To insert your company logo From the Insert Menu Carderock Stone Select “Picture ... ·...

transcript

Carderock® Stone Tri-State Stone® &

Building Supply, Inc. quarriers of Carderock® Stone

www.carderock.com

8200 Seven Locks Road

Bethesda, MD 20817

301-365-2100

301-365-5524 (fax)

wprunka@hotmail.com

Corporate

To insert your company logo

on this slide

• From the Insert Menu

• Select “Picture”

• Locate your logo file

• Click OK

To resize the logo

• Click anywhere inside the

logo. The boxes that appear

outside the logo are known

as “resize handles.”

• Use these to resize the

object.

• If you hold down the shift key

before using the resize

handles, you will maintain

the proportions of the object

you wish to resize.

Carderock ® Drywall

• Ideal for dry and

semi-dry stack

retaining walls

• Approximately

3000 lbs. per pallet

• Gives rustic

appearance

Carderock ® Gardenwall

• Easy to stack, even

for the do-it- yourself

customer

• Quick and easy for

contractors

• Approximately

3000 lbs. per pallet

Carderock® Veneer

Stone • 4” - 6” veneer

• Ideal for houses,

fireplaces, or any

application that requires

a stone veneer

• Vertical, horizontal, &

transverse seams for

workability

• Beautiful color range

• Adaptable to numerous

installation styles and

Carderock® Premium

Snapped Veneer Stone • 4” - 6” snapped

veneer

• Ideal for roughly

squared or ashlar

application

• Minimal trimming or

shaping required

• 40 -45 square feet

per ton

Carderock® Sawn Ashlar

Veneer Stone • 4” - 6” bed depth,

sawn top & bottom

• Split and seam faces

• Sawn ends

• Stock 3.5”, 7.5”,

11.5” rises. Custom

rises available

• 40 -45 square feet

per ton

Carderock® Sawn Ashlar Veneer Installation

Carderock® Thin Veneer Stone

• Thin veneer - 1-1/2 - 2” thick ~ no footing required!

• Real stone - not artificial

• Ideal for any application that requires a thin veneer stone.

Carderock® Thin Veneer Installation

Carderocks TM

• Tumbled Carderock®

Stone - same unique color

• Applications include dry

stream beds, water

features, groundcover

Carderock® Chips

Landscape groundcover

Carderock® Flagging

Carderock® Select Boulders

Broad, flat boulders ideal for steppers, water features or specimens

Carderock® Boulders

Available in a full range of sizes and shapes for all your design

specifications

Carderock® Veneer application

Howard Hughes Medical Center - the stone was hand tooled on site

Typical housefront - random style

Typical housefront – random ashlar

Landscape walls/entrance feature

Country club community

Country Club Addition / Restoration

Carderock® Gardenwall

application

Sawed ashlar installation

Patio/sitting wall

application

Pennsylvania flagstone patio with Carderock® sitting wall

The Carderock®

Advantage

• Durable yet easy to work

• No freeze / thaw problems

• Over 85 years experience - family owned and

operated

• Year round production - no seasonal shutdowns

• Unsurpassed quality control

• Nationwide dealer network

• Design assistance always available

Typical Design Drawings

Installing Carderock® Thin Veneer

• Carderock Thin Veneer may be applied over any masonry surface, concrete block, brick, cement, etc. Painted surfaces must be sandblasted, or otherwise stripped of paint. If it is difficult to remove paint or if surface is of frame construction, nail metal lath to wall securely, 6" on center. (For exterior, vapor barrier first, then metal lath) Apply scratch coat (2 parts sand to 1 part cement) to lath. Make certain lath is covered completely with a thin coat (1/2"-3/4" thick). Use a metal scraper or small scrap of lath to lightly rake horizontal grooves in the scratch coat. Allow scratch coat to set up or cure. This is now a masonry surface to which the Thin Veneer may be applied using the following steps:

• Mix rich mortar (2 parts sand to I part cement) to a creamy consistency similar to whipped potatoes.

• Determine if stones will be laid out on ground to the desired fit prior to installation, or if trimming is required to complete finished application.

• Make certain surface is free of dirt, sand, or loose particles. If surface is dry, dampen first with a masonry brush but do not saturate. This prevents the wall from pulling the moisture from the mortar, allowing it to set up both naturally and with a better bond. For cleaner installation, begin applying stone at the top of the wall and work toward the bottom.

• Trowel rich mortar onto wall approximately 1/2" thick.

• Take clean stone and slightly dampen the back side. This frees any dust and again prevents moisture loss from mortar.

• Apply thin coat of rich mortar onto back side of stone. This fills in pits and rises in stone and creates a stronger bond with the wall.

• Press stone into mortar, rotating slightly, forcing some of the mortar to squeeze out freely. Any mortar forced out beyond the finished joint or on the stone surface itself must be removed with trowel, joint tool, or brush before the mortar is allowed to set up. Narrow joints will provide a nicer appearance.

• Use a grout bag to fill all joints (or use trowels). As the mortar stiffens, tool to the desired depth and be sure to brush off all excess.

Tri State Stone and Building Supply, Inc. is a full service stone

dealer. In addition to Carderock® Stone, we sell over 50 other

types of natural stone, including stacking wallstone, flagstone

(both pattern and irregular), veneer, decorative aggregates, and

boulders of all sizes and shapes. Our commitment to quality

products and unmatched service insures the variety of choice you

demand and ready supply for the timely completion of your

project. We do not merely broker these other materials, we stock

them in our yard for immediate delivery. If you have the need for

a natural stone product that we do not have, always ask…. we can

usually find it for you.

Other Natural Stone Products

• ideal for drystack walls

• gray to lilac range

• some moss and lichen

• beautifully weathered

• full range of thickness

available in wallstone

• steppers and boulders

also available

Pennsylvania Fieldstone

Pennsylvania Fieldstone Application

Edinburgh Waterfall Lake

Chesapeake, Virginia

This project utilized over 700 tons of Pennsylvania fieldstone in various grades –

wallstone, steppers & boulders !

This spectacular water feature is the centerpiece of an upscale community in the

Tidewater area of Virginia

The opposite side of the cascade … a 25’ waterfall built with variegated Pennsylvania

veneer

Pennsylvania Fieldstone Boulders

Pennsylvania field stone boulder application

National Gallery of Art - East Building

Washington, DC

Shenandoah Stone

•Buff to gray color

range with dark

highlights

•Wallstone in three

•Building stone

•Steppers

•Boulders

Pennsylvania flagstone

•Pattern sizes as well as

irregular shapes

•Full color

•Select blue

•Lilac

•Tread stock, sawed 6

sides and thermal treated

Arizona flagstone

A fine grained sandstone

available in a range of

beautiful pastel colors

To insert your company logo From the Insert Menu Carderock Stone Select “Picture ... ·...

Documents