Post on 24-Sep-2020
transcript
T-Splines and Isogeometric Analysis
Michael A. Scott University of Texas at Austin
T-Splines, Inc.
NAFEMS 2020 Vision of Engineering Analysis and Simulation
Rectangular Not watertight Trimmed
NURBS
NAFEMS 2020 Vision of Engineering Analysis and Simulation
NURBSRectangular Not watertight Trimmed
NAFEMS 2020 Vision of Engineering Analysis and Simulation
NURBSRectangular Not watertight Trimmed
NAFEMS 2020 Vision of Engineering Analysis and Simulation
NURBSRectangular Not watertight Trimmed
NAFEMS 2020 Vision of Engineering Analysis and Simulation
T-Splines
Model by Tibor Toth
NAFEMS 2020 Vision of Engineering Analysis and Simulation
T-Splines
NURBS T-Splines
Non-rectangular Local control Analysis Suitable
NAFEMS 2020 Vision of Engineering Analysis and Simulation
T-SplinesNon-rectangular Local control Analysis Suitable
NAFEMS 2020 Vision of Engineering Analysis and Simulation
T-SplinesNon-rectangular Local control Analysis Suitable
NAFEMS 2020 Vision of Engineering Analysis and Simulation
Compatibility
“The T-Spline technology addresses some important limitations in conventional NURBS surfaces and is forward and backward compatible with NURBS.”
Dr. Rich Riesenfeld, NURBS inventor, University of Utah
NAFEMS 2020 Vision of Engineering Analysis and Simulation
Compatibility
NURBST-Splines
NAFEMS 2020 Vision of Engineering Analysis and Simulation
T-Splines for Rhino
NAFEMS 2020 Vision of Engineering Analysis and Simulation
T-Spline Trimming Curve Conversion
NAFEMS 2020 Vision of Engineering Analysis and Simulation
NAFEMS 2020 Vision of Engineering Analysis and Simulation
NAFEMS 2020 Vision of Engineering Analysis and Simulation
Trimmed NURBS Untrimmed T-Spline
NAFEMS 2020 Vision of Engineering Analysis and Simulation
NAFEMS 2020 Vision of Engineering Analysis and Simulation
Error
NAFEMS 2020 Vision of Engineering Analysis and Simulation
Error
NAFEMS 2020 Vision of Engineering Analysis and Simulation
NAFEMS 2020 Vision of Engineering Analysis and Simulation
NAFEMS 2020 Vision of Engineering Analysis and Simulation
NAFEMS 2020 Vision of Engineering Analysis and Simulation
NAFEMS 2020 Vision of Engineering Analysis and Simulation
NAFEMS 2020 Vision of Engineering Analysis and Simulation
T-Splines and Isogeometric Analysis
NAFEMS 2020 Vision of Engineering Analysis and Simulation
T-Splines and Isogeometric Analysis
NAFEMS 2020 Vision of Engineering Analysis and Simulation
T-Splines and Isogeometric Analysis