Suncor Application Packaging Install Instructions_Pro II v 9.1 With Electrolyte & OLI

transcript

Application Packaging Install Instructions

Install Instructions Created By: Saurabh GhateDate: 03/01/2013Current Application Environment (Suncor/Petro-Canada): Pro II V 9.1 with Electrolyte & OLI

Business Unit: OilsandsBusiness Representative: Isaac Oje,Application Vendor: SIMSCIApplication Name: Pro II V 9.1 with Electrolyte & OLIApplication Version: V 9.1 Application Language (English/French): EnglishMedia Location: \\file001\App_Lib\DML\Simsci\ProII V9.1 with Electrolyte & OLI\

MediaDocumentation Location: \\file001\App_Lib\DML\Simsci\ProII V9.1 with Electrolyte

& OLI\DocumentationDALM Record #:ITASM Record #:

Application Platform (WinXP/Citrix/Win7): WinXpApplication Packaging Method (App-V /Wise):Note: App-V is default packaging method unless app can’t be virtualized or must go FAT.

Section 1: Application Pre-Installation Requirements / NotesUse the box below to identify any application pre-requisites (provide pre-req name and version) and to describe any pre-installation steps such as database or file share access, server access and or license keys. Then describe any workarounds that were needed if any.

Version 1.3

Section 2: Application Installation Steps

Use the box below to record application specific step by step installation and configuration instructions on a Suncor workstation including ALL screen shots of each step. Define Application Program Group & Shortcuts required.

Go to the below path

\\file001\App_Lib\DML\Simsci\ProII V9.1 with Electrolyte & OLI\Media

1) Run Setup.exe

Version 1.3

2. click in “Install”

3. select “I accept ‘ and click on next

Version 1.3

4. keep the default folder location and click on “Next”

Version 1.3

5. Select “custom setting ” and click on next

Version 1.3

6. Select ALL the options except Nis REFROP and click on “Next”

Version 1.3

7. Select FLEXnet 11 Type 27000@LICPRDCGY002 in License server name and click on “NEXT”

Version 1.3

8.Select “create shortcut on desktop” and click on” Next”

Version 1.3

9. Click in “INSTALL”

10. Click on “Next”

Version 1.3

11. Select on “I accept ” and click on “Next”

Version 1.3

12. Type “Suncor energy services Inc” in Name and Organization Put the below key in serial no section

V2-0R@7-HRVS-UQ1E-SJPP-15RY-@N43

Click on “Next”

Version 1.3

13. Select “Manual” option and Type LICPRDCGY003 In ip address / Host name section Then click on “Next”

Version 1.3

14. Select “Custom” option Then click on “Next”

Version 1.3

15. Select all the available options click on “Next”

Version 1.3

16. Click on “Install”

Version 1.3

17. Then click on “Finish”

Version 1.3

18. Then click on “Finish”

Version 1.3

19. Then click on “Yes” to restart machine

Section 4: Application Verification/Test InstructionsUse the box below to provide screen shots of the application verification steps that were taken to ensure the application installed successfully include screen shots (i.e. Test plan).

Version 1.3

Application Verification/Test InstructionsApplication can be found in below path

Start – All program – SMISCI-PRO II9.1 – PRO II9.1

PRO II 9.1 will open like below Start – All program –OLI System –OLI engine in PROII 9.x-Chemestry wizard 3.1

Version 1.3

For OLI & electrolyte Add on

Version 1.3

Suncor Application Packaging Install Instructions_Pro II v 9.1 With Electrolyte & OLI

Documents