Post on 14-Apr-2017
transcript
Luoyang Sheng Iron Refractories Co.,Ltd.
Casthouse refractories & Solution for iron makingCasthouse refractories & Solution for iron making
www.sirefractories.cominfo@sirefractories.com
About Us
ShengIron Refractories is a major producer of monolithic refractory products for casthouse. We deliver value to our clients by providing them with our solutions and services from production to installation.
More than 10 years, ShengIron provide quality products and relevant services for iron and steel making industries.
With our strong and independent technical team, ShengIronAbout Us With our strong and independent technical team, ShengIronRefractories has the appropriate knowledge to develop and further optimize the most advanced and reliable solution for our customers.
In addition, our professional technical team offers technical consultant and on-site supports, which is easier for our clients to choose a right product and get better performance.
History &
Development2010 comply with ISO9001 QMS 05
2003 started from a trading house012005 built the first production022007 renamed to ShengIron Refractories & established new production plant
032009 set up our own technical center04
Development2010 comply with ISO9001 QMS 052013 sales turnover exceed 16 million US$06
Service ImprovementCustomerorientated
Quality
For Iron Making
Tap Hole Clay
Castable for Iron Trough
Plastic for Mud Liner of Taphole
Water Free Pressing Mix
Environmental Anhydrous Tap Hole Clay
V-Ti Anhydrous Tap Hole Clay
For Steel Making
Precast Products for Tundish
Work Lining for Tundish
Impact PadSlag Skimmer
Gunning MixTrowelling MixRamming Mass
Alloy Cored Wire
Graphite Electrode
Recarburizer
Silicon Carbide
Anhydrous Tap Hole Clay
Introduction
This series product is developed with corundum, Al2O3-SiO2 Based materials, SiC, Si3N4 and coke as main raw materials and bonded with resin. Products are designed according to
Environmental Tap Hole Clay
V-Ti Tap Hole Clay
and coke as main raw materials and bonded with resin. Products are designed according to the volume of blast furnaces.
Features
... Easy and reliable plugging and opening of the taphole
... Long stable taphole length and long tapping time
... Quick and reliable hardening of the taphole clay
... Minimize taphole splashing while operating
... User-friendly by providing easier clean-out of the mud gun nozzle
... Low emission
Reference table
Anhydrous Tap Hole Clay
Application Plant Name BF Type Plant Name BF Type
ZhongTie Equipment 1350m³, 2500m³ Shougang ShuiCheng 2800m³
Yanshan Iron & Steel 2800m³ Zenith Steel Group 1580m³
This series products have already been used by many iron and
steel production plants and provide very good performance. For
more info, please write to info@sirefractories.com, our experts
will recommend a product for you.
JingYe Group 1080m³ Valin Steel 1080m³
Tianjin Metallurgy Zha San 1260m³ YongGang Group 1080m³
Xining Special Steel 1080m3 ChengGang Group 650m³
Anhydrous Tap Hole Clay
Successful Cases
Valin Steel: 1080m³ Blast FurnaceBefore: Average tapping period 45-50 mins
Tapping operation times: 16-18After: Average tapping period 80-100 mins
Tapping operation times: 12-14Successful
CasesZhongTie Equipment 2500m³ Blast Furnace
Before: Average tapping period 90 minsAfter: Average tapping period 130 mins
Yanshan Iron & Steel 2800m³ Blast FurnaceBefore: Average tapping period 100 mins
After: Average tapping period 150 mins
This series low and ultra-low cement castable is developed with
dense corundum, brown corundum, superior bauxite and silicon
carbide as main raw materials.
This series product includes Al2O3-SiC-C castable and high
alumina castable, which can be used for iron trough, dropping
Castable for Iron Trough
spot, slag trough, tilting spout, work lining for slag skimmer and
trough cover.
Features
It performs well on slag erosion and penetration. It is featured with good thermal shock
resistance, spalling resistance and high strength and low expansion under high
temperature. In addition, it does not adhere to slag or molten iron.
Castable for Iron Trough
1
Dismantling
62
Frame Work
3 4 5
Casting Moulding Baking Tapping
We also provide repair and maintenance work for iron trough/runner. Here below is the general process. For standard operation, please write to info@sirefractories.com, our experts give instruction for operation according working conditions.
1 62 3 4 5
Castable for Iron Trough
Plant Name BF Type No. of Runner used
Plant Name BF Type No. ofRunner used
ShougangShuiGang
2800m³ 1 ZhongTie Equipment 2500m³ 4
Yanshan 2800m³ 2 Minmetals Yingkou 2650m³ 2
Application reference table
The hot metal throughput is around 120,000t to 130,000t, even reach to 160,000t without intermediate repair for blast furnace of medium size.
YanshanIron&Steel
2800m³ 2 Minmetals Yingkou 2650m³ 2
Valin Steel 1080m³ 1 JingYe Group 1080m³ 2
Tianjin MetallurgyZha San
1260m³ 2 Ruifeng Steel 1350m³ 1
View of workshop, office building, technical centre & recreation centre
Technical
CentreCentre
Quality assurance: ensure traceable and controllable quality
Technical service: from pre-sales to after sales
1. Strictly obey quality management system
2. Well equipped lab & well trained staff
3. Real time monitor on production
4. Collaboration with research institutes & universities
1. Our chief engineer have over 10 years
overseas working experience, and is very
familiar with the modern technology.
2. Our experts own many patents, they helped
many plants solved their real problems.
3. Products are designed according to the
working condition.
4. Quick response to your questions and provide
on-site consultant is necessary.
THANKSTHANKS
For more information about Luoyang Sheng Iron RefractoriesCo., Ltd. , Please call us @ +86 379 69528485 or write to us info@sirefractories.com, you can also visit our website: www.sirefractories.com