Post on 03-Sep-2018
transcript
Dozer Blades
WWW.GROUSER.COM
The World’s Leading Manufactur er
of Fr ont MountedDozer Blades
for Agricultur e Tractors
WWW.GROUSER.COM2 WWW.GROUSER.COM
FH-400 Front 3-Point HitchFor MFD, 2WD & Tracked Tractors From 100hp-325hp
• All FH-400 3-Points Are Cat III Narrow• Torsional Push Force Is Transferred To The
Tractor Frame And Draw Bar Through An Under Axle Frame
• Lower Arms Are Claw Quick At tach• Hitch Comes Complete With All Mounting
Hardware, Hoses And Hydraulic Cylinders• Double Acting Lif t Cylinders• Only Grouser Three Points Have a Lif t Range of
Minus 6” to Plus 41”
FH-400 – Features
• 15,000 Pound Lif t Capacity At The Claws• Lif t Range - 47”• Lif t Cylinder Size – 4” X 12” With 2” Rods• Front SCV Outlets (1 or 2 Sets) (Optional)• Ground Clearance - 15” (Typically)
FH-400 – Specifications
Pickett EquipmentBean Harvester
FH-400 Front 3-Point Hitch Kneeler
WWW.GROUSER.COMWWW.GROUSER.COM 800-747-6182 3
FH-400 Front 3-Point HitchFor MFD, 2WD & Tracked Tractors From 100hp-325hp
For 4WD & Tracked Tractors From 275hp-500hp
The FH-400 Kneeler 3-Point was developed for individuals that wanted to put 3-Point implements on the front of their ar ticulating tractors. The front will “kneel” out of the way for routine service on the tractor.
Ike’s Welding Pickle Harvester
For MFD, 2WD & Tracked Tractors From 100hp-325hp
Ike’s Welding Pickle Harvester
800-747-6182800-747-6182
FH-400 Front 3-Point Hitch Kneeler
WWW.GROUSER.COM4 WWW.GROUSER.COM
2200 Dozer BladeFor MFD, 2WD & Tracked Tractors From 100hp-340hp
Application: Agricultural / Light Industrial
• Angle Cylinders – 4” X 20” With 2” Rods• Tilt Cylinder – 4” X 8” With 2” Rods• Lif t Cylinder – 4” X 12” With 2” Rods• Grade 50 Rolled Moldboard – 3/16” Thick X 54” Tall• Cutting Edge – 5/8” X 6” Reversible• Angle – 30 degrees• Tilt – 13 degrees• Blade Widths 9’ To 16’• Lif t Height 36” (Typically)
2200 Dozer Blade – Specifications
• Lif t Height 36”• Under Tractor Clearance – 15” (Typically)• Includes FH-400 Front 3-Point Hitch• All Hoses And Hardware Provided• Quick Connect & Disconnect At The Blade• Adjustable Skid Shoes – Standard• Cutting Edge Is Mounted Flush With Moldboard• Quick At tach - The Quick At tach Is A Major
Convenience Feature. It Allows The Blade To Be Mounted And Dismounted Quickly When Not Needed, Which Is Important To Reduce Front-end Weight And Visibility For Normal Field Use.
2200 Dozer Blade – Features
WWW.GROUSER.COMWWW.GROUSER.COM 800-747-6182 5
2200 Dozer BladeFor MFD, 2WD & Tracked Tractors From 100hp-340hp
Application: Agricultural / Light Industrial
• Angle Cylinders – 4” X 20” With 2” Rods• Tilt Cylinder – 4” X 8” With 2” Rods• Lif t Cylinder – 4” X 12” With 2” Rods• Grade 50 Rolled Moldboard – 3/16” Thick X 54” Tall• Cutting Edge – 5/8” X 6” Reversible• Angle – 30 degrees• Tilt – 13 degrees• Blade Widths 9’ To 16’• Lif t Height 36” (Typically)
2200 Dozer Blade – Specifications
WWW.GROUSER.COM6 WWW.GROUSER.COM
4200 Dozer BladeFor 4WD & Tracked Tractors From 275hp-500hp
Application: Agricultural
• 48” Or 66” (W/ Top Extension) Blade• 3/16” Rolled Moldboard - Grade 50• Replaceable 1/2” Walled Bushings• Quick At tach – Standard• Cutting Edge 5/8” X 6” Reversible• Nitro Steel® Cylinder Rods• 4” X 20” Lif t Cylinder W/ 2” Pins• Lif t Height – 46+”• Angle – 30 degree• Tilt – 10 degree• Under Tractor Clearance - 19” (Typically)
4200 Dozer Blade – Specifications
Blade Quick Attach
WWW.GROUSER.COMWWW.GROUSER.COM 800-747-6182 7
4200 Dozer BladeFor 4WD & Tracked Tractors From 275hp-500hp
Application: Agricultural
Blade Quick Attach
800-747-6182800-747-6182
4200 Dozer Blade4200 Dozer BladeFor 4WD & Tracked Tractors From 275hp-500hp
Application: Agricultural
• High Lif t – Standard• Blade Is 48” Or 66” (W/ Top Extension) Tall
With Rolled Mold Board & Box Construction• Single Lever Quick At tach System – Standard• Exclusive Vertical Lif t Design• Blade Widths 12’-20’• Hydra-Mechanical Angle System• Adjustable Skid Shoes – Standard• Ground Clearance Is Unequaled• Quick At tach - The Quick At tach Is A Major
Convenience Feature. It Allows The Blade To Be Mounted And Dismounted Quickly When Not Needed, Which Is Important To Reduce Front-end Weight And Visibility For Normal Field Use.
4200 Dozer Blade – Features
WWW.GROUSER.COM8 WWW.GROUSER.COM
6200 Dozer BladeFor Wide Frame 4WD & Tracked Tractors From 430hp-650hp
Application: Agricultural
6200 Dozer Blade – Specifications
6200 Dozer Blade – Features
6200 Dozer Blade6200 Dozer BladeFor Wide Frame 4WD & Tracked Tractors From 430hp-650hp
WWW.GROUSER.COMWWW.GROUSER.COM
• Designed For Agricultural Applications• High Lif t – Standard• Blade Is 48” Or 66” (w/ Top Extension) Tall With
Rolled Mold Board & Box Construction• Single Lever Quick At tach System – Standard• Exclusive Vertical Lif t Design• Blade Widths 12’-20’• Hydra-Mechanical Angle System• Adjustable Skid Shoes – Standard• Ground Clearance Is Unequaled• Power Pitch Top Arms – Optional
• 48” Or 66” (W/ Top Extension) Blade• 3/16” Rolled Moldboard - Grade 50• Quick At tach – Standard• Cutting Edge ¾” X 8” Reversible• 4” X 20” Lif t Cylinder W/ 2” Pins• Lif t Height – 46+” (Typically)• Angle – 28 Degree• Tilt – 10 Degree• Under Tractor Clearance - 19” (Typically)• Quick At tach - The Quick At tach Is A Major
Convenience Feature. It Allows The Blade To Be Mounted And Dismounted Quickly When Not Needed, Which Is Important To Reduce Front-end Weight And Visibility For Normal Field Use.
WWW.GROUSER.COMWWW.GROUSER.COM 800-747-6182 9
4500 & 6500 Dozer BladeFor 4WD & Tracked Tractors From 375hp-650hp
Application: Construction / Earth Moving
4500 / 6500Dozer Blade – Specifications
4500 / 6500 Dozer Blade – Features
4500 & 6500 Dozer Blade4500 & 6500 Dozer BladeFor 4WD & Tracked Tractors From 375hp-650hp
Application:
4500 / 6500 Dozer Blade – Features
4500 / 6500Dozer Blade – Specifications
• Designed For Industrial Applications• High Lif t – Standard• Blade Is 48” Or 66” (w/ Top Extension) Tall
With Rolled Mold Board & Box Construction• Single Lever Quick At tach System – Standard• Exclusive Vertical Lif t Design• Blade Widths 12’-20’• Hydra-Mechanical Angle System• Adjustable Skid Shoes – Standard• Ground Clearance Is Unequaled• Power Pitch Top Arms – Optional• Abraision Or Impact Resistant Moldboards• Heavy Duty Replaceable Cutting Edges• Power Angle And Power Tilt
4500 / 6500Dozer Blade – Specifications4500 / 6500Dozer Blade – Specifications
• Hydra-Mechanical Angle System• Adjustable Skid Shoes – Standard• Ground Clearance Is Unequaled• Power Pitch Top Arms – Optional• Abraision Or Impact Resistant Moldboards• Heavy Duty Replaceable Cutting Edges• Power Angle And Power Tilt
• 48” Or 66” (W/ Top Extension) Blade• 3/16” Rolled Moldboard - Lined 3/8” AR Plate• Quick At tach – Standard• Cutting Edge ¾” X 8” Reversible• 5” X 20” Lif t Cylinder W/ 2” Pins• Lif t Height – 46+” (Typically)• Angle – 30 degree• Tilt – 10 degree• Under Tractor Clearance - 19” (Typically)
WWW.GROUSER.COM10 WWW.GROUSER.COM
Blade Attachments & Options
Top Extension - 18” or 30”Silage Box End Plate Box End Cap
Box End Plate
Brush Guard
Hinge
1’ or 2’ End Extensions
Root Rake
Ripper Rock Digger
Serrated Cutting Edge
Push Plate
Power Pitch Blade Control
Joystick
Grouser Products offers a wide varity of blade attachments. Besides the options and at tachments shown here there are other at tachments available. If you have an at tachment that you feel would be useful in your application let us know what you want. Our engineering depar tment will work with you on the design. From Idea to Development to Production Grouser Products will work with you each step of the way.
Power Pitch
Pushin Cushin
OptionalTop Arms
Oil Exploration
WWW.GROUSER.COMWWW.GROUSER.COM 800-747-6182 11
Custom ProjectsCustom ProjectsCustom Projects
Grouser Products would like to congratulate the South Pole
Traverse Team on their successful journey to South Pole Station. The Team parked at the South Pole on Friday December 23rd, 2005 at 2:58pm. They delivered heavy equipment and snow removal equipment with a total weight that would have required approximately 11 LC-130 flights. Grouser Products is proud to have been a part of this successful project. To Learn More Visit http://www.usap.gov/
South Pole
Oil Exploration
Heavy Ripping Scraper Pushing, Ripping & Leveling
Pulp Mills
Cannery Silage Piling
Export
Oil Exploration