
• Overload safety valve
• V blocks
• Winch for table*
N.B. For deliveries made outside UK Mainland, an additional carriage charge will apply / Other sizes of press are available - Contact Customer Services or visit www.sykes-pickavant.com for details
€261.00
€95.00
newbestseller
for use with press block - 08770000
press support blockUNIVERSAL PRESS RING
A quick solution to assist the bearing to be pressed out on a wide range of common hubs
• Ideal large void for holding hubs and pressing out wheel bearings
• Large diameter sits across the press allowing for large hubs to be placed on the press ring
• Useful alternative to V blocks and old bearing casings
• Suitable for use on 30 or 50 tonne rated presses
• Dimensions: 160mm (h) x 179mm (ø)
• Weight: 7.8kg
Universal Press Support Block
• Press bearings on a variety of suspension arms
• Three point contact for perfect, safe support
• Adjustable height anvil bolts
• Swivel element for added versatility
• Numbered system for recording specific applications
• Suitable for use with presses up to 30T
0877000053452200
60 - 100 TONNE HAND OPERATED & ELECTRO-HYDRAULIC PRESSES ARE ALSO AVAILABLE - SEE WEBSITE FOR DETAILS
SALES@sykes-pickavant.com5 6
SUSPENSION WORKSTATIONS
our workstations evolve as and when required
MARKET LEADING MODEL
heavy duty
Universal piece of equipment for assembling and disassembling struts and coil springs on cars, 4WDs and LCVs
• Safety switch prevents operation when gates are open
• Adjustable strut vice with 4 x setting options
• Interchangeable jaws/ vice to suit different springs
• Unique double depth front plate
• Length of travel: 330mm
• Up to 2452kg of force (at 10 bar)
• Top arms & jaws adjust and lock to secure spring
• Automatic jaw levelling
• 4 x floor mounting holes
• Includes 2 x standard brackets: 78-130mm and 105-182mm
385800SP
38680000
PNEUMATIC COIL SPRING COMPRESSOR WORKSTATION
MECHANICAL COIL SPRING COMPRESSOR WORKSTATION
• Fitted with Heavy Duty Mechanical Components instead of Pneumatics - Ideal for mobile use or where air supply is not practical
• High power mechanical spindle allows for the application of up to 1600kg of compression force onto contained spring
• Long main spindle achieves a large 420mm stroke
• Powered by easy access 19mm hex drive on top of tool directly onto main spindle and can be used with either hand tools or impact air tools
• Includes adjustable vice clamp
ideal for mobile use
• Mounts between original top arm and jaw attachment
• Use to extend the length of the top spring mounting jaw position
• Can be used singly to provide 10mm extension or as a pair for 2 x 10mm extension
• Mounts onto top arms in place of standard top jaws & contacts directly onto spring
• Jaw ‘floats’ to follow changes in spring angle / profile during compression
• Works on left and right handed coil springs when used with brackets below
Suitable for: Rear Springs
• Mercedes ML Class 163 1997-2005
Suitable for: Front Springs
• Mercedes C Class (W205) 2015 onwards
Suitable for: Front Springs
• Mercedes C Class (W204) 2008-2014
• Mercedes E Class Coupe (W207 / C207) 2009 onwards
For Leftwards Front Spring Applications (between 105 - 187mm) Including Nissan Qashqai (J10 2006 - 2013), Renault Koleos and Laguna
MERCEDES BRACKETS
ARM EXTENDER - PAIR SWIVEL JAWS - PAIR
LEFTWARDS SPECIAL BRACKET
BMW SPECIAL BRACKET
JAW HOLDER
UPPER JAW SET
38580000 COVER
MIRROR
COIL SPRING CLAMP
DOUBLE DEPTH STRUT VICE
NISSAN SPECIAL BRACKET
38480800
385800-60 385800-61
38481600
38580200
38480200
3858COVER
385800-50
38580400
38480700
38481100
3848090038481000
38480600
Suitable for:
• BMW Base Coupe 2-Door 2003 - 2011
• Base Sedan 4-Door 2003 - 2011
• xDrive30i Sport Utility 4-Door 2007 - 2010
• 3.0si Sport Utility 4-Door 2007 - 2008
• For use with 3858 and 3868 workstation brackets
• Includes 3 x hanging hooks and 4 x slots for brackets
• Provides a tidy and safe storage solution
• For high compression and close coil springs (Toyota / Honda etc.)
• For protection of the 38580000 Coil Spring Compressor Workstation when not in use
Adjustable upper mirror for better centering of the shock absorber cap during assembly and operation
• Compatible with any of our workstations
• Magnet attachment
• Tool to secure coil spring into lower bracket for use with the SP range of suspension workstations
• Designed to hold the coil spring still during initial compression and restrict twisting through the bracket
• Rubber dipped to prevent scratching the coil spring
• For use with extra long strut assemblies
• Chrysler Voyager
Suitable for:
• Nissan Qashqai (J11 2014 - )
INCLUDES FREE ADAPTOR BRACKET SET (38780100)
€90.95
€90.95
€43.25
€59.95
€33.95
€90.95
€90.95
€53.50
€176.95
€144.75
€113.95 €113.95
€113.95
€143.50
€2046.00LIST PRICE: €2160.30
SAVE: €114.30
€1020.00
www.sykes-pickavant.com 01543 6799007
torque
Motorq Professional Torque WrenchES• Accurate to ±3% of reading which meets and exceeds ISO6789:2003
• 60% larger scale for better visibility and improved accurate setting
• Scale adjusts 40% faster and the effort required to adjust is reduced
• Improved serviceability means longer life and reduced ownership costs
• Superior, ergonomic handle and shape - Soft-feel, high grip material and more comfortable to use
• Now includes a push/pull type lock for faster use; the coloured band on the lock clearly shows that the wrench is unlocked
• New Timestrip® Feature - Torque wrenches should be calibrated once a year as a minimum, more frequently in harsh environments and with high levels of usage
MADE IN THE UK
Our new torque wrenches feature the Timestrip® which provides a visual indication when the wrench is due for re-calibration and has 3, 6, 9 and 12 month graduations
PROFESSIONAL SCALE
PUSH-THRU HEAD
TIMESTRIP
ALSO FEATURES
®
‘Motorq 20’ - 3/8” Push-Thru Torque Wrench
‘Motorq 50’ - 3/8” Push-Thru Torque Wrench
‘Motorq 100’ - 1/2” Push-Thru Torque Wrench
‘Motorq 200’ - 1/2” Push-Thru Torque Wrench
‘Motorq 300’ - 1/2” Push-Thru Torque Wrench
‘Motorq 340’ - 1/2” Push-Thru Torque Wrench
‘Motorq 340’ - 3/4” STEPPED Torque Wrench
4 - 20 Nm
10 - 50 Nm
20 - 100 Nm
40 - 200 Nm
60 - 300 Nm
60 - 340 Nm
80 - 400 Nm
• 3/8” push thru sq dr
• Length: 210mm
• Supplied in poly tube
• 3/8” push thru sq dr
• Length: 335mm
• Supplied in blow moulded box
• 1/2” push thru sq dr
• Length: 387mm
• Supplied in blow moulded box
• 1/2” push thru sq dr
• Length: 470mm
• Supplied in blow moulded box
• 1/2” push thru sq dr
• Length: 593mm
• Supplied in blow moulded box
• 1/2” push thru sq dr
• Length: 685mm
• Supplied in blow moulded box
• 3/4” sq dr (uses stepped convertor)
• Length: 686mm
• Weight: 1.93kg• Supplied in blow moulded box
• 80 - 400 Nm / 60 - 300lbs.ft
• 4 - 20 Nm / 40 - 180lbs.in
• Weight: 0.36kg
• 10 - 50 Nm / 7.5 - 37.5lbs.ft
• Weight: 0.7kg
• 20 - 100 Nm / 15 - 75lbs.ft
• Weight: 0.94kg
• 40 - 200 Nm / 30 - 150lbs.ft
• Weight: 1.07kg
• 60 - 300 Nm / 50 - 220lbs.ft
• Weight: 1.42kg
• 60 - 340 Nm / 50 - 250lbs.ft
• Weight: 1.48kg
80002000
80105000
80110000
80120000
80130000
80134000
80140000
€138.00
€162.50
€162.50
€180.75
€199.25
€214.95
€279.00
N.B Time strip not included with this model
SALES@sykes-pickavant.com7 8
€44.50 €72.25
€189.00
€546.00 €865.00
€135.00
€432.00
silbertool®
silbertool thread reformer®
PER ROLLER PACK
MAIN ASSEMBLY*
MAIN ASSEMBLY* MAIN ASSEMBLY*
MAIN ASSEMBLY*
PER ROLLER PACKMORE ROLLER PACKS HERE
WATCH THE VIDEO HERE
WATCH THE VIDEO HERE
WATCH THE VIDEO HERE
WATCH THE VIDEO HERE
WATCH THE VIDEO
01426000 & ROLLER PACKS
01431100 & ROLLER PACKS
MORE ROLLER PACKS HERE
PER ROLLER PACK
01421600
01431100
01423600
01426000
M5 - M16 M10 - M36
M50 - M110M10 - M60
NEWOur new range of External Thread Reform Tools use innovative non-cutting technology to return threads from M5 – M110 back to their original shape
• Allows original parts to be reused rather than replaced
• Works on all types of thread including metric, fine and imperial with compatible rollers
• No external energy source is required; process is completed by hand
• Threads aren’t weakened during the reforming process; cold hardening leaves the thread 39% harder than those which have been cut
• Threads reformed with the Silbertool® withstand the same static and dynamic loads as a new undamaged thread, with a higher fatigue endurance limit
• The finished surface is smoother than if cut which reduces the chance of corrosion and improves thread lifespan
Perfect for truck axles due to large thread diameter accommodation
Roller packs must be used with the thread reformer; available in sets of 3, they are interchangeable and available to purchase separately
THREAD REFORMER OPTIONS
POPULAR COMPATIBLE ROLLERS FOR THE 01421600
POPULAR COMPATIBLE ROLLERS FOR THE 01426000 & 01431100
POPULAR COMPATIBLE ROLLERS FOR THE 01423600
+
014216-304
014311-104 014311-106 014311-108
014236-203 014236-206
014236-207014236-204
014236-205
014216-305
014311-105 014311-107 014311-109
014216-306
Metric 1.00mm
Metric 1.25mm Metric 1.75mm Metric 2.50mm
Metric 1.00mm Metric 1.75mm
Metric 2.00mmMetric 1.25mm
Metric 1.50mm
Metric 1.25mm
Metric 1.50mm Metric 2.00mm Metric 3.00mm
Metric 1.50mm
* Rollers required but not included
* Rollers required but not included
* Rollers required but not included
* Rollers required but not included
www.sykes-pickavant.com 01543 6799009
€2449.00
WORKSHOP EQUIPMENT
The Fortron Injector Max Machine provides a simple and effective method of cleaning both petrol and diesel fuel systems without the removal of injectors from the vehicle
• Cleans the complete fluid systems without disturbing / removing any key components
• Includes comprehensive adaptor set and Injector Max Fluids - Petrol & Diesel
• Operates using compressed air
• Multi Functional - Cleans fuel injectors, fuel lines, fuel pumps, combustion chambers and throttle body systems
• Removes all deposits from the fuel system without damaging the engine, fuel pump and fuel lines
• New technology Injector Max system cleaning fluids are suitable for all vehicles including the latest style common rail diesel engines - Made in Britain to be compatible with European fuels and recognised bio-diesels
53403500FORTRON INJECTOR MAX
INCLUDES:
INCLUDES:
INCLUDES:
INCLUDES:
FOR CARS SUFFERING WITH LACK OF POWER, ROUGH IDLE OR POOR FUEL ECONOMY
BENEFITS INCLUDE:IMPROVED MPG
IMPROVED POWER
LOWER EMISSIONS
SMOOTHER PERFORMANCE
CO2
Comprehensive adaptor set
FREE leaflet dispenser & Injector Max leaflets
Listing on the Injector Max Garage Directory
As featured on our website
Access to the Fortron-Zone Forum
Share and gain knowledge
OTHER MACHINES, FLUIDS AND ACCESSORIES HERE!
SALES@sykes-pickavant.com9 10
new andexclusive
€3756.00LIST PRICE: €3984.30
SAVE: €228.30
• Promotes efficient engine operation with a cleaner engine
• Hydrogen runs into the combustion engine’s air inlet system whilst running
• Portable machine - enables use away from the normal garage environment
• Low Voltage Operation - works off the vehicle’s battery at a safe low voltage when the engine is running
• Easy to use - no or little disassembly of the engine required
• Low maintenance - made in the UK
• Fixed HHO supply • Two year warranty
approx.10 minutes into operation approx. 30 minutes into operation after operation
Initial indication of carbon deposits being cleared; visible in exhaust smoke
As deposits burn off, exhaust smoke already begins to appear cleaner
Internal build up is expelled leaving the vehicle with a cleaner engine
MADE IN THE UK
53400300
SPECIAL INTRODUCTORY PRICETWO YEAR WARRANTY
WATCH THE VIDEO HERE!
www.sykes-pickavant.com 01543 67990011
hgv
®
Motorq Heavy Duty Torque WrenchES - break back style
‘Motorq 400’ - 3/4” Push-Thru Heavy Duty Torque Wrench
‘Motorq 500’ - 3/4” Push-Thru Heavy Duty Torque Wrench
‘Motorq 550’ - Stepped 3/4” to 1” Heavy Duty Torque Wrench
‘Motorq 340’ - 1/2” Push-Thru Heavy Duty Torque Wrench
‘Motorq’ Heavy Duty Torque Multiplier 1” Impact Wrench - long anvil
150 - 700 Nm
80 - 340 Nm
300 - 1000 Nm
300 - 1000 Nm
only 6.8kg
UP TO 3100nM
• 3/4” push-thru sq dr
• Length: 1150mm
• 1/2” push-thru sq dr
• Length: 783.5mm
• 3/4” push-thru sq dr
• Length: 1475mm
• 1” Sq. Dr (uses ¾” to 1” stepped convertor)
• 700 - 1500 Nm / 500 - 1000lbs.ft
• Length: 1475mm
• 150 - 700 Nm / 100 - 500lbs.ft
• Weight: 6.30kg
• 80 - 340 Nm / 60 - 250lbs.ft
• Weight: 3.00kg
• 300 - 1000 Nm / 200 - 750lbs.ft
• Weight: 7.30kg
• Weight: 10.40kg
80040000
80050000
80055000
80134500
80065500 90204500
• Single stage epicyclic gears, producing a 5 : 1 multiplication ratio
• Use with conventional torque wrenches for heavy duty applications
• Supplied with reaction bars, in plastic storage case
• After-sales service available
• Input Drive: 3/4” sq dr / 36mm hex
• Max Input: 540 Nm
• Output Drive: 1”
• Powerful twin hammer mechanism
• 4 step power control
• Smart design and ergonomically designed handle
• Single-switch can be changed for easy forward or reverse operation
• Easily adjustable torque regulator
• Can be configured for right and left handed use
• Lightweight magnesium composite housing
• 190mm long anvil• Max Output: 2700 Nm
• Weight: 4:5
MADE IN THE UK
€489.00
€502.00
€752.00
€801.00
€895.00
€313.50LIST PRICE: €372.21
SAVE: €58.71
SALES@sykes-pickavant.com11 12
hgv
Note: Full application details can be found on our website: www.sykes-pickavant.com
66193200 66198100 66198200
XL Cooling System Pressure Test Kit
HGV SPLIT BUSH KIT - master
Wheel Hub Grinder 90mm HGV wheel stud grinder - alu body
HGV HUB PULLER KIT
Ball Joint Separator - HGV
12 Tonne Hydraulic Ball Joint Separator
BESTSELLER
1 Holder + 1 Disc
90mm NEW
available 1st july
2pc.
5pc. 5pc.
331400V2
18797000
66193000 66198000
08070000
180700V2
Applications Include: Bova, Case, Caterpillar, County, DAF, Dart, David Brown, Denis, Deutz-Fahr, ERF, Fendt, Ford, Iveco, JCB, John Deere, Komatsu, Leyland Marshall, MAN, Massey Ferguson, Mercedes-Benz, Neoplan, New Holland, Optare, Renault, Scania, Volvo construction and agricultural vehicles
Includes:
• Metal bodied hand pump with pressure dual gauge & quick-release fitting
• Hose Assembly c/w quick-release fitting
• 10 x Reservoir & Radiator pressure caps
Universal wheel HUB extractor
• Variable for pitch circle diameter up to 300mm
• To suit wheel stud sizes commonly found on DAF, MAN, MERC & RENAULT models
• Contains 5 x thread adaptor pairs;
- M18 x P1.5 x 65mm/L
- M20 x P1.5 x 65mm/L
- M22 x P.15 x 65mm/L
- M24 x P.15 x 65mm/L
- M30 x P.15 x 65mm/L
• Strengthened fork and lever, allows for greater force to be applied
• Jaw opening capacity 70mm, jaw width 36mm
Updated kit now uses power from the SP 12 tonne hydraulic ram
• Hydraulic version of the 08070000 HGV Ball Joint Separator
Specification:
• Jaw Opening: 70mm
• Jaw Throat Width: 36mm
• Jaw Throat Depth: 50mm
For the removal and installation of split / spring eye bushes on HGV vehicles
• Uses a unique clamping system and a series of shells for a range of bush sizes from 56mm Dia to 75mm Dia.
• When used with a hydraulic pump (20017000) the kit allows the operator to work in a limited access environment and so reduce the amount of disassembly work required
ApplicationsShell 1 (75mm) - Mercedes Benz Shell 2 (70mm) - MANShell 3 (68mm) - MAN Front SpringShell 4 (66mm) - IVECO Eurostar
Special grinder for cleaning the wheel centring device and the attachment face between the wheel and hub, removes stubborn corrosion residues quickly and easily (3 - 25 second processing time per hub)
• Grinding Diameter: 200mm
• Internal Diameter: 90mm
• Max. Speed: 1000rpm
2pc. spare discs for 66193000
5pc. standard spare discs for 66198000
5pc. rough spare discs for 66198000
Shell 5 (65mm) - Mercedes Benz Actros, AtegoShell 6 (63mm) - DAFShell 7 (60mm) - Mercedes Benz / IVECO EurostarShell 8 (58mm) - Mercedes Benz / Volvo Shell 9 (56mm) - IVECO Eurostar
Special Grinder used to clean the wheel rim contact surface, designed for vehicles with stud bolts - corrosion is quickly and easily removed
• 1 holder, 5 x 56mm standard discs & 5 x 56mm rough discs
€341.95€168.95
€877.00
€102.50
€127.95
€336.25
€512.00
€67.95 €32.95 €44.50
21027500
www.sykes-pickavant.com 01543 67990013
€569.00€329.00 €394.00
FLUID HANDLING
• For transportation and refuelling of AdBlue® equipped vehicles
• Ideal for car, van, light commercial, agricultural, construction and heavy commercial workshops
• Impact resistant polyethylene tank, UV stabilised and equipped with wheels suitable for easy transportation
• Horizontal filling operation • Vented filling plug
Designed to meet the requirements of the modern workshop as well as health & safety issues
• Remove / extract waste fluids or oil from an engine
• Works best at oil temp between 40-60° with suction speeds of up to 6 litres per minute
• Combined volume capacity of 90 litres (70L tank & 20L drain bowl)
• Working pressure 8-10 Bar
• Powered by compressed air
Applications:
• Retrieve fuel following a filling error or removal of tank sender unit, changing or checking the fuel gauge, rinsing the fuel tank during body work etc.
• Emptying via tank filler neck or fuel lines
PART NO. DESCRIPTION TYPE HOSE TANK EMPTYWEIGHT PRICE
36610100 AdBlue® Transport Tank - 68L Manual Pump
Plastic manual rotary pump with plastic manual nozzle
4m EPDM 11kg €478.75
36610500 AdBlue® Transport Tank - 68L 12v DC Pump
12v DC pump - 30L/Min with plastic manual nozzle
4m EPDM 16kg €712.50
36611000 AdBlue® Transport Tank - 110L 12v DC Pump
12v DC pump - 30L/Min with “Piusi” digital nozzle
3m EPDM 12kg €1249.00
PNEUMATIC OIL EXTRACTORPNEUMATIC OIL EXTRACTOR WITH 9 LITRE INSPECTION CHAMBER
IDEAL FOR VEHICLES WITHOUT A SUMP PLUG
Both Include:
• Adaptors for BMW, Mercedes, VW and Citroen
• 4 x 700mm nylon tube probes with internal spring steel anti-kink wires
• 2 x 700mm steel probes
53390500 Includes:
• Inspection chamber to ensure the suction feature is working correctly
• Anti-splash device
36600500
WARNING: Do not use with corrosive or flammable products
5339050053390000
ADBLUE TRANSPORTATION TANKS
Fuel Extractor / Retriever Pneumatic Oil Extractors
® AVAILABLE IN 68L & 110L TANK SIZES
stainless steel 45l tank
Standard model also available - part number 35081000
premium atf machine
product of the year 2018
• Automatic Operation - via control panel with large LCD colour screen
• Zero Cross-Contamination - cleans the circuit with just 1 litre of oil and prevents cross-contamination between different ATF oils
• Automatic Recirculation Function - prevents any over-pressure related damage
• Automatic ATF Temperature Measurement - allows for flushing to start automatically when oil conditions are ideal
• Automatic Flow Direction - provided by the pressure sensors
• Pumps Flow-Rate Control - adapts the flushing speed to the transmission characteristics
• Fully Automatic Operation - via in-built updatable vehicle database
• Instructional Database - provides complete instructions for ATF flushing operation; oil grade, capacity, service points, connections & adaptor information
• Twin Pump Machine - for faster flushing control even on tricky transmissions
• Dedicated New Oil Tanks - can easily be interchanged with quick change coupler
• Dipstick Function Feature and Probe - allows oil changing via dipstick tubes where service can only be done through the oil refill hole as well as power steering fluid change
• Boost Function - speeds up used ATF discharge in case of transmission equipped with low flow-rate pump
• Printer and Additive Cannister - provided as standard
€3757.00PREMIUM ATF MACHINE
REQUIRES ADAPTOR KIT
350820SP
Applications Include:
Volvo, PSA Group, Renault, Jeep, Mitsubishi, GM, Suzuki, Toyota, Saab, Mercedes, Ssangyong, Audi, VW, BMW,
Jaguar, Nissan, Daihatsu, Suzuki, Fiat, Lancia, Ford, Porsche, Alfa Romeo, Cadillac, Land Rover, Chrysler*
Applications Include: GM, Fiat, Ford, Jeep, Chrysler, Saab, Mercedes, BMW, Jaguar, Volvo, Land Rover, VW, Rover, Opel, Alfa Romeo*
ADAPTOR KIT 2
ADAPTOR KIT 1
*Model restrictions apply, see website for full application list
See website for options35083100
35083000
adaptors also available separately
€679.00
€679.00
new PRINTER & built in database INCLUDED
SALES@sykes-pickavant.com13 14
€169.00
€226.95 €101.50
€238.00 €215.00
air tools
1/4” - 3/4” available
1/4”3/8” 1/2” 1/2” 3/4”
PART NO. IMAGE LENGTH DIAMETER PRICE
902135-01 40mm 3mm €61.50
902135-02 33mm 3mm / Sphere - 4mm €62.50
902135-03 40mm 3mm €61.50
902135-04 40mm 3mm €61.50
902135-05 40mm 3mm €61.50
902130SP90213500
90215000 90220000
90210000
9020200090201300 9020100090202500
90203500
IMPACT WRENCHES
RUBBER BOOTS
MICRO DIE GRINDER BIT SET (5 PACK)
ALSO AVAILABLE - PACKS OF 3
HELPS PROTECT IMPACT WRENCH FROM ACCIDENTAL DAMAGE
IDEAL FOR CUTTING SEIZED COMPONENTS, EXHAUST FITTINGS & LOCKING WHEEL NUTS
COMBINED DEAL - MICRO DIE GRINDER & BIT SET
AIR TOOL SERVICE & LUBRICATION KIT
UNIVERSAL AIR SWIVEL JOINT INLET
SIGNAL HOSE - 10MM (3/8”)FEATURES INTERNAL MEMBRANE
ONLY 3.2KG
COMPACT SIZE
7 VANES FOR EXTRA POWER
7 VANES FOR EXTRA POWER
LOW AIR CONSUMPTION
ULTRA SHORTBODY
UP TO 2600NMUP TO 1600NMUP TO 680NMUP TO 90NM UP TO 680NM
special offer
• Smart design and ergonomically designed handle
• Single-switch can be changed for easy forward or reverse operation
• Easily adjustable torque regulator
The latest generation mini composite device for small / fine grinding and milling - Includes 90213000 Micro Die Grinder & 90213500 5 pc. Bit Set
• Ideal for use in confined spaces
• Provides perfect handling due to the ‘Bionigrip’ surface
• Minimal vibration and low noise
• Powerful mini device for small / fine grinding & milling
• 1/8” drive / 70,000 rpm
• Abrasion resistant outer cover
• Internal membrane prevents kinking & hardening
• High-visibilty hose to reduce trip hazard
• Working temp range: -40°c to +65°c
• Working pressure: 300psi• Break pressure: 1000psi
• Length: 10 metres
• For use with Micro Die Grinder (90213000)
• Contains five shaped ends suitable for precision work
• Can be configured for right and left handed use
• Lightweight magnesium composite housing
• 3 step power control
For servicing air toolsIncludes:
• 1 x bottle of air tool oil
• 1 x tube of air tool grease
• Applicator nozzle
• Grease press
• 2 x 360° rotation
• Industrial quality
• Heat treated connecting screw
+
*Impact wrench not included
N.B. Hose supplied without fittings
€22.75
€39.95
€24.95
€249.00 €599.00
90201100
90202100
90201600
FOR USE WITH 90201000
FOR USE WITH 90202000
FOR USE WITH 90201500& 90202500
€21.95
€18.50
€23.95
www.sykes-pickavant.com 01543 67990015
WHEELS
75mm
40mm 60mm
inner rim cleaner
wheel stud grinder - alu body
special offeralso available
++
66195500 INNER RIM CLEANER + WHEEL HUB GRINDING ATTACHMENT PACK
SPARE DISC PACKS ALSO AVAILABLE
661922SP
661927SPFor the optimal cleaning of the inner wheel contact surface
• 160mm diameter
• Prevents corrosion related distortion of wheel bolt tightening torque
• Completely removes burnt in corrosion
• To be used only on the inside of an aluminium rim, particularly the inner area prior to wheel balancing
• The porous abrasives and cup shaped grinding plate ensures minimal dust
• Discs are attached with velcro, making them easy to replace
• Optimized for the latest wheel rims with an internal diameter of 75mm
Special Grinder used to clean the wheel rim contact surface, designed for vehicles with stud bolts - corrosion is quickly and easily removed
• 1 holder, 6 x 60mm discs & 5 x 40mm discs supplied
5pc. 40mm spare discs for 66194000 5pc. 60mm spare discs for 66194000
For cleaning the wheel centring device and the attachment face between the wheel and hub, removes stubborn corrosion residues quickly and easily (3 - 25 second processing time per hub)
5pc. 5pc.
60mm
3pc.
BESTSELLER66194000
66195500
66194200 66194300
€79.95
€30.75 €33.00
75mmideal for bmw
3pc.
€120.75
€121.95
LIST PRICE: €128.71
LIST PRICE: €129.85
SAVE: €7.96
SAVE: €7.90
€62.95
Universal tool for the removal of unwanted build ups
• Double edged blade gives you the ability to use the tool on both sides as a push or pull tool
• Ergonomically designed to fit comfortably in your hand
• High quality carbide tips give the tool a longer lifespan
• Versatile tool with many uses
• Aids with the removal of rear cluster lights
• Can be used for removing stuck wheel weights or trim
• Ideal for removing door panels
• Ergonomic edge
• 3 sided blade
• MOT approved gauge complete with pocket clip
• Measures 0 – 26mm in 1mm increments
• Inc. 1.6mm depth measurement for MOT regulations
For use on gaskets, corrosion on brakes, paint and glue in hard to reach areas and carbon on the exhaust manifold
€80.50 €11.50
67000200 0328000068010100CARBIDE SCRAPER KIT TYRE TREAD DEPTH GAUGEUNIVERSAL TRIM TOOL
€7.40
SALES@sykes-pickavant.com15 16
hurry! limited stock available
MECHANICS VICE - FIXED BASE
RETRACTABLE HOSE REELS
SYKES-PICKAVANT EXCLUSIVE OFFER
SWIVEL BASE FOR MECHANICS VICE
• High quality, heavy duty construction provides years of trouble free use
• CNC machined components for excellent fit and durability
• Hardened and tempered finely ground jaws for superior grip
• Scratch resistant hammered blue finish
• Replacement parts available including jaws and handle
• Spring driven retractable hose reel c/w wall mounting brackets
• Polypropylene case
• Suitable for compressed air or cold water up to 17 bar working pressure
• Heavy duty rubber air / water hose to ISO EN 2398 standard
• Allows 360° rotation of Mechanics Vice for better access
• Lockable to most convenient angle
• Compatible with Mechanics Vice
BESTSELLER
341300SP861002SP1
*Excluding jaws & handle
PART NO. SIZE(INCH)
JAW WIDTH(MM)
JAW OPENING(MM)
THROAT DEPTH(MM) PRICE
53320400 4” 102 132 74 €77.50
53320600 6” 153 206 95 €129.50
53320800 8” 203 225 105 €175.00
PART NO. COMPATIBLE VICE PRICE
533204-B 53320400 €10.95
533206-B 53320600 €17.95
533208-B 53320800 €20.95
PART NO. SIZE CONNECTION LIST PRICE OFFER PRICE
53399000 20m x 10mm 3/8” €319.14 €249.00
53399100 18m x 12mm 1/2” €319.14 €249.00
PART NO. SIZE CONNECTION LIST PRICE OFFER PRICE
53399600 9m x 8mm 1/4” €120.78 €95.00
53399700 15m x 10mm 1/4” €120.78 €110.00
GUARANTEED Unbreakable*
AIR/WATER AIR only
NEW
NEW
• Compact design
• PVC hose
• 180 degree pivoting wall bracket
• Polypropylene case
• Brass swivel assembly
• 53399600 - Suitable for compressed air up to 10 bar working pressure
• 53399700 - Suitable for compressed air up to 20 bar working pressure
• 12v 1300 amp lightweight, compact & powerful Ultracapacitor Booster Pack with backup lithium battery
• Easy & Quick Recharge: hybrid technology allows booster to be charged from the vehicle’s battery or if highly discharged the backup lithium battery can be used instead, this takes 1 - 4 minutes depending on method used
• 10,000 Cycles / 10 Year Life Span
• Operating Temperature Range: -40°C +65°C
• Override Mode to start engine without any battery mounted
• Glow Mode for cold start of diesel engine
• Protection against short-circuits and reverse polarity
• Digital display shows capacitor charging level and vehicle’s battery voltage
• Rotomolded case with lifetime warranty
• Fully insulated Heavy-Duty curved clamps
WORKSHOP TOOLS
€449.00
€439.00INCLUDES FREE ACCU-SMART WORTH €60.36INCLUDES LIFETIME CASE WARRANTY & 2 YEAR BATTERY WARRANTY
+Pro-Start 800 Booster Pack with Free 12v 4 Amp Accu-Smart Battery Charger
• 12v Pro-Start 800 Booster Pack with 800 cranking amps and 2370 peak amps
• AGM internal batteries
• Double insulated starting cables – 1.30/1.35 mtrs length
• Illuminated voltmeter indicates booster charge level, booster and alternator function
• Curved jaw clamps, fully insulated
• Single-piece, shock resistant, moulded case
896124SP - Accu-Smart 12v 4 Amps Battery Charger
• Suitable for Wet (Lead Acid), AGM, Gel & Fleece type batteries
TWO YEAR WARRANTY
HYBRID ULTRACAPACITOR BATTERY BOOSTER
www.sykes-pickavant.com 01543 67990017
• One man operation for brake & clutch bleeding
• Auto power OFF when min level reached
• Includes aluminium SP Euro cap - angled screw type
• Reverse polarity warning
• Stainless steel body
• Pump c/w auto shut off valve
• 5L reservoir / 4m cable
• 0 to 6 bar
• ABS compatible
343001V2
02725000
660926SP
02729500
34400500
€797.00
Braking
12v Automatic Brake Bleeder
BRAKE PIPE FLARING TOOLS - Combined DEAL
Flaremaster2 Brake Pipe Flaring Kit - 4.75mm
Flaremaster2 - Brake Pipe Flaring Tool
240v Electric Brake Bleeder
The Original Hand Held Automotive Brake Pipe Flaring Tool
• Quick-release chuck for positive engagement of the punch
• Fast-turn coarse thread on hydraulic ram, for quick assembly
• Locking bolt with swivel pin, for fast tightening
• Inter-changeable dies, held in place by magnets
• Enhanced bridge unit for greater strength
• Re-designed, ergonomic, handle moulding, for greater comfort
• Creates SAE & DIN single and double flares (4.75mm & 3/16” pipe)
• Adjustable for pipe diameters: 3-16mm (1/8”-5/8”)
• Allows protective nylon coating (seen in particular VAG and GM models) to be removed prior to flaring the brake pipe
• Prevents ‘bad flares’ which occur when brake pipe is flared with coating on which can lead to leakage
• Enables pipe to be flared without puncturing plastic coating
• New textured design allows coated brake pipe to be easily gripped
Flaremaster2 - Kit with Compatible ToolsIncludes:
• 02725000 - Flaremaster2
• 02160000 - Brake Pipe Aid Plier
• 02210000 - Telescopic Pipe Tube Cutter: 3-32mm
• 02730000 - Pipe Deburring Tool: 3.2-16mm
• One man operation for brake & clutch bleeding
• Impact resistant housing
• Long supply hose (3.2m) allows for use with vehicle raised on a ramp
• Includes aluminium SP Euro cap - angled screw type
• Weight: 10kg
• 0 to 6 bar
• ABS compatible
NEW
+WITHOUT USING TOOL USING TOOL
02720300
BEFORE AFTER
BRAKE PIPE COATING REMOVAL TOOLCOATED BRAKE PIPE DIES
GRIP TEXTURE
€598.00
€159.95
€193.95
€45.50
LIST PRICE: €192.66
LIST PRICE: €232.56
LIST PRICE: €56.89
SAVE: €32.71
SAVE: €38.61
SAVE: €11.39
special offer
IN SITU SOLUTION
SALES@sykes-pickavant.com17 18
03614000
Braking
Brake Caliper Cleaning Files
‘270’ Series Brake Pipe Flaring Tools Speed, Accuracy and Reliability
Air Assisted Caliper Piston Wind Back Tool Kit
03620100
03620200
02700100
66092500 02340000
0273000002160000
02700800
02700900
Scraping file for removal of course residue on brake calipers
• Special scraping surface saves time and is more effective than standard files because the coarse tooth design will not clog
• Air operated ram applies pressure to the caliper piston, while the handle is rotated by hand
• Easy to use – works on standard workshop air supply
• Reversible – works on both RH and LH applications
• Can be used on Wind Back and Push Back pistons
• Supplied with nine adaptors which cover a wide range of popular vehicles (applications list included)
• Also supplied with 3/8” converter to use with adaptors from manual kit (03619200)
• Metric & imperial pipe sizes
• From 3/16” to 1/2”
• From 4.75mm to 12mm
• Produces both Convex and Double Lap flares to SAE and DIN standards
• Unique ‘ Dial-a-Size’ Turret design
• Lever cam operation for quick flaring
• Automatic punch extraction from flare
• Screw clamp for accurate die alignment
• Variety of kits available to suit requirements
• All components available individually
Suitable for brake pipe sizes:
• SAE Single & Double Lap flares - 3/16” & 4.75mm
Suitable for brake pipe sizes:
• SAE Single and Double flares - 3/16, 1/4, 5/16, 3/8, 1/2”, 4.75, 6, 8, 10, 12mm
• DIN Single flares - 4.75mm
Suitable for brake pipe sizes:
• SAE Single and Double flares - 3/16, 1/4”, 4.75, 6mm
• DIN Single flares - 4.75mm
• One-hand operation, ideal for on-the-vehicle working
• Suitable for use on pipes from 3 - 25mm
• For forming tight bends in brake and clutch pipes
• Ideal for use in restricted space and for use on-the-vehicle
• Can also be used for quick tube nut thread alignment and as a guide when cutting tube
• For 3/16” or 4.75mm pipe
• Essential tool when preparing to flare copper brake pipe, to avoid the risk of swarf in the pipe
• Double ended tool for the deburring of Brake & Fuel Pipes when preparing ends for use
• Works on all types of copper, steel and brass pipes
• Pipe Sizes: 1/8” (3.2mm) to 5/8” (16mm)
• This tool has been especially designed to allow the user to inspect brake pipes for corrosion, both quickly and easily
• It features two scraper areas on the head of the tool, which allows the user to remove dirt and corrosion from the pipes, and thereby be able to effectively examine the condition of the pipes
MINI PIPE TUBE CUTTER 3 - 25MM BRAKE PIPE CORROSION TOOL
PIPE DEBURRING TOOL - 3.2-16MMBRAKE PIPE AID PLIERS
SPECIAL EXTRA SLIM MODEL FOR JAPANESE VEHICLES
BRAKE PIPE FLARING KIT
BRAKE PIPE FLARING KIT
BRAKE PIPE FLARING KIT
€188.00
€102.50
€217.00
€299.00
€36.50
€17.95
€29.95
€33.95
€8.50
€9.50
LIST PRICE: €226.86
LIST PRICE: €119.64
LIST PRICE: €262.20
LIST PRICE: €376.20
LIST PRICE: €44.40
LIST PRICE: €21.60
LIST PRICE: €36.42
LIST PRICE: €42.12
LIST PRICE: €10.20
LIST PRICE: €11.39
SAVE: €38.86
SAVE: €17.14
SAVE: €45.20
SAVE: €77.20
SAVE: €7.90
SAVE: €3.65
SAVE: €6.47
SAVE: €8.17
SAVE: €1.70
SAVE: €1.89
Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United KingdomTel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: sales@sykes-pickavant.com www.sykes-pickavant.comALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OEPRICES VALID UNTIL 31ST AUGUST 2018 - REF: SP218EUR COPYRIGHT 2018 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED
Distributor Stamp:www.sykes-pickavant.com 01543 679900
€74.95
€53.50
pullers
Slide Hammers & Split Collet Extractors
fast fit MICRO PULLER
mechanical Twin/Triple Leg Puller Kit Hydraulic Twin/Triple Leg Puller Kit
4 WAY MINI PULLER
09580000
09580300 09580400
09580100
• Extract components quickly and efficiently when conventional pullers cannot be used
• Removes bearings, oil seals etc.
6.5 -12mm
4 tonne 8 tonne
12-30mm
8.5 -22mm30-60mm
6.5 -60mm
09580200
FIND OUT MORE HERE!
08215000
14500300 15500300
08245000
• For removing gears, races, bearings and sprockets on automotive / industrial applications
• Makes 3 different twin/triple leg pullers
• Spread: 75 - 150mm
• Reach: 150mm
• Supplied in cardboard box
• Also available in metal case as p/n 15500000
• For removing gears, races, bearings and sprockets on automotive / industrial applications
• Makes 3 different twin/triple leg pullers
• Spread: 50 - 150mm
• Reach: 150mm
• Supplied in cardboard box
• For rapid removal of small bearings
• Covers a wide range of automotive and engineering applications including: alternators/generators, domestic appliances, power tools and pumps
• Self-centring force screw with ‘T’ bar and 13mm hexagon drive
• Drop forged legs with independent leaf springs
• Securing collar tightens under load for positive, non slip pulling action
• Suitable for ISO referenced bearings
• 1 tonne capacity
• Ideal for windscreen wiper arms
• Unique 4 way design allows for 4 different jaw widths to be selected
• Reversible and interchangeable legs
• Removable centrepiece for wider application coverage
• Capacity from 19-36mm
€130.95
€296.50
€169.95
€554.95
€202.95
€242.95€197.95
MADE IN THE UK