Post on 04-Aug-2018
transcript
Specification Sheet / In-grade / L300
All technical information in this document is subject to change. Copyright © MP Lighting.www.mplighting.com t 1.877.708.1184 f 604.708.1185 12-2017
Code Wattage Color Beam Lens (Option) Angle Bracket* Input Voltage Flange Height Base Height Finish
L300 - -
1 = 1W 2 = 2.5W
W22S = 2200K, 80+CRI W27S = 2700K, 80+CRIW30S = 3000K, 80+CRIW35S = 3500K, 80+CRIW41S = 4100K, 80+CRIW27H = 2700K, 90+CRIW30H = 3000K, 90+CRIW35H = 3500K, 90+CRI
S = spot (12°)N = narrow flood
(30°)W= wide flood
(120°)
C = clearF = frosted
See below
(Option)LM = louver, matte anodizedLB = louver, black anodizedHM = hex louver, matte anodizedHB = hex louver, black anodized* Louver cannot be used with Angle Bracket.
0 = no angle 20 = 20° angle X = custom
(20° max.)
* Max. 20° angle bracket without louver option.
D = DCA = 12V AC*12V AC not available for W22S/W41S & 90+CRI
S = standard flange/box, 2-7/8” (73mm)
P = paving stone flange/box, 5-1/2” (140mm)
0 = no base2 = 2” (51mm)6 = 6” (152mm)
MA = matte clear anodizedBA = black anodizedBZ= bronze anodizedS6 = stainless steel 316
Type:
Project:
Modified:
Quantity:
Notes:
L300Application Exterior/interior directional in-grade luminaire for lighting
walls, columns, architectural features or landscape features. Applicable for mounting into floors, walls, ceilings or other surfaces where a non-obtrusive luminaire is required. Suitable for drive-over and walk-over applications. For wet/dry locations.Recommended Projects - Commercial, Institutional, Retail, Clinic, Hospitality, Religious, Educational, Architecture
IP Rating 66
Mounting Comes with splice box, aluminum flange and level gauge. Can be buried in earth/gravel or cast into concrete/paving stone with or without mounting base. Designed to be cast into concrete or inserted into paving stone. Includes 6” wire lead. Can be mounted with MK1 and MK2 (consult with factory). Can be used with Single Gang Box (not included, can be purchased directly from MP Factory. See page 2 & 3)
Electrical Powered by remote dimmable/ non-dimmable driver (sold separately).
*See website for recommended drivers *Remote emergency driver / inverter options available Consult factory.
Power Consumption
1.5 Watt (at 350 mA, 1.0 Watt)
3.0 Watt (at 700 mA, 2.5 Watt)
Light Output 1.0 Watt, 29~33lm2.5 Watt, 47~53lm*For photometric data, see page 03
Warranty 5 years limited warrantyEstimated useful life of LED is 50,000 hours.
Material Solid anodized aluminum or stainless steel (316) with tempered glass lens, RoHS compliant.
Drive Over Rating
2200kg/4850lbs
Weight 1.8lbs (0.816kg) base extra
Approval
Order Guide
Example: L300-1-W22S-N-C-LM-0-D-S-0-S6
**please go to page 2 & 3 for more info on custom boxes
DISCLAIMER - When using a control system, consult dimming system manufacturer with minimum load before installing 12V AC transformer. Malfunction and damage to product due to improper dimming system installation or misuse will not be covered under warranty. Only DC Drivers are recommended for dimming systems. Consult MP Lighting for recommended drivers.
*MP Lighting reserves the right, at its sole discretion, at any time and without notice, to make design changes to any of our products.
Specification Sheet / In-grade / L300
All technical information in this document is subject to change. Copyright © MP Lighting. 12-2017www.mplighting.com t 1.877.708.1184 f 604.708.1185
pavingstone
sand
Paving stoneflange3-5/8” (92mm)5-1/2”
140mm
Shown with standard flange (S)
Wall mount
Base Height
Ø1-5/8”Ø41mm
Ø4-1/8”Ø105mm
1/4”6mm
2”51mm
Standard flange7/8” (22mm)
Ø2-1/2”Ø64mm
Concrete pouring line
4-7/8”124mm
2-3/4”70mm
Splice box with 1/2 NPT I/O ports for connector and wiring.
1-1/4”32mm
1/4”6mm
2”51mm
Ø2-1/2”Ø64mm
Concrete pouring line
1-1/4”32mm
Ø6-1/2”Ø165mm
Ø1-7/8”Ø49mm
2-7/8”72mm
Base Height
Ø6-1/2”Ø165mm
Base Height
Ø1-5/8”Ø41mm
Ø4-1/8”Ø105mm
1/4”6mm
2”51mm
Standard flange7/8” (22mm)
Ø2-1/2”Ø64mm
Concrete pouring line
4-7/8”124mm
2-3/4”70mm
Splice box with 1/2 NPT I/O ports for connector and wiring.
1-1/4”32mm
1/4”6mm
2”51mm
Ø2-1/2”Ø64mm
Concrete pouring line
1-1/4”32mm
Ø6-1/2”Ø165mm
Ø1-7/8”Ø49mm
2-7/8”72mm
Base Height
Ø6-1/2”Ø165mm
pavingstone
sand
Paving stoneflange3-3/8” (86mm)5-1/2”
140mm
Base Height
Ø1-5/8”Ø41mm
1/4”6mm
Standard flange7/8” (22mm)
3/4” NPT
Ø2-3/16”Ø56mm
Concrete pouring line
Concrete
4-7/8”124mm
2-7/8”72mm
Ø4-1/8”Ø105mm
1-13/16”45.6mm
Tile
Ø1-5/8”Ø41mm
1-3/4”45.6mm
3/4” NPT
Ø2-3/16”Ø56mm
trim 1/8”
4-7/8”124mm
3”76mm
Ø4-1/8”Ø105mm
please pour concreteapprox. 6mm abovetop of flange
Base Height
Base Height
Ø6-1/2”Ø165mm
Shown with EBX1-LED01-OCLA and MK2 Mounting kit
Standard flange with standard base Shown with paving stone flange (P) with no base.
DIMENSION:
sand
Base Height
Ø4-1/8”Ø105mm
1/4”6mm
2”51mm
Standard flange7/8” (22mm)
Ø2-1/2”Ø64mm
Ø1-5/8”Ø41mm
Concrete pouring line
4-7/8”124mm
2-3/4”70mm
Splice box with 1/2 NPT I/O ports for connector and wiring.
pavingstone
Paving stoneflange3-3/8”86mm
5-1/2”140mm sand
Base Height
Ø4-1/8”Ø105mm
1/4”6mm
2”51mm
Standard flange7/8” (22mm)
Ø2-1/2”Ø64mm
Ø1-5/8”Ø41mm
Concrete pouring line
4-7/8”124mm
2-3/4”70mm
Splice box with 1/2 NPT I/O ports for connector and wiring.
pavingstone
Paving stoneflange3-3/8”86mm
5-1/2”140mm
CUSTOM RECTANGULAR BOXES ORDER GUIDE:
A-A ( 1 : 4 )
A
A
70 mm2 3/4 in
116
mm
4 1/
2 in
83 m
m3
1/4
in
107
mm
4 1/
4 in
74 m
m2
7/8
in
66 mm2 5/8 in
49 mm1 7/8 in
111 mm4 3/8 in
83 mm3 1/4 in
116 mm4 1/2 in
A-A ( 1 : 4 )
A
A
70 mm2 3/4 in
116
mm
4 1/
2 in
83 m
m3
1/4
in
107
mm
4 1/
4 in
74 m
m2
7/8
in
66 mm2 5/8 in
49 mm1 7/8 in
111 mm4 3/8 in
83 mm3 1/4 in
116 mm4 1/2 in
A-A ( 1 : 4 )
A
A
70 mm2 3/4 in
116
mm
4 1/
2 in
83 m
m3
1/4
in
107
mm
4 1/
4 in
74 m
m2
7/8
in
66 mm2 5/8 in
49 mm1 7/8 in
111 mm4 3/8 in
83 mm3 1/4 in
116 mm4 1/2 in
Code Custom Flange + Box
EBX - L01
SGB1= MPLIGHTING Single gang box, 4-1/4”(107mm)SGB= Single gang box Iberville BCMBD1-K, 4-3/4”(122mm)SFD= Scepter FD, 4-1/4”(107mm)
Single Gang Box 1 (SGB1-MAO & SGB1-SS0)*Please contact and consult with MP Factory to purchase.
Specification Sheet / In-grade / L300
All technical information in this document is subject to change. Copyright © MP Lighting. 12-2017www.mplighting.com t 1.877.708.1184 f 604.708.1185
12° (Spot Beam), Clear lens, Matte clear anodized
30° (Narrow Flood Beam), Clear lens, Matte clear anodized
120° (Wide Flood Beam), Clear lens, Matte clear anodized
1Watt
LIGHT DISTRIBUTION:
A-A ( 1 : 4 )
A
A
83 mm3 1/4 in
116 mm4 1/2 in
133 mm5 1/4 in
107 mm4 1/4 in 74 mm
2 7/8 in
6 mm1/4 in
70 mm2 3/4 in
49 mm1 7/8 in
49 mm1 7/8 in
83 mm3 1/4 in
133 mm5 1/4 in
116 mm4 1/2 in
107 mm4 1/4 in 74 mm
2 7/8 in
70 mm2 3/4 in
A-A ( 1 : 4 )
A
A
83 mm3 1/4 in
116 mm4 1/2 in
133 mm5 1/4 in
107 mm4 1/4 in 74 mm
2 7/8 in
6 mm1/4 in
70 mm2 3/4 in
49 mm1 7/8 in
49 mm1 7/8 in
83 mm3 1/4 in
133 mm5 1/4 in
116 mm4 1/2 in
107 mm4 1/4 in 74 mm
2 7/8 in
70 mm2 3/4 in
A-A ( 1 : 4 )
A
A
83 mm3 1/4 in
116 mm4 1/2 in
133 mm5 1/4 in
107 mm4 1/4 in 74 mm
2 7/8 in
6 mm1/4 in
70 mm2 3/4 in
49 mm1 7/8 in
49 mm1 7/8 in
83 mm3 1/4 in
133 mm5 1/4 in
116 mm4 1/2 in
107 mm4 1/4 in 74 mm
2 7/8 in
70 mm2 3/4 in
D-D ( 1 : 4 )
D
D
116
mm
4 1/
2 in
83 m
m3
1/4
in
70 mm2 3/4 in
122
mm
4 3/
4 in
89 m
m3
1/2
in
51 mm2 in
49 mm1 7/8 in
51 mm2 in
122
mm
4 3/
4 in
89 m
m3
1/2
in
49 mm1 7/8 in
83 mm3 1/4 in
116 mm4 1/2 in
95 mm3 3/4 in
D-D ( 1 : 4 )
D
D
116
mm
4 1/
2 in
83 m
m3
1/4
in
70 mm2 3/4 in
122
mm
4 3/
4 in
89 m
m3
1/2
in51 mm2 in
49 mm1 7/8 in
51 mm2 in
122
mm
4 3/
4 in
89 m
m3
1/2
in
49 mm1 7/8 in
83 mm3 1/4 in
116 mm4 1/2 in
95 mm3 3/4 in
D-D ( 1 : 4 )
D
D
116
mm
4 1/
2 in
83 m
m3
1/4
in
70 mm2 3/4 in
122
mm
4 3/
4 in
89 m
m3
1/2
in
51 mm2 in
49 mm1 7/8 in
51 mm2 in
122
mm
4 3/
4 in
89 m
m3
1/2
in
49 mm1 7/8 in
83 mm3 1/4 in
116 mm4 1/2 in
95 mm3 3/4 in
Single Gang Box (Iberville BCMBD1-K)
Scepter Box (Scepter FD)
Specification Sheet / In-grade / L300
All technical information in this document is subject to change. Copyright © MP Lighting. 12-2017www.mplighting.com t 1.877.708.1184 f 604.708.1185
PHOTOMETRIC DATA:
1W, 3000K, Clear lens 2.5W, 3000K, Clear lens
0° Spread: 21.6° 90° Spread: 20.1°
3.4’ (1.04m)
2.9’ (884m)
2.3’ (701mm)
1.7’ (518mm)
1.1’ (335mm)
0.6’ (183mm)
3.2’ (975mm)
2.7’ (823mm)
2.2’ (671mm)
1.6’ (487mm)
1.1’ (336mm)
0.5’ (152mm) 66.1
16.5
7.34
4.13
2.64
1.84
Center Beam FC Beam Width
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
approx. 166 cdmax.
0°
180°
90°
45°-45°
-90°
Polar Candela DistributionL30012°, 80+ CRISpot Beam3000K33 lm
Illuminance at a Distance
approx. 269 cdmax.
0°
180°
90°
45°-45°
-90°
Polar Candela DistributionL3002.5W, 80+ CRISpot Beam3000K53.2 lm
Illuminance at a Distance
0° Spread: 21.5° 90° Spread: 20.1°
3.4’ (1.04m)
2.9’ (884m)
2.3’ (701mm)
1.7’ (518mm)
1.1’ (335mm)
0.6’ (183mm)
3.2’ (975mm)
2.7’ (823mm)
2.2’ (671mm)
1.6’ (487mm)
1.1’ (336mm)
0.5’ (152mm) 107
26.8
11.9
6.71
4.29
2.98
Center Beam FC Beam Width
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
approx. 194 cdmax.
0°
180°
90°
45°-45°
-90°
Polar Candela DistributionL3002.5W, 80+ CRILinear Beam2700K52.4 lm
Illuminance at a Distance
0° Spread: 30.0° 90° Spread: 24.5°
4.8’ (1.46m)
4.0’ (1.22m)
3.2’ (975mm)
2.4’ (732mm)
1.6’ (487mm)
0.8’ (244mm)
3.8’ (1.16m)
3.2’ (975mm)
2.6’ (792mm)
1.9’ (579mm)
1.3’ (396mm)
0.6’ (183mm) 74.4
18.6
8.27
4.65
2.98
2.07
Center Beam FC Beam Width
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
approx. 42 cdmax.
0°
180°
90°
45°-45°
-90°
Polar Candela DistributionL3002.5W, 80+ CRIWide Beam3000K47.2 lm
Illuminance at a Distance
16.1’ (4.91m)
13.4’ (4.08m)
10.7’ (3.26m)
8.0’ (2.4mm)
5.4’ (1.65m)
2.7’ (823mm)
7.4’ (2.26mm)
6.1’ (1.86m)
4.9’ (1.49m)
3.7’ (1.13m)
2.5’ (762mm)
1.2’ (366mm) 9.90
2.47
1.10
0.62
0.40
0.27
0° Spread: 83.6° 90° Spread: 44.4°
Center Beam FC Beam Width
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
approx. 120 cdmax.
0°
180°
90°
45°-45°
-90°
0° Spread: 29.9° 90° Spread: 24.1°
4.8’ (1.46m)
4.0’ (1.22m)
3.2’ (975mm)
2.4’ (732mm)
1.6’ (487mm)
0.8’ (244mm)
3.8’ (1.16m)
3.2’ (975mm)
2.6’ (792mm)
1.9’ (579mm)
1.3’ (396mm)
0.6’ (183mm) 45
11.3
5.04
2.83
1.81
1.26
Center Beam FC Beam Width
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
Polar Candela DistributionL30030°, 80+ CRILinear Beam2700K33 lm
Illuminance at a Distance
approx. 26 cdmax.
0°
180°
90°
45°-45°
-90°
16.1’ (4.91m)
13.4’ (4.08m)
10.7’ (3.26m)
8.0’ (2.4mm)
5.4’ (1.65m)
2.7’ (823mm)
7.4’ (2.26mm)
6.1’ (1.86m)
4.9’ (1.49m)
3.7’ (1.13m)
2.5’ (762mm)
1.2’ (366mm) 6.13
1.53
0.68
0.38
0.25
0.17
Polar Candela DistributionL3000°, 80+ CRIWide Beam3000K29 lm
Illuminance at a Distance
0° Spread: 83.6° 90° Spread: 44.4°
Center Beam FC Beam Width
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
Lumen: 33lm, Spot beam (12°) Lumen: 53.2lm, Spot beam (12°)
Lumen: 33lm, Narrow flood beam (30°) Lumen: 52.4lm, Narrow flood beam (30°)
Lumen: 29lm, Wide beam (120°) Lumen: 47.2m,Wide beam (120°)
Polar Candela Distribution Polar Candela DistributionIlluminance at a Distance Illuminance at a Distance
12° (Spot Beam), Clear lens, Matte clear anodized
30° (Narrow Flood Beam), Clear lens, Matte clear anodized
120° (Wide Flood Beam), Clear lens, Matte clear anodized
2.5Watt