Post on 04-Jul-2018
transcript
Sunstone Engineering2014 Product Catalog
2014 Product Catalog
2
Table of Contents
SunstoneEngineering.com2
Confidential
Single Pulse Capacitive Discharge (CD) Welders ________________3
Dynamic CD Welders ______________________________________3
Linear DC Welder _________________________________________3
Dual Pulse Capacitive Discharge (CD) Welders __________________4
AC Welders _____________________________________________6
Orion Pulse Arc Welders ___________________________________7
Weld Heads _____________________________________________11
Micro Weld Heads ________________________________________13
Battery Welding Materials __________________________________14
Hand Held Welding Attachments ____________________________15
Electrodes ______________________________________________19
Accessories _____________________________________________20
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
3 SunstoneEngineering.com3
SPM
SINGLE PULSE CAPACITIVE WELDERSProduct line for Research and Light Production with MCU and Thermal Protection
CD100SPM 100ws Single Pulse Research and 19 8 Light Production Resistance Welder
CD200SPM 200ws Single Pulse Research and 21 9 Light Production Resistance Welder Features: • Adjustable down to 0.1ws • Switching Power Supply (110–220 VAC) • Simple, User-Friendly Interface • Up to 120 welds/minute • Foot Switch
Upgrades:
• Energy Precision with lowered maximum output
DYNAMIC-CD WELDERSDual Pulse Resistance Welder with CD and DC Waveforms
D-CD320 320ws Dual Pulse CD / DC 37 20 Spot Welder Features: • 320ws Dual Pulse CD Welder • CD adjustable from 0.5ws to 320ws • DC adjustable from 1.5V to 12V • CD up to 244 welds/min • DC duty cycle - 50% • Switching Power Supply (110–220 VAC) • Simple, User-Friendly Interface • Foot Switch
Upgrades:
• Multi Pulse 5 phase • Roll Spot
LINEAR-DC WELDERLinear DC precision with HF inverter power
LDC Basic 2500amp Linear DC 21 9 LDC Advanced 2500amp Linear DC 21 9 Features: • 10-2500A weld current • High precision linear DC welder • 8% Duty Cycle • Plugs into 110 or 240 • 10” Capacitive Touch screen Interface • Geared for Automation • Graphical feedback display of weld waveform and energy
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
4 SunstoneEngineering.com4
CD-DP
DUAL PULSE CAPACITIVE DISCHARGE WELDERSIndustrial product line with MCU and Thermal Protection
CD200DP 200ws Microprocessor Industrial CD 30 13 Spot Welder with Dual Pulse and Thermal Protection
Features: • 200ws Dual Pulse CD Welder • Single or Dual Pulse Operation • Switching Power Supply (110–220 VAC) • Simple, User-Friendly Interface • Peak Repetition Rates up to 600 Welds/Min with Thermal Protection • Foot Switch
CD400DP 400ws Microprocessor Industrial CD 34 15 Spot Welder with Dual Pulse and Thermal Protection Features: • 400ws Dual Pulse CD Welder • Single or Dual Pulse Operation • Switching Power Supply (110–220 VAC) • Simple, User-Friendly Interface • Peak Repetition Rates up to 240 Welds/Min with Thermal Protection • Foot Switch
CD600DP 600ws Microprocessor Industrial CD 37 20 Spot Welder with Dual Pulse and Thermal Protection Features: • 600ws Dual Pulse CD Welder • Single or Dual Pulse Operation • Switching Power Supply (110–220 VAC) • Simple, User-Friendly Interface • Peak Repetition Rates up to 140 Welds/Min with Thermal Protection • Foot Switch
CD200-600DP Upgrades • Fine resolution software upgrade available to adjust power in smaller steps • Roll Spot mode • Key lock out • Handle
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
5 SunstoneEngineering.com5
CD-DP
CD1000DP 1,000ws Microprocessor Industrial 60 28 CD Spot Welder with Dual Pulse and Thermal Protection Features: • 1000ws Dual Pulse CD Welder • Single or Dual Pulse Operation • Switching Power Supply (110–220 VAC) • Simple, User-Friendly Interface • Peak Repetition Rates up to 120 Welds/Min with Thermal Protection • Foot Switch
CD1000DP Upgrades • Upgrade to 1100ws • Roll Spot • Key lock out
CD1100DP 1,100ws Microprocessor Industrial 60 28 CD Spot Welder with Dual Pulse and Thermal Protection Features: • 1000ws Dual Pulse CD Welder • Single or Dual Pulse Operation • Switching Power Supply (110–220 VAC) • Simple, User-Friendly Interface • Peak Repetition Rates up to 120 Welds/Min with Thermal Protection • Foot Switch
CD1000DP Upgrades • Upgrade to 1100ws • Roll Spot • Key lock out
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
6 SunstoneEngineering.com6
AC
AC1015 1.5 kVA 110 VAC Single Phase 31 14 Resistance Welder (720 amps) Features: • Internal AC Transformer • Simple, User-Friendly Interface • 4 Line Character Display • Foot Pedal Features: • Dual Pulse, Multi-pulse, & Seam Rollspot • Save up to 100 Programmable Schedules • Make up to 10 Jobs (a chain of schedules)
AC1025 2.5 kVA 220 VAC Single Phase 32 15 Resistance Welder (1200 amps) Features: • Internal AC Transformer • Improved Duty Cycle • Simple, User-Friendly Interface • 4 Line Character Display • Foot Pedal Functions: • Dual Pulse, Multi-pulse, & Seam Rollspot • Save up to 100 Programmable Schedules • Make up to 10 Jobs (a chain of schedules)
AC WELDERSSingle Phase Resistance Welder with Internal Transformer
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
7 SunstoneEngineering.com7
Pulse Arc
Pulse 250i EV Orion Pulse 250i EV Battery Welder 75 35 Features: • 0.1 to 250 Joules of power • Large 9-inch touch screen display • Pulse-Arc and Resistance Technology • High Frequency Agitation • Adaptive Weld Ignition • Rapid Fire Pulsing
Pulse 250i Orion Pulse 250i 50 23 Features: • 0.1 to 250 Joules of power • Large 9-inch touch screen display • Pulse-Arc and Resistance Technology • High Frequency Agitation • Adaptive Weld Ignition • Rapid Fire Pulsing • Space-Saving Microscope with Optical Shutter, LED Lights, and 5x / 10x Magnification
Pulse 200i Orion Pulse 200i 50 23 Features: • 0.1 to 200 Joules of power • Large 9-inch touch screen display • Pulse-Arc and Resistance Technology • High Frequency Agitation • Adaptive Weld Ignition • Rapid Fire Pulsing • Space-Saving Microscope with Optical Shutter, LED Lights, and 5x / 10x Magnification
Pulse 150i Orion Pulse 150i 50 23 Features: • 0.1 to 150 Joules of power • Large 9-inch touch screen display • Pulse-Arc and Resistance Technology • High Frequency Agitation • Adaptive Weld Ignition • Rapid Fire Pulsing • Space-Saving Microscope with Optical Shutter, LED Lights, and 5x / 10x Magnification
ORION PULSE-ARC WELDERSPulse-Arc (Micro-TIG) Industrial and Laboratory Welders
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
8 SunstoneEngineering.com8
Pulse Arc
Orion 250s Orion 250s with Microscope 41 21 Features: • 2 to 250 Joules of power • Precision increments • Large touch screen display • 3-in-1 capabilities • Stereo Microscope with Optical Shutter, Light, and 5x / 10x Magnification
Orion 250s Plus Orion 250s with Arm 43 22 Features: • 2 to 250 Joules of power • Agitation and Ignition • Tack Welding • Large touch screen display • 3-in-1 capabilities • Stereo Microscope on retractable arm with Optical
Shutter, Light, and 5x / 10x Magnification
Orion 250s Basic Orion 250s without Microscope 26 12 Features: • All items listed under Orion 250s with the exception of the Stereo Microscope with Optical Shutter • Stereo Microscope replaced with an Auto-Darkening Lens (ADLENS)
Orion ARM Orion Microscope Arm Upgrade 17 8 Features: • Stereo Microscope on retractable arm with Optical
Shutter, Light, and 5x / 10x Magnification
AGR Argon Gas Regulator 3 1.5 • For use with Orion Pulse Arc Welders
ADLENS Auto Darkening Lens 3 1.5 • For use with Orion Pulse Arc Welders
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
9 SunstoneEngineering.com9
Pulse Arc
Orion 150s Orion 150s with Microscope 41 21 Features: • 2 to 150 Joules of power • Precision increments • Large touch screen display • 3-in-1 capabilities • Stereo Microscope with Optical Shutter, Light, and 5x / 10x Magnification
Orion 150s Plus Orion 150s with Arm 43 22 Features: • 2 to 150 Joules of power • Agitation and Ignition • Tack Welding • Large touch screen display • 3-in-1 capabilities • Stereo Microscope on retractable arm with Optical
Shutter, Light, and 5x / 10x Magnification
Orion 150s Basic Orion 150s without Microscope 26 12 Features: • All items listed under Orion 150s with the exception of the Stereo Microscope with Optical Shutter • Stereo Microscope replaced with an Auto-Darkening Lens (ADLENS)
Orion ARM Orion Microscope Arm Upgrade 17 8 Features: • Stereo Microscope on retractable arm with Optical
Shutter, Light, and 5x / 10x Magnification
AGR Argon Gas Regulator 3 1.5 • For use with Orion Pulse Arc Welders
ADLENS Auto Darkening Lens 3 1.5 • For use with Orion Pulse Arc Welders
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
10 SunstoneEngineering.com10
Pulse Arc
Orion 100c Orion 100c with Microscope 27 12 Features: • Agitation and Ignition • User friendly touch screen interface • 3-100ws (joules) • Precision and Repeatability • Stereo Microscope with Optical Shutter, Light, and 5x / 10x Magnification
Orion 100c Plus Orion 100c with Arm 29 13 Features: • Agitation and Ignition • User friendly touch screen interface • 3-100ws (joules) • Precision and Repeatability • Stereo Microscope on retractable arm with Optical Shutter, Light, and 5x / 10x Magnification
Orion 100c Basic Orion 100c without Microscope 12 5.5 Features: • All items listed under Orion 100c with the exception of the Stereo Microscope with Optical Shutter • Stereo Microscope replaced with an Auto-Darkening Lens (ADLENS)
Orion ARM Orion Arm Upgrade 17 8 Features: • Stereo Microscope on retractable arm with Optical
Shutter, Light, and 5x / 10x Magnification
ARG Argon Gas Regulator 3 1.5 • For use with Orion Pulse Arc Welders
ADLENS Auto Darkening Lens 3 1.5 • For use with Orion Pulse Arc Welders
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
11 SunstoneEngineering.com11
WH1 Weld heads
WH1125M WH1125M Opposed Weld Head 23 10 Opposed Production-Ready Features: • Mechanical (Manual foot pedal) • Micro-switch and cable • Weld head to welder cables (1 AWG)
• Glidcop copper electrodes
WH1125A WH1125A Opposed Weld Head 23 10 Opposed Production-Ready Features: • Pneumatic (Air-actuation) • Micro-switch and cable • Weld head to welder cables (1 AWG) • Glidcop copper electrodes
WH1250M WH1250M Opposed Weld Head 23 10 Opposed Production-Ready Features: • Mechanical (Manual foot pedal) • Micro-switch and cable • Weld head to welder cables (1 AWG) • Glidcop copper electrodes • Accepts ¼” electrodes
WH1250A WH1250A Opposed Weld Head 23 10 Opposed Production-Ready Features: • Pneumatic (Air-actuation) • Micro-switch and cable • Weld head to welder cables (1 AWG) • Glidcop copper electrodes • Accepts ¼” electrodes
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
12 SunstoneEngineering.com12
WH2 Weld Heads
WH2125M WH2125M Series (Parallel Gap) 23 10 Parallel Weld Head Features: • Mechanical (Manual foot pedal) • Micro-switch and cable • Weld head to welder cables (1 AWG) • Glidcop copper electrodes
• Ideal for Battery Manufacturing
WH2125A WH2125A Series (Parallel Gap) 23 10 Parallel Weld Head Features: • Pneumatic (Air-actuation) • Micro-switch and cable • Weld head to welder cables (1 AWG) • Glidcop copper electrodes • Ideal for Battery Manufacturing
WH2250M WH2250M Series (Parallel Gap) 23 10 Parallel Weld Head Features: • Mechanical (Manual foot pedal) • Micro-switch and cable • Weld head to welder cables (1 AWG) • Glidcop copper electrodes • Accepts ¼” electrodes
WH2250A WH2250A Series (Parallel Gap) 23 10 Parallel Weld Head Features: • Pneumatic (Air-actuation) • Micro-switch and cable • Weld head to welder cables (1 AWG) • Glidcop copper electrodes • Accepts ¼” electrodes
WHBPA Weld Head Base Plate for 3 1.5 Air-Actuated Weld Head Dimensions: • L8” x W8” x H0.25”
WELD HEADSParallel and Opposed Weld Heads - Available in Pneumatic or Mechanical Models
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
13 SunstoneEngineering.com13
MWH Opposed
MWH2000A MWH2000A Digital Light Force 45 20 Opposed Micro Weld Head Features: • Pneumatic (Air-actuation) • Digital Force Display for Accurate and Repeatable Welds • Digital Force Adjustments • Fine Control of Weld Pressure From 350 to 2,000 grams • Precision and Repeatability • High Accuracy - Within +/- 15 grams for Light-Force Applications • Self-Calibration System • No Force Deflection • Digital Save Settings - Store and Recall up to 10 Force Settings • Weld head to welder cables (8 AWG) • Micro-switch and cable • MWH Electrodes Included
- Specify when ordering
MWH2000A MWH2000A Digital Light Force 45 20 Parallel Micro Weld Head Features: • Pneumatic (Air-actuation) • Digital Force Display for Accurate and Repeatable Welds • Digital Force Adjustments • Fine Control of Weld Pressure From 350 to 2,000 grams • Precision and Repeatability • High Accuracy - Within +/- 15 grams for Light-Force Applications • Self-Calibration System • No Force Deflection • Digital Save Settings - Store and Recall up to 10 Force Settings • Weld head to welder cables (8 AWG) • Micro-switch and cable • MWH Electrodes Included - Specify when ordering
OR
OR
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
14 SunstoneEngineering.com14
Battery Welding Materials
SC375N15 0.375”w x 0.015”t x 25’L Spooled Copper Strip Call for Pricing
SN375N54 0.375”w x 0.005”t x 25’L Spooled Nickel Strip
SN250N54 0.25”w x 0.005”t x 25’L Spooled Nickel Strip
SN125N54 0.125”w x 0.005”t x 25’L Spooled Nickel Strip
SN125N34 0.125”w x 0.003”t x 25’L Spooled Nickel Strip
SNSSP Spooled Sample Pack One 10 ft Spool of Each Material Listed Above
SN0625N34 0.0625”w x 0.005”t x 25’L Spooled Nickel Strip additional widths and thicknesses available
SN375N54_1.25L 0.375”w x 0.005”t x 1.125”L Pre-Cut Nickel Strip 250pc
SN250N54_1.25L 0.25”w x 0.005”t x 1.125”L Pre-Cut Nickel Strip 250pc
SN125N54_0.75L 0.125”w x 0.005”t x 0.75”L Pre-Cut Nickel Strip 250pc
SN125N34_0.80L 0.125”w x 0.003”t x 0.80”L Pre-Cut Nickel Strip 250pc
SNPSP Pre-Cut Sample Pack 100pc of Each Pre-Cut Material Listed Above
SN50N54_1.125L 0.5”w x 0.005”t x 1.125”L Pre-Cut Nickel Strip 250pc additional widths and thicknesses available
9” x 12” Adhesive Fish Paper Sheets for Battery Pack Insulation (10 sheet pack) die cut fish paper also available
Full Line PVC Shrink Wrap Tubing Call for Pricing • Sizes Range from 14mm to 300mm • Wall Thicknesses Include 4 mil, 6 mil, and 8 mil • Standard Colors are Black, Blue, White, and Clear
PRE-CUT TABS
NICKEL STRIP - SPOOLED
COPPER STRIP - SPOOLED
FISH PAPER
SHRINK WRAP
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
15 SunstoneEngineering.com15
Pressure Activated Single Probe Hand Pieces
PASP HP CP Pressure-Activated Single Probe 4 2 Hand Piece Clip Features: • Pressure-actuated for repeatability • Adjustable pressure set-point • For hard-to-reach welds • 1/8” RWMA II Electrode • Large alligator clip for simple setup • 4 AWG cabling standard
PASP HP MAG Pressure-Activated Single Probe 4 2 Hand Piece Magnetic Features: • Pressure-actuated for repeatability • Adjustable pressure set-point • For hard-to-reach welds • 1/8” RWMA II Electrode • Large magnetic clip for simple setup (iron base material) • 4 AWG cabling standard
PASP HP RS Pressure-Activated Single Probe 4 2 Hand Piece Roll Spot Features: • Pressure-actuated for repeatability • Adjustable pressure set-point • 2” copper wheel (EL-ROLL) • Large alligator clip for simple setup • 4 AWG cabling standard
PGHP Wheel Single Probe Hand Piece 1 0.5 Features: • 3/8” diameter brass shank • 1 AWG cabling
PGHP SP Single Probe Hand Piece 1 0.5 Features: • 3/8” • 1 AWG cabling
HAND-HELD WELDING ATTACHMENTS
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
16 SunstoneEngineering.com16
Single Probe Hand Pieces
SPHP Single Probe Hand Piece 1 0.5 Features: • 1/4” diameter RWMA II shank • 8 AWG cabling
SPHP LP Single Probe Hand Piece 1 0.5 Features: • 1/4” diameter brass shank • 8 AWG cabling • Accepts 1/16” diameter electrode
SPHP MP Single Probe Hand Piece 1 0.5 Features: • 5/8” diameter brass shank • 4 AWG cabling • Accepts 1/8” diameter electrode
SPHP HP Single Probe Hand Piece 1 0.5 Features: • 7/8” diameter brass shank • 1 AWG cabling • Accepts 3/16” diameter electrode
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
17 SunstoneEngineering.com17
Dual Probe Hand Pieces
DPHP Dual Probe Hand Piece 1 0.5 Features: • 1/4” diameter RWMA II copper shank • 8 AWG cabling
DPHP LP Dual Probe Hand Piece 1.5 0.7 Features: • 1/4” diameter brass shank • 8 AWG cabling • Accepts 1/16” diameter electrodes
DPHP MP Dual Probe Hand Piece 1.5 0.7 Features: • 5/8” diameter brass shank • 4 AWG cabling • Accepts 1/8” diameter electrodes
DPHP HP Dual Probe Hand Piece 2 0.9 Features: • 7/8” diameter brass shank • 1 AWG cabling • Accepts 3/16” diameter electrodes
2014 Product CatalogConfidential
lbs kg
18 SunstoneEngineering.com18
Tweezers
PART NUMBER DESCRIPTION WEIGHT PRICE PRODUCT PICTURE
HP RWMA Package Hand Piece RWMA Package 3 1.5 Features: • DPHP • SPHP • THP
• $50.00 discount
THP Tweezer Hand Piece 1 0.5 Features: • Opposed welding hand piece
PTHP LP Pressure Actuated Tweezer 4 2 Hand Piece – Low Power Features: • Opposed welding hand piece • Accepts 3/16” electrodes • 1 pair of RWMA II electrodes (EL187RWMA-ANG) • Molybdenum electrodes available • Pressure Range 0.5 – 6 lbf • 8 AWG cabling standard
PTHP MP Pressure Actuated Tweezer 4 2 Hand Piece – Moderate Power Features: • Opposed welding hand piece • Accepts 3/16” electrodes • 1 pair of RWMA II copper electrodes • Tungsten electrodes available • Pressure Range 1 – 10 lbf • 4 AWG cabling standard
PTHP HP Pressure Actuated Tweezer 4 2 Hand Piece – High Power Features: • Opposed welding hand piece • Accepts 3/16” electrodes • 1 pair of RWMA II copper electrodes • Tungsten electrodes available • Pressure Range 1 – 10 lbf • 1 AWG cabling standard
THP Pneumatic Tweezer Hand Piece 7 3 Features: • Air-actuated tweezer-style hand piece • Force ranges: 5-50lbs • Adjustable throat up to 1.75” • 1” Stroke Distance
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
19 SunstoneEngineering.com19
Electrodes
RESISTANCE WELDING ELECTRODES 0.5 0.2
EL125BATT 3” Battery-Style Glidcop Electrodes w/ Dual Offset Tips
EL250BATT 4.5” Battery-Style Glidcop Electrodes w/ Dual Offset Tips
EL062RWMA 2” RWMA II Electrode Blanks (1/16” diameter)
EL125RWMA 2” RWMA II Electrode Blanks (1/8” diameter)
EL125RWMA3 2” RWMA II Electrode Blanks (1/8” diameter)
EL187RWMA-ANG 3” RWMA II Electrode Blanks (3/16” diameter) 45 deg angle
EL187RWMA 2” RWMA II Electrode Blanks (3/16” diameter)
EL250RWMA 2” RWMA II Electrode Blanks (1/4” diameter)
EL125TUNG 2” Tungsten Electrode Blanks (1/8” diameter)
EL125TUNG7 7” Tungsten Electrode Blanks (1/8” diameter)
EL187TUNG 2” Tungsten Electrode Blanks (3/16” diameter)
EL187TUNG7 7” Tungsten Electrode Blanks (3/16” diameter)
EL125MOLY 2” Molybdenum Electrode Blanks (1/8” diameter)
EL187MOLY 2” Molybdenum Electrode Blanks (3/16” diameter)
EL187MOLY-ANG 3” Molybdenum Electrode Blanks (3/16” diameter) 45 deg angle
EL125CUW 2” Copper Tungsten Electrode Blanks (1/8” diameter)
EL125CUW8 8” Copper Tungsten Electrode Blanks (1/8” diameter)
EL250CUW 2” Copper Tungsten Electrode Blanks (1/4” diameter)
EL250CUW8 8” Copper Tungsten Electrode Blanks (1/4” diameter)
HTER Honeycomb Tack Electrode (radiused)
HTEF Honeycomb Tack Electrode (flat)
EL-ROLL 2” Copper Wheel w/Brass Carrier
MEL-AG Adjustable Gap Glidcop Micro Electrodes
MEL-AMO Adjustable Gap Molybdenum Micro Electrodes
MEL-BMO Fixed/Bonded 0.0015” Gap Molybdenum Micro Electrodes
MEL-TCB-FL 1/8” Tungsten Flat Thermal Compression Micro Electrodes
MEL-TCB-SL 1/8” Tungsten Slant Thermal Compression Micro Electrodes
MEL-TCB-SY 1/8” Tungsten Symmetrical Thermal Compression Micro Electrodes
MEL-TCB-U 1/8” Tungsten U-Shaped Thermal Compression Micro Electrodes
TET 1.0mm 1.0mm Diameter (15 count)
TET 0.5mm 0.5mm Diameter (15 count)
TET 1.0mm/0.5mm 1.0mm and 0.5mm Diameter (20 count, 10 of each size)
TET 1.5mm 1.5mm Diameter (15 count)
PULSE ARC WELDING ELECTRODES
MICRO RESISTANCE WELDING ELECTRODES
Honeycomb
Roll Spot
MEL-AG MEL-AMO MEL-BMO
MEL-TCB-FL
MEL-TCB-SL
MEL-TCB-SY
2014 Product CatalogConfidential
PART NUMBER DESCRIPTION WEIGHT PRODUCT PICTURElbs kg
20 SunstoneEngineering.com20
Accessories
TM6.8KR For Most Milwaukee/Hitachi and Hilti Drill Packs .25 0.1
TM10KA For Most Snap-On Drill Packs .25 0.1
TM10KRB For Most Dewalt/Rigid/Makita Drill Packs .25 0.1
DRML Dremel Tool 1.5 0.7
• For shaping tungsten electrodes (Comes with 1 Diamond Disk)
DDD Diamond Dremel Disk 0.25 0.1 (5-pack)
• For shaping tungsten electrodes
FS Foot Switch 1 0.5
FS2 Two Stage Foot Switch 7 3.5
• For use with Pneumatic Weld Heads to trigger CD, AC, and Pulse-Arc power supplies
1AWG Welding Cables 2 1
• For welding conductive materials such as copper • Battery pack manufacturing
GEM-GUARD Gem Guard 2 1
• A paste to cover and protect diamonds, gems, rubbies, etc when welding next to them.
ESHC External Switch Hookup Cable 1 0.5
• Shielded
THERMISTERS
DREMEL
FOOT SWITCHES
CABLES
TM6.8KRTM10KA
TM10KRB