Pilot’s GuideManuel de pilotagePilotenhandbuchPilotenhandboekManual del Piloto

取扱説明書

40-00-0243 Download The StageScape M20d Advanced Guide @ www.line6.com/manuals Rev B

®

StageScape M20d

CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Important Safety Instructions

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning symbol within a triangle means “electrical caution!” It in-dicates the presence of information about operating voltage and potential risks of electrical shock.

The exclamation point within a triangle means “caution!” Please read the information next to all caution signs.

CAUTIONRISK OF ELECTRIC

SHOCK DO NOT OPEN

SERIAL NO:

Please Note:Line 6 is a trademark of Line 6, Inc. registered in the U.S. and other countries. M20d is a trademark of Line 6, Inc. All rights reserved.

You should read these Important Safety Instructions. Keep these instructions in a safe place

• Readtheseinstructions.• Keeptheseinstructions.• Heedallwarnings.• Followallinstructions.• Donotusethisapparatusnearwater.• Cleanonlywithdrycloth.• Donotblockanyventilationopenings.Installinaccordancewiththemanufacturer’sinstructions.• Donotinstallnearanyheatsourcessuchasradiators,heatregisters,stoves,orotherapparatus(includingamplifiers)thatproduceheat.• ThisapparatusshallbeconnectedtoaMAINSsocketoutletwithaprotectiveearthingconnection.• Donotdefeatthesafetypurposeofthepolarizedorgrounding-typeplug.Apolarizedplughastwobladeswithonewiderthantheother.Agroundingtypeplughastwobladesandathirdgroundingprong.Thewidebladeorthethirdprongareprovidedforyoursafety.Iftheprovidedplugdoesnotfitintoyouroutlet,consult an electrician for replacement of the obsolete outlet.

• Protectthepowercordfrombeingwalkedonorpinchedparticularlyatplugs,conveniencereceptacles,andthepointwheretheyexitfromtheapparatus.• Onlyuseattachments/accessoriesspecifiedbythemanufacturer.• Useonlywiththecart,stand,tripod,bracket,ortablespecifiedbythemanufacturer,orsoldwiththeapparatus.Whenacartisused,usecautionwhenmovingthecart/apparatuscombinationtoavoidinjuryfromtip-over.

• Unplugthisapparatusduringlightningstormsorwhenunusedforlongperiodsoftime.• Referallservicingtoqualifiedservicepersonnel.Servicingisrequiredwhentheapparatushasbeendamagedinanyway,suchaspower-supplycordorplugisdam-

aged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• Theapparatusshallnotbeexposedtodrippingorsplashingandthatnoobjectsfilledwithliquids,suchasvases,shallbeplacedontheapparatus.• WARNING:Toreducetheriskoffireorelectricshockdonotexposethisapparatustorainormoisture.• Theappliancecouplerisusedasthedisconnectdevice,thedisconnectdeviceshallremainreadilyoperable.• ConnectonlytoACpoweroutletsrated:100/120V220/240V50/60Hz(dependingonthevoltagerangeoftheincludedpowersupply).• Prolongedlisteningathighvolumelevelsmaycauseirreparablehearinglossand/ordamage.Alwaysbesuretopractice“safelistening.”• Serviceisrequiredwhentheapparatushasbeendamagedinanyway,suchas: •power-supplycordorplugisdamaged. •liquidhasbeenspilledorobjectshavefallenintotheapparatus. •theunithasbeenexposedtorainormoisture. •theunitisdroppedortheenclosureisdamaged. •theunitdoesnotoperatenormallyorchangesinperformanceinasignificantway.

Apple, iPhone, and iPad are trademarks of Apple Inc. registered in the U.S. and other countries. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Welcome To STageScape m20dThank you for purchasing the StageScape M20d and welcome to a groundbreaking new paradigm in live sound mixing. Featuring a touchscreen visualmixingenvironment,StageScapeM20dstreamlinesandacceleratestheprocessofgettinggreatlivesoundinanintuitive,completesolutionthatinspiresgreatperformances.MassiveDSPpowerdeliverscomprehensiveprofessionalaudioprocessingoneverychannel.Multi-channelrecording,remotecontrolcapabilitiesviaoneormoreiPad®devices,andpristine32-bitfloatingpointaudioqualitymaketheStageScapeM20danidealmixingsolutionforlivesound.(TheM20dremoteapplicationisfree-iPad®andUSBWiFiadapterarenotincluded)

m20d piloT’S guideThis M20d Pilot’s GuidewillprovideyouwithabasicoverviewofthefeaturesandfunctionalityofyourM20d.FormorecomprehensivedetailsonM20dfeaturesandoperation,WiFisetup,andrecordingmediarequirements,pleasevisitwww.line6.com/manuals and download the StageScape M20d Advanced Guide. Whileyou’reonline,besuretoregisteryourM20d.Registeringsetsyouupforwarrantyservice,shouldyouhaveanissuewithyourM20d,andalsoqualifiesyouforspecialoffers,contestsandmore.

m20d onboard HelpTheM20d’ssoftwareprovidesonboardHelp content, including a Quick Start TutorialtohelpyousetupyourM20d.ToaccesstheonboardHelp, select the software INFO button i in the upper right corner of the touchscreen (Top Panel item #11onpage5ofthisPilot’sGuide).Thentouchthe? View Help button in the Info Window and the informative Help system will be displayed on the screen.

ViSual mixingTheM20d’svisualmixingenvironmentbeginswithSETUP mode and the Stage View.Asyouconfigureyouraudioinputs,eitherbypluggingintotheauto-sensingXLRand1/4-inchjacksonthephysicalI/Opanel,orbysimplyselectingStageIconsinthetouchscreenStage Icon Gallery, a visual representationofyourM20d’ssetupwillbeautomaticallyconfiguredanddisplayedonthetouchscreen’sstage.Youcanthenrenameandrearrangethelayoutofyourgeariconstomirroryourband’sphysicalstagesetup,whichmakescontrollingyourlivesoundmixextremelyintuitive.

YouronstagemonitorsandstereomainsspeakersarealsoautomaticallyconfiguredwhenyouconnectthemtotheM20d’saudiooutputs.Youcaneasilyadjust monitor send levels for every channel, and adjust channel level, pan, mute, solo, and more via the touchscreen software. In TWEAK mode you canfine-tunevariousparametersforanychannel,adjustFXsettingsusingtheX-YTweak Pad, or deep dive to adjust individual FX parameters.

The12hardwareencodersarecolorcodedaccordingtotheircurrentlyassignedfunctions,andareuser-customizableforcontrollingvariousparameters.Multi-band Feedback Suppressionisavailableforeveryinputchannel,and4Master FXenginesaddtoeachindividualchannel’sFXpossibilities.AdditionallyyoucanextendtheM20d’svisualmixingparadigmbycontrollinganyofthetouchscreensoftware’sfunctionsviaWiFiusinganiPad®.

m20d FeaTureS

•12high-performance,digitallycontrolled,auto-sensingmic/linecombiinputs(XLRor1/4-inch)

•4additionalauto-sensinglineinputs

•2digitalstreaminginputsdirectfromcomputer,USBdriveorSDcard

•StereolineinputforintegratingMP3playersorothersoundsources

•4auto-sensingmonitoroutputsonbalancedXLRconnectors

•2auto-sensingmainoutputsonbalancedXLRconnectors

•L6LINKmulti-channeldigitalnetworkingforintegratingL6LINK-enabledspeakersystems

•7-inchtouchscreenvisualmixingenvironmentincludingX-YTweakPadformulti-parameterFXcontrol

•RemotecontrolcapabilityviaoneormoreiPad®devicesviaanoptionalUSBWiFiadapter

•Multi-channelrecordingtocomputer,USBdriveorSDcard

•Quick-capturerecordingtointernalmemoryforperformancesoundcheck

•Internal32-bitfloatingpointaudioprocessing

•MassiveDSPpowerprovidesparametricanddynamicEQs,gates,delays,limiters,multi-bandcompressorsandmore

•Multi-bandfeedbacksuppressiononeverymicinput

•4stereomasterFXenginesincludingreverbs,delays,vocaldoublerandmore

•SaveandrecallvirtuallyunlimitedI/Osetups,scenes,andchannelprocessingpresets

Apple, iPhone, and iPad are trademarks of Apple Inc. registered in the U.S. and other countries. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Top panel conTrolS

1. Touchscreen – ThisfullcolortouchscreenisyourwindowintothepoweroftheM20d.

2. Multi-Function Encoders – These twelve push-knobs light up when active, changing color and brightness depending on their current function. Generallytheycontroltheoneortworowsofparametersalongthebottomofthescreen,suchaschannelvolume,monitorvolumeoreffectssettings.

3. Master Volume – ThishardwareencodersetstheoveralloutputleveloftheM20d.

4. Mute Mics Button – Press MUTE MICS tomuteallMicinputs.Thenyoucanoptionallyun-muteoneormoreinputsasdesired.Thiscanbehelpful when the band goes on break, for example, and you want one microphone to remain active for announcements.

5. Mute All Button – Press MUTE ALL tomuteallaudiototheMonitorOuts,MainOuts,andL6LINK-connectedspeakers.NotethataudiotothePhones output is not muted.

6. Setup Button – Press SETUPtoconfigureyourinputsandoutputsandgainaccesstotheStage Icon Gallery.

7. Tweak Button – Press TWEAK toaccessdeeperparameterssuchastoneandeffectssettingsfortheselectediconontheM20d’sstage.

8. Record Button – Press RECORD toaccesscontrolsforrecordingyourperformance;theM20dcanrecordupto16channelsplusthemainmix.

9. Monitor Button – Press MONITOR toenterMonitorMixMode;inthismodeyoucanadjuststagemonitorsendlevelsforallchannels.

10. Perform Button – Press PERFORM toenterPerformMode;thismode“locksdown”variousoperationstopreventaccidentalchangesduringperformance.

11. Info Button – WiththeM20dpoweredon,touchthesoftwareINFO button i in the upper right corner of the touchscreen display to open the Info Window, which gives you access to the onboard Help system and several other functions such as Quick Capture and System Settings.Asnoted previously, select the ? View Help icon to access the Quick Start Tutorial,whichwillassistyouinsettingupyourM20d.

inpuT/ouTpuT panel connecTionS

12. Mic/Line Inputs – Connectmicrophonesorline-levelequipmenttothesetwelvecombiinputs(XLRor1/4-inch).Formicsthatrequirephantompower,48Vphantompowercanbeenabledforeachrowofsixinputsfromthetouchscreensoftware.EachinputjacksenseswhetheranXLRorlineinput is connected, then the touchscreen software adds a microphone or line input icon to the stage accordingly, as well as a Controller Strip for each input.Acontrollerstripissimilartoatraditionalmixer’schannelstrip,inthatitdisplayseachchannel’sgainlevel,encoderposition,mute,soloorrecordenablebutton(dependingoncurrentmode),aswellasthechannel’sname.Controllerstripsaredisplayedatthebottomofthetouchscreenin two rows of six, aligned with the twelve hardware encoders.

13. Line Inputs – Connect1/4-inchline-levelequipmentsuchaskeyboards,DJmixers,drummachinesorguitarmodelershere.Theselineinputsareauto-sensing, so whenever a jack is plugged in, the touchscreen software adds a line input icon to the stage, as well as a controller strip.

14. Monitor Outputs – Connect these XLR outputs to your powered, analog stage monitor speakers. These jacks are auto-sensing, so whenever a monitor is plugged in, the touchscreen software adds a monitor icon to the stage, as well as a controller strip.

15. Main Outputs – ConnecttheseXLRoutputstoyourpowered,analogmainspeakerstohearyourstereomix.OverallleveloftheMainOutsiscontrolledbytheMasterVolume knob on the top panel.

16. Phones – Connect1/4-inchstereoheadphoneshere.HeadphonesvolumeissetbytheadjacentdedicatedPhonesknob.Alwaysusesafelisteningpractices, starting with a low level, then turning up from there if you need more volume.

17. Footswitch Inputs – Connect up to two latching or non-latching footswitches here. Footswitch control preferences can be accessed in the touchscreen software.

18. USB PC – ThisUSB jack lets youconnect toacomputer fordirect recordingandplaybackusingyourexistingcomputer recording software.DownloadtheM20d Advanced Guideonlineatwww.line6.com/manualsforadditionaldetails.

19. USB Host – AttachaUSB2.0harddriveheretorecordandplaybackmultichannelaudiosessionsusingtheM20d’sbuilt-inrecordingandplaybacksoftware.YoucanalsouseUSBstoragetosaveandrecallM20dPresets,orstoreMP3andWAVfiles,whichtheM20dcanplayasbackingtracksormusicbetweensets.ForremotecontrolusinganiPad®,pluginaWiFiadaptorhere.NOTE:notallWiFiadaptersmaybecompatible.PleaseseetheM20d Advanced Guideatwww.line6.com/manualsforcompatibilityguidance.

20. Aux Input – Thisstereo1/8-inchinputisforconnectingtheaudiooutputofanMP3player,portableCDplayer,ormobiledevice.Thisinputisauto-sensing, so whenever a jack is plugged in, the touchscreen software adds an aux input icon to the stage, as well as a controller strip.

21. L6 LINKTM – Thisconnectionprovidesapowerful,proprietarylinkbetweenvariousL6LINK-compatibleproducts,enablingeasy,reliable,one-cableconnectivity.InthecaseofM20d,L6LINK-connectedspeakerscanbedaisy-chained,allowingallproductstosyncandcommunicateuniquelywitheachotherusingtheM20dasthemasterdevice.

22. SD Card Slot – Insertahighquality, fastSDmemorycardheretorecordandplaybackmultichannelaudiosessions,usingtheM20d’sbuilt-in recordingandplayback software.AswithaUSBdrive, youcanalsouseSDcards to saveand recallM20dPresets,or storeMP3andWAVfilesforM20dplayback.PleaseseetheM20d Advanced Guideatwww.line6.com/manualsforguidanceonSDcardspeed,classandformattingrequirements.

Apple, iPhone, and iPad are trademarks of Apple Inc. registered in the U.S. and other countries. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Quick STarT TuTorial oVerVieWThefollowingisanoverviewofthecontentprovidedintheM20dsoftwareQuick Start Tutorial:

Setup Mode •PressSETUPtoenterSetupMode,thenplugadynamicmicintoMicInput#1;agenericmiciconwillautomaticallyappearonthestage,assigned

toChannel1; thecontroller strip forChannel1willalsoappearautomatically; theXLRjack imageontheI/OPanel forMicInput#1willbehighlighted,indicatingavalidMicInputconnection

•PlugapoweredmainsspeakerintoMainsOutL;itsXLRjackimageontheI/OPanelwillbehighlighted,indicatingavalidMainsconnection •Replacethegenericmicicononthestagewitha“FemaleVocal”icon;youdothisbyfirstselectingthegenericmicicon,thenselectingtheFemale

VocaliconintheStageIconGallery;thiswillresultintheFemaleVocaliconreplacingthegenericmicicononthestage

Perform Mode •PressPERFORMtoenterPerformMode;thecontrollerstripsarenowtallerandaMutebuttonisdisplayedforeachassignedcontrollerstrip •AdjusttheFemaleVocalmiclevelbyturninghardwareencoder#1,whichiscolorcodedtomatchtheFemaleVocal’scontrollerstrip#1;the

controllerstripdynamicallydisplaysthemiclevelasyouadjustit;touchthecontrollerstripMutebuttontomutethevocal;touchitagaintoun-mute

Tweak Mode •SelecttheFemaleVocalstageiconthenpressTWEAKtoenterTweakModetoviewtheFemaleVocalchannel’sFXsettings •Selectthe“Tone”FXtab;theToneX-YTweakPadwillbedisplayedonthescreen •MaketheFemaleVocalsoundbrighterbyslidingyourfingerontheX-YTweakPadtowardstheupperrightcorner •AdjustthePanpositionoftheFemaleVocalbyturninghardwareencoder#1,whichiscolorcodedtomatchthedisplayedPanpositionindicator

Advanced Tweak •Touchthe“AdvancedTweak”buttoninTweakModetodisplaytheAdvancedTweakFXparameters •Selectthe“EQ”FXtabandadjustthehighshelffilterbyturningthecolorcodedhardwareencoderassociatedwithit •Adjustthelowfrequencyfilterbyadjustingitscolorcodedhardwareencoders

Input Trim •ManuallyadjusttheInputTrimfortheFemaleVocalchannel •EngageAuto-Trim;theAuto-TrimprocesswillbeexplainedindetailintheQuickStartTutorial

Feedback Suppression •EngageFeedbackSuppressionfortheFemaleVocalchannel •SettheFeedbackSuppressiontypetoVocalMic

Monitor Mixing •EnterSetupMode;plugamonitorintoMonitor Outs A;amonitorspeakericonappearsonthestageandaMonitorcontrollerstripisdisplayed •PressMONITORtoenterMonitorMixMode;adjustthemonitorsendlevelfortheFemaleVocalchannelbyfirstselectingthemonitoriconon

thestagethenturningthehardwareencoderfortheFemaleVocalchannel;adjusttheMonitorlevelbyadjustingitsencoder

Record Mode •PressRECORDtoenterRecordMode;theRecordtransportwillbedisplayed;allinputsdisplayRecordenablebuttons •ConnectahighqualitystoragedevicesuchasaUSB2.0harddrivetotheM20d’sUSB Host connector (item #19onpage7ofthisPilot’sGuide);

armtheFemaleVocalchannelforrecording;pressRecordandrecordsomevocalaudio •Stoprecordingandplaybackyourperformance;adjustchannelsettingsastheaudioplaysback

Building Your Stage View •EnterSetupModeagainandaddmoreinputsbydraggingvariousiconsfromtheStageIconGallerytothestage •Arrangeyourgeariconsonthestagetomirroryourliveband’sstagesetup •Renameoneormoreiconstopersonalizethemtoyourbandmembers

Quick Capture •TouchtheInfobuttononthetouchscreen-theInfoWindowwillopen;presstheQuickCapturebuttontodisplaytheQuickCapturecontrols •PressRecordtocaptureupto20secondsofaudioperformancetotheM20d’sinternalmemory;playitback;itwillloopcontinuously;pressstop

Miscellaneous •OthertopicssuchasPresets,Scenes,UtilitiesandL6LINKsystemsareincludedintheQuickStartTutorial