Post on 25-Apr-2020
transcript
Spent Fuel and Waste Science and Technology
Thermal Modeling: Demo Results
Brady HansonPacific Northwest National Laboratory
SFWST Annual Working Group MeetingLas Vegas, NVMay 23, 2018
PNNL-SA-135207
Spent Fuel and Waste Science andTechnology
High Burnup Spent Fuel Data ProjectResearch Project Cask Loading Map (30.456 kW)
2
Spent Fuel and Waste Science andTechnology TC Lance and PRA Locations
3
Spent Fuel and Waste Science andTechnology Decon Pit
4
Spent Fuel and Waste Science andTechnology Loading Timeline
5
Spent Fuel and Waste Science andTechnology Temperature Locations
6
Spent Fuel and Waste Science andTechnology
Ambient Temperature During Loading and Thermal Soak
7
Spent Fuel and Waste Science andTechnology
Peak TC Temperatures During Vacuum Drying 11/16 0844
Peak TC Lance = 237°C
8
Spent Fuel and Waste Science andTechnology
Steady State TC Temperatures 11/28 1609
Peak TC Lance = 229°C
9
Spent Fuel and Waste Science andTechnology
Temperature History- Hottest Cell
10
Spent Fuel and Waste Science andTechnology
Temperature History – Coolest Cell
11
Spent Fuel and Waste Science andTechnology External Surface Temperature Measurements
12