Post on 31-Mar-2020
transcript
NewCodeOrdering Information
Standard Motor Protection Relay Kits
• Thermal Overload• Locked Rotor• Running Stall – Jam• Vectorial Stall - Start Stall• Unbalanced Current• Single Phasing• Minimum Load – Underload - Dry Run• Earth Leakage• Earth Fault• Short-circuit• Starts per Hour Limitation• Overvoltage – Undervoltage• Phase Rotation• Over Frequency – Under Frequency• Main-Circuit Insulation Failure Lock-Out
• Power Factor Measurement• Power Consumption Measurement• Statistical Data• 1400 Event Records with time and date stamp• 35 Last Fault Records with time and date stamp
• Timers• Real Time Clock (24 Hour)• Starter Controller Logic• Logic Function Blocks• 7 Field Inputs• Motor Parameter Calculator• 4 Programmable Outputs• 3 Phase Recorder• On-board Simulator for Training /
Commissioning• Multiple Communication Protocols
Protection Features:
About
Management Features:
Configurable Automation Features:
A South African Company to be Proud of
The NewCode Relay is an ISO 9001:2008 compliant, three-phase motor protection relay, designed and manufactured in South Africa. It is a micro-controller based precision instrument for three-phase induction motor protection with advanced control logic features as well as multiple motor starter control circuit configurations. The relay is designed for the low voltage motor protection market. The current transformers, including the core balance current transformers are external. Certain models cater for combined current and core balance current transformers, maximum fexibility is maintained by allowing separate C.B.C.T’s with interposing current transformers with a software selectable ,1 to 10 amp secondary winding, Class 1, 5VA.
Complete Motor Protection Solution to Suite :
Physical Address: 298 Soutter Street, Pretoria West Tel: +27 12 327 1729
Fax: +27 (0)12 327 1733 Toll Assist: 0860 10 30 41
www.newelec.co.za sales@newelec.co.za
AboutThe NewCode Relay is an ISO 9001:2008 compliant, three-phase motor protection relay, designed and manufactured in South Africa. It is a micro-controller based precision instrument for three-phase induction motor protection with advanced control logic features as well as multiple motor starter control circuit configurations. The relay is designed for the low voltage motor protection market. The current transformers, including the core balance current transformers are external. Certain models cater for combined current and core balance current transformers, maximum fexibility is maintained by allowing separate C.B.C.T’s with interposing current transformers with a software selectable ,1 to 10 amp secondary winding, Class 1, 5VA.
A South African Company to be Proud of
Standard KitProduct Code DescriptionFPR0650 NewCode MK2
FPR0403 NC-01-110/550 ( 0.1-1Amp 110-550Volt Direct)
BTX0004 C.B.C.T. 1100/1 MOH Steel 43mm ID
FPR0409 NC-CT-CAB-1000-500mm (Current Conv to NC Conn Cable)
FPR0216 Insulation Lockout Converter
FPR0407 NewCode Memory ModuleProgramming KitCAB0029 USB TO MINI USB 5 PINWEBCD Free Issue Software
0.05 - 0.5 KW Motor
Complete Motor Protection Solution to Suite :
Physical Address: 298 Soutter Street, Pretoria West Tel: +27 12 327 1729
Fax: +27 (0)12 327 1733 Toll Assist: 0860 10 30 41
www.newelec.co.za sales@newelec.co.za
AboutThe NewCode Relay is an ISO 9001:2008 compliant, three-phase motor protection relay, designed and manufactured in South Africa. It is a micro-controller based precision instrument for three-phase induction motor protection with advanced control logic features as well as multiple motor starter control circuit configurations. The relay is designed for the low voltage motor protection market. The current transformers, including the core balance current transformers are external. Certain models cater for combined current and core balance current transformers, maximum fexibility is maintained by allowing separate C.B.C.T’s with interposing current transformers with a software selectable ,1 to 10 amp secondary winding, Class 1, 5VA.
A South African Company to be Proud of
Standard KitProduct Code DescriptionFPR0650 NewCode MK2
FPR0404 NC-05-110/550 (0.5-5Amp 110-550V Direct)
BTX0004 C.B.C.T. 1100/1 MOH Steel 43mm ID
FPR0409 NC-CT-CAB-1000-500mm (Current Conv to NC Conn Cable)
FPR0216 Insulation Lockout Converter
FPR0407 NewCode Memory ModuleProgramming KitCAB0029 USB TO MINI USB 5 PINWEBCD Free Issue Software
0.25 - 2.2 KW Motor
Complete Motor Protection Solution to Suite :
Physical Address: 298 Soutter Street, Pretoria West Tel: +27 12 327 1729
Fax: +27 (0)12 327 1733 Toll Assist: 0860 10 30 41
www.newelec.co.za sales@newelec.co.za
AboutThe NewCode Relay is an ISO 9001:2008 compliant, three-phase motor protection relay, designed and manufactured in South Africa. It is a micro-controller based precision instrument for three-phase induction motor protection with advanced control logic features as well as multiple motor starter control circuit configurations. The relay is designed for the low voltage motor protection market. The current transformers, including the core balance current transformers are external. Certain models cater for combined current and core balance current transformers, maximum fexibility is maintained by allowing separate C.B.C.T’s with interposing current transformers with a software selectable ,1 to 10 amp secondary winding, Class 1, 5VA.
A South African Company to be Proud of
Standard KitProduct Code DescriptionFPR0650 NewCode MK2
FPR0405 NC-25-110/550 (0.25-25Amp 110-550V Direct)
BTX0004 C.B.C.T. 1100/1 MOH Steel 43mm ID
FPR0409 NC-CT-CAB-1000-500mm (Current Conv to NC Conn Cable)
FPR0216 Insulation Lockout Converter
FPR0407 NewCode Memory ModuleProgramming KitCAB0029 USB TO MINI USB 5 PINWEBCD Free Issue Software
0.25 - 2.2 KW Motor 1.2 - 11 KW Motor
Complete Motor Protection Solution to Suite :
Physical Address: 298 Soutter Street, Pretoria West Tel: +27 12 327 1729
Fax: +27 (0)12 327 1733 Toll Assist: 0860 10 30 41
www.newelec.co.za sales@newelec.co.za
AboutThe NewCode Relay is an ISO 9001:2008 compliant, three-phase motor protection relay, designed and manufactured in South Africa. It is a micro-controller based precision instrument for three-phase induction motor protection with advanced control logic features as well as multiple motor starter control circuit configurations. The relay is designed for the low voltage motor protection market. The current transformers, including the core balance current transformers are external. Certain models cater for combined current and core balance current transformers, maximum fexibility is maintained by allowing separate C.B.C.T’s with interposing current transformers with a software selectable ,1 to 10 amp secondary winding, Class 1, 5VA.
A South African Company to be Proud of
Standard KitProduct Code DescriptionFPR0650 NewCode MK2
FPR0406 NC-50-110/550 (5-50Amp 110-550V Direct)
BTX0004 C.B.C.T. 1100/1 MOH Steel 43mm ID
FPR0409 NC-CT-CAB-1000-500mm (Current Conv to NC Conn Cable)
FPR0216 Insulation Lockout Converter
FPR0407 NewCode Memory ModuleProgramming KitCAB0029 USB TO MINI USB 5 PINWEBCD Free Issue Software
2.5 - 22 KW Motor
Complete Motor Protection Solution to Suite :
Physical Address: 298 Soutter Street, Pretoria West Tel: +27 12 327 1729
Fax: +27 (0)12 327 1733 Toll Assist: 0860 10 30 41
www.newelec.co.za sales@newelec.co.za
AboutThe NewCode Relay is an ISO 9001:2008 compliant, three-phase motor protection relay, designed and manufactured in South Africa. It is a micro-controller based precision instrument for three-phase induction motor protection with advanced control logic features as well as multiple motor starter control circuit configurations. The relay is designed for the low voltage motor protection market. The current transformers, including the core balance current transformers are external. Certain models cater for combined current and core balance current transformers, maximum fexibility is maintained by allowing separate C.B.C.T’s with interposing current transformers with a software selectable ,1 to 10 amp secondary winding, Class 1, 5VA.
A South African Company to be Proud of
Standard KitProduct Code DescriptionFPR0650 NewCode MK2
FPR0402 NC-100-CBCT-110/550 (10-100Amp)
FPR0409 NC-CT-CAB-1000-500mm (Current Conv to NC Conn Cable)
FPR0216 Insulation Lockout Converter
FPR0407 NewCode Memory ModuleProgramming KitCAB0029 USB TO MINI USB 5 PIN WEBCD Free Issue Software
5.5 - 45 KW Motor2.5 - 22 KW Motor
Complete Motor Protection Solution to Suite :
Physical Address: 298 Soutter Street, Pretoria West Tel: +27 12 327 1729
Fax: +27 (0)12 327 1733 Toll Assist: 0860 10 30 41
www.newelec.co.za sales@newelec.co.za
AboutThe NewCode Relay is an ISO 9001:2008 compliant, three-phase motor protection relay, designed and manufactured in South Africa. It is a micro-controller based precision instrument for three-phase induction motor protection with advanced control logic features as well as multiple motor starter control circuit configurations. The relay is designed for the low voltage motor protection market. The current transformers, including the core balance current transformers are external. Certain models cater for combined current and core balance current transformers, maximum fexibility is maintained by allowing separate C.B.C.T’s with interposing current transformers with a software selectable ,1 to 10 amp secondary winding, Class 1, 5VA.
A South African Company to be Proud of
Above that use external ct's (Use full load current plus 30%)
Standard KitProduct Code DescriptionFPR0650 NewCode MK2FPR0401 NC-300-CBCT-110/550 (30-300Amp)FPR0409 NC-CT-CAB-1000-500mm (Current Conv to NC Conn Cable)FPR0216 Insulation Lockout Converter 1FPR0407 NewCode Memory ModuleProgramming KitCAB0029 USB TO MINI USB 5 PINWEBCD Free Issue Software
18.5 - 110 KW Motor
Complete Motor Protection Solution to Suite :
Physical Address: 298 Soutter Street, Pretoria West Tel: +27 12 327 1729
Fax: +27 (0)12 327 1733 Toll Assist: 0860 10 30 41
www.newelec.co.za sales@newelec.co.za
AboutThe NewCode Relay is an ISO 9001:2008 compliant, three-phase motor protection relay, designed and manufactured in South Africa. It is a micro-controller based precision instrument for three-phase induction motor protection with advanced control logic features as well as multiple motor starter control circuit configurations. The relay is designed for the low voltage motor protection market. The current transformers, including the core balance current transformers are external. Certain models cater for combined current and core balance current transformers, maximum fexibility is maintained by allowing separate C.B.C.T’s with interposing current transformers with a software selectable ,1 to 10 amp secondary winding, Class 1, 5VA.
A South African Company to be Proud of
Standard KitProduct Code DescriptionFPR0650 NewCode MK2FPR0404 NC-05-110/550 (0.5-5Amp 110-550V Converter)BTX0002 C.B.C.T. 1000/1 MOH Steel 104 mm IDCTX0013 CT 300/5 5va Class 1 MR2 36mm ID (x 3 per Relay)FPR0409 NC-CT-CAB-1000-500mm (Current Conv to NC Conn Cable)FPR0216 Insulation Lockout Converter 1FPR0407 NewCode Memory ModuleProgramming KitCAB0029 USB TO MINI USB 5 PINWEBCD Free Issue Software
132 KW Motor18.5 - 110 KW Motor
Complete Motor Protection Solution to Suite :
Physical Address: 298 Soutter Street, Pretoria West Tel: +27 12 327 1729
Fax: +27 (0)12 327 1733 Toll Assist: 0860 10 30 41
www.newelec.co.za sales@newelec.co.za
AboutThe NewCode Relay is an ISO 9001:2008 compliant, three-phase motor protection relay, designed and manufactured in South Africa. It is a micro-controller based precision instrument for three-phase induction motor protection with advanced control logic features as well as multiple motor starter control circuit configurations. The relay is designed for the low voltage motor protection market. The current transformers, including the core balance current transformers are external. Certain models cater for combined current and core balance current transformers, maximum fexibility is maintained by allowing separate C.B.C.T’s with interposing current transformers with a software selectable ,1 to 10 amp secondary winding, Class 1, 5VA.
A South African Company to be Proud of
18.5 - 150 KW Motor
Standard KitProduct Code DescriptionFPR0650 NewCode MK2FPR0404 NC-05-110/550 (0.5-5Amp 110-550V - CTMB )BTX0003 C.B.C.T. 1000/1 MOH Steel 150 mm ID CTX0051 CT 400/5 5va Class 1 MR2 36mm ID (x3 per Relay)FPR0409 NC-CT-CAB-1000-500mm (Current Conv to NC Conn Cable)FPR0216 Insulation Lockout Converter FPR0407 NewCode Memory ModuleProgramming KitCAB0029 USB TO MINI USB 5 PINWEBCD Free Issue Software
Complete Motor Protection Solution to Suite :
Physical Address: 298 Soutter Street, Pretoria West Tel: +27 12 327 1729
Fax: +27 (0)12 327 1733 Toll Assist: 0860 10 30 41
www.newelec.co.za sales@newelec.co.za
AboutThe NewCode Relay is an ISO 9001:2008 compliant, three-phase motor protection relay, designed and manufactured in South Africa. It is a micro-controller based precision instrument for three-phase induction motor protection with advanced control logic features as well as multiple motor starter control circuit configurations. The relay is designed for the low voltage motor protection market. The current transformers, including the core balance current transformers are external. Certain models cater for combined current and core balance current transformers, maximum fexibility is maintained by allowing separate C.B.C.T’s with interposing current transformers with a software selectable ,1 to 10 amp secondary winding, Class 1, 5VA.
A South African Company to be Proud of
18.5 - 150 KW Motor
Standard KitProduct Code DescriptionFPR0650 NewCode MK2FPR0404 NC-05-110/550 (0.5-5Amp 110-550V Direct) CTX0053 CT 500/5 Class 1 5VA MRII 36mm (x 3 per Relay)BTX0003 C.B.C.T. 1000/1 MOH Steel 150 mm IDFPR0409 NC-CT-CAB-1000-500mm (Current Conv to NC Conn Cable)CTX0013 CT 300/5 5va Class 1 MR2 36mm IDFPR0216 Insulation Lockout Converter FPR0407 NewCode Memory ModuleProgramming KitCAB0029 USB TO MINI USB 5 PINWEBCD Free Issue Software
22 - 200 KW Motor
Complete Motor Protection Solution to Suite :
Physical Address: 298 Soutter Street, Pretoria West Tel: +27 12 327 1729
Fax: +27 (0)12 327 1733 Toll Assist: 0860 10 30 41
www.newelec.co.za sales@newelec.co.za
AboutThe NewCode Relay is an ISO 9001:2008 compliant, three-phase motor protection relay, designed and manufactured in South Africa. It is a micro-controller based precision instrument for three-phase induction motor protection with advanced control logic features as well as multiple motor starter control circuit configurations. The relay is designed for the low voltage motor protection market. The current transformers, including the core balance current transformers are external. Certain models cater for combined current and core balance current transformers, maximum fexibility is maintained by allowing separate C.B.C.T’s with interposing current transformers with a software selectable ,1 to 10 amp secondary winding, Class 1, 5VA.
A South African Company to be Proud of
32 - 250 KW Motor
Standard KitProduct Code DescriptionFPR0650 NewCode MK2FPR0404 NC-05-110/550 (0.5-5Amp 110-550V - CTMB)CTX0052 CT 600/5 5VA CLASS 1 MR2 36mm ID BTX0003 C.B.C.T. 1000/1 MOH Steel 150 mm IDFPR0409 NC-CT-CAB-1000-500mm (Current Conv to NC Conn Cable)CTX0013 CT 300/5 5va Class 1 MR2 36mm IDFPR0216 Insulation Lockout Converter FPR0407 NewCode Memory ModuleProgramming KitCAB0029 USB TO MINI USB 5 PINWEBCD Free Issue Software
Physical Address: 298 Soutter Street, Pretoria West Tel: +27 12 327 1729
Fax: +27 (0)12 327 1733 Toll Assist: 0860 10 30 41
www.newelec.co.za sales@newelec.co.za
AboutThe NewCode Relay is an ISO 9001:2008 compliant, three-phase motor protection relay, designed and manufactured in South Africa. It is a micro-controller based precision instrument for three-phase induction motor protection with advanced control logic features as well as multiple motor starter control circuit configurations. The relay is designed for the low voltage motor protection market. The current transformers, including the core balance current transformers are external. Certain models cater for combined current and core balance current transformers, maximum fexibility is maintained by allowing separate C.B.C.T’s with interposing current transformers with a software selectable ,1 to 10 amp secondary winding, Class 1, 5VA.
A South African Company to be Proud of
32 - 250 KW Motor
NewCode MK2 Relay
NewCode CTMB 100, 300 AMP
NewCode CTMB 1, 5, 25, 50 AMP
NewCode Memory Module
Physical Address: 298 Soutter Street, Pretoria West Tel: +27 12 327 1729
Fax: +27 (0)12 327 1733 Toll Assist: 0860 10 30 41
www.newelec.co.za sales@newelec.co.za
AboutThe NewCode Relay is an ISO 9001:2008 compliant, three-phase motor protection relay, designed and manufactured in South Africa. It is a micro-controller based precision instrument for three-phase induction motor protection with advanced control logic features as well as multiple motor starter control circuit configurations. The relay is designed for the low voltage motor protection market. The current transformers, including the core balance current transformers are external. Certain models cater for combined current and core balance current transformers, maximum fexibility is maintained by allowing separate C.B.C.T’s with interposing current transformers with a software selectable ,1 to 10 amp secondary winding, Class 1, 5VA.
A South African Company to be Proud of
NewCodeCBCT 43mm ID
NewCode CBCT 104mm ID
NewCode CT 36mm
NewCodeCBCT 150mm ID
Physical Address: 298 Soutter Street, Pretoria West Tel: +27 12 327 1729
Fax: +27 (0)12 327 1733 Toll Assist: 0860 10 30 41
www.newelec.co.za sales@newelec.co.za
AboutThe NewCode Relay is an ISO 9001:2008 compliant, three-phase motor protection relay, designed and manufactured in South Africa. It is a micro-controller based precision instrument for three-phase induction motor protection with advanced control logic features as well as multiple motor starter control circuit configurations. The relay is designed for the low voltage motor protection market. The current transformers, including the core balance current transformers are external. Certain models cater for combined current and core balance current transformers, maximum fexibility is maintained by allowing separate C.B.C.T’s with interposing current transformers with a software selectable ,1 to 10 amp secondary winding, Class 1, 5VA.
A South African Company to be Proud of
NewCode Motor Protection Relay to
CTMB Connector Cable
USB to Mini USB CableInsulation Lockout
Converter
NewElec Software Disc
Innovative solutions from South Africa’s Leading Motor Protection Specialists
Version 2014/04
Physical Address:
298 Soutter Street,
Pretoria West
Tel: +27 12 327 1729
Fax: +27 (0)12 327 1733
Toll Assist: 0860 10 30 41
www.newelec.co.za
sales@newelec.co.za
The NewCode relay is fully configurable with the aid of frontend software or a man machine interface unit (MMI). Event records can also be downloaded with the aid of the laptop for further analysis. All the settings can be password protected. The relay has an onboard database where time and date stamped records are kept. Two types of records are kept namely fault records (35 last faults) and event records (1400 events). In the case of event records, the user has limited access rights (read only). The front-end also has a data recorder and a spectrum analyser which could be used to analyse motor performance and supplied power quality respectively. The spectrum analyser can detect harmonics up to the 9th harmonic on any of the three phase currents. The relay detects earth leakage currents with the aid of the external core balance current transformer and is configurable to operate in inverse definite minimum time (IDMT) or instantaneous definite time (IDT) mode. A unique feature is added to the relay in the form of simulation. This function could be used for personnel training or relay functionality testing.