Post on 30-Jul-2021
transcript
STOCKMEIER Chemie Products for the Hot Dip Galvanizing Industry
2
STOCKMEIER Chemie | Products for the Hot Dip Galvanizing Industry
We stand for strong connections
Family business
100% family-owned since it was founded in 1920
1,800 employees worldwide
Over 50 locations worldwide
Head office in Bielefeld
about 26,000 products
> 2 million tons sales per year
Certifications ISO 9001:2015ESAD IIResponsible Care
Member of Supporting member of
3
STOCKMEIER Chemie | Products for the Hot Dip Galvanizing Industry
The pre-treatment in a Hot Dip Galva-nizing plant plays a decisive role in the quality of the galvanized surfaces.Continuous improvement is always – also in terms of competition – in the focus of the galvanizer.
The application engineers of STOCKMEIER Chemie therefore always look at the complete process and work out overall concepts together with you in which profitability, efficiency, sus-tainability and environmental friendliness have always the highest priority.
On the following pages you will find an extract from our delivery programme for the Hot Dip Galvanizing Industry.
In addition to innovative and classic degreasing agents, it includes many additives that have been specially developed for pre-treatment in Hot Dip Galvanizing plants.
Fluxes and post-treatment products are also part of our large portfolio.
Convince yourself of our specialised offer and let us advise you personally.
For more than 40 years, the Surface Technology Department has been involved in the field of Hot Dip Galvanizing and has continuously de-veloped the numerous products and processes available for pre- and post-treatment. Our own research and development department has brought many innovative and exclusive products onto the market in recent years. Many of these developments were realised together with customers.
STOCKMEIER – We stand for strong connections
Your advantages:
Reliable partnerHigh product qualityWide spectrum of efficacyEasy handlingLong (partly infinite) bath lifetimeEconomical and environmentally friendlyOn-site application engineering consultingOwn productionSpecialised research / development departmentService laboratory / technician
Hot Dip GalvanizingHolistic solutions
From the practice for the practice
Support in the analysis and optimisation of processes is our passion.
We are LIVE ON SITE!
Request us!
4
Among the degreasers briefly present-ed below you will find many innovative cleaning agents in addition to the classic products (e.g. powdery, alka-line degreasers or pickling degreas-ers).
In the case of the new alkaline products, in ad-dition to cost-effectiveness, particular attention was paid to occupational safety (liquid products,
low temperature) and environmental protection (low energy consumption, long service life).
The new development Leraclen® PF 10.1 impress-es with its almost infinite service life, which can be achieved with this product without the use of phosphates.
Innovative products – developed with you and for you
Degreasing
Alkaline degreasersProduct application / characteristics
Leraclen® 122 SAE Degreaser with extremely good cleaning performance, silicate-free, emulsifying, foam-regulated, powder
Leraclen® ATR Degreaser with extremely good cleaning performance, free of phosphates, sulphates and silicates, strongly emulsifying, surfactant containing high concentrate, liquid
Lerabilt® 268 Builder for the preparation of alkaline low-temperature degreasers in combination with special surfactants; extremely good cleaning performance, silicate-free, phosphate-free, liquid
Acid degreasersProduct application / characteristics
Leraclen® 1231 Degreaser based on phosphoric acid with very good cleaning performance and infinite service life, liquid
Leraclen® PF 10.1 Degreaser based on mineral acid with very good cleaning performance, self-regenerating, phosphate-free, liquid
Pickling degreaserProduct application / characteristics
Leratens® 1019 Pickling degreaser with extremely good cleaning performance, also stable at high iron concentrations, inhibiting effect
STOCKMEIER Chemie | Degreasing
Our pickling additives are highly specialised products such as defoamers, pickling vapour reducers or inhibitors.
Some of them have only been approved by an independent party specifically for your area of application after thorough testing.
Pickling additives
Additives for pickling (multifunctional products)Product application / characteristics
Leratens® AV PlusProducts to reduce pickling vapour and mists, to decrease floating substances and for reduction of acid consumption, inhibiting effect
Leratens® AV Ultra
Additives for pickling and stripping to prevent excessive iron removalProduct application / characteristics
Lerapas® 1018 Inhibitor to reduce iron removal and acid consumption
Lerapas® BP Inhibitor to reduce iron removal and acid consumption, also suitable for high strength materials (DSV/GAV listed)
Additives to prevent excessive foamProduct application / characteristics
Lerapur® FS 60 Defoamer, water soluble, for zinc stripping
STOCKMEIER Chemie | Pickling additives
Pickling without additiv Pickling with Leratens® AV
5
STOCKMEIER Chemie | Fluxes / -additives
6
Product application / characteristics
Lerapas® Flux 60 (fl. 800 g/l) pH+ Flux (60:40), liquid, to increase the pH value
Lerapas® Flux 80 (fl. 800 g/l) pH+ Flux (80:20), liquid, to increase the zinc chloride content and to stabilise the pH value
Lerapur® SDK 60 Defoamer, water soluble, for flux treatment plants
Leratens® Flux Additiv FF Wetting agent to reduce surface tension, foam-free, better wetting, less carry-over
In the field of fluxes we can also offer holistic solutions based on our experience. We have concentrated on special products which should help you to achieve the best possible conditions in your flux bath. In this context, we pay parti-cular attention to maintaining the pH value and the stability of the zinc chloride to ammonium chloride ratio. The addition of small amounts of
additive to reduce surface tension has a lot of positive effects on the flux bath and the subse-quent galvanizing process.
In addition, our portfolio also includes standard fluxes (powder/liquid – on request).
Fluxes / -additives
Flux additive: Wetting Flux additive: Drying
0,1 % 0,3 % 0 % 0,1 % 0,3 % 0,5 %0,5 %0 %
STOCKMEIER Chemie | Post-treatment
7
After you have applied your perfect zinc layer, it is important to protect it. Whether you need to preserve the gloss for weeks or protect the zinc coating for months, together with you we will find the best solution.
In particular, the environmentally friendly Lerapas® ZN 14 offers an innovative solution to preserve the glossy surfaces.
Post-treatment
Product application / characteristics
Lerapas® ZN 14 Gloss retention, free of chromium and other heavy metals, halogen- and polymer-free
Lerapas® M Post-dip solution, chromium-free, water-soluble dip paint for hot galvanized parts; no cooling necessary
Lerapas® HPC3 Passivation based on chromium (III), free of cobalt and chromium (VI) compounds, wide temperature range (material temperature)
Product application / characteristics
Leraclen® ZNR Product to remove impurities or reaction products- such as white rust, red rust or acid stains - from galvanized surfaces
We can also remedy minor blemishes with our zinc cleaner.
ZnCynkownia Sp. z o.o.65,38
30 419,53Zn Cynkownia Sp. z o.o.ul. Łużycka 144-300 Wodzisław ŚląskiNIP: 647 257 47 05REGON: 364797189www.zncynkownia.pl
ZnCynkownia Sp. z o.o.65,38
30 419,53Zn Cynkownia Sp. z o.o.ul. Łużycka 144-300 Wodzisław ŚląskiNIP: 647 257 47 05REGON: 364797189www.zncynkownia.pl
����������������
�����������
�������������������
References
STOCKMEIER Chemie | References
8
ZnCynkownia Sp. z o.o.65,38
30 419,53Zn Cynkownia Sp. z o.o.ul. Łużycka 144-300 Wodzisław ŚląskiNIP: 647 257 47 05REGON: 364797189www.zncynkownia.pl
ZnCynkownia Sp. z o.o.65,38
30 419,53Zn Cynkownia Sp. z o.o.ul. Łużycka 144-300 Wodzisław ŚląskiNIP: 647 257 47 05REGON: 364797189www.zncynkownia.pl
����������������
�����������
�������������������
STOCKMEIER Chemie | Research & Development / Service laboratory
9
The highly qualified and experienced application engineers of STOCKMEIER Chemie are supported by
Own research and development department, which is specialised in the further development of pre- and post-treatment products An excellently equipped service laboratory for the analysis of bath samples, especially from the Hot Dip Galvanizing sector Specialised service technicians to support customers on site
Research & Development / Service laboratory
Request us, whether with the development of products for your special application or with the joint creation of holistic concepts.
We are also happy to analyse your standard bath samples or help with the installation of dosing technology.
10
STOCKMEIER Gruppe | Applications of surface technology
Benefit from the extensive product portfolio of STOCKMEIER Chemie
Wastewater ChemistryActivated carbonAdBlueAcids, alkalis, basic chemicalsMaintenance cleaner
9
We are happy to offer you individual solutions and provide you with fast and comprehensive advice.
All current delivery programmes are also available for download on the Internet: www.stockmeier.com
Customers in these industries are convinced by STOCKMEIER:
Surface finishing Hot Dip Galvanizing Electroplating Enamelling worksAutomotive industry / suppliersScrew industry / fastening elementsTool manufacturingHardening shopsRolling millsMechanical engineeringIndustrial cleaning serviceMaintenance / repair shopsSLC cleaning
Con
cept
and
des
ign:
Vog
elsä
nger
Stu
dios
| E
N 0
5/2
021
STOCKMEIER Chemie GmbH & Co. KG
Am Stadtholz 3733609 Bielefeld GermanyFon +49 521 / 3037 - 325Fax +49 521 / 3037 - 27325
hdg@stockmeier.comwww.stockmeier.com