Post on 27-Jun-2015
description
transcript
Test driven development
The right way
Paweł Głasek
@PawelGlasek
The right way?
Czym TDD nie jest
Napisaniem testów wszystkich obiektów, przed implementacją funkcjonalności.
Czym TDD nie jest
Wszystkie testy przed implementacją
● Ciężko zaprojektować odpowiedni design oraz zmieniać go w trakcie kodowania
● Ciężko przewidzieć zmiany w obiektach klas już obecnych w systemie
● Ciężko przewidzieć współdziałanie komponentów
● Niektóre warunki brzegowe nigdy nie występują – zbyt duża ilość niepotrzebnych testów
● Często niepełne pokrycie
Czym TDD nie jest
Sztuką pisania unit testów
Czym TDD nie jest
Just Unit tests
● Błyskawicznie prowadzi do „przemockowania”
● Nie testuje współdziałania poszczególnych obiektów
● Pomimo zmian w powiązanych, ale zmockowanych klasach testy przechodzą
● Niektóre warunki brzegowe nigdy nie występują – zbyt duża ilość niepotrzebnych testów
● Brak motywacji do pisania testów
Czym TDD nie jest
Napisaniem testów po zakończeniu pisania kodu produkcyjnego.
Czym TDD nie jest
Testy po napisaniu kodu produkcyjnego
● Brak motywacji do pisania testów po fakcie
● Wiele przypadków pozostaje nieprzetestowanych
● Niektóre warunki brzegowe nigdy nie występują
● Brak poczucia sensu pisania testów w ten sposób
● Częste problemy z testowalnością napisanego kodu
● Nuda
The right way
TDD
Agile'owa technika wytwarzania programowania
Kent Beck
Test Driven Development By Example
Red – green – refactor
Zasady wujka Boba:
1. Nie wolno pisać kodu produkcyjnego, dopóki nie istnieje failujący test.
2. Nie wolno napisać więcej testów, niż jest to niezbędne do faila (niekompilujący się kod również uznajemy jako fail).
3. Nie wolno pisać więcej kodu produkcyjnego niż jest to niezbędne, by testy przechodziły.
Po wiedz mi, a za pomnę. Po każ mi, a za pamiętam.
Rozkład liczby na czynniki pierwsze
TDD style
Prime factorization – TDD style
class TestPrimeFactors(unittest.TestCase):
"""
Prime factors test suite.
"""
def test_prime_factors(self):
self.assertListEqual([], prime_factors(1))
Prime factorization – TDD style
>> nose2 test.prime_factors
==================================================
ERROR: test_prime_factors (test.prime_factors.TestPrimeFactors)
----------------------------------------------------------------------
NameError: global name 'prime_factors' is not defined
----------------------------------------------------------------------
Ran 1 test in 0.000s
FAILED (errors=1)
Prime factorization – TDD style
def prime_factors(number):
"""
Performs prime factorization.
:param number: Number to be factorized.
:type number: int
:rtype: list
"""
return []
Prime factorization – TDD style
>>nose2 test.prime_factors
.
----------------------------------------------------------------------
Ran 1 test in 0.001s
OK
Prime factorization – TDD style
class TestPrimeFactors(unittest.TestCase):
"""
Prime factors test suite.
"""
def test_prime_factors(self):
self.assertListEqual([], prime_factors(1))
self.assertListEqual([2], prime_factors(2))
Prime factorization – TDD style
>>nose2 test.prime_factors
F
================================================
FAIL: test_prime_factors (test.prime_factors.TestPrimeFactors)
----------------------------------------------------------------------
AssertionError: Lists differ: [2] != []
----------------------------------------------------------------------
Ran 1 test in 0.001s
FAILED (failures=1)
Prime factorization – TDD style
def prime_factors(number):
return []
def prime_factors(number):
factors = []
if number > 1:
factors.append(2)
return factors
Prime factorization – TDD style
>>nose2 test.prime_factors
.
----------------------------------------------------------------------
Ran 1 test in 0.001s
OK
Prime factorization – TDD style
class TestPrimeFactors(unittest.TestCase):
"""
Prime factors test suite.
"""
def test_prime_factors(self):
self.assertListEqual([], prime_factors(1))
self.assertListEqual([2], prime_factors(2))
self.assertListEqual([3], prime_factors(3))
Prime factorization – TDD style
>>nose2 test.prime_factors
F
================================================
FAIL: test_prime_factors (test.prime_factors.TestPrimeFactors)
----------------------------------------------------------------------
AssertionError: Lists differ: [3] != [2]
----------------------------------------------------------------------
Ran 1 test in 0.001s
FAILED (failures=1)
Prime factorization – TDD style
def prime_factors(number):
factors = []
if number > 1:
factors.append(2)
return factors
def prime_factors(number):
factors = []
if number > 1:
factors.append(number)
return factors
Prime factorization – TDD style
>>nose2 test.prime_factors
.
----------------------------------------------------------------------
Ran 1 test in 0.001s
OK
Prime factorization – TDD style
class TestPrimeFactors(unittest.TestCase):
"""
Prime factors test suite.
"""
def test_prime_factors(self):
self.assertListEqual([], prime_factors(1))
self.assertListEqual([2], prime_factors(2))
self.assertListEqual([3], prime_factors(3))
self.assertListEqual([2, 2], prime_factors(4))
Prime factorization – TDD style
>>nose2 test.prime_factors
F
================================================
FAIL: test_prime_factors (test.prime_factors.TestPrimeFactors)
----------------------------------------------------------------------
AssertionError: Lists differ: [2, 2] != [4]
----------------------------------------------------------------------
Ran 1 test in 0.001s
FAILED (failures=1)
Prime factorization – TDD style
def prime_factors(number):
factors = []
if number > 1:
factors.append(number)
return factors
def prime_factors(number):
factors = []
if number > 1:
if number % 2 == 0:
factors.append(2)
number /= 2
factors.append(number)
return factors
Prime factorization – TDD style
>>nose2 test.prime_factors
F
================================================
FAIL: test_prime_factors (test.prime_factors.TestPrimeFactors)
----------------------------------------------------------------------
AssertionError: Lists differ: [2] != [2, 1]
----------------------------------------------------------------------
Ran 1 test in 0.001s
FAILED (failures=1)
Prime factorization – TDD style
def prime_factors(number):
factors = []
if number > 1:
if number % 2 == 0:
factors.append(2)
number /= 2
factors.append(number)
return factors
def prime_factors(number):
factors = []
if number > 1:
if number % 2 == 0:
factors.append(2)
number /= 2
if number > 1:
factors.append(number)
return factors
Prime factorization – TDD style
>>nose2 test.prime_factors
.
----------------------------------------------------------------------
Ran 1 test in 0.001s
OK
Prime factorization – TDD style
def prime_factors(number):
factors = []
if number > 1:
if number % 2 == 0:
factors.append(2)
number /= 2
if number > 1:
factors.append(number)
return factors
def prime_factors(number):
factors = []
if number > 1:
if number % 2 == 0:
factors.append(2)
number /= 2
if number > 1:
factors.append(number)
return factors
Prime factorization – TDD style
>>nose2 test.prime_factors
.
----------------------------------------------------------------------
Ran 1 test in 0.001s
OK
Prime factorization – TDD style
class TestPrimeFactors(unittest.TestCase):
"""
Prime factors test suite.
"""
def test_prime_factors(self):
self.assertListEqual([], prime_factors(1))
self.assertListEqual([2], prime_factors(2))
self.assertListEqual([3], prime_factors(3))
self.assertListEqual([2, 2], prime_factors(4))
self.assertListEqual([5], prime_factors(5))
Prime factorization – TDD style
>>nose2 test.prime_factors
.
----------------------------------------------------------------------
Ran 1 test in 0.001s
OK
Prime factorization – TDD style
class TestPrimeFactors(unittest.TestCase):
"""
Prime factors test suite.
"""
def test_prime_factors(self):
self.assertListEqual([], prime_factors(1))
self.assertListEqual([2], prime_factors(2))
self.assertListEqual([3], prime_factors(3))
self.assertListEqual([2, 2], prime_factors(4))
self.assertListEqual([5], prime_factors(5))
self.assertListEqual([2, 3], prime_factors(6))
Prime factorization – TDD style
>>nose2 test.prime_factors
.
----------------------------------------------------------------------
Ran 1 test in 0.001s
OK
Prime factorization – TDD style
class TestPrimeFactors(unittest.TestCase):
"""
Prime factors test suite.
"""
def test_prime_factors(self):
self.assertListEqual([], prime_factors(1))
self.assertListEqual([2], prime_factors(2))
self.assertListEqual([3], prime_factors(3))
self.assertListEqual([2, 2], prime_factors(4))
self.assertListEqual([5], prime_factors(5))
self.assertListEqual([2, 3], prime_factors(6))
self.assertListEqual([7], prime_factors(7))
Prime factorization – TDD style
>>nose2 test.prime_factors
.
----------------------------------------------------------------------
Ran 1 test in 0.001s
OK
Prime factorization – TDD style
class TestPrimeFactors(unittest.TestCase):
"""
Prime factors test suite.
"""
def test_prime_factors(self):
self.assertListEqual([], prime_factors(1))
self.assertListEqual([2], prime_factors(2))
self.assertListEqual([3], prime_factors(3))
self.assertListEqual([2, 2], prime_factors(4))
self.assertListEqual([5], prime_factors(5))
self.assertListEqual([2, 3], prime_factors(6))
self.assertListEqual([7], prime_factors(7))
self.assertListEqual([2, 2, 2], prime_factors(8))
Prime factorization – TDD style
>>nose2 test.prime_factors
F
================================================
FAIL: test_prime_factors (test.prime_factors.TestPrimeFactors)
----------------------------------------------------------------------
AssertionError: Lists differ: [2, 2, 2] != [2, 4]
----------------------------------------------------------------------
Ran 1 test in 0.001s
FAILED (failures=1)
Prime factorization – TDD style
def prime_factors(number):
factors = []
if number > 1:
if number % 2 == 0:
factors.append(2)
number /= 2
if number > 1:
factors.append(number)
return factors
def prime_factors(number):
factors = []
if number > 1:
while number % 2 == 0:
factors.append(2)
number /= 2
if number > 1:
factors.append(number)
return factors
Prime factorization – TDD style
>>nose2 test.prime_factors
.
----------------------------------------------------------------------
Ran 1 test in 0.001s
OK
Prime factorization – TDD style
class TestPrimeFactors(unittest.TestCase):
def test_prime_factors(self):
self.assertListEqual([], prime_factors(1))
self.assertListEqual([2], prime_factors(2))
self.assertListEqual([3], prime_factors(3))
self.assertListEqual([2, 2], prime_factors(4))
self.assertListEqual([5], prime_factors(5))
self.assertListEqual([2, 3], prime_factors(6))
self.assertListEqual([7], prime_factors(7))
self.assertListEqual([2, 2, 2], prime_factors(8))
self.assertListEqual([3, 3], prime_factors(9))
Prime factorization – TDD style
>>nose2 test.prime_factors
F
================================================
FAIL: test_prime_factors (test.prime_factors.TestPrimeFactors)
----------------------------------------------------------------------
AssertionError: Lists differ: [3, 3] != [9]
----------------------------------------------------------------------
Ran 1 test in 0.001s
FAILED (failures=1)
Prime factorization – TDD style
def prime_factors(number):
factors = []
if number > 1:
while number % 2 == 0:
factors.append(2)
number /= 2
if number > 1:
factors.append(number)
return factors
def prime_factors(number):
factors = []
if number > 1:
while number % 2 == 0:
factors.append(2)
number /= 2
while number % 3 == 0:
factors.append(3)
number /= 3
if number > 1:
factors.append(number)
return factors
Prime factorization – TDD style
>>nose2 test.prime_factors
.
----------------------------------------------------------------------
Ran 1 test in 0.001s
OK
Prime factorization – TDD style
def prime_factors(number):
factors = []
if number > 1:
while number % 2 == 0:
factors.append(2)
number /= 2
while number % 3 == 0:
factors.append(3)
number /= 3
if number > 1:
factors.append(number)
return factors
def prime_factors(number):
factors = []
divisor = 2
while number > 1:
while number % divisor == 0:
factors.append(divisor)
number /= divisor
divisor += 1
if number > 1:
factors.append(number)
return factors
Prime factorization – TDD style
>>nose2 test.prime_factors
.
----------------------------------------------------------------------
Ran 1 test in 0.001s
OK
Prime factorization – TDD style
def prime_factors(number):
factors = []
divisor = 2
while number > 1:
while number % divisor == 0:
factors.append(divisor)
number /= divisor
divisor += 1
if number > 1:
factors.append(number)
return factors
def prime_factors(number):
factors = []
divisor = 2
while number > 1:
while number % divisor == 0:
factors.append(divisor)
number /= divisor
divisor += 1
return factors
Prime factorization – TDD style
>>nose2 test.prime_factors
.
----------------------------------------------------------------------
Ran 1 test in 0.001s
OK
Prime factorization – TDD style
class TestPrimeFactors(unittest.TestCase):
"""
Prime factors test suite.
"""
def test_prime_factors(self):
self.assertListEqual([], prime_factors(1))
self.assertListEqual([2], prime_factors(2))
self.assertListEqual([3], prime_factors(3))
self.assertListEqual([2, 2], prime_factors(4))
self.assertListEqual([5], prime_factors(5))
self.assertListEqual([2, 3], prime_factors(6))
self.assertListEqual([7], prime_factors(7))
self.assertListEqual([2, 2, 2], prime_factors(8))
self.assertListEqual([3, 3], prime_factors(9))
self.assertListEqual([2, 2, 3, 3, 5, 7 , 11, 13], prime_factors(2*2*3*3*5*7*11*13))
Prime factorization – TDD style
>>nose2 test.prime_factors
.
----------------------------------------------------------------------
Ran 1 test in 0.001s
OK
Clean code that works
Zalety TDD
● Prostota iteracji designu● Pokrycie testami● Możliwość refactoringu● Zdecouplowany, testowalny kod● Nietrywialny design● Ograniczenie wykorzystania debugera● Brak strachu przez zmianami w kodzie
Problemy z TDD
● Konieczność zmiany stylu myślenia● Początkowo mało intuicyjna technika● Pokusa pisania kodu produkcyjnego bez testów
Pytania
Dziękuję