Technical Specifications - Team Eagle Ltd. · 828 Valentine Ave. (P.O. Box 154) Pacific, WA 98047...

Post on 11-Oct-2020

0 views 0 download

transcript

Total width (mm) 2780 1700 2420 2780 2780 2960 3140

Total length (mm) 905 905 905 905 1994 1994 1994

Total height (mm) 1169 1169 1169 1169 1403 1403 1403

Weight (kg) 1580 1040 1370 1580 2150 2330 2510

Working width (mm) 2470 1390 2110 2470 2470 2650 2830

Oil demand (l/min) 20 20 20 20 20 20 20

Working pressure (bar) 180 180 180 180 180 180 180

Recommended weight of

working machine (kg) >2500 >5000 >5000 >5000 >5000 >5000

Team Eagle Ltd. (Canada)10 Trent Dr. (P.O. Box 670)

Campbellford, OntarioK0L 1L0

1-866-241-3264info@team-eagle.ca

Team Eagle Inc. (U.S.)828 Valentine Ave. (P.O. Box 154)

Pacific, WA98047

1-877-835-7171info@team-eagle.com

TEAM EAGLE

Technical Specifications

www.team-eagle.ca

Technical Specifications

TruckModelK14

PushableModel

T8 T12 T14

Wheel LoaderModel

P14 P15 P16

V-1

Icebreaker Devices for All Working Machines

RAIKO K FOR TRUCKSThe Raiko K can be used together with other truckaccessories, such as a belly blade, offering excellentresults in one single run. The advantage of usinga truck is that the site to be maintained can be quicklyreached, so work can begin sooner. This providesnotable savings in time and money. This device is alsorecognized for achieving good results in repairinggravel roads in summertime.

RAIKO P FOR WHEEL LOADERSEquipped with a dedicated blade, The Raiko P forwheel loaders is designed to be pushed in front.The entire device can be operated by using the wheelloader’s controls. Wheel loaders are well suited forremoving hard-packed ice layers from roads, yardsand light traffic routes.

RAIKO Icebreaker Features and Benefits

Breaks up ice and compacted snow without damage to pavementFlexible and freely rotating spiked roller sectionsVirtually soundless due to its unique structureLow operating costsMultiple passes can destroy several inches of solid ice

RAIKO T FOR TRACTORSRaiko Icebreakers which are pushed in front ofa working machine are equipped with a tiltcylinder. These devices increase the utilityof working machines and so improve cost-efficiency.