CATALOGUEof HOMOLOGATED BODY EQUIPMENTSfor ISUZU D-MAX

EN www.titanequipment.it

of HOMOLOGATED BODY ENENENENENENENEN

SINGLE 4x2-4x4SPACE 4x4CREW 4x4

ACCESSORIES

SINGLE4x2-4x4

PIC

K-U

P S

ING

LE 4

X2 - 4

X4

6

STEEL REAR TIPPER

PICK-UP SINGLE 4X2 - 4X4PICK-UP SINGLE 4X2 - 4X4PICK-UP SINGLE 4X2 - 4X4

APPROX WEIGHT: KG 390

COD.

M 155 025 004

EXTERNALS DIMENSIONS

2400 x 1830 mm

STEEL REAR TIPPER according to EC standard, treated with cataphoresis and powder painted, externals dimensions 2400 x 1830 mm, steel sub-frame and loading deck, sides and rear boards of anodized aluminium H. 400 mm, 2 winches, cab protection with perforated sheet and ladder rack, rear ladder rack, thermoplastic mudguards, rear pillars, electrohydraulic power pack with push bottom panel with cable inside cab, lights according to standard regulations, chromed telescopic cylinder, steel galvanized tool box, “Isuzu” homologated bumper with double tubular.

HOMOLOGATED.

ALUMINIUM THREE-WAY TIPPER

PIC

K-U

P S

ING

LE 4

X2 - 4

X4

7

PICK-UP SINGLE 4X2 - 4X4PICK-UP SINGLE 4X2 - 4X4

APPROX WEIGHT: KG 390

COD.

M 155 021 142

EXTERNALS DIMENSIONS

2400 x 1830 mm

ALUMINIUM THREE-WAY TIPPER according to EC standard, externals dimensions 2400 x 1830 mm, steel galvanised sub-frame, anodized aluminium side boards H. 340 mm, anodized aluminium rear board H. 400 mm, loading deck of aluminium staves, aluminium cab protection with ladder rack and rope stretching rings, galvanized handles and hinges, galvanized rear pillars, 4 integra-ted foldaway handles on the edge of platform (2+2), thermoplastic mudguards, electrohydraulic power pack with push bottom panel with cable inside cab, chromed telescopic cylinder, galvani-zed licence plate, “Isuzu” homologated bumper with double tubular.

HOMOLOGATED.

ALUMINIUM THREE-WAY TIPPER according to EC standard, externals dimensions 2400 x 1830 mm,

PIC

K-U

P S

ING

LE 4

X2 - 4

X4

8

STEEL REAR TIPPER and RETROCAB STORAGE BOX

PICK-UP SINGLE 4X2 - 4X4PICK-UP

APPROX WEIGHT: KG 400

COD.

M 155 025 005

EXTERNALS DIMENSIONS

1920 x 1830 mm+

Storage Box470x800x1800 mm

STEEL REAR TIPPER according to EC standard, treated with cataphoresis and powder painted, externals dimensions 1920 x 1830 mm, steel sub-frame and loading deck, sides and rear boards of anodized aluminium H. 400 mm,, 2 winches, cab protection with perforated sheet and ladder rack, rear ladder rack, thermoplastic mudguards, rear pillars, electrohydraulic power pack with push bottom panel with cable inside cab, lights according to standard regulations, chromed telescopic cylinder, “Isuzu” homologated bumper with double tubular.

RETROCAB STORAGE BOX ext. dim. 470x800x1800 mm of 2 mm width steel, painted with epoxy powder (RAL 9006), plastic internal mat, aluminium hinges, central shelf bracket, double ope-ning, locks euroinox.

HOMOLOGATED.

STEEL REAR TIPPER and RETROCAB STORAGE BOX

SINGLE 4X2 - 4X4PICK-UP SINGLE 4X2 - 4X4

STORAGE BOX 470x800x1800 mm

ALUMINIUM THREE-WAY TIPPERand RETROCAB STORAGE BOX

PIC

K-U

P S

ING

LE 4

X2 - 4

X4

9

PICK-UP SINGLE 4X2 - 4X4PICK-UP

APPROX WEIGHT: KG 390

COD.

M 155 021 161

EXTERNALS DIMENSIONS

1920 x 1830 mm+

Storage Box470x800x1800 mm

ALUMINIUM THREE-WAY TIPPER according to EC standard, externals dimensions 1920 x 1830 mm, steel galvanised sub-frame, anodized aluminium side boards H. 340 mm, rear anodized aluminium board H. 400 mm, loading deck of aluminium staves, aluminium cab protection with ladder rack and rope stretching rings, galvanized handles and hinges, galvanized rear pillars, 4 integrated foldaway handles on the edge of platform (2+2), thermoplastic mudguards, electro-hydraulic power pack with push bottom panel with cable inside cab, chromed telescopic cylinder, galvanized licence plate, “Isuzu” homologated bumper with double tubular.

RETROCAB STORAGE BOX ext. dim. 470x800x1800 mm of 2 mm width steel, painted with epoxy powder (RAL 9006), plastic internal mat, aluminium hinges, central shelf bracket, double ope-ning, locks euroinox.

HOMOLOGATED.

ALUMINIUM THREE-WAY TIPPER

SINGLE 4X2 - 4X4PICK-UP SINGLE 4X2 - 4X4

STORAGE BOX 470x800x1800 mm

PIC

K-U

P S

ING

LE 4

X2 - 4

X4

10

PICK-UP SINGLE 4X2 - 4X4PICK-UP SINGLE 4X2 - 4X4

DROPSIDE BODY WITH ALUMINIUM FLOOR

ALUMINIUM FLOOR

APPROX WEIGHT: KG 180

COD.

M 155 009 005

EXTERNALS DIMENSIONS

2400 x 1830 mm

ALUMINIUM DROPSIDE BODY, externals dimensions 2400 x 1830 mm, aluminium sub-frame, aluminium side and rear boards H. 300 mm, loading deck of ALUMINIUM STAVES, aluminium cab protection with ladder rack and rope stretching rings, 4 integrated foldaway handles on the edge of platform (2+2), predisposition for rear ladder rack, galvanized handles, thermoplastic mud-guards, galvanized licence plate, lights according to standard regulations, “Isuzu” homologated bumper with double tubular.

HOMOLOGATED.

MARINE PLYWOOD FLOOR

PIC

K-U

P S

ING

LE 4

X2 - 4

X4

11

PICK-UP SINGLE 4X2 - 4X4PICK-UP SINGLE 4X2 - 4X4

DROPSIDE BODY WITH MARINE PLYWOOD FLOOR

APPROX WEIGHT: KG 195

COD.

M 155 009 006

EXTERNALS DIMENSIONS

2400 x 1830 mm

ALUMINIUM DROPSIDE BODY, externals dimensions 2400 x 1830 mm, aluminium sub-frame, alu-minium side and rear boards H. 300 mm, MARINE PLYWOOD floor, aluminium cab protection with ladder rack and rope stretching rings, 4 integrated foldaway handles on the edge of platform (2+2), predisposition for rear ladder rack, galvanized handles, thermoplastic mudguards, galva-nized licence plate, lights according to standard regulations, “Isuzu” homologated bumper with double tubular.

HOMOLOGATED.

SPACE4x4

PIC

K-U

P S

PA

CE 4

X4

14

STEEL REAR TIPPER

PICK-UP SPACE 4X4PICK-UP SPACE 4X4

APPROX WEIGHT: KG 320

COD.

M 155 025 006

EXTERNALS DIMENSIONS

1920 x 1830 mm

STEEL REAR TIPPER according to EC standard, treated with cataphoresis and powder painted, externals dimensions 1920 x 1830 mm, steel sub-frame and loading deck, sides and rear boards of anodized aluminium H. 400 mm, 2 winches, cab protection with perforated sheet and ladder rack, rear ladder rack, thermoplastic mudguards, rear pillars, electrohydraulic power pack with push bottom panel with cable inside cab, lights according to standard regulations, chromed telescopic cylinder, steel galvanized tool box, “Isuzu” homologated bumper with double tubular.

HOMOLOGATED.

STEEL REAR TIPPER

ALUMINIUM THREE-WAY TIPPER

PIC

K-U

P S

PA

CE 4

X4

15

PICK-UP SPACE 4X4PICK-UP SPACE 4X4

APPROX WEIGHT: KG 310

COD.

M 155 021 143

EXTERNALS DIMENSIONS

1920 x 1830 mm

ALUMINIUM THREE-WAY TIPPER according to EC standard, externals dimensions 1920 x 1830 mm, steel galvanised sub-frame, anodized aluminium side boards H. 340 mm, anodized aluminium rear board H. 400 mm, loading deck of aluminium staves, aluminium cab protection with ladder rack and rope stretching rings, galvanized handles and hinges, galvanized rear pillars, 4 integra-ted foldaway handles on the edge of platform (2+2), thermoplastic mudguards, electrohydraulic power pack with control panel into the cab, chromed telescopic cylinder, galvanized licence plate, “Isuzu” homologated bumper with double tubular.

HOMOLOGATED.

ALUMINIUM THREE-WAY TIPPER

PIC

K-U

P S

PA

CE 4

X4

16

DROPSIDE BODY WITH ALUMINIUM FLOOR

PICK-UP SPACE 4X4PICK-UP SPACE 4X4

APPROX WEIGHT: KG 130

COD.

M 155 009 007

EXTERNALS DIMENSIONS

1920 x 1830 mm

ALUMINIUM DROPSIDE BODY, externals dimensions 1920 x 1830 mm, aluminium sub-frame, aluminium side and rear boards H. 300 mm, loading deck of ALUMINIUM STAVES, aluminium cab protection with ladder rack and rope stretching rings, 4 integrated foldaway handles on the edge of platform (2+2), predisposition for rear ladder rack, galvanized handles, thermoplastic mud-guards, galvanized licence plate, lights according to standard regulations, “Isuzu” homologated bumper with double tubular.

HOMOLOGATED.

ALUMINIUM FLOOR

DROPSIDE BODY WITH MARINE PLYWOOD FLOOR

PIC

K-U

P S

PA

CE 4

X4

17

PICK-UP SPACE 4X4PICK-UP SPACE 4X4

APPROX WEIGHT: KG 150

COD.

M 155 009 008

EXTERNALS DIMENSIONS

1920 x 1830 mm

ALUMINIUM DROPSIDE BODY, externals dimensions 1920 x 1830 mm, aluminium sub-frame, alu-minium side and rear boards H. 300 mm, MARINE PLYWOOD floor, aluminium cab protection with ladder rack and rope stretching rings, 4 integrated foldaway handles on the edge of platform (2+2), predisposition for rear ladder rack, galvanized handles, thermoplastic mudguards, galva-nized licence plate, lights according to standard regulations, “Isuzu” homologated bumper with double tubular.

HOMOLOGATED.

MARINE PLYWOOD FLOOR

CREW4x4

PIC

K-U

P C

REW

4X

4

20

STEEL REAR TIPPER

PICK-UP CREW 4X4CREW 4X4PICK-UP CREW 4X4

APPROX WEIGHT: KG 265

COD.

M 155 025 008

EXTERNALS DIMENSIONS

1600 x 1830 mm

STEEL REAR TIPPER according to EC standard, treated with cataphoresis and powder painted, externals dimensions 1600 x 1830 mm, steel sub-frame and loading deck, sides and rear boards of anodized aluminium H. 400 mm, cab protection with perforated sheet and ladder rack, rear ladder rack, thermoplastic mudguards, rear pillars, electrohydraulic power pack with push bottom panel with cable inside cab, lights according to standard regulations, chromed telescopic cylinder, steel galvanized tool box, “Isuzu” homologated bumper with double tubular.

HOMOLOGATED.

ALUMINIUM REAR TIPPER

PIC

K-U

P C

REW

4X

4

21

PICK-UP CREW 4X4PICK-UP CREW 4X4

APPROX WEIGHT: KG 260

COD.

M 155 025 009

EXTERNALS DIMENSIONS

1600 x 1830 mm

ALUMINIUM REAR TIPPER according to EC standard, externals dimensions 1600 x 1830 mm, steel galvanised sub-frame, anodized aluminium side boards H. 340 mm, anodized aluminium rear board H. 400 mm, loading deck of aluminium staves, aluminium cab protection with ladder rack and rope stretching rings, galvanized handles and hinges, galvanized rear pillars, 4 integrated foldaway handles on the edge of platform (2+2), thermoplastic mudguards, electrohydraulic power pack with push bottom panel with cable inside cab, chromed telescopic cylinder, galvani-zed licence plate, “Isuzu” homologated bumper with double tubular.

HOMOLOGATED.

ALUMINIUM REAR TIPPER

PIC

K-U

P C

REW

4X

4

22

DROPSIDE BODY WITH ALUMINIUM FLOOR

PICK-UP CREW 4X4PICK-UP CREW 4X4

APPROX WEIGHT: KG 115

COD.

M 155 009 009

EXTERNALS DIMENSIONS

1600 x 1830 mm

ALUMINIUM DROPSIDE BODY, externals dimensions 1600 x 1830 mm, aluminium sub-frame, aluminium side and rear boards H. 300 mm, loading deck of ALUMINIUM STAVES, aluminium cab protection with ladder rack and rope stretching rings, 4 integrated foldaway handles on the edge of platform (2+2), predisposition for rear ladder rack, galvanized handles, thermoplastic mud-guards, galvanized licence plate, lights according to standard regulations, “Isuzu” homologated bumper with double tubular.

HOMOLOGATED.

ALUMINIUM FLOOR

DROPSIDE BODY WITH MARINE PLYWOOD FLOOR

PIC

K-U

P C

REW

4X

4

23

PICK-UP SPACE 4X4PICK-UP SPACE 4X4

APPROX WEIGHT: KG 130

COD.

M 155 009 010

EXTERNALS DIMENSIONS

1600 x 1830 mm

ALUMINIUM DROPSIDE BODY, externals dimensions 1600 x 1830 mm, aluminium sub-frame, alu-minium side and rear boards H. 300 mm, MARINE PLYWOOD floor, aluminium cab protection with ladder rack and rope stretching rings, 4 integrated foldaway handles on the edge of platform (2+2), predisposition for rear ladder rack, galvanized handles, thermoplastic mudguards, galva-nized licence plate, lights according to standard regulations, “Isuzu” homologated bumper with double tubular.

HOMOLOGATED.

MARINE PLYWOOD FLOOR

ACCESSORIES

AC

CESSO

RIE

S

25

DESCRIPTION

ALUMINIUM PROTECTION for boards and ladder racks M 133 238 004

CLIMBING HANDLE M 133 238 001

CLIMBING LADDER M 533 238 003

OVERHEAD SIDE BOARDS H. 400 mm of ALUMINIUM M 141 149 920

OVERHEAD SIDE BOARDS H. 400 mm of GALVANIZED STEEL MESH M 141 149 919

PROTECTION RUBBER M 533 238 004

RETROCAB STORAGE BOX ext. dim. 470x800x1800 mm M 541 040 153

TOOL HOLDER M 133 238 002

UNIVERSAL REAR BOARD with double door H. 400 mm M 141 149 218

ACCESSORIES

WARRANTY CONDITIONS:

Guarantee has validity of 12 months. All reparations must be previously authorized by us.

Any warranty will be recognized in case of tampering and when it will not be respected

its procedure.

All warranties requests must be written and followed by copy of the registration card,

photos and repair estimate.

Claims related to hydraulic components (P.T.O., cylinders) must follow the below procedure:

• Purchase of part to replace at our warehouse dept.

• Forwarding to us of the replaced part (accompanied by related warranty card)

which will be sent to our supplier

• Acceptance or rejection of the guarantee by the supplier

• Application to the customer of the same decisions set by the supplier

www.titanequipment.it

Ed. EN 01/2012

Via Calcara, 26 - CEREA (VR) - ITALIA☎ +39 0442 328111

CONTACTS:SALES MANAGER ELISA CAPPELLARITel. +39 04 42 32 88 18 - Fax +39 04 42 32 88 04e-mail: elisa.cappellari@titanequipment.it

PRODUCTION MANAGER ENRICO PETTENETel. +39 04 42 32 88 90 - Fax +39 04 42 32 88 04e-mail: enrico.pettene@titanequipment.it