Post on 29-Apr-2019
transcript
THE NOOR OUARZAZATE SOLAR
COMPLEX
Noor Solar Power Station – with a total area of 3000 Ha and a total capacity of 580
MW
OWNER MASEN
OWNER’S ENGINEER
ACWA
CONSTRUCTION SEPCO III
DURATION 2016 – 2017
APPLICATION Industry
MISSION
As part of the construction of the NOOR (II & III) Solar Power Station of Ouarzazate, AMITECH MAROC’s
mission is the supply and installation of GRP pipes and fittings for the conveyance and distribution of waste
water from the treatment plant to the storage tanks.
Concentrated solar power technology using parabolic troughs and an innovative thermal storage system are
used to store thermal power accumulated.
The GRP pipes used for this project have a total length of 3,5 Km, nominal diameters from 50 mm up to 600
mm and a stiffness of 5000 N/m².
CASE
STUDY
WATER TREATMENT PLANT – PUMP AREA
FITTINGS Tee, Elbow, Reducer, Flange
TRANSPORTED MEDIUM Water
PIPE TYPE Biaxial
INSTALLATION TYPE Buried & Above ground
STANDARDS AWWA C950 ; AWWA M45 ASTM D3517
RESIN TYPE EPOXY KRF-1001
WHY OUR PRODUCT ? Competitive ; Resistance to corrosion and abrasion ; Light weight ; Quick setup
AMITECH’S MISSION Supply & Installation
PROJECT INFORMATIONS
Water treatment plant producing demineralized water
which is necessary for the production of steam and
cleaning mirrors
Installation details
TOTAL LENGTH 300 ml
DIAMETER DN From 100 to 350 mm
PRESSURE PN 10 bars
STIFFNESS SN 5000 N/m²
JOINT TYPES Butt Wrap
CCW SYSTEM
CASE
STUDY
TRANSPORTED MEDIUM Water
PIPE TYPE Biaxial
INSTALLATION TYPE Above ground
STANDARDS AWWA C950 ; AWWA M45 ASTM D3517
RESIN TYPE EPOXY KRF-1001
WHY OUR PRODUCT ? Competitive ; Resistance to corrosion and abrasion ; Light weight ; Quick setup
AMITECH’S MISSION Supply & Installation
PROJECT INFORMATIONS
Water distribution system from storage tank to power
block
Pipe Details – Material
TOTAL LENGTH 50 ml
DIAMETER DN From 50 to 200 mm
PRESSURE PN 10 bars
STIFFNESS SN 5000 N/m²
JOINT TYPES Butt Wrap
FITTINGS 16 Tees, 27 Elbows, 6 Reducer, 41 Flanges
CASE
STUDY
PIPE INSTALLATION
TRANSPORTED MEDIUM Water
PIPE TYPE Biaxial
INSTALLATION TYPE Buried
STANDARDS AWWA C950 ; AWWA M45 ASTM D3517
RESIN TYPE EPOXY KRF-1001
WHY OUR PRODUCT ? Competitive ; Resistance to corrosion and abrasion ; Light weight ; Quick setup
AMITECH’S MISSION Supply & Installation
PROJECT INFORMATIONS
Ensure the transport and distribution of wastewater
from the treatment plant to the storage tanks
Pipe Details – Material
TOTAL LENGTH 2,2 km (DN 150) 1 km (DN 100)
DIAMETER DN 100 & 150 mm
PRESSURE PN 16 bars
STIFFNESS SN 5000 N/m²
JOINT TYPES Butt Wrap
FITTINGS Tee, Elbow, Reducer, Flange