Post on 06-Feb-2021
transcript
Pro
du
ct Sp
ecifica
tion
sM A S S S P E C T R O M E T R Y
Thermo Scientific ELEMENT GD High resolution glow discharge mass spectrometer
IntroductionThe fast flow source design of the ELEMENT™ GD mass spectrometer speeds up analytical workflows in the production of valuable metals and alloys, providing a new user experience and dramatically improves laboratory efficiency. With sample turn-around times of ~10 min a close production control is made possible even when QC limits are set at the ppb level.
BasicsThe ELEMENT GD fast flow source concept provides• High sensitivity: shorter analysis times
• High sputter rate: less pre-sputter time, less sample preparation
• Simple vacuum requirements speeds up pumping times
• Standard RSF concept for semi-quantitative analysis
The mass spectrometer features• High resolution: interference removal easy
even for complex matrices like Ni alloys
• High scan speed: short scan times, excellent depth resolution
• High mass stability: no need to acquire entire peak; cutting analysis time to ~ half
• Fast switching between resolutions: no drawback using multiple resolutions for analysis
The Thermo Scientific ELEMENT GD has been developed as a combination of a fast flow glow discharge source with a high resolution mass spectrometer.
This technology enables advanced high performance GD-MS analysis combined with the industry accepted data integrity of this technique.
2 Software for a high level of transparancyThe software package is optimized for the needs of the routine analyst, providing ease of use for basic operation as well as flexibility for advanced operation.
The ELEMENT software suite controls and monitors all instrument functions for GD-MS analysis and provides all necessary features for data evaluation. Real time display of mass spectra, time resolved data, calibration curves and comprehensive reports guarantee a high level of transparency and therefore easily traceable results. Full and flexible support for LIMS connectivity ensures convenient, automatic and safe data management.
The ELEMENT software package offers full quantitative analysis using Relative Sensitivity Factors (RSF) obtained from standard materials or semi-quantitative analysis using Ion Beam Ratios (IBR). Since the ELEMENT GD detection system is capable of measuring traces and the matrix within one analysis, the ratio between the analyte and the matrix is used for quantification.
Software features• Windows® 7 operating system
• LIMSconnectivity
• Traceabledatamanagement
• Simplesoftwareforroutinework&fullflexibilityforresearchwork
• Automaticdetectorcrosscalibration
• Automaticmassdriftcorrection
Intuitive method creation
Real time display of calibration curves, spectra and results
Glow Discharge Ion Source software control
3
ELEMENT GD footprint and dimensions in cm
Specifications and installation requirementsThe mass analyzer of the ELEMENT GD is proven in more than 600 Thermo Scientific ELEMENT high resolution ICP-MS installations worldwide.
Ion Source Parts Two basic starter kits: •Highpuritykit(graphitesourceparts,cleaningwithmineralacid) •Mediumpurity(stainlesssteelsourceparts,disposables/mechanicalcleaning)
Ion Source GD power supply: •DCvoltage:adjustable;max.1,400V,workingrangetypical400-1,200V •Current:adjustable;max.200mA,typical30-50mA •PulsedDCoptionwith10to150µspulseduration •Peltiercoolingofthesample Extraction lens: Graphite plug-in extraction lens Interface:Plug-in cone Slide valve: Teflon coated, lubrification possible if necessary Pump: Oil free pump; pump down time to operation < 10 s
Sensitivity > 1 x 1010 cps, (1.6 x 10-9A)forcopper(peakheight,totalioncurrent) inmediumresolution(R≥4000)
Darknoise ≤0.5cps
Dynamic Detection range > 1012 linear with automatic cross calibration
Minimumintegrationtimes Countingmode:0.1ms;Analogmode:1ms,Faradaymode:1ms
Massresolution 3fixedresolutions:≥300;≥4,000;≥10,000
Resolution switching times < 1 s
Massstability 25ppm/8hour
Scanspeed(magnetic) <150msfromm/z7to238to7
Scanspeed(electric) 1ms/jump,independentofmassrange
Power 3-phase,230/400V±10%,50/60Hzfused32Aperphase
Powerconsumption max.8kVA
Temperature 18-24°C(64-75°F)
Humidity 50-60%,non-condensing,non-corrosive
Coolingwater ~200L/h Temperature10-20°C 4-6bar(43-65psi)
Gas Dischargegas:1L/minArgon5.0(orhigher); Purgegas:5L/minArgon4.6
Gaspressure 8-10bar(116-145psi)
Pumpexhaust 1x25mm,1L/min
Electronicexhaust 1x150mm,400m3/h
Electromagneticfields max.acceptablefieldamplitude(AC)foranyfrequencyis5x10-6 T
Threeexhaustcircuits •Backuppumpexhaust:1L/min,warmairfromroughingpump •Pumpexhaustfromscrollpump:onaverage1L/min,duringsamplepump down5Lin10sec
Software platform Microsoft® Windows 7 operating system for instrument control PC
Dischargegasinstallation Steelcapillaryfordischargegas;1/8inchasoutletofinstrument
Purge gas 6 mm tubing supplied
Weight Basicunit723kg
Pro
du
ct Sp
ecifica
tion
s
PS30239_E 08/12G
Africa-Other +27 11 570 1840Australia +61 3 9757 4300Austria +43 1 333 50 34 0Belgium +32 53 73 42 41Canada +1 800 530 8447China +86 10 8419 3588Denmark +45 70 23 62 60
Europe-Other +43 1 333 50 34 0Finland/Norway/Sweden +46 8 556 468 00France +33 1 60 92 48 00Germany +49 6103 408 1014India +91 22 6742 9434Italy +39 02 950 591
Japan +81 45 453 9100Latin America +1 561 688 8700Middle East +43 1 333 50 34 0Netherlands +31 76 579 55 55New Zealand +64 9 980 6700Russia/CIS +43 1 333 50 34 0South Africa +27 11 570 1840
Spain +34 914 845 965Switzerland +41 61 716 77 00UK +44 1442 233555USA +1 800 532 4752
www.thermoscientific.com/ElementGD© 2012 Thermo Fisher Scientific Inc. All rights reserved. Windows is a trademark of the Microsoft group of companies. ISO is a trademark of the International Standards Organisation. All other trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries. Specifications, terms and pricing are subject to change. Not all products are available in all countries. Please consult your local sales representative for details.
Thermo Fisher Scientific (Bremen) GmbH Management System Registered to SO 9001:2008
Complete characterization for metallurgy www.thermoscientific.com/metallurgy
Advanced WDXRFThermo Scientific ARL PERFORM’X
Glow Discharge MSThermo Scientific ELEMENT GD
Raman SpectroscopyThermo Scientific
DXR Raman Microscope
ICP-MSThermo Scientific ELEMENT 2,
ELEMENT XR and iCAP Q
Portable Elemental Analysis Thermo Scientific Niton Analyzer
Spark Source OESThermo Scientific ARL 4460