Post on 14-Jan-2022
transcript
Talent, Innovative and Tactical Execution
AC
CR
ED
ITE
D T
RA
ININ
G P
RO
GR
AM
S C
ATA
LO
G
2016
Version 2.1
2
© 2016 Wollam Groups , LLC All Rights Reserved.
Accredited Training Programs Catalog
TABLE OF CONTENTS
Message from our CEO ......................................................................... 3
Our Training Programs and Certifications .............................................. 3
Our Accredited Instructors ...................................................................... 4
Global Recognized Experts .................................................................... 4
Professional Credentials ......................................................................... 4
Method of Training .................................................................................. 5
IACET EXEMPLAR Training Organization of the Year ........................... 5
Accredited Training Programs ................................................................ 6
API Q1 Professional Series .................................................................... 10
API Q2 Professional Series .................................................................... 12
Auditing Professional Series ................................................................... 14
ISO Professional Series .......................................................................... 18
Lean Six Sigma Series ............................................................................ 20
Educational Training Series ..................................................................... 20
Talent, Innovative and Tactical Execution
3
© 2016 Wollam Groups , LLC All Rights Reserved.
MESSAGE FROM OUR CEO Dear professional colleagues and friends,
I would like to take a moment and thank you for entrusting your
education, training and competency requirements with Wollam Groups.
There are a lot of training organizations, but Wollam Groups remains
the only accredited training provider in the petroleum & natural gas
industry globally. While we are very proud of our heritage and
grassroots in the petroleum & natural gas industry, we service all
industry segments and work with universities, trade organizations,
regulatory agencies and the private and public sectors to help them
achieve their education, training, and competency goals. Bryan Wollam
Our Training Programs and Certifications
All the programs in this catalog are accredited. They
are unlike any other training course in the industry.
Each program takes approximately 3,500 man hours
to develop and complete the approval process. Our
programs start with a needs analysis with the
industry in which we are serving. This is followed by
a detailed course design that undergoes an extensive
review and approval process. This is followed by
development, and an extensive red team process
made up of external experts to ensure all interested parties identified in our needs analysis have
been represented, and the training meets their needs. Once this is completed, we are required to
conduct three (3) pilot studies with our accredited trainers to validate the design and determine the
Continuing Education Units (CEUs) granted. All of the above, often results in changes which
undergoes a thorough change process, review, and re-approval. Upon completion, we offer the
accredited CEUs. Accredited training organizations, like Wollam Groups, can certify an individual to
specification, such as API Q1, API Q2 or a product specification. We have undertaken an extensive
qualification process to ensure every one of our programs meet these extensive requirements, and
we are authorized to certify individuals. This catalog is constantly evolving as we have a team of
educators, industry experts, course designers working on new programs based on industry needs.
4
© 2016 Wollam Groups , LLC All Rights Reserved.
Our Accredited Instructors
Each and every one of our instructors undergo
one of the most extensive competency
qualification processes in the education
industry. Each instructor is required to have a
minimum of 10 years of industry experience. In
addition, they must be a certified IRCA Auditor
for the industry in which they are teaching. Once
these basic requirements have been fulfilled,
they must undergo a competency validation
process which requires demonstration of actual
knowledge, implementation, and evaluation
against the subject matter being taught under our Advisory Division. Once the above have
been accomplished, they complete a trainer application which includes a validation of
qualifications. Upon application approval, they start their training qualification process, consisting
of more than a half dozen teaching sessions under the direction and supervision of one of our
accredited instructors. In addition, they receive an extensive IACET trainer evaluation by our
master educators who hold master degree and Ph.D. in education. We are the only training
organization that has such a robust competency qualification process for instructors and this is
how we ensure each of our participants leave with the knowledge and understanding that they
entrusted Wollam Groups to provide.
Global Recognized Expert
All our programs include hardbound textbooks for our facilitators, state of the art participant
workbooks, practical applications, case studies and industry models to reinforce the subject
matter being taught. Our instructors are deemed competent and qualified to conduct
competency assessments on each participant, which is in part why we certify individuals. In
addition, trade organizations, universities, private and public companies come to us to develop
their programs; for example, we developed API-U API Q1 and Q2 Fundamentals and
Practitioner Programs.
Professional Credentials
Upon completion of any of our accredited programs, each of
our participants receive the certifications, which includes a
Registered Professional Number (RPN™), leather bound
credentials stating their earned designations and accredited
Continuing Education Units (CEUs). In addition, they may
elect to receive their wallet license with electronic credential
verification services (CVS), which shows their identity and
qualifications simply by holding the license in front of any
smartphone.
5
© 2016 Wollam Groups , LLC All Rights Reserved.
Method of Training
Wollam Groups has invested heavily in our state of the art training facilities for in-class
instruction. In addition, we invested in technology that allows us to have participants join our
traditional classes virtually, known as PetroWise™.
During the course, the participants are with a live
instructor, and interact with other participants around
the globe. All practical application activities,
exercises and breakout sessions are conducted
through our virtual classroom. Every one of our web
programs receives the same accreditation as our in-
class courses. Wollam Groups also offers private
training where our instructors are assigned to
companies for routine training or for one time
courses. For private training, we utilize the client’s facilities to conduct the programs. We now
have exclusive partnerships with the industry’s best training organizations and offer classroom
training programs throughout North America, South America, Middle East, Caspian Region and
Europe.
IACET EXEMPLAR TRAINING ORGANIZATION OF THE YEAR!!
In 2016, Wollam Groups was selected by the IACET Award Committee as the
winner of the “Exemplar Training Organization Award, IACET's most
prestigious award. This award honors exemplary, results-oriented programs
that have demonstrated significant and relevant impact on the populations and
industries served. We are truly honored and humbled to receive such a
prestigious award, competing against major universities, private and public
training companies around the globe. Wollam Groups’ decision to become
accredited to IACET was not an easy one, but one that we knew our clients expected. We do this
to ensure participants receive the highest level of training available. We are pleased to bring our
award-winning accredited training programs to the petroleum & natural gas industry.
For those that have completed any of our programs know the quality that we provide and why
thousands trust their training and competency to us each year. After reviewing our catalog, if there
is an interest in course, click on the embedded link to open the specific course brochure. For more
information, please contact us at info@wollamgroups.com or contact our Education Division by
sending an email to Natalie Schwab at natalieschwab@wollampag.com.
6
© 2016 Wollam Groups , LLC All Rights Reserved.
Petroleum & Natural Gas Quality Practitioner (Course Code: WG-002-4)
This course was designed working with the operators for their quality
personnel and engineers. It includes the following subjects: quality concepts
& principals, quality engineering fundamentals, API Q2 Specification, API
Q1 Specification, API Monogram Program, developing, implementing and
assessing service quality plans and product quality plans. This course is
fully accredited and participants receive their unique Registered
Professional Number (RPN™), leather bound credentials and Quality
Practitioner designation and 4.0 accredited Continuing Education Units
(CEUs).
Lean Six Sigma Series (Course Code: WG-002-5)
The Lean Six-Sigma Series consists of Yellow Belt, Green Belt and
Black Belt Training. This series is designed to meet the ASQ
requirements while being fully accredited by the International
Association of Continuing Education and Training (IACET). These
courses are instructed by certified black belts who are also qualified
instructors. They are fully accredited and participants receive their
unique Registered Professional Number (RPN™); leather bound
credentials, Lean-Six Sigma designations and between 2.4 and 16 accredited Continuing Education
Units (CEUs) depending on the program completed.
Educational Training Series (Course Code: WG-001-1)
The Education Training Series is not like any other in the industry and
has been designed for those who are responsible for developing,
maintaining, managing or delivery education, training or competency
assessments. This series of training is based around the International
Association of Education & Training (IACET) and consists of a Train-the
-Trainer Program, IACET Essentials and IACET Practitioner. These
courses are instructed under our master educators and includes
practical applications, discussion points, case studies and competency assessments. These courses
are fully accredited and participants receive their unique Registered Professional Number (RPN™),
leather bound credentials, and between 2.5 and 4.0 accredited Continuing Education Units (CEUs)
depending on the program completed.
Wollam Groups’ training programs are fully accredited and back by IACET, who was
founded by the Department of Education and accredited through ANSI.
ACCREDITED TRAINING PROGRAMS ACCREDITED TRAINING PROGRAMS
7
© 2016 Wollam Groups , LLC All Rights Reserved.
API Q1 Professional Series (Course Code: WG-002-1)
This series of courses consist of 1 day Generalist, 3 day Essential,
5 day Professional courses. The courses cover the entire specification
and includes practical applications, discussion points, case studies and
competency assessments. The courses are fully accredited and
participants receive their unique Registered Professional Number
(RPN™), leather bound credentials, and between 1.0 and 4.0
accredited Continuing Education Units (CEUs) depending on the
program completed. These are the most advanced courses in the industry and are instructed by
certified trainers and professionals.
API Q2 Professional Series (Course Code: WG-002-2)
This series of courses consist of 1 day Generalist; 3 day Essential,
5 day Professional courses. The courses cover the entire specification
and includes practical applications, discussion points, case studies and
competency assessments. The courses are fully accredited and
participants receive their Registered Professional Number (RPN™);
leather bound credentials, and between 1.0 and 4.0 accredited
Continuing Education Units (CEUs) depending on the program
completed. These are the most advanced courses in the industry and are instructed by certified
trainers and professionals.
Auditing Professional Series (Course Code: WG-002-3)
Our auditing courses are like no other in the industry. They include an
in-depth analysis of the specifications from an auditor perspective. We
ensure that the standard is not only understood but also the intent and
application of the clauses. In addition to the training, the participants
put knowledge to use by joining an audit team and conduct an audit
against an actual management system to include all of its records and
objective evidence or lack thereof. During the audit process, the
participants undergo a number of formative and summative assessments (competency) by industry
experts, master educators, and certified auditors. Upon completion, audit team reports are evaluated
by the audit committee. Upon successful completion, the participants receive their Registered
Professional Number (RPN™), leather bound credentials, accredited CEUs and earn Auditor
designation.
ACCREDITED TRAINING PROGRAMS
8
© 2016 Wollam Groups , LLC All Rights Reserved.
ACCREDITED TRAINING PROGRAMS
ISO Professional Series (Course Code: WG-003-1)
This series of courses covers ISO 9001, ISO 14001, OHSAS
18001, ISO 45001, ISO 27001 and ISO 31000. Courses for
each standard range from a 1 day transition course to a 3 day
Practitioner program. They are fully accredited and participants
receive their Registered Professional Number (RPN™), leather
bound credentials, and between 1.0 and 2.5 accredited
Continuing Education Units (CEUs) depending on the program
completed.
API Product Specification Series (Course Code: WG-002-6)
This series of courses covers the API product specifications. Each
product specification has three courses which includes a 1 day
Generalist; 3 day Practitioner and 5 day Professional. These
courses range in design from ensuring participants leave with a good
understanding of the specification to being technically qualified and
competent, depending on the course completed. They are fully
accredited and participants receive their unique Registered
Professional Number (RPN™), leather bound credentials, and
between 1.0 and 5.0 accredited Continuing Education Units (CEUs)
depending on the program completed. These are the only
accredited product specification courses in the industry and are taken by operators,
manufacturers, service providers, drilling contractors, auditors, consultants and government
agencies.
9
© 2016 Wollam Groups , LLC All Rights Reserved.
Accredited Short Series and Webinars
Our short series programs consist of programs that range
from 1 to 4 hours that are instructed in our training facilities,
on client locations or through webinars. The programs are all
accredited and range from .01 to .5 accredited CEUs. These
courses range from executive leadership training on API Q2
to individual topics like contract review, operations planning,
risk management, design and development, contingency
planning, procurement & critical suppliers, service execution,
service quality plans, product quality plans, preventive maintenance and inspection test plans,
etc. Our short series range from $95 to $395, making them affordable while meeting the
training requirements outlined in the specifications. Upon completion, each participant will
receive a PDF electronic certificate of completion, accredited CEUs and a copy of the
handouts.
ACCREDITED TRAINING PROGRAMS
Registered Professional Number
Upon successful completion of qualifying courses, participants will receive an
unique Registered Professional Number and be enrolled in the Registered
Professional Network™ (RPN). This network includes unique registration
numbers for each professional designation received through Wollam Groups
and allows the industry to locate registered professionals for their areas of
expertise.
PetroWise™
All of our courses are available in both a traditional classroom setting or in our
state of the art virtual learning environment, known as PetroWise™. Our virtual
training program is done with live certified instructors, as well as allowing our
participants to interact with professionals around the globe. For more
information click here.
10
© 2016 Wollam Groups , LLC All Rights Reserved.
API Q1 Generalist – 1 Day, 1.0 CEU (Course Code: WG-002-1.3)
This course was designed to provide an organization an awareness of the
specification. It also meets the requirement for training for support functions,
such as procurement, contracts, sales, engineering, demand management,
finance, human resources, operations, field coordinators, supervisors, and
managers. Upon completion, participants receive 1.0 accredited CEUs and
a certificate of completion. This program meets competency as called out in
the specification due to the accredited CEUs and knowledge assessment
conducted during the course.
API Q1 Essentials – 3 Days, 3.0 CEUs
(Course Code: WG-002-1.1)
This course covers the entire specification and includes practical applications,
skills assessments, and knowledge checks. Upon completion, the
participants receive their Registered Professional Number (RPN™), leather
bound credentials and 3.0 accredited CEUs. This program meets competency
requirements due to the accredited CEUs, practical applications, skills
assessment, and examination. This program is designed for anyone who has
a responsibility to deploy, implement or maintain their management systems,
to include support functions and operations. For more information click here.
API Q1 Professional – 5 Days, 4.0 CEUs
(Course Code: WG-002-1.2)
This course is our most coveted course as participants earn the designation of
a certified professional. The program is fully accredited and meets the
competency requirements called out in the specification. Upon completion,
participants receive their Registered Professional Number (RPN™), leather
bound credentials, API Q1 Professional designation, license and 4.0
accredited CEUs. This program is designed for quality and HSE personnel,
auditors, managers responsible to oversee their management systems. For
more information click here.
API Q1 PROFESSIONAL SERIES
© 2016 Wollam Groups , LLC All Rights Reserved.
10
11
© 2016 Wollam Groups , LLC All Rights Reserved.
API Q1 Auditor Fundamentals – 2 Days, 2.0 CEUs (Course Code: WG-002-3.4)
This program covers the entire specification from an auditor's point of view. This
is the only course in the industry that not only covers the specification but shows
all of the linkages, dependencies, how key definitions are used in the
specification and how to audit them. It also includes auditor briefs on all sections
on what to look for and how to audit. Upon completion, participants receive their
Registered Professional Number (RPN™), leather bound credentials and 2.0
accredited CEUs.
API Q1 Technical Application for Lead Auditors – 3 Days, 2.5 CEUs (Course Code: WG-002-3.3)
This is the industry’s most advanced auditing course and teaches skilled and
qualified auditors how to audit the specification, from the corporate office out to
the rig site. This includes auditing a full management system with a skilled audit
team made up of operators, manufacturers, drilling contractors, lead auditors,
and industry SMEs. Upon completion, the audit committee reviews and scores
the audit. In order to enter into these program, participants must have completed
the API Q1 Essentials or Professional and must have audit experience. If they
have not obtained their auditor credentials, then they will also have to complete
the API Q1 Auditor Fundamentals prior to entry. This program has been taken
by most of the international, national and stated owned operators, and
manufacturers. Upon completion, participants receive their Registered Professional Number
(RPN™), leather bound credentials and 2.5 accredited CEUs. This program meets all
competency requirements due to the accreditation, skills and competency assessment and
examination. For more information click here.
API Q1 Implementation Practitioner – 5 Days, 4.0 CEUs (Course Code: WG-002-1.4)
This program was developed by working with international oil field
companies. The program includes the API Q1 Essentials plus one day on
developing and accessing a Product Quality Plan (PQP). This program has
been taken by the industry’s largest operators and service providers and results
in a Registered Professional Number (RPN™), leather bound credentials with
the designation of certified API Q1 Implementation Practitioner. The program
meets all competency requirements due to the accreditation, knowledge
assessments, skills assessment conducted by API Q1 professionals and master
educators.
API Q1 PROFESSIONAL SERIES
11
12
© 2016 Wollam Groups , LLC All Rights Reserved.
API Q2 Generalist – 1 Day, 1.0 CEU
(Course Code: WG-002-2.3)
This course was designed to provide an organization an awareness of the
specification. It also meets the requirements for training for support functions,
such as procurement, contracts, sales, engineering, demand management,
finance, human resources, operations, field coordinators, supervisors, and
managers. Upon completion, participants receive 1.0 accredited CEUs and a
certificate of completion. This program meets competency as called out in
the specification due to the accredited CEUs and knowledge assessment
conducted during the course. For more information click here.
API Q2 Essentials – 3 Days, 3.0 CEUs (Course Code: WG-002-2.1)
This course covers the entire specification and includes practical applications,
skills assessments, and knowledge checks. Upon completion, the participants
receive their Registered Professional Number (RPN™), leather bound
credentials and 3.0 accredited CEUs. This program meets competency
requirements due to the accredited CEUs, practical applications, skills
assessment, and examination. This program is designed for anyone who has
a responsibility to deploy, implement or maintain their management systems,
to include support functions and operations.
For more information click here.
API Q2 Professional – 5 Days, 4.0 CEUs (Course Code: WG-002-2.2)
This course is our most coveted course as participants earn the designation
of a certified professional. The program is fully accredited and meets the
competency requirements called out in the specification. Upon completion,
participants receive their Registered Professional Number (RPN™), leather
bound credentials, API Q2 Professional designation, license and 4.0
accredited CEUs. This program is designed for quality and HSE personnel,
auditors, managers responsible to oversee their management systems.
For more information click here.
API Q2 PROFESSIONAL SERIES
© 2016 Wollam Groups , LLC All Rights Reserved. © 2016 Wollam Groups , LLC All Rights Reserved.
12
13
© 2016 Wollam Groups , LLC All Rights Reserved.
API Q2 Auditor Fundamentals – 2 Days, 2.0 CEUs (Course Code: WG-002-3.1)
This program covers the entire specification from an auditor's point of view. This is
the only course in the industry that not only covers the specification but shows all
of the linkages, dependencies, how key definitions are used in the specification
and how to audit them. It also includes auditor briefs on all sections on what to
look for and how to audit. The program was assessed by Exxon, BP, Shell,
Chevron, Halliburton, Baker, Schlumberger, Transocean. Upon completion,
participants receive their Registered Professional Number (RPN™), leather bound
credentials and 2.0 accredited CEUs. For more information click here.
API Q2 Technical Application for Lead Auditors – 3 Days, 2.5 CEUs (Course Code: WG-002-3.2)
This is the industry’s most advanced auditing course and teaches skilled and
qualified auditors how to audit the specification from the corporate office to the rig
site. This includes auditing a full management system with a skilled audit team
made up of operators, service providers, drilling contractors, lead auditors, and
industry SMEs. Upon completion, the audit committee reviews and scores the
audit. In order to enter into these program, participants must have completed the
API Q2 Essentials or Professional and must have audit experience. If they have
not obtained their auditor credentials, then they will also have to complete the API
Q2 Auditor Fundamentals prior to entry. This program has been taken by most of
the international, national and stated owned operators, and service providers.
Upon completion, participants receive their Registered Professional Number (RPN™), leather
bound credentials and 2.5 accredited CEUs. This program meets all competency requirements
due to the accreditation, skills and competency assessment and examination.
For more information click here.
API Q2 Implementation Practitioner – 5 Days, 4.0 CEUs (Course Code: WG-002-2.4)
This program was developed by working with the international oil field
companies. The program includes the API Q2 Essentials plus two days on
developing and accessing a Service Quality Plan (SQP). This program has been
taken by the industry’s largest operators and service providers and results in a
Registered Professional Number (RPN™), leather bound credentials with the
designation of certified API Q2 Implementation Practitioner. The program meets
all competency requirements due to the accreditation, knowledge assessments,
skills assessment conducted by API Q2 professionals and master educators.
API Q2 PROFESSIONAL SERIES
13
14
© 2016 Wollam Groups , LLC All Rights Reserved.
AUDITING PROFESSIONAL SERIES
Auditor Fundamentals – 2 Days, 2.0 CEUs (Course Code: WG-002-3.5)
This course teaches the fundamentals of auditing to includes: audit planning,
open and closing meeting, conducting the audit, developing and an effective
audit program, auditor closure and report writing, auditor competencies, leading
an audit team, and conflict resolution. Upon completion, the participants receive
a certificate of completion, accredited CEUs, and leather bound credentials.
API Q1 Auditor Fundamentals – 2 Days, 2.0 CEUs (Course Code: WG-002-3.4)
This program covers the entire specification from an auditor's point of view.
This is the only course in the industry that not only covers the specification but
shows all of the linkages, dependencies, how key definitions are used in the
specification and how to audit them. It also includes auditor briefs on all
sections on what to look for and how to audit. Upon completion, participants
receive their Registered Professional Number (RPN™), leather bound
credentials and 2.0 accredited CEUs.
API Q1 Technical Application for Lead Auditors – 3 Days, 2.5 CEUs
(Course Code: WG-002-3.3)
This is the industry’s most advanced auditing course and teaches skilled and
qualified auditors how to audit the specification from the corporate office to the
rig site. This includes auditing a full management system with a skilled audit
team made up of operators, manufacturers, drilling contractors, lead auditors,
and industry SMEs. Upon completion, the audit committee reviews and
scores the audit. In order to enter into these program, participants must have
completed the API Q1 Essentials or Professional and must have audit
experience. If they have not obtained their auditor credentials, then they will
also have to complete the API Q1 Auditor Fundamentals prior to entry. This
program has been taken by most of the international, national and stated owned operators, and
manufacturers. Upon completion, participants receive their Registered Professional Number
(RPN™), leather bound credentials and 2.5 accredited CEUs. This program meets all
competency requirements due to the accreditation, skills and competency assessment and
examination. For more information click here.
© 2016 Wollam Groups , LLC All Rights Reserved. © 2016 Wollam Groups , LLC All Rights Reserved.
15
© 2016 Wollam Groups , LLC All Rights Reserved.
AUDITING PROFESSIONAL SERIES
API Q2 Auditor Fundamentals – 2 Days, 2.0 CEUs (Course Code: WG-002-3.1)
This program covers the entire specification from an auditor's point of view.
This is the only course in the industry that not only covers the specification but
shows all of the linkages, dependencies, how key definitions are used in the
specification and how to audit them. It also includes auditor briefs on all
sections on what to look for and how to audit. The program was assessed by
Exxon, BP, Shell, Chevron, Halliburton, Baker, Schlumberger,
Transocean. Upon completion, participants receive their Registered
Professional Number (RPN™), leather bound credentials and 2.0 accredited
CEUs. For more information click here.
API Q2 Technical Application for Lead Auditors – 3 Days, 2.5 CEUs (Course Code: WG-002-3.2)
This is the industry’s most advanced auditing course and teaches skilled and
qualified auditors how to audit the specification, from the corporate office to the
rig site. This includes auditing a full management system with a skilled audit
team made up of operators, service providers, drilling contractors, lead
auditors, and industry SMEs. Upon completion, the audit committee reviews
and scores the audit. In order to enter into these program, participants must
have completed the API Q2 Essentials or Professional and must have audit
experience. If they have not obtained their auditor credentials, then they will
also have to complete the API Q2 Auditor Fundamentals prior to entry. This
program has been taken by most of the international, national and stated owned operators, and
services providers. Upon completion, participant receive their Registered Professional Number
(RPN™), leather bound credentials and 2.5 accredited CEUs. This program meets all
competency requirements due to the accreditation, skills and competency assessment and
examination. For more information click here.
© 2016 Wollam Groups , LLC All Rights Reserved.
16
AUDITING PROFESSIONAL SERIES
Product Specification Auditor Endorsement – 2 Days, 2.0 CEUs (Course Code: WG-002-3.6)
These series of courses covers all of the API Product
Specifications. Auditors select the specification and enter the 2 days
technical auditor program, where they learn the specification and
must demonstrate how to audit the specification effectively. During
the audit, the auditors undergo both formative and summative
assessments (competency) and upon completion receive their API
product specification endorsement on their auditor license. This
program has a prerequisite which requires participants to have completed either the API Q1
Fundamentals for Auditors or the API Q1 Technical Application for Lead Auditor prior to adding
product specification endorsements.
ISO Standards Auditor Endorsement – 2 Days, 2.0 CEUs (Course Code: WG-002-3.7)
These series of courses covers the ISO 9001, ISO 14001, OHSAS
18001 and the ISO 45001 Standards. Auditors select the standard to
which they seek endorsement and enter the 2 days technical auditor
program, where they learn the standard from an auditor perspective and
must demonstrate how to audit the standard effectively. During the
audit, the auditors undergo both formative and summative assessments
(competency) and upon completion receive their ISO standard
endorsement on their auditor license. This program has a prerequisite which requires participants
to have completed the Auditor Fundamentals course prior to adding ISO standard endorsements.
Master Auditor (Petroleum & Natural Gas) – 5 Days, 5.0 CEUs (Course Code: WG-002-3.8)
This program has been designed for seasoned and experienced
lead auditors. This program has been designed to ensure the
auditor has an in-depth understanding and knowledge of the API
Q1 and Q2 specifications and demonstrates competency for
performing an audit in the petroleum & natural gas industry. This
program is built around practical applications, summative and
formative assessment which ensures knowledge transfer and competence. The following
prerequisites must be satisfied prior to entry into this program: 1) completion of an API Q1 and Q2
Specification Course, and 2) completion of either an API Q1 or Q2 Auditor Fundamentals and
Technical Application for Lead Auditor Course. Upon completion, the participants receive their
Registered Professional Number (RPN™), leather bound credentials with the designation of
Master Auditor (petroleum & natural gas) and accredited CEUs.
© 2016 Wollam Groups , LLC All Rights Reserved. © 2016 Wollam Groups , LLC All Rights Reserved. © 2016 Wollam Groups , LLC All Rights Reserved. © 2016 Wollam Groups , LLC All Rights Reserved.
17
© 2016 Wollam Groups , LLC All Rights Reserved.
AUDITING PROFESSIONAL SERIES
ISO 9001 Technical Application for Lead Auditors – 3 Days, 2.5 CEUs (Course Code: WG-003-1.4)
This is the most advanced auditing course and teaches skilled and qualified
auditors how to audit the specification. This includes auditing a full
management system with a skilled audit team made up of lead auditors and
industry SMEs. Upon completion, the audit committee reviews and scores
the audit. In order to enter into these program, participants must have
completed the ISO 9001 Fundamentals or Practitioner and must have audit
experience. Upon completion, participant receive their Registered
Professional Number (RPN™), leather bound credentials and 2.5 accredited
CEUs. This program meets all competency requirements due to the
accreditation, skills and competency assessment and examination.
© 2016 Wollam Groups , LLC All Rights Reserved.
18
© 2016 Wollam Groups , LLC All Rights Reserved.
ISO PROFESSIONAL SERIES
ISO 9001 Generalist – 1 Day, 0.8 CEU (Course Code: WG-003-1.1)
This course was designed to provide an organization an awareness of the standard. It also meets the requirements for training for support functions, such as procurement, contracts, sales, engineering, demand management, finance, human resources, operations, field coordinators, supervisors, and managers. Upon completion, participants receive 0.8 accredited CEUs and a certificate of completion. This program meets competency requirements due to the accredited CEUs and knowledge assessment conducted during the course. For more information click here.
ISO 9001 Fundamentals – 3 Days, 3.0 CEUs (Course Code: WG-003-1.2)
This course covers the entire standard and includes practical applications,
skills assessments, and knowledge checks. Upon completion, the
participants receive their Registered Professional Number (RPN™), leather
bound credentials and 3.0 accredited CEUs. This program meets
competency requirements due to the accredited CEUs, practical
applications, skills assessment, and examination. This program is designed
for anyone who has a responsibility to deploy, implement or maintain their
management systems, to include support functions and operations.
For more information click here.
ISO 9001 Practitioner – 4 Days, 3.2 CEUs (Course Code: WG-003-1.3)
This course is our most coveted ISO 9001 course as participants earn the
designation of a Certified Practitioner. The program is fully accredited and
meets competency requirements. Upon completion, participants receive
their Registered Professional Number (RPN™), leather bound credentials,
ISO 9001 Practitioner designation, license and 3.2 accredited CEUs. This
program is designed for quality and HSE personnel, auditors, managers
responsible to oversee their management systems.
For more information click here.
© 2016 Wollam Groups , LLC All Rights Reserved.
18
19
© 2016 Wollam Groups , LLC All Rights Reserved.
ISO PROFESSIONAL SERIES
ISO 9001 Technical Application for Lead Auditors – 3 Days, 2.5 CEUs (Course Code: WG-003-1.4)
This is the most advanced auditing course and teaches skilled and
qualified auditors how to audit the specification. This includes auditing a
full management system with a skilled audit team made up of lead auditors
and industry SMEs. Upon completion, the audit committee reviews and
scores the audit. In order to enter into these program, participants must
have completed the ISO 9001 Fundamentals or Practitioner and must
have audit experience. Upon completion, participant receive their
Registered Professional Number (RPN™), leather bound credentials and
2.5 accredited CEUs. This program meets all competency requirements
due to the accreditation, skills and competency assessment and
examination.
© 2016 Wollam Groups , LLC All Rights Reserved.
19
20
© 2016 Wollam Groups , LLC All Rights Reserved.
LEAN-SIX SIGMA SERIES
© 2016 Wollam Groups , LLC All Rights Reserved.
Lean Six Sigma Yellow Belt – 3 Days, 2.4 CEUs (Course Code: WG-002-4.1)
This (Yellow Belt) is the introductory level for Six Sigma and no prior
knowledge is required. The participant will learn terminology and understand
the basics of Lean Six Sigma and apply basic methodology and quantifiable
tools to an improvement project. This course highlights the benefits of Lean
Six Sigma in the oil & gas industry, focuses on critical examples and unique
industry problems. This 24 hours course helps develop skills and strategies
for successful Lean Six Sigma implementation. Upon completion, participants
receive their Registered Professional Number (RPN™), leather bound
credentials and 2.4 accredited CEUs. For more information click here.
EDUCATIONAL TRAINING SERIES
Train-the-Trainer – 5 Days, 2.4 CEUs (Course Code: WG-001-1.1)
The Train-the-Trainer course was designed to qualify individuals to effectively
design and lead accredited training courses and programs. The objective of
the training is to provide participants with sufficient understanding, knowledge,
and skills needed to successful deploy, and execute highly effective training
programs in which they are providing instruction. The program utilizes the
latest teaching methodologies, practices, and techniques as well as practical
application in this course to ensure both prospective and approved providers
leave with the required knowledge and practical application skills to ensure
they are utilizing effective training techniques, meeting the ANSI/IACET 1-
2013 Standard for Continuing Education and Training. Upon completion,
participants receive their Registered Professional Number (RPN™), leather
bound credentials and 2.4 accredited CEUs. For more information click here.
Wollam Groups offers the above trainings in North America, Middle East, Caspian Region and South
America. Contact us at info@wollamgroups.com or visit www.wollamgroups.com for more information
such as eligibility for group discount, corporate discount, private classes and training dates..
21
©2016 Wollam Groups, LLC
5847 San Felipe St., Suite 1700
Houston, TX 77057
Tel: (1) 281-758-5518
Visit us on the web: www.wollamgroups.com