Post on 28-Aug-2020
transcript
The 12th Korea-Japan Joint Symposium on Composite Materials
The 1st Korea-China-Japan Joint Symposium on Composite Materials
2019. 12. 5 ~ 7Changwon Exhibition Convention Center (CECO), Changwon, Korea
Hosted by: The Korean Society for Composite Materials Dept. of Mechanical Engineering, CNU
Sponsored by: Gyeongsangnam-do Changwon-si Gyeongnam Convention & visitors Bureau
Korea Tourism Organization
2 | The 12th Korea-Japan Joint Symposium on Composite Materials
Schedule
December 5 (Thursday) December 6 (Friday) December 7 (Saturday)
08:30 ~ 09:00 Registration
09:00 ~ 09:10 Opening Ceremony Discussion on the development direction of Composite Material for
industry(09:00 ~ 10:30)
09:10 ~ 09:50 Plenary Speech
09:50 ~ 10:30 Plenary Speech
10:30 ~ 10:40 Break Time
10:40 ~ 12:10 Parallel Session
12:10 ~ 13:10 Lunch, Room 600 (6F) Conference tour(09:00 ~ 17:00)
13:10 ~ 13:50 Plenary Speech
13:50 ~ 14:10 JEC WORLD (ASIA)
Registration(14:00 ~ 17:00)14:10 ~ 14:20 Break Time
14:20 ~ 15:50 Parallel Session
Technical tour(15:30 ~ 17:30)15:50 ~ 16:20 Poster Session &
Break Time
16:20 ~ 18:05 Parallel Session
Welcome Reception(Baekje Samgyetang*)
(17:30 ~ 19:00)
18:05 ~ Break Time
18:30 ~ BanquetRoom 600 (6F)
*Baekje Samgyetang, Sangnam branch (백제계삼탕, 상남점)
- address: 20, madimi-ro 73beon-gil, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Republic of Korea
- 4km(10min by car), Estimated taxi fare : 7 USD
3 The 1st Korea-China-Japan Joint Symposium on Composite Materials |
Schedule
Chair Jungil Song (Changwon National University, President of KSCM)
Co-ChairsJinsong Leng (Harbin Institute of Technology)
Toshio Ogasawara (Tokyo University of Agriculture and Technology)
Local organizing
committe
Ilkwon Oh (Korea Advanced Institute of Science and Technology)
Young-Bin Park (Ulsan National Institute of Science and Technology)
Eui Sup Shin (Chonbuk National University)
Gunjin Yun (Seoul National University
Road Map
* Parking charges Notice (max 5,000 KRW)
Changwon Central
Station
5km (10min by car), Estimated taxi fare : 8 USD
City Bus for Chanwon Central Station ↔ CECO : no.220, 221
Changwon Station
6.5km (15min by car), Estimated taxi fare : 9 USD
City Bus for Changwon Station ↔ CECO : no.102, 109, 113
City Bus for Changwon Station ↔ the City7Mall : no.102, 109, 113, 703, 710, 757
Masan Station
9.7km (20min by car), Estimated taxi fare : 13 USD
City Bus for Masan Station ↔ CECO : no.102, 109
City Bus for Masan Station ↔ the City7Mall : no.102, 109, 703
M-STAY Hotel Changwon
4 | The 12th Korea-Japan Joint Symposium on Composite Materials
Venue Overview● Oral SessionⅠ : Room 301 (3F) ● Lunch & Banquet : Room 600 (6F)● Oral SessionⅡ : Room 302 (3F) ● Poster Session : Room 301 Lobby (3F)● Oral SessionⅢ : Room 601 (6F)
Lunch & Banquet
602
600B 600A
603
604
605
606
607
Convention Hall (Ⅰ)
Convention Hall (Ⅱ)
Convention Hall (Ⅲ)
301 302
Poster Session
3F
Oral SessionⅢ 601
6F
Plenary SpeechOral SessionⅠ
Oral SessionⅡ
5 The 1st Korea-China-Japan Joint Symposium on Composite Materials |
Technical tourDecember 5 (Thursday)Time: 15:30 – 17:30Starting point: Bus stop in front of CECOVenue: Doosan Heavy Industries & Construction (http://www.doosanheavy.com/en/)
To attend and visit the Technical Floor and undertake a tour of the facility, you must be suitably attired including: - sensible, closed-in shoes (NOTE: high heels, sandals and thongs are NOT permitted) - no loose garments or accessories that can be easily trapped or caught
Conference tourDecember 7 (Saturday)Time: 09:00 – 17:00Starting point: Bus stop in front of CECOVenue: Tongdosa temple,
Gimhae Buncheong Ceramics Museum(金海粉靑陶瓷博物館)
6 | The 12th Korea-Japan Joint Symposium on Composite Materials
Program : Oral Session ⅠDecember 6 (Friday) Room 301 (3F)Time ID Title Chairs, Authors
9:00~9:10Opening CeremonyWelcoming Address by Prof. J. I. Song(President of the KSCM)
9:10~9:50Plenary Speech Chairman: Joong Hee Lee(Jeonbuk National University)Speaker : Prof. Jinsong Leng(Harbin Institute of Technology)Title : Smart active composites and 4D printing technologies
9:50~10:30Plenary Speech Chairman: Joong Hee Lee(Jeonbuk National University)Speaker : Prof. Koichi Goda(Yamaguchi University)Title : Markov Process Modeling for Strength Estimation of Fibrous Composites
10:30~10:40 Coffee break
December 6 (Friday) Oral Session I Room 301 (3F)
Energy, environmental and bio composites I Chairman: Il-Kwon OH(KAIST)Sangmin LEE(Chung-Ang University)
10:40~12:10
A-01 Ionic Polymer Composite Actuator Based On A Highly-conductive And Flexible Graphene Electrode Rassoul TABASSIAN, Il-Kwon OH(KAIST)
A-02 Nitrogen And Sulfur-rich Porous Conductive Covalent Organic Frameworks For Diverse Energy Applications MANMATHA MAHATO,Il-Kwon OH(KAIST)
A-03 Effect Of Z-anchor Method On Strength Properties Of Flax Sliver-reinforced Composites Yoh KATAOKA, Takuya YAMASAKI, Koichi GODA(Yamaguchi University)
A-04 The Enhancement Of The Output Performance Via Ionic Liquid And Visco-poroelastic Materials For Triboelectric Nanogenerators Hee Jae HWANG, Dukhyun CHOI(Kyung Hee University)
A-05 One-Step Electrodeposited NiCoSe2 Nanosheet@Ni-mesh Network Transparent Electrode For Flexible Transparent Solid-State Supercapacitor
Soram Bobby SINGH, Thangjam Ibomcha SINGH, Jiu Yi DAI, Tolendra KSHETRI, Nam Hoon KIM, Joong Hee LEE(Jeonbuk National University)
A-06 Triboelectric Nanogenerator Based On Ion-enhanced Field Emission Effect Jihoon CHUNG, Deokjae HEO(Chung-Ang University), Dongseob KIM (Korea Institute of Industrial Technology), Sangmin LEE(Chung-Ang University)
12:10~13:10 Lunch Break, Room 600 (6F)
13:10~13:50Plenary Speech Chairman: Heoung-Jae CHUN(Yonsei University)Speaker : Prof. Jang-Kyo Kim(Hong Kong University of Science and Technology)Title : Graphene/polymer nanocomposites for flexible wearable sensors
13:50~14:10 JEC WORLD (ASIA)14:10~14:20 Coffee break
Energy, environmental and bio composites II Chairman: Nam Hoon KIM(Jeonbuk National University) Fenghua Zhang (Harbin Institute of Technology)
14:20~15:50
A-07 Highly Active P-doped CuMnSe Nanowire Based Triboelectric Nanogenerator Integrated Structural Supercapacitor For Energy Harvesting And Storage
BIPLAB K. DEKA, Ankita HAZARIKA, Seonghwan LEE, Young-Bin PARK, Hyung Wook PARK(UNIST)
A-08 Effect Of Water Absorption On Tensile Properties Of Cellulose Nanofiber/Glass Fiber Hybrid Composite Material
Masashi SHINJU, Yoshinobu Shimamura, Tomoyuki Fujii, Keiichiro Togo (Shizuoka University)
A-09 Synergistically Tuning HER And OER Performance Via 2D Metal-organic Framework Derived Iron-Nickel Phosphides Shelled CuS Nanowires
Duy Thanh TRAN, Huu Tuan LE, Van Hien HOA, Nam Hoon KIM, Joong Hee LEE(Jeonbuk National University)
A-10 Preparation And Mechanical Characterization Of Cellulose Nanofiber Reinforced Epoxy Films Using Solution Dipping Technique
Devendran THIRUNAVUKARASU, Yoshinobu Shimamura, Tomoyuki Fujii, Keiichiro Togo(Shizuoka University)
A-11 Evaluation Of Thermal And Interfacial Properties Of Carbon Fiber Reinforced Composites With Bamboo Charcoal Contents
Jong-Hyun KIM, Pyeong-Su SHIN, Joung-Man PARK (Gyeongsang National University)
A-12 Magnetic Field Induced Shape Memory Polymer Composites and 4D Printed Structures Fenghua Zhang, Yanju Liu, Jinsong Leng(Harbin Institute of Technology)
15:50~16:20 Poster Session Room 301 Lobby (3F) & Coffee break
Energy, environmental and bio composite III / Manufacturing Chairman: Dukhyun CHOI(Kyung Hee University)Yan LI(Tongji University)
16:20~18:05
A-13 A Numerical Model For The Thermo-stamping Of Woven Fabric Thermoplastic Prepregs
Youkun GONG, Huiming NING(Chongqing University), Ning HU(Hebei University of Technology)
A-14 Toughness Improvement Of PC/PA6 Composite By Investigation Of Particle-debonding Mechanism Min-Kyeom KIM, Jonghwan SUHR(Sungkyunkwan University)
A-15 Strength Improvement By Fibrillation Of A Ramie Fiber / Bio-based Resin Composite Material Takehito OZAKI, Toyoki MATSUNAGA, Koichi GODA(Yamaguchi University)
A-16 The Frictionless Design For High Performance Hybrid System Nghia Dinh HUYNH, Dukhyun CHOI(Kyung Hee University)
A-17 Effect Of Processing Pressure On Mechanical Properties Of 3D-printed Carbon Fiber Reinforced Composites Zhongsen ZHANG, Yan LI(Tongji University)
A-18 Microstructural Characterization Of 3D-printed Basalt Fiber-reinforced PLA Composites Siwon YU(KAIST), Jun Yeon HWANG(KIST), Soon Hyung HONG(KAIST)
A-19 Scaling laws and snap-through events in indentation of perforated membranes Fei Jia(Harbin Institute of Technology), Martine Ben Amar(Sorbonne Universite)
18:30~20:30 Banquet at Room 600 (6F)
7 The 1st Korea-China-Japan Joint Symposium on Composite Materials |
Program : Oral Session ⅡDecember 6 (Friday) Room 301 (3F)Time ID Title Chairs, Authors
9:00~9:10Opening CeremonyWelcoming Address by Prof. J. I. Song(President of the KSCM)
9:10~9:50Plenary Speech Chairman: Joong Hee Lee(Jeonbuk National University)Speaker : Prof. Jinsong Leng(Harbin Institute of Technology)Title : Smart active composites and 4D printing technologies
9:50~10:30Plenary Speech Chairman: Joong Hee Lee(Jeonbuk National University)Speaker : Prof. Koichi Goda(Yamaguchi University)Title : Markov Process Modeling for Strength Estimation of Fibrous Composites
10:30~10:40 Coffee break
December 6 (Friday) Oral Session Ⅱ Room 302 (3F)
MMC / Modelling and analysis of composites I Chairman: Ho Jin RYU(KAIST)Yongbum CHOI(Hiroshima University)
10:40~12:10
B-01 Development Of High Strength And High Thermal Conductivity Mold Material With Hetero Structure
Hitoshi SAWADA, Kenjiro SUGIO, Yongbum CHOI, Gen SASAKI (Hiroshima University)
B-02 Both Effects Of Powder Mixing And Spark Sintering For 30vol.%TiB2 Strengthened Steels With Ti Macro-Alloying MMCs YUJIAO KE, KAZUHIRO MATSUGI, YONGBUN CHOI(Hiroshima University)
B-03 Effects Of SiC Nanorod On Properties Of SiCf/SiC Composites Prepared By Chemical Vapor Infiltration
Ji Yeon PARK, Daejong Kim, Hyeon Geun Lee, Weon-Ju Kim (Korea Atomic Energy Research Institute), Ho Wook Lee(Dandan Ltd)
B-04 Effect Of Surface Structure Of Carbon Materials On Reactivity For Iron Shunsuke FUJII, Kenjiro SUGIO, Yongbum CHOI, Gen SASAKI (Hiroshima University)
B-05 Relationship Between Effective Thermal Conductivity And Interfacial Thermal Resistance Of Al-AlN And Al-Si Composites
Takuya KAWATA, Kenjiro SUGIO, Yongbum CHOI, Gen SASAKI (Hiroshima University)
B-06 XCT Analysis On Stainless Steel - Aluminum Dispersion Plate Hyeong-Jin KIM, Ho Jin RYU(KAIST)12:10~13:10 Lunch Break, Room 600 (6F)
13:10~13:50Plenary Speech Chairman: Heoung-Jae CHUN(Yonsei University)Speaker : Prof. Jang-Kyo Kim(Hong Kong University of Science and Technology)Title : Graphene/polymer nanocomposites for flexible wearable sensors
13:50~14:10 JEC WORLD (ASIA)14:10~14:20 Coffee break
MMC / Modelling and analysis of composites I Chairman: GUNJIN YUN(Seoul National University)Tatsuro KOSAKA(Kochi University of Technology
14:20~15:50
B-07 Incremental Mean-fields Nonlinear Micromechanics Model For Ductile Damaged Composite Materials
HYOUNGJUN LIM, HOIL CHOI, TOMAS WEBBE KEREKES, FEIYAN ZHU, GUNJIN YUN(Seoul National University)
B-08 Effect Of Matrix On Characteristics For Multipurpose Of Carbon Short Fiber Reinforced Composite Xuan MENG, Yongbum CHOI, Kazuhiro MATSUGI(Hiroshima University)
B-09 Natural Frequency Analysis Of Laminated Composite Beams With Embedded Shape Memory Alloys Saeed KAMARIAN, Jung Il SONG(Changwon national university)
B-10 Three-dimensional Constitutive Model Of Woven Fabric-reinforced Shape Memory Polymer Composites And Its Applications Seok Bin HONG, Jinsu KIM, Woong-Ryeol YU(Seoul National University)
B-11 Optimization Of CFRP Road Bike Frame By A Response Surface Method Tatsuro KOSAKA(Kochi University of Technology), Seiya SUGIMURA(J Trust)
B-12 Adhesive Bond Failure Of Single-lap Composite Joints Seyyed Mohammad HASHEMINIA, Beom Chul PARK, Heoung-Jae CHUN (Yonsei University), Jong-Chan PARK(Hyundai Motor Group)
15:50~16:20 Poster Session Room 301 Lobby (3F) & Coffee break
MMC / Modelling and analysis of composites II Chairman: Young-Bin PARK(Ulsan National Institute of Science and Technology)M.N. Prabhakar(Changwon National University)
16:20~18:05
B-13 Study On Resin Flow Numerical Analysis Reflecting In-situ Compaction Behavior Of Tow-prepreg Laminate According To Cure Cycle Gyeongsu JEONG, Jaehyung OH, Seongsu KIM(KAIST)
B-14 Post Bucking Analysis Of A CFRP/Honeycomb Sandwich Panel Subjected To Bending Load
Mae OIWA, Toshio OGASAWARA(Tokyo University of Agriculture and Technology), Tsuyoshi OGURI, Takamasa MATSUDA, Hajime YOSHINAGA(JAMCO)
B-15 Adhesion Properties Of Glass Fiber/Epoxy Composites With Adding Air Bubbles For Sound Insulation
Pyeong-Su SHIN, Jong-Hyun KIM, Yeong-Min Baek, Ha-Seung Park, Joung-Man PARK(Gyeongsang National University)
B-16 Effect Of Ag-Tipped-NixCo1−xSe Nanowires On Personal Thermal Management Device With Energy Harvesting Ability
Ankita HAZARIKA, Biplab K DEKA, Do Young KIM, Young-Bin PARK, Hyung Wook PARK(Ulsan National Institute of Science and Technology)
B-17 Strengthening Mechanism Of Interface Between CNF-Grafted Fibers And Resin Hikaru INOUE, Tatsuro KOSAKA, Mouhamadou Moustapha SARR (Kochi university of technology)
B-18 Ultrathin, Flexible, And Highly Sensitive Power-generation Sensor Based On Carbon Fiber Composite With Combined Micro-nanostructures
Changyoon JEONG, Young-Bin PARK (Ulsan National Institute of Science and Technology)
B-19 Development of Hybrid Molding with Continuous and Discontinuous Fiber Reinforced Composites using Stitching Technology
Asami Nakaio, Xuanyu Sun(Gifu University) Masaki Ohishi(Satoh Machinery Works Co., Ltd.)
18:30~20:30 Banquet at Room 600 (6F)
Program : Oral Session ⅢDecember 6 (Friday) Room 301 (3F)Time ID Title Chairs, Authors
9:00~9:10Opening CeremonyWelcoming Address by Prof. J. I. Song(President of the KSCM)
9:10~9:50Plenary Speech Chairman: Joong Hee Lee(Jeonbuk National University)Speaker : Prof. Jinsong Leng(Harbin Institute of Technology)Title : Smart active composites and 4D printing technologies
9:50~10:30Plenary Speech Chairman: Joong Hee Lee(Jeonbuk National University)Speaker : Prof. Koichi Goda(Yamaguchi University)Title : Markov Process Modeling for Strength Estimation of Fibrous Composites
10:30~10:40 Coffee break
December 6 (Friday) Oral Session III Room 601 (6F)Sensing and health monitoring Chairman: Jung-Ryul LEE(Korea Advanced Institute of Science and Technology)
Ning HU(Hebei University of Technology)
10:40~12:10
C-01Condition-based Structural Health Monitoring Using Electromechanical Behaviors Of Carbon Fibers And Corresponding Analogous Equivalent Circuit Models
Hyung Doh ROH, Young-Bin PARK (Ulsan National Institute of Science and Technology)
C-02 Flow-Front Detection Of Impregnation Process Of VaRTM By Optical Fiber Distribution Sensor Hideo AKISAWA, Tatsuro KOSAKA(Kochi university of technology)
C-03 Acoustic Emission Simulation Using Pulse Laser-induced Wave With Considering Arrival Time For Quantification
Jun-Min LEE, Yunshil CHOI, Jung-Ryul LEE (Korea Advanced Institute of Science and Technology)
C-04 Optical Loss Prediction Which Occurred By Local Bending Of The Fresnel-based Optical Fiber Sensor Genko FUJIOKA, Tatsuro KOSAKA(Kochi University of Technology)
C-05 Flexible, Ultra-thin Skin Sensor For Human-motion Detection And Health Monitoring Imtisal AKHTAR, Seung-Hwan CHANG(Chung-Ang University)
C-06 Fabrication Of Bagel-like Graphene Aerogels And Its Application In Pressure Sensors
Zongheng LI, Huiming NING(Chongqing University), Ning HU(Hebei University of Technology)
12:10~13:10 Lunch Break, Room 600 (6F)
13:10~13:50Plenary Speech Chairman: Heoung-Jae CHUN(Yonsei University)Speaker : Prof. Jang-Kyo Kim(Hong Kong University of Science and Technology)Title : Graphene/polymer nanocomposites for flexible wearable sensors
13:50~14:10 JEC WORLD (ASIA)14:10~14:20 Coffee break
Structural composites / Testing and material characterization I Chairman: Jin-Hwe KWEON(Gyeongsang National University)Toshio OGASAWARA(Tokyo University of Agriculture and Technology)
14:20~15:50
C-07 Effect Of GFRP Coating On Low Cycle Fatigue Properties Of Al Alloys Nohjun MYUNG, Nak-Sam CHOI(Hanyang University)
C-08 Compressive Fracture Observation Of Thin-ply CFRP Laminates Using A High-Speed Camera
Kota TAKAMOTO, Sota OSHIMA, Toshio OGASAWARA(Tokyo University of Agriculture and Technology), Kazuyuki AOKI, Shigekazu UCHIYAMA(SUBARU)
C-09 Failure Analysis Of Scarf Repaired Composite Laminates Subjected To Bending Load Using Cohesive Elements Viet-Hoai TRUONG, Jin-Hwe KWEON(Gyeongsang National University)
C-10 Delamination Of Angle-ply Laminate Composites Under Open Loading Using Cohesive Zone Method
Van-Tho Hoang, Viet-Hoai TRUONG, Young-Woo NAM, Jin-Hwe KWEON (Gyeongsang National University)
C-11 In-situ Observation Of Microscopic Failure Process In Adhesively Bonded CFRP Joints Under Mixed-mode Loading
Tomoisa MIKAMI, Sota OSHIMA, Toshio OGASAWARA (Tokyo University of agriculture and Technology)
C-12 Mixed Mode I/II Delamination Study On Asymmetrical Stacking Sequence Of Multidirectional CFRP Laminates
MUHAMAD FAUZI ABD RASED, SUNG HO YOON (Kumoh National Institute of Technology)
15:50~16:20 Poster Session Room 301 Lobby (3F) & Coffee break
Structural composites / Testing and material characterization II Chairman: Jinho CHOI(Gyeongsang National University)Gen SASAKI(Hiroshima University)
16:20~18:05
C-13 Tribology Properties Of C/C Composite Materials With Cellulose Nano Fibre Against OFC Rotor Properties
Yoshihito OZAWA, Takumi OZAWA(Fukushima University), Tokio KIKUCHI(Fukushima Technology Centre)
C-14 A Study On Single-lap Joint Applied I-fiber Stitching Process Hyungwoo SIM, Joongtak BACK, Jinho CHOI(Gyeongsang National University)
C-15 Joule Heating Behavior Of CFRP Laminates Exposed To Lightning Current Under Conduction Testing
Shintaro KAMIYAMA(Tokyo University of Agriculture and Technology), Yoshiyasu HIRANO, Takao OKADA(Japan Aerospace Exploration Agency(JAXA)), Takeo SONEHARA(Shoden Corporation), Toshio OGASAWARA(Tokyo University of Agriculture and Technology)
C-16 Characteristics Of Tungsten Materials By Sintering Temperature And Titanium Content
Kwangmo PARK, Sugio Kenjiro, Sasaki Gen(Hiroshima University), Sangpill Lee(Dongeui University)
C-17 Preparation Of Almina Short Fiber Dispersed Aluminum Alloy Composites With Functional Gradient Structure
Shinji WATANABE, Kenjiro SUGIO, Yongbum CHOI, Gen SASAKI (Hiroshima University)
C-18 Microstructural Characteristics Of Commercial Carbon Fibers Depending On Materials & Processing Conditions
Kap-Seung YANG, Yoong Ahm KIM, Doo Won KIM(Chonnam National University), Dae Ho KIM(KIST), Sung Ryong KIM, Yun Hyuk Bang (Korea Institute of Carbon Convergence Technology)
C-19 Characteristics Of The Carbon Nanofibre Dispersed Copper Composites Prepared By Spark Plasma Sintering
Koyo FUJIMURA, Kenjiro SUGIO, Gen SASAKI, Yongbum CHOI (Hiroshima University)
18:30~20:30 Banquet at Room 600 (6F)
8 | The 12th Korea-Japan Joint Symposium on Composite Materials
9 The 1st Korea-China-Japan Joint Symposium on Composite Materials |
Program : Poster SessionDecember 6 (Friday) Poster Session Room 301 Lobby(3F)Time ID Title Chairs, Authors
PosterChairman: Dukhyun CHOI(Kyung Hee University)
Rongjie YANG(Beijing Institute of Technology)Yongbum CHOI(Hiroshima University)
10:30~18:00
P-01 Development Of Manufacturing Process Of Porous AlN Reinforced Fe Matrix Composite
Yusuke SETO, Yongbum CHOI, Kazuhiro MATSUGI, Kenjiro SUGIO (Hiroshima University)
P-02 Study on the Mechanical Properties Change of Long Carbon Fiber Reinforced Thermoplastic According to Polymer Types
Jeong U ROH(Gumi Electronics & Information Technology Research Institute)Joong Seob Guk(Seung Woo.Co.Ltd), Sung Eun Park(Gumi Electronics & Information Technology Research Institute), Jin Gon Kim, Hyun Young Lee(Seung Woo.Co.Ltd)
P-03 Study Of Discrepancy In Mechanical Properties Of Carbon Fiber Composites Owing To Incorporation Of Microspheres
Naga Kumar CHITKUR, Prabhakar M.N., Jung Il SONG (Changwon national university)
P-04 Combustion Analysis Of Composite Materials Using Fire Dynamics Simulator Yoon Hee PARK, Nam Kyeun KIM, Jung Il SONG (Changwon national university)
P-05 A Study On Parameter Optimization And Strength Analysis For 3D Weave Preform Application
Geontae PARK, Dong Woo LEE(Changwon national university), Joonhyung BYUN(KIMS), Jung Il SONG(Changwon national university)
P-06 The Effect Of Seaweed On Mechanical Properties Of Jute Fiber/Vinyl Ester Composites
Jaecheol KIM, Dong Woo LEE, Chang Uk KIM, Jung Il SONG (Changwon national university)
P-07 Evaluation Of Joule Heating Method Used In Carbon Composite Printer Jang-Hyeon LYU, Ho-Jin KIM, Soo-Hong MIN, Seung-Gi KIM(Seoul National University), Jeong-Beom IHN(Boeing), Sung-Hoon AHN(Seoul National University)
P-08 Effect Of Eco Flame Retardant Additives On Flammable Resin Composites PRABHAKAR M.N., Jung Il SONG(Changwon national university)
P-09 Next Generation Novel 3D Networked Inorganic-Organic Naphthalene Polyamic Acid Nanofillers In Vinylester Resin For Higher Flame Retardancy Ravi kumar CHEEDARALA, Jung Il SONG(Changwon national university)
P-10 Bamboo Paper/vinyl Ester Fiber Composites: Flame Retardancy Properties Venkata Chalapathi KADAPA, Prabhakar M. N, Jung Il SONG (Changwon national university)
P-11 Fabrication Of Flexible Cobalt Zinc Batteries With High Energy Density And Cycling Performance
Thanh Tuan NGUYEN, Jayaraman BALAMURUGAN, Dinh Chuong NGUYEN, Nam Hoon KIM, Joong Hee LEE(Jeonbuk National University)
P-12 Neutral Beam Based Surface Treatment And Its Effect On Triboelectric Behavior Wook KIM, Dukhyun CHOI(Kyung Hee University)
P-13 Auto Switching Mechanical Frequency Regulator For Countinuous Scavenging Energy From Triboelectric Nanogenerator
Khanh Duy PHAM, Nghia Dinh HUYNH, Hakjeong KIM(Kyung Hee University), Divij BHATIA(Korea Advanced Institute of Science and Technology), Dukhuyn CHOI(Kyung Hee University)
P-14 Hierarchical Mn-MoS2 Nanostructure Grown On Carbon Cloth A High- Performance Positive Electrode For Flexible Supercapacitor
Uday Narayan PAN, Tolendra KSHETRI, Dasu Ram PAUDEL, Van Hien HOA, Nam Hoon KIM, Joong Hee LEE(Jeonbuk National University)
P-15 Flame Retardant And Smoke Suppression Mechanism Of EP/Li-Ph-POSS Nanocomposites
Xinming YE, Wenchao ZHANG, Dinghua LI, Rongjie YANG (Beijing Institute of Technology)
P-16 Effect Of Copper Oxide/ Cuprous Oxide-fluoride Composite On Aluminum Ignition Performance And Catalytic Decomposition Of Ammonium Perchlorate
Fei XIAO, Ding-Hua LI, Jian-Min LI, Rong-Jie YANG (Beijing Institute of Technology)
P-17 Manufacturing Process Of Graphene Reinforced Metal Matrix Composite With High Volume Rate Of Graphene
Yosuke DOBASHI, YongBum CHOI, Kazuhiro MATSUGI, Gen SASAKI (Hiroshima University)
P-18 Comparative Study On Wear Resistance Of Epoxy-polyester Powder Coating Filled With Fumed And Plasma-prepared Spherical Aluminum Nanoparticles
HAOSHENG WANG (Institute of Process Engineering, Chinese Academy of Sciences)
P-19 Thermal Conductivity Of Silicone Rubber Composites With 3D Frameworks Of Boron Nitride And Graphene Yang XUE(institute of Process Engineering, Chinese Academy of Sciences)
P-20 Modulating The Magnetic And Microwave Absorption Performance Of Dual-doped Graphene Through Doping Sequence
Le QUAN, Haotian LU, Diana ESTEVEZ, Yunfei WANG, Yuhan LI, Huan WANG, Faxiang QIN, Huaxin PENG(Zhejiang University)
P-21 Wire-based Triboelectric Resonator For A Self-Powered Crack Monitoring System
Jiseop YU, Yeonseok JUNG, Hee Jae HWANG,Divij BHATIA, Dukhyun CHOI (Kyung Hee University)
P-22 Comb-structured Triboelectric Nanogenerator For Human Motion Sensing YEONSEOK JUNG, HEE JAE HWANG, DUKHYUN CHOI(Kyung Hee University)
P-23 Brief Review Of Surface Treatment For Bonding Of Thermosetting Composites Rene ROY, Seong-Min PARK, Jin-Hwe KWEON, Youngwoo NAM (Gyeongsang National University)
P-24 Magnetic Force Driven Sustainable Triboelectric Nanogenerator Hakjeong KIM, Duy Khanh PHAM, Dinh Nghia HUYNH, Dahoon AHN, Dukhyun CHOI(KyunghHee University)
P-25 Mechanistic Insights Into The Synthesis Of Fully Condensed Polyhedral Octaphenylsilsesquioxane
Zhaolu QIN, Rongjie YANG, Wenchao Zhang, Dinghua Li, Qingjie Jiao (Beijing Institute of Technology)
P-26 Effect Of Graphene Oxide Inclusion Into Vitrimers On Covalent Adaptable Networks: Molecular Dynamics Study
Chanwook PARK, Jiwon JUNG, Taehoon PARK, Gun Jin YUN (Seoul National University)
P-27 Mechanical Properties of Sandwich Composites Using Needle Punch Technique Kaito Orihara, Akio Ohtani(Kyoto Institute of Technology)
MEMO
10 | The 12th Korea-Japan Joint Symposium on Composite Materials
11 The 1st Korea-China-Japan Joint Symposium on Composite Materials |
MEMO
RegistrationThis registration fee includes symposium proceedings (on USB flash drive), technical tour, welcome reception, banquet, and Conference tour.
On-line registration by
November 13, 2019
300 USD / 350,000 KRW (Full delegate)
200 USD / 250,000 KRW (Student)
On-site registration
300 USD (Full delegate) and 200 USD (Student)
Credit Cards: Korean Won (KRW) by applying the exchange rate of registration day.
Cash: USD or Korean Won (KRW) by applying the exchange rate of registration day
TransportationInternational airport nearby CECO is Gimhae International Airport (PUS). Direct flights from 14 cities in
China and 9 cities in Japan including Tokyo Narita (NRT) and Beijing (PEK) to PUS are available.
International participants who enter through Incheon International Airport (ICN) and Gimpo International
Airport (GMP) should take high-speed train, express bus or domestic flight to PUS.
Airport Limousine from PUS to CECO runs every 15 to 20 minutes.
ICN/GMPSeoul stationSeoul bus terminal
PUSChangwon central station/Chanwon stationChangwon bus terminal
Gimhae International Airport (PUS)
CECO ↔ PUS : 40 min (airport limousine runs every 15-20 min)
ICN ↔ PUSGMP ↔ PUS
CECO ↔ Changwon bus terminal (5-10 min by car)CECO ↔ Changwon station (10-15 min by car)
Seoul ↔ Changwon (4 hr)Daejoen/kwangju ↔ Changwon (3 hr)Taegu ↔ Changwon (2 hr)Pusan ↔ Changwon (1 hr)CECO ↔ Changwon bus terminal (5-10 min by car)
Seoul ↔ Changwon (2 hr 40 min)
12 | The 12th Korea-Japan Joint Symposium on Composite Materials