Post on 21-Mar-2016
description
transcript
Yesterday, 09:54 PM
madman146@gmail.com
Member
Member Geek
Join Date: May 2010
Posts: 75
Speedway DD just keeps getting worse WTF!
Thought mine (Black #003) was OK until a read another post about running the chrono 20 times
and guess what!
Started out OK but gradually stopped resetting at 12:00 moving forward 1 second, then 3
seconds off and now it's at 4 seconds off center.
If this is one of Invicta's "flagship" models it should really be called "FLAGS**T"
I'm really getting tired of sending Invicta's back and I'm done with this brand!
They really need to set their priorities and get their QC together now!
It's the watch nuts like us that "try" to be loyal but how many chances do they get!
Over and over, issues and issues ... enough already INVICTA!
UPDATE:
It's just keeps getting worse ... seems everytime I run the chrono it resets later, now at 22
secs!
Also when I try to manually wind the watch I hear a clicking sound
UPDATE 2: Just wanted to clear the "20 times" thing up.
I did not do it 20 times in a row over and over ... just over a period of approx 1 hour.
Would activate it, let it run for 15 - 45 secs and then reset. .. wait a little while then do it again.I
did not "torture" test the watch!
I own 28 Invicta watches and love their value and style however I expect a lot more when I
invest my hard earned money in what I consider an expensive watch. I went through the last DD
debacle and would have though Invicta would have been extra careful this time!
3 Lastest Threads by madman146@gmail.com
Thread Forum Last Poster Replie
s
View
s
Last
Post
Speedway
DD just
keeps getting
worse WTF!
General Invicta Watch Discussions
GeorgeTheWatchG
uy 304 5425
02-
17-
2011
09:5
4
PM
3 Lastest Threads by madman146@gmail.com
Lupah
SW500 -
screw in
crown?
General Invicta Watch Discussions TheJayBird 3 137
01-
26-
2011
11:4
0
AM
Sunday
Run -
"OVERSOL
D"
Invicta Announcements and Sunday
Run
BRS 104 1942
01-
20-
2011
10:0
7
AM
madman146@gmail.com
madman146@gmail.com
madman146@gmail.com
madman146@gmail.com
madman146@gmail.com
#2
Yesterday, 09:59 PM
jackievictor
Senior Member
Super Geek
Join Date: Jan 2009
Location: Upstate, NY
Posts: 2,349
Real Name: Victor
The flood gates are starting to open.
Madman,
I'm sorry to hear about Speedway DD issue.
That sucks.
Did you happen to take pics before you packed it up for return?
__________________
Victor
jackievictor
jackievictor
jackievictor
jackievictor
#3
Yesterday, 10:03 PM
w107kam
Senior Member
Senior Geek
Join Date: Feb 2010
Location: Cincinnati, OH
Posts: 154
Real Name: Kyle
Really? Nice avatar...
w107kam
w107kam
w107kam
w107kam
#4
Yesterday, 10:03 PM
sheraortho
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Carmel, IN
Posts: 8,449
Real Name: Brian
Damn I really sorry to hear about the problems! ya know, I've been gone for a while and I hoped
that during my absence, Invicta would have gotten their **** together with regards to their
quality and their QC! It's starting to look like nothing has changed. I hope it's not wide spread or
systemic because we'd be back to where we wee a few years ago when they had more problems
that anyone could count! Sorry to hear this but i hope things work out for you!
__________________
Renato, Marina Militare, Zodiac, Invicta, Hamilton, SeaPro, Orient, Wenger, Riedenschild,
Luminox, Swiss Legend, Seiko, Sector, Bulova, Gruen, ESQ, Tauchmeister, Vostok and Alpha
all have their place..... on my wrist!
BRIAN
sheraortho
sheraortho
sheraortho
sheraortho
#5
Yesterday, 10:05 PM
timeman
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Long Island, New York
Posts: 6,295
Real Name: Jerry
You would think after the problems with the original all the bugs would have been corrected.
__________________
timeman
timeman
timeman
timeman
#6
Yesterday, 10:09 PM
bkacher1063
Senior Member
Senior Geek
Join Date: Mar 2009
Location: Henderson, NV
Posts: 485
Real Name: Barry Anderson
Sorry to hear about the issues. So far mine has passed all of the tests.
bkacher1063
bkacher1063
bkacher1063
bkacher1063
#7
Yesterday, 10:09 PM
mdhorner
Senior Member
Master WatchGeek
Join Date: Oct 2009
Location: Chicago, IL
Posts: 3,185
Real Name: Michael
surprised to see quite the number of defective ones after the first debacle. Mine is so far perfect.
sorry to hear of your troubles. I completely understand that you're done with Invicta though. Not
sure how this can be justified over and over again.
__________________
A flush always beats a straight unless the guy with the straight
carries a gun. -Norman Chad
mdhorner
mdhorner
mdhorner
mdhorner
#8
Yesterday, 10:10 PM
NCEngineer
Senior
Member
Senior Geek
Join Date: Jun 2010
Location: Currently, North Carolina. But, I travel worldwide
as part of my job.
Posts: 289
After having similar frustration with Invicta, I took a hiatus from purchasing from them for what is about two years now. It was not a
bad thing as I discovered a few things during that time. One, I discovered brands like NFW, Android and even Stuhrling and found
that their CS was like no other (NFW wins, hands down, in the QC and CS department).
Also, I found that I truly loved the Invictas that I already had - Reserve models from 2003 - 2007. In fact, I'm hunting down Invicta
Reserves from that era right now.
Invicta is at its consistent best in the $200 - $400 price point (my
opinion); even today. But, I would not purchase from them ever
again until they clean up issues like this. When they market relatively small batches of a specific "high end" Invicta watch (as in
this case), the QC should be beyond reproach.
I don't bash the brand itself because I honestly have enjoyed some
truly awesome Invicta works-of-art, at a relatively low cost and tremendous value. But, I do cringe at seeing reports of chrono
hands not lining-up, or of bezels not lining up, etc, when it's a highly touted Invicta watch such as this. Invicta has an incredible impact
in the watch industry; I just want them to live up to their potential. When I wear one of their creations, I'm not just wearing something
I purchased at a great value, I'm also wearing a certain legacy and reputation that can only truly be earned and established by Invicta
itself, and I hate it when they fall short.
I hope it gets better. In the end, you can send it back to Invicta for a
warranty repair and get to wear that awesome watch in the future.
NCEngineer
NCEngineer
NCEngineer
NCEngineer
#9
Yesterday, 10:11 PM
jimmyv
Senior Member
Super Geek
Join Date: Nov 2009
Location: Phoenix, Arizona
Posts: 1,291
Real Name: Jim
Many wondered why these had stopped being presented when there were still hundreds left and
maybe we're starting to see why now. I know they were only presented once or twice after the
bad reset on air with the chrono. I was really hoping that was an isolated incident and it still
seems like the good are outweighing the bad but this is still very troubling.
jimmyv
jimmyv
jimmyv
jimmyv
#10
Yesterday, 10:12 PM
Leed24
Senior Member
Super Geek
Join Date: Sep 2009
Location: Phoenix, AZ.
Posts: 2,110
Real Name: Lee
First off let me say, sorry to hear of your Speedway problem. However, how often do you use
the stopwatch functions 20 times in a row like that ? Someone tells you to run your chrono 20
times in a row to see if it breaks and then when it does your mad ? I recommend that you drop it
20 times on the counter to test its shock resistance properties. If your using your stopwatch that
often buy a cheap digital. Spare us your profanity on this website.
__________________
Leed24
Leed24
Leed24
Leed24
Leed24
#11
Yesterday, 10:13 PM
strutn45
Senior Member
True WatchGeek
Join Date: Mar 2009
Location: "Da Swamp" LA.
Posts: 11,698
Real Name: John "DID DAT"
Bummer!
__________________
strutn45
strutn45
strutn45
strutn45
#12
Yesterday, 10:15 PM
dbranch
Senior Member
Master WatchGeek
Join Date: Mar 2008
Location: Long Beach, California
Posts: 4,062
Quote:
Originally Posted by Leed24
First off let me say, sorry to hear of your Speedway problem. However, how often do you use
the stopwatch functions 20 times in a row like that ? Someone tells you to run your chrono 20
times in a row to see if it breaks and then when it does your mad ? I recommend that you drop
it 20 times on the counter to test its shock resistance properties. If your using your stopwatch
that often buy a cheap digital. Spare us your profanity on this website.
Thank you, Leed24, for saying exactly what I was thinking...
__________________
What if the hokey pokey was really what it's all about?
dbranch
dbranch
dbranch
dbranch
#13
Yesterday, 10:17 PM
mdhorner
Senior Member
Master WatchGeek
Join Date: Oct 2009
Location: Chicago, IL
Posts: 3,185
Real Name: Michael
Quote:
Originally Posted by Leed24
First off let me say, sorry to hear of your Speedway problem. However, how often do you use
the stopwatch functions 20 times in a row like that ? Someone tells you to run your chrono 20
times in a row to see if it breaks and then when it does your mad ? I recommend that you drop
it 20 times on the counter to test its shock resistance properties. If your using your stopwatch
that often buy a cheap digital. Spare us your profanity on this website.
while I agree that nobody uses it in that way, I also have to say that for a $800 watch, I'd expect
to run the chrono 30 times in a row and reset to zero every time. Also agree with the profanity. I
always have to bite my tongue.
__________________
A flush always beats a straight unless the guy with the straight
carries a gun. -Norman Chad
mdhorner
mdhorner
mdhorner
mdhorner
#14
Yesterday, 10:20 PM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
I just hope whoever told these people to keep pushing buttons 20 times in a row
knows what they are doing ,I mean geez I did not do that to mine . It should be
tested absolutely but I hope they are not over doing it is all Im saying.
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#15
Yesterday, 10:20 PM
BG
Senior Member
Master WatchGeek
Join Date: Sep 2008
Location: Fort Lauderdale, FL
Posts: 2,678
Real Name: Barry
Either send it back for a refund, or and exchange.. Sounds like you've got a defective one, and
since the module was put onto the movement by DD, I'm wondering about how they were
shipped to Invicta from their factory to be placed into the watches...Not sure where this went
wrong, but I would not hesitate to exchange...
Have had mine 24 hours and set to atomic clock and so far it's perfect, not even 1 second off..
Ran the Chrono about an hour, reset perfectly..
__________________
Barry G
Fort Lauderdale, FL
BG
BG
BG
BG
BG
#16
Yesterday, 10:23 PM
Leed24
Senior Member
Super Geek
Join Date: Sep 2009
Location: Phoenix, AZ.
Posts: 2,110
Real Name: Lee
Quote:
Originally Posted by mdhorner
while I agree that nobody uses it in that way, I also have to say that for a $800 watch, I'd
expect to run the chrono 30 times in a row and reset to zero every time. Also agree with the
profanity. I always have to bite my tongue.
Although I agree with the expensive $800 comment, I really don't believe that we watch
collectors buy these watches to use as an industrial stop watch. Most buy because they might
occasionally time something. Most of us buy chronographs because we like the look of the
watch. The people on this site have become obsessed with purposefully trying to break this
watch, and it is ridiculous. __________________
Leed24
Leed24
Leed24
Leed24
Leed24
#17
Yesterday, 10:25 PM
jimmyv
Senior Member
Super Geek
Join Date: Nov 2009
Location: Phoenix, Arizona
Posts: 1,291
Real Name: Jim
I admit 20 times is a bit excessive but it doesn't sound like it was ok for 20 and then went bad.
Sounds like it was gradually going off after just a few uses and if the movement can't be
consistent after that then there definitely is an issue somewhere. Also, who's to say that just
because it's all done in a row that many times means it going off was only due to that. It may just
start going off center upon reset after some use even if it is stretched over time so it is almost
better to make sure it can handle it while it is still within the looking over process. Would suck
to have it go bad 32 days after you get it and the return policy is up and then be out a new watch
for months while it gets serviced.
jimmyv
jimmyv
jimmyv
jimmyv
#18
Yesterday, 10:26 PM
jackievictor
Senior Member
Super Geek
Join Date: Jan 2009
Location: Upstate, NY
Posts: 2,349
Real Name: Victor
Quote:
Originally Posted by madman146@gmail.com
Thought mine (Black #003) was OK until a read another post about running the chrono 20
times and guess what!
Started out OK but gradually stopped resetting at 12:00 moving forward 1 second, then 3
seconds off and now it's at 4 seconds off center.
If this is one of Invicta's "flagship" models it should really be called "FLAGSHIT"
I'm really getting tired of sending Invicta's back and I'm done with this brand!
They really need to set their priorities and get their QC together now!
It's the watch nuts like us that "try" to be loyal but how many chances do they get!
Over and over, issues and issues ... enough already INVICTA!
UPDATE:
It's just keeps getting worse ... seems everytime I run the chrono it resets later, now at 22
secs!
Also when I try to manually wind the watch I hear a clicking sound
Let's see the pics.
__________________
Victor
jackievictor
jackievictor
jackievictor
jackievictor
#19
Yesterday, 10:28 PM
mdhorner
Senior Member
Master WatchGeek
Join Date: Oct 2009
Location: Chicago, IL
Posts: 3,185
Real Name: Michael
Quote:
Originally Posted by Leed24
Although I agree with the expensive $800 comment, I really don't believe that we watch
collectors buy these watches to use as an industrial stop watch. Most buy because they might
occasionally time something. Most of us buy chronographs because we like the look of the
watch. The people on this site have become obsessed with purposefully trying to break this
watch, and it is ridiculous.
I see what you're saying. I never use the chrono, but I want to know that if I ever decide to, it'll
work like it is supposed to. Also, it's garbage if one day I'll try to sell it and find out about the
issue. I guess people are very cautious now with these high end invictas and test/inspect every
little aspect of it and I can't blame them. So far my personal experience has been mostly pleasant
(knock on wood).
__________________
A flush always beats a straight unless the guy with the straight
carries a gun. -Norman Chad
mdhorner
mdhorner
mdhorner
mdhorner
#20
Yesterday, 10:29 PM
WatchYaThink
Senior Member
Master WatchGeek
Join Date: Sep 2008
Location: Sunnyvale, CA
Posts: 3,445
Real Name: Larry
Quote:
Originally Posted by Leed24
First off let me say, sorry to hear of your Speedway problem. However, how often do you use
the stopwatch functions 20 times in a row like that ? Someone tells you to run your chrono 20
times in a row to see if it breaks and then when it does your mad ? I recommend that you drop
it 20 times on the counter to test its shock resistance properties. If your using your stopwatch
that often buy a cheap digital. Spare us your profanity on this website.
Are you actually serious ??!! An $800 watch, and if you use its functions a couple times in a row
that breaks it .... and you think this is just fine?? I'm an engineer and I often actually use my
stopwatch function repeatedly, and I fully expect a "quality" watch to be able to do that without
breaking.
Did anyone else see the shop on-air presentation where (I forgot who the presenter was) but she
was saying that one of the unique features of this watch is the way it "snaps back when you reset
the chrono" ... and the camera was zoomed in when she pressed the reset, and the second hand
snapped back to the '1' position .... nobody said anything, but the sample was obviously not
working properly.
Seems like there are being an awful lot of these being reported.
__________________
My computer has never had an undetected error ..... as far as I know.
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
#21
Yesterday, 10:31 PM
Leed24
Senior Member
Super Geek
Join Date: Sep 2009
Location: Phoenix, AZ.
Posts: 2,110
Real Name: Lee
You know what, if I am wrong I am wrong. I will take the heat. There just seems like something
logically wrong with purposefully trying to break something that in my opinion really was not
designed for heavy use like that.
__________________
Leed24
Leed24
Leed24
Leed24
Leed24
#22
Yesterday, 10:35 PM
Leed24
Senior Member
Super Geek
Join Date: Sep 2009
Location: Phoenix, AZ.
Posts: 2,110
Real Name: Lee
Quote:
Originally Posted by WatchYaThink
Are you actually serious ??!! An $800 watch, and if you use its functions a couple times in a
row that breaks it .... and you think this is just fine?? I'm an engineer and I often actually use
my stopwatch function repeatedly, and I fully expect a "quality" watch to be able to do that
without breaking.
Did anyone else see the shop on-air presentation where (I forgot who the presenter was) but
she was saying that one of the unique features of this watch is the way it "snaps back when you
reset the chrono" ... and the camera was zoomed in when she pressed the reset, and the second
hand snapped back to the '1' position .... nobody said anything, but the sample was obviously
not working properly.
Seems like there are being an awful lot of these being reported.
You know what Larry, I really don't care what your profession is. What I am really surprised
about is that it took you so long to get your ple out and stir the pot. It is always a small handful
that we can count on to be unappointed detectives for us all, and I know that I can always count
on you to brighten my day.
__________________
Leed24
Leed24
Leed24
Leed24
Leed24
#23
Yesterday, 10:37 PM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by jimmyv
Many wondered why these had stopped being presented when there were still hundreds left
and maybe we're starting to see why now. I know they were only presented once or twice after
the bad reset on air with the chrono. I was really hoping that was an isolated incident and it
still seems like the good are outweighing the bad but this is still very troubling.
I inquired about that Jimmy because I did not see it and the girl who brings the
watches out dropped it on the floor so the watch was pulled after that. These
watches cannot take a big fall it will throw them off and that was why I am on the
shipping so much. __________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#24
Yesterday, 10:37 PM
kramer5150
Senior Member
Super Geek
Join Date: Jun 2008
Posts: 1,941
Real Name: Garrett
A top notch movement and near flagship product should not fail under such conditions... I would
pursue a refund. Maybe an exchange for a different one will fare better. good Luck
__________________
kramer5150
kramer5150
kramer5150
kramer5150
#25
Yesterday, 10:37 PM
RKD0110
Senior Member
Senior Geek
Join Date: May 2009
Location: KY
Posts: 237
Real Name: Rick
Wow, I love the look but have no confidence in what Invicta is selling currently.
for watches only
Senior Member
Super Geek
Join Date: Mar 2008
Posts: 1,173
I am sure that some received problem watches. That stated, I can only speak for myself. I got
#52/250 today, and everything checks out; even checked the caseback screws- perfectly tight.
Chrono seems to work great, and the movement is smooth. IMO, the watch feels like quality.
Nicely substantial. I am testing the accuracy, and over 7 hours is running 2-3 sec fast. While
that's not the +- 1 sec, I'll take 10 sec in 24 hrs. I'll hope for some emprovement over time.
BTW, I find the CF very impressive looking.
Larry
for watches only
for watches only
for watches only
for watches only
#27
Yesterday, 10:37 PM
strutn45
Senior Member
True WatchGeek
Join Date: Mar 2009
Location: "Da Swamp" LA.
Posts: 11,698
Real Name: John "DID DAT"
Quote:
Originally Posted by Leed24
You know what Larry, I really don't care what your profession is. What I am really surprised
is that it took you so long to get your ple out and stir the pot. It is always a small handful that
we can count on to be unappointed detectives for us all, and I know that I can always count on
you to brighten my day.
LMAO, that i definitely agree on!
__________________
strutn45
strutn45
strutn45
strutn45
#28
Yesterday, 10:39 PM
WatchYaThink
Senior Member
Master WatchGeek
Join Date: Sep 2008
Location: Sunnyvale, CA
Posts: 3,445
Real Name: Larry
There are lots of occasions where a chronograph may be used repeatedly, at the race track, in the
lab ... many scenarios ..... that is not "purposefully trying to break it" .... that's just using it. If a
watch, especially a very expensive watch, is going to include a chronograph function then it
should be able to be used. If repeated use of the chrono function produces a high risk of breaking
the watch, then there should be a warning notice.
__________________
My computer has never had an undetected error ..... as far as I know.
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
#29
Yesterday, 10:40 PM
Drops
Senior Member
Super Geek
Join Date: Apr 2009
Location: Warwick, RI
Posts: 2,183
Real Name: Jason
Quote:
Originally Posted by Chief68
I just hope whoever told these people to keep pushing buttons 20 times in a
row knows what they are doing ,I mean geez I did not do that to mine . It
should be tested absolutely but I hope they are not over doing it is all Im
saying.
Doesn't Invicta QC department run some kind of test like this .... especially if they are hand
assembled ....
__________________
Drops
Drops
Drops
Drops
#30
Yesterday, 10:41 PM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by WatchYaThink
Are you actually serious ??!! An $800 watch, and if you use its functions a couple times in a
row that breaks it .... and you think this is just fine?? I'm an engineer and I often actually use
my stopwatch function repeatedly, and I fully expect a "quality" watch to be able to do that
without breaking.
Did anyone else see the shop on-air presentation where (I forgot who the presenter was) but
she was saying that one of the unique features of this watch is the way it "snaps back when you
reset the chrono" ... and the camera was zoomed in when she pressed the reset, and the second
hand snapped back to the '1' position .... nobody said anything, but the sample was obviously
not working properly.
Seems like there are being an awful lot of these being reported.
Larry I am not saying that there is not a problem with these it
is too early yet but everyone keeps bringing up that night on
TV and the girl dropped the watch on the floor prior to airing
that night. The watch was operating fine before that and as for
you saying a couple of times 20 is borderline abuse and it is
above normal operation so I just hope whoever advised the
members to do this knows what they are talking about.
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#31
Yesterday, 10:41 PM
WatchYaThink
Senior Member
Master WatchGeek
Join Date: Sep 2008
Location: Sunnyvale, CA
Posts: 3,445
Real Name: Larry
Quote:
Originally Posted by strutn45
LMAO, that i definitely agree on!
Hahahah .... yeah, I'm LMAO also .... it was so predictable.
__________________
My computer has never had an undetected error ..... as far as I know.
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
#32
Yesterday, 10:42 PM
WatchYaThink
Senior Member
Master WatchGeek
Join Date: Sep 2008
Location: Sunnyvale, CA
Posts: 3,445
Real Name: Larry
Thanks for that Nick .... I didn't know that watch had just been dropped on the floor.
__________________
My computer has never had an undetected error ..... as far as I know.
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
#33
Yesterday, 10:44 PM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by Drops
Doesn't Invicta QC department run some kind of test like this .... especially if they are hand
assembled ....
Jason I am sure it is checked and as I have said a million times Invicta would not
send out a broken product that I am sure of. I am not sure what is transpiring
from the time it leaves them until it gets to us their in lies the problem I would
guess. __________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#34
Yesterday, 10:45 PM
jimmyv
Senior Member
Super Geek
Join Date: Nov 2009
Location: Phoenix, Arizona
Posts: 1,291
Real Name: Jim
Quote:
Originally Posted by Chief68
I inquired about that Jimmy because I did not see it and the girl who brings the
watches out dropped it on the floor so the watch was pulled after that. These
watches cannot take a big fall it will throw them off and that was why I am on the
shipping so much.
And that's why I didn't really bring it up when I first saw it because the other ones all looked fine
when I saw them on air and I hoped it was a one time thing but wanted to point it out when
others started reporting issues. I know we've seen a lot more good than bad but like I said the
bad ones are still troubling ya know.
jimmyv
jimmyv
jimmyv
jimmyv
#35
Yesterday, 10:45 PM
me 1959
Senior Member
Senior Geek
Join Date: Jun 2010
Posts: 339
im really sorry to hear your having the problem with that watch and i can understand you being
upset I have had good luck myself with the brand I only have three and one is a pro diver 43mm
sappire crystal sw200 engine and i love it
me 1959
me 1959
me 1959
me 1959
#36
Yesterday, 10:48 PM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by WatchYaThink
Thanks for that Nick .... I didn't know that watch had just been dropped on the floor.
No one did Larry until I asked because I did miss that show but after reading
about it here I asked and was told what had happened. If the girl would of told
them before the show they would of pulled the watch and checked it. After that
happened she told them, Too late by then however .
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#37
Yesterday, 10:52 PM
Drops
Senior Member
Super Geek
Join Date: Apr 2009
Location: Warwick, RI
Posts: 2,183
Real Name: Jason
Quote:
Originally Posted by Chief68
Jason I am sure it is checked and as I have said a million times Invicta would
not send out a broken product that I am sure of. I am not sure what is
transpiring from the time it leaves them until it gets to us their in lies the
problem I would guess.
im sure they do test them...have about 30 invictas never had a problem with any of them
__________________
Drops
Drops
Drops
Drops
#38
Yesterday, 10:54 PM
jwin66
Senior Member
Veteran Geek
Join Date: Jul 2009
Location: Philadelphia, PA
Posts: 939
Real Name: Jon
Sorry to hear that..I was seriously considering acquiring this
model in the near future..I think I am gonna wait a little longer
to see the ratio of good to bad reviews on this model..I
seriously hope this isolated incident does not become
contagious with other geeks DD Speedway models..
I would send it back ASAP
I hope your exchange fairs better
Good Luck
Jon
__________________
jwin66
jwin66
jwin66
jwin66
jwin66
#39
Yesterday, 10:55 PM
Azel88
Senior Member
Master WatchGeek
Join Date: Apr 2009
Location: chicago
Posts: 2,677
Well what can ya do i would send it back and forget about it..
Azel88
Azel88
Azel88
Azel88
#40
Yesterday, 11:01 PM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,753
Interesting observation going on here am I lost here or did Invicta build these movements?
Hmmmmmm....I dont recall Invicta making the DD movement but maybe I am so lost in this
hobby that I have no clue as too what I am talking about.
Geez send the damn thing back, and move on!
Oh I am sorry that would be the responsible thing to do, my bad I forgot this is the I am the poor
victim section and I sure be more sympathetic to you situation.
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#41
Yesterday, 11:08 PM
NG111
Senior Member
Master WatchGeek
Join Date: Jun 2008
Location: Santa Clarita, CA
Posts: 3,854
Real Name: Nate
Quote:
Originally Posted by Azel88
Well what can ya do i would send it back and forget about it..
+1, problem solved.
NG111
NG111
NG111
NG111
NG111
#42
Yesterday, 11:11 PM
EVIL "X"
Senior Member
Veteran Geek
Join Date: Feb 2009
Location: Upstate NY
Posts: 813
Really?
Quote:
Originally Posted by Chief68
No one did Larry until I asked because I did miss that show but after reading
about it here I asked and was told what had happened. If the girl would of told
them before the show they would of pulled the watch and checked it. After that
happened she told them, Too late by then however .
Who gave out this information? And you believe this explanation?
__________________
EVILX
EVIL "X"
EVIL "X"
EVIL "X"
EVIL "X"
#43
Yesterday, 11:13 PM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,753
Quote:
Originally Posted by EVIL "X"
Who gave out this information? And you believe this explanation?
Being the man is pretty damn connected....bet your ass the explaination is credible!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#44
Yesterday, 11:13 PM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by EVIL "X"
Who gave out this information? And you believe this explanation?
The person who told me would never lie to me , and if you knew me you would
know I do not lie either. __________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#45
Yesterday, 11:14 PM
ky
Senior Member
Senior Geek
Join Date: Mar 2008
Location: City Of Angels via The Windy City
Posts: 413
It would seem to me if you constantly reset an automatic chronograph with
that harsh snap back feature over and over again, the possibility of the
hands becoming loose on the shaft could potentially happen.
I wouldn't do it more than 5 continuous times on any automatic
chronograph.
20 or more times seems borderline reckless...
You might as well start your car in the morning and rev the engine 20 times back to back on a cold day...IMO __________________
ky
ky
ky
ky
#46
Yesterday, 11:15 PM
roq106.7
Senior Member
Senior Geek
Join Date: Mar 2008
Posts: 220
can't we all just get along? lol
roq106.7
roq106.7
roq106.7
roq106.7
roq106.7
#47
Yesterday, 11:16 PM
Larrycod
Member
Member Geek
Join Date: May 2010
Location: Maryland
Posts: 60
Wow....Still waiting for mine to ship....Its crazy do I keep the watch coming or switch into
something else..... Seems like its a crap shoot with this DD......
Larrycod
Larrycod
Larrycod
Larrycod
Larrycod
#48
Yesterday, 11:23 PM
Wild Bill
Senior Member
Senior Geek
Join Date: Aug 2010
Location: Frostbite falls MN
Posts: 181
Real Name: Bill
Quote:
Originally Posted by RipitRon
Being the man is pretty damn connected....bet your ass the explaination is credible!
I asked Jim a couple of months ago why he was tapping an sw200 pro diver on the desk because
the rotor was frozen during the presentation. He said "because it was dropped twice on a the
concrete floor". Coincidence or the standard excuse? I have heard this twice now, makes you
wonder.
Then again, maybe they drop stuff all the time.
http://www.watchgeeks.net/showthread.php?t=129194
Wild Bill
Wild Bill
Wild Bill's
Wild Bill
Wild Bill
#49
Yesterday, 11:26 PM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,753
Quote:
Originally Posted by Wild Bill
I asked Jim a couple of months ago why he was tapping an sw200 pro diver on the desk
because the rotor was frozen during the presentation. He said "because it was dropped twice
on a the concrete floor". Coincidence or the standard excuse? I have heard this twice now,
makes you wonder.
Then again, maybe they drop stuff all the time.
Why would it make you wonder?
Have you never dropped anything? Unless I am there and seen it with my own two eye's why
would I second guess what happened?
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#50
Yesterday, 11:26 PM
ky
Senior Member
Senior Geek
Join Date: Mar 2008
Location: City Of Angels via The Windy City
Posts: 413
Quote:
Originally Posted by Larrycod
Wow....Still waiting for mine to ship....Its crazy do I keep the watch coming or switch into
something else..... Seems like its a crap shoot with this DD......
I wonder if all these people doing the snap chrono reset over and over again are doing the same
thing at watch shops when they are checking out a potential purchase...
Or is this just an Invicta thing to see how quick someone can screw it up...
Just curious...
harlan.mcDonald@gmail.com
Member
Member Geek
Join Date: Nov 2010
Posts: 96
Real Name: Harlan
Could all of the people that say that 20 times is abuse please give a number that you would
deem reasonable?
harlan.mcDonald@gmail.com
harlan.mcDonald@gmail.com
harlan.mcDonald@gmail.com
harlan.mcDonald@gmail.com
#52
Yesterday, 11:29 PM
Nismo
Senior Member
Super Geek
Join Date: Jan 2010
Location: Holland, MI
Posts: 2,176
Real Name: John
madman... you sure had some rough luck, especially with alignment issues:
10/6: http://watchgeeks.net/showthread.php...60#post1983760
6/11: http://watchgeeks.net/showthread.php?t=111015
8/4: http://watchgeeks.net/showthread.php?t=120877
http://watchgeeks.net/showthread.php...79#post1834279
....wishing you more luck in the future.
__________________
VENOM / SAIV / 350Z / 88 / MGS / threeA / WATCH GEEK
Nismo
Nismo
Nismo
Nismo
#53
Yesterday, 11:29 PM
Wild Bill
Senior Member
Senior Geek
Join Date: Aug 2010
Location: Frostbite falls MN
Posts: 181
Real Name: Bill
Quote:
Originally Posted by RipitRon
Why would it make you wonder?
Have you never dropped anything? Unless I am there and seen it with my own two eye's why
would I second guess what happened?
A good point. Like dogs really do not eat homework. Then again, maybe they do. Have not had
a dog for 20 years.
Wild Bill
Wild Bill
Wild Bill's
Wild Bill
Wild Bill
#54
Yesterday, 11:30 PM
WatchYaThink
Senior Member
Master WatchGeek
Join Date: Sep 2008
Location: Sunnyvale, CA
Posts: 3,445
Real Name: Larry
Okay, this is just a theoretical question ..... would there be a difference between resetting the
chrono five times in a short span vs. resetting the chrono once a day for five days? If a problem
is going to occur after X number of resets, does it matter if they are close together or spread out
over days? It seems like in either case the amount of stress induced is going to be the same?
__________________
My computer has never had an undetected error ..... as far as I know.
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
#55
Yesterday, 11:33 PM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,753
Quote:
Originally Posted by WatchYaThink
Okay, this is just a theoretical question ..... would there be a difference between resetting the
chrono five times in a short span vs. resetting the chrono once a day for five days? If a
problem is going to occur after X number of resets, does it matter if they are close together or
spread out over days? It seems like in either case the amount of stress induced is going to be
the same?
Being an engineer you know that isnt the case at all. Continual movement and stress back to
back is more stressful then a spanned out scenario. Come on now that was engineering 101, and
you know that!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#56
Yesterday, 11:33 PM
Wild Bill
Senior Member
Senior Geek
Join Date: Aug 2010
Location: Frostbite falls MN
Posts: 181
Real Name: Bill
A Ferrari going from 0 to 100mph to 0 in 10 seconds can be done easily but do it 20 times in a
row and it will break.
Wild Bill
Wild Bill
Wild Bill's
Wild Bill
Wild Bill
#57
Yesterday, 11:34 PM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,753
Quote:
Originally Posted by Wild Bill
A good point. Like dogs really do not eat homework. Then again, maybe they do. Have not had
a dog for 20 years.
Funny you say that because less then a year ago my Bullmastiff Khan ate $80.00 and my
drawing that I had laid out for a presentation I had to do.
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#58
Yesterday, 11:35 PM
Wild Bill
Senior Member
Senior Geek
Join Date: Aug 2010
Location: Frostbite falls MN
Posts: 181
Real Name: Bill
EXCELLENT POST RIP!!!
Wild Bill
Wild Bill
Wild Bill's
Wild Bill
Wild Bill
#59
Yesterday, 11:35 PM
BG
Senior Member
Master WatchGeek
Join Date: Sep 2008
Location: Fort Lauderdale, FL
Posts: 2,678
Real Name: Barry
Larry, Don't pre-judge yours based on a few posts hear.. When I first got mine, I wasn't sure how
I liked it, but the more I look at it that black carbon fiber dial and the white and silver markers
and chapter rings are amazing, and it's the most accurate watch I've ever owned so far... Over 24
hours it's perfect against the atomic clock, not one second off..
I'm starting to love this watch!!!
__________________
Barry G
Fort Lauderdale, FL
BG
BG
BG
BG
BG
#60
Yesterday, 11:38 PM
WatchYaThink
Senior Member
Master WatchGeek
Join Date: Sep 2008
Location: Sunnyvale, CA
Posts: 3,445
Real Name: Larry
Quote:
Originally Posted by RipitRon
Being an engineer you know that isnt the case at all. Continual movement and stress back to
back is more stressful then a spanned out scenario. Come on now that was engineering 101,
and you know that!
My field is electronics, not this mechanical stuff. But it seems like if you're letting the chrono
run for at least like 15 to 20 seconds, and then resetting ... it's not "continual" .... if you do that 5
times it would seem like the cummulative stress would be the same (or at least very similar to) if
the five resets were more spread out in time?
__________________
My computer has never had an undetected error ..... as far as I know.
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
#61
Yesterday, 11:40 PM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,753
Quote:
Originally Posted by WatchYaThink
My field is electronics, not this mechanical stuff. But it seems like if you're letting the chrono
run for at least like 15 to 20 seconds, and then resetting ... it's not "continual" .... if you do that
5 times it would seem like the cummulative stress would be the same (or at least very similar
to) if the five resets were more spread out in time?
Think of like hitting the motor starter on a 25 hp motor run it for 5 seconds and shutting it down
and doing it again, and again, and again. The thermal overloads are going to get hot and trip the
breaker. Same principle applies here.
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#62
Yesterday, 11:44 PM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,753
Quote:
Originally Posted by Nismo
madman... you sure had some rough luck, especially with alignment issues:
10/6: http://watchgeeks.net/showthread.php...60#post1983760
6/11: http://watchgeeks.net/showthread.php?t=111015
8/4: http://watchgeeks.net/showthread.php?t=120877
http://watchgeeks.net/showthread.php...79#post1834279
....wishing you more luck in the future.
Isnt that interesting, if anything should be question it would be this particular Person. I mean
what are the odds?
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#63
Yesterday, 11:46 PM
Nismo
Senior Member
Super Geek
Join Date: Jan 2010
Location: Holland, MI
Posts: 2,176
Real Name: John
__________________
VENOM / SAIV / 350Z / 88 / MGS / threeA / WATCH GEEK
Nismo
Nismo
Nismo
Nismo
#64
Yesterday, 11:46 PM
ky
Senior Member
Senior Geek
Join Date: Mar 2008
Location: City Of Angels via The Windy City
Posts: 413
Quote:
Originally Posted by WatchYaThink
Okay, this is just a theoretical question ..... would there be a difference between resetting the
chrono five times in a short span vs. resetting the chrono once a day for five days? If a
problem is going to occur after X number of resets, does it matter if they are close together or
spread out over days? It seems like in either case the amount of stress induced is going to be
the same?
I understand your point.
But do you by a new sports car and run out and drive it 175 mph without
giving it a chance to get broken in first?
We are not talking about a digital watch here BTW...
We are talking about a fine movement.
Who said it was okay to reset this type of movement 20 consecutive times.
It just sounds really odd to me...
Did it reset the first 10 times okay and someone wanted to keep going to
20.
I would think continued resetting would have to generate heat or some
unnecessary stress somewhere in that movement or the hands...IMO... __________________
ky
ky
ky
ky
#65
Yesterday, 11:49 PM
jwin66
Senior Member
Veteran Geek
Join Date: Jul 2009
Location: Philadelphia, PA
Posts: 940
Real Name: Jon
Stress will kill just about anything granted..but what kind of
Tests does Invicta put these timepieces through to insure
accuracy and longevity of the movement within..Drop
tests...pressure tests..movement functionality tests to
simulate the normal everyday abuse that a chrono will go
through over its lifetime..How much testing does a 1K watch
buy these days vs. say a 10K Rolex Daytona...granted apples
to oranges comparison since Rolex builds all their movements
in house..
Jon
__________________
jwin66
jwin66
jwin66
jwin66
jwin66
#66
Yesterday, 11:50 PM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by ky
I understand your point.
But do you by a new sports car and run out and drive it 175 mph without giving it a chance to get broken in first?
We are not talking about a digital watch here BTW...
We are talking about a fine movement.
Who said it was okay to reset this type of movement 20 consecutive times.
It just sounds really odd to me...
Did it reset the first 10 times okay and someone wanted to keep going to 20.
I would think continued resetting would have to generate heat or some unnecessary stress somewhere in that movement or the hands...IMO...
That was my point as well and who suggested they do this ???
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#67
Yesterday, 11:51 PM
WatchYaThink
Senior Member
Master WatchGeek
Join Date: Sep 2008
Location: Sunnyvale, CA
Posts: 3,445
Real Name: Larry
Maybe Ron, but still seems like the principles are a little bit different though. It just seems like
the watch "should" be designed to stand up to this. I think it would be nice to see a statement
from DD about "acceptable chronograph use guidlines".
Now I'm shutting off the computer to go watch Avi .... um, I mean watch Xoskeleton show.
__________________
My computer has never had an undetected error ..... as far as I know.
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
#68
Yesterday, 11:55 PM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,753
Quote:
Originally Posted by WatchYaThink
Maybe Ron, but still seems like the principles are a little bit different though. It just seems like
the watch "should" be designed to stand up to this. I think it would be nice to see a statement
from DD about "acceptable chronograph use guidlines".
You very well could be right, and maybe this particular situation is like winding the watch
backwards, or adjusting the time during the off limit hours? I personally dont by Automatic
chrono's a little too much trouble IMO, but if I did I sure as hell wouldnt run the thing 10,15 or
20 times in a row. Anything Mechanical right out of the box should never be abused, and in my
expert opinion this practice should never be done without consulting the MFG!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#69
Yesterday, 11:58 PM
azwatchgeek
Member
Member Geek
Join Date: Dec 2008
Location: Glendale, AZ where the sun always shines
Posts: 93
Real Name: Joe
Would one of the mods please do your job and lock this down! I can't be the only one who is
tired of reading these posts by fellow enthusiasts who constantly beat up on the OP when the OP
has something less than complimentary to post. I thought this for was designed to freely
communicate about watches and our watch related experiences? I guess that only applies to the
"moral majority". Yeah, you know who you are..........
__________________
I don't trust a man who doesn't wear a watch!!
azwatchgeek
azwatchgeek
azwatchgeek
azwatchgeek
#70
Yesterday, 11:59 PM
jwin66
Senior Member
Veteran Geek
Join Date: Jul 2009
Location: Philadelphia, PA
Posts: 940
Real Name: Jon
I guess you can break anything if ya screw with it long
enough..I'm just curious as to how much testing these DD
Speedways go through before they are put out on the
market..Invicta's assembly team at the factory doesn't just
case up the movement and send it on it's mary way..How
many days of testing do these movements undergo before they
leave the factory in Switzerland.. Granted these movements
are very complex with alot of parts to them...
Jon
__________________
jwin66
jwin66
jwin66
jwin66
jwin66
#71
Today, 12:01 AM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,753
Quote:
Originally Posted by azwatchgeek
Would one of the mods please do your job and lock this down! I can't be the only one who is
tired of reading these posts by fellow enthusiasts who constantly beat up on the OP when the
OP has something less than complimentary to post. I thought this for was designed to freely
communicate about watches and our watch related experiences? I guess that only applies to
the "moral majority". Yeah, you know who you are..........
DONT READ!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#72
Today, 12:02 AM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by azwatchgeek
Would one of the mods please do your job and lock this down! I can't be the only one who is
tired of reading these posts by fellow enthusiasts who constantly beat up on the OP when the
OP has something less than complimentary to post. I thought this for was designed to freely
communicate about watches and our watch related experiences? I guess that only applies to
the "moral majority". Yeah, you know who you are..........
Easy Joe , no reason to lock it down and I am doing my job . If I close it you then
have people that say I am protecting Invicta. __________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#73
Today, 12:03 AM
ky
Senior Member
Senior Geek
Join Date: Mar 2008
Location: City Of Angels via The Windy City
Posts: 413
Quote:
Originally Posted by azwatchgeek
Would one of the mods please do your job and lock this down! I can't be the only one who is
tired of reading these posts by fellow enthusiasts who constantly beat up on the OP when the
OP has something less than complimentary to post. I thought this for was designed to freely
communicate about watches and our watch related experiences? I guess that only applies to
the "moral majority". Yeah, you know who you are..........
I hope the OP is not taking it personal...
I'm just questioning the tactic used to test a seemingly functional watch...IMHO
I'm not trying to be disrespectful to anyone today at least...
__________________
ky
ky
ky
ky
#74
Today, 12:03 AM
Renotafan1
Senior Member
Senior Geek
Join Date: Mar 2008
Location: Fresno Ca.
Posts: 323
Real Name: Robert
That really suks, maybe the folks at invicta will see these posts and fixe the problems ?? seems
to be a real problem.
Renotafan1
Renotafan1
Renotafan1
Renotafan1
#75
Today, 12:04 AM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,753
Quote:
Originally Posted by jwin66
I guess you can break anything if ya screw with it long
enough..I'm just curious as to how much testing these DD
Speedways go through before they are put out on the
market..Invicta's assembly team at the factory doesn't just
case up the movement and send it on it's mary way..How
many days of testing do these movements undergo before
they leave the factory in Switzerland.. Granted these
movements are very complex with alot of parts to them...
Jon
I am sure they are tested to ensure that the movement functions properly after casing. I would
imagine that DD was in charge to ensure that the movement was functioning properly and
tested. I highly doubt that the movement was tested 20 times back to back like some have found
to be the testing method.
__________________
Hmmmmmmm. I can't say what I want to say!
jwin66
Senior Member
Veteran Geek
Join Date: Jul 2009
Location: Philadelphia, PA
Posts: 940
Real Name: Jon
Point taken..Like I said if ya beat anything to death even a
Rolex..eventually its gonna break..
Jon
__________________
jwin66
jwin66
jwin66
jwin66
jwin66
#77
Today, 12:08 AM
azwatchgeek
Member
Member Geek
Join Date: Dec 2008
Location: Glendale, AZ where the sun always shines
Posts: 93
Real Name: Joe
Quote:
Originally Posted by RipitRon
DONT READ!
Don't hate.
__________________
I don't trust a man who doesn't wear a watch!!
azwatchgeek
azwatchgeek
azwatchgeek
azwatchgeek
#78
Today, 12:09 AM
harlan.mcDonald@gmail.com
Member
Member Geek
Join Date: Nov 2010
Posts: 96
Real Name: Harlan
Quote:
Originally Posted by harlan.mcDonald@gmail.com
Could all of the people that say that 20 times is abuse please give a number that you would
deem reasonable?
Anyone?
harlan.mcDonald@gmail.com
harlan.mcDonald@gmail.com
harlan.mcDonald@gmail.com
harlan.mcDonald@gmail.com
#79
Today, 12:10 AM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,753
Quote:
Originally Posted by azwatchgeek
Don't hate.
I aint hating I am exploiting the obvious!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#80
Today, 12:10 AM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,753
Quote:
Originally Posted by harlan.mcDonald@gmail.com
Anyone?
Call Invicta!!!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#81
Today, 12:12 AM
azwatchgeek
Member
Member Geek
Join Date: Dec 2008
Location: Glendale, AZ where the sun always shines
Posts: 93
Real Name: Joe
Quote:
Originally Posted by Chief68
Easy Joe , no reason to lock it down and I am doing my job . If I close it you then
have people that say I am protecting Invicta.
Then maybe we should try and respect what the OP is saying. As I read through these posts I
cannot help but wonder why anyone that isn't "towing the line" would want to post anything at
all? I'm just saying to cut these guys some slack sometimes.
__________________
I don't trust a man who doesn't wear a watch!!
azwatchgeek
azwatchgeek
azwatchgeek
azwatchgeek
#82
Today, 12:13 AM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by harlan.mcDonald@gmail.com
Anyone?
Harlan when I buy a watch no matter what brand , I first check
the whole watch and look for any scratches or dents . Next I
will advance the time and check that the date changes
correctly and if there is a day and so on. I then if it has a
chrono start it let it run for 30 seconds stop and reset. I will
then start the chrono again run it for a minute stop and reset
it. If there are no issues it has passed my inspection and it is a
keeper. I am well over 400 watches in total and no problems
with any after my test.
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#83
Today, 12:14 AM
ky
Senior Member
Senior Geek
Join Date: Mar 2008
Location: City Of Angels via The Windy City
Posts: 413
Quote:
Originally Posted by harlan.mcDonald@gmail.com
Could all of the people that say that 20 times is abuse please give a number that you would
deem reasonable?
Quote:
Originally Posted by harlan.mcDonald@gmail.com
Anyone?
A better question should be if the chrono reset works up to five times continuously, why keep
going to 20?
Stress is stress...
__________________
ky
ky
ky
ky
#84
Today, 12:14 AM
Flyback
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Northern CA
Posts: 21,935
Real Name: Brad
I have no way of knowing what the actual mean-time-to-failure would be in an
automatic chronograph movement, but sheer logic tells me that operating one a mere
20 times in succession should have no impact on it. These are precision instruments,
not Veg-A-Matics. I don't own a watch with the Dubois Depraz 2021 chronograph
module, but nonetheless wanted to run a test of my own. I chose my Philip Watch
Sunray chronograph powered by the venerable Valjoux 7750 as it is one of the older
ones I own, which should make it more susceptible to slippage. I operated the
chronograph function in continuous succession from 0 to 15 seconds followed by an
immediate reset for 120 cycles with no adverse effect. The only reason I stopped was
out of boredom and tired fingers. IMHO based on the unavoidable logic that these
things have to be engineered to operate more than occasionally, there is something
amiss with those that are slipping. __________________
If n = the number of watches you have, then n + 1 = the number of watches you need!
Flyback
Flyback
Flyback
Flyback
#85
Today, 12:15 AM
harlan.mcDonald@gmail.com
Member
Member Geek
Join Date: Nov 2010
Posts: 96
Real Name: Harlan
Quote:
Originally Posted by Chief68
Harlan when I buy a watch no matter what brand , I first
check the whole watch and look for any scratches or dents .
Next I will advance the time and check that the date
changes correctly and if there is a day and so on. I then if it
has a chrono start it let it run for 30 seconds stop and reset. I
will then start the chrono again run it for a minute stop and
reset it. If there are no issues it has passed my inspection
and it is a keeper. I am well over 400 watches in total and no
problems with any after my test.
Your answer is TWO Times?
Thank you.
harlan.mcDonald@gmail.com
harlan.mcDonald@gmail.com
harlan.mcDonald@gmail.com
harlan.mcDonald@gmail.com
#86
Today, 12:24 AM
Evil Empire
Senior Member
Veteran Geek
Join Date: Jan 2010
Location: Powhatan Virginia
Posts: 789
Real Name: Scott
Stop watch?
Quote:
Originally Posted by Leed24
First off let me say, sorry to hear of your Speedway problem. However, how often do you use
the stopwatch functions 20 times in a row like that ? Someone tells you to run your chrono 20
times in a row to see if it breaks and then when it does your mad ? I recommend that you drop
it 20 times on the counter to test its shock resistance properties. If your using your stopwatch
that often buy a cheap digital. Spare us your profanity on this website.
Im sorry but I have to disagree,,, I use my 7750 every night to see how much sleep I actually got
I've never had a problem with it,you can defend all you want, it should work and it does not, I
love Invicta and own many, but they used this movement not because its rare but because they
could do it less expensive,Im still going with the reserve pro diver meteorite. Its on the way.Eal
is a very good business man its all about dollars.They make some very nice watches I just don't
think this is one of them
__________________
KIMBER COMPROMISE SOMEWERE ELSE
Evil Empire
Evil Empire
Evil Empire
Evil Empire
#87
Today, 12:24 AM
Drops
Senior Member
Super Geek
Join Date: Apr 2009
Location: Warwick, RI
Posts: 2,183
Real Name: Jason
read post 84 ...Brad ...I think nailed it
__________________
Drops
Drops
Drops
Drops
#88
Today, 12:26 AM
Flyback
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Northern CA
Posts: 21,935
Real Name: Brad
Quote:
Originally Posted by Drops
read post 84 ...Brad ...I think nailed it
Thanks Jason.
__________________
If n = the number of watches you have, then n + 1 = the number of watches you need!
Flyback
Flyback
Flyback
Flyback
#89
Today, 12:27 AM
steiner
Junior Member
New Geek
Join Date: Dec 2008
Location: San Diego, Ca.
Posts: 21
I use my Chrono's on my lesser priced Invictas and they always work perfectly. Every Invicta I
have is a "work of art" in it's price range. So do my Renatos and other brands. They work when I
push the pusher and I don't give it much thought. When they get out of line I readjust them and
off I go.
I expect these brands to work and they do and that's why I buy Them.
If I purchased a much higher priced version of movement for higher price I'd expect it to work at
least as good as the lesser ones do. Maybe I'm wrong. And if I heard there were some issues
with the model, I'd "TEST" it too before I decided to keep it.
I wouldn't consider it "trying to break it" on purpose, I'd just want to be sure, thats all.
steiner
steiner
steiner
steiner
#90
Today, 12:27 AM
battleshipduke
Senior Member
Super Geek
Join Date: Sep 2009
Location: Juneau, Alaska
Posts: 1,482
Real Name: Cal
My Invicta Leviathan 7750 just did 20 cycles in a row with no problems. That's why Horologists
agree that the Invicta Leviathan is the greatest time telling instrument ever devised as well as the
finest watch...in the world.
battleshipduke
battleshipduke
battleshipduke
battleshipduke
battleshipduke
#91
Today, 12:31 AM
Leed24
Senior Member
Super Geek
Join Date: Sep 2009
Location: Phoenix, AZ.
Posts: 2,110
Real Name: Lee
Quote:
Originally Posted by Evil Empire
Im sorry but I have to disagree,,, I use my 7750 every night to see how much sleep I actually
got I've never had a problem with it,you can defend all you want, it should work and it does
not, I love Invicta and own many, but they used this movement not because its rare but because
they could do it less expensive,Im still going with the reserve pro diver meteorite. Its on the
way.Eal is a very good business man its all about dollars.They make some very nice watches I
just don't think this is one of them
Good for you, I am glad it works out for you. Now on a nightly basis do you start it and stop it
2O times in a row or just the one time ? Do you have some sort of insider info we need to know
about. How do you know that Invicta uses the DD movement "because they could do it less
expensive" ? We agree to disagree. I still do not see the logic in starting and stopping this
movement 20 times in a row to see if it breaks.
__________________
Leed24
Leed24
Leed24
Leed24
Leed24
#92
Today, 12:34 AM
harlan.mcDonald@gmail.com
Member
Member Geek
Join Date: Nov 2010
Posts: 96
Real Name: Harlan
Quote:
Originally Posted by steiner
Maybe I'm wrong. And if I heard there were some issues with the model, I'd "TEST" it too
before I decided to keep it.
I wouldn't consider it "trying to break it" on purpose, I'd just want to be sure, thats all.
I have to agree, I would also TEST it vigorously if there were known problems in the past.
And since so many are using Automobile Analogies, just like buying a Toyota, I would
definitely TEST those brakes!
harlan.mcDonald@gmail.com
harlan.mcDonald@gmail.com
harlan.mcDonald@gmail.com
harlan.mcDonald@gmail.com
#93
Today, 12:35 AM
fxdb10
Senior Member
Senior Geek
Join Date: Jan 2010
Location: oklahoma
Posts: 181
Quote:
Originally Posted by Drops
read post 84 ...Brad ...I think nailed it
Sounds like brad nailed it to me and w/a old model VJ7750.
fxdb10
fxdb10
fxdb10
fxdb10
fxdb10
#94
Today, 12:39 AM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,753
Quote:
Originally Posted by DenverBuff
REMOVED BY MODERATOR .
So the movement having issues with the reset is actually Invicta? I think Charles Barkley said it
once " I maybe wrong, but I doubt it"
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#95
Today, 12:41 AM
Evil Empire
Senior Member
Veteran Geek
Join Date: Jan 2010
Location: Powhatan Virginia
Posts: 789
Real Name: Scott
Quote:
Originally Posted by flyback
i have no way of knowing what the actual mean-time-to-failure would be in an
automatic chronograph movement, but sheer logic tells me that operating one a
mere 20 times in succession should have no impact on it. These are precision
instruments, not veg-a-matics. I don't own a watch with the dubois depraz 2021
chronograph module, but nonetheless wanted to run a test of my own. I chose my
philip watch sunray chronograph powered by the venerable valjoux 7750 as it is
one of the older ones i own, which should make it more susceptible to slippage. i
operated the chronograph function in continuous succession from 0 to 15 seconds
followed by an immediate reset for 120 cycles with no adverse effect. the only
reason i stopped was out of boredom and tired fingers. Imho based on the
unavoidable logic that these things have to be engineered to operate more than
occasionally, there is something amiss with those that are slipping.
what brad said
__________________
KIMBER COMPROMISE SOMEWERE ELSE
Evil Empire
Evil Empire
Evil Empire
Evil Empire
#96
Today, 12:45 AM
DenverBuff
Member
Member Geek
Join Date: Apr 2009
Location: Denver, CO
Posts: 43
Quote:
Originally Posted by RipitRon
So the movement having issues with the reset is actually Invicta? I think Charles Barkley said
it once " I maybe wrong, but I doubt it"
Without question. D-D is used by several high-end watchmakers. Omega included. They don't
fail en masse like they do here. As Brad said above, they are precision instruments. If you throw
a Maserati engine in a Prius . . . you can't blame the engine if it doesn't run.
DenverBuff
DenverBuff
DenverBuff
DenverBuff
DenverBuff
#97
Today, 12:47 AM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,753
Quote:
Originally Posted by DenverBuff
Without question. D-D is used by several high-end watchmakers. Omega included. They don't
fail en masse like they do here. As Brad said above, they are precision instruments. If you
throw a Maserati engine in a Prius . . . you can't blame the engine if it doesn't run.
Stupid Analogy!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#98
Today, 12:51 AM
bosco7558
Senior Member
Veteran Geek
Join Date: Dec 2009
Location: Orlando, Florida
Posts: 669
Real Name: ed
Ripit, I'd be interested to see your comments if this were a Renato being discussed. It seems to
me that testing the chrono function on a very expensive watch a mere 20 times is not abuse,
simply a function test. This is another Invicta rushed through production without being fully
tested....if it were mine it would be sent back for a full refund. I feel for those of you who
purchased one. Good Luck
bosco7558
bosco7558
bosco7558
bosco7558
#99
Today, 12:52 AM
jimmyv
Senior Member
Super Geek
Join Date: Nov 2009
Location: Phoenix, Arizona
Posts: 1,291
Real Name: Jim
Quote:
Originally Posted by RipitRon
Stupid Analogy!
Wow, as usual you resort to insults which usually gets threads you're involved in closed. You're
so predictable man. I remember that Renato thread which was about peoples' first Renato and
you were in there multiple times just trashing Renato because you had one bad watch from them
but god forbid someone say something bad about an Invicta.
jimmyv
jimmyv
jimmyv
jimmyv
#100
Today, 12:53 AM
watchyourtimeco
Senior Member
Veteran Geek
Join Date: Oct 2010
Location: Raleigh, NC
Posts: 672
Real Name: Tim
Quote:
Originally Posted by madman146@gmail.com
Thought mine (Black #003) was OK until a read another post about running the chrono 20
times and guess what!
Started out OK but gradually stopped resetting at 12:00 moving forward 1 second, then 3
seconds off and now it's at 4 seconds off center.
So, you're saying this watch was working perfectly until you decided to start and reset the
chronograph 20 times in quick succession. Why on earth would you do that? You read
someone else broke their watch by doing this very thing and decided it sounded like a good
idea? I agree that a watch of this caliber should function flawlessly but how can that hand
snapping back to zero over and over be considered anything but abuse? This should be common
sense! There is no way I would ever subject one of my watches to that!
__________________
They call me..............................Tim?
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by bosco7558
Ripit, I'd be interested to see your comments if this were a Renato being discussed. It seems to
me that testing the chrono function on a very expensive watch a mere 20 times is not abuse,
simply a function test. This is another Invicta rushed through production without being fully
tested....if it were mine it would be sent back for a full refund. I feel for those of you who
purchased one. Good Luck
And that is what should happen, return it and move on. But dont make 4 different post about 4
different watches that all have the same problem and expect anyone to truly believe you. Come
on really do you think this particular individual has gotten 4 watches in a row that have all done
the exact same thing?
As far as Renato goes......I would say the same damn thing, but then again I cant remember the
last time they used a high end movement.
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#102
Today, 12:56 AM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by jimmyv
Wow, as usual you resort to insults which usually gets threads you're involved in closed.
You're so predictable man. I remember that Renato thread which was about peoples' first
Renato and you were in there multiple times just trashing Renato because you had one bad
watch from them but god forbid someone say something bad about an Invicta.
Well let me clarify, I was not calling him Stupid I was actually referencing his Analogy.
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#103
Today, 12:58 AM
bosco7558
Senior Member
Veteran Geek
Join Date: Dec 2009
Location: Orlando, Florida
Posts: 669
Real Name: ed
Quote:
Originally Posted by RipitRon
And that is what should happen, return it and move on. But dont make 4 different post about 4
different watches that all have the same problem and expect anyone to truly believe you. Come
on really do you think this particular individual has gotten 4 watches in a row that have all
done the exact same thing?
As far as Renato goes......I would say the same damn thing, but then again I cant remember the
last time they used a high end movement.
I guess we'll have to agree to disagree. Hopefully it'll all work out and Invicta will do the right
thing. Good luck to you all.....
bosco7558
bosco7558
bosco7558
bosco7558
#104
Today, 12:58 AM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by bosco7558
Ripit, I'd be interested to see your comments if this were a Renato being discussed. It seems to
me that testing the chrono function on a very expensive watch a mere 20 times is not abuse,
simply a function test. This is another Invicta rushed through production without being fully
tested....if it were mine it would be sent back for a full refund. I feel for those of you who
purchased one. Good Luck
There is only 3 defective that we know of that does not up to Invicta rushing
them through production. Facts Ed please . __________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#105
Today, 12:58 AM
ky
Senior Member
Senior Geek
Join Date: Mar 2008
Location: City Of Angels via The Windy City
Posts: 413
Quote:
Originally Posted by Flyback
I have no way of knowing what the actual mean-time-to-failure would be in an
automatic chronograph movement, but sheer logic tells me that operating one a
mere 20 times in succession should have no impact on it. These are precision
instruments, not Veg-A-Matics. I don't own a watch with the Dubois Depraz 2021
chronograph module, but nonetheless wanted to run a test of my own. I chose my
Philip Watch Sunray chronograph powered by the venerable Valjoux 7750 as it is
one of the older ones I own, which should make it more susceptible to slippage. I
operated the chronograph function in continuous succession from 0 to 15 seconds
followed by an immediate reset for 120 cycles with no adverse effect. The only
reason I stopped was out of boredom and tired fingers. IMHO based on the
unavoidable logic that these things have to be engineered to operate more than
occasionally, there is something amiss with those that are slipping.
Supposedly the 7750 is a heavy duty movement and is apperently built like a tank.
What you've done is probably fine for any 7750.
I don't necessarily think this applies to the DD.
I don't have a another brand with a DD movement to compare to.
Several geeks here do.
I wonder if they have tried up to 20 continuous resets with their other brand's DD movements
without any issues.
Just curious...
__________________
ky
ky
ky
ky
#106
Today, 12:59 AM
Flyback
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Northern CA
Posts: 21,935
Real Name: Brad
Quote:
Originally Posted by watchyourtimeco
So, you're saying this watch was working perfectly until you decided to start and reset the
chronograph 20 times in quick succession. Why on earth would you do that? You read
someone else broke their watch by doing this very thing and decided it sounded like a good
idea? I agree that a watch of this caliber should function flawlessly but how can that hand
snapping back to zero over and over be considered anything but abuse? This should be
common sense! There is no way I would ever subject one of my watches to that!
I have to disagree, in my just completed test of one of my V7750 movements described in my
post #84, I cycled it through this same function 120 times with no adverse effect and I feel
confident that I could have repeated it several hundred more times with the same result.
__________________
If n = the number of watches you have, then n + 1 = the number of watches you need!
Flyback
Flyback
Flyback
Flyback
#107
Today, 01:00 AM
albeeoo
Senior Member
Super Geek
Join Date: Apr 2009
Location: So. Cal.
Posts: 1,875
Real Name: albert
Quote:
Originally Posted by Drops
read post 84 ...Brad ...I think nailed it
I totally agree
albeeoo
albeeoo
albeeoo
albeeoo
albeeoo
#108
Today, 01:00 AM
Jaydawggy
Senior Member
Senior Geek
Join Date: May 2008
Location: Washington State
Posts: 136
I use my chronographs, albeit quartz chronographs, repeatedly at work. I supply chemicals to
industrial customers and often have to verify flow rates of the chemicals to the customer's
process. This is done by measuring the volume of material pumped from a cylinder for a given
period of time, usually 1 min. I usually measure the flow of each pump several times before
completing the needed adjustments. Many of the chemical applications that I service have
several pumps, each of which requires the calibrations that I perform. It is not unusual for me to
perform 30 cycles in one hour. I do expect that, over time there may be some wear and certainly
some dead batteries but there is no way that I would expect/accept a failure like we're talking
about here. I have one coworker that uses a Breitling to do the same work I do (freaking nuts if
you ask me...but hey, to each his own) and his watch IS an automatic chronograph. The
movement in his watch is based of the 7750 (I think) and it is super reliable. I guess that I don't
believe that 20 cycles performed in succession is excessive. I also don't believe that the
comparisons between cycling a mechanical chronograph movement and drag racing a Ferrari or
flushing a toilet 20 time in a row are accurate either.
Jaydawggy
Jaydawggy
Jaydawggy
Jaydawggy
#109
Today, 01:02 AM
Flyback
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Northern CA
Posts: 21,935
Real Name: Brad
Quote:
Originally Posted by ky
Supposedly the 7750 is a heavy duty movement and is apperently built like a tank.
What you've done is probably fine for any 7750.
I don't necessarily think this applies to the DD.
I don't have a another brand with a DD movement to compare to.
Several geeks here do.
I wonder if they have tried up to 20 continuous resets with their other brand's DD movements
without any issues.
Just curious...
There's a video in another thread that shows the production of a Dubois Depraz module and how
each and every part is electronically checked for tolerances. If anything, they should be more
reliable/durable as the parts are better engineered and better fitted.
One more thing, when Invicta introduced this movement last year, I scoured the web for any and
all bits of information to get myself up to speed on the DD module. There was/is absolutely no
reference anywhere to any susceptibility to slippage or any other defect for the matter.
__________________
If n = the number of watches you have, then n + 1 = the number of watches you need!
Flyback
Flyback
Flyback
Flyback
#110
Today, 01:05 AM
strutn45
Senior Member
True WatchGeek
Join Date: Mar 2009
Location: "Da Swamp" LA.
Posts: 11,698
Real Name: John "DID DAT"
Quote:
Originally Posted by ky
Supposedly the 7750 is a heavy duty movement and is apperently built like a tank.
What you've done is probably fine for any 7750.
I don't necessarily think this applies to the DD.
I don't have a another brand with a DD movement to compare to.
Several geeks here do.
I wonder if they have tried up to 20 continuous resets with their other brand's DD movements
without any issues.
Just curious...
Just for the hell of it tried my Tag Heuer Aquagraph w/DD module 20 times
without a problem... it re-set perfectly everytime as it should.
__________________
strutn45
strutn45
strutn45
strutn45
#111
Today, 01:06 AM
watchyourtimeco
Senior Member
Veteran Geek
Join Date: Oct 2010
Location: Raleigh, NC
Posts: 672
Real Name: Tim
Quote:
Originally Posted by Flyback
I have no way of knowing what the actual mean-time-to-failure would be in an
automatic chronograph movement, but sheer logic tells me that operating one a
mere 20 times in succession should have no impact on it. These are precision
instruments, not Veg-A-Matics. I don't own a watch with the Dubois Depraz 2021
chronograph module, but nonetheless wanted to run a test of my own. I chose my
Philip Watch Sunray chronograph powered by the venerable Valjoux 7750 as it is
one of the older ones I own, which should make it more susceptible to slippage. I
operated the chronograph function in continuous succession from 0 to 15 seconds
followed by an immediate reset for 120 cycles with no adverse effect. The only
reason I stopped was out of boredom and tired fingers. IMHO based on the
unavoidable logic that these things have to be engineered to operate more than
occasionally, there is something amiss with those that are slipping.
This isn't the same thing, though. I don't own one of the DD watches but, correct me if I'm
wrong, doesn't the chronograph hand snap back to zero? The 7750 smoothly resets. This is the
difference. Since it snaps back to zero, there is much more stress on the hand. Doing this 20
times in rapid succession is certainly much more stress than doing it spread out over time.
__________________
They call me..............................Tim?
watchyourtimeco
watchyourtimeco
watchyourtimeco
watchyourtimeco
watchyourtimeco
#112
Today, 01:08 AM
Flyback
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Northern CA
Posts: 21,935
Real Name: Brad
Quote:
Originally Posted by watchyourtimeco
This isn't the same thing, though. I don't own one of the DD watches but, correct me if I'm
wrong, doesn't the chronograph hand snap back to zero? The 7750 smoothly resets. This is the
difference. Since it snaps back to zero, there is much more stress on the hand. Doing this 20
times in rapid succession is certainly much more stress than doing it spread out over time.
The V7750 "snaps back instantly" as do all automatic chronographs movements.
__________________
If n = the number of watches you have, then n + 1 = the number of watches you need!
Flyback
Flyback
Flyback
Flyback
#113
Today, 01:08 AM
Bigmac
Senior Member
Senior Geek
Join Date: Feb 2009
Posts: 296
Snappity Snap
The 7750 snaps back.
Bigmac
Bigmac
Bigmac
Bigmac
#114
Today, 01:09 AM
Nismo
Senior Member
Super Geek
Join Date: Jan 2010
Location: Holland, MI
Posts: 2,176
Real Name: John
Quote:
Originally Posted by DenverBuff
....They don't fail en masse like they do here. As Brad said above, they are precision
instruments. If you throw a Maserati engine in a Prius . . . you can't blame the engine if it
doesn't run.
So far, I don't recall this round of DD "failing en mass".
The Maserati Quattroporte and GranTurismo engines are not actually made by Maserati.
Ferrari casts them, machines them, hand assembles them, delivers them to Maserati and then the
engines are fitted by Maserati. (hey.... that sounds familiar).
BTW, You could blame the engine... because the Prius uses a motor. But I digress, just thought
I'd lighten the conversation. Is 2:30 in the morning too late for a coffee break?
__________________
VENOM / SAIV / 350Z / 88 / MGS / threeA / WATCH GEEK
Nismo
Nismo
Nismo
Nismo
#115
Today, 01:16 AM
dvp55
Senior Member
Veteran Geek
Join Date: Mar 2009
Posts: 561
I've never read such hypersensitive and accusatory reactions as I've just read.
Is there a history of bad blood here?
Being a loyal fan is one thing but trouncing someone with out of left field statements like
'purposefully trying to break the watch' and 'stop using profanity' is beyond the pale. There's
barely a day that goes by when someone, here, doesn't use '***' to make a strong point and keep
it polite.
We're adults here.
We get it.
Now as for trying the stopwatch feature in a $800 watch, it had better work 20 times in a row. At
least that.
dvp55
dvp55
dvp55
dvp55
#116
Today, 01:16 AM
nycruza
Senior Member
Super Geek
Join Date: Jan 2009
Location: Las Vegas
Posts: 1,802
Real Name: A.J.
I want everyone to get in their cars.
Now get on a major highway with no traffic and pickup speed to 60 miles per hour.
Once you reach 60, hit your brakes hard!
Now do this 19 more X.
How your brakes working now? Oh, must be defective brakes, right?
What you are not realizing is this is the same type of punishment you are putting your watch
through.
Now enjoy your day.
AJ
__________________
SANIII on the Rocks with a Twist of Lemon
nycruza
nycruza
nycruza
nycruza
#117
Today, 01:19 AM
mdhorner
Senior Member
Master WatchGeek
Join Date: Oct 2009
Location: Chicago, IL
Posts: 3,185
Real Name: Michael
All this debating is not going to sway anyone. People either think it's abuse to work the chrono
20 times in a row, others think it is simply testing the functions.
__________________
A flush always beats a straight unless the guy with the straight
carries a gun. -Norman Chad
mdhorner
mdhorner
mdhorner
mdhorner
#118
Today, 01:20 AM
ky
Senior Member
Senior Geek
Join Date: Mar 2008
Location: City Of Angels via The Windy City
Posts: 413
Quote:
Originally Posted by Flyback
There's a video in another thread that shows the production of a Dubois Depraz module and
how each and every part is electronically checked for tolerances. If anything, they should be
more reliable/durable as the parts are better engineered and better fitted.
One more thing, when Invicta introduced this movement last year, I scoured the web for any
and all bits of information to get myself up to speed on the DD module. There was/is
absolutely no reference anywhere to any susceptibility to slippage or any other defect for the
matter.
I'm wondering, if Invicta is using the same movement everyone else is using then what could be
the problem?
Washer again??? hand size and weight??? dial used???
There has to be a spec on these requirements from DD.
I find it difficult for any company to subject themselves to yet another fiasco like the last time
without dotting their i's and crossing their t's.
But, then again, we shall see...
I still would not reset this particular movement in a manner I consider to be
questionable/excessive...
__________________
ky
ky
ky
ky
#119
Today, 01:22 AM
Flyback
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Northern CA
Posts: 21,935
Real Name: Brad
Quote:
Originally Posted by nycruza
I want everyone to get in their cars.
Now get on a major highway with no traffic and pickup speed to 60 miles per hour.
Once you reach 60, hit your brakes hard!
Now do this 19 more X.
How your brakes working now? Oh, must be defective brakes, right?
What you are not realizing is this is the same type of punishment you are putting your watch
through.
Now enjoy your day.
AJ
Sorry, comparing the heat and energy created and then dissipated in the example you've given is
in no way comparable to resetting a chronograph movement.
__________________
If n = the number of watches you have, then n + 1 = the number of watches you need!
Flyback
Flyback
Flyback
Flyback
#120
Today, 01:31 AM
fxdb10
Senior Member
Senior Geek
Join Date: Jan 2010
Location: oklahoma
Posts: 181
Quote:
Originally Posted by dvp55
I've never read such hypersensitive and accusatory reactions as I've just read.
Is there a history of bad blood here?
Being a loyal fan is one thing but trouncing someone with out of left field statements like
'purposefully trying to break the watch' and 'stop using profanity' is beyond the pale. There's
barely a day that goes by when someone, here, doesn't use '***' to make a strong point and
keep it polite.
We're adults here.
We get it.
Now as for trying the stopwatch feature in a $800 watch, it had better work 20 times in a row.
At least that.
+1
fxdb10
fxdb10
fxdb10
fxdb10
fxdb10
#121
Today, 01:31 AM
Jaydawggy
Senior Member
Senior Geek
Join Date: May 2008
Location: Washington State
Posts: 136
Quote:
Originally Posted by Flyback
Sorry, comparing the heat and energy created and then dissipated in the example you've given
is in no way comparable to resetting a chronograph movement.
I was thinking the exact same thing but didn't want to get started in an argument...?
Jaydawggy
Jaydawggy
Jaydawggy
Jaydawggy
#122
Today, 01:34 AM
steiner
Junior Member
New Geek
Join Date: Dec 2008
Location: San Diego, Ca.
Posts: 21
I'm fairly confident I could activate the chrono feature on any Subaqua or say, Vulcan. brand
new or 5 years old 20 times and they would have no problem.
Is the issue because these DD are too delicate for that much use at a time? (Or Too New) I
thought that's what DD specialized in.
Then why put them in, in the first place? I doubt those original Swiss movements would have
had any problems in those Speedways just by themselves.
I'm just sayimg..
steiner
steiner
steiner
steiner
#123
Today, 01:36 AM
Flyback
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Northern CA
Posts: 21,935
Real Name: Brad
Quote:
Originally Posted by steiner
I'm fairly confident I could activate the chrono feature on any Subaqua or say, Vulcan. brand
new or 5 years old 20 times and they would have no problem.
Is the issue because these DD are too delicate for that much use at a time? (Or Too New) I
thought that's what DD specialized in.
Then why put them in, in the first place? I doubt those original Swiss movements would have
had any problems in those Speedways just by themselves.
I'm just sayimg..
The Dubois Depraz 2021 module is neither new, nor delicate. And yes, this is their specialty.
__________________
If n = the number of watches you have, then n + 1 = the number of watches you need!
Flyback
Flyback
Flyback
Flyback
#124
Today, 01:38 AM
fxdb10
Senior Member
Senior Geek
Join Date: Jan 2010
Location: oklahoma
Posts: 181
Quote:
Originally Posted by Flyback
Sorry, comparing the heat and energy created and then dissipated in the example you've given
is in no way comparable to resetting a chronograph movement.
+1 BRAD YOUR ON A ROLL TONIGHT and the hits just keep coming.
fxdb10
fxdb10
fxdb10
fxdb10
fxdb10
#125
Today, 01:42 AM
Flyback
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Northern CA
Posts: 21,935
Real Name: Brad
Quote:
Originally Posted by fxdb10
+1 BRAD YOUR ON A ROLL TONIGHT and the hits just keep coming.
I'm not sure if it's a roll or not, but I try to analyze things factually and on their merits, which is
what I've been attempting to do here since I decided to chime in.
__________________
If n = the number of watches you have, then n + 1 = the number of watches you need!
steiner
Junior Member
New Geek
Join Date: Dec 2008
Location: San Diego, Ca.
Posts: 21
I refer to the watch being new to the owner not the movement. I'm sure I know they've been
making them for sometime.
Some have said useing the Chrono 20 times was too much to expect and I was curious if it was
because it was a new watch or if the issue was it is too delicate of an instrument to expect that
much stress at one time.?
Or both?
I'm just saying I never read about any other Chrono issues except when a DD movement is
involved.
steiner
steiner
steiner
steiner
#127
Today, 01:50 AM
ky
Senior Member
Senior Geek
Join Date: Mar 2008
Location: City Of Angels via The Windy City
Posts: 413
I've be wearing my black IP since wednesday.
I have run the chrono and reset it in the neiborhood of 7 times during this period and all hands
snap back to 12 exactly.
It is running spot on with 0sec time variance too.
I feel very comfortable with it.
I'm just sayin...
__________________
ky
ky
ky
ky
#128
Today, 01:51 AM
WATCHJAC
Senior Member
True WatchGeek
Join Date: Apr 2009
Location: Portsmouth, New Hampshire
Posts: 6,809
Real Name: Joe
Quote:
Originally Posted by Flyback
I have no way of knowing what the actual mean-time-to-failure would be in an
automatic chronograph movement, but sheer logic tells me that operating one a
mere 20 times in succession should have no impact on it. These are precision
instruments, not Veg-A-Matics. I don't own a watch with the Dubois Depraz 2021
chronograph module, but nonetheless wanted to run a test of my own. I chose my
Philip Watch Sunray chronograph powered by the venerable Valjoux 7750 as it is
one of the older ones I own, which should make it more susceptible to slippage. I
operated the chronograph function in continuous succession from 0 to 15 seconds
followed by an immediate reset for 120 cycles with no adverse effect. The only
reason I stopped was out of boredom and tired fingers. IMHO based on the
unavoidable logic that these things have to be engineered to operate more than
occasionally, there is something amiss with those that are slipping.
I just completed the same test that Brad just did on two different watches and movements although I did not do as many cycles. Here are the watch models movements and number of cycles: Movado Series 800 37 Jewel Swiss ETA 2894.2 (35-cycles) Victorinox Swiss Air Force Air Boss Mach 6 Valjoux 7753 (25-cycles) With no adverse effect! BTW I do feel that this in anyway constitutes any abuse of my timepieces. Although like others here do not use my chrono function that often I do expect that if I need to use it, it should work without issue or limitation. After all these are not dime store watches these are professional timepieces. __________________
"As a dreamer of dreams and a travelin' man, I have chalked up many a mile." Jimmy Buffett
WATCHJAC
WATCHJAC
WATCHJAC
WATCHJAC
#129
Today, 01:59 AM
WATCHJAC
Senior Member
True WatchGeek
Join Date: Apr 2009
Location: Portsmouth, New Hampshire
Posts: 6,809
Real Name: Joe
Quote:
Originally Posted by Flyback
Sorry, comparing the heat and energy created and then dissipated in the example you've given
is in no way comparable to resetting a chronograph movement.
Thank you Brad for being the voice of reason.
__________________
"As a dreamer of dreams and a travelin' man, I have chalked up many a mile." Jimmy Buffett
WATCHJAC
WATCHJAC
WATCHJAC
WATCHJAC
#130
Today, 02:02 AM
Flyback
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Northern CA
Posts: 21,935
Real Name: Brad
Quote:
Originally Posted by steiner
I refer to the watch being new to the owner not the movement. I'm sure I know they've been
making them for sometime.
Some have said useing the Chrono 20 times was too much to expect and I was curious if it was
because it was a new watch or if the issue was it is too delicate of an instrument to expect that
much stress at one time.?
Or both?
I'm just saying I never read about any other Chrono issues except when a DD movement is
involved.
No one here is a watchmaker or engineer for Dubois Depraz, so everything we postulate is open
to question. That said, it's my considered opinion, that cycling this or any chronograph
movement isn't abuse and would likely fall within the norms of expected use for someone who
times industrial or other cycles. Several comments above from those who use chronographs in a
work environment support that.
Going back to what I remember of my physics classes, F = m * a, or force equals mass times
acceleration. The mass of the chronograph hand is minuscule and the short distance it travels
over part of the circumference of the dial doesn't allow for much acceleration either. To provide
damping for the return of the hand to it's starting point given the tiny amount of energy involved
I'm sure is quite simple. It just doesn't follow that even rapid cycling of the movement would be
detrimental. In my example in post #84 using a V7750 I ran it trough 120 repeated cycles
without issue.
__________________
If n = the number of watches you have, then n + 1 = the number of watches you need!
Flyback
Flyback
Flyback
Flyback
#131
Today, 02:30 AM
Flyback
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Northern CA
Posts: 21,935
Real Name: Brad
Quote:
Originally Posted by WATCHJAC
I just completed the same test that Brad just did on two different watches and movements although I did not do as many cycles. Here are the watch models movements and number of cycles: Movado Series 800 37 Jewel Swiss ETA 2894.2 (35-cycles) Victorinox Swiss Air Force Air Boss Mach 6 Valjoux 7753 (25-cycles) With no adverse effect! BTW I do feel that this in anyway constitutes any abuse of my timepieces. Although like others here do not use my chrono function that often I do expect that if I need to use it, it should work without issue or limitation. After all these are not dime store watches these are professional timepieces.
Good to see some aligned thinking here Joe.
__________________
If n = the number of watches you have, then n + 1 = the number of watches you need!
Flyback
Flyback
Flyback
Flyback
#132
Today, 02:39 AM
nevamine
Senior Member
Veteran Geek
Join Date: Jun 2009
Location: Upcountry Maui
Posts: 587
Real Name: Bruno
I have used my chronos a lot and things are just fine, but I can see how easy it would be for
something to go wrong would be with all the complications inside. I don't think that anyone
company's policy is to monitor their product for that long,OH wait a second, I do remember one
that does a running test for one year and they are really nice watches and really expensive too
and your avatar looks like the one I'm thinking of. Stay with what works for you and you should
be fine. Sorry your new Invicta was a defect , that's unfortunate.
__________________
Lets go fishin and
nevamine
nevamine
nevamine
nevamine
nevamine
#133
Today, 02:43 AM
watchyourtimeco
Senior Member
Veteran Geek
Join Date: Oct 2010
Location: Raleigh, NC
Posts: 672
Real Name: Tim
Quote:
Originally Posted by Flyback
No one here is a watchmaker or engineer for Dubois Depraz, so everything we postulate is
open to question. That said, it's my considered opinion, that cycling this or any chronograph
movement isn't abuse and would likely fall within the norms of expected use for someone who
times industrial or other cycles. Several comments above from those who use chronographs in
a work environment support that.
Going back to what I remember of my physics classes, F = m * a, or force equals mass times
acceleration. The mass of the chronograph hand is minuscule and the short distance it travels
over part of the circumference of the dial doesn't allow for much acceleration either. To
provide damping for the return of the hand to it's starting point given the tiny amount of
energy involved I'm sure is quite simple. It just doesn't follow that even rapid cycling of the
movement would be detrimental. In my example in post #84 using a V7750 I ran it trough 120
repeated cycles without issue.
I stand corrected on the hand snapping back on the Valjoux and, as such, I accept the test on the
7750 being the same as the test on the DD. That said, I still would not subject any of my
watches, automatic or quartz, to the repetitive starting, stopping, and resetting the OP did and
call it anything less than abuse. Since I have no facts to back this up, I admit it is merely my
opinion and, as I am not a watch maker, an uneducated opinion as well. I can't see the starting,
stopping, resetting, and pushing of the pushers with such frequent rapidity as testing. As Nick
said, when I get a watch in and after I inspect it thoroughly, I will test the chronograph feature
by starting it and letting run for 30 seconds. After the first 30 second cycle I will reset it and start
it again, letting it run for 2 minutes, pushing the bottom button to make sure the lap timing is
working, before stopping it and resetting it again. I go one step farther than Nick, especially with
the 5050E movements with the 12 hour timer, and I will then let it run for just over an hour
before stopping it again and resetting it. If the chronograph hand returns to zero in each case, I
deem the watch is functioning properly and stick it in the collection.
My question now is:
Why would anyone want to do any further testing on a chronograph watch than what I just
described? If it works correctly in each of the 3 tests, why would anyone want to continue to
"test" it? To me, after such a test shows the watch to be performing as designed, any further
testing is not to see if it is functioning but, rather, it is to see if it can be broken.
__________________
They call me..............................Tim?
watchyourtimeco
watchyourtimeco
watchyourtimeco
watchyourtimeco
watchyourtimeco
#134
Today, 02:49 AM
Flyback
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Northern CA
Posts: 21,935
Real Name: Brad
Quote:
Originally Posted by watchyourtimeco
My question now is:
Why would anyone want to do any further testing on a chronograph watch than what I just
described? If it works correctly in each of the 3 tests, why would anyone want to continue to
"test" it? To me, after such a test shows the watch to be performing as designed, any further
testing is not to see if it is functioning but, rather, it is to see if it can be broken.
In regards to this watch and movement, the first run last year had a "slippage" problem that
wasn't necessarily evident on first use. So if I were to pick one up from the new release, I would
want to make "very sure" that mine was not so affected, which would necessarily mandate more
aggressive testing. As to seeing if the watch can be broken, as I've commented above in some
detail, utilizing a properly engineered device for it's intended purpose should not cause any
damage.
__________________
If n = the number of watches you have, then n + 1 = the number of watches you need!
Flyback
Flyback
Flyback
Flyback
#135
Today, 03:20 AM
ky
Senior Member
Senior Geek
Join Date: Mar 2008
Location: City Of Angels via The Windy City
Posts: 413
Quote:
Originally Posted by Flyback
In regards to this watch and movement, the first run last year had a "slippage" problem. So if I
were to pick one up from the new release, I would want to make "very sure" that mine was not
so affected, which would necessarily mandate more aggressive testing. As to seeing if the
watch can be broken, as I've commented above in some detail, utilizing a properly engineered
device for it's intended purpose should not cause any damage.
In all due respect to everyone on the fence.
I bought all 3 models in the original run last year.
It was much more obvious as to the chrono reset slippage on all 3 versions I had.
They went back to shop as they should have. And I was not interested in getting them back.
I did the exact same checks on the 3 versions I picked up this time around.
They passed my personal checks with flying colors.
I did not need to do 20 consecutive resets at all. If the slippage problem was still prevalent, I believe it would have taken no
more than 5 resets to see it. Anything well beyond that continuously is over-the-top to me…IMO...
Basically, I agree to disagree with many on this one.
I would be curious to here Jim and Mike's take on this subject.
Jim said on his show that you should not continuously run your chronographs, even on
automatics.
I still don't get this one because I think if you are wearing it, why should it matter?
It's an automatic...
__________________
ky
ky
ky
ky
#136
Today, 03:26 AM
oldindiantrick
Senior Member
Senior Geek
Join Date: Apr 2010
Location: Longbeach
Posts: 216
Real Name: Ken
Since I started readig this thread I have cycled my 2 new DD s at least 20 times ,
and cycled my 2 DD s from the last run at least 20 times.All 4 still look and run as perfectly as
the day I got them...Ken
oldindiantrick
oldindiantrick
oldindiantrick
oldindiantrick
oldindiantrick
#137
Today, 03:31 AM
watchyourtimeco
Senior Member
Veteran Geek
Join Date: Oct 2010
Location: Raleigh, NC
Posts: 672
Real Name: Tim
Quote:
Originally Posted by Flyback
In regards to this watch and movement, the first run last year had a "slippage" problem that
wasn't necessarily evident on first use. So if I were to pick one up from the new release, I
would want to make "very sure" that mine was not so affected, which would necessarily
mandate more aggressive testing. As to seeing if the watch can be broken, as I've commented
above in some detail, utilizing a properly engineered device for it's intended purpose should
not cause any damage.
So, was that determined to be a design flaw or production flaw? I'm still fuzzy here as to where
the blame lay. Granted, Invicta will ultimately be the one to make the defective pieces right but,
is it a problem from DD or a problem from Invicta?
__________________
They call me..............................Tim?
watchyourtimeco
watchyourtimeco
watchyourtimeco
watchyourtimeco
watchyourtimeco
#138
Today, 03:38 AM
ky
Senior Member
Senior Geek
Join Date: Mar 2008
Location: City Of Angels via The Windy City
Posts: 413
Quote:
Originally Posted by watchyourtimeco
So, was that determined to be a design flaw or production flaw? I'm still fuzzy here as to where
the blame lay. Granted, Invicta will ultimately be the one to make the defective pieces right
but, is it a problem from DD or a problem from Invicta?
Here's the official explanation given to us on the previous models...
http://watchgeeks.net/showthread.php?t=113701
__________________
ky
ky
ky
ky
#139
Today, 04:37 AM
timeman
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Long Island, New York
Posts: 6,295
Real Name: Jerry
Eyal, TeamInvicta, DD or all parties need to comment on this and explain what's the reason for
this, and what steps are being taken to correct the alleged malfunctions.
__________________
timeman
timeman
timeman
timeman
#140
Today, 04:53 AM
JoeGa
Senior Member
Super Geek
Join Date: Jul 2008
Location: Atlanta, Georgia
Posts: 2,288
Real Name: Joe T
FWIW...I'm as big a skeptic as they come, and I wasn't overly impressed w/ my out of the box
experience on this one. I think I was the first to comment on the loose screws in the case back.
I didn't buy the first run last time, and watched in disgust as all those the watches started failing.
However, once that mess was ironed out, I was pretty confident Invicta and Eyal wouldn't let
that happen again. So with this release, I felt pretty good about jumping in.
Over the past 2 days, I have put mine through the paces. It has been dead on accurate for over
36 hours, in many positions and being worn. Amazing to me. I have run the chrono probably
30 to 40 times, for different lengths of time and reset from both sides of 30 seconds...zeros every
time.
Thus far it seems like every bit the quality Swiss piece I expected this time around. That said, I
do not doubt some are having issues, and my gut tells me the rough shipping didn't help. But if
there is a systemic problem, it will be revealed and handled. If not, the 5 year warranty gives me
some piece of mind, (even tho' it may take 6 months to get it back... )
I am not an Invicta groupie, and do think it's not the same Invicta of a few years ago when IMO
overall quality was better. But still, where can you find a Swiss DD movement for the money we
spent on these? It was worth a shot IMO. And at least for me, so far, so good. Hope I didn't jinx
myself...
__________________
What ?!? No Watch ?!?
JoeGa
JoeGa
JoeGa
JoeGa
JoeGa
#141
Today, 05:05 AM
the lip
Senior Member
Senior Geek
Join Date: Apr 2010
Location: IL
Posts: 173
Real Name: Steve
Quote:
Originally Posted by BG
Either send it back for a refund, or and exchange.. Sounds like you've got a defective one, and
since the module was put onto the movement by DD, I'm wondering about how they were
shipped to Invicta from their factory to be placed into the watches...Not sure where this went
wrong, but I would not hesitate to exchange...
Have had mine 24 hours and set to atomic clock and so far it's perfect, not even 1 second off..
Ran the Chrono about an hour, reset perfectly..
Guys I know a couple of people have mentioned this, but DD does not affix the module to the
movement. Contact DD (as I did) and you will learn more. Neither bad or good just accurate
information.
the lip
the lip
the lip
the lip
#142
Today, 05:10 AM
TomRaz
Senior Member
Senior Geek
Join Date: Mar 2009
Location: Seminole, FL.
Posts: 402
Real Name: Tom
Does it really matter what model failed after 20 resets ?
If I purchased a inexpensive watch that had an automatic movement and ran the chrono and then
hit the stop and reset I would expect it to work.
Isn't that why the pushers are there ?
Being that the DD movement had various issues surrounding it last year I would expect Invicta
to go the extra mile to ensure this years offering was without issues.
I truly do not understand why people at this site jump on someone for their posting. I guess we
could just have a website for watch geeks that had unicorns and rainbows and we all felt really
good about our purchases.
As long as someone expresses their issue without using bad language why don't you all work on
not flaming someone for their opinions ?
If I had purchased this watch and had these issues I would be expressing my frustration as well.
The ETA movement with the DD on is suppose to be a very high end combination. I remember
one post comparing this combination to a rolex and how the invicta offering was over $10k
cheaper.
So in my opinion this watch offering was one of the higher end offerings and should perform
better than the average watch.
The amount of money that this watch costs should equal it's performance !
TomRaz
TomRaz
TomRaz
TomRaz
#143
Today, 05:15 AM
FrankV
Senior Member
Veteran Geek
Join Date: Jan 2010
Location: New York
Posts: 987
Real Name: Frank
Quote:
Originally Posted by Leed24
First off let me say, sorry to hear of your Speedway problem. However, how often do you use
the stopwatch functions 20 times in a row like that ? Someone tells you to run your chrono 20
times in a row to see if it breaks and then when it does your mad ? I recommend that you drop
it 20 times on the counter to test its shock resistance properties. If your using your stopwatch
that often buy a cheap digital. Spare us your profanity on this website.
Boy that is a bunch of bull if I ever heard some. Dropping your watch and using it as it was
designed to do is two totally different things.The watch has a chrono and it should work
properly. If I want to use it once or fifty times that is my choice.
__________________
CHOOSE TODAY WHOM YOU WILL SERVE...AS FOR ME AND MY HOUSE
WE WILL SERVE THE LORD
FrankV
FrankV
FrankV
FrankV
#144
Today, 05:35 AM
Mike_NavyNuke
Senior Member
Super Geek
Join Date: Jan 2010
Location: Norfolk VA
Posts: 2,188
Real Name: Mike
Quote:
Originally Posted by Leed24
First off let me say, sorry to hear of your Speedway problem. However, how often do you use
the stopwatch functions 20 times in a row like that ? Someone tells you to run your chrono 20
times in a row to see if it breaks and then when it does your mad ? I recommend that you drop
it 20 times on the counter to test its shock resistance properties. If your using your stopwatch
that often buy a cheap digital. Spare us your profanity on this website.
Got to disagree with you on this one.
I have used my S.W.I. LE 7750 Chronograph at least 20 times, in the last 2 months. If not 20
times, it could be twice that. I time things I probably shouldn't even be timing (like using the
bathroom )
Never had an issue, and I feel that if a watch includes a chronograph then it should be able to
handle thousands upon thousands of resets.
I work in the Nuclear Engineering industry and I am aware that even well made products have a
typically a limited number of uses to it; but in this case 20 uses is in no way should be a
problem.
As for doing it 20 times in a ROW, it doesn't matter if they were right after each other or spread
days apart....The hands should not be loose enough to cause movement here.
__________________
Mike_NavyNuke
Mike_NavyNuke
Mike_NavyNuke
Mike_NavyNuke
#145
Today, 05:59 AM
curiousgeorge
Senior Member
Master WatchGeek
Join Date: Apr 2009
Location: Mpls
Posts: 3,123
Real Name: George
Quote:
Originally Posted by nycruza
I want everyone to get in their cars.
Now get on a major highway with no traffic and pickup speed to 60 miles per hour.
Once you reach 60, hit your brakes hard!
Now do this 19 more X.
How your brakes working now? Oh, must be defective brakes, right?
What you are not realizing is this is the same type of punishment you are putting your watch
through.
Now enjoy your day.
AJ
Didn't you start a thread last year on how to constantly run your auto chrono as a second time
zone. How many people actually do that and wouldn't it be outside the norm for use or does it in
fact function the way it should properly. My guess is it functioned properly. I don't own one of
these dd yet, but if I did I would expect it to work as advertised. If not I would send it back.
Pretty simple. I tried running and stopping a 3 year old android mechanical chrono(Seagull) with
a snapback. 20 times, resets every time. I think Chief is onto to something with the shipping.
These plasticases do not hold the watch in place. I suggested to invicta before to pre-cut the top
half of the foam casing to pre-fit the watch to reduce shipping punishment. plus use a stronger
foam. Being a postal worker 23 years I know what kind of abuse your packages get. When
invicta was having a problem with the hands falling off the Oceanquest they were being shipped
in this manner. Might not be the problem, but it would eliminate quite a few others.
curiousgeorge
curiousgeorge
curiousgeorge
curiousgeorge
#146
Today, 05:59 AM
rgmb2
Senior Member
Senior Geek
Join Date: Jun 2008
Location: Chicago
Posts: 357
Real Name: Mike
Quote:
Originally Posted by nycruza
I want everyone to get in their cars.
Now get on a major highway with no traffic and pickup speed to 60 miles per hour.
Once you reach 60, hit your brakes hard!
Now do this 19 more X.
How your brakes working now? Oh, must be defective brakes, right?
What you are not realizing is this is the same type of punishment you are putting your watch
through.
Now enjoy your day.
AJ
Actually that is pretty close to how you are supposed to bed brakes in. I think Zeckenhausen has
a good article on this.
__________________
Even the wall clocks are better in Europe.
Last edited by rgmb2; Today at 06:20 AM. Reason: Typo
rgmb2
rgmb2
rgmb2
rgmb2
#147
Today, 06:12 AM
rgmb2
Senior Member
Senior Geek
Join Date: Jun 2008
Location: Chicago
Posts: 357
Real Name: Mike
Quote:
Originally Posted by timeman
Eyal, TeamInvicta, DD or all parties need to comment on this and explain what's the reason
for this, and what steps are being taken to correct the alleged malfunctions.
No, they really don't. And just because people on this forum whine does not mean they are
entitled to manufacturers responding to them. Stop buying watch brands that fail if this is a
problem for you. I'm starting to think that the some of the credibility gap between this forum and
some other watch forums is partly the number of uninformed comments that pervade these
threads versus the perception of lower quality time pieces. For what it's worth, the Omega
Coaxial movement which costs a bit more than this DD movement had a terrible chrono flaw in
it where by operating the reset pusher before stopping the chrono would result in a broken
chrono - either constantly running or not working at all. Not only did the CEO not come out with
a personal statement, but most of the repairs were done at the owners' expense as watches were
out of warranty - $650 bucks at your local authorized Omega repair shop if you're curious. Was I
pissed, yes. Did I expect a statement...no. Should a chrono break by pushing the reset pusher
before it is stopped, no. Should it break after twenty repeated uses....no. The good news here is if
you have a broken watch or are worried, send the damn thing back, and select a different brand.
We need to start elevating these discussions.....they are getting old.
__________________
Even the wall clocks are better in Europe.
rgmb2
rgmb2
rgmb2
rgmb2
#148
Today, 06:15 AM
numiswatchrocker
Senior Member
Senior Geek
Join Date: Dec 2009
Posts: 118
I JUST DON'T GET WHATS GOING ON IN THIS FORUM. I RECEIVED THE FIRST
D/D SPEEDWAY LAST YEAR . I TRIED THE CHRONO 2-3 TIMES AND IT WORKED
PERFECT. I CHECKED THE WATCH OUT LIKE I ALWAYS DID FOR YEARS,FOR
DEFECTS AND THAT IT ALL WORKED OK. IT STILL WORKS PERFECT TODAY. I
JUST RECEIVED THE NEW D/D IN SILVER. DID MY SAME CHRONO CHECK 2-3
TIMES, EVERYTHING RUNS GOOD. I THINK SOME PEOPLE ARE LOOKING FOR
PROBLEMS,AND OVER ANALISE THE WATCH. IF YOU LOOK AT ANYTHING LONG
AND HARD ENOUGH YOU ARE BOUND TO FIND SOMETHING WRONG.(EVEN
ROLEX, OMEGA ETC HAS PROBLEMS,THEY ARE NOT TALKED ABOUT,AT LEAST
ON THIS FORUM.) IF THE WATCH LOOKS GOOD FEELS GOOD AND KEEPS GOOD
TIME,WEAR IT ENJOY IT AND MOVE ON.THIS FORUM IS SUPPOSE TO BE FOR
WATCH LOVERS. SURE THERE ARE SOME PROBLEMS WITH SOME WATCHES.
NOTHING MECHANICAL IS PERFECT. AND YES SOME PROBLEMS ARE VALID,BUT
DON'T OVERKILL THE SITUATION WHERE A POTENTIAL WATCH BUYER WILL BE
SO DISCOURAGED FROM WHAT HE OR SHE HEARS ON THIS FORUM,THAT THEY
WILL BE AFRAID TO BUY ANY WATCH!
numiswatchrocker
numiswatchrocker
numiswatchrocker
numiswatchrocker
numiswatchrocker
#149
Today, 06:21 AM
FRANCHESCO236
Senior Member
Veteran Geek
Join Date: Jan 2009
Location: quebradillas, puerto rico
Posts: 637
Real Name: RICHARD
still waiting for mine to arrive. after reading these comments i am wondering how many have
failed, out of how many recd. i would guess that around 400 were sold. if we are talking about 1
or 2 failing after abusive test being run i am not overly concerned. however after reading this
thread i would think the watch is a disaster. it makes you almost think that some of our fellow
geeks go after invicta for their joy of it. how many complain of the watch without ever owning
it.
FRANCHESCO236
FRANCHESCO236
FRANCHESCO236
FRANCHESCO236
FRANCHESCO236
#150
Today, 06:24 AM
Mike_NavyNuke
Senior Member
Super Geek
Join Date: Jan 2010
Location: Norfolk VA
Posts: 2,188
Real Name: Mike
Quote:
Originally Posted by nycruza
I want everyone to get in their cars.
Now get on a major highway with no traffic and pickup speed to 60 miles per hour.
Once you reach 60, hit your brakes hard!
Now do this 19 more X.
How your brakes working now? Oh, must be defective brakes, right?
What you are not realizing is this is the same type of punishment you are putting your watch
through.
Now enjoy your day.
AJ
I don't think that is a fair comparison at all. Brakes are not designed to perform those 60mph-
>0mph hard stops 20 times over and over, they are designed for a few though. Plus they are
wearable items to begin with. Plus they are designed for quick easy cheap replacement; and they
are not covered under warranty because of the wear they receive.
These automatic chronographs are not a 'use 20 times then replace' item, and should never be
considered as such. No one EVER would buy a $700 watch if it only worked 20 times before
needing big $$$ service. Using your logic, it is acceptable for a watch to cost ($700/20) $35
PER CHRONOGRAPH RUN plus repair costs. Doesn't make sense. Don't pee on my leg and
tell me its raining.
Maybe a better comparison would be, to get in your car, and turn on the windshield wipers ON
and OFF 20 times in a row...see if they still are aligned correctly and work! I am sure they will,
and if not i would fully expect that you would be at the dealer to get a free replacement.
I have used many chronographs all the time and never yet experienced this issue. It is not
normal, and even if the culprit is a loose hand, it is a design flaw and not part of 'normal use'
Enjoy your day.
_________________
MATTNATTI
Senior Member
Master WatchGeek
Join Date: Apr 2010
Location: Ohio
Posts: 2,753
My black ip is running with spot on time and I operate the chrono a couple of times each night
after work and everything reseta to zero as it should. Having said that I have not sized it yet and
will probably send it back soon...it just is not blowing my mind. It is a nice movement and the
best in my collection but since I reserved a meg 3 yesterday the speedway will be going back
because the meg DOES blow my mind every time I put one of them on.
The speedway is a nice watch but there is something telling me to send it back.
__________________
DEATH IN THE NIGHT AC-130U GUNSHIP
(SPOOKY)......protecting soldiers and hunting bad guys in all of the hot spots around the world.
MATTNATTI
MATTNATTI
MATTNATTI
MATTNATTI
#152
Today, 06:28 AM
biggpoppa1
Senior Member
Senior Geek
Join Date: May 2009
Location: Indian Trail, N.C.
Posts: 231
Real Name: Bill
Quote:
Originally Posted by fxdb10
+1
+1
__________________
Anything that contradicts experience and logic should be abandoned.
biggpoppa1
biggpoppa1
biggpoppa1
biggpoppa1
biggpoppa1
#153
Today, 06:29 AM
unclefixit
Senior Member
Super Geek
Join Date: Mar 2008
Location: Universal City, Texas (N.E. of San
Antonio)
Posts: 1,923
Real Name: Jay
What many have missed is this...
The movement is not defective, as it can be started and stopped.
What appears to be happening here is the chronograph hand is slipping on its pinion shaft.
This same problem was exhibited on the first Speedway DD Reserves and it was noted that
the hands and dails used on that first Speedway DD run of watches were not manufactured
to the production specs by the SUBCONTRACTER.
These were the findings of Dubois Depraz after their inspections.
So what I guess we're begining (maybe) to see here is a similar problem with an easy I
would think fix.
Cut loose the current supplier of hands and find a better vendor for these parts.
I truly hope it turns out to be this simple.
unclefixit
unclefixit
unclefixit
unclefixit
#154
Today, 06:31 AM
rgmb2
Senior Member
Senior Geek
Join Date: Jun 2008
Location: Chicago
Posts: 357
Real Name: Mike
Quote:
Originally Posted by unclefixit
What many have missed is this...
The movement is not defective, as it can be started and stopped.
What appears to be happening here is the chronograph hand is slipping on its pinion shaft.
This same problem was exhibited on the first Speedway DD Reserves and it was noted that
the hands and dails used on that first Speedway DD run of watches were not manufactured
to the production specs by the SUBCONTRACTER.
These were the findings of Dubois Depraz after their inspections.
So what I guess we're begining (maybe) to see here is a similar problem with an easy I
would think fix.
Cut loose the current supplier of hands and find a better vendor for these parts.
I truly hope it turns out to be this simple.
If something needs to be fixed in a new time piece, how is that not a "defect?"
__________________
Even the wall clocks are better in Europe.
rgmb2
rgmb2
rgmb2
rgmb2
#155
Today, 06:32 AM
rangerdavid
Member
Member Geek
Join Date: Dec 2010
Posts: 32
Quote:
Originally Posted by NCEngineer
When they market relatively small batches of a specific "high end"
Invicta watch (as in this case), the QC should be beyond reproach.
I just can't imagine a company that doesn't treat its customers any better than this would stay in
business long. How can improving CS not be on their corporate development plan?
It would be a really nice thing if these forums would provide a "direct line" to expedite repairs
and correct issues such as this since most people may own or gift one Invicta for a special
occasion, but we all own dozens. Actually, we probably sell hundreds too when others see and
inquire about our watches.
But who knows. I'm sorry the OP had such a terrible time with a fairly expensive purchase. I
would be upset too.
All the best,
RD
rangerdavid
rangerdavid
rangerdavid
rangerdavid
#156
Today, 06:41 AM
jlovesseconds
Senior Member
Master WatchGeek
Join Date: Jun 2009
Location: durham nc.
Posts: 4,091
Real Name: joe
Quote:
Originally Posted by NCEngineer
After having similar frustration with Invicta, I took a hiatus from purchasing from them for what is about two years now. It was not
a bad thing as I discovered a few things during that time. One, I discovered brands like NFW, Android and even Stuhrling and found
that their CS was like no other (NFW wins, hands down, in the QC and CS department).
Also, I found that I truly loved the Invictas that I already had - Reserve models from 2003 - 2007. In fact, I'm hunting down
Invicta Reserves from that era right now.
Invicta is at its consistent best in the $200 - $400 price point (my
opinion); even today. But, I would not purchase from them ever again until they clean up issues like this. When they market
relatively small batches of a specific "high end" Invicta watch (as in this case), the QC should be beyond reproach.
I don't bash the brand itself because I honestly have enjoyed some
truly awesome Invicta works-of-art, at a relatively low cost and tremendous value. But, I do cringe at seeing reports of chrono
hands not lining-up, or of bezels not lining up, etc, when it's a highly touted Invicta watch such as this. Invicta has an incredible
impact in the watch industry; I just want them to live up to their potential. When I wear one of their creations, I'm not just wearing
something I purchased at a great value, I'm also wearing a certain legacy and reputation that can only truly be earned and
established by Invicta itself, and I hate it when they fall short.
I hope it gets better. In the end, you can send it back to Invicta for a warranty repair and get to wear that awesome watch in the
future.
why the big print?,don't see how you can say which has the best qc and has nothing to do with
this thread,i guess you just really,really want to get your point across,jmo
__________________
jlovesseconds
jlovesseconds
jlovesseconds
jlovesseconds
jlovesseconds
#157
Today, 06:43 AM
unclefixit
Senior Member
Super Geek
Join Date: Mar 2008
Location: Universal City, Texas (N.E. of San
Antonio)
Posts: 1,923
Real Name: Jay
Quote:
Originally Posted by rgmb2
If something needs to be fixed in a new time piece, how is that not a "defect?"
I should have been clearier.
The OP's watch is yes defective...what he is experiencing should not be happening.
But the blame is being placed improperly on the movement.
As it was on the first Speedway DD's and later found to a production/assymblly issue...out
of spec vendor supplied parts.
unclefixit
unclefixit
unclefixit
unclefixit
#158
Today, 06:44 AM
Mike_NavyNuke
Senior Member
Super Geek
Join Date: Jan 2010
Location: Norfolk VA
Posts: 2,188
Real Name: Mike
Quote:
Originally Posted by rgmb2
If something needs to be fixed in a new time piece, how is that not a "defect?"
I think he was saying that specifically the movement itself is not defective, but the way the
hands/pinions were applied by Invicta. Could be the hand wasn't designed tight enough.
__________________
Mike_NavyNuke
Mike_NavyNuke
Mike_NavyNuke
Mike_NavyNuke
#159
Today, 06:46 AM
soberdave09
Senior Member
True WatchGeek
Join Date: Sep 2009
Location: philadelphia
Posts: 6,391
Real Name: david b.
these threads just get funnier & funnier.LOL.i myself would not run it 20 times.that being
said,it should reset perfectly everytime. __________________
soberdave09
soberdave09
soberdave09
soberdave09
soberdave09
#160
Today, 06:47 AM
NCEngineer
Senior
Member
Senior Geek
Join Date: Jun 2010
Location: Currently, North Carolina. But, I travel worldwide
as part of my job.
Posts: 289
Quote:
Originally Posted by rangerdavid
I just can't imagine a company that doesn't treat its customers any better than this would stay
in business long. How can improving CS not be on their corporate development plan?
It would be a really nice thing if these forums would provide a "direct line" to expedite repairs
and correct issues such as this since most people may own or gift one Invicta for a special
occasion, but we all own dozens. Actually, we probably sell hundreds too when others see and
inquire about our watches.
But who knows. I'm sorry the OP had such a terrible time with a fairly expensive purchase. I
would be upset too.
All the best,
RD
Hey Ranger (actually reminds me of how my instructors would call to me in Ranger
School),
This forum does, on occassion, provide a direct line to the CEO of Invicta, the owner of
Android, NFW and Stuhrling.
Whatever the reason for the specific failure of the OP's time piece, I hope it gets resolved
appropriately to a reasonable level of satisfaction.
There is certainly a lot of chest thumping around here - especially on topics such as this -
but, it's usually just "white noise/background noise" and should just be tuned out.
NCEngineer
NCEngineer
NCEngineer
NCEngineer
#161
Today, 06:51 AM
unclefixit
Senior Member
Super Geek
Join Date: Mar 2008
Location: Universal City, Texas (N.E. of San
Antonio)
Posts: 1,923
Real Name: Jay
Quote:
Originally Posted by Mike_NavyNuke
I think he was saying that specifically the movement itself is not defective, but the way the
hands/pinions were applied by Invicta. Could be the hand wasn't designed tight enough.
Bingo
unclefixit
unclefixit
unclefixit
unclefixit
#162
Today, 06:53 AM
mrblue
Senior Member
Master WatchGeek
Join Date: Apr 2009
Posts: 4,172
I'm getting a sense that it is shipping by 'snbc' that is creating the problem. As well,
and I really do not know, but my sense is ...
Somewhere between the module and the connection to the 2892 is a serious issue. I could be
wrong, but this is the sense that I'm getting. I doubt it's anything DD did, and, I agree w/Chief
that these had to be tested and approved before shipping from Invicta.
Something is causing these to fail between the time it leaves snbc and gets to the
customer.
There has to be a 'weakly' engineered component part somewhere in this equation and
would not discount "WatchYouThink's" being an engineer.
Whatever it is, I also think it may be nonrelated to the prior issue on the first released DD's.
I'm retiscent to accept my package today and may refuse it. The last thing I need is
to be worrying moment to moment about a functioning element of a watch like this.
I'd like a DD in the stable, but may wait until one is made which has a better track record of
reports from owners.
To those who received a good one, they are probably going to be fine. I also don't think that
starting and stopping a chrono should break the watch, unless, as stated above, something is
'weak' in the connection between the movement and module which needs
to be fixed. I am sure Invicta will respond soon to this issue w/a post from them.
I also think they are probably analysing this. I don't believe they would ship them knowing that
it would start this all over again.
I'll be listening for their report.
MB
mrblue
mrblue
mrblue
mrblue
#163
Today, 06:57 AM
NCEngineer
Senior
Member
Senior Geek
Join Date: Jun 2010
Location: Currently, North Carolina. But, I travel worldwide
as part of my job.
Posts: 289
Quote:
Originally Posted by jlovesseconds
why the big print?,don't see how you can say which has the best qc and has nothing to do with
this thread,i guess you just really,really want to get your point across,jmo
You are certainly welcome to your opinion; thanks for sharing it with us.
It's ironic, however, how your post attempts to point out how it has nothing to do with this
thread. Did you read your own post? Does IT have anything to do with this thread?
Anyway, back to the original subject of the thread: a defective watch...
NCEngineer
NCEngineer
NCEngineer
NCEngineer
#164
Today, 06:58 AM
HeavyChevy
Senior Member
Super Geek
Join Date: Mar 2008
Location: Michiana
Posts: 1,715
Real Name: Bruce
I'm kinda amazed at all the folks who so readily jumped down the OP's throat at the start
of this "discussion," but have been so quiet following Brad's well-reasoned, well-thought-
out — and well-documented — posts...
HeavyChevy
HeavyChevy
HeavyChevy
HeavyChevy
HeavyChevy
#165
Today, 07:04 AM
Ronko Man
Senior Member
Master WatchGeek
Join Date: Feb 2009
Location: Long Island, NY
Posts: 2,624
Real Name: Doug
Sorry to hear about your hands not aligning properly for you.
I have the 1st version & I also had the problem with the hand situation, however I am not a
stupid person or let my anger cloud my judgement, as for the price my thought was I'll send it
back & try again.
Well the replacement No. 640/800 has been working like a champ & as some know is spot on
with the accuracy, then including the fact of it's classy, elegent look & fit for my wrists, I would
consider trying again & get a replacement or repair.
__________________
Ronko Man
Ronko Man
Ronko Man
Ronko Man
Ronko Man
#166
Today, 07:19 AM
Krazy
Senior Member
Veteran Geek
Join Date: Dec 2009
Location: Pa
Posts: 635
Real Name: Jr
Quote:
Originally Posted by Flyback
I have no way of knowing what the actual mean-time-to-failure would be in an
automatic chronograph movement, but sheer logic tells me that operating one a
mere 20 times in succession should have no impact on it. These are precision
instruments, not Veg-A-Matics. I don't own a watch with the Dubois Depraz 2021
chronograph module, but nonetheless wanted to run a test of my own. I chose my
Philip Watch Sunray chronograph powered by the venerable Valjoux 7750 as it is
one of the older ones I own, which should make it more susceptible to slippage. I
operated the chronograph function in continuous succession from 0 to 15 seconds
followed by an immediate reset for 120 cycles with no adverse effect. The only
reason I stopped was out of boredom and tired fingers. IMHO based on the
unavoidable logic that these things have to be engineered to operate more than
occasionally, there is something amiss with those that are slipping.
Finally the voice of reason!!!
Krazy
Krazy
Krazy
Krazy
#167
Today, 07:26 AM
Krazy
Senior Member
Veteran Geek
Join Date: Dec 2009
Location: Pa
Posts: 635
Real Name: Jr
Another thing that my play in this is the 40 assembled by "other" as I think Eyal said. My take
on this hands deal that Invicta is having such a fiasco with many of their watches is the material
their made of is either too hard or soft to stay locked on shaft so back to the supplier Eyal uses is
my guess!
Krazy
Krazy
Krazy
Krazy
#168
Today, 07:26 AM
ziggy10
Senior Member
Senior Geek
Join Date: May 2010
Location: Ct
Posts: 187
Real Name: Tom
Quote:
Originally Posted by ky
I understand your point.
But do you by a new sports car and run out and drive it 175 mph without giving it a chance to get broken in first?
We are not talking about a digital watch here BTW...
We are talking about a fine movement.
Who said it was okay to reset this type of movement 20 consecutive times.
It just sounds really odd to me...
Did it reset the first 10 times okay and someone wanted to keep going to 20.
I would think continued resetting would have to generate heat or some unnecessary stress somewhere in that movement or the hands...IMO...
ABSOLUTELY , its called the motoman theory.
As far as the watch goes , send it back.
ziggy10
ziggy10
ziggy10
ziggy10
#169
Today, 07:29 AM
Krazy
Senior Member
Veteran Geek
Join Date: Dec 2009
Location: Pa
Posts: 635
Real Name: Jr
Seems the black version is having most of the issues?
Krazy
Krazy
Krazy
Krazy
#170
Today, 07:32 AM
Krazy Join Date: Dec 2009
Senior Member
Veteran Geek
Location: Pa
Posts: 635
Real Name: Jr
By the way the Originals had problems with lack of space between dial face & hands! Hence the
spacer that was ed to fix issue.
Krazy
Krazy
Krazy
Krazy
#171
Today, 07:34 AM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by HeavyChevy
I'm kinda amazed at all the folks who so readily jumped down the OP's throat at the start of
this "discussion," but have been so quiet following Brad's well-reasoned, well-thought-out
— and well-documented — posts...
No one jumped down his throat that I saw , they questioned his language but most
members were very sympathetic . Their was one post who put the links up of all his
complaints, still that was not jumping down his throat. The discussion was over the 20
times testing the chrono and who advised to do that.
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#172
Today, 07:38 AM
trigger
Member
Member Geek
Join Date: Sep 2008
Posts: 31
Sorry to hear this.
I bought the first DD in silvertone and one of the pins fell out. I caught it before it fell to the
floor, otherwise it runs well. I read the post comparing Invicta to Rolex before the deliveries and
I said to myself, I hope they arrive better than the first experience. As of late I have had screws
come out and waited eight weeks for replacements.
I hope you can resolve your problems with the watch and get to enjoy it. There is nothing worse
than waiting for UPS and get a problem watch. Lately it is hit or miss I'm sorry to say with
Invicta.
Trigger
trigger
trigger
trigger
trigger
#173
Today, 07:42 AM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
I do not see this as a major problem as of yet , 3 watches with an
issue does not constitute an epidemic.
In as far as the chrono of cycling it 20 times and the members who
went and tried it on there other watches right , wrong or indifferent I
will not try and break mine I have been testing my watches the same
way for years and I have no problems. I would also like to hear from a
watch expert on this .
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#174
Today, 07:45 AM
Painterguy39
Senior Member
Super Geek
Join Date: Nov 2009
Location: St.Bonifacius,Minnesota
Posts: 1,258
Real Name: Jeff
Mine is perfect!!I had to snug up a few of the screws on the case back but i love the watch....i
really think this is an isolated incident as can happen when producing any more than one of
anything...send it back for an exchange and move on!
Painterguy39
Painterguy39
Painterguy39
Painterguy39
#175
Today, 07:46 AM
Highlander
Member
Member Geek
Join Date: Apr 2010
Location: Bethany, CT
Posts: 47
huh?
Quote:
Originally Posted by Leed24
Although I agree with the expensive $800 comment, I really don't believe that we watch
collectors buy these watches to use as an industrial stop watch. Most buy because they might
occasionally time something. Most of us buy chronographs because we like the look of the
watch. The people on this site have become obsessed with purposefully trying to break this
watch, and it is ridiculous.
So if you only occasionally time something 20 times over the period of 6 mo. or a year and then
the defect shows up, that's ok?
Give me a break! Your line of reasoning is silly and flawed.
Go buy a real watch.
Today, 07:52 AM
journeyguy
Senior Member
Veteran Geek
Join Date: Dec 2009
Posts: 805
I agree 100 %.....And if you check out my thread , Black DD speedway 37/600 defective ...I have
the same problem and What I said was that you need to check your chrono as much as possible. I
dint mean that you had to check 20 times without giving it a break. I just played it with 3-4 times
and the chrono hand wouldn;t reset back to 12 O clock position......some of the comments here
are just not making any sense.
Good luck guys !
Quote:
Originally Posted by Highlander
So if you only occasionally time something 20 times over the period of 6 mo. or a year and then
the defect shows up, that's ok?
Give me a break! Your line of reasoning is silly and flawed.
Go buy a real watch.
journeyguy
journeyguy
journeyguy
journeyguy
#177
Today, 07:55 AM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by Highlander
So if you only occasionally time something 20 times over the period of 6 mo. or a year and
then the defect shows up, that's ok?
Give me a break! Your line of reasoning is silly and flawed.
Go buy a real watch.
A real watch ??? -What is that supposed to mean ?
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#178
Today, 07:58 AM
Highlander
Member
Member Geek
Join Date: Apr 2010
Location: Bethany, CT
Posts: 47
Quote:
Originally Posted by Chief68
A real watch ??? -What is that supposed to mean ?
One that works the way it was intended to 100% of the time.
Highlander
Highlander
Highlander
Highlander's
Highlander
Highlander
#179
Today, 08:02 AM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by Highlander
One that works the way it was intended to 100% of the time.
Nothing and no company is perfect 100 % of the time and I think you know that, such is
life.
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#180
Today, 08:02 AM
Knifemaker
Senior Member
Veteran Geek
Join Date: Apr 2010
Location: Live Free or Die NH
Posts: 801
I like the font they used on the date wheel!
.
__________________
Stebbins Handmade Damascus Knives for the
serious collectors
Knifemaker
Knifemaker
Knifemaker
Knifemaker's
Knifemaker
Knifemaker
#181
Today, 08:06 AM
JoeGa
Senior Member
Super Geek
Join Date: Jul 2008
Location: Atlanta, Georgia
Posts: 2,288
Real Name: Joe T
Quote:
Originally Posted by Knifemaker
I like the font they used on the date wheel!
.
Ha.. me too!
__________________
What ?!? No Watch ?!?
JoeGa
JoeGa
JoeGa
JoeGa
JoeGa
#182
Today, 08:09 AM
chasntime
Senior Member
Super Geek
Join Date: Feb 2010
Location: La Grange, North Carolina
Posts: 1,335
Real Name: George
Quote:
Originally Posted by WatchYaThink
There are lots of occasions where a chronograph may be used repeatedly, at the race track, in
the lab ... many scenarios ..... that is not "purposefully trying to break it" .... that's just using it.
If a watch, especially a very expensive watch, is going to include a chronograph function then
it should be able to be used. If repeated use of the chrono function produces a high risk of
breaking the watch, then there should be a warning notice.
I concur Larry....
I do not "KNOW" anyone here but I agree....I also am an engineer, not that it has a thing to do
with watches, just general equipment uses. Continually testing is a part of ALL production
equipment installations....you will and must test equipment from max speed to emergency stop
to verify safety numerous times BEFORE commissioning. Over and over to make sure, if
something breaks, it is a weak link and must be corrected. In my business, people's lives are at
stake. And if it breaks, then no production for periods not acceptable to the business.
While not a safety issue, I propose two correlations;
1) IF there is an issue, it should have been caught in testing and corrected. That after doing
complete cycles including parts manufacture, assembly, shipping, etc.
2) While normal wear and tear is expected, I do NOT consider using the chrono 20 times in a
row a torture test. I expect mine to function and reset correctly all the time. At least in the
foreseeable future.
Yeah yeah....some complaints correlate the price to the fit and finish. That I can see. But
function is function, if it is there it should work regardless the cost.
I bought htis watch, 205 of 250, so far so good. I have tested the chrono about 8 times in two
days. It's all good. I will keep testing, more in the lines of MY use. Once or twice a day....just
because I like to play with my watches mostly. I have 30 days. If it malfunctions, it goes back. If
not It's a keeper. Assuming the accuracy stays good. (@ +3 yesterday).
Off my soap box....
__________________
Still Chasntime, when I catch it I'll stop buying watches!
chasntime
chasntime
chasntime
chasntime
chasntime
#183
Today, 08:17 AM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by chasntime
I concur Larry....
I do not "KNOW" anyone here but I agree....I also am an engineer, not that it has a thing to do
with watches, just general equipment uses. Continually testing is a part of ALL production
equipment installations....you will and must test equipment from max speed to emergency stop
to verify safety numerous times BEFORE commissioning. Over and over to make sure, if
something breaks, it is a weak link and must be corrected. In my business, people's lives are at
stake. And if it breaks, then no production for periods not acceptable to the business.
While not a safety issue, I propose two correlations;
1) IF there is an issue, it should have been caught in testing and corrected. That after doing
complete cycles including parts manufacture, assembly, shipping, etc.
2) While normal wear and tear is expected, I do NOT consider using the chrono 20 times in a
row a torture test. I expect mine to function and reset correctly all the time. At least in the
foreseeable future.
Yeah yeah....some complaints correlate the price to the fit and finish. That I can see. But
function is function, if it is there it should work regardless the cost.
I bought htis watch, 205 of 250, so far so good. I have tested the chrono about 8 times in two
days. It's all good. I will keep testing, more in the lines of MY use. Once or twice a day....just
because I like to play with my watches mostly. I have 30 days. If it malfunctions, it goes back.
If not It's a keeper. Assuming the accuracy stays good. (@ +3 yesterday).
Off my soap box....
George I want to point out that almost every product that is under development goes through
strenuous testing, to ensure consumer confidence. However after that product has been
developed the product will NOT go through the same testing in the Manufacturing stage.
I have said this from the start, I think that this should work no matter how many times you use it.
But testing does not always show a defect until one puts it through every day use. What ever the
cause of this issue it appears to be Isolated to a few, but the MOB loves to blow it out of
proportion.
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#184
Today, 08:22 AM
for watches only
Senior Member
Super Geek
Join Date: Mar 2008
Posts: 1,173
With all due respect, this thread has become vindictive and downright nasty. First of all guys,
were're only talking about waches and not life and death issues. Getting so emotional serves no
purpose other than to antaganize and cause hard feeling. What it comes down to is that if you
feel you have a questionable or defective watch, contact CS and ship it back for a full refund
including shipping. Furthermore, if that sours you on Invictas (or at least higher end Invictas),
then don't buy the brand. You can report your experience with the timepeice, but why be
emotive? That stated, I am returning my stainless DD, but not due to any malfunction. In fact, it
works perfectly. I'm returning it because I secured the original silvertone with the blue hands
which I just find more attractive. I I also bought the Invicta PD 7751 in silvertone. Both of these
watches are being purchased from one of the most rock solid trusted geek on the forum, so I
have no worries. Look for my feedback soon in the sales section. If I didn't get these other 2
watches, the new DD would definitely have been kept. My # is 52/250. If anyone wants a
perfect example, PM me before I return. I am sorry for those folks who feel they got a
malfunctioning DD and wish you all good luck, but be gracious in your disappointment. It keeps
this site a cut above the others.
With respect,
Larry
for watches only
for watches only
for watches only
for watches only
#185
Today, 08:29 AM
Highlander
Member
Join Date: Apr 2010
Location: Bethany, CT
Member Geek Posts: 47
Quote:
Originally Posted by Chief68 Nothing and no company is perfect 100 % of the time and I think you know that, such is
life.
I've been collecting watches for a long time and frequent two other watch forums, neither of
which feature Invicta, but most all of the other high end brands and yes while there is an
occasional defect that pops up it by no means comes anywhere close to the problems associated
with the Invicta brand and I myself have never received a non Invicta watch that had a problem.
So yes, I agree with you that no company is perfect, there is a vast gap between the quality of
Invicta and other brands as shown right here in this forum, you almost can't go 1 day here
without reading about a problem.
I've never owned an Invicta and after ing here for a while I would never be inclined to, it's just
too risky.
It seems to me that Invicta's business model is to produce an inferior product in order to
maximize profit and to heck with the consumer.
I understand that their price points make some nice looking watches affordable to a lot of people
that normally wouldn't to be able to afford a more expensive watch, but to all the collectors out
there who own multiples of $200 Invictas, I say why not save up $1,000 or so and just buy one
higher quality watch that chances are will work as intended when you receive it.
Highlander
Highlander
Highlander
Highlander's
Highlander
Highlander
#186
Today, 08:32 AM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by Highlander
I've been collecting watches for a long time and frequent two other watch forums, neither of
which feature Invicta, but most all of the other high end brands and yes while there is an
occasional defect that pops up it by no means comes anywhere close to the problems
associated with the Invicta brand and I myself have never received a non Invicta watch that
had a problem.
So yes, I agree with you that no company is perfect, there is a vast gap between the quality of
Invicta and other brands as shown right here in this forum, you almost can't go 1 day here
without reading about a problem.
I've never owned an Invicta and after ing here for a while I would never be inclined to, it's just
too risky.
It seems to me that Invicta's business model is to produce an inferior product in order to
maximize profit and to heck with the consumer.
I understand that their price points make some nice looking watches affordable to a lot of
people that normally wouldn't to be able to afford a more expensive watch, but to all the
collectors out there who own multiples of $200 Invictas, I say why not save up $1,000 or so
and just buy one higher quality watch that chances are will work as intended when you receive
it.
There you go folks, their is your answer! Factual.....not really but an answer never the less!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#187
Today, 08:39 AM
TomRaz
Senior Member
Senior Geek
Join Date: Mar 2009
Location: Seminole, FL.
Posts: 402
Real Name: Tom
Please keep in mind how many models and brands invicta produces and we mostly only hear
about the problems
I am not defending invicta but if other brands sold the volume that invicta does they may have
some of the same issues
I would think the latest version of the dd speedway should of had extra qa to make up for last
years issues
TomRaz
TomRaz
TomRaz
TomRaz
#188
Today, 08:44 AM
Highlander
Member
Member Geek
Join Date: Apr 2010
Location: Bethany, CT
Posts: 47
Quote:
Originally Posted by TomRaz
Please keep in mind how many models and brands invicta produces and we mostly only hear
about the problems
I am not defending invicta but if other brands sold the volume that invicta does they may have
some of the same issues
I would think the latest version of the dd speedway should of had extra qa to make up for last
years issues
I'm sure that all the other brands out there combined have equal to or greater production
numbers than Invicta and just going by the other forums for these watches there is no way close
to the number of problems reported.
Quantity of production should not be an excuse for high numbers of defects.
I think it's telling when someone feels compelled to making a separate post about receiving a
watch that works properly out of the box!
Highlander
Highlander
Highlander
Highlander's
Highlander
Highlander
#189
Today, 08:46 AM
Painterguy39
Senior Member
Super Geek
Join Date: Nov 2009
Location: St.Bonifacius,Minnesota
Posts: 1,258
Real Name: Jeff
this thread is trouble
Painterguy39
Painterguy39
Painterguy39
Painterguy39
#190
Today, 08:46 AM
rgmb2
Senior Member
Senior Geek
Join Date: Jun 2008
Location: Chicago
Posts: 357
Real Name: Mike
Quote:
Originally Posted by rgmb2
No, they really don't. And just because people on this forum whine does not mean they are
entitled to manufacturers responding to them. Stop buying watch brands that fail if this is a
problem for you. I'm starting to think that the some of the credibility gap between this forum
and some other watch forums is partly the number of uninformed comments that pervade these
threads versus the perception of lower quality time pieces. For what it's worth, the Omega
Coaxial movement which costs a bit more than this DD movement had a terrible chrono flaw
in it where by operating the reset pusher before stopping the chrono would result in a broken
chrono - either constantly running or not working at all. Not only did the CEO not come out
with a personal statement, but most of the repairs were done at the owners' expense as
watches were out of warranty - $650 bucks at your local authorized Omega repair shop if
you're curious. Was I pissed, yes. Did I expect a statement...no. Should a chrono break by
pushing the reset pusher before it is stopped, no. Should it break after twenty repeated
uses....no. The good news here is if you have a broken watch or are worried, send the damn
thing back, and select a different brand. We need to start elevating these discussions.....they
are getting old.
Back to my original post - the stupidity of rehashing this continues........
__________________
Even the wall clocks are better in Europe.
rgmb2
rgmb2
rgmb2
rgmb2
#191
Today, 08:48 AM
Highlander
Member
Member Geek
Join Date: Apr 2010
Location: Bethany, CT
Posts: 47
Quote:
Originally Posted by rgmb2
Back to my original post - the stupidity of rehashing this continues........
Agree.
Highlander
Highlander
Highlander
Highlander's
Highlander
Highlander
#192
Today, 08:50 AM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by Highlander
I'm sure that all the other brands out there combined have equal to or greater production
numbers than Invicta and just going by the other forums for these watches there is no way
close to the number of problems reported.
Quantity of production should not be an excuse for high numbers of defects.
I think it's telling when someone feels compelled to making a separate post about receiving a
watch that works properly out of the box!
Stick around here long enough and you will see that 1/3 or more reported problems have NO
factual proof of an issue. There are so many who love to bash Invicta it is unreal. The fact of the
matter is you nor I nor anyone else knows the true numbers of defective watches from Invicta or
any other brand. So one must read through the BS that takes place here. stick around do some
reading and ask some questions and it wont take long for you to read between the lines.
Have we seen one single video of proof from the OP or any other there is a actual problem?
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#193
Today, 08:51 AM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by Highlander
I've been collecting watches for a long time and frequent two other watch forums, neither of
which feature Invicta, but most all of the other high end brands and yes while there is an
occasional defect that pops up it by no means comes anywhere close to the problems
associated with the Invicta brand and I myself have never received a non Invicta watch that
had a problem.
So yes, I agree with you that no company is perfect, there is a vast gap between the quality of
Invicta and other brands as shown right here in this forum, you almost can't go 1 day here
without reading about a problem.
I've never owned an Invicta and after ing here for a while I would never be inclined to, it's just
too risky.
It seems to me that Invicta's business model is to produce an inferior product in order to
maximize profit and to heck with the consumer.
I understand that their price points make some nice looking watches affordable to a lot of
people that normally wouldn't to be able to afford a more expensive watch, but to all the
collectors out there who own multiples of $200 Invictas, I say why not save up $1,000 or so
and just buy one higher quality watch that chances are will work as intended when you receive
it.
I own over 420 watches and 300 of them or more are Invicta mostly
Reserves , and I have never had an issue with one so that sure seems
like good odds to me. Here is my point you never owned one and never
will but you are opinionated on them and quite frankly you have no
right to be but that is the problem here - you spread HERESAY. You
never owned one but you comment as you have and that is what
should stop. I have no problem with people that have an issue if they
bought a watch from a company and something went wrong and they
speak of experience . Food For Thought.
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#194
Today, 08:56 AM
Leed24
Senior Member
Super Geek
Join Date: Sep 2009
Location: Phoenix, AZ.
Posts: 2,110
Real Name: Lee
Quote:
Originally Posted by Highlander
So if you only occasionally time something 20 times over the period of 6 mo. or a year and
then the defect shows up, that's ok?
Give me a break! Your line of reasoning is silly and flawed.
Go buy a real watch.
Who ARE you ? Never heard of you before, 38 whole posts and your calling me silly and flawed
and calling out people. You don't even have the courtesy to give us your name. On top of that
your telling me to buy a real watch ? I am not saying you can't have an opinion, but how about
sharing some forum time before you start calling out people you don't know or certainly have
never heard of you.
__________________
Leed24
Leed24
Leed24
Leed24
Leed24
#195
Today, 09:02 AM
Highlander
Member
Member Geek
Join Date: Apr 2010
Location: Bethany, CT
Posts: 47
Quote:
Originally Posted by Chief68
I own over 420 watches and 300 of them or more are Invicta mostly
Reserves , and I have never had an issue with one so that sure
seems like good odds to me. Here is my point you never owned one
and never will but you are opinionated on them and quite frankly you
have no right to be but that is the problem here - you spread
HERESAY. You never owned one but you comment as you have and
that is what should stop. I have no problem with people that have an
issue if they bought a watch from a company and something went
wrong and they speak of experience . Food For Thought.
Ok, if you're telling me that most of the people reporting problems here are liars then I'll abide
by that and agree that Invicta has no higher rate of defects than other brands.
Highlander
Highlander
Highlander
Highlander's
Highlander
Highlander
#196
Today, 09:03 AM
rgmb2
Senior Member
Senior Geek
Join Date: Jun 2008
Location: Chicago
Posts: 357
Real Name: Mike
Quote:
Originally Posted by Leed24
Who ARE you ? Never heard of you before, 38 whole posts and your calling me silly and
flawed and calling out people. You don't even have the courtesy to give us your name. On top
of that your telling me to buy a real watch ? I am not saying you can't have an opinion, but
how about sharing some forum time before you start calling out people you don't know or
certainly have never heard of you.
With all do respect, I've read your posts and know you are an excellent contributor in substance
and quantity, but the "whose is larger argument" has no place in replying. The guy's substance
was so weak it spoke for itself.
__________________
Even the wall clocks are better in Europe.
rgmb2
rgmb2
rgmb2
rgmb2
#197
Today, 09:05 AM
Highlander
Member
Member Geek
Join Date: Apr 2010
Location: Bethany, CT
Posts: 47
Quote:
Originally Posted by Leed24
Who ARE you ? Never heard of you before, 38 whole posts and your calling me silly and
flawed and calling out people. You don't even have the courtesy to give us your name. On top
of that your telling me to buy a real watch ? I am not saying you can't have an opinion, but
how about sharing some forum time before you start calling out people you don't know or
certainly have never heard of you.
I didn't cally you silly personally, I said you're line of reasoning was silly as pertains to the op's
problem.
My name is Rich, if that makes a difference.
Highlander
Highlander
Highlander
Highlander's
Highlander
Highlander
#198
Today, 09:05 AM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by Highlander
Ok, if you're telling me that most of the people reporting problems here are liars then I'll abide
by that and agree that Invicta has no higher rate of defects than other brands.
Liars is a strong word , some people not all just want to start trouble
that has been proven many times, but you should not be the one
spreading anything because you do not own any - THAT I am sure of.
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#199
Today, 09:09 AM
Leed24
Senior Member
Super Geek
Join Date: Sep 2009
Location: Phoenix, AZ.
Posts: 2,110
Real Name: Lee
Quote:
Originally Posted by Highlander
I didn't cally you silly personally, I said you're line of reasoning was silly as pertains to the
op's problem.
My name is Rich, if that makes a difference.
Yes it does make a difference. We are kind of a family here, and when someone we don't
know who says he does not even own an Invicta (the primary sponser here on this site),
says he belongs to other forums, tells people to buy "a real watch", and stirs up crap, we
tend to get a little suspicious. __________________
Leed24
Leed24
Leed24
Leed24
Leed24
#200
Today, 09:12 AM
Leed24
Senior Member
Super Geek
Join Date: Sep 2009
Location: Phoenix, AZ.
Posts: 2,110
Real Name: Lee
Quote:
Originally Posted by rgmb2
With all do respect, I've read your posts and know you are an excellent contributor in
substance and quantity, but the "whose is larger argument" has no place in replying. The guy's
substance was so weak it spoke for itself.
Mike I am not using the "whose is larger argument" that is why I stated I don't mind someone
having an opinion. I just get tired of the "Hit and Run" posts by people who clearly don't
spend any time here. __________________
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by Leed24
Yes it does make a difference. We are kind of a family here, and when someone we don't
know who says he does not even own an Invicta (the primary sponser here on this site), says
he belongs to other forums, tells people to buy "a real watch", and stirs up crap, we tend to
get a little suspicious.
Easy Lee, Easy Brother.. rub your pressure points my man Wooosawwwwww! LOL
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#202
Today, 09:14 AM
rgmb2
Senior Member
Senior Geek
Join Date: Jun 2008
Location: Chicago
Posts: 357
Real Name: Mike
Quote:
Originally Posted by Leed24
Mike I am not using the "whose is larger argument" that is why I stated I don't mind someone
having an opinion. I just get tired of the "Hit and Run" posts by people who clearly don't
spend any time here.
Agree with that 100%. I also think there should be a waiting period for 10 days before anyone
can post for anythread related to the launch of any reserve automatic time piece. People get
worked up about them in both directions. I was a complainer back in the lupah
sandstone/meteroite days when mine arrived missing hour markers. Cooling off period might
help.......Begin the "Freedom of Speech" posts now.......
__________________
Even the wall clocks are better in Europe.
rgmb2
rgmb2
rgmb2
rgmb2
#203
Today, 09:14 AM
Highlander
Member
Member Geek
Join Date: Apr 2010
Location: Bethany, CT
Posts: 47
Quote:
Originally Posted by Chief68
Liars is a strong word , some people not all just want to start trouble
that has been proven many times, but you should not be the one
spreading anything because you do not own any - THAT I am sure of.
If someone says they have a problem with a watch but don't really have the problem then that's
lying in my book.
And yes I don't own Invicta but I can read what's posted here and I guess I was gullible to
believe all of it, I'll take that into account from now on.
What percentage of the "I have a problem with my watch" posts would you estimate are valid?
Highlander
Highlander
Highlander
Highlander's
Highlander
Highlander
#204
Today, 09:20 AM
Evil Empire
Senior Member
Veteran Geek
Join Date: Jan 2010
Location: Powhatan Virginia
Posts: 789
Real Name: Scott
Weve all been here before,I hope My freinds that ordered this watch got a good one.good luck to
all
__________________
KIMBER COMPROMISE SOMEWERE ELSE
Evil Empire
Evil Empire
Evil Empire
Evil Empire
#205
Today, 09:21 AM
Evil Empire
Senior Member
Veteran Geek
Join Date: Jan 2010
Location: Powhatan Virginia
Posts: 789
Real Name: Scott
silvertone is back on the shop
__________________
KIMBER COMPROMISE SOMEWERE ELSE
Evil Empire
Evil Empire
Evil Empire
Evil Empire
#206
Today, 09:21 AM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by Highlander
If someone says they have a problem with a watch but don't really have the problem then that's
lying in my book.
And yes I don't own Invicta but I can read what's posted here and I guess I was gullible to
believe all of it, I'll take that into account from now on.
What percentage of the "I have a problem with my watch" posts would you estimate are valid?
Very hard to say Rich some members thought they had an issue and it
gets corrected right here on the forum , some come here just to troll
and cause trouble and then some really have a defect. The truth is
that Invicta is not as bad as portrayed that is a fact - They make a ton
of watches with fantastic designs at a lower cost than most
companies and that is the major reason for the hatred.
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#207
Today, 09:21 AM
forehire
Senior Member
Super Geek
Join Date: Aug 2008
Location: RANCHO MIRAGE CA
Posts: 1,352
The frist run watchs had a problem with the hands. I belive all the watchs with the blue hand
will have that problem. I sent mine back to Invicta, and it seams they did a good job on the
repair. Crono's are al;ways a prollem, just another thing to go wrong. But still for the money,
once fixed, you will have a great watch.
forehire
forehire
forehire
forehire
#208
Today, 09:22 AM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
I just ordered the Two Tone Speedway last night and I hope it
gets here by Monday.
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#209
Today, 09:23 AM
Highlander
Member
Member Geek
Join Date: Apr 2010
Location: Bethany, CT
Posts: 47
Quote:
Originally Posted by Leed24
Mike I am not using the "whose is larger argument" that is why I stated I don't mind someone
having an opinion. I just get tired of the "Hit and Run" posts by people who clearly don't
spend any time here.
I spend quite a bit of time here, I every day, I just don't post alot and believe it or not I really am
of the opinion that if you don't have anything good to say then don't say anything, which is why
I don't have a lot of posts.
But every once in a while when I read something that to me makes so little sense then I feel I
need to speak up about it.
When someone implies that starting & stopping a chronograph 20 times over a short period is
not a good thing, something that it was built to do (start & stop) and that if it becomes defective
because of that treatment.....well, that just falls into the no sense category for me.
Highlander
Highlander
Highlander
Highlander's
Highlander
Highlander
#210
Today, 09:24 AM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by Chief68
I just ordered the Two Tone Speedway last night and I hope it
gets here by Monday.
Man you are on a roll! Very niiiiiiice!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#211
Today, 09:26 AM
RKD0110
Senior Member
Senior Geek
Join Date: May 2009
Location: KY
Posts: 237
Real Name: Rick
Quote:
Originally Posted by Flyback
I have no way of knowing what the actual mean-time-to-failure would be in an
automatic chronograph movement, but sheer logic tells me that operating one a
mere 20 times in succession should have no impact on it. These are precision
instruments, not Veg-A-Matics. I don't own a watch with the Dubois Depraz 2021
chronograph module, but nonetheless wanted to run a test of my own. I chose my
Philip Watch Sunray chronograph powered by the venerable Valjoux 7750 as it is
one of the older ones I own, which should make it more susceptible to slippage. I
operated the chronograph function in continuous succession from 0 to 15 seconds
followed by an immediate reset for 120 cycles with no adverse effect. The only
reason I stopped was out of boredom and tired fingers. IMHO based on the
unavoidable logic that these things have to be engineered to operate more than
occasionally, there is something amiss with those that are slipping.
+1 Brad
RKD0110
RKD0110
RKD0110
RKD0110
RKD0110
#212
Today, 09:27 AM
for watches only
Senior Member
Super Geek
Join Date: Mar 2008
Posts: 1,173
Clarification
Quote:
Originally Posted by forehire
The frist run watchs had a problem with the hands. I belive all the watchs with the blue hand
will have that problem. I sent mine back to Invicta, and it seams they did a good job on the
repair. Crono's are al;ways a prollem, just another thing to go wrong. But still for the money,
once fixed, you will have a great watch.
If you are referring to the first offering (silvertone dial with blued hands), then your statement is
not totally true. While noone can argue the point that many of these watches had problems, like
yours, and had to be sent in for repair, I know many geeks who own this same model with no
issues whatsoever. Please, this post is not ment to be confrontational in any way, just to clarify.
Larry
for watches only
for watches only
for watches only
for watches only
#213
Today, 09:31 AM
Highlander
Member
Member Geek
Join Date: Apr 2010
Location: Bethany, CT
Posts: 47
Quote:
Originally Posted by Chief68
Very hard to say Rich some members thought they had an issue and
it gets corrected right here on the forum , some come here just to
troll and cause trouble and then some really have a defect. The truth
is that Invicta is not as bad as portrayed that is a fact - They make a
ton of watches with fantastic designs at a lower cost than most
companies and that is the major reason for the hatred.
I've seen the posts about supposed defects that really weren't and got corrected here on the
forum, calibrating the chrono hand on the quartz movements and such and I'm not taking those
into consideration, but come on, all the posts about mold, hands falling off, the first batch of DD
Speedways and not the problems beginning to surface about this batch. It just seems to go on
and on with this brand and aside from an isolated incident here and there about other brands like
the problem with the Omegas posted earlier there really is very little to compare in this regard.
Highlander
Highlander
Highlander
Highlander's
Highlander
Highlander
#214
Today, 09:32 AM
bfalba1
Senior Member
Veteran Geek
Join Date: Apr 2010
Location: new castle pa
Posts: 724
Real Name: brian
Quote:
Originally Posted by RipitRon
Stick around here long enough and you will see that 1/3 or more reported problems have NO
factual proof of an issue. There are so many who love to bash Invicta it is unreal.
and there are so many here that think invicta does no wrong at all! they say they are tired of all
the invicta "bashing"and then in the same breath point the finger and "bash" at someone
else(shipper or shopnbc). no one is perfect believe it or not. not even invicta.i will continue to
buy then as will everyone else since they make great and innovative timepieces at very great
prices. but at the same time i will not be blinded ny then into thinking they have no problems
and the problem is always with the shipper or shopnbc.with the volume of watches invicta make
yes there will be some problems that is understandable but when you only have 250 of a piece in
my opinion there should be NO problems at all! we are not talking about a massed produced
WATCH here we are talking about a very special limited edition TIMEPIECE. hopefully this
will open some eyes and let some people who think invicta is perfect (and all the problems
people have had to have happened elsewhere) see that they are not perfect and maybe they will
stop swinging like a monkey on a banana tree!
bfalba1
bfalba1
bfalba1
bfalba1
#215
Today, 09:33 AM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by Highlander
I've seen the posts about supposed defects that really weren't and got corrected here on the
forum, calibrating the chrono hand on the quartz movements and such and I'm not taking
those into consideration, but come on, all the posts about mold, hands falling off, the first
batch of DD Speedways and not the problems beginning to surface about this batch. It just
seems to go on and on with this brand and aside from an isolated incident here and there
about other brands like the problem with the Omegas posted earlier there really is very little
to compare in this regard.
Once again you go right back to talking about things you did not experience . Give it a rest
Rich it is getting OLD. __________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#216
Today, 09:35 AM
zulumack
Senior Member
Super Geek
Join Date: Oct 2009
Location: CT
Posts: 1,615
Real Name: john
Quote:
Originally Posted by RipitRon
Easy Lee, Easy Brother.. rub your pressure points my man Wooosawwwwww! LOL
thats funny ! calm down Lee you got family!
zulumack
zulumack
zulumack
zulumack
#217
Today, 09:36 AM
Watchman58
Senior Member
Senior Geek
Join Date: Aug 2009
Posts: 477
Real Name: Mike
Quote:
Originally Posted by Flyback
I have no way of knowing what the actual mean-time-to-failure would be in an
automatic chronograph movement, but sheer logic tells me that operating one a
mere 20 times in succession should have no impact on it. These are precision
instruments, not Veg-A-Matics. I don't own a watch with the Dubois Depraz 2021
chronograph module, but nonetheless wanted to run a test of my own. I chose my
Philip Watch Sunray chronograph powered by the venerable Valjoux 7750 as it is
one of the older ones I own, which should make it more susceptible to slippage. I
operated the chronograph function in continuous succession from 0 to 15 seconds
followed by an immediate reset for 120 cycles with no adverse effect. The only
reason I stopped was out of boredom and tired fingers. IMHO based on the
unavoidable logic that these things have to be engineered to operate more than
occasionally, there is something amiss with those that are slipping.
Very well said as usual Brad,I have to agree with your opinion on this subject.
__________________
Watchman58
Watchman58
Watchman58
Watchman58
Watchman58
#218
Today, 09:39 AM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by bfalba1
and there are so many here that think invicta does no wrong at all! they say they are tired of
all the invicta "bashing"and then in the same breath point the finger and "bash" at someone
else(shipper or shopnbc). no one is perfect believe it or not. not even invicta.i will continue to
buy then as will everyone else since they make great and innovative timepieces at very great
prices. but at the same time i will not be blinded ny then into thinking they have no problems
and the problem is always with the shipper or shopnbc.with the volume of watches invicta
make yes there will be some problems that is understandable but when you only have 250 of a
piece in my opinion there should be NO problems at all! we are not talking about a massed
produced WATCH here we are talking about a very special limited edition TIMEPIECE.
hopefully this will open some eyes and let some people who think invicta is perfect (and all the
problems people have had to have happened elsewhere) see that they are not perfect and
maybe they will stop swinging like a monkey on a banana tree!
No one ever said they are Perfect Brian but they are a far cry from the
way they are portrayed.
Lets get back on Topic here Please , I think we have just about
covered this.
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#219
Today, 09:43 AM
mrblue
Senior Member
Master WatchGeek
Join Date: Apr 2009
Posts: 4,172
Highlander .. as a new member who has 'never' owned an Invicta your comments are
so far out of line that it sens me.
To say that Invicta's purpose is to make 'inferior' watches so that they
can make the most profit !!
.... when their Mantra is to make the highest possible quality for the
least/or affordable price to the consumer ......... is ruthless, and, further
shows a great deal of disregard for all of us who love our SAS's, SAN4's,
and so many other watches which have an incredible record of accuracy
and quality of build and design.
Why are you doing this .. generalizing so much about a fine company that tries so hard
to please and 98 percent of the time SUCCEEDS .....
Based upon simple objective deduction, you must have some personal agenda, especially since
you have never owned one single Invicta watch ......
PLSE FIND SOMETHING ELSE TO DO W/YOUR TIME .. or maybe just wish us all joy and
happiness with our large collections of Invictas which have never failed.
MR BLUE
mrblue
mrblue
mrblue
mrblue
#220
Today, 09:45 AM
soberdave09
Senior Member
True WatchGeek
Join Date: Sep 2009
Location: philadelphia
Posts: 6,391
Real Name: david b.
__________________
soberdave09
soberdave09
soberdave09
soberdave09
soberdave09
#221
Today, 09:45 AM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by soberdave09
Damn you beat me too it! LOL
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#222
Today, 09:46 AM
Highlander
Member
Member Geek
Join Date: Apr 2010
Location: Bethany, CT
Posts: 47
Quote:
Originally Posted by Chief68
Once again you go right back to talking about things you did not experience . Give it a rest
Rich it is getting OLD.
I've seen several pictures posted here showing the mold and the hands floating around loose, so
unless they were photoshopped I'd call that experience.
Agree about this getting old so this will be the last thing I say in this thread.
You or anyone else are welcome to have the last word, I'll keep my mouth shut.
Highlander
Highlander
Highlander
Highlander's
Highlander
Highlander
#223
Today, 09:47 AM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by Highlander
I've seen several pictures posted here showing the mold and the hands floating around loose,
so unless they were photoshopped I'd call that experience.
Agree about this getting old so this will be the last thing I say in this thread.
You or anyone else are welcome to have the last word, I'll keep my mouth shut.
Enjoy your stay and have a nice day!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#224
Today, 09:50 AM
Highlander
Member
Member Geek
Join Date: Apr 2010
Location: Bethany, CT
Posts: 47
Quote:
Originally Posted by mrblue
Highlander .. as a new member who has 'never' owned an Invicta your comments are
so far out of line that it sens me.
To say that Invicta's purpose is to make 'inferior' watches so that they
can make the most profit !!
.... when their Mantra is to make the highest possible quality for the
least/or affordable price to the consumer ......... is ruthless, and, further
shows a great deal of disregard for all of us who love our SAS's, SAN4's,
and so many other watches which have an incredible record of accuracy
and quality of build and design.
Why are you doing this .. generalizing so much about a fine company that tries so hard
to please and 98 percent of the time SUCCEEDS .....
Based upon simple objective deduction, you must have some personal agenda, especially since
you have never owned one single Invicta watch ......
PLSE FIND SOMETHING ELSE TO DO W/YOUR TIME .. or maybe just wish us all joy and
happiness with our large collections of Invictas which have never failed.
MR BLUE
Enjoy your watches, I wish you and all others here nothing but the best of luck with them and I
really mean that.
I have no agenda other than to speak up about something that to me makes no sense as I've
stated before.
Highlander
Highlander
Highlander
Highlander's
Highlander
Highlander
#225
Today, 09:53 AM
mrblue
Senior Member
Master WatchGeek
Join Date: Apr 2009
Posts: 4,172
In your last post, you said " this is my last comment " ..... guess you didn't mean it Highlander
......... I'm glad you wish us all well w/our Invictas. That took some heart and
is appreciated.
CHIEF, HAS THIS ONE RUN IT'S COURSE YET ......... PLSE CLOSE ...... mercy !!
BEST TO EYAL AND INVICTA .. THANKS FOR ALL THE GREAT WATCHES I OWN ..
BLUE
X-James
Senior Member
Senior Geek
Join Date: May 2010
Posts: 476
Quote:
Originally Posted by Chief68
Larry I am not saying that there is not a problem with these
it is too early yet but everyone keeps bringing up that night
on TV and the girl dropped the watch on the floor prior to
airing that night. The watch was operating fine before that
and as for you saying a couple of times 20 is borderline
abuse and it is above normal operation so I just hope
whoever advised the members to do this knows what they
are talking about.
I really have no dog in this discussion but mentioning borderline abuse makes me wonder
something.
This is a Speedway model watch and designed to check speeds and such at lets say a race like
the Daytona 500 this weekend. Lets just say a person who purchased this watch goes to the race
and decides to use his new Speedway to check lap times throughout the race. He may do that 5,
10, 20 or 30, 40 or even 50 times over the course of the couple of hours.
Is it borderline abuse for him to do that? Would he be wrong in hoping that his watch would
work perfectly each and every time? I'm sorry Nick but I don't understand the borderline abuse
part of it. The watch in question is a stopwatch. What is normal operation of a stopwatch?
Like I said I have no dog in this but its a stopwatch that should be able to used like a stopwatch.
X-James
X-James
X-James
X-James
#227
Today, 09:58 AM
Highlander
Member
Member Geek
Join Date: Apr 2010
Location: Bethany, CT
Posts: 47
Quote:
Originally Posted by mrblue
In your last post, you said " this is my last comment " ..... guess you didn't mean it Highlander
......... I'm glad you wish us all well w/our Invictas. That took some heart and
is appreciated.
CHIEF, HAS THIS ONE RUN IT'S COURSE YET ......... PLSE CLOSE ...... mercy !!
BEST TO EYAL AND INVICTA .. THANKS FOR ALL THE GREAT WATCHES I OWN ..
BLUE
Yes, positive comments and this one excepted.
Highlander
Highlander
Highlander
Highlander's
Highlander
Highlander
#228
Today, 10:03 AM
Z4MC
Senior Member
Super Geek
Join Date: Aug 2008
Location: San Antonio,TX
Posts: 2,275
Did someone say earlier to send it back and get on with life??
Personally I thought the watch was boring anyway (now that two tone version is VERY nice)
but use one of your beater Chinese chronos I bet it will work perfectly
__________________
The American Republic will endure until the day Congress discovers that it can bribe the public
with the public's money. ...Alexis de Tocqueville after travelling to America 1834
Z4MC
Z4MC
Z4MC
Z4MC
#229
Today, 10:04 AM
Hotspur
Senior Member
Super Geek
Join Date: Feb 2010
Location: Here - now
Posts: 2,145
Real Name: William (Bill)
Quote:
Originally Posted by WATCHJAC
I just completed the same test that Brad just did on two different watches and movements although I did not do as many cycles. Here are the watch models movements and number of cycles:
Movado Series 800 37 Jewel Swiss ETA 2894.2 (35-cycles) Victorinox Swiss Air Force Air Boss Mach 6 Valjoux 7753 (25-cycles)
With no adverse effect!
BTW I do feel that this in anyway constitutes any abuse of my timepieces. Although like others here do not use my chrono function that often I do expect that if I need to use it, it should work without issue or limitation. After all these are not dime store watches these are professional timepieces.
Well stated. Abuse? I think not. Followed the example of Brad and Joe and have just finished
cycling the chronograph of my 30 year old Rolex Daytona 30 times (I've said before that I don't
baby my watches) in the course of 15 minutes at different points on the dial with no failures to
reset to zero, skips, jumps or stutters whatsoever. That's a clear indication of "build quality" and
performance that I simply expect in a high quality watch.
__________________ They all wound - the last one kills (inscribed below a 15th century clock)
Hotspur
Hotspur
Hotspur
Hotspur
#230
Today, 10:16 AM
st_nick
Senior Member
Senior Geek
Join Date: Oct 2009
Location: Massachusetts
Posts: 340
In the earlier models, there was a stated flaw with hand tolerances. Perhaps that hasn't been
ressed fully?
st_nick
st_nick
st_nick
st_nick
#231
Today, 10:24 AM
ironman2092
Senior Member
Senior Geek
Join Date: May 2008
Posts: 229
I guess we will see later on how this new batch of DD are going to perform to early to tell if is a
massive problem.I can understand people reacting this way over a watch with a movement that
before had a history of issues.Invicta has a great value and you will be very happy if your watch
perform like it should,for the money if you get one working good you as a consumer won.No
agendas here i hope whoever bought one or already has one wish you the best and yes you
should be able to run the chronos 30 times with no problems but please dont drop the watch
before you do it.
ironman2092
ironman2092
ironman2092
ironman2092
#232
Today, 10:32 AM
Anachron12
Junior Member
New Geek
Join Date: Jan 2010
Posts: 9
I have been reading every thing I could about this issue. I got pulled into the gravity-field of
unsatisfied people to the point where I was more than hesitant about buying a DD.
I looked at all the Invictas I had and thought of all the good feelings I got from each one. It was
then that I picked up a SAS that I got with a damaged case back screw and remembered what I
thought at the time. I never sent it back. The watch was perfect in every other respect so I kept it.
Here I would like to say that nearly one hundred percent of the watches I got from the shop was
flawless.
I do not think these negative things are the intent of Invicta or the people who entertain us and
make our collecting a lot more than watching grass grow or listening to crickets chirp on a dark
night.
However, I do think, though, that if some one is rubbing you the wrong way and you let them
know it they will CORRECT the situation.ß
Anachron12
Anachron12
Anachron12
Anachron12
Anachron12
#233
Today, 10:34 AM
timeman
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Long Island, New York
Posts: 6,295
Real Name: Jerry
Quote:
Originally Posted by Leed24
You know what, if I am wrong I am wrong. I will take the heat. There just seems like something
logically wrong with purposefully trying to break something that in my opinion really was not
designed for heavy use like that.
What difference does it make if you run the chronograph 20 times in one day, or 20 times over a
period of 20 days? If after the 20th time it malfunctions, something is wrong with the movement
__________________
timeman
timeman
timeman
timeman
#234
Today, 10:40 AM
rice22
Senior Member
Senior Geek
Join Date: Apr 2009
Location: northern ca.
Posts: 453
Real Name: Larry
To the Op I hope things work out for you. I got the silver and had it two days and everything
seems ok. I didn't taken the plastic off because I knew these post were going to start and now im
reconsidering my own purchase. I personally look at the some threads to see if I should be
checking for any problems but I may have read to many this time. Kinda sucks because im not
excited about this watch anymore.
rice22
rice22
rice22
rice22
rice22
#235
Today, 10:41 AM
Subaquasteve
Senior Member
Veteran Geek
Join Date: Sep 2010
Location: nj
Posts: 684
I just got my SAN4 from the Thursaday run and it seems to be working fine. Does anyone know
how many times I should run it over with my truck to see if I should send it back or not?
__________________
I use too many exclamation points!!!!
Subaquasteve
Subaquasteve
Subaquasteve
Subaquasteve
#236
Today, 10:45 AM
Knifemaker
Senior Member
Veteran Geek
Join Date: Apr 2010
Location: Live Free or Die NH
Posts: 802
WOW its starting to sound like the watchlords around here and the issue with one watch.
.
__________________
Stebbins Handmade Damascus Knives for the
serious collectors
Knifemaker
Knifemaker
Knifemaker
Knifemaker's
Knifemaker
Knifemaker
#237
Today, 10:47 AM
pam29188
Senior Member
Senior Geek
Join Date: Mar 2008
Posts: 187
I was told by Tourneau and other AD that I should be careful with my Breitling Navitimer using
the the 7750 Chrono movement. I wondered WTF as seeing it's a $5,000 timepiece, it should
take some abuse and should reset to 0 all the time.
However, after reading across all the forums here and other sites, common conclusion was there
is NO chrono movement out there that will last forever. Some people are tough on the chrono
pushers and the torque you apply to the pusher may break something inside. NO chrono watch is
free from this type of behavior (Breitling, Omega, etc). Go and speak to an honest Tourneau or
AD tech person.
You have other issues like people going back and forth on whether you should run your chronos
for long periods of time...and I say why not?!!, it's got a 12 or 24 hour totalizer right? But I've
learned to understand, these movements are complex with small sensitive parts inside, so I'm not
expecting it to take excessive abuse...if you want to abuse pushers, drop watches, etc., then go
buy the quartz version and worry less. You buy hand built mechanical movements, expect
something to eventually go if you use constantly or excessively...as with cars and homes, that's
part of the ownership experience.
To the OP, I'm bummed you got a bad movement from Invicta, but it happens to ALL
manufacturers. It just gets magnified here by some trolls and member reactions. Send it back and
get a new one and call it a day.
I wouldn't mention that you cycled it 20-30times though as I'm sure you will definitely be
refused a repair or return based on that.
Good luck.
pam29188
pam29188
pam29188
pam29188
#238
Today, 10:47 AM
otownboy7
Member
Member Geek
Join Date: Jun 2010
Location: Miami, FL
Posts: 60
Real Name: Greg
Quote:
Originally Posted by Subaquasteve
I just got my SAN4 from the Thursaday run and it seems to be working fine. Does anyone know
how many times I should run it over with my truck to see if I should send it back or not?
LOL! At least 20!
otownboy7
otownboy7
otownboy7
otownboy7
#239
Today, 10:51 AM
405 hp
Senior Member
Join Date: Jul 2009
Location: joliet,il
Veteran Geek Posts: 703
Real Name: greg
I ran my chrono though the paces,ran it 10 times in a row,stopping it from10 seconds to 3
minutes resetting each time,no problems.This watch is a precsion instrument as posted,it should
be able to take what ever you give it just shy of abuse.20 times in a row is not even close to
abuse and definitly not trying to purposely breaking it.It is a defective timepiece,send it back.
405 hp
405 hp
405 hp
405 hp
405 hp
#240
Today, 10:53 AM
strutn45
Senior Member
True WatchGeek
Join Date: Mar 2009
Location: "Da Swamp" LA.
Posts: 11,698
Real Name: John "DID DAT"
Quote:
Originally Posted by Subaquasteve
I just got my SAN4 from the Thursaday run and it seems to be working fine. Does anyone know
how many times I should run it over with my truck to see if I should send it back or not?
__________________
strutn45
strutn45
strutn45
strutn45
#241
Today, 10:58 AM
Tandi
Senior Member
Senior Geek
Join Date: May 2010
Posts: 414
Guys, I have reset my Zenith in rapid secession many times with no issues but, I had a Gevril Seacloud that had a DD module for its chrono movement
and I did have an issue with the hands resetting. I took it to my local watch guy and he realigned the chrono hands. Maybe the movement is a little
more susceptible to this issue. Just an observation.
Tandi
Tandi
Tandi
Tandi
Tandi
#242
Today, 10:59 AM
watchdude1
WatchGeeks Moderator Master WatchGeek
Join Date: Nov 2008
Location: The Woodlands, TX
Posts: 3,213
Real Name: Matt
Quote:
Originally Posted by Krazy
Finally the voice of reason!!!
Brad is usually spot on, this case being a fine example...
__________________
"There's a difference in livin' and livin' well..."
-George Strait
watchdude1
watchdude1
watchdude1
watchdude1
#243
Today, 11:06 AM
timeman
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Long Island, New York
Posts: 6,295
Real Name: Jerry
Quote:
Originally Posted by timeman
Eyal, TeamInvicta, DD or all parties need to comment on this and explain what's the reason
for this, and what steps are being taken to correct the alleged malfunctions.
Quote:
Originally Posted by rgmb2
No, they really don't. And just because people on this forum whine does not mean they are
entitled to manufacturers responding to them. Stop buying watch brands that fail if this is a
problem for you.
A simple explanation from one or all of the parties concerned could bring all this speculation to
an end. What's wrong with that?
__________________
timeman
timeman
timeman
timeman
#244
Today, 11:08 AM
HondaLover
Senior Member
Master WatchGeek
Join Date: Mar 2008
Location: Chapel Hill, North Carolina
Posts: 2,700
Real Name: John
Perhaps the hole in the chrono second hand is a bit big, allowing a little slippage with each reset.
Does this movement have a "snap" reset to zero, like the V7750?
__________________
John
HondaLover
HondaLover
HondaLover
HondaLover
#245
Today, 11:15 AM
Tandi
Senior Member
Senior Geek
Join Date: May 2010
Posts: 414
Quote:
Originally Posted by HondaLover
Perhaps the hole in the chrono second hand is a bit big, allowing a little slippage with each
reset.
Does this movement have a "snap" reset to zero, like the V7750?
Yes, the DD has a flyback function or "snap"
Tandi
Tandi
Tandi
Tandi
Tandi
#246
Today, 11:18 AM
reliefcp
Senior Member
True WatchGeek
Join Date: May 2009
Location: Everett Wa.
Posts: 7,103
Real Name: C.J.
No problems with mine just on the fence if I will keep it or not. Lume and bracelet could be
much better but I dont have anything like this in my collection now. The small dial opening is a
plus and its really not any bigger than my 45mm Victorinox Valgrange. Chronos can be touchy
and I dont try to break them by testing them over and over. When we used to break in brand new
boats we took them on sea trials for weeks until we could create a problem then try to correct it
then try to break it again.Maybe this step isnt taken in the watch industry by certain brands so
the consumer does the testing.I hope the OP gets the resolution he is looking for.
__________________
reliefcp
reliefcp
reliefcp
reliefcp
#247
Today, 11:25 AM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by X-James
I really have no dog in this discussion but mentioning borderline abuse makes me wonder
something.
This is a Speedway model watch and designed to check speeds and such at lets say a race like
the Daytona 500 this weekend. Lets just say a person who purchased this watch goes to the
race and decides to use his new Speedway to check lap times throughout the race. He may do
that 5, 10, 20 or 30, 40 or even 50 times over the course of the couple of hours.
Is it borderline abuse for him to do that? Would he be wrong in hoping that his watch would
work perfectly each and every time? I'm sorry Nick but I don't understand the borderline
abuse part of it. The watch in question is a stopwatch. What is normal operation of a
stopwatch?
Like I said I have no dog in this but its a stopwatch that should be able to used like a
stopwatch.
Well I have a few dogs in this race and what you are describing would
be normal use . I picture someone sitting their push stop, push stop,
push stop 20 times in a row no reason for that. Test it of course but to
sit and try it like the way it has been described seems like overkill.
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#248
Today, 11:30 AM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by pam29188
I was told by Tourneau and other AD that I should be careful with my Breitling Navitimer
using the the 7750 Chrono movement. I wondered WTF as seeing it's a $5,000 timepiece, it
should take some abuse and should reset to 0 all the time.
However, after reading across all the forums here and other sites, common conclusion was
there is NO chrono movement out there that will last forever. Some people are tough on the
chrono pushers and the torque you apply to the pusher may break something inside. NO
chrono watch is free from this type of behavior (Breitling, Omega, etc). Go and speak to an
honest Tourneau or AD tech person.
You have other issues like people going back and forth on whether you should run your
chronos for long periods of time...and I say why not?!!, it's got a 12 or 24 hour totalizer right?
But I've learned to understand, these movements are complex with small sensitive parts inside,
so I'm not expecting it to take excessive abuse...if you want to abuse pushers, drop watches,
etc., then go buy the quartz version and worry less. You buy hand built mechanical
movements, expect something to eventually go if you use constantly or excessively...as with
cars and homes, that's part of the ownership experience.
To the OP, I'm bummed you got a bad movement from Invicta, but it happens to ALL
manufacturers. It just gets magnified here by some trolls and member reactions. Send it back
and get a new one and call it a day.
I wouldn't mention that you cycled it 20-30times though as I'm sure you will definitely be
refused a repair or return based on that.
Good luck.
WOW someone spoke to a real expert and was told good information
for a change , not just an opinion .
I thank you for this post it is very credible and helpful.
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#249
Today, 11:57 AM
DiveMaster
Senior Member
Senior Geek
Join Date: Oct 2009
Location: NJ
Posts: 249
Real Name: Juice
Valid point
Quote:
Originally Posted by X-James
I really have no dog in this discussion but mentioning borderline abuse makes me wonder
something.
This is a Speedway model watch and designed to check speeds and such at lets say a race like
the Daytona 500 this weekend. Lets just say a person who purchased this watch goes to the
race and decides to use his new Speedway to check lap times throughout the race. He may do
that 5, 10, 20 or 30, 40 or even 50 times over the course of the couple of hours.
Is it borderline abuse for him to do that? Would he be wrong in hoping that his watch would
work perfectly each and every time? I'm sorry Nick but I don't understand the borderline
abuse part of it. The watch in question is a stopwatch. What is normal operation of a
stopwatch?
Like I said I have no dog in this but its a stopwatch that should be able to used like a
stopwatch.
Most people just want the watch for the look. What if you want to use the functions daily? I
have not heard of a duty cycle for a watch or stopwatch. It should perform its functions properly
for years.
Regards Juice
DiveMaster
DiveMaster
DiveMaster
DiveMaster
DiveMaster
#250
Today, 12:05 PM
X-James
Senior Member
Senior Geek
Join Date: May 2010
Posts: 476
Quote:
Originally Posted by Chief68
Well I have a few dogs in this race and what you are describing
would be normal use . I picture someone sitting their push stop, push
stop, push stop 20 times in a row no reason for that. Test it of course
but to sit and try it like the way it has been described seems like
overkill.
To operate and reset the chrono 40 or 50 times at a race would be doing it on an average of once
every 4 to 5 minutes and the original OP stated he did it about 20 times in 1 hour which averages
to once every 3 minutes.
Nick, I just don't understand the abuse vs. normal use part of it. Like I said I have no dogs in this
race but I would think that an $800 stopwatch should function flawlessly each and every time
you operate it, especially a watch design to be used as a timing device and stopwatch like the
Speedway model.
timeman
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Long Island, New York
Posts: 6,295
Real Name: Jerry
I have never heard from any movement manufacturer of a recommended rest period between
chronograph activations. If the chronograph is started, stopped and reset, it shouldn't matter
what time interval is between activations. If you did 20 activations in an hour, is not abusive use
in my opinion.
__________________
timeman
timeman
timeman
timeman
#252
Today, 12:23 PM
WatchYaThink
Senior Member
Master WatchGeek
Join Date: Sep 2008
Location: Sunnyvale, CA
Posts: 3,445
Real Name: Larry
Quote:
Originally Posted by pam29188
To the OP, I'm bummed you got a bad movement from Invicta, but it happens to ALL
manufacturers. It just gets magnified here by some trolls and member reactions. Send it back
and get a new one and call it a day.
I wouldn't mention that you cycled it 20-30times though as I'm sure you will definitely be
refused a repair or return based on that.
Really?? Is it actually your opinion that simply cycling the chrono 20 times would void the
warranty?
__________________
My computer has never had an undetected error ..... as far as I know.
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
#253
Today, 12:25 PM
HeavyChevy
Senior Member
Super Geek
Join Date: Mar 2008
Location: Michiana
Posts: 1,715
Real Name: Bruce
Quote:
Originally Posted by Chief68
Well I have a few dogs in this race and what you are describing
would be normal use . I picture someone sitting their push stop, push
stop, push stop 20 times in a row no reason for that. Test it of course
but to sit and try it like the way it has been described seems like
overkill.
From the OP:
"UPDATE 2:
Just wanted to clear the "20 times" thing up.
I did not do it 20 times in a row over and over ... just over a period of approx 1 hour.
Would activate it, let it run for 15 - 45 secs and then reset. .. wait a little while then do it again.I
did not "torture" test the watch!"
HeavyChevy
HeavyChevy
HeavyChevy
HeavyChevy
HeavyChevy
#254
Today, 12:30 PM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by X-James
To operate and reset the chrono 40 or 50 times at a race would be doing it on an average of
once every 4 to 5 minutes and the original OP stated he did it about 20 times in 1 hour which
averages to once every 3 minutes.
Nick, I just don't understand the abuse vs. normal use part of it. Like I said I have no dogs in
this race but I would think that an $800 stopwatch should function flawlessly each and every
time you operate it, especially a watch design to be used as a timing device and stopwatch like
the Speedway model.
Well that is why people are entitled to an opinion and that was mine.
It also seems like some watch experts agreed with me as well.
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#255
Today, 12:31 PM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by HeavyChevy
From the OP:
"UPDATE 2:
Just wanted to clear the "20 times" thing up.
I did not do it 20 times in a row over and over ... just over a period of approx 1 hour.
Would activate it, let it run for 15 - 45 secs and then reset. .. wait a little while then do it
again.I did not "torture" test the watch!"
Why are you just copying other posts Bruce -
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#256
Today, 12:33 PM
jimmyv
Senior Member
Super Geek
Join Date: Nov 2009
Location: Phoenix, Arizona
Posts: 1,291
Real Name: Jim
Quote:
Originally Posted by HeavyChevy
From the OP:
"UPDATE 2:
Just wanted to clear the "20 times" thing up.
I did not do it 20 times in a row over and over ... just over a period of approx 1 hour.
Would activate it, let it run for 15 - 45 secs and then reset. .. wait a little while then do it
again.I did not "torture" test the watch!"
I tried to point out as well earlier in the thread that he also said it gradually started resetting to a
different spot which didn't mean it was fine for 20 and then BAM it went bad. Just sounds like it
slowly got worse and worse over 20 uses and for me I would rather know that while it's still in
the looking over process and not after 32 days when the return policy is up and you need to deal
with Invicta to get it fixed.
jimmyv
jimmyv
jimmyv
jimmyv
#257
Today, 12:36 PM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by jimmyv
I tried to point out as well earlier in the thread that he also said it gradually started resetting
to a different spot which didn't mean it was fine for 20 and then BAM it went bad. Just sounds
like it slowly got worse and worse over 20 uses and for me I would rather know that while it's
still in the looking over process and not after 32 days when the return policy is up and you
need to deal with Invicta to get it fixed.
I would believe he is sending it back to Shop as well as it should be. This thread went too
far off the original statement that the comments are not directed at him anymore. __________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#258
Today, 12:40 PM
pam29188
Senior Member
Senior Geek
Join Date: Mar 2008
Posts: 187
Watchyathink:
It is my opinion that Invicta or ShopNBC could take the stance and say that 20-30 cycles over a
short time could be abuse, so the OP would be wise to play it safe and say the movement went
bad while in the warranty period and I would like a replacement.
Makes sense don't you think? or would some detail in how the movement went bad along with
some flaming words toward customer service help the OP's cause in this instance?
pam29188
pam29188
pam29188
pam29188
#259
Today, 12:51 PM
HondaLover
Senior Member
Master WatchGeek
Join Date: Mar 2008
Location: Chapel Hill, North Carolina
Posts: 2,700
Real Name: John
I would bet the OP's watch has a chrono second hand that is not firmly attached, slipping during
resets. (Nothing wrong with the base movement)
__________________
John
HondaLover
HondaLover
HondaLover
HondaLover
#260
Today, 12:58 PM
WatchYaThink
Senior Member
Master WatchGeek
Join Date: Sep 2008
Location: Sunnyvale, CA
Posts: 3,445
Real Name: Larry
Quote:
Originally Posted by pam29188
It is my opinion that Invicta or ShopNBC could take the stance and say that 20-30 cycles over
a short time could be abuse
.... or would some detail in how the movement went bad along with some flaming words
toward customer service help the OP's cause in this instance?
First, I don't think that 20 cycles is anywhere even close to "abuse".
Second, I think that detail about how the movement went bad would be useful information to
pass along .... I don't know why you felt you had to the "flaming words" part???
__________________
My computer has never had an undetected error ..... as far as I know.
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
WatchYaThink
#261
Today, 01:08 PM
Blade
Senior Member
Super Geek
Join Date: Jan 2010
Posts: 1,293
Quote:
Originally Posted by Leed24
Although I agree with the expensive $800 comment, I really don't believe that we watch
collectors buy these watches to use as an industrial stop watch. Most buy because they might
occasionally time something. Most of us buy chronographs because we like the look of the
watch. The people on this site have become obsessed with purposefully trying to break this
watch, and it is ridiculous.
The thing I find ridiculous are the numerous issues experienced with Invicta's higher-end
timepieces. For timepieces with this price tag and above, they should be flawless, imo. The
chrono issue is not the only issue reported with this model, and we don't even need to go into the
prior model. Pretty sad if you ask me. I own a significant number of Invicta timepieces and have
had my share of issues as well, but I still continue to purchase the brand.
__________________
Blade
Blade
Blade
Blade
#262
Today, 01:12 PM
Blade
Senior Member
Super Geek
Join Date: Jan 2010
Posts: 1,293
Quote:
Originally Posted by X-James
I really have no dog in this discussion but mentioning borderline abuse makes me wonder
something.
This is a Speedway model watch and designed to check speeds and such at lets say a race like
the Daytona 500 this weekend. Lets just say a person who purchased this watch goes to the
race and decides to use his new Speedway to check lap times throughout the race. He may do
that 5, 10, 20 or 30, 40 or even 50 times over the course of the couple of hours.
Is it borderline abuse for him to do that? Would he be wrong in hoping that his watch would
work perfectly each and every time? I'm sorry Nick but I don't understand the borderline
abuse part of it. The watch in question is a stopwatch. What is normal operation of a
stopwatch?
Like I said I have no dog in this but its a stopwatch that should be able to used like a
stopwatch.
I agree 100%. It is in no way abusive. It should work perfectly. If the watch isn't intended to be
used for that function or is prone to failure after repeated use, they should provide a disclaimer...
obviously I'm being facetious, but my point is that it should not fail.
__________________
Blade
Blade
Blade
Blade
#263
Today, 01:15 PM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by Blade
I agree 100%. It is in no way abusive. It should work perfectly. If the watch isn't intended to be
used for that function or is prone to failure after repeated use, they should provide a
disclaimer... obviously I'm being facetious, but my point is that it should not fail.
Do you own any of the Speedway's with the DD module?
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#264
Today, 01:21 PM
pam29188
Senior Member
Senior Geek
Join Date: Mar 2008
Posts: 187
Quote:
Originally Posted by WatchYaThink
First, I don't think that 20 cycles is anywhere even close to "abuse".
Second, I think that detail about how the movement went bad would be useful information to
pass along .... I don't know why you felt you had to the "flaming words" part???
The first part of your response is exactly why the OP should not mention how the movement
went bad. YOU don't think so, but try arguing that with EYAL and Co or Shop NBC if they
were to take the stance I mentioned.
You're right I would like to strike the flaming words part from my earlier response...however no
need to flaming words like in the OP's title for this thread either...right?
pam29188
pam29188
pam29188
pam29188
#265
Today, 01:23 PM
mdhorner
Senior Member
Master WatchGeek
Join Date: Oct 2009
Location: Chicago, IL
Posts: 3,185
Real Name: Michael
Quote:
Originally Posted by Blade
I agree 100%. It is in no way abusive. It should work perfectly. If the watch isn't intended to be
used for that function or is prone to failure after repeated use, they should provide a
disclaimer... obviously I'm being facetious, but my point is that it should not fail.
+1. It's a chrono and should be used as such if one wants. There is no way to justify it breaking
even if used 20 times in an hour. This is not a watch from a gumball machine where one might
not expect much, but big bucks are on the line here (at least from my perspective).
I'm just glad mine works as it needs to.
__________________
A flush always beats a straight unless the guy with the straight
carries a gun. -Norman Chad
mdhorner
mdhorner
mdhorner
mdhorner
#266
Today, 01:38 PM
harlee987
Member
Member Geek
Join Date: Aug 2010
Location: Surprise Az. No really. The town is really named Surprise!
Posts: 54
Real Name: Lee
You know, I've often wondered when i hear Michael talking on Shop about how Invicta
always has around 1400 timepieces in development, how it would be possible to maintain
dood QC while producing that kind of volume? I love my Invitas and even crusade for
them with people unfamiliar with the brand, I'm a little more careful these days, which is
why I didn't pull the trigger for almost $800 for the DD.. as much as I wanted to!
harlee987
harlee987
harlee987
harlee987
#267
Today, 01:45 PM
iuoe406
Senior Member
Senior Geek
Join Date: Mar 2010
Location: denham springs la.
Posts: 155
Real Name: james stafford
Quote:
Originally Posted by battleshipduke
My Invicta Leviathan 7750 just did 20 cycles in a row with no problems. That's why
Horologists agree that the Invicta Leviathan is the greatest time telling instrument ever
devised as well as the finest watch...in the world.
Just did my SANiv 30x in a row no sweat man I love that watch
iuoe406
iuoe406
iuoe406
iuoe406
iuoe406
#268
Today, 01:58 PM
bioya58
Senior Member
Super Geek
Join Date: Mar 2009
Location: The Great Northwest
Posts: 1,039
Real Name: Steve
took me along time to read thriugh 267 posts. One thing is clear, there are alot of very die hard
Invictas fans weighing in on this one. Best not to bad mouth the big I. Personally I thought Brad
(flyback's) posts were the most reasonable. I own a boatload of Invictas but I am in no hurry to
own the DD speedways. On a lighter note; give me the eta G10, if the movement fails I'll replace
it with another plastic one... LOL
bioya58
bioya58
bioya58
bioya58
#269
Today, 02:03 PM
Panda03Bear
Senior Member
True WatchGeek
Join Date: Jul 2009
Location: Silver Spring, MD.
Posts: 10,279
Real Name: Adam
if you keep doing it, eventually itll be back to zero
__________________
- Family, that's what's up - Black Eye Dye
Panda03Bear
Panda03Bear
Panda03Bear
Panda03Bear
Panda03Bear
#270
Today, 02:09 PM
Chief68
WatchGeeks Moderator
True WatchGeek
Join Date: Jan 2009
Location: Staten Island New York
Posts: 13,621
Real Name: Nick
Quote:
Originally Posted by battleshipduke
My Invicta Leviathan 7750 just did 20 cycles in a row with no problems. That's why
Horologists agree that the Invicta Leviathan is the greatest time telling instrument ever
devised as well as the finest watch...in the world.
Quote:
Originally Posted by iuoe406
Just did my SANiv 30x in a row no sweat man I love that watch
We are all adults here and able to make our own decisions but I really
do not see the need to take any watch and keep pressing buttons to
prove a point. If your watch is working fine leave it be.
__________________
NYPD Emergency
Service Unit
Chief68
Chief68
Chief68
Chief68's
Chief68
Chief68
#271
Today, 03:00 PM
jimmyv
Senior Member
Super Geek
Join Date: Nov 2009
Location: Phoenix, Arizona
Posts: 1,291
Real Name: Jim
Mine just got dropped off and seems like a winner so far. I snapped a couple IPhone pics of the
packaging and did a little video of two chrono resets from :15 and :45 seconds so we could see
from both sides and both went well. It's uploading now but will throw the pics up for the time
being in a separate thread.
jimmyv
jimmyv
jimmyv
jimmyv
#272
Today, 03:18 PM
kissfan
Senior Member
Veteran Geek
Join Date: Nov 2008
Posts: 610
Some people will never admit that any of invicta's problems are real. That being said, after
reading all of the posts I decided to do my own test. So I pulled out my cheap chinese auto
chrono that I bought off of ebay a couple of years ago.
it has never kept really good time so I just never wear it. But I got it going and started the crono
let it run for about five seconds, stopped it and reset it. I did this as fast as I could for 35 times in
a row. Not only did it not break, but it did reset to zero EVERY time.
please keep in mind this is a very cheap chinese automatic chrono, but it does perform the way it
is designed to even after my "unreal torture " test.
please don't start piling on me, I'm. Just telling you my results with a cheap watch.
__________________
Muscle Shoals, Alabama 35661
kissfan
kissfan
kissfan
kissfan
#273
Today, 03:20 PM
BabyDoc
Senior Member
Super Geek
Join Date: Mar 2010
Location: Beachwood, OHIO
Posts: 1,458
Real Name: Bill
LOOK, I reported this problem before in another thread. But believe me, there is a problem with
at least a few of these movements. My Black DD Speedway arrived with the chrono hand
correctly positioned at 12 oclock. BUT, the very first time I ran the watch, it didn't reset
correctly. I didn't run it 20 times to see that it was messed up. I only ran it once. However, the
more often I DID run the chrono, just like the OP here reported, the reset became more off the
mark. AND if I let the chrono run, the entire watch came to a stop after a few minutes, only to
start up again when I stopped the chrono.
I have since received my silvertone DD Speedway (199/250). The chrono runs perfectly and
resets perfectly, repeatedly. I don't think I have done this 20 times but at least a half dozen times.
I am very happy with how it functions. (HOWEVER, it remains to be seen whether I am going
to be keeping this version (199/250), BECAUSE so far, it doesn't keep time very well. It has
gained 15 seconds overnight in just 6 hours, bezel up, off my wrist. I am hoping it will settle
down.) I really otherwise love the watch.
BTW, I saw that demonstration on TV when the watch didn't reset to zero. I ordered the watch
anyway, not believing my eyes.
One other comment. I have many Invictas. I have never had an issue with any of them. The fact
that there is a problem now with at least 2 of these samples of the new DD Speedway(perhaps 3,
if we include the TV watch that was reported as dropped), doesn't mean much. I'll be the first
one to say that, even though, I am dissappointed with my particular sample. Still it important for
people with similar issues, to report these issues, should a pattern emerge that needs to be ressed.
I personally, don't think the OP screwed up his watch by running it 20 times in a row. (I could be
wrong, but I base my opinion on having done this with other 7750 chrono's I own.) Sure, the
ETA 2892/DD movement may be more delicate than a 7750, but if it was, I am not sure I would
want to own one. The only way I believe anyone could possibly damage ANY automatic chrono
movement would be to forcefully push the reset button while the chrono was running, and that's
really difficult to do.
Now many people here seem to feel that only happy owners should report their new watch
experiences. They feel that the rest of us with problems, being the exceptions, should just keep
our mouths shut. We should just get our watches repaired, exchanged, or ask for a refund. I hope
that's not what the majority wants. Is so, we should make it a forum rule to report just happy
experiences. I don't think we should do that, but rather be careful HOW we report negative
experiences, so that it becomes just a case report and not a degradation of a company or a watch
model. While there may be a tendency to exaggerate the significance of any single report, (I
haven't), let others decide what they want to believe or not, or what to do with the reports. I
didn't believe what I saw on TV when the watch didn't reset, and bought the watch anyway. I
took a chance and lost. Most people have won buying this watch. I am not crying about it. I am a
big boy. Other than disappointment and some trouble of returning the watches, I haven't lost
anything.
BabyDoc
BabyDoc
BabyDoc
BabyDoc
#274
Today, 03:37 PM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by BabyDoc
LOOK, I reported this problem before in another thread. But believe me, there is a problem
with at least a few of these movements. My Black DD Speedway arrived with the chrono hand
correctly positioned at 12 oclock. BUT, the very first time I ran the watch, it didn't reset
correctly. I didn't run it 20 times to see that it was messed up. I only ran it once. However, the
more often I DID run the chrono, just like the OP here reported, the reset became more off the
mark. AND if I let the chrono run, the entire watch came to a stop after a few minutes, only to
start up again when I stopped the chrono.
I have since received my silvertone DD Speedway (199/250). The chrono runs perfectly and
resets perfectly, repeatedly. I don't think I have done this 20 times but at least a half dozen
times. I am very happy with how it functions. (HOWEVER, it remains to be seen whether I am
going to be keeping this version (199/250), BECAUSE so far, it doesn't keep time very well. It
has gained 15 seconds overnight in just 6 hours, bezel up, off my wrist. I am hoping it will
settle down.) I really otherwise love the watch.
BTW, I saw that demonstration on TV when the watch didn't reset to zero. I ordered the watch
anyway, not believing my eyes.
One other comment. I have many Invictas. I have never had an issue with any of them. The fact
that there is a problem now with at least 2 of these samples of the new DD Speedway(perhaps
3, if we include the TV watch that was reported as dropped), doesn't mean much. I'll be the
first one to say that, even though, I am dissappointed with my particular sample. Still it
important for people with similar issues, to report these issues, should a pattern emerge that
needs to be ressed. I personally, don't think the OP screwed up his watch by running it 20
times in a row. (I could be wrong, but I base my opinion on having done this with other 7750
chrono's I own.) Sure, the ETA 2892/DD movement may be more delicate than a 7750, but if it
was, I am not sure I would want to own one. The only way I believe anyone could possibly
damage ANY automatic chrono movement would be to forcefully push the reset button while
the chrono was running, and that's really difficult to do.
Now many people here seem to feel that only happy owners should report their new watch
experiences. They feel that the rest of us with problems, being the exceptions, should just keep
our mouths shut. We should just get our watches repaired, exchanged, or ask for a refund. I
hope that's not what the majority wants. Is so, we should make it a forum rule to report just
happy experiences. I don't think we should do that, but rather be careful HOW we report
negative experiences, so that it becomes just a case report and not a degradation of a
company or a watch model. While there may be a tendency to exaggerate the significance of
any single report, (I haven't), let others decide what they want to believe or not, or what to do
with the reports. I didn't believe what I saw on TV when the watch didn't reset, and bought the
watch anyway. I took a chance and lost. Most people have won buying this watch. I am not
crying about it. I am a big boy. Other than disappointment and some trouble of returning the
watches, I haven't lost anything.
Agreed along with video proving that it actually is faulty, if no video no Thread! If you cant
afford a camera then sorry NO Thread!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#275
Today, 03:40 PM
rjones1994
Senior Member
Super Geek
Join Date: Mar 2008
Location: Sanford, Florida
Posts: 1,638
Real Name: BOB
I just hope this is a very small problem. I have the two tone comming next week. Invicta should
be able not to repeat a problem.
tj6988@sbcglobal.net
Senior Member
Super Geek
Join Date: Feb 2010
Location: TEXAS
Posts: 1,340
Real Name: Tina/Tj
rofl
Quote:
Originally Posted by RipitRon
DONT READ!
__________________
Tina/Tj
tj6988@sbcglobal.net
tj6988@sbcglobal.net
tj6988@sbcglobal.net
tj6988@sbcglobal.net
tj6988@sbcglobal.net
#277
Today, 03:43 PM
NG111
Senior Member
Master WatchGeek
Join Date: Jun 2008
Location: Santa Clarita, CA
Posts: 3,854
Real Name: Nate
Quote:
Originally Posted by kissfan
Some people will never admit that any of invicta's problems are real. That being said, after
reading all of the posts I decided to do my own test. So I pulled out my cheap chinese auto
chrono that I bought off of ebay a couple of years ago.
it has never kept really good time so I just never wear it. But I got it going and started the
crono let it run for about five seconds, stopped it and reset it. I did this as fast as I could for 35
times in a row. Not only did it not break, but it did reset to zero EVERY time.
please keep in mind this is a very cheap chinese automatic chrono, but it does perform the way
it is designed to even after my "unreal torture " test.
please don't start piling on me, I'm. Just telling you my results with a cheap watch.
That sounded like a pretty good test, similar (and even more stressful on the watch) to the OPs
experience. I don't have a dog in this race either so I decided to do your test with a Renato
Wilde-Beast, too. What the heck, right?
Well, you know what happened, Kissfan? Absolutely nothing. No problems of any kind, no
concerns, perfect. The chrono hand is sitting nicely in the middle of the 12 still...just like its
supposed to.
NG111
NG111
NG111
NG111
NG111
#278
Today, 03:43 PM
BigBully
Senior Member
True WatchGeek
Join Date: Aug 2009
Location: Long Island, NY
Posts: 5,048
it seems like the movemnts modified with the DD seem to often have issues when Invicta puts
them into one fo their watches... didnt problems arise last time also...?
__________________
BigBully
BigBully
BigBully
BigBully
BigBully
#279
Today, 03:54 PM
Flyback
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Northern CA
Posts: 21,935
Real Name: Brad
Quote:
Originally Posted by RipitRon
Agreed along with video proving that it actually is faulty, if no video no Thread! If you cant
afford a camera then sorry NO Thread!
Ron I think I missed the coronation. Did someone crown you King?
__________________
If n = the number of watches you have, then n + 1 = the number of watches you need!
Flyback
Flyback
Flyback
Flyback
#280
Today, 03:56 PM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by Flyback
Ron I think I missed the coronation. Did someone crown you King?
Nothing more then a suggestion Brad, nothing more then a suggestion.
However I have been king in my mind as long as I can remember, and to be honest if you or
anyone else doesnt like it......well my man IDGAS!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#281
Today, 04:00 PM
Flyback
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Northern CA
Posts: 21,935
Real Name: Brad
Quote:
Originally Posted by RipitRon
. . . and to be honest if you or anyone else doesnt like it......well my man IDGAS!
Had to consult the Urban Dictionary to decipher that one and now I clearly understand your
viewpoint.
__________________
If n = the number of watches you have, then n + 1 = the number of watches you need!
Flyback
Flyback
Flyback
Flyback
#282
Today, 04:02 PM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by Flyback
Had to consult the Urban Dictionary to decipher that one and know I clearly understand your
viewpoint.
Good deal!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#283
Today, 04:02 PM
Blade
Senior Member
Super Geek
Join Date: Jan 2010
Posts: 1,293
Some people are focusing on the repetition and rate of repetition of utilizing the chrono function
and say (or imply) that this is the reason for the failure -- reason being stress (or abuse) of the
mechanism. I would like to know how such a small number of cycles at the rate of repetition
stated in this thread could cause the mechanism to fail, versus the same number of cycles over a
longer period of time with "rest" periods between the cycles. Is there some type of "rest" period
that should be adhered to when using the function, and if so, what occurs (some type of "stress
recovery") during this "rest" period that would prevent the mechanism from failing during future
executions?
__________________
Blade
Blade
Blade
Blade
#284
Today, 04:04 PM
Blade
Senior Member
Super Geek
Join Date: Jan 2010
Posts: 1,293
Quote:
Originally Posted by RipitRon
Agreed along with video proving that it actually is faulty, if no video no Thread! If you cant
afford a camera then sorry NO Thread!
Does the same apply to those who claim theirs works perfectly?
__________________
Blade
Blade
Blade
Blade
#285
Today, 04:05 PM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by Blade
Does the same apply to those who claim theirs works perfectly?
At this time does a "Mine works perfectly" thread does not create a $*it storm, so the answer is
no!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#286
Today, 04:06 PM
soberdave09
Senior Member
True WatchGeek
Join Date: Sep 2009
Location: philadelphia
Posts: 6,391
Real Name: david b.
__________________
soberdave09
soberdave09
soberdave09
soberdave09
soberdave09
#287
Today, 04:07 PM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by soberdave09
LOL!
Perfect timing!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#288
Today, 04:08 PM
Blade
Senior Member
Super Geek
Join Date: Jan 2010
Posts: 1,293
Quote:
Originally Posted by RipitRon
At this time does a "Mine works perfectly" thread does not create a $*it storm, so the answer
is no!
Why is posting one's issue with their timepiece considered a "$*it storm"? I don't believe I read
anything in this thread bashing Invicta.
__________________
Blade
Blade
Blade
Blade
#289
Today, 04:09 PM
strutn45
Senior Member
True WatchGeek
Join Date: Mar 2009
Location: "Da Swamp" LA.
Posts: 11,698
Real Name: John "DID DAT"
Quote:
Originally Posted by soberdave09
__________________
strutn45
strutn45
strutn45
strutn45
#290
Today, 04:10 PM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by Blade
Why is posting one's issue with their timepiece considered a "$*it storm"? I don't believe I
read anything in this thread bashing Invicta.
You are right and not the norm though, however Bashing isnt the only issue here speculation is
90% of the problem in fighting is also a problem. Having facts to back up a claim is always a
better method.
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#291
Today, 04:10 PM
harlan.mcDonald@gmail.com
Member
Member Geek
Join Date: Nov 2010
Posts: 96
Real Name: Harlan
Ron, you are tied for "Top Poster" in this thread
Do you even own this watch?
harlan.mcDonald@gmail.com
harlan.mcDonald@gmail.com
harlan.mcDonald@gmail.com
harlan.mcDonald@gmail.com
#292
Today, 04:11 PM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by harlan.mcDonald@gmail.com
Ron, you are tied for "Top Poster" in this thread
Do you don't even own this watch?
Not now I am #1!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#293
Today, 04:12 PM
tj6988@sbcglobal.net
Senior Member
Super Geek
Join Date: Feb 2010
Location: TEXAS
Posts: 1,340
Real Name: Tina/Tj
LMAO __________________
Tina/Tj
tj6988@sbcglobal.net
tj6988@sbcglobal.net
tj6988@sbcglobal.net
tj6988@sbcglobal.net
tj6988@sbcglobal.net
#294
Today, 04:16 PM
mdhorner
Senior Member
Master WatchGeek
Join Date: Oct 2009
Location: Chicago, IL
Posts: 3,185
Real Name: Michael
This is getting pretty stupid, but like a car crash....
__________________
A flush always beats a straight unless the guy with the straight
carries a gun. -Norman Chad
mdhorner
mdhorner
mdhorner
mdhorner
#295
Today, 04:17 PM
Flyback
Senior Member
True WatchGeek
Join Date: Mar 2008
Location: Northern CA
Posts: 21,935
Real Name: Brad
Quote:
Originally Posted by RipitRon
You are right and not the norm though, however Bashing isnt the only issue here speculation
is 90% of the problem in fighting is also a problem. Having facts to back up a claim is always
a better method.
This is shared interest forum not a scientific symposium where theorems are set forth and
substantiated for peer review. Every shared interest forum I've belonged to, and not just
regarding watches is largely based on preference/opinion and those with varying viewpoints
should be able to state and debate their position freely so long as it is done within the TOS of the
forum - without someone trying to shout them or the topic down. Of course if you belong to the
school of IDGAS, perhaps this doesn't apply.
__________________
If n = the number of watches you have, then n + 1 = the number of watches you need!
Flyback
Flyback
Flyback
Flyback
#296
Today, 04:19 PM
RipitRon
Senior Member
Master WatchGeek
Join Date: Jan 2009
Location: Vancouver, Wa
Posts: 3,754
Quote:
Originally Posted by Flyback
This is shared interest forum not a scientific symposium where theorems are set forth and
substantiated for peer review. Every shared interest forum I've belonged to, and not just
regarding watches is largely based on preference/opinion and those with varying viewpoints
should be able to state and debate their position freely so long as it is done within the TOS of
the forum - without someone trying to shout them or the topic down. Of course if you belong to
the school of IDGAS, perhaps this doesn't apply.
Thanx for the heads up!
__________________
Hmmmmmmm. I can't say what I want to say!
RipitRon
RipitRon
RipitRon
RipitRon
#297
Today, 04:19 PM
soberdave09
Senior Member
True WatchGeek
Join Date: Sep 2009
Location: philadelphia
Posts: 6,391
Real Name: david b.
__________________
soberdave09
soberdave09
soberdave09
soberdave09
soberdave09
#298
Today, 04:22 PM
MATTNATTI
Senior Member
Master WatchGeek
Join Date: Apr 2010
Location: Ohio
Posts: 2,753
Quote:
Originally Posted by harlan.mcDonald@gmail.com
Ron, you are tied for "Top Poster" in this thread
Do you even own this watch?
surprise,surprise!!
__________________
DEATH IN THE NIGHT AC-130U GUNSHIP
(SPOOKY)......protecting soldiers and hunting bad guys in all of the hot spots around the world.
MATTNATTI
MATTNATTI
MATTNATTI
MATTNATTI
#299
Today, 04:28 PM
GeorgeTheWatchGuy
WatchGeeks Moderator
True WatchGeek
Join Date: Mar 2008
Location: OHIO
Posts: 9,412
Ok... Let's take all your personal comments to our PM system,& get
back on topic! Or this one is going to bed...
__________________
"There are Two Types of Pain in this World: The Temporary Pain of Discipline, or the
Permanent Pain of Regret"... GTWG
GeorgeTheWatchGuy
GeorgeTheWatchGuy
GeorgeTheWatchGuy
GeorgeTheWatchGuy
#300
Today, 04:28 PM
JoeGa
Senior Member
Super Geek
Join Date: Jul 2008
Location: Atlanta, Georgia
Posts: 2,288
Real Name: Joe T
Quote:
Originally Posted by mdhorner
This is getting pretty stupid, but like a car crash....
with you there...this has run it's course...
__________________
What ?!? No Watch ?!?
Today, 04:34 PM
mrblue
Senior Member
Master WatchGeek
Join Date: Apr 2009
Posts: 4,172
To GeorgeTheWatchGuy !!
Please George, put this thread to sleep already !!
It's waaaaaaaaaaaaaaaaaaaaaaaaay past it's bedtime !!!!!!!!!!!!!!
lol ........ Blue
mrblue
mrblue
mrblue
mrblue
#302
Today, 04:35 PM
MATTNATTI
Senior Member
Master WatchGeek
Join Date: Apr 2010
Location: Ohio
Posts: 2,753
fourth evening in a row my DD #289/600 is running smooth as silk and the chrono hand resets
to zero as it should.
__________________
DEATH IN THE NIGHT AC-130U GUNSHIP
(SPOOKY)......protecting soldiers and hunting bad guys in all of the hot spots around the world.
MATTNATTI
MATTNATTI
MATTNATTI
MATTNATTI
#303
Today, 04:42 PM
jimmyv
Senior Member
Super Geek
Join Date: Nov 2009
Location: Phoenix, Arizona
Posts: 1,291
Real Name: Jim
Actually Ron, it's usually posts like your witty one liners that get threads like this closed. Also,
if you follow the IDGAS method of thinking then why should anyone care what you have to say.
Just sayin...
Quote:
Originally Posted by RipitRon
At this time does a "Mine works perfectly" thread does not create a $*it storm, so the answer
is no!
jimmyv
jimmyv
jimmyv
jimmyv
#304
Today, 04:44 PM
mdhorner
Senior Member
Master WatchGeek
Join Date: Oct 2009
Location: Chicago, IL
Posts: 3,185
Real Name: Michael
Quote:
Originally Posted by jimmyv
Actually Ron, it's usually posts like your witty one liners that get threads like this closed. Also,
if you follow the IDGAS method of thinking then why should anyone care what you have to
say. Just sayin...
... and boom goes the dynamite.
__________________
A flush always beats a straight unless the guy with the straight
carries a gun. -Norman Chad
mdhorner
mdhorner
mdhorner
mdhorner
#305
Today, 04:46 PM
GeorgeTheWatchGuy
WatchGeeks Moderator
True WatchGeek
Join Date: Mar 2008
Location: OHIO
Posts: 9,412
Quote:
Originally Posted by jimmyv
Actually Ron, it's usually posts like your witty one liners that get threads like this closed. Also,
if you follow the IDGAS method of thinking then why should anyone care what you have to
say. Just sayin...
This one is history!! __________________
"There are Two Types of Pain in this World: The Temporary Pain of Discipline, or the
Permanent Pain of Regret"... GTWG