Post on 30-May-2020
transcript
O N E P A S S C U L T I V A T O RO N E P A S S C U L T I V A T O R
WEAVING MACHINERY
WEAVING MACHINERY
SUBDISC IIWEAVINGWEAVING
Specification
Working Width: 3M 3.5M
Transport Width: 3M 3.5M
Legs: 7 9
HP Requirement: 150 180
Description:Designed, developed and manufactured by ourselves at our Evesham base. This one pass cultivatorhas two rows of low draft legs with cast steel knock on points, which break through the pan, lifting andaerating the soil without bringing subsoil to the surface with a working depth of 10-40 cm. The largescalloped discs have sealed for life bearings and are individually mounted with torsion bar suspension,chopping, mixing and levelling trash and soil together. Finally the Guttler packer roller firms the finishedtilth perfectly and works in very wet conditions. All adjustments are spannerless, the legs, discs & rollercan all be adjusted in seconds. The side boards are mounted within the machine’s frame reducing theoverall transport width and flare out when in work. The Subdisc II also comes complete with parkingjacks, LED lights and an aluminium toolbox. Simple, proven, robust elements that lifts, chops, mixesand presses, with low HP requirement and running costs.
Standard Spec:
● 2 rows of legs with knock on points
● 1 row of large diameter scalloped discs
● Guttler packer roller
Specification
Working Width: 3M 3.5M
Transport Width: 3M 3.5M
Legs: 7 9
HP Requirement: 150 180
Description:Designed, developed and manufactured by ourselves at our Evesham base. This one pass cultivatorhas two rows of low draft legs with cast steel knock on points, which break through the pan, lifting andaerating the soil without bringing subsoil to the surface with a working depth of 10-40 cm. The largescalloped discs have sealed for life bearings and are individually mounted with torsion bar suspension,chopping, mixing and levelling trash and soil together. Finally the Guttler packer roller firms the finishedtilth perfectly and works in very wet conditions. All adjustments are spannerless, the legs, discs & rollercan all be adjusted in seconds. The side boards are mounted within the machine’s frame reducing theoverall transport width and flare out when in work. The Subdisc II also comes complete with parkingjacks, LED lights and an aluminium toolbox. Simple, proven, robust elements that lifts, chops, mixesand presses, with low HP requirement and running costs.
Standard Spec:
● 2 rows of legs with knock on points
● 1 row of large diameter scalloped discs
● Guttler packer roller
E F Weaving Ltd.Chadbury, EveshamWorcestershireWR11 4TX
Tel: (+44) 01386 49155Fax: (+44) 01386 49156Web: www.weavingmachinery.netE-mail: info@weavingmachinery.net
Shakaerator Shin
Shakaerator Point
Shakaerator Wide Point
Disc Assembly
● One Pass Cultivator
● Lifts, Chops, Mixes & Presses
● Low HP Requirement
● Low Running Costs
● Working Depth of 10 – 40 cm
*Ask about user testimonials
Full length swinging side boardLED Road lights, parking jacks & aluminium tool boxSimple & easy spannerless adjustments OSR Crop drilled with the Subdisc II & double disc openersScalloped discs with sealed for life bearing hubs
SUBDISC IIWEAVINGWEAVING